16 Sampling Device Manufacturers in 2024
This section provides an overview for sampling devices as well as their applications and principles. Also, please take a look at the list of 16 sampling device manufacturers and their company rankings. Here are the top-ranked sampling device companies as of November, 2024: 1.Homogenising Systems Ltd, 2.PAC L.P., 3.TSUKASA INDUSTRY CO.,LTD.
Table of Contents
What Is a Sampling Device?
Sampling devices are devices used to extract raw materials such as liquids and gases, as well as manufactured products.
There are various types of sampling devices, including gas analyzers and liquid analyzers, as well as specialized sampling devices such as coal sampling devices. There are also devices such as bioreactors that automatically perform sampling that would normally require a lot of man-hours.
Uses of Sampling Devices
Sampling is used to investigate whether raw materials and products meet specifications and whether there are any biases in the manufacturing process. They are also used to investigate the composition of water in storage tanks for water purification facilities and culture tanks for bio-research, and in a wide range of other fields, including industry, medicine, and the food industry.
Coal sampling devices analyze components and water content to control quality. Based on the analysis information, we investigate whether the terms of the contract are violated. Other uses include the preparation of customs application documents for imports and the analysis of combustion efficiency. Proper sampling can be expected to reduce import costs and carbon dioxide emissions.
In the pharmaceutical and bio-related fields, some samples must be kept away from air and moisture or materials that are highly toxic. Automated sampling devices are used to ensure that reactions are not affected and that samples can be reliably prepared in these special environments.
Other Information on Sampling Devices
Advantages of Sampling Devices
When preparing a sample, it is important to create a sample that accurately represents the entire source from which it was taken to prevent biased results. When samples are extracted by hand, there is a risk of collecting samples from only a portion of the process or only those with good workmanship due to preconceived notions or assumptions. To extract a reliable sample, the process and conditions must all be the same, and the sampling procedure must be the same each time.
The use of the instrument allows for the setting of conditions and processes through programming. The same procedures and the same operations are performed each time, so highly reliable samples can be extracted.
List of 16 Sampling Device Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- France
- Germany
- India
- Japan
- United Kingdom
• Lab R&D samples from 1ml to 35ml / 275ml per minute.
• Production volumes from 15 lt/hr to over 1000 lt/hr.
• Industry-leading pressures up to 60,000 psi (4200 bar).
• Easy to use, clean and maintain. Reliable with low on-going costs.
• Multiple valve configurations for excellent process optimization.
-
-
-
Homogenising Systems Ltd
High Pressure Homogenizers
Company Overview
Our range of versatile High Pressure Homogenizers provide exceptional processing efficiency, with repeatable results, utilizing 40+ years of design experience. Applications - Cell Lysis, Particle Size Reduction, Nanoemulsions, Liposomes, LNPs, Vaccines etc .. Cell types include - Bacteria / E. coli, Yeasts, Algae. Materials - Graphene, Carbon Nanotubes, Nanocelluose and more. Our industry-leading technology provide high pressures up to 4200 bar / 60,000 psi with sophisticated temperature control. From Lab R&D samples to full production systems with volumes in excess of 2000 L/hr. Easy to use, maintain and clean + CIP and SIP. Systems can be offered with IQ/OQ, materials certification and 21 CFR part 11 compliance. Contact us for free testing and analysis of your samples.
-
-
-
-
-
PAC L.P.
Sampling Device
Manufacturer Overview
PAC L.P. was founded in 1931 in Houston, Texas, USA, as a manufacturer of advanced analytical instruments for gas chromatography, elemental analysis, physical properties, and fuel composition. The product list of the company consists of ElemeNtS, JFTOT IV, OptiDist, OptiFlash, and Reformulyzer M4. The products represent a cutting-edge solution for conducting atmospheric distillation and efficiently detecting total sulfur and total nitrogen across various states of matter, including solids, liquids, gases, and LPG samples, thereby enhancing both fuel analysis precision and laboratory efficiency. The company serves various industries, including chemicals, petroleum, analytical laboratories, environmental monitoring, and quality control.
-
-
-
-
-
TSUKASA INDUSTRY CO.,LTD
Sampling Equipment
Manufacturer Overview
TSUKASA INDUSTRY CO.,LTD, established in 1946, is an ISO 9001 certified manufacturer of powder equipment, and is based in Handa City, Aichi with subsidiaries in China and Thailand. The company offers various products, including Crushing Equipment, Mixers like the PowMixer Rotary Model Container Detachable System designed for mixing, transportating, and storing of high quality and fragile powders such as pharmaceuticals, functional foods, and crystals, Line Strainers, and the Magcap which can be installed at the inspection port of chute conveyance pipes to remove magnetic foreign materials.
-
-
-
-
-
Seishin Enterprise Co., Ltd.
RPS-02
Manufacturer Overview
Seishin Enterprise Co., Ltd. founded in 1968 in Chiyoda-ku, Tokyo, is a manufacturer and supplier of powder technology equipment. The company's product range includes plant apparatus, lab instruments, trouble-measure apparatus, functional materials, and powder custom processing and analysis. These products cater to industries requiring specialized powder technology solutions. They primarily serve sectors like manufacturing, research, and development, among others. Additionally, the company offers services such as custom powder processing, detailed analysis, equipment development, and technological consultation.
-
-
-
-
-
Mettler-Toledo
Automated Reactor Sampling System
Manufacturer Overview
Mettler Toledo was incorporated in 1945 in Toledo, Ohio, and is today headquartered in Greifensee, Switzerland. Mettler Toledo is a manufacturer of various analytical instruments for use in laboratories, industrial and manufacturing, and food retailing applications to customers globally. Mettler Toledo offers many products across product lines for uses such as product inspection, process analytics, jewelry scales, moisture analyzers, and software for laboratory weighing. Mettler Toledo also offers numerous accessories such as density kits, hands-free accessories, weighing tables, and weight accessories.
-
-
-
-
Manufacturer Overview
HORIBA RADIO LABORATORY was established in Japan in 1945 and has spent the last three-quarters of a century growing as an R&D company and engaged in international operations. HORIBA Scientific offers 200 years of experience developing high-performance scientific instruments and analytical solutions. The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing, and metrology to a broad range of scientific R&D and QC measurements. Operating in Asia, Europe, and North and South America, HORIBA scientific develops solutions that go beyond just products.
-
-
-
-
-
UC Marine Company Limited
Sampling Device
Manufacturer Overview
UC Marine Company Limited, in China, is a manufacturer of marine equipment. The company offers navigation and communication systems are engineered to enhance safety and efficiency on the water including GPS systems, radars, and VHF radios, safety equipment such as life jackets and lifeboats, and a wide array of marine electronics, from chart plotters to fishfinders, to support navigation and fishing endeavors. Its products are in accordance with SOLAS regulations and IMO standards.
-
-
-
-
-
ac-sperhi
Sampling Devices
Manufacturer Overview
AC-sperhi, established in 2009 and headquartered in France, is a manufacturer of air sampling and measuring equipment. The company designs and produces sampling devices for air quality control, asbestos and fiber diagnosis (MOCP and META samples), and microbiological applications such as clean room validation. Specifically tailored for asbestos and fiber sampling, it offers autonomous air sampling pumps, sampling filter cassettes, and accessories like fans for particle retention. The company also manufactures microbiological sampling devices for air and surface control, including applicators for Petri dishes and biocollectors for air quality measurement. It also provides rental, maintenance, and after-sales services for its equipment.
-
-
-
-
-
Sentry Equipment Corp.
Sampling Systems
Manufacturer Overview
Sentry Equipment Corp., established in 1925 and headquartered in Oconomowoc, Wisconsin, United States, is a sampling components and systems designer and manufacturer. The company's products include various easy-to-install sample coolers, heat exchangers, and ISOLOK samplers for high-viscosity applications, such as liquid and slurry. The company also offers process improvement consulting and a range of products that include coolant recycling, automation, and magnetic separators. The company provides services to production plants, including equipment maintenance, equipment rebuilds, and the supply of parts and consumable accessories.
-
-
-
-
-
Dietrich Engineering Consultants
Sampling Device
Manufacturer Overview
Dietrich Engineering Consultants, founded in 1987 and headquartered in Ecublens, Switzerland, is a manufacturer of powder handling and process containment systems. Through a number of acquisitions, the company now operates five distinct divisions, allowing the company to expand its products and solutions into particle sizing, filling solutions, and continuous processing technologies beyond its two primary specializations. It offers an extensive product range, which includes microdosing machines, downflow booths, and mobile clean rooms. The company's products are used in secondary pharma production, cosmetics, and explosive powder products.
-
-
-
-
-
KAWASO ELECTRIC INDUSTRIAL Co., Ltd.
Temperature Measurement and Sampling Probe
Company Overview
KAWASO ELECTRIC INDUSTRIAL Co., Ltd., established in 1957 and headquartered in Nishi-Ku, Osaka, Japan, is a manufacturer and exporter of measurement devices. The company’s diverse portfolio includes ‘Molten Metal Immersion Probe’ used for temperature & component measurement at blast furnaces & converters, Oxygen Measurement Probe used for quality control, Temperature Measurement & Sampling Probe used to collect information in steel-making process, Sublance Probe for an estimated measurement of carbon, and a calculator for chemical sensors among others. The company exports its products to markets in the US, UAE, South Africa, Vietnam, and Saudi Arabia.
-
-
-
-
-
-
-
-
-
-
-
Gold Standard Diagnostics
Sampling Devices
-
-
-
-
-
Wire Metal GMP Products
Sampling Device
-
-
Sampling Device Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Homogenising Systems Ltd |
40.7%
|
| 2 | PAC L.P. |
18.5%
|
| 3 | TSUKASA INDUSTRY CO.,LTD |
14.8%
|
| 4 | Changzhou Fengdi Plastic Technology Co., Ltd. |
3.7%
|
| 5 | ac-sperhi |
3.7%
|
| 6 | Gold Standard Diagnostics |
3.7%
|
| 7 | Mettler-Toledo |
3.7%
|
| 8 | Seishin Enterprise Co., Ltd. |
3.7%
|
| 9 | KAWASO ELECTRIC INDUSTRIAL Co., Ltd. |
3.7%
|
| 10 | HORIBA |
3.7%
|
Derivation Method
The ranking is calculated based on the click share within the sampling device page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Mettler-Toledo: 16,200
- HORIBA: 8,205
- TSUKASA INDUSTRY CO.,LTD: 150
Newly Established Company
- Falbin Engineering Pvt. Ltd.: 2014 (10 years ago)
- ac-sperhi: 2009 (15 years ago)
- Insignia international: 2000 (24 years ago)
Company with a History
- Mettler-Toledo: 1945 (79 years ago)
- HORIBA: 1945 (79 years ago)
- TSUKASA INDUSTRY CO.,LTD: 1946 (78 years ago)
Sampling Device Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Sampling Device Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
Japan
|
4 | 33.3% |
China
|
2 | 16.7% |
India
|
2 | 16.7% |
United Kingdom
|
1 | 8.3% |
United States of America
|
1 | 8.3% |
Germany
|
1 | 8.3% |
France
|
1 | 8.3% |
List of Sampling Device Products
8 products are listed.
Endress+Hauser Group Services AG
Water quality analysis meter Automatic water sampler LIQUISTATION CSF48 corresponding to water quality analysis parameters
30+ people viewing
Fully automatic sampling in purification, wastewater, industrial application ◾️ Application Sampling will be safe and easy. Liquism CSF48 Automat...
G -Science
Sampling bag method compatible collection set
40+ people viewing
This system is ideal for collecting sampling bags that correspond to the volatile organic compound (VOC) radiation measurement method (JASO M 902) ...
Endress+Hauser Group Services AG
Water quality analysis parameters A water quality analysis sample preparation system Liquiline System cat860
30+ people viewing
Rough on -site filtration system for sampling from the current of wastewater treatment facilities ◾️ Application The LIQUILINE SYSTEM CAT860 can ...
Anton Paar GmbH
Execute module -type sample processing devices execution of automatic dozing, blended, sub sampling / transfer
30+ people viewing
■ Not a robot - automatically supply ・ Vehicle: Up to 1,000 mpa.s.s.S ・ Input amount: several µl to 1 liter ・ The weight-controlled sample amoun...
Endress+Hauser Group Services AG
Water quality analysis parameters water quality analysis portable type automatic water sampler LIQUIPORT CSP44
30+ people viewing
Fully automatic sampling in purification, wastewater, industrial application ◾️ Application Samples can be collected anywhere by using Liquiport ...
Endress+Hauser Group Services AG
Water quality analysis parameter corresponding water quality analysis sample adjustment system LIQUILINE SYSTEM CAT810
30+ people viewing
Self -washing reverse filter for sampling from the pressure tube and the outlet ◾️ Application The Liquiline System Cat810 realizes continuous on...
Endress+Hauser Group Services AG
Water quality analysis sample preparation system for water quality analysis parameters LIQUILINE SYSTEM CAT820
30+ people viewing
Training system for sampling from wastewater treatment facilities and ground water ◾️ Application The Liquiline System Cat820 can provide beautif...
Technosuruga Lab Co., Ltd.
Easy to collect with a straw, hygienic oral flammable boring kit Metafloqueer (saliva)
40+ people viewing
■ Characteristics ・ It can be stored at room temperature (1 to 30 ° C) by preserving solution. ・ Confirmed viral inactivation by preserved soluti...
