14 Cascade Pump Manufacturers in 2024
This section provides an overview for cascade pumps as well as their applications and principles. Also, please take a look at the list of 14 cascade pump manufacturers and their company rankings. Here are the top-ranked cascade pump companies as of April, 2024: 1.SANKO MACHINERY CO.,LTD., 2.Asahi Industry Co.,Ltd, 3.PerformancePro Pumps.
Table of Contents
What Are Cascade Pumps?
Cascade pumps are pumps with radial grooves (protrusions) on the periphery of the internal impeller.
The centrifugal force generated by the pressure of the vortex flow and rotation on the pump's inner wall allows the pump to pump a small amount of fluid under high pressure. Cascade pumps are a type of non-displacement pumps and are also called "vortex turbine pumps."
Cascade pumps are characterized by their ability to produce high pressure even when the flow rate of the liquid to be pumped is small.
Applications of Cascade Pumps
Applications of cascade pumps include raising well water for domestic use and degassing pumps used inside dialysis machines for medical use. Cascade pumps have a higher discharge pressure than volute pumps, which are common pumps, allowing them to discharge relatively low flow rates.
Therefore, they are good at pushing up low-viscosity liquids. The most familiar type of low viscosity liquid is water. Water is often used at home, but not in large quantities at a time.
Therefore, cascade pumps are used for well water, filter filtration, and cooling/temperature control equipment that pumps a large amount of liquid through small pipes.
Principle of Cascade Pumps
Cascade pumps form a vortex by the pushing force of the rotating impeller and centrifugal force through the radial grooves on the periphery of the internal impeller, increasing the pressure. This makes it possible to secure a large amount of pressure to transfer a small amount of liquid.
The impeller inside cascade pumps has numerous small protrusions (radial grooves). These small protrusions allow the creation of a vortex that is stronger than that of a normal impeller. The impeller is repeatedly rotated by the force of the magnet, and by the time the liquid reaches the outlet, it is pressurized and pushed out with a powerful pressure.
Cascade pumps can be further pressurized by squeezing the valve on the outlet side. Cascade pumps, which can push up liquid at high pressure even in small quantities, are also characterized by the fact that the impeller used in general rotates using the power of a permanent magnet, so its rotational power is not inferior due to wear or lack of power.
Other Information on Cascade Pumps
1. Differences Between Cascade Pumps and Volute Pumps
A pump that is often compared to cascade pumps is the volute pump. They are both non-displacement pumps and have the same impeller inside, but the difference between them is the presence or absence of radial grooves (protrusions) on the periphery.
For this reason, cascade pumps have less flow fluctuation due to pressure changes, and their predictive curves, one of the performance indicators of pumps, are higher than those of volute pumps, allowing cascade pumps to have a larger head at lower flow rates.
Another disadvantage of volute pumps is that the pump itself tends to be large due to the larger impeller volume in a multi-stage configuration. To overcome this problem, some manufacturers have made cascade pumps with cascade impellers to give that feature to cascade pumps.
2. Cascade Pumps for Dialysis
Cascade pumps are also used in medical devices for dialysis for kidney failure patients. In medical devices for dialysis, the dialysate solution is heated to around 37° C, which is equivalent to body temperature, so the pressure may be negative.
If the dialysate is not degassed, oxygen and other substances in the solution become supersaturated, which induces the generation of bubbles. If these bubbles adhere to the filtration membrane for dialysis, the efficiency of dialysis is reduced, which is undesirable.
In addition, bubbles can be dangerous if they migrate to the patient's bloodstream. Therefore, cascade pumps are widely used for degassing the solution under negative pressure, as they have a high head and excellent operational reliability. In medical equipment for dialysis, pressurized pumps are used not only for degassing but also for raising the suction pressure on the drainage side to a constant pressure.
List of 14 Cascade Pump Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Japan
- South Africa
- United Kingdom
-
-
-
-
-
-
-
Trask-Decrow Machinery, Inc.
Cascade Pumps
Distributor Overview
Trask-Decrow Machinery, Inc., founded in 1983 in Scarborough, Maine, is a distributor of Industrial Equipment and related products. The company offers a wide range of products, including industrial pumps, process air solutions, portable equipment, snowmaking machinery, and comprehensive parts and services, serving industrial, municipal, and commercial applications. It specializes in offering installation, overhaul, and repair services for both existing and new systems. The comapny also provides rental personnel and emergency rentals of various equipments.
-
-
-
-
-
SANKO MACHINERY CO.,LTD.
Cascade pump
Manufacturer Overview
Sanko Machinery Co., Ltd., founded in 1970 with headquarters in Sagamihara City, Japan, is a manufacturer of specialized packaging equipment and machinery for packets, sachets, and small bags. The company's product line includes powder and granule packaging machines, liquid and paste packaging machines, and stick packaging machines. The company offers a solution for packaging any raw material into a packet and modifies any of its products to meet the needs of each client. Its services include regular maintenance as well as overhauling a client's pre-existing packaging machines. The company serves the food processing, personal care, chemical processing, agriculture, and pharmaceutical markets.
-
-
-
-
-
Asahi Industry Co.,Ltd
CASCADE PUMP
Manufacturer Overview
Asahi Industry Co., Ltd., established in 1948 and headquartered in Gifu, Japan, is a manufacturer that is centered on the construction of air conditioning and sanitation systems. The company manufactures and sells equipment, including electrical well pumps and parts for spinning and weaving machines. It also develops products related to technological development and cutting-edge precision. Its product is designed to improve indoor air quality and sanitation, which can lead to a healthier environment. The company has obtained ISO 9001 certification for its quality assurance. It serves industries such as Building equipment contractors, Sanitation and waste treatment services, and Construction engineering.
-
-
-
-
-
Hozelock Ltd
Cascade
Manufacturer Overview
Hozelock Ltd, founded in 1959 and based in Haddenham, England, is a manufacturer of gardening, watering, and pond solutions. The company specializes in producing various products, including hose reels, watering systems, and garden sprayers. The company serves the gardening and outdoor industry, offering solutions to efficiently water and maintain gardens and outdoor spaces. Its products find applications in residential, commercial, and public green areas. The company is a part of Hazel Group, including Hazelock Exel, Trricoflex, Berthoud, and Tecnoma.
-
-
-
-
-
MARUSHICHI CO.,LTD.
KC-T CASCADE PUMP
Company Overview
Marushichi Co. Ltd., established in 1950 and based in Tokyo, Japan, is a manufacturer of industrial pumps and press molding machines. The company creates steam piston pumps, slurry-type series, and press molding machines for the industrial machinery sector. Its product line includes the cascade, self-priming, and multi-stage series. Its press division produces hydraulic forming machines for various applications, from thermosetting plastics to electronic parts. The company’s products serve multiple industries, such as oil refineries, steel mills, and power plants.
-
-
-
-
-
-
-
-
-
-
-
-
-
Pond Pro USA
Cascade Low Head pump
-
-
-
-
-
Cascade Pump Company
Cascade Pump
-
-
-
-
-
QTE TECHNOLOGIES CO.,LTD
AS ONE 1-1124-01 01RXAB-010B Cascade Pump 40/60m, 2.3/3.8L/min
Distributor Overview
QTE Engineering Company Ltd., based in Hanoi City, Vietnam, and established in 1962, is a supplier of industrial and scientific solutions. The company offers a wide range of equipment, tools, supplies, and spare parts, catering to diverse sectors, including industrial fields, research and development, MRO factories (operation, maintenance, repair), general industries, and nursing sectors. The company provides support and service across various industries like inline testing equipment, paper and packaging, environmental treatment, screen manufacturing, and energy sectors such as coal, hydropower, thermal power, and cement.
-
-
Cascade Pump Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | SANKO MACHINERY CO.,LTD. |
25.0%
|
| 2 | Asahi Industry Co.,Ltd |
16.7%
|
| 3 | Scott Direct Ltd. |
8.3%
|
| 4 | PerformancePro Pumps |
8.3%
|
| 5 | TRIPLECLICK |
8.3%
|
| 6 | PowerBee Ltd |
8.3%
|
| 7 | Trask-Decrow Machinery, Inc. |
8.3%
|
| 8 | MALHATY PUMP MFG.CO., LTD. |
8.3%
|
| 9 | MARUSHICHI CO.,LTD. |
8.3%
|
Derivation Method
The ranking is calculated based on the click share within the cascade pump page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- MALHATY PUMP MFG.CO., LTD.: 95
- Trask-Decrow Machinery, Inc.: 36
Newly Established Company
- PowerBee Ltd: 2008 (16 years ago)
- Trask-Decrow Machinery, Inc.: 1983 (41 years ago)
- Hozelock Ltd: 1959 (65 years ago)
Company with a History
- Cascade Pump Company: 1948 (76 years ago)
- Asahi Industry Co.,Ltd: 1948 (76 years ago)
- Hozelock Ltd: 1959 (65 years ago)
Cascade Pump Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Cascade Pump Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
3 | 33.3% |
Japan
|
3 | 33.3% |
United Kingdom
|
2 | 22.2% |
South Africa
|
1 | 11.1% |
List of Cascade Pump Products
10 products are listed.
IWAKI CO., LTD.
Magnet Cascade Pump MDT series can be made in high -pressure discharge of max.0.35MPa in small size
10+ people viewing
■ Sealless structure Due to the magnet -driven sealless structure, there is no need to change the seal without liquid leakage. ■ High pressure/hig...
Spec Japan Co., Ltd.
Casked type magnet type magnet pump sealless TOE-NPY-2251-MK
10+ people viewing
■ Overview ・ Cascade type magnet pump for heat media oil, sealless ・ Up to 35 (L/m) 50 (m) ■ Use ・ Mold temperature control machine ・ Cooling,...
Spec Japan Co., Ltd.
Small cascade type magnet pump sealless NPY/AY-2251-MK
■ Characteristics ・ Small cascade type magnet pump, sealless ・ Up to 35 (L/m) 50 (m) ■ Use ・ Mold temperature control machine ・ Cooling device...
Spec Japan Co., Ltd.
Small cascade type magnet pump sealless CY-4281-MK
■ Characteristics Small cascade type magnet pump, sealless ■ Advantages ・ Magnet coupling and shavedless, maintenance -free, no leakage ・ Compac...
Spec Japan Co., Ltd.
Small cascade type magnet pump sealless CY-6091-MK
■ Characteristics ・ Small cascade type magnet pump, sealless ・ Up to 200 (L/m) 90 (m) ■ Advantages ・ Magnet coupling and shavedless, maintenanc...
Spec Japan Co., Ltd.
Small cascade type magnet pump sealless CY-7091-MK
■ Characteristics ・ Small cascade type magnet pump, sealless ・ Up to 450 (L/M) 70 (m) ■ Advantages ・ Magnet coupling and shavedless, maintenanc...
Spec Japan Co., Ltd.
Casked type magnet type magnet pump sealless TOE-CY-4281-MK
■ Overview ・ Cascade type magnet pump for heat media oil, sealless ・ Up to 85 (L/M) 80 (m) ■ Use ・ Mold temperature control machine ・ Cooling,...
Spec Japan Co., Ltd.
Cascade type Casked type magnet pump sealless TOE-CY-6091-MK
10+ people viewing
■ Overview Cascade type magnet pump for heat media oil, sealless ■ Use ・ Mold temperature control machine ・ Cooling, heating equipment, system, ...
