17 Magnetic Pump Manufacturers in 2024
This section provides an overview for magnetic pumps as well as their applications and principles. Also, please take a look at the list of 17 magnetic pump manufacturers and their company rankings. Here are the top-ranked magnetic pump companies as of November, 2024: 1.Precision Engineering, Inc., 2.Verder Inc., 3.PTCXPUMP.
Table of Contents
Categories Related to Magnetic Pumps
Postdoctoral researcher, conducting research on the production of cathode composite particles for solid-state batteries in the Equipment Engineering Group of Osaka Prefecture University.
Belongs to the Resource and Energy Recycling Laboratory, Nagaoka University of Technology, and conducts research on the development of DDR-type zeolite membranes for CO2 separation and the capture of CO2 from digestion gas generated from sewage treatment plants.
https://researchmap.jp/eiji-hayakawa
Thesis
https://doi.org/10.3390/membranes11080623
http://www.ijcea.org/index.php?m=content&c=index&a=show&catid=109&id=1177
https://www.sciencedirect.com/science/article/abs/pii/S1387181119305529?via%3Dihub
https://www.sciencedirect.com/science/article/abs/pii/S138358661833154X?via%3Dihub
What Is a Magnet Drive Pump?
A magnet drive pump is a type of centrifugal pump that differs from other centrifugal pumps in one major characteristic. In an ordinary pump, the impeller and motor are directly connected, so a seal is required to prevent the leakage of liquid. A normal pump has a gland packing and a mechanical seal, but the gland packing needs to produce a certain amount of fluid constantly, and if the mechanical seal breaks, the fluid inside may leak.
On the other hand, the magnet pump rotates the motor and impeller via magnets, so there is no place where fluid can leak. Therefore, they can be safely used in environments with corrosive fluids.
Applications of Magnet Pumps
Magnet pumps are used in places where liquids must not leak. For example, in chemical lines such as hydrochloric acid and caustic soda. If a leak were to occur, it could cause serious damage. Therefore, gland packing is prohibited, and mechanical seals are not recommended because of the possibility of leakage in case of failure.
In such a situation, a magnet pump with zero external leakage is the most suitable pump. In addition, magnet pumps are sometimes used in ordinary water lines to reduce maintenance costs.
Principle of Magnet Pumps
Unlike ordinary pumps, magnet pumps do not have a direct connection between the motor and the impeller. Instead, the impeller is rotated via a magnet attached to the pump shaft and a magnet attached to the impeller.
As a result, there is no penetration of the shaft into the sealed container in which the impeller is housed, so there is no external leakage. As a result, the pump can be used as a normal pump despite zero external leakage.
If the impeller and sealed container are made of materials such as polypropylene or PTFE, it is possible to make a pump with high corrosion resistance that can be safely used for chemicals.
However, this structure does not allow water or oil supply to the bearings from the outside, so the bearings are lubricated and cooled by the process fluid. Therefore, a dry operation is strictly prohibited, or the bearings will seize, and the pump will be damaged. Because of these precautions, an ammeter or similar device must be installed to monitor dry running when using a magnetic drive pump.
Note that the motor size may be about one size larger than a pump with a directly connected shaft. Although there is not much difference nowadays when pumps are operated 24 hours a day, one size difference can make a big difference in power, so care should be taken.
Difference Between a Magnet Pump and a Diaphragm Pump
While a magnet pump is a volute pump that rotates an impeller, a diaphragm pump is a positive displacement pump that repeatedly suctions and discharges by reciprocating a membrane called a diaphragm. Also, while a magnet pump pumps liquid using a rotary motion, a diaphragm pump pumps liquid using a reciprocating piston motion.
Both are often used in chemical lines, but magnet pumps tend to be more hazardous for liquids. This is because the liquid is infinitely leak-proof. Diaphragm pumps, due to their structure, may leak liquid from flange surfaces, etc. Magnet pumps are superior in terms of preventing leakage. However, diaphragm pumps are easier to maintain and cost less because of their lower unit price.
Causes of Magnet Pump Failure
Although magnet pumps can pump liquid without leaking it outside, they can break down relatively easily if used improperly. Typical causes of failure are described here.
1. Running Dry
Although not limited to magnet pumps, dry running often leads to bearing damage and failure. It is important to have several people, including the operator and maintenance staff, check the pump before an operation, since it is easy to forget to let fluid flow through the pump during operation, whether after long-term pump stoppage or after temporary maintenance during trouble.
2. Clogging
There are various types of clogs. If the inlet side strainer is blocked, the pump will run dry, and the bearings will seize. Also, the pressure pumped will be less. If the outlet-side strainer is blocked, the pump is in closed operation, which also puts a load on the pump and leads to failure. If the impeller or case is clogged, the pump will not operate because it will not rotate in the first place.
Since both of these problems can easily lead to failure, extreme care must be taken when using fluids that tend to stick or are viscous.
List of 17 Magnetic Pump Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Greece
- India
- Japan
- Taiwan
-
-
-
IWAKI AMERICA INC.
Magnetic Drive Pumps
Manufacturer Overview
IWAKI AMERICA INC. is an Iwaki Pumps manufacturer established in Holliston, Massaschussets since 1974. Being part of a global network of manufacturers, the company produces magnetic drive pumps used to pump acids, caustics, and low- or high-temperature fluids. It also makes chemical metering pumps, for chemical dosing applicatications, and other technologies. Its products are used in industries like the power generation, mining, marine and the biofuels markets. In addition, the venture follows ISO9001 quality control standards.
-
-
-
-
-
Verder Inc.
Verdermag
Manufacturer Overview
Verder was founded in 1959 in Georgia as a manufacturer of pumps. The company produces various pumps for a wide range of applications. These include Veriderflex peristaltic pumps, Verderir diaphragm pumps and Packo pumps. The peristaltic pump has applications in the mining, ad and bio gas and sewage facilities whereas diaphragm pumps help with non liquid pumping. The Packo pumps consist of centrifugal, lobe and twin screw pumps having use in the industrial, food and pharmaceutical applications. There are also Microdos solenoid pumps, SSP Rotary lobe pumps for solids and Verderhus screw centrifugal pumps for low head, high flow pumping.
-
-
-
-
-
Precision Engineering, Inc.
Magnetic Pump
Manufacturer Overview
Precision Engineering, Inc., established in 1988, and headquartered in Uxbridge, Massachusetts, is a custom manufacturer of sheet metal components and assemblies. The company offers a diverse range of custom sheet metal manufacturing services, including laser cutting, waterjet cutting, forming, welding, an more. It also provides value-added services such as design, prototyping, and quality assurance. Serving industries like aerospace, defense, and medical, the company specializes in producing sheet metal enclosures, components, and electro-mechanical assemblies. Its product portfolio consists of electronic systems, elevators, and escalator systems.
-
-
-
-
-
March Manufacturing Inc.
Pumps
Manufacturer Overview
March Manufacturing Inc. was founded in 1954 and is based in Glenview, Illinois, U.S.A., and is a manufacturer Of centrifugal sealless magnetic drive pumps for the chemical, industrial, Medical, Marine, and, Solar industries The company provides different models of pumps including centrifugal, self-priming, air motor, and, submersible forms that are made from Polypropylene, Kynar, Stainless Steel, Bronze, and Cast Iron, and the pumps have applications in electrostatic painting, carbon arc furnace cooling, desalination, bio-fuels, and, battery manufacturing sectors.
-
-
-
-
-
Klaus union
Mag Drive Pumps
Manufacturer Overview
Klaus Union Inc., an American manufacturer founded in 1989 and based in Houston, Texas, specializes in sealless magnetic drive pumps. The company’s range of pumps includes sealless magnetic drive pumps, close coupled magnetic drive pumps, heavy duty sealless magnetic drive pumps, sealless heat transfer and hot oil magnetic drive pumps. These products find application in diverse industries, including the chemical industry, petrochemicals, power generation, and food and beverage. The company's design and manufacturing facilities are ISO 9001 certified and support the North American market.
-
-
-
-
-
AlphaDynamic Pumps SA
Magnetic Drive Centrifugal Pump
Manufacturer Overview
AlphaDynamic Pumps SA, established in 2004 and headquartered in Inofita Viotia,Greece, is an industrial pump designer and manufacturer. The company's products include magnetic drive centrifugal pumps, horizontal centrifugal pumps, and progressive cavity pumps. These products are used in various industrial and manufacturing processes, including agriculture, food processing, and chemical processing. In 2008, the company started exporting to overseas markets and has expanded its export sales to more than 40 countries around the world.
-
-
-
-
-
Seikow Chemical Engineering & Machinery
Corrosion Resistant Pump
Manufacturer Overview
Seikow Chemical Engineering & Machinery, Ltd. founded in 1956 and based in Akashi, Hyogo, Japan is an ISO 14001:2015 and ISO 9001:2015 certified manufacturer and supplier of corrosion-resistant chemical equipment and various water utility works. The company's product range includes specialized pumping equipment, corrosion-resistant devices, chemical processing tools, water utility devices, and water treatment equipment. These products are primarily used in chemical processing, water treatment, manufacturing, and industrial sectors. Besides product manufacturing, the company offers services such as research, development, and maintenance for its range of equipment.
-
-
-
-
-
Xiamen Whaleflo Industry And Trade Co.,Ltd.
Magnetic Pump
Manufacturer Overview
Xiamen Whaleflo Industry and Trade Co. Ltd. was established in 2005 in China and is a manufacturer of solar batteries, solar pumps, and support bilge pumps. Its product catalog includes a diverse range of offerings, with a specialization in manufacturing products such as washing kits, marine bilge pumps, micro diaphragm water pumps and agricultural sprayers. The company's products find diverse applications across various industries, including maritime, RV, agriculture, food & beverage, and more. The company operates under the brand names Waleflo, Propumpe, and Whaleflo Solar .
-
-
-
-
-
PTCXPUMP
Sealless Magnetic Drive Pumps
Manufacturer Overview
PTCXPUMP, a company founded in 1983 and headquartered in Kaohsiung City, Taiwan, is a manufacturer and supplier of sealless magnetic drive pumps. The company’s product portfolio includes sealless magnetic drive pumps and dry run protectors. Its pumps and protectors are utilized across various industries, including chemical, PCB, semiconductor, environmental technology, and offshore wind energy. The company also offers pre and post-sales support, including techinal consultations on pump design and selection, to meet client requirements for their specific applications.
-
-
-
-
-
Moniba Anand Electricals Pvt. Ltd.
Sealless Magnetic Drive Pumps
Manufacturer Overview
Moniba Anand Electricals Pvt. Ltd., founded in 1993 and headquartered in Vasai, Maharashtra, India, is a manufacturer of fluid handling components. Its product range caters to diverse industries including water and wastewater treatment, chemical processing, and power generation. Noteworthy, the company's offerings efficiently pump various fluids such as water, chemicals, food products, oil, and gas during thier application. The core products encompass canned motor pumps that prevent contamination and explosions, magnetic drive pumps for leak-free applications, and liquid ammonia pumps that resist corrosion and high temperatures. These pumps serve crucial roles in safeguarding fluid processes across a range of industries.
-
-
-
-
-
Grosvenor Worldwide Private Limited.
Magnetic pumps
Manufacturer Overview
Grosvenor Worldwide Private Limited, established in 1996 and based in Mumbai, India, is a manufacturer of industrial pumps, accessories, and dosing systems. The company’s product portfolio includes fixed output plunger dosing pumps, high pressure plunger dosing pumps, electronic dosing pump, variflow type diaphragm dosing pumps, and dosing systems, among others. The company's products find applications in diverse sectors, including the pharmaceutical industry, metal and steel plants, the paint industry, the chemical industry, and various other industries. The company is ISO 9001:2000 certified and has a technical collaboration with Grosvenor Pumps Ltd., U.K.
-
-
-
-
-
IWAKI CO., LTD.
Magnetic Drive Pumps
Manufacturer Overview
Iwaki Co., LTD was founded in 1956 in Japan. Iwaki is a producer of pumping products and water quality control systems and is the world’s leading pump manufacturer maintaining a global sales and distribution network. Serviced industries include semiconductors, water treatment, surface treatment, food processing, paper production, chemicals and pharmaceuticals.
-
-
-
-
-
Wenzhou Kaixin Pump Co.,Ltd.
Magnetic pump
Manufacturer Overview
Wenzhou Kaixin Pump Co., Ltd., established in 2012 and situated in Zhejiang, China, serves as a contemporary pump manufacturer and supplier. The company’s product portfolio includes magnetic pumps, diaphragm pumps, pipeline booster pumps, and self-priming booster pump. These pumps are used in the chemical industry, water supply and treatment industry, industrial manufacturing, pharmaceutical industry, oil and gas industry, and various other industries. The company has an annual production capacity exceeding 300,000 pumps, which are both distributed within China and exported to various countries and regions across Europe, Africa, and Southeast Asia.
-
-
-
-
-
Ingersoll Rand
Magnetically Coupled Pumps
Manufacturer Overview
Ingersoll Rand, established in 1871 and headquartered in North Carolina, USA, is a manufacturer of process, lubrication, and magnetically coupled gear pumps. The company is a manufacturer of internal gear pumps and magnetically coupled gear pumps. Its LubeTech series is used in lubrication and circulation applications, catering to various sectors such as oil and gas, food and beverage, and chemical industries. Its CC series provides high performance in limited spaces, which is ideal for package pumping skids. The company’s 1000 series offers features for easier installation, while the TR series is designed for OEM applications with reversible and pressure relief capabilities.
-
-
-
-
-
Ruhrpumpen
Mag Drive Pumps
Manufacturer Overview
Ruhrpumpen, established in 1950 and headquartered in Garza García, Mexico is a manufacturer and supplier of advanced pumping solutions. Their comprehensive product line includes centrifugal and reciprocating pumps, designed to cater to diverse industries such as oil and gas, water treatment, and chemical processing. The company’s engineering excellence, Ruhrpumpen plays a pivotal role in ensuring efficient fluid transport and management globally. With a legacy of invention and reliability, they subsidize significantly to industrial processes, providing modern solutions for fluid handling challenges across various applications.
-
-
-
-
-
Nikkora Eiko
Magnetic Drive Pump
Company Overview
Nikkora Eiko, a company founded in 1969 and based in Tokyo, Japan, is a manufacturer and supplier of pumps and water treatment technologies. The company's product portfolio includes magnetic drive pumps, bellows pumps, and diaphragm pumps BX series. These products are used in various sectors including power generation, wastewater management, and the food and beverage industry. The company is ISO 9001:2015 certified and has a sales network in various countries, including the United States, China, and the United Kingdom.
-
-
-
-
-
T-Mag Magnetic Drive Pumps
Mag Drive Pump
-
-
Magnetic Pump Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Precision Engineering, Inc. |
15.6%
|
| 2 | Verder Inc. |
10.9%
|
| 3 | March Manufacturing Inc. |
7.7%
|
| 4 | PTCXPUMP |
7.4%
|
| 5 | Klaus union |
7.4%
|
| 6 | IWAKI AMERICA INC. |
5.8%
|
| 7 | Moniba Anand Electricals Pvt. Ltd. |
5.3%
|
| 8 | Grosvenor Worldwide Private Limited. |
5.0%
|
| 9 | AlphaDynamic Pumps SA |
4.8%
|
| 10 | Seikow Chemical Engineering & Machinery |
4.8%
|
Derivation Method
The ranking is calculated based on the click share within the magnetic pump page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- IWAKI CO., LTD.: 994
- Seikow Chemical Engineering & Machinery: 196
Newly Established Company
- AlphaDynamic Pumps SA: 2008 (16 years ago)
- Grosvenor Worldwide Private Limited.: 1996 (28 years ago)
- Precision Engineering, Inc.: 1988 (36 years ago)
Company with a History
- Klaus union: 1946 (78 years ago)
- Ruhrpumpen: 1950 (74 years ago)
- Seikow Chemical Engineering & Machinery: 1956 (68 years ago)
Magnetic Pump Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Magnetic Pump Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
5 | 38.5% |
Japan
|
2 | 15.4% |
China
|
2 | 15.4% |
India
|
2 | 15.4% |
Greece
|
1 | 7.7% |
Taiwan
|
1 | 7.7% |
List of Magnetic Pump Products
18 products are listed.
Spec Japan Co., Ltd.
Self-preserved magnet capable integrated pump Y/YS-2951-W-MK
150+ people viewing
■ Overview ・ Magnet capable integrated pump ・ Self -sufficient ■ Use ・ Transportation of glycol solutions in the field of solar power ・ Temper...
Spec Japan Co., Ltd.
400 ℃ Used high temperature oil pump TOE-MH / TOE-CY-6091
100+ people viewing
Last viewed: 12 hours ago
■ Characteristics ・ Up to 160 (L/M) 70 (m) ・ 400 ℃ Used high temperature oil pump ・ Up to 430 ° C
Spec Japan Co., Ltd.
Compact design and high-pressure magnet coupling integrated type EY-4281-MK
40+ people viewing
■ Overview Magnet coupling integrated type ■ Use ・ Temperation/equipment cooling ・ Temperature of mold equipment ・ Cooling the system, machine,...
Spec Japan Co., Ltd.
Compact design and high-pressure magnet coupling integrated type EY-2251-MK
30+ people viewing
■ Use ・ Temperation/equipment cooling ・ Temperature of mold equipment ・ Cooling the system, machine, and equipment process ・ Cooling in the sem...
Spec Japan Co., Ltd.
Milk swirl pump MP110
60+ people viewing
■ Use ・ Pump for milk milking machine ・ Used in Bomatic milk milking machine ・ Up to 220 (L/M) 15 (m)
Spec Japan Co., Ltd.
Ultra-small swirl type magnet pump My2-8000-mk
50+ people viewing
■ Overview Ultra -small spiral type magnet pump ■ Use ・ Cooling of machinery, system, production process, etc. ・ Cooling of industrial laser equ...
Spec Japan Co., Ltd.
Large-capacity thermal media circulation magnet pump TOE-MA
30+ people viewing
■ Overview ・ Heat media circulation magnet pump for large capacity ・ Large flow / high temperature oil 350 ° C ・ Up to 540 (M3/H) 100 (m)
Spec Japan Co., Ltd.
High temperature water 180 ° C (220 ° C specification) Magnet pump CY-4281-MK-HT
40+ people viewing
■ Advantages ・ Used maximum temperature 180 ° C (with 220 ° C specification) ・ Magnet coupling and shavedless, maintenance -free, no leakage ・ C...
Spec Japan Co., Ltd.
Cascade type Casked type magnet pump sealless TOE-CY-6091-MK
40+ people viewing
■ Overview Cascade type magnet pump for heat media oil, sealless ■ Use ・ Mold temperature control machine ・ Cooling, heating equipment, system, ...
Spec Japan Co., Ltd.
Self-serving magnet pump integrated PY-2071-MK
40+ people viewing
■ Overview ・ Integrated magnet pump ・ Self -sufficient ・ Made of casing plastic ■ Advantages ・ Media transport including gas is also possible ...
Spec Japan Co., Ltd.
External groove volume pump ZY-1/2/3-MK without leak/maintenance due to magnet coupling
30+ people viewing
■ Overview External groove volume pump ■ Use ・ Car manufacturing/automobiles ・ Fuel transport of manufacturing equipment ・ Circulation of biofu...
Spec Japan Co., Ltd.
Self-sufficient type roller vane pump DS-MK
30+ people viewing
■ Overview ・ Roller vane pump ・ Motor integrated type ・ Magnet coupling ・ Self -sufficient type ■ Use ・ Washing applications for vehicles, e...
Spec Japan Co., Ltd.
High temperature water 180 ° C (220 ° C specification) Magnet pump NPY-2251-MK-HT
30+ people viewing
■ Advantages ・ Used maximum temperature 180 ° C (with 220 ° C specification) ・ Magnet coupling and shavedless, maintenance -free, no leakage ・ C...
Spec Japan Co., Ltd.
High temperature water 180 ° C (220 ° C specification) Magnet pump CY-6091-MK-HT
30+ people viewing
■ Advantages ・ Used maximum temperature 180 ° C (with 220 ° C specification) ・ Magnet coupling and shavedless, maintenance -free, no leakage ・ C...
