This section provides an overview for optical multimeters as well as their applications and principles. Also, please take a look at the list of 12 optical multimeter manufacturers and their company rankings. Here are the top-ranked optical multimeter companies as of October, 2024: 1.Fibramerica, 2.SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED, 3.Keysight Technologies.
Table of Contents
Optical multimeters are measuring instruments that use light.
They incorporate functions for measuring various optical characteristics. It is sometimes called an optical loss tester, optical loss tester, or optical loss test set.
The name “optical loss tester” is derived from the fact that it has an optical power meter to measure the intensity of light and a loss tester/return loss tester to measure how much of an optical fiber signal is lost. Some are also equipped with a laser as a light source and can be used as a stable light source.
Optical multimeters are measuring instruments that use light in electrical circuits and are mainly used to measure current and voltage. Suitable for high-frequency current and high-voltage measurements, they are not only widely used in many industrial fields, but are also used in medical and other fields because of their high-speed and highly reliable measurements.
Optical multimeters can be used to measure voltages, currents, resistances, capacitance, etc. inside circuits to check the operating conditions of circuits. Optical multimeters are also suitable for checking the operation of high-speed circuits because of their high-speed measurement capability.
Optical multimeters are also used for thermal imaging and non-contact temperature measurement, which detects infrared radiation emitted from surfaces to image temperature distribution. Examples include evaluating the thermal insulation performance of buildings and detecting overheating of electrical equipment.
Depending on the surface temperature of the object being measured, infrared or near-infrared radiation is emitted. By detecting this emitted light with an optical multimeter, the temperature of the object can be measured without direct contact.
It is used for the diagnosis and treatment of skin and eye diseases. In particular, ophthalmologists may use optical multimeters to diagnose and treat diseases such as glaucoma.
Another situation is the development of technology for functional brain imaging, which uses near-infrared light to non-invasively image brain activity. This is expected to find applications in the fields of neuroscience and clinical medicine.
Optical multimeters are measuring instruments that utilize light in electrical circuits. The principles of signals and light sources are as follows.
Optical multimeters transmit and receive light using optical fibers. The optical fiber is made of very thin glass fiber, which transmits light from the transmitter to the receiver.
The optical sensor at the receiving end receives the light and converts it into a signal, which is read as an electrical parameter of the circuit. In addition to enabling measurement with extremely high accuracy, this system is less susceptible to electrical noise in electrical circuits, enabling highly reliable measurements.
Light-emitting diodes or laser diodes are the main light sources used for optical multimeters. These light sources are suitable for optical multimeters because of their low power consumption and very high brightness.
The transmitted light enters the circuit to be measured and is reflected, refracted, or scattered inside the circuit. These lights are again returned to the receiving section via an optical fiber, converted into optical signals by an optical sensor such as a photodiode, and displayed as measured values.
Thus, the use of optical fiber enables non-contact, highly-accurate measurements. Optical fiber is also suitable for high-speed measurements because it has less signal delay than electrical signals.
Since measurement is non-contact, it is characterized by high safety and reliability and does not cause damage to the object being measured. On the other hand, since it measures the surface temperature of the measurement object, it cannot measure internal temperatures or the deterioration state of components.
Depending on the environment in which it is used, the accuracy of the measurement may be affected. Therefore, it is essential to understand the measurement target and conditions beforehand and to take measurements carefully.
*Including some distributors, etc.
Sort by Features
Sort by Area
Viavi Solutions, Inc. is based in Arizona, USA, and is a manufacturer of network testing and measurement products that was established in 2015 following the split of the JDS Uniphase Corporation into Viavi Solutions and Lumentum Holdings. The company produces wireless network optimization or testing tools, optical fiber inspection tools, and network performance troubleshooting software. It also offers cloud-native software platforms for automation, inventory, and quality assurance applications. The company’s products are used mainly by clients in the telecom, data center, and IT industries.
Keysight Technologies, Inc. was founded in 1939 and headquartered in Santa Rosa, California. Keysight is a global developer and manufacturer of electronic design and test solutions to communications, networking, aerospace, defense, and government, automotive, energy, semiconductor, electronic, and education industries. Keysight’s communications solutions group solutions include electronic design automation software; radio frequency and microwave test solutions, hardware and virtual network test platforms and software applications, as well as optical laser source solutions. Keysight’s electronic industrial solutions group offers various design tools and verification tools. Keysight offers product support, technical support, and training and consulting services. It sells its products through direct sales force, distributors, resellers, and manufacturer's representatives.
Yokogawa Test & Measurement Corporation was founded in Japan in 1954. Yokogawa currently serves a wide array of industries including the aerospace, automotive, consumer electronics, semiconductor and telecommunications industries with both hardware and software solutions. Among Yokogawa’s suite of products are oscilloscopes, voltage probes, power analyzers and meters, data acquisition tools, optical test equipment, a wide variety of handled meters, calibrators, and testers; analog instruments, and manometers.
FOCC Fiber Co. Limited, established in 2004 and headquartered in Shenzhen, China, is a manufacturer of fiber optical connectors and related assembly technology. The company's products include fiber cable assemblies, fiber optic pigtails, and fiber optic patch cords. It also provides standard fiber optic adapters, MPO adapters, and footprint fiber optic adapters. These products are used by data centers, ICT equipment manufacturers, and government departments. The company offers OEM and ODM services as well as custom production of components for approved clients.
Shenzhen Noyafa Electronic Co. Limited, established in 2006 and is situated in Shenzhen, China, is a manufacturer of cable testers. The company's product catalog includes wire tracker, LCD cable testers, CCTV monitor tester, underground wire locator and laser range finder. Its products are used by telecommunication, radio and TV operators. The company is ISO, CE, FCC and ROHS certified and has a number of technical patents like appearance and utility model.
EXFO is a Quebec, Canada-based developer and manufacturer of analytics solutions for network equipment manufacturers, communications service providers, and data centers. Originally founded in 1985, the company provides solutions for clients to more easily transition to 5G, fiber optic, and cloud-native networking. The company's specialized product lineup includes lab and manufacturing testing equipment such as bit error rate testers (BERTs), waveform generators, and optical modulation analyzers, as well as field network testing tools like fiber inspection probes and optical power meters (OPMs). These supply clients like Nokia, Facebook, and the U.S. Department of Defense.
UNI-TREND TECHNOLOGY CO., LTD. was established in 1988 and is a manufacturers of measuring and imaging devices based in Dongguan, Guangdong, China. The company produces various products such as digital multimeters, electrical power testers, DC electronic loads, handheld thermal cameras, and thermal imaging monoculars. The products are used in various applications such as industry electricity, environment monitoring, communication, photovoltaic power station, and ranging and mapping. The company has obtained ISO 9001 and ISO 14001 certifications.
Gao Tek Inc., started in 2001, and headquartered in Manhattan, New York, is a supplier of test and measurement equipment like embedded development tools, electronic measurement instruments, and telecommunication testers. The company is a B2B tech supplier that also stocks drone products, commercial gas detectors, and transceivers and is incorporated in the USA and Canada. It provides a one-year product warranty against defective material or workmanship and offers overnight delivery in the continental USA and Canada. It is a member of the GAO group and has served customers in over 50 countries worldwide.
Ranking as of October 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | Fibramerica |
25.0%
|
2 | SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED |
25.0%
|
3 | Keysight Technologies |
25.0%
|
4 | Viavi Solutions, Inc. |
25.0%
|
Derivation Method
The ranking is calculated based on the click share within the optical multimeter page as of October 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
China | 4 | 40.0% |
United States of America | 2 | 20.0% |
Canada | 2 | 20.0% |
Japan | 1 | 10.0% |
Taiwan | 1 | 10.0% |