53 Pressure Pump Manufacturers in 2024
This section provides an overview for pressure pumps as well as their applications and principles. Also, please take a look at the list of 53 pressure pump manufacturers and their company rankings. Here are the top-ranked pressure pump companies as of November, 2024: 1.Northern pump, 2.Varna Products, LLC., 3.Flight Works, Inc..
Table of Contents
What Is a Pressure Pump?
Pressure pumps are utilized to draw in liquids or gases and transfer them to the desired location. Due to their capacity to forcefully transfer liquids and gases, these pumps are employed when there is no difference in elevation, when pumping from low to high, or when high-speed transfer is required.
All pumps operate based on the pressure difference between the suction and discharge ports, and from this perspective, all pumps can be categorized as "pressure pumps." However, it is commonly used as a general term for pumps employed in toilet drainage, sewage systems, pile erection work, and tunneling sites.
Uses of Pressure Pumps
Pumps used for the following applications are generally referred to as pressure pumps:
- Household toilet drainage systems
- Transfer of water and sewage between water supply and drainage tanks in high-rise buildings
- Discharge of excavated soil containing toxic gases at excavation sites
- Pumping muddy water during pile erection work
- Driving filtration equipment at sewage treatment facilities
- Lifting sand during dredging work
- Special type fuel injection equipment
- Submersible throw-in pumps
- Material transfer systems in food processing plants
- Oil supply systems
- Water supply systems using wells
Principle of Pressure Pumps
The fundamental operating principle of pumps is generally consistent: liquids and gases are moved by alternately suctioning and discharging a pump using various mechanisms to create a pressure differential within the pump. From this perspective, all pumps can be categorized as pressure pumps.
Based on their structural characteristics, pumps can be categorized into two primary types: those that rotate a turbine inside the pump at high speed and those that alter the pressure within a compartment located inside the pump.
The first type is referred to as a non-volumetric pump and can pump a relatively large volume of liquid at low pressure. However, depending on the nature of the liquid, accurately setting flow velocity and other parameters may be challenging.
The second type of pump is known as a positive displacement pump, which can maintain high suction and discharge pressures and precisely set flow rates but does not handle large volumes of liquid.
Today, the term "pressure pump" is commonly used as a general term for pumps employed in various systems and work processes, rather than denoting a specific type of pump.
List of 53 Pressure Pump Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
- India
- Italy
-
-
-
Practical Instrument Electronics, Inc
Pressure Pumps
Manufacturer Overview
Practical Instrument Electronics, Inc., established in 1980 and headquartered in the United States, is a manufacturer of handheld process calibrators. The company specializes in handheld process calibrators for milliamp, thermocouple, and pressure applications. It offers calibrators from basic models to multifunction units with troubleshooting tools. Its calibrators feature an intuitive EZ-dial double-click menu for easy setup and operation, eliminating the complexity of traditional button-filled panels. The company’s product features include loop diagnostic technology (Loop Scope), RTD autodetect, and TC fault sense for efficient troubleshooting. It also provides recalibration, repair, and replacement services for its entire product line.
-
-
-
-
-
Northern pump
4900 Series Crude Oil Transfer Pump
Manufacturer Overview
Northern pump, established in 1929 and based in Grantsburg, WI, is a manufacturer of high Pressure heavy duty gear pumps. The company specialises in manufacturing and custom building heavy duty positive displacement gear pumps that can perform in high pressure and severe applications. These pumps are utilised in industries such as oil, gas, chemical, food & beverage. The company provides custom engineered gear pump for specific applications through their modular design. It also provides pump refurbishment, having a team of mechanics to recondition the pump back to its original condition.
-
-
-
-
-
General Pump Company
Pressure Pump
Manufacturer Overview
General Pump, founded in 1982 with headquarters in the USA, is a manufacturer of pumps, fluid power components, and accessories. The company offers an extensive line of pumping equipment that includes pressure cleaning pumps, vehicle cleaning pumps, and industrial-use pumps. It also offers numerous accessories that include chemical injectors, trigger guns, nozzles, and control valves. The company also custom manufactures power units, including stationary or portable electric, gas, diesel, or hydraulic drive-optioned power units with dual, stacked, or multiple configurations.
-
-
-
-
-
Tri-Rotor, Inc.
Pressure Pumps
Manufacturer Overview
Tri-Rotor is a manufacturer of positive displacement rotary piston pumps, established in 1930 in Somerville, Massachusetts. Acquiring Yale and Towne's patent rights, they began producing the innovative "shuttle block" design. In 1958, the company moved to Torrington, Connecticut. The company expanded globally in the 1960s, collaborating with Tominaga and Co. Ltd. in Japan. Their range of pumps consists of serial number records dating back to the 1930s, ensuring easy replacements. They serve diverse clientele, including blue-chip and Fortune 500 companies, with approximately 50% of sales from international customers.
-
-
-
-
-
Flight Works, Inc.
Pressure Pumps
Manufacturer Overview
Flight Works, Inc., founded in 2002, is a AS9100D / ISO 9001:2015 certified manufacturer of high precision miniature gear pumps in Irvine, CA, USA. Their pumps are designed to operate efficiently over a wide range of conditions, offering self-priming capabilities and excellent performance. From brushed motor pumps to magnetically driven models suitable for extreme environments, they cater to diverse client needs. With expertise in low-quantity prototyping and high-volume production, they offer customized solutions for aerospace, medical, chemical, energy, robotics, and other industries.
-
-
-
-
-
Varna Products, LLC.
Pressure Pumps
Manufacturer Overview
VARNA Products was founded in 2005 and is headquartered in Cameron Park, California. The company is a designer and manufacturer of fluid management systems that use Six Sigma methodologies of management, design, manufacturing, and packaging to maintain continuous improvement in the quality of deliverables. The company’s products include pumps, pre-lube oil pumps, circulating products, and controls. The company’s lubrication products are used in engines, sliding elements, gear trains, and other types of machinery used in the manufacturing and transportation industries.
-
-
-
-
-
Star Hydraulics & Pneumatics, LLC.
Pressure Pumps
Manufacturer Overview
Star Hydraulics & Pneumatics, LLC (SHP) is an American ISO 9001 certified manufacturer of standard and custom pumps, cylinders, and lift jacks that was originally established in 1947 as the Star Jack company. Based in River Grove, Illinois, the company produces air-powered, manual, and electric hydraulic pumps, cylinders, lift jacks, and accessories. Their products are utilized in various industries including in the transportation, military, food, and offshore sectors. SHP also provides custom product design, engineering and testing for clients with unique use cases, as well as repair and maintenance services.
-
-
-
-
-
Nitto Kohki U.S.A., Inc.
Pressure Pumps
Manufacturer Overview
Nitto Kohki USA is the US-based subsidiary of Japan-based Nitto Kohki. Nitto Kohki was established in 1956, originally as a manufacturer and marketer of air micrometers and other devices. Nitto Kohki develops products that save on energy and labor while being cleaner for the environment. 4 of Nitto Kohki’s product segments are tools, pumps, CUPLA, and delvo. Tools are used in wood working, aerospace, renewable energy, bridge building, and automotive. Pumps are used in hospital equipment, semiconductors, health and beauty equipment, and medical devices. CUPLA products are used in high purity chemicals, HVAC production, computer and server cooling, and plastic injection. Delvo products are used in door frames, PCBs, home appliances, and lighting.
-
-
-
-
-
The Kraissl Co., Inc.
Pressure Pumps
Manufacturer Overview
The Kraissl Company was founded in 1926 and is headquartered in Hackensack, New Jersey. The company is a manufacturer of strainers, filters, valves, and pumps for industry and business. All company products are manufactured in the U.S.A. to ensure workmanship quality. The company’s capabilities include working with a wide range of materials such as cast iron, bronze, aluminum, steel, and other special alloys. The company offers international delivery through authorized sales and service representatives.
-
-
-
-
-
Ashcroft, Inc.
Pressure Pumps
Manufacturer Overview
Ashcroft was founded in 1852 in Bridgeport, Connecticut to create instruments to protect steam-powered industry workers and today is a manufacturer in pressure and temperature measurement instrumentation.Ashcroft serves the chemical, food & beverage, metals & minerals, oil & gas, pharmaceutical & research, power, and water & wastewater markets. Ashcroft products include pressure instruments including pressure gauges, switches, sensors, and isolators; test instruments including calibrators, controllers, testers, and test gauges; and temperature instruments including thermometers, thermowells, RTDs, thermocouples, multipoint temperature sensors, and OEM temperature sensors.
-
-
-
-
-
Xylem Inc.
Pressure Pumps
Manufacturer Overview
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
-
-
-
-
-
AR North America, Inc.
Medium Pressure Diaphragm Pumps
Company Overview
AR North America Inc. (ARNA), a division of Annovi Reverberi, established in 1990 with headquarters in the USA, is a manufacturer and distributor of pressure washer pumps, equipment, and accessories. The company's products include high-pressure plunger pumps, portable electric pressure washers, hydraulic motors, nozzles, and brushes. These products are used for carpet cleaning, coolant blasting, tank cleaning, injecting systems, and other manufacturing processes, among many other applications. The company serves OEMs in the pharmaceutical, chemical, and transportation sectors, as well as the building cleaning industry.
-
-
-
-
-
Schaerges & Vossler Pump Co.
Pressure Pumps
Company Overview
Schaerges & Vossler Pump Co., established in 1972 and headquartered in Cincinnati, Ohio, USA, is a pump manufacturer. They offer a diverse range of products for various industries, including end suction centrifugal pumps, progressing cavity, vertical turbine pumps, air-operated diaphragm, as well as self-priming and transfer pumps, serving commercial, wastewater, and industrial sectors, fulfilling various fluid-moving requirements. The company holds ISO 9001:2015 certification and is a member of the Pump Manufacturers Association (PMA).
-
-
-
-
-
Peerless Materials Company
Pressure Pumps
Company Overview
Peerless Materials Company, was established in 1967 and headquartered in Vernon, California, is a manufacturer and distributor of wiping materials, absorbents, and spill response products. Their diverse product line includes wiping rags, non-woven wipers, paper towels, absorbents, as well as spill kits, booms, and sorbents. Catering to industries like manufacturing, construction, transportation, and environmental, these products serve crucial roles in wiping, absorbing, containing, and cleaning up various fluids and materials.
-
-
-
-
-
Brownlee-Morrow Company
Pressure Pumps
Company Overview
Brownlee-Morrow Company was founded in 152 and is headquartered in Birmingham, Alabama. Brownlee-Morrow is a full-line pump and fan distributor as well as service provider serving the municipal, industrial air, liquid handling, power generation, mining, automotive, chemical, pulp and paper, primary metals, marine, and poultry industries. Brownlee-Morrow services include repair and field service, system design, and well drilling. Brownlee-Morrow’s products include air handling & control, air pollution control, fans and blowers, pumps, pump accessories, seal products, macerators, softstarters, conveyors, sludge treatment, and filtration.
-
-
-
-
-
Distributor to Industry, Inc.
Pressure Pumps
Company Overview
Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.
-
-
-
-
-
Energy Machinery, Inc.
Pressure Pumps
Company Overview
Energy Machinery, Inc. was established in 1971 and headquartered in Rockland, Massachusetts. The company is a distributor and service provider of compressed air equipment for customers in general manufacturing, electronics, medical facilities, auto repair, and other industries. The company’s product line includes air compressors, blowers, breathing air purifiers from manufacturers such as Westinghouse, Gardner Denver, and Chicago Pneumatic. The company’s service lineup includes parts, repair work, rentals, used machinery, and planned maintenance programs.
-
-
-
-
-
Glauber Equipment Corp.
Pressure Pumps
Company Overview
Glauber Equipment Corporation (Glauber EC) was founded in 1960 and is based in Lancaster, New York. Glauber EC designs, manufacturers, and distributes pumping products and systems to markets such as biogas, power & utility, renewable natural gas, food & hygienic, industrial, and chemical markets. Glauber EC offers Renewable natural gas (RNG) systems for normal environments as well as hazardous areas and landfills. Glauber EC also offers compressed air, pumping, and environmental protection systems. Pumping systems include centrifugal pumps, positive displacement pumps, and blowers. Additionally, Glauber also offers industrial and small steam turbine packages.
-
-
-
-
-
MAXPRO Technologies, Inc.
Pressure Pumps
Company Overview
MAXPRO Technologies was founded in 195 and is founded in Fairview, Pennsylvania. MAXPRO is a distributor for pumping products including air driven liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings, and tubing. Other products include high-pressure fittings such as adapters, bulkheads, couplings, crosses, elbows, nipples, and tees. Rental equipment and complete systems such as air amplifier systems, liquid pumping systems, gas booster systems, oxygen gas booster packages, portable test carts, high pressure test systems and custom systems are also available.
-
-
-
-
-
Doering Company
Pressure Pumps
Company Overview
Doering Company was founded in 1969 and operates out of Clear Lake, Minnesota. Doering is a distributor for pump-related products for markets such as marine, mining, industrial, energy, aerospace, forestry, and agriculture. Doering’s product lines include cartridge valves, hydraulic hand pumps, manifolds, mobile and agricultural valves, and hydraulic valves. Cartridge valves include directional control, flow control, pressure control, and load holding. Hydraulic hand pumps include dual-stage hand pumps and single-stage hand pumps. Manifolds and accessories include custom designs based on customer needs. Mobile and agricultural valves include directional-control and lock valves.
-
-
-
-
-
Maxpro South, Inc.
Pressure Pumps
Distributor Overview
MaxPro South, Inc. was founded in 2000 and is based in Humble, Texas. MaxPro South is a stocking distributor of liquid pumps, gas boosters, air amplifiers, valves, fittings, and tubing. MaxPro South specializes in MAXIMATOR brand products. Rental equipment including coning and threading machines, hydrostatic testing equipment, and gas booster equipment is also available. MaxPro South uses factory-certified parts to repair and condition liquid pumps, gas boosters, air amplifiers, and valves. MaxPro South also offers on-site installation of custom systems including coning, threading, and bending of tubing. Service contracts are also available.
-
-
-
-
-
Supplyline
Pressure Pumps
Distributor Overview
Supplyline, Inc. is a distributor of pumps and accessories established in 1986 and based in Salinas, California. The company offers a wide range of pumps and pump parts including diaphragm and centrifugal pump models, motors, check valves, and couplers. They are the North American master distributor for AR North America and Hypro, but also carry products from brands such as Cat Pumps, Honda Power Equipment, Suttner, and SHURflo. Supplyline primarily serves clients in agricultural spraying, pressure washing, and the car wash industry.
-
-
-
-
-
ARCO Engineering, Inc.
Pressure Pumps
Distributor Overview
ARCO Engineering was founded in Louisville, Kentucky in 1954. ARCO Engineering, Inc. is a distributor of Pressure, Temperature and Liquid Level instruments, instrument valves, heat trace, comfort heaters, and safety relief valves. ARCO Engineering specializes in products for the natural gas, process, chemical, power, wastewater and OEM markets. ARCO Engineering offers many types of parts including calibration instruments, hand valves, thermocouples, digital meters, drive pressure gauges, respirators, jet pumps, and pressure relief valves.
-
-
-
-
-
Orr & Orr, Inc.
Pressure Pumps
Distributor Overview
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
-
-
-
-
-
Oil-Air Products, LLC.
Pressure Pumps
Distributor Overview
Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.
-
-
-
-
-
Dunham Rubber & Belting Corporation
Pressure Pumps
Distributor Overview
Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.
-
-
-
-
-
Comet Spa
Low pressure agricultural pumps
Manufacturer Overview
Comet Spa, founded in 1959 and headquartered in Reggio Emilia, Italy, is a manufacturer of pumps and cleaning equipment for the agricultural, industrial, and cleaning sectors. The company provides piston, diaphragm, and centrifugal pumps to spraying and weeding machine manufacturers. It also provides high-pressure pumps and pump units for the industrial sector, and cleaning products like washers and vacuum cleaners. The company has branches in more than 130 countries worldwide, with subsidiaries in France, the United States, and Mexico.
-
-
-
-
-
YesChamp
Pressure Pump
Manufacturer Overview
YesChamp, established in 1998, based in Zhejiang, China, is a manufacturer and supplier of quality pumps and engines. The company offers various products such as centrifugal pumps, industrial pumps, sewage pumps, solar pumps, and irrigation pumps, among others. They also provide various designs and a custom-built range of fire pump sets. The company has hundreds of cooperative factories and thousands of goods that can provide clients with multiple choices, comparable prices, good service and quality pumps and engines.
-
-
-
-
-
Vikas Pump
High Pressure Pump
Manufacturer Overview
Vikas Pump was founded in 1984 and is based on Sahanpur, Uttar Pradesh, India as a manufacturer and supplier of lines of chemical pump products. The company offers various line of products, including Centrifugal Pumps, Chemical Process Pump, End Suction Pump, Acid Pump, and Self-Priming Pump, commonly used in Domestic Sewage Treatment Plant, Residential Sewage Treatment Plant, and Packaged Sewage Treatment Plant. The company also offers customer services to provide products that cater to the customer's specifications and preferences.
-
-
-
-
-
Westmoor Ltd., Industrial Div.
Pressure Pumps
Manufacturer Overview
Westmoor Ltd., is based in New York State and was created in 1987 through the merger of Air Vac and Conde Milking Machine Company, originally founded in 1938. The company’s Industrial Division is a manufacturer of pumping systems for several industries including maple syrup and waste management. The company manufactures all equipment in the United States. The company’s Industrial Division has 4 segments: Conde Pumps, Conde Liquid Waste Systems, Conde Aeration Equipment that cleans lakes and ponds, and Concede Vacuum Systems for the Maple Syrup Industry.
-
-
-
-
-
Hema Endüstri A.Ş.
Pressure Pumps
Manufacturer Overview
Hema Driveline and Hydraulics, Inc. is the first overseas plant of Hema Endüstri in Turkey. It was established in Wood Dale Illinois in 2017. The company is an engineer and manufacturer of hydraulic parts and systems for automotive, construction, and material handling OEMs. The company’s three primary product lines are Front Axles, Hydraulic Lifts, and Hydraulic Gear Pumps. Other Hema Group Companies also serve automotive, agricultural, construction, and material handling markets with products such as passenger cars, and farm vehicles.
-
-
-
-
-
Haskel International
Pressure Pumps
Manufacturer Overview
Haskel began in 1954 and is now part of Ingersoll Rand. Haskel is a designer and manufacturer of high-pressure industrial gas and liquid handling equipment in three categories: hydrogen refueling, products, and aftermarket. Hydrogen refueling includes, refueling stations, hydrogen compressors, hydrogen compression and transfer, hydrogen valves fitting and tubing. Products include liquid pumps, refrigerant pumps, gas boost compressors, air pressure amplifiers, packaged systems, spare parts, system components, and high pressure valves. Aftermarket support includes support for hydrogen stations, repair, maintenance, service, and spare parts.
-
-
-
-
-
Sterling Process Equipment and Services, Inc.
Pressure Pumps
Manufacturer Overview
Sterling Process Equipment and Services, Inc. (SPES) is a stainless steel sanitary products manufacturer based in Columbus, Ohio. Founded in 1983, the company primarily serves clients in cosmetic and personal care, food and beverages, chemical engineering, pharmaceuticals, and biotech. The company’s specialized product portfolio features various sanitary tanks including storage units, silos, and pressure vessels, as well as valve clusters, CIP skids, and slot drains. From its state-of-the-art Columbus facility, SPES also offers custom concept-to-installation design and engineering packages for clients like Anheuser-Busch, Abbott Laboratories, and PepsiCo.
-
-
-
-
-
Zoeller Company
Pressure Pumps
Manufacturer Overview
Zoeller Company was founded in 1939 and currently is based in Louisville, Kentucky. The company is an independent manufacturer of pumps and related equipment through numerous divisions. Some of these divisions include Star Water Systems, Tulsar Custom Controls, Lincoln Industries, Flint & Walling, and Wolf Customized Pumps. Zoellar Family of Water Solutions has four product segments: Water Movement In, Water Movement Out, Water Treatment, and Controls. Each unit serves residential, municipal, industrial, and commercial systems and customers.
-
-
-
-
-
Parker / Autoclave Engineers
Pressure Pumps
-
-
-
-
-
Hydro-Pac, Inc.
Pressure Pumps
Manufacturer Overview
Hydro-Pac, Inc. was founded in the early 1980s and is headquartered in Fairview, Pennsylvania. The company is a designer and manufacturer of a complete line of high-pressure liquid pumps and gas compressors for use in residential, commercial, medical, and marine applications. The company’s four product lines cover gas compressors, high-pressure pumps, pressure vessels, and other specialized products. These other products include air bag inflators, pump systems for producing artificial diamonds, CO2 loop compressor systems, and high-pressure custom valve racks.
-
-
-
-
-
HNP Mikrosysteme GmbH
Low pressure pump series
Company Overview
HNP Mikrosysteme GmbH, established in 1998 and based in Schwerin, Mecklenburg-West Pomerania, Germany, is a manufacturer specializing in micro annular gear pumps for the mass production of liquid products. The company’s product lineup includes micro annular gear pumps for precise metering and dosing of liquids in the micro-milliliter range, dosing systems for dispensing precise amounts of liquid in containers, and customizable filters for application-specific uses. It also offers related accessories for its products, such as adaptors and connectors. The company is ISO 9001-certified, and mainly serves clients in the industrial manufacturing industry.
-
-
-
-
-
Hoch Druck Machinery
HIGH-PRESSURE-PUMPS
Company Overview
Hochdruck Machineries And Spares Inc., established in 2018 with headquarters in India, is a manufacturer and distributor of industrial-grade pumps, plunger pumps, and accessories made by KAMAT GmbH & Co. KG of Germany. The company's product line includes high-pressure pumps and plunger pumps up to machines that run on 1,200 kW and use five cylinders to create a flow of just under 4,000 liters per minute—used for hydraulics in steelworks as well as large systems in oil and gas processing. Its accessories include high-pressure water jets, guns, nozzles, and foot valves, as well as ship-hull crawler surface cleaners.
-
-
-
-
-
Taizhou Newland Machinery Co., Ltd
Water Pump
Company Overview
Taizhou Newland Machinery Co., Ltd., established in 2008 with headquarters in China, is a manufacturer and distributor of portable power generators and pumps and related spare parts. The company's product line includes portable pressure washers, diesel generators, gasoline generators, water pumps, and portable engines. These products are used by individual consumers as well as commercial and industrial-scale organizations. It offers warranties of 6–12 months on all of its products and also accepts orders from original equipment manufacturers.
-
-
-
-
-
Ningbo Dino-Power Machinery Co., Ltd.
Pressure Pumps
Company Overview
Ningbo Dino-Power Machinery Co. LTD (Dino-Power) is based in China with representative distributors available internationally. Dino-Power is both in-house and OEM producer for airless paint sprayer products. Dino-Power’s product line includes airless paint sprayers, other spraying equipment, and spare parts and accessories. Airless paint sprayers include piston and diaphragm pump designs, gas powered, airmix, and pneumatic sprayers, airless line marking machines and two component paint spray machines. Other equipment includes texture sprayers, stucco sprayers, hopper sprayers, and more.
-
-
-
-
-
Robert J. Fitzmyer Co., Inc.
Pressure Pumps
Company Overview
Robert J. Fitzmyer Co., Inc., since 1959, has been a distributor of pumps and industrial equipment. The company offers wide range of pumps including air diaphragm pumps, high-pressure pumps, submersible pumps, and water pumps, used in the industrial, oil and gas, sanitary, hydration, and wastewater sectors. The Conshohocken, Pennsylvania-based company provides pump repair, maintenance, machine work, custom fabrication, and pump alignment for manufacturers such as Crane Pumps, Gorman-Rupp, Dean pumps, and BJM pumps.
-
-
-
-
-
Hader Industries, Inc.
Pressure Pumps
Company Overview
Hader, Inc. is a custom manufacturer, and distributor of hydraulic tools and components, established in 1990 and headquartered in New Berlin, Wisconsin, United States. The company provides custom metal fabrications for metal components or structures, and has a product range which includes hydraulic torque wrenches, hydraulic cylinders, hydraulic valves, and a various types of other hydraulic tools and components. These products are utilized in various industrial applications to tighten and loosen bolts with high torque, create force and motion, and control the flow of hydraulic fluid in hydraulic systems.
-
-
-
-
-
Advanced Fluid Systems, Inc.
Pressure Pumps
Company Overview
Advanced Fluid Systems was founded in 1985 and is based in York, Pennsylvania. The company is a distributor of fluid systems and provides planning, designing, engineering, and manufacturing services for customers. The company serves power generation facilities, industrial and manufacturing, and marine and mobile markets. The company has 7 product lines, ranging from simple motion controls to integrated manifolds, all the way up to hydraulic systems and power units, and power generation solutions. The company’s field services include installation, preventative maintenance, and repair.
-
-
-
-
-
Coker Pump & Equipment Co.
Pressure Pumps
Company Overview
Coker Pump & Equipment Co. is a manufacturer of pump and equipment solutions. The company is situated at USA and was founded in 1955. The company main role is to supply and distribute pumps and related equipment to customers. The company offers a wide range of pumps for various applications which includes industrial, municipal, and commercial sectors. The company aim is to deliver excellent products and providing expert technical support to meet the needs of clients and plays a crucial role in ensuring that customers have access to dependable and efficient pumping solutions for specific requirements.
-
-
-
-
-
Dickow Pump Company, Inc.
Pressure Pumps
Company Overview
Dickow Pump Company, Inc. is the authorized distributor of Dickow Pumpen KG, a respected German pump manufacturer since 1910. Located in Marietta, Georgia, the company supplies sealless metallic centrifugal, multi-stage centrifugal, and side channel pumps with magnetic coupling. These pumps adhere to ANSI, DIN, and API 685 standards, serving industries such as petroleum, heavy-duty chemical, and gas. The company has earned a ISO 9001 certification for its standards. They offer a wide range of customizable options and materials for diverse applications.
-
-
-
-
-
Zhejiang Chenjie Pump Industry Co.,Ltd
Water Pump
Company Overview
Zhejiang Chenjie Pump Industry Co., Ltd established in 2010, a company that specializes in researching, developing, manufacturing, and industrializing pumping systems. Based in Bingang Industrial Area, Shamen, Yuhuan, Zhejiang, China. The company is driven to delivering cost-effective water pumps and water solutions to its customers. The organization wants to provide unparalleled products and services to its clients as part of its long-term target. The company offers personalized services to its clients and extends a warm invitation to visit their factory and provide feedback for further development.
-
-
-
-
-
-
-
Celiksan
Teos Series
-
-
-
-
-
Roth Pump Company
Pressure Pumps
-
-
-
-
-
Technology Co.,LTD
TL-C04 High Pressure Smart Toilet Booster Pump
Distributor Overview
Technology Co., LTD, established in 2005, Changsha City, China, is a supplier for high-end micro dc pump solutions. The company’s products portfolio includes micro DC brushless water pumps, DC diaphragm pumps and gear pumps. These products are mainly applied in new energy, home appliances, industrial cooling, medical, and automotive industry, among others. The company is known for its quality and good batch consistency, and cooperative relationship with many world famous brands such as Tesla, Flextronics, Kohler, GE, and Roca, among others.
-
-
-
-
-
DXP Cortech
Pressure Pumps
Distributor Overview
DXP Cortech was founded in 1987 and is based in Anaheim, California with offices across California and Nevada. DXP is a distributor of pumps and process equipment for food, pharmaceutical, industrial, mining, water P& wastewater treatment, energy, and wine industries. DXP provides services such as laser pump alignment, shop and field testing and calibration, on-site pump training, and design support and application engineering. A sample of DXP products include metering, screw pumps, submersible pumps, self-priming pumps, lobes, grinders, blowers and compressors, mechanical seals, and drums.
-
-
-
-
-
John Bouchard & Sons Co.
Pressure Pumps
Distributor Overview
John Bouchard & Sons Co. was founded in 1900 and is headquartered in Tennessee, with primary offices in Noxville and Nashville. The company operates in 4 segments: construction casting, service & repair, equipment sales, and construction & fabrication. The iron construction casting segment includes manhole frames, grates, catch basins, and valve boxes. The service & repair segment offers pump & rotating equipment repairs, air compressor services, CNC machining, and more. Equipment sales include pumping, air compressor, and industrial supply. Construction & fabrication includes fire protection, industrial fabrication, and electrical systems.
-
-
-
-
-
AB Industrial Equipment Co.
Pressure Pumps
Distributor Overview
AB Industrial Equipment Company (AB Industrial) is headquartered in West Chester, Pennsylvania. AB Industrial distributes and services pumps, seals, and related products. Pump categories include varieties such as centrifugal, vertical, slurry, mag-drive, sanitary, and positive displacement pumps. Seals offerings include component seals, cartridge seals, face materials, elastomers, as well as electric motors. Strainers and valves include basket strainers, auto-cleaning, non-metallic, plug valves, relief valves, and triple duty valves among other offering categories.
-
-
Pressure Pump Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Varna Products, LLC. |
3.4%
|
| 2 | Northern pump |
2.7%
|
| 3 | Westmoor Ltd., Industrial Div. |
2.7%
|
| 4 | Star Hydraulics & Pneumatics, LLC. |
2.7%
|
| 5 | Energy Machinery, Inc. |
2.7%
|
| 6 | The Kraissl Co., Inc. |
2.7%
|
| 7 | Zhejiang Chenjie Pump Industry Co.,Ltd |
2.1%
|
| 8 | Taizhou Newland Machinery Co., Ltd |
2.1%
|
| 9 | Technology Co.,LTD |
2.1%
|
| 10 | AR North America, Inc. |
2.1%
|
Derivation Method
The ranking is calculated based on the click share within the pressure pump page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
- Hoch Druck Machinery: 2018 (6 years ago)
- Zhejiang Chenjie Pump Industry Co.,Ltd: 2010 (14 years ago)
- Flight Works, Inc.: 2002 (22 years ago)
Company with a History
- Ashcroft, Inc.: 1852 (172 years ago)
- Orr & Orr, Inc.: 1934 (90 years ago)
- Zoeller Company: 1939 (85 years ago)
Pressure Pump Manufacturers in United States
*Including some distributors, etc.
- Practical Instrument Electronics, Inc
- Northern pump
- General Pump Company
- Tri-Rotor, Inc.
- Flight Works, Inc.
- Varna Products, LLC.
- Star Hydraulics & Pneumatics, LLC.
- Nitto Kohki U.S.A., Inc.
- The Kraissl Co., Inc.
- Ashcroft, Inc.
- Xylem Inc.
- AR North America, Inc.
- Schaerges & Vossler Pump Co.
- Peerless Materials Company
- Brownlee-Morrow Company
- Distributor to Industry, Inc.
- Energy Machinery, Inc.
- Glauber Equipment Corp.
- MAXPRO Technologies, Inc.
- Doering Company
- Maxpro South, Inc.
- Supplyline
- ARCO Engineering, Inc.
- Orr & Orr, Inc.
- Oil-Air Products, LLC.
- Dunham Rubber & Belting Corporation
Global Distribution of Pressure Pump Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
26 | 72.2% |
China
|
6 | 16.7% |
India
|
2 | 5.6% |
Italy
|
1 | 2.8% |
Germany
|
1 | 2.8% |
List of Pressure Pump Products
35 products are listed.
IWAKI CO., LTD.
Ideal for raising pumps Stainless steel high -pressure plunger pump RO series / MP series
40+ people viewing
■ Compact and low noise It is a compact and low noise stainless steel triple plunger pump. It is widely used as an increase in pressure pumps such ...
IBS Co., Ltd.
Diaflam pump liquid DC motor FD-5DCL
30+ people viewing
■ Features ・ Ideal for transportation applications for corrosive fluid (cleaning solution, printer tie, etc.). ・ Equipped with brushless motor, i...
IBS Co., Ltd.
Dia Fram Pump For Earth AC/DC motor liquid puluation reduction type FDL-10
40+ people viewing
■ Features ・ The DC motor is equipped with a brushless motor, and can be used as a standard function and can output alarm. ・ Pulse, vibration, no...
IBS Co., Ltd.
Diaflam pump liquid AC/DC motor pulsation decreased FDL-20
40+ people viewing
■ Features ・ Pulse, vibration, noise reduction. ・ Self -absorbent: 3m (about suction). ・ High corrosion -resistant material. ・ Different variab...
IBS Co., Ltd.
Metal Bellows Pump Pump AC motor (including explosion -proof type) High -pressure type
40+ people viewing
■ Features ・ It can be used for increased pressure of 275kpag or more and circulation applications that cannot be supported by standard type. ・ E...
IWAKI CO., LTD.
Clean aeration blower DF to large tanks and multiple water tanks
30+ people viewing
■ Powerful air ・ It is a diaphragm type blower that is ideal for oxygen replenishment such as large aquariums and multiple tanks. -The DF type is ...
IBS Co., Ltd.
Diapphram pump liquid AC motor FD-5L
40+ people viewing
■ Features Ideal for transportation applications for corrosive fluid (cleaning solution, printer tie, etc.).
IBS Co., Ltd.
DC motor FD-2DCL for diarf pump liquid
30+ people viewing
■ Features ・ Ideal for transportation applications for corrosive fluid (cleaning solution, printer tie, etc.). ・ Brushless motor is installed and...
IBS Co., Ltd.
Metal Bellows Pump Pump AC motor (including explosion -proof type)
40+ people viewing
■ Features Small, lightweight.
IBS Co., Ltd.
Metal Bellows Pump Pump For Early AC motor (including explosion -proof type) High -temperature type (MB)
30+ people viewing
■ Features ・ Can be used for high -temperature gas up to 230 ° C. ・ Explosion -proof is possible by optional.
IBS Co., Ltd.
Metal Bellows Pump for Pumps AC Motor Double Containment Type
30+ people viewing
■ Features ・ Explosion -proof is possible by optional. ・ Double bellows structure completely shut off the leak to the outside. ・ If the leak sen...
IWAKI CO., LTD.
Air drive diamond pump TC series (metal type) that is completely self -sucking and easy to handle
40+ people viewing
Last viewed: 10 hours ago
■ For transportation / pressure shipping of slurry and high viscosity It is a model suitable for slurry solution, highly viscosity, solvent, etc. T...
