All Categories
History
This section provides an overview for liquid level sensors as well as their applications and principles. Also, please take a look at the list of 105 liquid level sensor manufacturers and their company rankings. Here are the top-ranked liquid level sensor companies as of December, 2024: 1.Time Mark Corp., 2.Reventec, 3.MOOG.
Table of Contents
Department of Chemistry, Graduate School of Science, Tohoku University (Master of Science)
As a display engineer, engaged in Seiko Epson Corporation, Sony Corporation, Japan Display Corporation, etc.
https://researchmap.jp/tanakachihiro
https://www.linkedin.com/in/chihiro-tanaka/
A Liquid Level Sensor is a measuring device used to determine the height of the liquid level in a tank or container, helping to assess the remaining amount of liquid. Some sensors simply detect the presence or absence of liquid, while others can calculate the percentage of liquid remaining by continuously measuring the level. They are also sometimes referred to as level sensors. Some liquid sensors can be diverted to particulate solids such as sand.
In the industrial field, materials or cleaning solvents are often stored in sealed, opaque containers. Liquid Level Sensors are often used to monitor tank volume in large facilities, including oil refining plants, water treatment plants, and beverage and food manufacturing plants, as well as in pulp and paper production sites. They are also used not only to monitor residual volume but also to check the deterioration and quality of liquids.
There are various types of Liquid Level Sensors, each operating on a different principle. The following four types are representative:
A tube with a built-in wire is attached to the top and bottom of the tank, and a magnetized float, which rises and falls in tandem with the liquid level along the tube, floats on the surface of the liquid. The liquid level is measured based on the distance between the float and the wire inside the tube.
Ultrasonic waves are transmitted to the Liquid Level Sensor, and the distance to the liquid level is determined by measuring the time it takes for the waves to return.
The sensor is placed a short distance away from the tank wall and monitors the capacitance between the wall and the sensor. If there is a liquid between the sensor and the wall, the capacitance will be large; if the wall is empty, the capacitance will be small.
Here, it is assumed that the tank walls are made of metal. If the liquid is nonconductive, the contribution of the liquid-derived capacitive component increases with the height of the liquid surface.
In general, since the relative dielectric constant of a nonconductive liquid is greater than that of air, the capacitance value monitored will be larger at higher liquid surface heights and smaller at lower liquid surface heights. If this relationship is obtained in advance as a known function, the height of the Liquid Level Sensor can be determined from the actual measured values of the Sensor output.
On the other hand, if the liquid is conductive, there is no liquid-derived capacitance component, so the Liquid Level Sensor electrode can be covered with an insulator (dielectric with a constant relative permittivity) and configured to effectively detect fluctuations in the air-derived capacitance component based on changes in the liquid surface height to determine the liquid surface height in a similar manner.
The optical system comprises an infrared LED and a light-receiving part. It's designed such that infrared light reaches the light-receiving part when there is no liquid. Immersion in liquid prevents the light from reaching the light-receiving section due to refraction, allowing the detection of a rise in liquid level.
Non-contact Liquid Level Sensors are known as ultrasonic, radio wave, laser, radiation, gravimetric, and direct-viewing types.
The ultrasonic type measures the time it takes for ultrasonic waves to be reflected back from the liquid surface. While this type of measurement is independent of the type of liquid, it is vulnerable to condensation and obstacles.
The radio wave type measures the time it takes for electromagnetic waves to be reflected back from the liquid surface. While it is characterized by high environmental resistance, it is expensive and has the disadvantage of being large and heavy.
The laser type uses a semiconductor laser to measure the reflection of light from the liquid surface. The spot diameter is small, so it is not affected by obstacles in the tank. On the other hand, it is expensive and requires safety control of the laser.
The radiation type uses the transmission and absorption of gamma rays to make measurements. While it can be used in toxic, hot, and corrosive environments, it also poses a potential risk to human health and requires safety control.
The gravimetric method measures the liquid level by weighing the entire tank. While it has the advantage of not being affected by the inside of the tank, it is vulnerable to changes in the specific gravity of the liquid, such as bubbles.
The direct visual method is to check the level visually. It is the least expensive method but has the disadvantages of requiring cleaning when dirty and being difficult to automate.
The electrode-type Liquid Level Sensor (Level Switch) is an electrical level sensor with no moving parts. It is widely used for general-purpose liquid level control in various industries such as steel, food, chemical, pharmaceutical, and semiconductor industries, as well as in agricultural water, water treatment plants, and sewage treatment.
When measuring, an alternating voltage is applied between the ground electrode and the detection electrode. If the electrodes are not in contact with the liquid, no current flows, but if the electrodes are in contact with the liquid, a current flows. Using this principle, only conductive liquids can be detected.
The device consists of an electrode holder, process connection, electrode rod, and relay unit. Other than the relay unit, there are no electronic components and no moving parts, making it a simple configuration.
*Including some distributors, etc.
Sort by Features
Sort by Area
Moog Inc. was incorporated in 1951 and is headquartered in East Aurora, New York. The company designs manufactures and integrates precision motion and fluid controls and control systems for customers including OEMS in industries such as aerospace, defense, industrial machinery, motorsports, and construction. The company’s product offerings include both systems and components. Examples of systems include actuation systems, naval systems, turreted weapon systems, and space vehicles. Examples of components include manifolds, slip rings, actuators, and servo actuators.
Time Mark Corp., founded in 1972 and based in Tulsa, Oklahoma, is a manufacturer of special control devices and related accessories for various industrial applications. The company's product folio includes 3-phase monitors and testers, current monitors, liquid level controls, transformers, and, transducers that have a variety of uses in digital transmission, electronics gadgets, appliances, energy, and, electrical industries. The company also offers a 5-year warranty on 3-Phase Monitors and all other standard products have a 1-year warranty.
L-com was founded in 1982 and is headquartered in North Andover, Massachusetts. The company serves many industries including electronics, medical, industrial automation, military, and telecommunications a manufacturer and servicer of wired and wireless communications products. The company’s custom product capabilities include customized cable assemblies, WiFi antennas, adapters, and surge protectors. Through its parent company, Infinite Electronics, the company offers a broad range of RF components and assemblies to over 100,000 global customers.
Barksdale, established in 1949 and headquartered in Reichelsheim, Germany, is a manufacturer of industrial control and regulator products. The comprehensive product line includes pressure, transducers, switches, temperature, level, and flow controls that offer precise monitoring, efficient regulation, and enhanced operational safety. These products find application in industries such as oil and gas, manufacturing, energy, and transportation. The company's accurate monitoring instruments optimize processes, guarantee operational efficiency, and maintain safety standards, all of which add to the smooth running of complex industrial systems.
Whitman Controls is a UK-based manufacturer and supplier specializing in miniature pressure, vacuum, temperature, and liquid level switches and sensors. The company’s product portfolio includes pressure switches, pressure transmitters, vacuum switches temperature sensors, and more. Their sensors can be tailored to specific applications, media environments, and more, to meet specific customer requirements. The company’s products serve various industries, including OEM manufacturing, oil & gas, HVAC, food and beverage, among others.Holding ISO 9001 certification, the company offers products tailored to meet exact specifications and performance expectations.
Standex Electronics is a worldwide market leader in the design, development and manufacture of standard reed switch-based sensor solutions and custom electro-magnetic components, including magnetics products. Their company history dating back to 1969, Standex has provided their service to a high customer base globally for more than 50 years. The company has high-quality standards, work by the approach of "partner, solve, deliver", focus on a customer driven innovation and commitment to absolute customer satisfaction. Their diverse capabilities and dynamic solutions allow them the ability to achieve the highest quality levels of efficiency and productivity. Sustainability is a high focus of the Standex product line, with long-term sustainability improvements continuing to drive consistent technological growth. Green switching applications are a growing demand for their customers, and they ensure to deliver.
Littlefuse was founded in 1927 and headquartered in the United States. Littlefuse is a diversified industrial technology manufacturing company with customers globally. Littlefuse has products segments which are electronic, industrial, and transportation. Electronic segment products include fuses and fuse accessories, positive temperature coefficient resettable fuses, polymer electrostatic discharge suppressors, and varistors. Transportation products include blade, resettable, and high-current and high-voltage fuses, as well as battery cable protectors; fuses, switches, relays, circuit breakers, and power distribution modules. The Industrial segment offerings include contactors, transformers, and temperature sensors for use in renewable energy and energy storage systems, electric vehicle infrastructure, HVAC systems.
Massa Products Corporation, based in Massachusetts, United States, is a manufacturer and supplier specializing in ultrasonic sensor technology. Founded in 1945 it serves industries such as Oceanographic, the chemical and allied, the oil patch and mining, among others. It engineers and manufactures sonar and ultrasonic products for use in the water and air. The company is certified in ISO 9001:2015 and its products catalog includes Ultrasonic Level Sensors For Distance Measurement, Industrial Ultrasonic Air Transducers, among others.
Electro-Sensors, Inc. operates as a manufacturer of precision sensors and monitoring systems, established in 1968 and headquartered in Minnesota. The company specializes in providing products and services for industries such as industrial manufacturing, agriculture, and material handling.Its offerings include speed sensors, temperature sensors, and hazard monitoring systems. These products are used for precision monitoring and safety assurance, enhancing operational efficiency and safety measures in the industries it serves through its precision sensor and monitoring solutions.
O'Keefe Controls Co., founded in Monroe, CT in 1975 is a manufacturer of precision orifices and fluid control devices used in a wide range of liquid and gas flow metering applications. The company's product portfolio includes low restrictors and regulators for precise control of flow rates, Single and multiple orifice plates for accurate flow measurement, Needle valves and flow control valves for precise flow adjustment and Gas Flow Measurement Devices. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
The company NOSHOK was founded in the year 1967 and they are located in the United States of America in the state of Ohio in the city of Berea. NOSHOK provides many different products such as pressure gauges, transmitters, transducers, pressure switches, level transmitters, temperature devices, valves, diaphram seals, digital indicators, KING filters, and additional accessories. Many of these products have been introduced by the company over time and they continue to introduce many new products.
Krueger Sentry Gauge Co. has its main office located in Green Bay, Wisconsin, is known as a manufacturer of Liquid-Level Gauge since 1942. The company serves petroleum, wastewater, aviation, chemical, agricultural industries, among others with products including level-gauges, overfill alert gauges, leak detection gauges as well as related accessories. The company´s leak detection gauge is a vertical type monitor and is designed for maximum durability, minimal upkeep, and quick installation while their overfill gauge visually alerts you on a tank´s fullness and is also designed such that installation is easily executed.
KELLER America, Inc. was founded in 1975 and based in Newport News, Virginia. The company’s founder developed the first integrated silicon pressure measuring cell and since its founding, the company has been a developer in pressure measurement solutions for numerous industries including automotive, aerospace, and power generation. In addition to optional accessories, the company has 9 main product lines. Among these are OEM Sensors Transducers & Transmitters, Pressure Calibrators, Digital Pressure Gauges, Pressure Pumps, and Custom Pressure Solutions.
Comus International, a company founded in 1978 and headquartered in New Jersey, United States, is a manufacturer of electronic and electromechanical products. The company offers a wide range of products that include proximity sensors, tilt and tip-over switches, and solid-state relays. These products are used in various industries, including automotive, aerospace, and industrial automation for applications such as motion sensing, position detection, and safety control systems. The company also offers customer services that include technical support and assistance to meet customers’ requirements.
SSI Technologies LCC, established in 1974 with headquarters in the USA, is a manufacturer of electronic sensors. The company's display product line includes level gauges, digital level sensors, pressure sensors, liquid level sensors, and DEF/Urea sensing solutions. The company's products range from heavy truck weight sensing devices to liquid level sensors for barrels and tanks. It serves many industries, including the motorcycle, automotive, mass transit, and material handling markets, among many others.
OMEGA Engineering Inc., founded in Norwalk, CT, in 1962 is a manufacturer of products used to measure temperature and humidity, flow and level, and pressure. The company's product portfolio includes thermocouple probes and assemblies, pressure gauges and switches, and air velocity measurement systems, wireless systems and portable optic sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company also offers customer services that include support, custom research projects and customized services.
Turck, Inc., established in 1965 and located in Mülheim, Germany, serves as a manufacturer of industrial automation solutions designed to enhance productivity and accuracy in the logistics field. The company's product portfolio includes sensors, power supplies, industrial controls, field logic controllers, and interface technology. Its products are utilized in the automotive, pharmaceutical, packaging, energy, and chemical industries. These products offer consistent automation, safety, and efficiency in oil and gas plants. Also, the company provides technical expertise and customized customer services.
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
Pepperl+Fuchs, Inc. was founded in Mannheim, Germany in 1945 developing the forerunner of the proximity switch. Pepperl+Fuchs continues to develop proximity sensors as well as other industrial sensors including ultrasonic sensors, rotary encoders, positioning systems, display and signal processing, vibration monitoring, industrial communication, and signal processing as well as related accessories and software. Explosive protection products include safety barriers, surge protection, wireless solutions, HMI systems, power supplies, electrical explosion protection equipment, level measurement, and related software.
ifm efector (ifm) is a subsidiary of ifm electronic, founded in Germany in 1969. ifm has developed, manufactured and marketed sensors and controls technology to industries that include assembly and robotics, automotive, material handling, metal forming, mobile equipment, plastics, and food and beverage. Ifm produces sensors, condition monitoring equipment, image processing, safety technology, industrial communication, IO-link, systems for mobile machines, displays, software, connection technology, voltage supplies, as well as other accessories.
FPI Sensors are float-level switch and liquid-level sensor manufacturers and are renowned for delivering top-tier OEM products at competitive prices. The supplier has established a unique "Micro Factory" structure that drives customer service and manufacturing precision. The dedicated teams, responsible for individual customers, nurture intimate knowledge of preferences to ensure personalized liquid-level sensor solutions. This structure fosters meticulous workmanship, customer satisfaction, and the fulfillment of specific requirements. Since 2007, FPI Sensors has been dedicated to providing the highest-quality liquid level switches and continuous output sensors, serving diverse industries from oil/water separators to medical equipment.
Honeywell International Inc. was founded in 1885 and headquartered in Charlotte, North Carolina. Honeywell is a diversified technology and manufacturing company to global customers in many industries such as aerospace, building technologies, performance materials, manufacturing, and safety. Honeywell produces hardware and software solutions for each industry it serves. In building technologies, Honeywell designs access controls, electrical and wiring, fire life safety, and employee training services. In aerospace, Honeywell designs cockpit systems and displays, engines, cabin management and cleaning, and health and usage monitoring.
Madison Company, Inc. founded in Branford, Connecticut, USA, in 1959, is a manufacturer of float switches and liquid level sensor solutions. The company manufactures products including reed switches, liquid-level switches, visual indicators, and hydrostatic pressure sensors. Its M6002 miniature PVC sensor is chemical-resistant and is used to deal with corrosive liquids. The company’s products are ISO-9001 certified and in 2009 it acquired FloodMaster which offers water leak detection solutions. GHM, Citec, and MEYLE are its distributors.
Clark Solutions, established in 1962 and headquartered in Massachusetts, United States, is a supplier and distributor of fluid handling products. The company offers a wide range of products, including pumps, valves, and instruments, among others, serving industries such as chemical processing, pharmaceuticals, and food and beverage. These industries rely on the company's solutions for precise fluid control in tasks like transferring, mixing, and flow control, ensuring the accuracy and efficiency of operations.
Resensys, LLC. is an American manufacturer and supplier of wireless sensor network technology products that was established in 2008 in College Park, Maryland. The company’s product portfolio includes its SENIMAX brand wireless gateway for collecting and transmitting sensor data, as well as its SENSPOT wireless sensors for measuring various physical parameters. It also offers its SENCLOUD brand web-based data visualization and analysis platform, along with its SENBRIDGE data integration software for third-party apps and systems. Aside from its products, the company provides installation, calibration, and personnel training services.
Fluid Components International, founded in San Marcos, CA, in 1964 is a manufacturer of thermal mass flow meters, flow switches and level switches for industrial process measurement applications. The company's product portfolio includes Flow Switch, Flow Conditioners, Gas Flow Meter, Level Measurement Products, and Flow Straighteners. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also provides services including national distribution, product selection, customized services, technical support and customer service.
Vertiv Group Corp. founded in Columbus, OH, in 2016 is a supplier of infrastructure technologies, hardware, software, analytics and ongoing services. The company's product portfolio includes Uninterruptible Power Supplies (UPS)DC Power SystemsPower DistributionStatic Transfer SwitchesSwitchgear and Switchboard. the company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. They operate in 130 countries and also provide services including product selection, installation, preventative maintenance, troubleshooting, and repair.
OPW ENGINEERED SYSTEMS CORPORATE was founded in 1892 and is based in Hamilton, Ohio, USA, is a supplier of fluid-handling solutions and systems for various industrial and commercial applications. The company provides clean energy solutions for the handling, transport, and storage of alternative energy, fluid transfer solutions for handling critical hazardous chemicals and dry goods, retail fueling solutions for conventional and alternative fuels, and, vehicle wash solutions. They also offer loading systems, rail & transport tank truck equipment, spill containers, overfill prevention devices, and swivels for the chemical, transportation, vehicle wash, and fuel handling sectors.
TDK Electronics, established in 1935 and headquartered in Tokyo, Japan, is a developer, manufacturer of electronic components and systems. Its product portfolio spans capacitors, ferrites, and inductors, including piezo and protection devices. The company also offers sensors and sensor systems, covering temperature, pressure, magnetic, and MEMS sensors. Furthermore, TDK provides power supplies, energy devices, magnetic heads, and more, all branded under TDK, EPCOS, InvenSense, Micronas, Tronics, and TDK-Lambda, catering to diverse electronic needs. The company operates about 20 development and manufacturing sites, along with a network of design, manufacturing locations, and sales offices situated in Asia, Europe, North America, and South America.
KROHNE Group began in Duisburg, Germany in 1921 as a producer of variable area flowmeters. Today KROHNE isa a provider of industrial measurement products, solutions, and services. KROHNE services the chemical, food & beverage, life sciences, marine, metal & mining, nuclear, oil & gas, power generation, pulp & paper, water & wastewater, and sustainable energies industries. KROHNE product lines include tools for flow, level, temperature, and pressure measurement as well as process analytics and smart flow control. KROHNE offers full solutions for flow metering, monitoring, and wireless and remote metering applications.
Micro Sensor is a Baoji, Shaanxi, China-based manufacturer of OEM, ODM, and custom-designed transmitters, flowmeters, and sensors used for industrial automation, established in 1993. The production line has level, temperature, and pressure transmitters, pressure sensors, flowmeters, and accessories, including valves, indicators, protectors, and connection boxes for pressure sensors and transmitters used in the HVAC, marine, water, oil, and gas industries. The company has a subsidiary, Micro Sensor GmbH, based in Essen, German.
SensorsONE Ltd., founded in the UK, in 2006 is a manufacturer of measurement instruments and sensors. The company’s product portfolio includes temperature sensors, pressure sensors, proximity sensors that detect the presence or absence of objects without direct contact, level sensors that enable precise monitoring of liquid levels in tanks and containers and motion sensors that detect movement and acceleration. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation.
Siemens began in 1847 and is headquartered in Munich, Germany. Siemens focuses in automation and digitalization technology and operates globally. Siemens’s 5 operating segments are digital industries, smart infrastructure, mobility, Siemens Healthineers, and Siemens Financial Services. Siemens Financial Services provides debt and equity investment as well as financing solutions. Siemens Healthineers is a medical devices company that provides products and consulting. Mobility includes passenger and freight transportation. Smart infrastructure includes full solutions for electrification. Digital industries offer both software and hardware for industries and production efficiency.
JBJ Techniques Limited, founded in 1974 and based in Redhill, Surrey, is a manufacturer of industrial machinery. It offers mechanical and fluid power products, including couplings/bell housings, gearboxes/ clutches, printed wiring boards, pumps/ motors, seals, level indicators and more. The company offers ISO-9001-certified and BS ISO-45001:2018 certified goods and services from specification to technical support, as well as, manufacture to after-sales support to its customers in the UK and across the globe.
The Azbil Corporation (formerly the Yamatak Corporation) aims to realize safety, comfort, and fulfillment in people's lives and contribute to global environmental preservation through "human-centered" automation. They provide their customers with timely solutions via an integrated structure that extends from planning and development to maintenance and service, capable of responding rapidly to customer needs.
SONOTEC GmbH, established in 1991, is a German manufacturer based in Halle (Saale), Saxony-Anhalt, specializing in ultrasonic measurement technology solutions. The company offers non-invasive flow meters and air bubble detectors for fluid monitoring in medical technologies, bioprocessing, and the semiconductor industry. It also supplies ultrasonic testing devices used for condition monitoring, inspections, predictive maintenance, tightness testing, and ultrasonic leak detection. Additionally, the company engages in non-destructive testing (NDT) using ultrasound, primarily for flaw detection, thickness measurements, and weld seam testing, commonly applied in industries like aerospace, aviation, power plants, as well as other sectors including pipelines, railways, and sheet metal inspections.
Danfoss, established in 1933 and headquartered in Nordborg, Denmark, is a manufacturer specializing in Climate Solutions, Drives, and Power Solutions. The company's solutions find applications in various sectors such as refrigeration, heating, and both off- and on-highway equipment. It also offers solutions for renewable energy sources like solar and wind power, alongside district-energy infrastructure for urban areas. Its digital displacement pump received both the Powertrain Product of the Year and Achievement of the Year in the 2022 Diesel Progress Summit Awards.
Adeunis is a manufacturer and developer of wireless technology products and related devices originally established in 1996 and headquartered in Crolles, France. The company specializes in products designed to work within the Internet of Things (IoT) B2B sectors. These include various sensors, modems, and applications for consolidating system controls and optimizing organization. It also offers system setup tools and services such as personnel training and consultation. The company’s products chiefly serve clients involved in the construction and design of smart cities and environments.
Gill Sensors & Controls Limited, established in 1987 and headquartered in Lymington, England, is a manufacturer of measurement sensors and gas engine controls. The company designs and manufactures measurement sensors, relied upon to inform and control processes used across diverse industries, including defence, marine and manufacturing industry. Its range encompasses specialist level sensing, position sensors and engine control products for the process control. It also manufactures a range of ultrasonic anemometers and weather stations. The company's accreditations include ISO certifications for quality and environmental, and CSA certificate of compliance.
Intellisense Microelectronics Xiamen Ltd. is a manufacturer of various industrial sensors that was founded in 2010 in Fujian, China. The company produces sensors with a wide range of applications such as in automation, smart home operations, and industrial processes. Its products include liquid level sensors, photoelectric sensors for object detection, and CMOS integrated sensors that can be programmed for various applications. The company also offers product design as well as customization services for clients with unique projects. Its products are primarily used in industrial automation, healthcare, and defense R&D.
Kisters is a developer and manufacturer of hardware, software, and IT products for environmental monitoring applications established in Aachen, Germany, in 1963. The company’s software products include its Embedded Engineer-branded platform for generating ANSI C or C++ code from unified modeling language (UML) structures, and its LemonTree-branded utility for streamlining the workflow of modeling teams. It also offers instruments and equipment for monitoring environmental parameters such as sensors and transmitters. The company operates internationally with its North American subsidiary, Kisters North America, headquartered in Florida, USA.
PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH, established in 1976 and based in Wendelstein, Germany, is a manufacturer and supplier of reed switches and sensor technology. The company’s product portfolio includes power reed switches, stainless steel floats, and flange mounts. These products are used in various applications, including automation, sports and fitness equipment, and household appliances such as washing machines and refrigerators. The company is DIN ISO 9001:2015 certified, with global sales partners in the United States, China, and South Africa.
GHM GROUP, founded in 1963 and located in Wurttemberg, Germany, is a developer and manufacturer of measurement and control technology. Its diverse range of products includes sensors, industrial electronics, portable instruments, electrical connections, and programming devices. These products are utilized across industries for monitoring, measuring, and controlling parameters such as temperature, pressure, humidity, and flow. GHM GROUP's technology is used for automation, process control, data acquisition, and quality assurance in manufacturing, environmental monitoring, HVAC, and other sectors.
SEBA Hydrometrie GmbH & Co. KG, founded in 1967 and headquartered in Kaufbeuren, Germany, in cooperation with W.A.S. Braunschweig and Teledyne RDI, San Diego, United States, is a developer and manufacturer of hydrometric measuring and monitoring solutions. The company manufactures the portable relative pressure measuring data logger Dipper-PT, the NetLogCom universal and flexible data logger with an integrated 4G modem and 100 configurable input channels, and mobile hand-held depth-sounding devices for measuring the liquid level down to the bottom in groundwater.
elobau Elektrobauelemente GmbH & Co., founded in 1972 with headquarters in Germany, is a manufacturer of contactless sensor technology, operator controls, machine safety, and level measurement. The company's products include multi-axis joysticks, multi-function handles, push buttons, sensor components, and continuous level measurement. elobau’s products are used in both mobile (off-highway) and industrial applications. The company’s products can be found in aircraft, off-road vehicles, agricultural machinery, and industrial machinery. elobau Elektrobauelemente GmbH & Co. has been carbon neutral since 2010.
AFRISO-EURO-INDEX, founded in 1869 and based in Güglingen, Germany, serves as a manufacturer and supplier of measuring, control, and monitoring devices Its products are utilized for heating, ventilation, air conditioning, water, and environmental technology, and these offerings include pressure gauges, temperature sensors, level indicators, flow meters, and gas detectors. These products find applications in diverse sectors, enhancing safety, efficiency, and comfort in both industrial and building contexts. With ISO 9001:2015 and ISO 14001:2015 certifications, the company emphasizes quality and environmental management.
Terranova Instruments Group, established in 1974 and headquartered in Milan, Italy, is a manufacturer that designs and manufactures measurement and control instruments The company offers a range of products, including the T7N Series, T7D Series, T79 Series, T76 Series, and T72 Pressure Series. It also provides T72 submersible level series, T7T Series, and T7I Series. It offers a multipoint solution that provides mounting simplicity and saves connection cables. The company has achieved ISO 9001:2015 and OHSAS 18001:2007 certification. It serves a diverse range of industries such as pulp and paper, wastewater, FnB, chemical, and marine.
Aplisens S.A., founded in 1992, and headquartered in Warsaw, Mazowieckie, Poland, is a manufacturer of process instrumentation. The company offers a diverse range of control and measurement products, including differential pressure transmitters, hydrostatic level probes, level transmitters, valves, and digital indicators. It also offers power supplies, separators, and gauges. It is certified with ISO 9001:2015 and HART, and also provides Quality Assurance Notifications for ATEX compliance, ensuring product safety in potentially explosive environments.
Holykell Sensor Inc., established in 2001 and based in Hunan, China, is a manufacturer of industrial measuring instruments. The company produces industrial measuring instruments such as pressure & level sensors, temperature & wireless sensors, flow meters and one-stop solutions. These products are utilized in chemical, food, marine, waste water and oil & gas among other industries. It also provides OEM & ODM services along with customized solutions. The company has obtained various quality certifications including CE, ATEX, RoHS and ISO 9001, 45001 and 14001.
Dongguan Dadi Electronic Technology Co., Ltd., established in 2006, based in Dongguan, China, is a manufacturer and supplier of infrared sensors and safety light curtains. The safety light curtains include measurement & automation light curtains, multi-area safety light curtains, and accessories such as support columns, deflection mirrors, curtain controllers, adjustable brackets, and customizable cables. The sensors are ultrasonic sensors, color sensors, laser displacement sensors, photoelectric sensors, and slot-type sensors. The company also offers vehicle separators, safety laser scanners, mechanical bolts for safety switches, as well as safety relays. The company is certified by CE, TUC, RoHS, and ISO 9001.
Hunan Rika Electronic Tech Co Ltd, founded in the year 2013 and based in Changsha, China is a developer and manufacturer, and supplier of weather and temperature sensors. The product portfolio includes wind, radiation, ambient, soil, and water sensor, rain gauge, data logger, weather stations, radiation shields, and accessories. The company also offers complete environmental monitoring and meteorological solutions. The products are used in multiple industries which include air quality monitoring, water treatment, solar PV industry, hydrological monitoring, and smart agriculture.
Shenzhen EPT Technology Co., Ltd., was founded in 2003, is a manufacturer of optical water level detection sensor, capacitance level sensor, flow sensor and tilt sensor’s, based in China. The company has set up offices in Sichuan, Shanghai and Yuyao, which are responsibles for its new product development and global market expansion and services. It has strong technical strength with more than 20 patent product certificates, and has been designated as a professional manufacturer by the Ministry of Electrical and Mechanical Services.
Reventec, situated in Wiltshire, UK, manufacturer tailor-made programmable sensors for challenging environments, notably in top-tier motorsports, automotive, and military domains. The company provides a mechanical and electronic design consultancy, while the emphasis centers on crafting customized, low-quantity sensor solutions, enabling swift responses to time-sensitive projects. Reventec stands as a trusted ally to Formula 1 and America’s Cup teams, their sensors gaining worldwide acclaim. The Salisbury facility houses manufacturing, R&D, and design, ensuring seamless transitions from CAD to production. Reventec serves motorsport, defense, UAV, industrial automation, robotics, and automotive sectors with unmatched agility and expertise.
SMD Fluid Controls, established in 1979 and based in Wallingford, United States, operates as a manufacturer and supplier specializing in fluid level and flow control solutions. The company’s primary attention includes designing and producing a diverse range of customized float switches, level sensors, and flow meters. SMD Fluid Controls' advanced products play a pivotal role in various industries, including industrial automation, automotive, and water management, facilitating particular and dependable fluid monitoring and control. For their engineering proficiency and quality, SMD Fluid Controls subsidizes significantly to optimizing fluid handling processes and ensuring operational efficiency.
Automation Products, Inc. - Dynatrol Division, founded in 1956 and located in Houston, Texas, is a manufacturer of process measurement control, systems, switches, and equipment. The company’s products include density systems, solid-level switches, viscosity systems, liquid-level switches, and interface-level detectors. The products are used in wood processing, textile, bulk solids measurement, food processing, and beverage industries. The company manufactures products based on a vibration principle featuring online systems and level-indicating instruments.
Fluidwell Bv. is a Dutch ATEX and IECEx-certified manufacturer of process industry electronics that was established in Veghel, Noord-Brabant, in 1993. The company produces level measurement products such as level transmitters, pressure measurement products such as pressure alarms, and panel mounted instruments such as flow calculators. It also offers explosion-proof instruments for process control applications, including flow rate indicators and data loggers. The company’s products are commonly used in the petrochemical, oil and gas, and wastewater treatment industries.
KTR Systems GmbH, established in 1959, is a manufacturer headquartered in Rheine, Germany, specializing in industrial drive technology. The company offers a range of mechanical components for drive technology, including couplings and torque limiters, designed to enhance energy efficiency and power density. In 2014, KTR Brake Systems GmbH was established as a subsidiary, offering hydraulic brake systems known as KTR-STOP and electromechanical brake systems called EMB-STOP. Additionally, KTR Systems develops hydraulic components and provides cooling systems for stationary hydraulics and mobile machines. The company's products are utilized in various industries, including the wind power, agriculture, machine tools, and automation sectors.
Qualitrol Company LLC is based in Fairport, New York, USA, and is a manufacturer of monitoring products for electrical products that was established in 1945 before its acquisition by the Fortive Corporation in 2016. The company’s products include monitor systems and sensors for analyzing physical parameters such as vibration, moisture, or partial discharges. It also offers software for its portfolio products for monitoring trends, diagnosing device health, or optimizing performance. The company’s products are commonly used in industrial automation, with additional application in the power distribution and government sectors.
Georg Fischer Piping Systems Pvt. Ltd is headquartered in Mumbai, India, and is an ISO 9001-certified manufacturer of plastic as well as metal piping systems that was established in 2007 as a subsidiary of Georg Fischer AG. The company produces piping system components and complete systems for industrial or automation operations. These products include pipes, valves, and fittings made from polyethylene (PE) or polypropylene (PP). It offers automation system components including actuators, sensors, and multi-parameter controllers. The company also offers additional services, such as custom engineering, prefabrication, and installation.
Monitor Technologies LLC was founded by George Gruber in Port Sanilac, Michigan in 1958. The ISO 9001-certified company is a manufacturer of indicators and control equipment for industries including plastic processing, cement & aggregates, feed processing, grain processing, and food processing. The company sells domestically and internationally through authorized representatives. The company’s products include point level indicators & controls, dust leak indicators & particulate emission trend monitors, inventory management software, and various flow measurement devices.
Oil-Rite Corporation was founded in 1933 and is based in Manitowoc, Wisconsin. Oil-Rite is a designer and manufacturer of lubrication equipment used in industries as diverse as automotive, machining, and baking, as well as hydroelectric dams. Oil-Rite’s featured products include constant level lubricators, level gages, feed valves, and oil systems. Additional products include grease and oil dispensers, various valves, and sights. Oil-Rite also offers support including usage, lubrication levels, maintenance, and product selection for specific needs.
BinMaster is based in Lincoln, Nebraska, USA, and is a manufacturer of inventory management systems and level indicators that was established in 1965 as a brand line of Garner Industries. The company produces continuous and point level indicators, organizational software, and wireless communication devices. These include RL acoustic sensors that measure and map material volume, software for monitoring facility-wide level sensors, and vibrating rod switches for low or high level detection. The company mainly serves clients in the mining, energy production, and pharmaceutical industries.
Airmar Technology Corporation is a manufacturer of ultrasonic transducers and sensors that was established in Milford, New Hampshire, USA, in 1982. The company’s product lineup includes air ranging transducers for aerospace and automotive applications, and weather station instruments for gauging physical parameters such as wind direction or speed. It also offers marine transducers for use in navigation, surveying, and fishing. The company’s products are commonly used in the industrial robotics, environmental monitoring, and recreational markets.
Viatran is based in Franklin, Massachusetts, USA, and is a manufacturer of rugged pressure transmitters for the industrial sector that was established in 1965 before becoming a division of Scott Feltzer Company in 2006. The company’s products include pressure transducers for measuring with high accuracy, hazardous location transmitters for flame- or explosion-proof applications, and hammer union pressure transmitters designed to operate in corrosive or harsh environments. The company mainly serves clients in the oil and gas, wastewater treatment, and power generation industries.
Jogler, LLC, originally known as Jogler, Inc., was founded in 1965, and is a manufacturer of process control instrumentation located in Baton Rouge, Louisiana. The company specializes in level control devices, such as quality magnetic level gauges, magnetostrictive transmitters, point-level switches, and other accessories. It is also a manufacturer of CNC machines, welding machines, and glass lathes. The company offers X-ray, post-weld heat treatment, and epoxy painting services, and works with a network of representatives in various parts of the world.
SST Sensing Ltd is an ISO 9001-certified manufacturer and supplier of oxygen and liquid level sensors established in 2002 in Coatbridge, Scotland, UK. The company specializes in products for detecting the presence, levels, and absence of liquids or gasses, including hazardous area-approved liquid level switches, carbon dioxide sensors, and optical liquid level switches. The company also offers customization, calibration, and repair services. It mainly serves clients in the aviation, transportation, and industrial processing sectors.
Montwill, established in 1987 and headquartered in Germany, is a manufacturer of digital measuring instruments based on LED technology. The company’s products include panel meters and digital bar graph indicators that offer a graphic representation of signal strength through bar length. Its options include 5-digit frequency indicators with adjustable 270° display and direct current/voltage indicators with optional display modes. The company also offers LED displays, tricolor indicators, and interface devices. Its products support hat rail mounting and include digital indicators with added functionalities like sensor supply, analog outputs, and multiple switching points.
Introtek International, established in 1981 and headquartered in New York, New York, United States, is a manufacturer of medical sensors. The company's products include air bubble detectors, drip chamber level sensors, and IntroPro occlusion detectors. These products are used in the manufacture of medical equipment and other sensitive equipment used in aerospace. It offers solutions for non-invasive ultrasonic sensors, from air bubble detection to contactless monitoring of liquid levels. It primarily works with original equipment manufacturers to provide custom solutions that are cost-effective for volume production.
Rittmeyer AG (a Brugg Group company), founded in 1904 with headquarters in Baar, Zug, Switzerland, is an instrumentation and automation solutions developer and manufacturer. As a provider of instrumentation solutions for hydropower and water management, the company's primary product lines include application-smart encoders, transducers, and pressure transmitters (level sensors). It also provides a closed pipe, externally mounted flow sensors, immersion probes, and IoT-capable and existing system-compatible instrumentation controllers. The company's services include consulting, positioning solution installation, and operator training.
Anderson-Negele is based in Fultonville, New York, USA, and is a manufacturer of sensors for process analysis and control applications that was established in 2004 following the merger of Anderson Instrument Company and Negele Messtechnik GmbH. The company’s product lineup includes conductivity sensors, turbidity sensors, and temperature sensors. It also offers bulk tank recorders, process recorders, and adaptors or fittings for a range of connector types. The company chiefly serves clients in the recreational beverages, biopharmaceuticals, and food processing industries.
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
Bürkert Fluid Control Systems, founded in 1946 and headquartered in Ingelfingen, Germany, is a manufacturer of liquid and gas measurement and control systems. Its product range includes solenoid valves for fluid power systems, process and control valves for managing flow, pressure, and temperature, pneumatics and process interfaces for automation control, sensors, transmitters, and controllers for measuring physical and chemical parameters, and MicroFluidics solutions for precise fluid control. Its products serve diverse industries like breweries, labs, medical, and aerospace.
STÜBBE, established in 1925 and headquartered in Vlotho, Germany, is a manufacturer of pumps, valves, and instrumentation systems made of thermoplastics. The company's range of products includes pumps, valves, instrumentation systems, and ball valves. It also provides round-the-clock service and spare parts delivery for customers. The company's products are chemical resistant and can withstand exposure to various chemicals and chemical mixtures. The products find ideal applications in various industries, including environmental technology, surface technology, chemical industry, metallurgy, and mining.
LUBE Corporation, established in 1964 and based in Chiyodaku, Tokyo, Japan, is a manufacturer and supplier of lubrication equipment. The company's product range includes World standard LHL system grease lubrication system, Battery drive grease kit, Main pipe decompression system, Progress method, and Multi-Port Centralized Lubrication System. These products ensure optimal lubrication and protection for machinery. It serves industries such as manufacturing, automation, machinery design, and environmental safety. The company also offers services in development, manufacturing, sales, and after-sales service for its range of equipment.
Seetru Limited was founded in 1949 and is headquartered in Bristol, England is a manufacturer of safety relief valves and liquid level gauges. The company offers an array of products including Pressure Relief Valves, sight gauges, and magnetic float by-pass gauges. These valves meet important international standards which include ISO 4126 and ASME Section VIII design codes as well as type test approvals from the National Board. These products have applications in industrial gas suppliers, marine, and petrochemical industries.
NPP SENSOR LLC, founded in 1992 and headquartered in Zarechny, Russia, is a manufacturer and supplier of instruments and systems for explosive media control. The company’s product portfolio includes SENS measurement systems, solenoid valves, and information indicator boards. These products find ideal applications in various industries, including chemical manufacturing, transportation and logistics, and the oil and gas industry. The company also offers customer support and services such as customization, operation manuals, and detailed product catalogs, and it is ISO 9001:2015 certified for its quality management system.
King Pigeon Hi-Tech.Co.,Ltd., founded in 2005 and headquartered in Shenzhen, China, is a manufacturer and supplier of IoT (Internet of Things) devices. The company's product portfolio includes 4G edge routers, industrial I/O modules, and industrial network switches. These products are utilized in various sectors, including agriculture, data center monitoring, and the oil and gas industry. The company is certified under GB/T 19001-2016 and ISO 9001:2015. It has also formed partnerships with various companies, including Huawei, General Mills, and Seeley International.
Toscano, founded in 1971 and headquartered in Spain, is a manufacturer and supplier of protection and control devices for the electricity, water, and environmental sectors. The company offers a range of products, including the Vigivolt, Vigilec, Tcontrol, and Tsensor series, along with a catalog of protection and control devices. These products cater primarily to the electrical and water industries, safeguarding equipment and ensuring efficient operations. Its devices are utilized in diverse applications, such as well monitoring, pressure control, swimming pool management, and drainage systems, addressing single-phase to three-phase needs with varying protection types and amperage ratings.
Misensor Tech Co., Ltd., a company established in 2010, based in Shanghai, China, is a manufacturer and supplier of position and movement sensor solutions using reed switches, hall effect and MR technology. The company provides various products such as reed sensors, level sensors, reed relays, automotive sensors, fuel level sensors, flow sensors, and mini reed sensors. These products are used for various applications such as power protection, backup, security, test and measurement, medical and industrial fields. Its many experience and the proficiency to development of customers' specific items according to customers' specific requirements and applications.
Micronics Ltd, founded in 1985, is a manufacturer and supplier based in Loudwater, Buckinghamshire, United Kingdom, specializing in flow measurement solutions. The company’s products include non-invasive clamp-on ultrasonic flow meters for direct installation into pipelines, as well as portable ultrasonic flow meters for temporary flow measurement needs or quick spot checks on pipelines; both types equipped with flow analysis software. Serving customers in over 50 countries, the company engages in various sectors, including building management and energy efficiency, chemical, and wastewater treatment.
Tecmark, headquartered in Mississauga, Ontario, Canada, is a manufacturer and distributor of electric components. Their product range includes switches, sensors, thermostats, spa side controls, and air transmitters, catering to industries like agriculture, appliances, HVAC, leisure, and marine. Tecmark's products serve a wide range of applications, from controlling the flow of electricity and fluids to measuring physical quantities such as temperature, pressure, and level. The company holds several certifications such as ISO 9001:2015, CSA, and UL certifications.
LJ Star Incorporated is a manufacturer and supplier of process analysis equipment established in 1991 and located in Twinsburg, Ohio, USA. The company offers sanitary fittings such as hygienic gaskets and anti-galling clamps for quickly sealing multiple ferrules, and bolt-on as well as weld-on sight glasses for monitoring process vessels. It also offers biogas sight glass and explosion-proof process observation cameras for centralized monitoring. The company’s products are commonly used in industrial manufacturing and processing facilities.
BERNSTEIN AG is a manufacturer and distributor of electromechanical components that was established in 1947 in Germany. The company manufactures switches and sensors that range from insulated and metal enclosed to foot switches and safety switchgear. They also provide enclosure technology that deals with the implementation of support systems for various applications such as using housing to accommodate electrical, electronic, or pneumatic components and load-bearing systems made of aluminum and stainless steel. They also offer safety solutions related to the operation of lifts and escalators that are placed in malls and airports
FineTek Co., Ltd, established in 1979 and headquartered in New Taipei City, is an ATEX & IECEX and TAF/ilac-MRA certified manufacturer and supplier of process automation and flow measurement solutions. The company's product portfolio includes Level Transmitters, Flow Measurement devices, Pressure instruments, and Temperature sensors. These products are utilized for monitoring and controlling process conditions, ensuring safety in industrial environments, and optimizing resource allocation. They are adopted by industries such as Water Treatment, Maritime, Steel, Power, and Construction. Additionally, the company offers services in wireless technology integration, pneumatic, and product solutions.
VEGA Controls Ltd. is based in Burgess Hill, West Sussex, UK, and serves as a manufacturer and distributor of sensors for industrial processing operations. It was established in 1984 as a subsidiary of Germany’s VEGA Grieshaber KG. The company primarily produces pressure sensors for measuring the force exerted by process materials, level sensors for measuring the height or volume of process materials, and point level sensors for detecting the presence or absence of process materials in a vessel beyond predesignated points. VEGA's products find common usage among clients in the food and beverage, water processing, and chemical processing industries.
EXSENCO, LLC., is based in Corpus Christi, Texas. EXSENCO is the American distributor for SANTET, Co. Ltd, which is a manufacturer of sensing and controls products based in Osaka, Japan. EXSENCO offers consultancy in the general area of control systems to provide clients with technology that adapts itself to changes in the workplace, rather than the workplace adapting to changes in technology. EXSENCO’s product segments include displacement & level measurement, servo valves, I-SAC servo controllers, and other products.
Locon Sensor Systems Inc., founded in 1986 with headquarters in Maumee, Ohio, USA, is a manufacturer and distributor of sensors and related accessories. The company's product line includes photoelectric sensors, inductive proximity sensors, connecting cables, fiber optic cables, and capacitive switches. These products are used in applications that include color detection, small part detection, mobile equipment, and printing machine vision. The company serves various markets, including automotive, construction, dental, medical, and commercial industries.
Toyoko Kagaku Co., Ltd. established in 1952, and based in Kawasaki-city, Japan, is a manufacturer and supplier of pressure gas supply and distribution systems. The company's product range includes gas supply systems, valve manifold boxes/panels (VMB/VMP), scrubber systems, purifiers, and gas detector systems. These products play a vital role in diverse sectors such as semiconductor, liquid crystal, photovoltaic, medical science, and communications. The company serves industries ranging from welding, food production to communications, semiconductor, and oceanography. Its services include the development, design, manufacturing, and sales of equipment for the semiconductor industry.
Alfa Laval, founded in 1883 and headquartered in Toronto, Canada, is a supplier of heat transfer, separation, and fluid handling products like boilers, separators, and heat exchangers. The company’s operations are based on three key technologies, which are heat transfer, separation, and fluid handling, and it helps farmers separate, process, and store milk products. The company has 42 production units, out of which 22 are based in Europe, and it sells its products in over 100 countries. It invests about 2.5% of its total yearly sales in research and development, resulting in around 25-30 new product launches per year.
Campbell Scientific Inc., established in 1974 and headquartered in Logan, Utah, is a designer and manufacturer of measurement, data acquisition systems, and data loggers. The company sells sensors, measurement devices, and OEM products for water, weather, and soil applications. It also provides software for several purposes, including communication between data loggers and supporting data logger programming. It is ISO 14001, ISO 9001, and ISO 27001 certified, and it marketed its first product, named the CA-9 Path-Averaging Laser Anemometer, in 1974. It introduced its first data acquisition system, the CR5 Digital Recorder, in 1975.
PMC-STS Inc., founded in 1963 and based in Danbury, Connecticut, is a manufacturer of pressure, vacuum, and level sensor instruments for aerospace, motorsports, and water applications, among others. The company also provides customized solutions and products to meet challenging customer requirements. It is the first manufacturer offering flush-mounted transmitters for measuring in-process pulp in wastewater, paper, and other difficult fluid level and pressure measurements. In 2022, the company was acquired by Sensor Technik Sirnach AG to help penetrate the North American market further and benefit from both application and product expertise.
Sitron, started in 1978 and headquartered in Sao Paulo, Brazil, is a manufacturer of industrial measurement and control solutions used in temperature, pressure, and vibration applications, among others. Its products include hydrostatic level transmitters, flow switches, and pressure transmitters. The company’s CN series of conductive level switches come with integrated internal electronic relays within the housing, eliminating the need for a separate remote controller. In addition, the company’s HFS high-frequency limit level sensor, made using an all-stainless-steel housing, detects the level of fluids or paste-like media while being immune to build-up on the electrodes.
The Group's Business Automation business is centered on offices and large buildings, and its Advanced Automation business, which provides solutions for factories and plants, serves customers around the globe. Additionally, in Japan, the Group's Life Automation business focuses on markets closely connected with people’s lives, such as lifelines and health.
Classic Automation based in Webster, New York is a parts distributor and repair servicer for installed controlled systems, drives, and servo motors, as well as a purchaser of well-maintained surplus systems. Parts that Classic Automation distributes and repairs include DcS, PPLC, and CNC control systems, panel controllers, HMI panels, display panels, drives, encoders, resolvers, and power supplies. Classic automation also offers hard drive repair services and support for customizing functionality in Panelicity controllers.
Endress+Hauser SE+Co. KG is a supplier of data and metrology instrumentation for industrial automation that was established in 1953 in Reinach, Basel-Country, Switzerland. The company offers systems and software for system integration and data acquisition, as well as measurement devices for process parameters such as liquid pressure and flow. It also offers Analytik Jena brand bioanalytical systems and instruments for laboratory applications, and consultation services for customers. The company serves a range of clients in the chemical, energy, and life sciences industries.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Time Mark Corp. |
4.6%
|
| 2 | Reventec |
3.8%
|
| 3 | FPI Sensors |
3.8%
|
| 4 | SMD Fluid Controls |
3.8%
|
| 5 | MOOG |
3.8%
|
| 6 | Shenzhen EPT Tech co., LTD |
3.1%
|
| 7 | Toyoko Chemical |
3.1%
|
| 8 | Watty Corporation |
3.1%
|
| 9 | CAE S.p.A. |
2.3%
|
| 10 | HOLYKELL TECHNOLOGY COMPANY LIMITED |
2.3%
|
Derivation Method
The ranking is calculated based on the click share within the liquid level sensor page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
31 | 47.0% |
|
Germany
|
9 | 13.6% |
|
China
|
9 | 13.6% |
|
United Kingdom
|
6 | 9.1% |
|
Japan
|
4 | 6.1% |
|
Denmark
|
1 | 1.5% |
|
France
|
1 | 1.5% |
|
Italy
|
1 | 1.5% |
|
Poland
|
1 | 1.5% |
|
Russia
|
1 | 1.5% |
|
Spain
|
1 | 1.5% |
Switzerland
|
1 | 1.5% |
9 products found
9 products
Endress+Hauser Group Services AG
220+ people viewing
Last viewed: 4 hours ago
MEMOSENS electrode -type conductive sensor that is ideal for life science, pharmaceutical and food industry's sanitar application ◾️ Application ...
Toyoko Chemical
350+ people viewing
Last viewed: 6 hours ago
Standard Response
4.0 Company Review
■ Make the solution can be determined by the difference in refractive index for each liquid It is possible to determine by setting two thresholds a...
2 models listed
Toyoko Chemical
400+ people viewing
Last viewed: 1 hour ago
Standard Response
4.0 Company Review
■ Make the solution can be determined by the difference in refractive index for each liquid It is possible to determine by setting two thresholds a...
2 models listed
Nissha FIS, Inc
40+ people viewing
Standard Response
■Features Acetone, ethanol, acetaldehyde, and isoprene can be separated and detected at ppb level without concentrating the sample.
Nissha FIS, Inc
50+ people viewing
Last viewed: 7 hours ago
Standard Response
■Features Acetaldehyde can be detected at ppb levels without sample concentration.
Endress+Hauser Group Services AG
190+ people viewing
Last viewed: 1 hour ago
Electromagnetic conductivity sensor for applications that require fast temperature response properties ◾️ Application Indiumax CLS52 Electromagne...
Endress+Hauser Group Services AG
230+ people viewing
Last viewed: 2 hours ago
Memosens 2.0 -mounted contact sensor ideal for life science and food industry's sanitar application ◾️ Application Memosens CLS82E This is the Sa...
