All Categories
This section provides an overview for angle meters as well as their applications and principles. Also, please take a look at the list of 46 angle meter manufacturers and their company rankings. Here are the top-ranked angle meter companies as of December, 2024: 1.Metrica, 2.ramé-hart instrument co., 3.KINO Scientific Instrument Inc..
Table of Contents
Categories Related to Angle Meters
Angle meters are devices used to measure the angle of inclination. There are two types: the pendulum type, which uses a pendulum to estimate position, and the float type, which measures the amount of change in the electrostatic capacity of a float inside a container filled with fluid and gas. Angle meters are not suitable for use in environments subject to frequent vibration, as many products do not support changes in acceleration. When mounted on automobiles or other vehicles that experience acceleration, a gyro sensor should be used to ensure levelness.
Angle meters are used in buildings, large facilities, and construction sites where work at heights is required. By measuring the level of the ground, they are used in determining the dimensions of building foundations and ensuring the level when installing the foundations of cranes and other vehicles that work at heights to prevent them from tipping over. When selecting an angle meter, it is necessary to consider the method of measuring inclination, accuracy, given time for measurement, operating environment such as temperature, and connectivity with other equipment.
The measurement principle of angle meters is explained separately for the pendulum type and the float type. Angle meters consist of components that measure the horizontal, as well as connection terminals for outputting the measured value, a display unit, and a control panel.
The pendulum type consists of a pendulum with a magnet attached, a magnetic sensor to detect changes in magnetic force, and oil to suppress minute vibrations. During measurement, the pendulum is swinging toward the center of the earth due to gravity, and the value of the magnetic force, which changes according to the distance between the center of the oscillation and the position of the magnetic sensor, measures the degree of inclination of the angle meter's installation site.
The float type consists of a circular container with gas and liquid sealed inside it in the same volume, with two plates that serve as electrodes. During measurement, the liquid surface is inclined according to the inclination angle, and the inclination causes the capacitance of the plates to change, and the inclination angle is measured by measuring the amount of change. Care should be taken when measuring at very high temperatures, as the liquid may vaporize and accurate measurements may not be possible.
*Including some distributors, etc.
Sort by Features
Sort by Area
Turck, Inc., established in 1965 and located in Mülheim, Germany, serves as a manufacturer of industrial automation solutions designed to enhance productivity and accuracy in the logistics field. The company's product portfolio includes sensors, power supplies, industrial controls, field logic controllers, and interface technology. Its products are utilized in the automotive, pharmaceutical, packaging, energy, and chemical industries. These products offer consistent automation, safety, and efficiency in oil and gas plants. Also, the company provides technical expertise and customized customer services.
The Fredericks Company, founded in 1935 and based in Pennsylvania, USA, is a manufacturer of tilt measurement and vacuum measurement products. The company's product portfolio includes electrolytic tilt sensors and vacuum sensors, electronic assemblies, gauges, inclinometers and controllers. Its tilt measurement products serve industries ranging from construction and RV levelling to aerospace applications. It also provides vacuum gauging and calibration services for industrial heating, national laboratories, cryogenics, industrial gas and LNG applications among others. The company is ISO 9001:2015 certified and registered with the U.S. State Department as ITAR compliant.
ifm efector (ifm) is a subsidiary of ifm electronic, founded in Germany in 1969. ifm has developed, manufactured and marketed sensors and controls technology to industries that include assembly and robotics, automotive, material handling, metal forming, mobile equipment, plastics, and food and beverage. Ifm produces sensors, condition monitoring equipment, image processing, safety technology, industrial communication, IO-link, systems for mobile machines, displays, software, connection technology, voltage supplies, as well as other accessories.
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
Pepperl+Fuchs, Inc. was founded in Mannheim, Germany in 1945 developing the forerunner of the proximity switch. Pepperl+Fuchs continues to develop proximity sensors as well as other industrial sensors including ultrasonic sensors, rotary encoders, positioning systems, display and signal processing, vibration monitoring, industrial communication, and signal processing as well as related accessories and software. Explosive protection products include safety barriers, surge protection, wireless solutions, HMI systems, power supplies, electrical explosion protection equipment, level measurement, and related software.
Ramé-hart instrument co., established in 1961 in Ledgewood, New Jersey, USA, is a manufacturer of contact angle goniometers, tensiometers, and custom liquid handling systems. These offerings provide precise surface tension and contact angle measurements, enabling advanced research in surface science, materials characterization, and quality control. The contact angle goniometers offer accurate wetting analysis and surface energy determination, while tensiometers provide comprehensive interfacial tension measurements. The custom liquid handling systems cater to specific laboratory needs. These products find applications in industries such as pharmaceuticals, electronics, coatings, and medical devices.
Resensys, LLC. is an American manufacturer and supplier of wireless sensor network technology products that was established in 2008 in College Park, Maryland. The company’s product portfolio includes its SENIMAX brand wireless gateway for collecting and transmitting sensor data, as well as its SENSPOT wireless sensors for measuring various physical parameters. It also offers its SENCLOUD brand web-based data visualization and analysis platform, along with its SENBRIDGE data integration software for third-party apps and systems. Aside from its products, the company provides installation, calibration, and personnel training services.
National Control Devices LLC, established in 1995 in Osceola, Missouri, is a manufacturer and designer of IoT-connected NCD devices and hardware for tech companies. The company makes IoT devices such as sensors, relay controllers, and accessories. It also provides services like customizing enclosures and boards and printing colors that help customers reduce wiring, power consumption and production costs. The company has partnered with PyComm, Particle, Losant, Blynk and Cayenne brands. Its authorized distributors include Relay Pros, Reboot Shop, Logic Bus, and Digi Key.
KINO Scientific Instrument Inc. is a manufacturer and supplier of contact angle meter, surface, interfacial tensiometer and Time of flight camera. The company is situated at Boston USA and came to inception in 2005. The company product portfolio includes ADSA-RealDrop based on the ADSA-P is the main algorithm developed by KINO which is used at the force surface tensiometer (STM), optical contact angle meter (CAM) and spinning drop interfacial tensiometer (SDT). The company develops the technology of contact angle meter, surface tensiometer and spinning drop interface tensiometer.
TSM Sensors s.r.l. is a manufacturer of industrial sensor solutions established in 2015 and based in Lombardy, Italy. It specializes in manufacturing inclinometers, cable extension transducers, magnetostrictive sensors, rotary encoders, and electronic control units. The company is part of FASSI Group and has acquired ISO 9001:2015 certification for its quality management system. Its manufactured products are in compliance with IPC requirements for soldered electrical and electronic assemblies. It caters to the agricultural, construction, marine, and electronic industries across several regions, such as Italy, France, Germany, and Spain.
MAE Advanced Geophysics Instruments, founded in 1982 and headquartered in Via G. Di Vittorio, Italy, is a manufacturer of precision electronic instrumentation for geophysical investigations. The company’s extensive product portfolio includes advanced tools like the ultrasonic pulse velocity through concrete system, VHR multichannel georesistivimeter with embedded channels (ranging from 48 to 96), an instrument for ultrasonic pulse velocity and sonic tests with an instrumented hammer, and the X820S seismograph complete set with 48 channels for MASW seismic analysis. These instruments find applications in several fields, including seismology and earthquake engineering, environmental and soil testing, and non-destructive testing of concrete structures.
S2Tech Srl, established in 2010 and based in Milan, Italy, is a manufacturer that specializes in measuring transducers and instruments tailored for industrial and scientific applications. The company offers a comprehensive product portfolio that includes a wide range of instruments, including displacement and level sensors, amplifiers, force and deformation measurement devices, inclinometers, accelerometers, and more. These products are utilized in various industries, including textiles, solar energy, automation, automotive manufacturing, and geophysical investigations.
Shenzhen Rion Technology Co., Ltd., founded in 2008 and based in Shenzhen City, China, is a manufacturer of INS/GPS integrated navigation system, MEMS inclinometer and 3D compass. The company has a design and developing team in software and hardware. It provides tech-equipment and aerospace equipment, new energy, IOT and energy saving technology that are core parts of automation, intelligence, informationization and digitalization. These products find application in UAV, intelligent robot, oil drilling, coal mining, marine surveys and others. The company has won the AAA credit enterprise and has been awarded the quality credible brand in China's sensor industry.
BDC Electronic, established in 1970 and situated in Grugliasco, Italy, is a manufacturer specializing in proximity sensors. The company provides an extensive array of industrial sensors, including ATEX sensors, inductive sensors, capacitive sensors, magnetic sensors, speed sensors, and acceleration sensors. Additionally, they offer supporting products like amplifiers and connectors. BDC Electronic adheres to quality standards certified under ISO 9001:2008, and their products undergo testing in accordance with the EN 60947-5-2 standards.
FSG, founded in Berlin, Germany, in 1946 is a manufacturer of measurement and sensor equipment and accessories. The company's product portfolio includes Inclination Sensors, Draw-Wire Encoders, Spring cable reels, joysticks and wind sensors. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
ZETLAB Company, founded in 1992, is a Russian-based manufacturer of control and measuring systems used in metallurgy & mechanical engineering, metrological laboratories, and manufacturing enterprises including aviation, automotive, consumer, and food industries. Its portfolio includes sensors, measuring products, turnkey systems, and digital sensors. The ZETSENSOR line digital devices include digital inclinometers, strain gauges, and seismic, temperature & pressure sensors. The company supplies turnkey data measurement, measurement control, and test control systems for seismic & leak detection, and seismic impact control. The company's ANALIZ, TENZO, SEISMO, VIBRO, and ZETVIEW software enable spectral analysis, electrical parameters measurements, & generation, recording, and representation of signals.
Vigor Technology Development Co., Ltd, established in 2001 and based in Shanghai, China, is a manufacturer and supplier of sensing, transmission, test, motion control, and intelligent control technologies used in light, electric, hydraulic, IOT, internet, and geotechnical applications. The company’s product portfolio includes inclinometer sensors, tiltmeters, levelmeters, accelerometers, and 3D laser scanners. Their inclinometer sensor product portfolio is segmented into MEMS, servo, and dynamic inclinometers, including shake sensors, motion displacement sensors, tilt sensors, wireless vibration velocity sensors, and tower motion sensors.
NIVUS, based in Germany, is a manufacturer and supplier of measurement technology and automation solutions. Established in 1967, the company provides products and solutions for flow measurement, level measurement, and water quality monitoring. Their products are designed to be accurate, enabling customers to manage and monitor their water and wastewater systems. Some of their product lineup includes Flow Meters, Level Sensors, Water Quality Monitoring, and Data Loggers and Controllers. Some of the industries they serve include Water and Wastewater, Environmental Monitoring, Industrial Processes, Hydropower, Mining, Agriculture, and Infrastructure.
Wuxi BEWIS Sensing Technology LLC is a Chinese manufacturer of precision monitoring equipment that was established in 2010 in Wuxi, Jiangsu. The company mainly produces sensors, directional tools, and measuring equipment which it markets under the brand name BWSensing. Its products include attitude and heading reference systems (AHRS), fiber optic integrated navigation systems for mapping operations, and fiber optic gyro inertial measurement units (IMU) for recording force or angulation. The company also offers product customization, OEM/ODM, and technical support services for its clients in the defense and industrial manufacturing sectors.
Fiama, established in 1913 and headquartered in Parma, Italy, is a manufacturer of the market mechanical, electrical, electro-mechanical measurement and control instrumentation. The company offers a range of products, including measurement, control instrumentation, and position indicators. It also provides handwheel indicators, rotary encoders, and more. Its product is suitable for reducing speed and increasing torque. Moreover, the company has achieved UNI EN ISO 9001 certification. Its products are mainly intended for manufacturing machinery for the food, packaging, wood, glass, and ceramic industries.
Tekbox Digital Solutions, founded in 2008 and located in Singapore, is a manufacturer of environmental monitoring products and test equipment. The company specifically fabricates multi-sensors remote terminal units, converters, sensor interfaces, antennas, and comb generators. It also produces coaxial adapter sets, self-powered active loads, high-pass filters, and anemometers. It applies electromagnetic compatibility pre compliance testing during the design phase that could reduce time to market and product development cost significantly. Its multi-sensors remote terminal units allow connecting up to 2 SDI-12 sensors, 2 analog sensors, and one pulse sensor.
Pulsotronic GmbH & Co. KG, headquartered in Niederdorf, Germany, is a manufacturer and supplier of sensors and sensor systems for the automotive, industrial, and medical sectors. Their ISO 9001:2015 certified products include distance sensors for measuring object distance in parking assist systems and robotics, speed sensors for applications like engine control and cruise control systems, pressure sensors for tire pressure monitoring and medical devices, temperature sensors for thermostats and climate control, and Hall sensors for proximity switches and automotive ignition systems.
The Kübler Group was founded in 1960, headquartered in Germany, and operating in 50 countries worldwide. The company is ISO 9001 certified and develops, produces, and distributes products & solutions for measurement, transmission, and evaluation purposes for heavy industry, bottling plants, alternative energy, and mobile automation. The company’s measurement products include data encoders, measurement systems, and inclinometers for measuring angles. Transmission products include slip rings, signal converters, and connectors. Evaluation products include process devices, displays and counters, and speed monitors.
Simex Sp.z.o.o, established in 1986, and based in Poland, Europe, is a manufacturer and supplier of industrial automation equipment. Their product portfolio includes indicators, controllers, counters, inclinometers, sensors, electric heaters, converters, temperature transmitters, and power supplies. The company has ISO-certified products. The company offers the latest developmental features with microprocessors, SMT technology, automation, process control, machine building, and user-friendly programming which is ideal for industrial process control. The products are used in industrial machinery applications.
ASM was established in 1979 in Moosinning, Germany where they are known as a manufacturer of sensors. The company designs different types of sensors mainly Displacement sensors, Inclination sensors, and Angle sensors that have applications in fields where displacement, position, length, and distance has to be measured, tested, or monitored. They are used in Injection Molding machines, Power Plant construction, Vehicle testing, Powerlifters, and Portal cranes. In the medical industry, they are used for precise positioning for Tomography, mammography, OP tables, and patient couches.
Angst+Pfister Sensors and Power AG, founded in 1987 and headquartered in Zurich, Switzerland, is a manufacturer of power supplies, and electronic components. It operates as a subsidiary of the Angst+Pfister Group, serving a global clientele. Its product range encompasses inertial sensors, power supplies, and current sensors, including AC/DC power supplies, DC/DC converters, DC/AC inverters, and LED AC/DC power supplies. These components find applications in overload protection, current metering, and battery charge monitoring. Depending on requirements, the company is also capable of delivering modified standard products or customised solutions, and offers differential probes for the development, maintenance, and repair of solar plants.
Apex is a manufacturer of scientific research equipment’s, supply and Services Company for various tests and measurements in the field of nano and thin-film, coating and characterization. The company was founded in the year 1991, in Kolkata, India. The company product portfolio includes the Langmuir-Blodgett Film Deposition system, a wide variety of Dip Coating and Spin Coating systems, an Ultra-Violet Curer system, and finally a brand new Contact Angle Meter system. By combining science and advanced technologies, Apex has been creating a wide range of products to support the researchers in the field of Nano-thin Film Research Applications.
Kyowa Interface Science Co., Ltd. is a manufacturer of scientific instruments for interfacial science, established in 1947 and based in Saitama, Japan. The company provides surface and measuring instruments, including a Contact Angle Meter, Surface Tensiometer, Peel Tester, and Friction Testers. These products received the "Analytical and Scientific Instrument Heritage" certification in the years 2012, 2013, and 2015. Kyowa's instruments are utilized for the analysis of interfacial phenomena in various applications, such as determining surface wettability, measuring surface tension, evaluating adhesion strength, and assessing frictional properties. They are used in research and development as well as quality control processes.
Holmarc Opto-Mechatronics Ltd. is an Indian manufacturer established in 1999, specializing in precision optical and mechatronics products. They design solutions for research, education, and industry, offering optical components, lasers, as well as precision positioning systems. Holmarc serves a global clientele in physics, chemistry, biology, engineering, and material science, empowering scientists and engineers with advanced technologies. Their solutions aid scientific research and educational advancements, remaining at the forefront of progress and excellence.
Biolin Scientific is a Swedish manufacturer of surface science instrumentation that was established in 2010 following Biolin AB’s acquisitions of KSV Instruments Ltd. and Q-Sense AB. Based in Gothenburg, the company produces analytical lab equipment such as tensiometers for measuring surface free energy and tension of solids or liquids, as well as quartz crystal microbalances with dissipation monitoring capabilities (QCM-Ds) for measuring the mass or viscoelasticity of thin films. These are used in the biotechnology, pharmaceutical, energy, and environmental protection sectors. Aside from its products, Biolin Scientific offers contract research, experimental design, and technical support services for customer projects.
Siko Products, Inc. established in 1963 and based in Buchenbach, Baden-Württemberg, Germany, is a manufacturer and supplier of sensors and positioning systems. The company's product range includes automation, measurement technology, sensors for mobile machines, sensors for construction vehicles, and positioning devices. These products are used for ensuring precise measurements and adjustments in various machinery and automation systems. Key industries that leverage the company's solutions are automation machinery manufacturing, construction machinery, mobile automation, and Industry 4.0 setups. It also provides services such as research and development, expert consultation, and customer support.
HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for providing the best technology and expertise in test and measurement. With branches in 30 countries, it provides clients with different solutions ranging from sound and vibration to propulsion efficiency and weighing. Examples of product offerings include transducers, amplifiers, sensors, strain gauges, data acquisition systems, etc. Such products are used in different markets, including aerospace, automobiles, telecom audio, and more. Besides supplying products, they also entertain their customers with after-sales services.
Balluff was founded in 1921 and is headquartered in Neuhausen, near Stuttgart, Germany. Balluff is a manufacturer of sensor and automation solutions for customers globally. Balluff serves many industries including life sciences, semiconductors, metalworking, fluid power, and mobile equipment. Balluff’s product line consists of sensors and connectivity components, accessories, complete systems, and software. Balluff offers services to assist customers across the range of finding solutions, deploying solutions, training, as well as support.
Baumer Electric AG was founded in 1952 and is headquartered in the city of Frauenfeld, Switzerland. The ISO 9001 and ISO 14001 certified company provides sensor solutions for digitalization, packaging, railway, food and beverage, and pharmaceutical industries. A sample of the company’s sensor product listings includes object detection, distance measurement, force sensors, accessories, and connectivity devices. The company offers product support for setup and installation, product functionality, and optimized product usage.
LabGeni is a manufacturer and supplier of laboratory equipment and consumables that was established in 2004 and is headquartered in Wuhan, China. LabGeni's main activity is the design, development, and manufacturing of laboratory equipment, including microplate readers, centrifuges, and incubators. The company also offers a wide range of laboratory consumables, such as pipette tips, microcentrifuge tubes, and cell culture media. Its products are used by a wide range of customers, including academic institutions, research laboratories, and pharmaceutical companies. LabGeni has over 200 employees and operates in more than 20 countries.
Xi'an Kacise Optronics Co., Ltd., also referred as China Good Quality Fluid Level Meter Supplier, is a manufacturer of precision measuring instruments in Xi'an City, China, since 2008. The company offers a range of products, including pH & ORP meters for chemical fertilizer water, dissolved oxygen sensors for shrimp farms, and COD measurement instruments for various applications. Its products are used in diverse industries to monitor fluid levels and water quality. The company holds ISO 9001:2008 and CE certifications in manufacturing, exporting products to over 30 countries and regions.
Metrica, founded in 1949 and headquartered in San Donato, Italy, is a manufacturer and distributor of professional measuring tools, offering a broad spectrum of traditional and instruments. Its product catalog encompasses Angled Gauges for measuring angles, Length Measures for measuring distances, advanced Laser Measuring Tools for precise measurements, Levels for establishing the horizontal plane, and robust Telefix Telescopic Poles used in height measurements for buildings, awnings, doors, and trees. These tools cater to the construction and mechanical industries, enhancing accuracy and efficiency.
AMETEK, Inc. is based in Berwyn, Pennsylvania, USA, and is a manufacturer of testing instruments and electrical utility products established in 1968 following the merger of American Machine and Metals and Pennsalt Chemicals. The company’s products include process analyzers for measuring properties of media in industrial processes, calibration instruments for its process analysis sensors or gauges, and power quality analyzers for diagnosing the reliability of electrical output. The company also provides asset management, calibration and repair, and custom engineering services for client-specific projects.
Novatest Srl., established in 2010 and based in Ancona, Italy, is a manufacturer and supplier of NDT instruments. The company also distributes tools for precise surveys, monitoring, and non-destructive testing. It adheres to the ISO 9001:2015 standards for the quality management system. In accordance with UNI/PdR 56:2019 and ISO 9712 standards, the company provides training sessions for the certification of individuals participating in non-destructive tests. It offers specific sensors for static and dynamic infrastructure monitoring and geotechnical monitoring. The company provides superior technical tools and devices to ensure geophysical research is as accurate as possible.
ATEK Electronics Sensor Technologies Inc was founded in 2002 and is a manufacturer and supplier of industrial sensors products and systems based in Gebze, Kocaeli, Turkey. The company offers various products, including optical linear encoders, draw wire potentiometers, and magnetostrictive linear position sensors. These products are used in various industries such as rail system, mobile vehicle, and energy. The company has passed the certification tests of ISO 9001, ISO 45001, and ISO 22301 standards.
OMRON Corporation is a Kyoto based electrical equipment manufacturing company founded by Kazuma Tateisi in 1933. OMRON’s product portfolio includes medical equipment like nebulizers and digital thermometers, automated teller machines for the finance industry to AC, DC and custom control systems for the oil and gas industries. The company has over 30,000 employees and offers its products and services in 120 countries. It primarily serves the healthcare, energy, casino, and automated test equipment industries.
UBITO is an enterprise within the FRABA group, specializing in the development and marketing of Wiegand technologies for commercial and industrial use. The company serves as a concept incubator and markets Wiegand sensor products, such as fluid meters and multiturn rotary encoders. FRABA has a history dating back to 1918 and has played a significant role in the development of sensor products like rotary encoders and inclinometers. With subsidiaries in Europe, North America, and Asia, FRABA has a global reach and works with sales and distribution partners worldwide.
Autosen, located in Essen, Germany, is a supplier of a large selection of sensors, automation technology, and Internet of Things solutions. The company provides position sensors, process sensors, motion control products, and control and signaling devices. It also offers mounting accessories, Internet of Things gateways, and sensor cables. The variants of its process sensors, inductive sensors, have noise immunity and can withstand extremely harsh environments. It has 250,000 devices in stock and over 20,000 customers are satisfied with its products.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | ramé-hart instrument co. |
8.6%
|
| 2 | KINO Scientific Instrument Inc. |
8.6%
|
| 3 | Kyowa Interface Science Co., Ltd. |
8.6%
|
| 4 | Metrica |
5.7%
|
| 5 | TSM Sensors s.r.l. |
5.7%
|
| 6 | Apex Instruments Co Pvt. Ltd. |
5.7%
|
| 7 | LabGeni |
5.7%
|
| 8 | Biolin Scientific |
5.7%
|
| 9 | Holmarc Opto-Mechatronics Ltd. |
5.7%
|
| 10 | S2Tech Srl |
2.9%
|
Derivation Method
The ranking is calculated based on the click share within the angle meter page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
9 | 23.1% |
|
Italy
|
6 | 15.4% |
|
Germany
|
6 | 15.4% |
|
China
|
4 | 10.3% |
|
Japan
|
4 | 10.3% |
|
India
|
2 | 5.1% |
|
Russia
|
1 | 2.6% |
|
Singapore
|
1 | 2.6% |
|
Poland
|
1 | 2.6% |
|
Switzerland
|
1 | 2.6% |
|
Sweden
|
1 | 2.6% |
|
United Kingdom
|
1 | 2.6% |
| Belarus | 1 | 2.6% |
Spain
|
1 | 2.6% |
Meiji Consultant Co., Ltd.
70+ people viewing
■Equipment overview Merex-CR is an inclination measurement device that utilizes a gravitational acceleration sensor (hereinafter referred to as inc...
Meiji Consultant Co., Ltd.
70+ people viewing
Last viewed: 15 hours ago
■Can measure underground displacement and groundwater level simultaneously ・High durability is achieved by attaching the MEMS acceleration sensor ...
Ubukata Manufacturing Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
It instantly detects unexpected situations that may occur at any time, and protects people from disasters and accidents. ◼︎POINT01 Reacts only to ...
JSK Co., Ltd.
60+ people viewing
Last viewed: 24 minutes ago
■Product information ・Biaxial tilt angle sensor (analog output specification) Direct waterproof coupler type tilt sensor ・Waterproof, small and l...
JSK Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
■Product information ・Biaxial tilt angle sensor (digital output specification) Direct waterproof coupler type tilt sensor ・Available with the req...
JSB Tech Pte. Ltd.
120+ people viewing
This product is available in two models with different resolutions and measurement ranges. DWL9000XY is a 2-axis ultra-precision inclinometer with...
2 models listed
Tokyo Measuring Instruments Laboratory Co., Ltd.
220+ people viewing
Last viewed: 1 day ago
■Summary Used to measure landslide displacement in the ground, displacement of structures, etc. It is connected in a multi-stage manner in a boreho...
Tokyo Measuring Instruments Laboratory Co., Ltd.
260+ people viewing
Last viewed: 1 day ago
■Summary This is an inclinometer that measures the displacement of the ground and structures. In advance, a dedicated guide pipe is installed verti...
2 models listed
Bika Japan Co., Ltd.
60+ people viewing
■Product description Tilt sensors detect the pointing angle of an object relative to the Earth's gravitational field. This sensor can be used for v...
Bika Japan Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
■Product description The measurement range of the tilt sensor is 0...360 degrees. Measurement ranges other than this are available upon request. Th...
Bika Japan Co., Ltd.
60+ people viewing
■Product description The rotation direction (X, Y, Z direction) of this tilt sensor can be selected from two directions. Detects the pointing angle...
Bika Japan Co., Ltd.
50+ people viewing
Last viewed: 21 hours ago
■Product description The N111C Model Tilt Sensor for Hazardous Locations has a flameproof enclosure design and is intended for use in offshore, off...
Bika Japan Co., Ltd.
40+ people viewing
■Product description The inclination sensor with explosion-proof enclosure for hazardous areas is designed especially for difficult tasks. This sen...
Soki Co., Ltd.
210+ people viewing
We are selling the DigiLevel 250 DGL-250, which is easy to see and makes numbers appear in dimly lit locations. Automatic reversal makes it easy to...
Tokyo Measuring Instruments Laboratory Co., Ltd.
230+ people viewing
Last viewed: 14 hours ago
■Summary This is a low capacity inclinometer. It is used as a deformation control instrument for nearby structures in urban civil engineering, etc....
2 models listed
Tokyo Measuring Instruments Laboratory Co., Ltd.
200+ people viewing
Last viewed: 1 day ago
■Summary This inclinometer is suitable for managing the construction of structures and measuring the behavior of structures over long periods of ti...
2 models listed
Tokyo Measuring Instruments Laboratory Co., Ltd.
420+ people viewing
Last viewed: 4 hours ago
This is a multi-stage inclinometer.
6 models listed
Hans Turck GmbH & Co.
520+ people viewing
Last viewed: 16 hours ago
The inclined sensor Q20L60 and the Q42 series are excellent sensors that measure the inclination angle of the installation location. A lineup of in...
4 models listed
STS Corporation
100+ people viewing
■Summary Improves the efficiency of land leveling work, trenching work, etc. ■Standard accessories ・Body ・Exclusive hard case ・SCN-60 dedicated...
STS Corporation
150+ people viewing
Last viewed: 12 hours ago
■Summary ・Waterproof model with LCD backlight ・Equipped with follow-up buzzer sound ・For controlling the angle of machines such as industrial ar...
STS Corporation
130+ people viewing
Last viewed: 1 day ago
■Summary ・Waterproof model with LCD backlight ・Equipped with buzzer sound ・For controlling the angle of machines such as industrial arms, etc. ...
STS Corporation
90+ people viewing
■Summary ・LED liquid crystal waterproof model ・Equipped with buzzer sound ・For controlling the angle of machines such as industrial arms, etc. ...
STS Corporation
90+ people viewing
Last viewed: 17 hours ago
■Summary ・Waterproof model with LCD backlight ・Reversing LCD display ■Standard accessories ・Body ・Dedicated storage case ・AAA batteries x 3 ...
STS Corporation
100+ people viewing
Last viewed: 11 hours ago
■Summary ・600mm laser-equipped digital inclinometer ・With backlight function ・Equipped with buzzer sound ・For aligning machines, etc. ・For ins...
STS Corporation
110+ people viewing
■Summary Easily manage gradients with color-coded bubble tubes ■Measurement surface has a wide groove The measuring surface has a wide groove, so ...
STS Corporation
170+ people viewing
■Summary Standard model of digital level ■Standard accessories ・Body ・AAA batteries x 2 ■Comparison display mode You can set any angle as the s...
Hans Turck GmbH & Co.
460+ people viewing
Last viewed: 10 hours ago
The inclined sensor Q20L60 and the Q42 series are excellent sensors that measure the inclination angle of the installation location. A lineup of in...
4 models listed
Aztec Co., Ltd.
70+ people viewing
Last viewed: 11 hours ago
Ushikata's surveying compass, which utilizes the magnetic field surrounding the earth, has been used all over the world for a long time. In the mou...
Aztec Co., Ltd.
70+ people viewing
Last viewed: 21 hours ago
Ushikata's surveying compass, which utilizes the magnetic field surrounding the earth, has been used all over the world for a long time. In the mou...
Shibukawa Kuwano Electric Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
Detects the tilt angle relative to the earth's center of gravity and converts it into an electrical signal This product is a torque balance type d...
