166 Manual Valve Manufacturers in 2024
This section provides an overview for manual valves as well as their applications and principles. Also, please take a look at the list of 166 manual valve manufacturers and their company rankings. Here are the top-ranked manual valve companies as of November, 2024: 1.FW Murphy, 2.Schubert & Salzer, Inc., 3.Valtorc International.
Table of Contents
Categories Related to Manual Valves
1985-2014: Worked for Alstom Corporation, ABB Corporation, and Gadelius Corporation, designing Jungstrom air preheaters and mechanical design of diamond soot blowers. (ABB Corporation: https://new.abb.com/jp)
2014-2021: Worked as an engineering and project manager at Alvos Inc.
https://www.linkedin.com/in/yoichi-hiroki-92192394/
What Is a Manual Valve?
A manual valve (manual operated valve, hand-operated valve) is a valve that opens, closes, or adjusts its degree of opening by human operation (manual operation).
Manual valves are generally classified as globe valves, ball valves, gate valves, butterfly valves, or diaphragm valves, depending on their construction. Valves are used to shut off, "flow", or "stop" fluids by opening or closing a flow path, and to regulate the flow rate.
Uses of Manual Valves
Figure 1. Example of manual valve use
Manual valves are used to shut off fluid or regulate flow and pressure. When shutting off fluid, ball or gate valves are used. Typically, a ball valve is used because it is structurally stronger, leaves no valve plug (ball or disc) in the flow path, and can be opened and closed easily.
Neither of these valves can be used in the mid-open position. Care must be taken because cavitation will occur if the valve is used with the valve plug not fully opened at the halfway position.
Cavitation is a phenomenon in which a liquid becomes low pressure and vaporizes, generating bubbles. Cavitation causes increased vibration, noise, and flow pulsation, and may result in damage to piping and equipment.
Globe valves or butterfly valves are used to adjust flow and pressure. Globe valves are generally used because they are easy to adjust flow and pressure by operating the handle. However, globe valves have an intricate flow path inside the valve box (body), resulting in a large fluid pressure loss.
Principle of Manual Valves
A manual valve has a valve plug (ball, disk, etc.) inside the valve housing (body), and by turning the valve plug up and down, the plug adheres to the seat in the valve housing to shut off the flow path. Manual valves are manually operated to raise, lower, and rotate the valve plug.
The pressure drop across the valve as the fluid passes through the valve varies depending on the valve construction. Pressure drop is an important factor in valve selection. The pressure loss is calculated using the following Fanning's equation:
ΔP=4f (ρμ2L/2d)
ΔP: pressure loss (Pa), f: friction coefficient, ρ: density of fluid (kg/m3), μ: average velocity of fluid (m/sec), L: pipe length (m), d: inner diameter of inner pipe (m)
Types of Manual Valves
There are several types of manual valves, depending on their construction and function. When selecting a manual valve, it is important to consider the type of fluid used (water, steam, air, gas, chemical, etc.), the pressure and temperature of the fluid, whether it is corrosive or not, and the purpose of use (shut-off, flow, pressure control, etc.).
1. Globe Valve
Figure 2. Globe valve
Globe valves are also called globe valves. They are used as stop valves or throttle valves because of their superior ability to shut off fluids and regulate flow and pressure.
The valve box (body) is rounded and the internal flow path is curved. The valve plug (disk) inside the valve box moves up and down by rotating a handle attached to the valve stem.
This causes the valve plug to contact the seat, shutting off the fluid. The distance between the plug and the seat varies with the degree to which the handle is rotated, allowing for flow and pressure adjustment. Used as valves to adjust the volume of utilities such as steam, cooling water, hot water, compressed air, and vacuum lines that require flow and pressure adjustment.
2. Ball Valve
Figure 3. Ball valve
Ball valves are characterized by the spherical (ball-shaped) plug (disc) inside the valve housing (body). The valve plug is rotated by turning the handle attached to the valve stem 90 degrees to shut off the flow path. Ball valves have a small pressure drop because the valve plug does not remain in the flow path when the valve is open.
Basically, they are not used in mid-opening and are not used for flow or pressure adjustment. They are relatively compact and inexpensive, and are often used as small stop valves because they can be closed simply by turning the handle 90 degrees.
3. Gate Valve
Figure 4. Gate valve
Gate valves are valves used specifically to shut off fluids. The valve plug (disc) inside the valve box (body) moves up and down by rotating a handle attached to the valve stem (stem).
This causes the valve plug to contact the seat and shut off the fluid. The flow path in the valve housing is straight, resulting in a small pressure drop. Used as a stop valve because it is not used in the middle opening position, but in the open-and-closed positions.
4. Butterfly Valve
Figure 5. Butterfly valve
Butterfly valves are characterized by the disk-shaped valve plug (disk) inside the valve housing (body). The disc is rotated by turning a handle attached to the valve stem to shut off the flow path.
There are also semi-circular valves with a valve plug that rotates like the wings of a butterfly. Butterfly valves can adjust the flow rate and pressure by adjusting the angle of rotation of the valve plug.
5. Diaphragm Valve
Figure 6. Diaphragm valve
Diaphragm valves shut off the flow path with a diaphragm made of rubber or fluoroplastic. The valve plug (diaphragm) inside the valve box (body) is rotated by a handle attached to the valve stem (stem), causing the diaphragm to deform up and down. This causes the diaphragm to contact the seat and shut off the fluid.
Compared to other valves, the structure is simpler, and the flow path and driving portion are isolated by the diaphragm, making it excellent for highly corrosive fluids. For this reason, it is often used in fields such as medicine, food, and medical care. They cannot be used with high-pressure fluids and are mainly used at low pressures of 0.5 MPa or less.
How to Select a Manual Valve
Select a suitable valve considering the purpose, pressure drop, cost, and other factors. Manual valves do not require electrical wiring or pneumatic piping for the drive unit and can be operated at a lower cost.
Manual valves are contrasted with automatic valves, which are opened, closed, or adjusted by a drive unit (actuator), either remotely or by regulation. The drive (actuator) can be either pneumatically or electrically driven.
In the case of compressed air drive, there are two types: a single acting type in which only the opening action is pneumatically driven and the closing action is performed by a spring, etc., and a double acting type in which both the opening and closing actions are pneumatically driven. In the case of electric drive, screw jacks with electric motors or electromagnetic coils are used for opening and closing.
Other Information on Manual Valves
Manual Valve Symbols
When manual valves are used, they are often in very large installations or extensive areas. As a result, drawings and other information can be very complex.
Usually, the drawings do not show the complete shape of the manual valve, but rather the symbol for the manual valve.
List of 166 Manual Valve Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- Finland
- France
- Germany
- India
- Italy
- Japan
- Mexico
- Slovenia
- Switzerland
- Taiwan
- United Kingdom
-
-
-
Vaishnavi Metal Products Corporation Pvt.
Brass Bicycle Tube Valve
Manufacturer Overview
Vaishnavi Metal Products Corporation Pvt. Ltd (US) is a manufacturer of brass and copper industrial components that was established in 2018 in Anaheim, California. The company produces a wide range of brass and copper components including cable glands, fasteners, battery terminals, fittings, and EDM wires. It also offers contract manufacturing and OEM services for customers with unique project specifications. The company’s products are used by clients in various industries including consumer electronics, automotives, telecommunications, and power generation.
-
-
-
-
-
Bionomic Industries, Inc.
Vacuum Overflow Valves
Manufacturer Overview
Bionomic Industries Inc., founded in 1979 and headquartered in Mahwah, New Jersey, United States, is a manufacturer of clean air, product, and heat recovery equipment systems. As a specialist in conventional and advanced gas cleaning and recovery technologies, the company produces dry collectors, wet and dry scrubbers, and electrostatic precipitators, among many other specialized pieces of equipment. With over 1,000 successful installations worldwide, the company has proven experience in providing custom-designed, engineered, and installed solutions to handle a range of mediums, including gaseous contaminants, particulate, and odor-causing pollutants, or turn that pollutant into a valuable product.
-
-
-
-
-
ROSS Controls
Pendant Valves
Manufacturer Overview
ROSS Controls, established in 1921 in the United States, is a manufacturer and supplier of pneumatic valves and control systems for industrial automation and safety applications. The company’s product range includes a wide range of pneumatic valves, cylinders, and controls, serving industries such as manufacturing, automotive, energy, and more. ROSS Controls' devotion to safety and efficiency is reflected in their advanced control solutions that enhance machine performance and operator safety. With a rich history of creativity, the company continues to work towards the advancement of industrial automation and safety, ensuring convenient and responsive control systems for various industries.
-
-
-
-
-
Prince Manufacturing Corporation
Ball Valve
Manufacturer Overview
Prince Manufacturing Corporation, founded in 1941 and headquartered in North Sioux City, USA, is a manufacturer of hydraulic cylinders, valves and pumps. The company offers standard and custom hydraulic cylinders, standard hydraulic valves, hydraulic pumps and accessories like hydraulic hand pump and oil filters. It has also developed the Wolverine line of products to target a different segment of the market. It offers various resources like CAD models. parts manual, product configurator and videos for operating its products. The company's quality management system and manufacturing facilities are certified to ISO 9001:2015 by Orion Registrar, Inc.
-
-
-
-
-
FW Murphy
Valves
Manufacturer Overview
FW Murphy Production Controls, established in 1939, is based in Oklahoma, United States, as an engine management equipment manufacturer. It specializes in manufacturing electronic and mechanical controllers, compressor control panels, air-fuel ratio controls, scrubber controls, and valves. Its products cater to oil production and natural gas compression sectors across the USA and China. The company is a subsidiary of Genisys Controls, LLC, and has acquired ISO 9001 certification. It also partnered with Ariel Corporation to create the Ariel Smart Compressor system for compression monitoring and collaborated with 7 Compression to establish Titan-Flex, a technology for engines and compressors.
-
-
-
-
-
Kurt
Manual valve
Manufacturer Overview
Kurt WorkHolding is a manufacturer of vises and CNC workholding equipment for industrial manufacturing operations established in 1946 and located in Minneapolis, Minnesota, USA. The company’s product lineup includes its MaxLock brand 5-axis vise for precision clamping in standard machining processes, and its TriLock brand 3-in-1 vises with quick-change jaws for CNC machining operations. It also offers its Pyramid brand 45-degree mounting platforms for angular cutting or machining operations, and robotic grippers for automated processes. The company is ISO 9001:2015 and AS9100D-certified, and mainly serves clients in the industrial manufacturing sector.
-
-
-
-
-
OPW ENGINEERED SYSTEMS CORPORATE
LOADING VALVES
Manufacturer Overview
OPW Engineered Systems, A Dover Company, established in 1892 and headquartered in Ohio, US, is a manufacturer of quick and dry disconnect fittings designed to meet any fluid handling need. The company offers grade top and bottom loading arms, swivel joints, sight flow indicators, quick and dry disconnect couplers, and safety breakaways. It also designs and manufactures touch-free and friction car wash systems. Its products can reduce tank turbulence, vapors, and generation of static electricity. Moreover, the company has achieved ISO-9000 certification. It serves industries such as chemical, transportation, retail fueling, and vehicle wash.
-
-
-
-
-
Plast-O-Matic Valves, Inc.
Manual Valves
Manufacturer Overview
Plast-O-Matic was formed in 1967 in New Jersey, now situated in Cedar Grove, New Jersey. Plast-O-Matic serves aquarium, chemical dosing, chemical processing, metal finishing, semiconductor, wastewater treatment, water purification, and government application industries. Product offerings include product data sheets, CAD downloads, installation & maintenance instructions, ball valves, check valves, gauge guards, pressure regulators, process cooling sticks, anti-siphon valves, shut-off and diverter valves, sight glass & level indicators, solenoid valves, venting valves, other process controls & pumps, and custom valves.
-
-
-
-
-
Gemini Valve
Manual Valves
Manufacturer Overview
Gemini Valve is an American manufacturer of manual as well as automated ball valves and accessories that was established in 1974 as a brand of Parker & Harper Manufacturing. Based in Raymond, New Hampshire, the company primarily produces 2-way and 3-way series manual ball valves operated via gear operators or hand levers, as well as general industrial and compression end series automated ball valves. It also offers valve accessories such as mounting kits and solenoids, as well as custom ball valve design and engineering services. Gemini Valve products are used by clients in the petrochemical, rail, chemical, and water treatment industries.
-
-
-
-
-
Schubert & Salzer, Inc.
Manual Valves
Manufacturer Overview
Schubert & Salzer, Inc. was founded and incorporated in 1999 in Concord, NC, and the company supplier of manufacturing expertise for all commercial and technical needs, a fully equipped workshop plus delivery from the regional warehouse if required within a day. The portfolio of the company includes On/Off Valves, Globe Valves, Sliding Gate Valves, Ball-Sector Valves, Segmented Disc Valves, and more. Today there are five direct regional offices besides the American headquarters located across the United States with representatives and distributors servicing all 50 states and over a dozen countries.
-
-
-
-
-
Norgren Ltd
Manual Valves
Manufacturer Overview
IMI Precision Engineering, a company established in 1921, headquartered in Birmingham, United Kingdom, is a manufacturer and supplier of precision engineering products and solutions in the industry. The company offers a wide range of innovative products, including pneumatic and fluid control technologies, motion and fluid control systems, and process valves. Their solutions find applications across various industries, including automotive, aerospace, healthcare, and industrial manufacturing. The company also offers services such as technical support, custom engineering solutions and after-sales support to meet the customer’s needs.
-
-
-
-
-
Hamilton Company
Manual Valves
Manufacturer Overview
Hamilton Company is a US-based manufacturer of automation and laboratory equipment including process sensors, precision measuring devices, automated liquid handling workstations, and sample management systems. Hamilton's automation solutions include flexible automated liquid handling platforms and pre-configured Assay Ready workstations that are designed for specialized methods. They also offer small liquid handling devices for temperature control, plate sealing to protect microplate-based samples during critical stop points, and barcode reading. The company is also a supplier of laboratory products such as syringes and needles.
-
-
-
-
-
Viega USA
Manual Valves
Manufacturer Overview
Viega has a history of over 120 years and is based in Broomfield, Colorado. Viega is a developer and producer of hardware and industrial tools and pipe fitting technology. Viega’s equipment specializes in materials such as copper, stainless, polymer, lead bronze, and cupronickel. Some of Viega’s product listings include elbows, tees, adapters, flanges, caps, unions, couplings, reducers, branch connectors, tubing, manifolds, stub-outs, closet adapters, outlet boxes, press sleeves, closet risers, ballcock nuts, fasteners, sealing elements and gaskets.
-
-
-
-
-
Valtorc International
Manual Valves
Manufacturer Overview
Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.
-
-
-
-
-
The Kraissl Co., Inc.
Manual Valves
Manufacturer Overview
The Kraissl Company was founded in 1926 and is headquartered in Hackensack, New Jersey. The company is a manufacturer of strainers, filters, valves, and pumps for industry and business. All company products are manufactured in the U.S.A. to ensure workmanship quality. The company’s capabilities include working with a wide range of materials such as cast iron, bronze, aluminum, steel, and other special alloys. The company offers international delivery through authorized sales and service representatives.
-
-
-
-
-
Swagelok
Manual Valves
Manufacturer Overview
Swagelok Company was founded in 1947 in Cleveland, Ohio as a tube fitting manufacturer. The company serves numerous industries including the chemical, clean energy, food & beverage, industrial machinery, life sciences, and wastewater treatment industries. The copmany's product categories include hoses and flexible tubing, sample cylinders, welding systems, tubing and accessories, and measurement devices. The company's also offers engineering services including field engineering, onsite services, design and assembly services, training, and construction services.
-
-
-
-
-
SUPERLOK USA
Manual Valves
Manufacturer Overview
Superlok North America is a manufacturer of quality tube fittings, valves, and related products for various industries, including petrochemical, semiconductor, and biopharmaceutical. The company was established in 1998 and has since become a credible name in the industry, known for its products and excellent customer service. The company's product line includes a broad range of valves, fittings, and tubing products, such as ball valves, needle valves, check valves, tube fittings, and pipe fittings. In 2019, Superlok North America was awarded the prestigious "Supplier of the Year" award by a leading semiconductor manufacturer for its customer service and quality products.
-
-
-
-
-
SSP Fittings Corp.
Manual Valves
Manufacturer Overview
SSP Fittings Corp. was founded in Cleveland, Ohio in 1926 and is a vertically integrated supplier of fitting, valve, and tubing systems. SSP serves many industries including aerospace, chemicals, oil & gas, power, transportation, and pulp & paper. SSP product lines include fittings such as tube, pipe, and weld fittings; valves such as ball, bleed, needle, plug, and purge valves; tools, accessories, quick connects, filters such as inline and tee, hose, hose, hose fittings, power tools, accessories such as liquid leak detectors, and hand tools such as depth marking tools, tube benders, preswaging tools, gap inspection gauges, and reamer-deburring tools.
-
-
-
-
-
Seelye Acquisitions, Inc.
Manual Valves
Manufacturer Overview
Seelye, Inc. includes DJ Plastics and Tefen Products, USA. Seelye is a manufacturer of thermoplastic welders and welding-related equipment. Seelye has 3 product segments: hot air plastic welders, Tefen fittings and products, and DJ custom tank fabrication. Hot air plastic welders include plastic welders, thermoplastic welding rods, plastic welding tips, welder elements, welder replacement parts, optional equipment, and master appliance heat guns. Tefen fittings and products include tight push fittings, barb block fittings, general industrial accessories, and air blow guns. DJ Custom tank fabrication examples include plating tanks, dip tanks, and water holding tanks among others.
-
-
-
-
-
Papailias Inc.
Manual Valves
Manufacturer Overview
Papailas Inc was founded in 1976 and is a manufacturer of industrial process observation products and equipment, including sight glasses, lighting, sight flow indicators, liquid level gauges, sanitary flow indicators, glass products, and sight glass accessories. In addition, the company offers various services such as design engineering, prototyping, custom fabrication, and small/long-run production. Papailas also provides particle analyzer systems, intrinsically safe and explosion-proof illuminators, level control systems, and continuous/point level detection systems. These products are used for industrial process observation and control field applications.
-
-
-
-
-
Ogontz Corp.
Manual Valves
Manufacturer Overview
Ogontz Corporation was established in 1954 and headquartered in Willow Grove, Pennsylvania, the United States. The company serves the industrial, railroad, and solar markets as a concept designer, manufacturer, and consultant. For industrial markets, the company produces steam traps, freeze and scald protection, and numerous valves including control valves and sensing valves. For the railroad markets, the company provides track signaling equipment, meters, gauges, and HVAC equipment. For the solar market, the company provides freeze protection and hot water temperature control products.
-
-
-
-
-
NIBCO INC.
Manual Valves
Manufacturer Overview
NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.
-
-
-
-
-
Micromold Products, Inc.
Manual Valves
Manufacturer Overview
Micromold Products was established in 1954 and headquartered in Yonkers, New York. The company is a manufacturer of a broad line of corrosion-resistant plastic products, specifically Kynar, polypropylene, nylon, and Kel-F, for process industries. The company has developed proprietary manufacturing processes for PTFE and PFA machined parts and weldments. The company’s product line includes a complete line of dip pipes, sparges, valves, strainers, and piping systems. The company makes a full line of CNC machined parts for process industry OEMs including PTFE, PEEK, and UHMW polyethylene ball and butterfly valve seats, pump seals, and instrumentation components.
-
-
-
-
-
Metrex Valve Corp.
Manual Valves
Manufacturer Overview
Metrex Valve is an American manufacturer of regulators and valves that was established in Glendora, California in 1940. The company produces water regulating valves, pressure valves, seawater condensing valves, R410a valves for handling high-pressure refrigerants, and marine-grade valves certified to ABS, MIL-SPEC or USCG standards. These can be tailored to the specifications or use cases of individual customers. Metrex Valve products are mainly used by clients in the marine, nuclear, and HVAC industries, as well as in ventilation, air conditioning, and refrigeration systems throughout the commercial sector.
-
-
-
-
-
Merrick Industries, Inc.
Manual Valves
Manufacturer Overview
Merrick Industries Inc is an industrial equipment manufacturer and supplier based in Lynn Haven, Florida. Established in 1908, the company is the inventor of dynamic weighing and weigh feeding and currently operates in a 50,000-square-foot facility with about 500 employees as of 2023. The privately held company also owns a subsidiary in India that specializes in services for the power generation industry. Merrick’s product portfolio features different weighing and weighs feed solutions, including volumetric feeders, flow meter systems, weigh belt feeders, high-density lime systems, valves, and gravimetric feeders.
-
-
-
-
-
Marquest Scientific, Inc.
Manual Valves
Manufacturer Overview
Marquest Scientific was founded in 1967, and is based in Costa Mesa, CA, is a manufacturer and supplier of thermoplastic products that have applications in the fluid handling&control industry. The company provides Needle Valves, Gauge Guards, Laboratory Faucets&Turrets, Lab Base Fixtures, and, Spray Guns that are available in PVC, CPVC, Polypro, & PVDF forms. Their services include Precision injection molding, Injection presses ranging from 20 to 500 tons, Quick-turn CNC machining for rapid prototyping and production as well as 3D Printing Prototyping, Secondary Services, Part assembly&Packaging, and Long&Short-run production.
-
-
-
-
-
Maedler North America
Manual Valves
Manufacturer Overview
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
-
-
-
-
-
Lee Industries, Inc.
Manual Valves
Manufacturer Overview
Lee Industries, Inc. is a custom processing solutions manufacturer based in Philipsburg, Pennsylvania. Founded in 1927, the company's product lineup includes vacuum evaporators for concentration and crystallization, ribbon and paddle blenders for integrating dry powders or granular mixtures, and agitators for dispersion and homogenization of product formulations. The company also offers engineering and fabrication as well as lab and pilot plant testing of custom units. Lee Industries, Inc. serves various industries, with client corporations like Procter & Gamble, Zoetis, and the Campbell Soup Company.
-
-
-
-
-
Kitz Corp. of America
Manual Valves
Manufacturer Overview
Established in 1951, KITZ Corporation of America is a manufacturer that specializes in producing and supplying industrial valves and controls for various industries such as oil and gas, chemical, power generation, and water treatment based in Stafford, Texas. KITZ provides various types of valves such as ball, gate, globe, check, and butterfly valves along with control valves and actuators. Their products are designed to control the flow of liquids and gases. With branch offices and subsidiaries in the United States, Germany, Brazil, Japan, and many locations throughout Asia, Kitz is able to serve customers globally.
-
-
-
-
-
Kelly Pneumatics, Inc.
Manual Valves
Manufacturer Overview
Kelly Pneumatics was established in 2004 and is based out of Newport Beach, California. The company is a designer and manufacturer of proportional valves, pressure regulators, and pneumatic control products for numerous industries including medical, alternative energy, test equipment, semiconductor equipment, and gas analyzers. The company’s standard products include proportional valves, pressure regulators, flow controllers, flow sensors and meters, and electronic boards. The company provides custom solutions for pneumatic valves, regulators, and control products to match customers’ needs. These include analyzing, engineering, prototyping, and testing.
-
-
-
-
-
International Polymer Solutions, (iPolymer)
Manual Valves
Manufacturer Overview
International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.
-
-
-
-
-
Hydrasearch Company LLC
Manual Valves
Manufacturer Overview
Hydrasearch Company LLC is a designer and manufacturer of fluid control and transfer products for the maritime industry that was established in Stevensville, Maryland, in 1962. The company’s product lineup includes fluid control components for defense applications such as quick disconnect couplings, underwater hull penetrators, and submarine hose assemblies. It also offers recreational marine hardware such as raw water strainers, sounding tube deck fittings, and vent check valves. The company chiefly serves the defense and recreational boating industries, with additional clients in the American commercial sector.
-
-
-
-
-
Hydrasearch Commercial
Manual Valves
Manufacturer Overview
Hydrasearch Commercial is a manufacturer of commercial marine products, founded in 1962 and headquartered in Stevensville, Maryland. The company's specialization is in providing fluid conveyance products for sea refueling, underway replenishment hardware, critical hose systems, and aerospace assemblies within defense markets. Similarly, extending its coverage to the recreational and commercial sectors, the company crafts underwater and surface hardware, components, and venting solutions. Among their offerings are inverted tank vent valves, air pipe heads, seawater/suction strainers, deck drains, and sounding tubes.
-
-
-
-
-
HYDAC Technology Corporation
Manual Valves
Manufacturer Overview
HYDAC technology Corporation was founded in 1963 and has head offices globally. HYDAC is a manufacturer and designer of hydraulic, electronic, control, and fluid conditioning solutions optimized for mobile and industrial applications. HYDAC serves the agricultural, forestry, automotive, construction machinery, machine tools, material handling, mining, municipal, oil & gas, power generation, primary metals, pulp & paper, and wind energy markets. HYDAC’s product offerings include hydraulic and lube filters, accumulators, valves, cooling systems, electric sensors & controls, filter systems, and IoT diagnostics, process filters, fuel filtration, power units, cylinders, and related accessories.
-
-
-
-
-
Hayward Flow Control
Manual Valves
Manufacturer Overview
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
-
-
-
-
-
EVSCO, Inc.
Manual Valves
Manufacturer Overview
EVSCO, Inc. is an Illinois-based elliptic valve manufacturer founded in 1980. The company produces a variety of valves for manual, electric, and pneumatically-actuated systems that operate on gas or pressurized air for standard and customized flow patterns. Its valves are available in polypropylene or PVDF (polyvinylidene difluoride) thermoplastic and are shipped with standard Viton (fluoroelastomer material) seals. Further, EVSCO produces a stack valve that can be combined with other valves and utilized as a signal unit.
-
-
-
-
-
Entegris
Manual Valves
Manufacturer Overview
Entegris Inc., founded in 1966 and headquartered in Billerica, Massachusetts, is a supplier of advanced materials and process solutions for the life sciences, semiconductor, and other tech industries. Some of its products and solutions include specialty chemicals, gas delivery systems, and filters used by logic, memory, and semiconductor equipment manufacturers. Over 65% of its factories are ISO 14001 and ISO 45001 certified, while its stock is traded on NASDAQ under ENTG. The ISO 9001-certified company has 4,400 active patents and offers several services, including analytical, field support, and refurbishment services.
-
-
-
-
-
Discover Valve
Manual Valves
Manufacturer Overview
Discover Valve, established in Colorado Springs, Colorado in 2003, is a manufacturer of valves and water meters, used for water management across various industries. Their product portfolio includes water control valves, including gate valves, ball valves, butterfly valves, check valves, and pressure reducing valves, designed for precise water flow management. The company also manufactures hydrants and water distribution accessories, enabling water supply management for municipalities, irrigation and agriculture, and utility companies.
-
-
-
-
-
DFT Inc.
Manual Valves
Manufacturer Overview
DFT Inc., formerly known as Durabla Fluid Technology, is a manufacturer and provider of in-line check valves and severe service control valves founded in 1948. The company started by developing the Basic-Check valve for a customer needing a small metal-seated check valve with tight shut-off capabilities. With a rich history spanning over 70 years, DFT is Thomas Verified and a World Trade Center Member Company. They are ISO 9001:2015, 3-A, MSS, API 6D, CE, and PED Module H certified. It caters to the specific requirements of industries, including building maintenance, chemical processing, power generation, and more.
-
-
-
-
-
Coronet Parts Mfg. Co., Inc.
Manual Valves
Manufacturer Overview
Coronet Parts Manufacturing Company Inc. was founded in the early 1960s and headquartered in Brooklyn, New York. The company is a custom manufacturer of industrial hardware and fittings serving the automotive industry and plumbing industry among others. The company’s product lines include fittings, valves, assemblies, and other tools. Plumbing specialty items include tank levers, flood stoppers, and supply tubes. Assorted tools include tube cutters, bending tools, flaring tools, and related parts.
-
-
-
-
-
Conval
Manual Valves
Manufacturer Overview
Conval, established in 1967, and headquartered in Enfield, Connecticut, is a manufacturer that specializes in industrial valves. Their product range includes ball valves, gate valves, globe valves, and check valves which these products find applications in industries such as nuclear power, water treatment, agriculture, and hydraulic systems. Conval's valves are designed to handle high temperatures, pressures, and corrosive environments, ensuring safe and efficient flow control. The company holds certifications such as ISO 9001, demonstrating their adherence to quality and meeting industry standards. Their valves are crucial for process control and safety in various industrial applications.
-
-
-
-
-
Clippard
Manual Valves
Manufacturer Overview
Clippard Instrument Laboratory, Inc. was founded in 1941 in Arkansas and is now located in Cincinnati, Ohio. The company is a manufacturer of miniature pneumatic valves, specializing in ultra low leak, precision pressure control, and high-resolution flow control. Categories of Clipard Products include electronic valves, proportional valves, isolation valves, electronic controls, custom solutions, ppressure regulators, control valves, directional control valves, air pilot valves, air preparation equipment, and fittings hose, and tubings.
-
-
-
-
-
Century Instrument Co.
Manual Valves
Manufacturer Overview
Century Instrument Co is a diaphragm and valve manufacturer based in Livonia, Michigan. Established in 1950, Century Instrument began as a diaphragm manufacturer for pneumatic operators but has since expanded to manufacturing process control valves for the food & beverage, water treatment, pharmaceutical, petroleum chemicals, paper, and utilities industries. Century Instrument’s lineup includes ASA and ASTM-certified diaphragm components in automatic and manual builds and spare parts for different diaphragm models such as 630H, 630C, and 630HRT. Century has a long customer list and a reputation for supplying quality process control valves and instrumentation.
-
-
-
-
-
Cash Acme
Manual Valves
Manufacturer Overview
Cash Acme is based in Atlanta, Georgia and has a history of over 100 years and is part of the RWC family of brands also including SharkBite, HoldRite, John Guest, and EZ-FLO. Cash Acme is a manufacturer of water control valves for residential, commercial, and industrial plumbing applications. Cash Acme products include pressure regulating valve, temperature & pressure relief valves, thermostatic mixing valves (TMVs), back flow preventers, general plumbing & heating, as well as other applications.
-
-
-
-
-
Baelz North America
Manual Valves
Manufacturer Overview
Baelz North America is the Marrietta, Georgia-based official supplier of Baelz Automatic components and engineered systems for North America. Baelz Automatic was originally founded in Germany in 1896 and today serves as a manufacturer of energy-saving components and engineered systems for controlling process heating and cooling applications. These often serve the automotive, food, wine, marine, and chemical industries. Baelz North America is a manufacturer in addition to being a supplier of control valves. The company also manufactures and distributes actuators, controllers, ejectors, and other related parts while adding inspection and repair after market services.
-
-
-
-
-
Badger Meter, Inc.
Manual Valves
Manufacturer Overview
Badger Meter, Inc. was founded in 1905 and based in Milwaukee, Wisconsin. Badger Meter is a manufacturer and marketer of flow measurement, quality, control, and communication solutions in the United States and globally. Badger Meter serves several industries including water treatment, water distribution, aviation, concrete production. Badger Meter offers utility water solutions and commercial & industrial solutions product segments. Together they include products such as meters, software, diagnostics, and quality monitoring.
-
-
-
-
-
Assured Automation
Manual Valves
Manufacturer Overview
Assured Automation was founded in 1983 and is headquartered in Roselle, New Jersey. Assured Automation is an ISO 9001:2015 certified supplier of automation equipment serving manufacturing, chemical, and pharmaceutical industries among others. Assured Automation offers products in 2 major product lines: valves and flow meters. Valves include compact on/off valves, actuated 2-way and 3-way ball valves, actuated butterfly valves, actuated plug valves, actuated globe valves, manual gate valves, manual valves, lead free brass valves, thermal and remote shutoff valves, valve actuators, and valve & actuator accessories. Flow meters include water meters, fuel meters, industrial flow meters, lube-oil meters, and others.
-
-
-
-
-
ASC Engineered Solutions, LLC
Manual Valves
Manufacturer Overview
ASC Engineered Solutions is based in Waynesboro, Pennsylvania. ASC serves the mechanical & plumbing systems, commercial & residential, mining, food & beverage, industrial, fire protection, oil & gas, energy & power, and water & wastewater industries as a procure and repair servicer. ASC is ISO 9001:2015 certified. A sample of ASC’s offerings include fire protection & fabrication products such as fabrication equipment and seismic bracing, flow control such as commercial& residential valves, performance products such as engineered pipe supports & snubbers, pipe joint systems such s grooved and high pressure fittings, as well as press products and support systems.
-
-
-
-
-
Aqua Environment Co., Inc.
Manual Valves
Manufacturer Overview
Aqua Environment Co., Inc. established in San Rafael, CA in 1981 is a manufacturer of high-pressure valves and regulators for gas and fluid control. Their product portfolio includes Pressure Regulators, Gas Control Systems, fluid control accessories, and gate valves and check valves, used to handle a wide range of fluids and gases. The company serves industries such as Oil and Gas, Petrochemical and Refining, Chemical Processing, Aerospace and Aviation and Power Generation.
-
-
-
-
-
Anchor Fluid Power
Manual Valves
Manufacturer Overview
Anchor Fluid Power is a manufacturer of fluid power components for high pressure hydraulic systems such as flanges, quick couplings, and more, based in Cincinnati, Ohio and was established in 1982. The company offers a wide range of products including hydraulic valves, flanges, hydraulic ball valves, suction and return line test point adapters and hoses. They are an ISO-9001 and ISO-45001 registered company, and provide solutions for their customers’ hydraulic connection requirements.
-
-
-
-
-
Aero Space Controls Corp.
Manual Valves
Manufacturer Overview
Aero Space Controls Corporation was founded in 1965 and is based in Wichita, Kansas. Aero Space Controls is a producer of components often used in the aerospace and military sectors. Aero Space Controls has an extensive product catalog including categories such as actuators, valves, sensors, motors, and air conditioning-related components. Aero Space Controls also provides services including in-field and in-house repair and upper-level assembly. Upper-level assembly, combined with the upper-level design and development of actuators, pneumatic valves, air conditioning, and other components, provides turn-key read options for installation in aircraft.
-
-
-
-
-
International Polymer Solutions
Manual Valves
Company Overview
International Polymer Solutions, established in 2010 and headquartered in Irvine, California, is a manufacturer and supplier of high-purity fluid handling products. The company's product portfolio includes sub-miniature solenoid valves, pneumatic diaphragm valves, and compression tube fittings and connections. These products find applications in various industries, including the semiconductor industry, wastewater treatment, and chemical manufacturing. The company offers services, including custom solutions, installation, and maintenance, with distribution centers and service providers in various countries, including China, France, and South Korea.
-
-
-
-
-
TVI Valves
Manual Valves
Company Overview
TVI Valves was originally founded in 1986 and is currently headquartered in Emmaus, Pennsylvania. The company is a distributor of valves and accessories to numerous industries ranging from amusement parks to health care to photography to water purification. The company’s four primary product lines are Plastic Valves, Metal Valves, Instrumentation, and Valve Accessories. Examples of valves include ball, butterfly diaphragm, and plug valves. Valve accessories include actuators, stem extensions, gears, fasteners, and other devices.
-
-
-
-
-
Texas Industrial Remcor, Inc.
Manual Valves
Company Overview
Texas Industrial Remcor, Inc., started in 1972, is a manufacturer and distributor of control systems and sprayer valve solutions, from solenoid valves to motorized valves and valve accessories such as pressure regulators, adaptors, isolators, and mounting brackets. Headquartered in Little River Academy, Texas, the company offers services to agriculture, industrial, electronics, commercial, governmental, and recreational industries with an ISO 9001:2015 certification. The company provides the find-a-dealer service to help international customers access a dealer near them for parts of a current sprayer system or design and build a new system.
-
-
-
-
-
Stephens Mfg. Co., Inc.
Manual Valves
Company Overview
Stephens Manufacturing was started in 1957 in Tompkinsville, Kentucky. Stephens is a manufacturer and distributor of concrete-related equipment. Categories include ready mix plants, precast plants, central mix plants, RCC, environmental, and material handling. Ready mix batch plants that generally have quicker installation. Precast plants are custom built. Portable mixers mix RCC and other mixes. Environmental components include dust collectors, reclaimers, and wash down racks. Material handling includes batchers, bins, hoppers, silos, conveyors, and vertical pigs. Stephens offers assistance in customer problem solving and delivers to customers globally.
-
-
-
-
-
Steel & O'Brien Manufacturing
Manual Valves
Company Overview
Steel & O’Brien was founded in 1990 and operates out of Arcade, New York. Steel & O’Brien is a distributor of standard and custom-machined/fabricated fittings and assemblies. Steel & O’Brien serves the food, dairy, beverage, brewery, winery, distilling, biotechnology, pharmaceutical, cosmetic, personal care, extraction, semiconductor, and water treatment industries. Steel & O’Brien offers a range of products including various fittings, valves, actuators, diaphragm valves, pumps, accessories, sight glasses, strainers, filters, tubing, hangers, and others.
-
-
-
-
-
Seal Fast, Inc.
Manual Valves
Company Overview
Seal Fast, Inc. was founded in 1933 and is headquartered in Houston, Texas. Seal Fast is a distributor of sealing and fitting products. Seal Fast product categories include couplings, fire protection, gauges, pipe fittings and valves, hose and hose protection, and sheet rubber. Couplings include cam and groove, dry disconnect, shank, ring lock, foot valves, brass fittings, hydraulics, clamps, and banjo couplings. Fire protection equipment also includes gaskets, and industrial ground monitors. Gauges include siphons, oxygen, and thermowells. Pipe fittings and valves include combination nipples and flanges. Hose and hose protection include Fire hoses and industrial rubber. Sheet rubber includes skirt board and cloth insert neoprene.
-
-
-
-
-
SC Fastening Systems
Manual Valves
Company Overview
SC Fastening Systems hailing from Macedonia, OH is an industrial and construction supply distributer that provides value-added services. Product lines include fasteners, concrete anchors, abrasives, cutting tools, safety, janitorial, welding, paints and chemicals, material handling, tools and equipment, electrical, hydraulics and pneumatics, and lifting and rigging. Additionally, SC Fastening Systems offers specialty parts for niche industries such as laundry chute parts and custom hinges. SC Fastening Systems also offers services including inventory management and supply chain solutions, modified parts, kitting, assembly and special packaging, and fire protection products and services.
-
-
-
-
-
RED-WHITE VALVE CORP.
Manual Valves
Company Overview
RWV was founded in 1971 as a joint venture between Mitsui & Company, Ltd. and Toyo Valve Company, Ltd. of Japan as Red White Valve Corp. In 2003, the company joined Valvoindustria Ing. Rizzio of Italy and today is headquartered in Lake Forest, California. The company is an ISO 9001:2015 and 14001:2015 certified manufacturer of valves for various industries, sold through stocking and non-stocking distributors. The company’s valve products by category include lead-free, hydronic, standard, and commercial & industrial valves. The company’s products by type include balancing, ball, butterfly plumbing, and radiator valves.
-
-
-
-
-
Pro Dyne Corp.
Manual Valves
Company Overview
Pro Dyne Corporation (Pro Dyne) was established in 1985 as a manufacturers' representative agency covering the states of Pennsylvania, New Jersey, Delaware and Maryland. Pro Dyne is headquartered in Phoenixville, Pennsylvania. Pro Dyne is now a regional distribution company and handles fluid handling products both in the United States and abroad. Six primary product lines Pro Dyne represents are Scot Pump, Young Touchstone, Weg Motors, Delavan Nozzles, Rub Ball Valves, and Pro Dyne SS Pumps.
-
-
-
-
-
Metro Hydraulic
Manual Valves
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
MAXPRO Technologies, Inc.
Manual Valves
Company Overview
MAXPRO Technologies was founded in 195 and is founded in Fairview, Pennsylvania. MAXPRO is a distributor for pumping products including air driven liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings, and tubing. Other products include high-pressure fittings such as adapters, bulkheads, couplings, crosses, elbows, nipples, and tees. Rental equipment and complete systems such as air amplifier systems, liquid pumping systems, gas booster systems, oxygen gas booster packages, portable test carts, high pressure test systems and custom systems are also available.
-
-
-
-
-
Sterlco Sterling Authorized Dist. - M & M Control
Manual Valves
Company Overview
Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.
-
-
-
-
-
Kinequip, Inc.
Manual Valves
Company Overview
Kinequip, Inc. was founded in 1946 in Buffalo, NY as a distributor of industrial parts, accessories, and kits. Today these offerings have grown to include motors, compressors, blower systems, clams, pumps, various fittings, gauges, and sensors, as well as pneumatic and high-pressure devices. Kinequip also serves as a distributor for individual device and parts manufacturers. Kinequip additionally offers custom-designed solutions ranging from R&D to unique components and special-made parts, as well as value added designs on demand.
-
-
-
-
-
Jensen Inert Products
Manual Valves
Company Overview
Jensen Inert Products was founded in 1988 and is headquartered in Coral Springs, Florida. Jensen Inert Products is a manufacturer and distributor of non-contaminating, chemically resistant products made of fluoropolymers, silicone, and other inert materials used in the analysis, sample collection, distillation, processing, and product storage for industries including pharmaceutical, medical, electronics, and aerospace industries. A sample of Jensen Inert Products product lines includes gloves, bottles, cap liners, tubing, and syringes. Jensen Inert Products offers custom die cutting of gaskets, liners, and other components of thicknesses depending on the material.
-
-
-
-
-
Jaygo, Inc.
Manual Valves
Company Overview
Jaygo Incorporated was incorporated in 1971 in the State of New Jersey. Originally, Jaygo was a distributor of equipment for chemical, pharmaceutical, cosmetic, coating, and petroleum industries. Today, Jaygo is also a manufacturer of equipment including conical screw processors, double planetary mixers, and all types of grinding media. Jaygo serves both large Fortune 500 companies and startups. Jaygo sells both new and used equipment. Jaygo’s product offerings include agitated filtration & drying systems, double arm mixer extruders, batch mills, and pressure vessel clamps. Jagyo also offers equipment rental and testing facilities.
-
-
-
-
-
Industrial Specialties Mfg., Inc.
Manual Valves
Company Overview
Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.
-
-
-
-
-
East Bay Distributors Inc.
Manual Valves
Company Overview
East Bay Distributors, Inc. is a distributor for pneumatic applications, specializing in connectors, fittings, and industrial parts used across industries by both small companies and Fortune 500 corporations. The company’s distribution categories include SPC Fittings, SPC Products, Brass Fittings & Adapters, and Accessories. The company also features Dewalt protective products, including eyewear and work gloves. The company’s inventory management systems for customers offers benefits of lowering inventory costs, improving cash flow, and savings customers time and resources.
-
-
-
-
-
Doering Company
Manual Valves
Company Overview
Doering Company was founded in 1969 and operates out of Clear Lake, Minnesota. Doering is a distributor for pump-related products for markets such as marine, mining, industrial, energy, aerospace, forestry, and agriculture. Doering’s product lines include cartridge valves, hydraulic hand pumps, manifolds, mobile and agricultural valves, and hydraulic valves. Cartridge valves include directional control, flow control, pressure control, and load holding. Hydraulic hand pumps include dual-stage hand pumps and single-stage hand pumps. Manifolds and accessories include custom designs based on customer needs. Mobile and agricultural valves include directional-control and lock valves.
-
-
-
-
-
Distributor to Industry, Inc.
Manual Valves
Company Overview
Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.
-
-
-
-
-
Asahi/America, Inc.
Manual Valves
Company Overview
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
-
-
-
-
-
ARI Valve Corp.
Manual Valves
Company Overview
ARI Valve Corporation is based in Marietta, Georgia, and is the manufacturer of valves and related parts for fluid, liquid, gas, and vapor handling processes used in the global automobile, shipping, chemical, food processing, and heating industries. The company has a wide range of valves available including bellows seal valves, control valves, and strainers/check valves. Additional product lines include steam traps, actuators, and manifolds. Customers needing a specific valve not among the hundreds available are encouraged to contact the company for more information.
-
-
-
-
-
World Wide Metric, Inc.
Manual Valves
Distributor Overview
World Wide Metric was founded in 1970 and is based in Branchburg, New Jersey. World Wide Metric is a distributor of products for the global maritime & industrial flow control and fluid power markets. World Wide Metric products include valves in DIN, JIS, and ANSI standards, fittings such as hydraulic, JIC flared, ORFS, and BSP adapters, flanges, tubing, coupling, expansion joints, tube clamps, gaskets, marine firestop, RM pressfit & drain, and other industrial products.
-
-
-
-
-
Ryan Herco Flow Solutions (HQ)
Manual Valves
Distributor Overview
Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.
-
-
-
-
-
Orr & Orr, Inc.
Manual Valves
Distributor Overview
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
-
-
-
-
-
Oil-Air Products, LLC.
Manual Valves
Distributor Overview
Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.
-
-
-
-
-
Ohio Pipe, Valve & Fittings, Inc.
Manual Valves
Distributor Overview
Ohio Pipe, Valves, & Fittings, Inc. was founded in 1929 as Ohio Pipe Bending & Coiling Company. Also known as the Ohio Pipe companies, they specialize in fully welded, seamless, stainless steel, and PVC pipes of many sizes. Ohio Pipe companies also sell flanges, couplings, ball, butterfly, gate, control, and relief valves, with thousands of unique items in stock. Ohio Pipe companies’ past and current customers include power plants, steel mills, oil and gas companies, chemical plants, water and wastewater facilities, as well as many OEMs.
-
-
-
-
-
National Tank Outlet
Manual Valves
Distributor Overview
National Tank Outlet was established in 2005, and is located in Memphis, Tennessee, is a supplier of water and plastic tanks for the industrial, commercial, and agricultural markets. The company delivers vertical, horizontal, water, cone bottom, double wall, heat traced, and insulated tanks, which can be provided in HDPE or XLPE plastic. They also offer chemical tanks, storage tanks, intermediate bulk storage containers, and rain harvesting tanks along with utility tanks and double wall tanks that have applications in Agriculture, Building construction, Chemical production, and, Pharmaceutical industries.
-
-
-
-
-
Maxpro South, Inc.
Manual Valves
Distributor Overview
MaxPro South, Inc. was founded in 2000 and is based in Humble, Texas. MaxPro South is a stocking distributor of liquid pumps, gas boosters, air amplifiers, valves, fittings, and tubing. MaxPro South specializes in MAXIMATOR brand products. Rental equipment including coning and threading machines, hydrostatic testing equipment, and gas booster equipment is also available. MaxPro South uses factory-certified parts to repair and condition liquid pumps, gas boosters, air amplifiers, and valves. MaxPro South also offers on-site installation of custom systems including coning, threading, and bending of tubing. Service contracts are also available.
-
-
-
-
-
Marcuse & Son, Inc.
Manual Valves
Distributor Overview
Marcuse & Son was established in 1925 and operates out of Fort Worth, Texas. Marcuse & Son is a distributor of air compressors and air compressor parts and accessories. Air compressor offerings include reciprocating air compressors and rotary style air compressors. Marcuse & Son’s accessories include air receivers, alternators, belt guards, block heaters, brass valves and fittings, breather vents, compressor lubricants, exhaust mufflers, filters, regulators & lubes, refrigerated air dryers, and water separators.
-
-
-
-
-
Liquidyne Process Technologies, Inc.
Manual Valves
Distributor Overview
Founded in 1993, Liquidyne Process Technologies serves the dairy, brewery, distillery, biotech, pharmaceutical, & cannabis industries. Liquidyne offers a full line of sanitary and single-use products including process equipment components, sanitary equipment, single-use pumps and valves, single-use fittings and connectors, custom single-use assemblies, sanitary hose assemblies, sanitary valves, and single-use bioprocessing systems. Liquedyne produces all equipment in an ISO14644 Class 7-certified cleanroom has also attained 9001:2015, USP Class VI Testing, ASME Bioprocessing Equipment, and EHEDG certification status. Liquedyne also offers process optimization and on-site process audit & evaluation services.
-
-
-
-
-
E-Motion, Inc.
Manual Valves
Distributor Overview
E-Motion Inc. is a distributor for electric automation based in Eugene, Orgeon. The company is a distributor of many electric automation parts, with additional offerings in pneumatic, modular aluminum framing, and instrumentation products. The company’s two primary segments are electric actuators and pneumatic automation. The electric actuator segment includes rack and pinion linear actuators, rod type electric actuators, rodless actuators, actuator controls, and lift kits. The pneumatic automation segment includes standard air cylinders, rodless cylinders, guided cylinders, and rotary actuators.
-
-
-
-
-
Dunham Rubber & Belting Corporation
Manual Valves
Distributor Overview
Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.
-
-
-
-
-
Dawson-Macdonald Co., Inc.
Manual Valves
Distributor Overview
Dawson-Macdonald Co., Inc. was founded in 1928 and is headquartered in Wilmington, Massachusetts. Dawson-Macdonald is a developer and producer of production manufacturing equipment, systems, and supplies for surface preparation.Dawson-Macdonald’s product offerings include air filtration equipment, abrasives, air blast equipment, shot blast equipment, wet blast equipment, wheel blast equipment, and vacuum systems. Dawson-Macdonald also offers rental options as well as preventative maintenance, service, and repair both in house or in the field.
-
-
-
-
-
Compressed Air Systems, Inc.
Manual Valves
Distributor Overview
Compressed Air Systems was founded in Tampa, Florida in 1963. Compressed Air Systems supports customers in a wide array of industries including food & beverage, medical applications, industrial, electronics, fleet maintenance, aerospace, pharmaceuticals, plastics processing, CNC machine shops, and woodworking. Compressed Air Systems sells air compressors, railcar gate openers and various related products. Compressed Air Systems also offers services including audit, leak compressed air leak elimination, compressed air rentals, and turnkey packages for industrial equipment systems.
-
-
-
-
-
Circle Valve Technologies Inc.
Manual Valves
Distributor Overview
Circle Valve was founded in 1986 and headquartered in Harleysville, Pennsylvania. Circle Valve is a value-added distributor and manufacture rep of industrial valves, fittings, filters, and measurement control devices for a variety of industries and applications. Among Circle Valve’s product listings are check valves, relief valves, vacuum & high purity fittings, circle seal solenoid valves, Jefferson solenoid valves, Atkomatic solenoid valves GO regulators, cryogenic valves & equipment, hoke valves, Gyrolok Tube Fittings, Circle Seal Control Valves, and various measurement devices.
-
-
-
-
-
Strahman Group
Manual Valves
Distributor Overview
BI-TORQ Valve Automation was founded in 1981 and is now part of STRAHMAN Group. BI-TORQ is a distributor of plant optimization and safety products including valves and actuators used in oil & gas, food & beverage, manufacturing, pharmaceutical, and other industries. The company’s primary product lines include thermal shut-off valves, ball and butterfly valves, actuators, and knife gates. The company also sells accessories & repair kits including limit switches, NAMUR solenoids, and spring return handles.
-
-
-
-
-
INDUSTRA
Valves
Manufacturer Overview
Industra GmbH, established in 1995 and headquartered in Hessen, Germany, is a manufacturer of surface technology and paint systems. The company’s products include atomizer/application technology, dosing technology, and color-changing techniques. It also offers flange plates with hose packages, paint tubes and nozzles, and a manual paint pressure regulator. Its manufacturing capabilities encompass milling, assembly, and finishing processes using state-of-the-art CNC machines. The company provides assembly, system maintenance, and customer training, ensuring optimal performance and longevity of painting systems. Its services cover troubleshooting, spare parts supply, and repairs to meet diverse industrial needs.
-
-
-
-
Manufacturer Overview
Rigchina, established in 1993, and based in Zhejiang, China, is a manufacturer and supplier of laboratory and field instruments. The product portfolio includes a diverse range of hydraulic instrumentation, drill fluids instrumentation, cement test products, core analysis equipment, and mud pressure systems. All the products are ISO certified with a fully equipped machine shop, skilled workforce, and test labs for accuracy certification. The products are used in multiple industries which include oil, gas, mines, and medical sectors.
-
-
-
-
-
Bell S.r.l.
Hand valves
Manufacturer Overview
Bell S.r.l. is a manufacturer of hydraulic pumps, air-hydraulic boosters and electric power units that was established in Lombardy, Italy, in 1985. The company primarily produces air-hydraulic boosters for high-pressure or flow rate applications, and hydraulic pumps for manual, pneumatic, or electric applications up to 1,000 bar. It also offers filtering systems, electro-integrated cylinders for linear motion control, and custom engineering services. The company’s products are used mainly by clients in the marine and offshore industries, with additional applications in mining and industrial processing.
-
-
-
-
Manufacturer Overview
CKD Corporation, established in 1943 under the name of Japan Aircraft Electric Co., Ltd., is a Japanese manufacturer of automation machinery and manufacturing components, headquartered in Komaki, Aichi. Their diverse portfolio includes pneumatic and fluid control components, fine system components, drive components, and labor-saving components. The company has also developed various types of automation machinery, such as transparent object inspection systems, pharmaceutical products packaging machines, and more. These products find applications in various industries, for example their automated food packaging systems are designed for maintaining food quality and hygienic conditions. Their fluid control components are used in the solar cell manufacturing process.
-
-
-
-
-
KEIHIN CO., LTD
Manual Valves・Others
Manufacturer Overview
KEIHIN CO., LTD, founded in Japan, in 1953 is a manufacturer of industrial valves. The company's product portfolio includes ball valves, ate valves used for isolating and regulating the flow of liquids, gases, and slurry, Check Valves, Pressure Relief Valves, and diaphragm valves used for sterile and aseptic applications in the pharmaceutical and food industries.Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense.
-
-
-
-
-
THB Enterprise Co., Ltd.
Mechanical Valves
Manufacturer Overview
Hui Bao Enterprise Co., Ltd. (THB), founded in 1985 with headquarters in Hemei Township, Taiwan, is a manufacturer of air compressor components and pneumatic tools. The company's product line includes quick couplers, air hoses, air spray tools, and air hose reels. These products are used for various applications, including car wash equipment, vehicle servicing equipment, and measuring tire pressure. The company serves many OEMs across various markets, including automotive, firefighting, automotive services, and process manufacturing.
-
-
-
-
Manufacturer Overview
Produal, founded in 1987 in Kotka, Finland, is a manufacturer of building automation measurement and control devices. The company's product line includes transducers in which it measures and convert energy, building controllers manages system operations, wireless transmitters enables remote communication, passive sensors detect environmental input, and thermal actuators and control valves regulate fluid flow. These devices are instrumental in optimizing HVAC systems, enhancing energy efficiency, and ensuring building comfort.
-
-
-
-
-
Emec S.r.l.
MULTIFUNCTION VALVES
Manufacturer Overview
Emec S.r.l., established in 1982 and headquartered in Rieti, Italy, is a manufacturer of water treatment and chemical dosing systems. The company offers cutting-edge instruments, including motor-driven and solenoid-driven dosing pumps, controllers, and disinfection systems. Ermes, its online control system, enables remote monitoring and installation management. The company’s products are used in swimming pools, oil and chemical, and agriculture industries. Its Prisma and Prius dosing pumps and the Centurio controller emphasize precise and consistent performance in product designs.
-
-
-
-
-
Controlmatik ABW d.o.o.
chlorine rate valve
Manufacturer Overview
Controlmatik ABW d.o.o., founded in 1979 and based in Domžale, Slovenia, is a manufacturer of dosing and safety equipment for water treatment. The company also provides engineering solutions for disinfecting drinking, swimming, and industry water and stocks products like automatic chlorinators, chlorine dioxide analyzers, and emergency shutoff systems. It has more than 1500 clients in over 40 countries worldwide, and all of its products are tested and comply with DIN 19606 standard. The company also designs and manufactures customized water disinfection mobile units and dosing stations that can be used in remote areas without electricity or during natural disasters.
-
-
-
-
-
KOSMEK LTD.
Non-Leak Valve Unit
Manufacturer Overview
Kosmek Ltd. is a manufacturer of production and automation products and systems that was established in 1986 in Tokyo, Japan. The company’s products include quick mold change systems, work clamping systems, and robotic automation systems. These are primarily used by clients in the metal or plastic fabrication, automation, and mechanical engineering sectors. The company also offers product customization, installation, and consultation services for customers with unique project specifications. Some of its notable clients include Panasonic, Mitsubishi, and Honda.
-
-
-
-
-
Rubinetterie Bresciane Bonomi S.p.A.
VALVES
Manufacturer Overview
Rubinetterie Bresciane Bonomi S.p.A., founded in 1901 and based in Gussago, Italy, is a manufacturer of brass ball and butterfly valves. It has expanded its portfolio to include pressure reducers, heating components, and press fittings, and it also accepts OEM requests. It has five divisions, including marine and plumbing, and various ISO certifications like ISO 9001, ISO 14001, and ISO 45001. In 1967, the company was the first to create the patented two-ball valves, and in 2006, it added fittings to its portfolio. It is part of the Bononi Group, and it acquired Fra.Bo in 2019, and Chibro in 2023.
-
-
-
-
-
Lechler GmbH
Dead-man’s circuit and CleanerValve
Manufacturer Overview
Lechler, founded in Germany in 1879, is a manufacturer of nozzle and atomization technology. The company's product portfolio includes pneumatic atomizing nozzles, hollow cone nozzles, full cone nozzles, flat fan nozzles, and solid stream. Its products are used in a wide variety of industries and applications including food and beverage, pharmaceutical, chemical and process engineering, steel and aluminum, and cement. The company operates in countries including the USA, the Uka, Malaysia, and Europe.
-
-
-
-
-
Stampotecnica s.r.l.
Manual Valves
Manufacturer Overview
Stampotecnica s.r.l. is a manufacturer of pneumatic components that was established in Emilia-Romagna, Italy, in 1969. The company operates in two divisions: Stampotecnica, which specializes in plastic parts engineering, construction and injection molding services, and its manufacturing division known as Aircomp Automation. Its products include pneumatic cylinders, valves, and regulators for various industrial applications. It also offers plastic parts as well as assemblies for use in chemical processing, automotive manufacturing, and medical devices. The company provides design, simulation, and prototyping services for unique client projects.
-
-
-
-
-
Albert Fezer Maschinenfabrik GmbH
Manually controlled Valves
Manufacturer Overview
Albert Fezer Maschinenfabrik GmbH, founded in Germany in 1933, is a manufacturer of vacuum lifters. The company's product portfolio includes customizable attachments for lifting fragile or irregularly shaped items, standard vacuum lifters, and heavy-duty vacuum lifters for lifting substantial loads, ideal for industrial applications. It also provides maintenance and support services to ensure the continued performance and longevity of our equipment. The company has international and long-term trading partners in more than 40 countries.
-
-
-
-
-
PCI Instruments
NEEDLE VALVE & MANIFOLDS
Manufacturer Overview
PCI Instruments is a manufacturer of process instrumentation and diaphragm seals that is headquartered in Southport, England and was established in 2000. The company has a product catalog that includes pressure gauges, temperature gauges, diaphragm, seals, pressure transmitters, and resistance thermometers. Pharmaceutical, food processing, dairy, chemical, petrochemical, and nuclear industries are the main consumers of the products manufactured by the company. Its pressure gauges offer hygienic gauges for all stainless steel industrial applications along with he product catalog based on pressure, temperature, and level.
-
-
-
-
-
Gilac
VALVE, TAP
Manufacturer Overview
Gilac, founded in France in 1941, is a manufacturer of food-grade plastic containers. The company's product portfolio includes food crates, rolling dollies, barrels and containers, and dustbins. Its products are FDA-approved, BPA-free materials, ensuring that they are safe for direct contact with food. It offers over 700 products, all kept in stock, available with no minimum order quantities, and can also be customized, on request of food containers and crates.
-
-
-
-
-
ROSS EUROPA
valve
Manufacturer Overview
ROSS EUROPA GmbH, founded in 1960 and currently a subsidiary of ROSS CONTROLS, is a manufacturer headquartered in Langen, Germany, developing safety products and controls. The company’s portfolio includes directional and flow control valves, as well as manual and mechanical valves. It also offers a selection of electrical, hydraulic, and pneumatic safety products. The company further provides press safety double valves, pneumatic cylinders, and air preparation devices and tools. These products find applications in various industries, including automotive, metallurgical plants, and press metal forming.
-
-
-
-
-
HoKa Gesellschaft für Lüftungsformteile aus Kunststoffen mbH
damper valve
Manufacturer Overview
HoKa Gesellschaft für Lüftungsformteile aus Kunststoffen mbH is a German manufacturer of plastic ventilation pipes and moldings that was established in Hennef, North Rhine-Westphalia in 1985. The company’s product lineup includes damper and butterfly valves, flanges, control dampers, double sockets, and t-pieces. It also offers rain and deflector hoods, supply and exhaust air grilles, and PVC spiral hoses. Virtually all items in its product portfolio are manufactured using the blow molding plastic forming process. The company chiefly serves clients in the food and beverage, HVAC, construction, and automotive industries.
-
-
-
-
-
Sesto Valves Srl
Ball Valves
Manufacturer Overview
Sesto Valves Srl, based in Agrate Brianza, Italy, is a manufacturer of custom designed ball valve solutions for the chemical, petrochemical and energy industries. The company has a product range for premium and midrange ball valves for applications in cryogenics, extreme high temperatures, metal seated applications, as well as specialty double block and bleed emergency shutdown valve solutions. These valve products can be supplied as simple manual shutoff valves or with customized automation and control solutions for applications with unique requirements. The company has obtained conformity certifications for CE and ISO 5211 standard, and also has a CRN certificate and ABS approval.
-
-
-
-
-
Fluigent
microfluidic valve
Manufacturer Overview
Fluigent, founded in 2005 and located in Le Kremlin-Bicêtre, France, is a developer and manufacturer of fluid control systems. The company offers a broad range of products that include microfluidic devices, modular OEM microfluidic flow controllers, microfluidic OEM pressure controllers, and OEM microfluidic pressure sources. These products find general use in the field of microfluidics, allowing for the precise manipulation and control of small fluid volumes. The company’s products cater to industries, including life sciences for genomics and cell analysis, drug discovery, biotechnology, chemical analysis, and diagnostics.
-
-
-
-
-
Nihon Pisco Co., Ltd.
Valve
Manufacturer Overview
Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.
-
-
-
-
-
Asahi Organic Chemicals Industry
Manual Valve
Manufacturer Overview
ASAHI YUKIZAI CORPORATION, formerly known as Asahi Organic Chemicals Industry, is a Japanese manufacturer headquartered in Taito-ku, Tokyo, and specializes in resins and plastic valves since its establishment in 1945. The company manufactures valve and piping systems, including manual & automatic valves, pipes, fittings, and mixers. It also offers various foundry materials such as resin and sand products for casting, along with functional resins which cater to housing, construction, and industrial applications. The company engages in the design and construction of water utility facilities & reuse of wastewater, industrial water & wastewater treatment, environmental pollution prevention & purification, and public sewage management.
-
-
-
-
-
Fujikin
Manual Valves
Manufacturer Overview
Fujikin was founded in 1930 and headquartered in Itachibori Nishi-ku, Osaka, Japan is a manufacturer of specialized valve equipment. The company offers a wide variety of valves including Ultra-precision valves for semiconductor manufacturing, Cryogenic ultra-precision valves for space exploration, Aseptic process valves for pharmaceutical and food manufacturing, valves for new energy and rechargeable batteries, and valves for nuclear power plant instrumentation. Additionally, the company has diversified its portfolio to include the development of cutting-edge medical equipment. This expansion includes the creation of ultrasonic diagnostic equipment, universal X-ray photography devices, telemedicine systems, and healthcare monitoring devices.
-
-
-
-
-
-
-
Ninbo SIO Fluid Equipment Co., Ltd.
Manual Valves
Manufacturer Overview
Ninbo SIO Fluid Equipment Co., Ltd., founded in 2002 in Ningbo, Zhejiang, China, is a manufacturer and supplier of both automated and manual valves, including globe valves, ball valves, check valves, gate valves, and butterfly valves in stainless steel, carbon steel, alloy, and duplex stainless materials. The company's industrial valves are widely used in various applications, including water treatment, chemical processing, pulp and paper, oil and gas, and power generation.
-
-
-
-
-
Bucher Hydraulics GmbH
Manual Valves
Manufacturer Overview
Bucher Hydraulics GmbH, founded in 1923 in Germany, is a global manufacturer of hydraulic drive and control technologies for mobile and industrial hydraulic applications. The company's products include hydraulic cylinders, pumps, manifolds, lift tables, and workbenches. Bucher Hydraulics GmbH products are used in elevators, agricultural machinery, lifting equipment, and construction equipment. Their hydraulic drive and control systems are used in wheel loaders, excavators, and concrete boom trucks. The company also offers custom product design, engineering, and production to meet specific requirements.
-
-
-
-
-
WEH GmbH
Manual Valves
Manufacturer Overview
WEH Technologies Inc., USA was created in 2008 in Texas as the American branch of WEH GmbH which was founded in 1973 in Germany. The company is a designer and manufacturer of components for the gas and hydrogen refueling industries. The company’s 4 product lines are Quick Connectors, CNG Refueling Components, H2 Refueling Components, and Check Valves. Quick Connectors are used in manufacturing, automation, HVAC, and other industrial uses. CNG Refueling Components are used in CNG vehicles, car stations, and bus stations. Hydrogen Refueling Components are used in hydrogen vehicles and refueling stations.
-
-
-
-
-
Stäubli International AG.
Manual Valves
Manufacturer Overview
Stäubli began in Horgen, Switzerland in 1892. Stäubli designs, produces, distributes, and provides support for products for numerous industries including aerospace, alternative fuels, medical devices, packaging, photovoltaics, and semiconductors. Stäubli has 4 primary product lines including electrical connectors, fluid connectors, robotics, and textile. Electrical connector products include cable couplers, modular connectors, and test and measurement connectors. Fluid connectors include mold clamping systems, quick and dry disconnect couplings, and safety breakaway couplings. Robotics include industrial robots, collaborative robots, and mobile robots. Textile includes weaving preparation and frame weaving.
-
-
-
-
-
Nutec Bickley
Manual Valves
Manufacturer Overview
NUTEC GROUP was founded in 1975 and is headquartered in Santa Catarina, Mexico. NUTEC is a designer of industrial heating systems serving the metals and ceramics industries. NUTEC offers services including technical service and support, fabrication and installation services, retrofitting, and providing spare part services. Product offerings include industrial kilns, industrial furnaces, heat treatment automated production Ines, industrial electric furnaces, ovens & dryers for lower temperature, pyrolysis furnaces for paint stripping, afterburners/thermal oxidizers, hot air generators, ladle & roundish preheaters, combustion systems & controls, fabrication and installation services, carbon regeneration kilns, and investment casting furnaces.
-
-
-
-
-
IPEX
Manual Valves
Manufacturer Overview
IPEX by Aliaxis is headquartered in Oakville, Ontario. IPEX is a producer of pipe-related solutions defined in 6 categories: municipal, plumbing & mechanical, industrial, electrical, PE electrofusion, and irrigation. The company's municipal solutions include pressure piping and sewer piping systems in addition to specialty products. Plumbing & Mechanical solutions also include fire protection, gas venting systems, and potable water systems. Compressed air and acid waste systems are used in industrial systems. Light fixtures and ducts are keystones of the electrical solutions segment.
-
-
-
-
-
Honeywell International Inc.
MANUAL VALVES & FILTERS
Manufacturer Overview
Honeywell International Inc., founded in 1906, in Wabash, Indiana is manufacturer of automotive parts, building technologies, and performance and safety materials for aerospace, The company's product portfolio includes electronic guidance systems, cockpit instrumentation, lighting, automotive parts, and primary propulsion and secondary power turbine engines. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. Their headquartere is located in Carolina and they have global sales offices and distributions channels.
-
-
-
-
-
Polypipe
UFCH Mixing Valve
Manufacturer Overview
Polypipe was established in 2000 and is headquartered in Doncaster, England, as a manufacturer, developer, and producer of plastics and sustainable solutions. The product portfolio of the company includes Polypipe Polyguard Coil 25mm, Polypipe Cap/Plug 25mm, Polypipe Adaptor 25mm, and Polypipe Reducer 32mm, among others. It also offers terrain drainage, water supply, ventilation, water management solutions, and underfloor heating. The products are utilized to ensure the supplying of clean and safe potable water supplies in areas with contaminated land. The company caters to the building services, civils and green urbanization, homeownership and self-build, and housing markets.
-
-
-
-
-
ECONEX S.R.L.
Ball valves for gas SF
Manufacturer Overview
ECONEX S.R.L. is a manufacturer of industrial combustion components as well as HVAC actuators that was established in 1997 and is based in Milan, Italy. The company's products include flame and tightness control devices, pressure regulators, solenoid valves, electric actuators, and flexible metal hoses. It also offers complete as well as assembled industrial gas trains. The company's products are mainly used by clients in the ceramic, heating, glass, food production, and metal industries.
-
-
-
-
-
GESTRA AG
Isolation Valves
Manufacturer Overview
GESTRA AG is headquartered in Bremen, Germany, since 1902 as a designer and manufacturer of valve and control systems. The company deals in boiler controls, steam traps, isolation, and control valves. It also offers check valves, strainers, and service control valves. The products have multiple applications in general manufacturing, chemical, power generation, boiler manufacturing, and oil & gas industries. The products are also essential in maximizing system efficiency and minimizing water consumption in the pulp and paper market. Its services include system auditing, project engineering, steam trap surveys, and automatic broiler control.
-
-
-
-
-
BEULCO GmbH und Co. KG
TAPPING VALVES
Manufacturer Overview
BEULCO GmbH und Co. KG is a German manufacturer of water supply components and systems that was established in Attendorn in 1951. The company’s products include water supply system components, such as regulators, valves, and couplings. It also offers development and production of custom brass parts, castings, and forgings. The company is certified to ISO 9001, ISO 14001, and ISO 45001 standards, and chiefly serves clients in the water supply, civil engineering, and industrial sectors.
-
-
-
-
-
Lockwood Products, Inc.
valve
Manufacturer Overview
Lockwood Products, Inc., founded in 1981 and headquartered in Lake Oswego, Oregon, is a manufacturer of unique fluid power and motion control products. The company offers a diverse range of products, including modular hose systems, quick-connect fittings, and flow control valves. The products are designed to provide flexibility, allowing users to create customized fluid handling systems for various applications. These solutions are particularly beneficial for industries requiring fluid transportation, such as automotive, manufacturing, and healthcare, delivering optimal-quality components that enhance fluid power efficiency and productivity. The products are FDA, REACH, RoHS, and SVHCs compliant, and exports globally.
-
-
-
-
-
Aalberts integrated piping systems
valves
Manufacturer Overview
Aalberts, established in 1975 and headquartered in Charlotte, North Carolina, is a manufacturer and supplier specializing in integrated piping systems for the distribution and control of liquids and gases. The company’s product portfolio includes ball valves, butterfly valves, safety relief valves, fasteners, and more, catering to residential, commercial, industrial, and utility sectors worldwide. The company also offers vertically integrated designs, white label manufacturing of valves, fittings, and other piping system components for diverse projects. The company’s has a team of plumbing and mechanical system experts that provide technical support services to customers.
-
-
-
-
-
Bray International, Inc.
Manual Valves
Manufacturer Overview
Bray International, Inc., incorporated in 1986 and headquartered in Houston, Texas, USA, is a global manufacturer of flow control and automation products and accessories Its product line includes butterfly valves, ball valves, knife gate valves, control valves, and check valves. It also offers actuators, cryogenic products, and control accessories, including solenoids, sensors, and switch boxes. The company's performance-tested products meet various global certifications and approvals, including Lloyd's Register, UL, ABS, and more.
-
-
-
-
-
Humphrey Products
Manual Valves
Manufacturer Overview
Humphrey Products is an American manufacturer of pneumatic and liquid control products originally established in 1901 as General Gas Light Company before rebranding in 1990. Based in Kalamazoo, Michigan, the company produces various items including actuators, solenoid and mechanical valves, pressure regulators, and total air control (TAC) miniature fittings. They also offer design, engineering, and prototyping services for custom projects. Humphrey Products primarily serves clients in the medical, commercial, industrial, and aerospace sectors.
-
-
-
-
-
Saint-Gobain Life Sciences
Manual Valves
Manufacturer Overview
Saint-Gobain Life Sciences, headquartered in Solon, Ohio, is a manufacturer of polymer solutions and components that support the electronics, medical, and biopharma industries, among others. Its bioprocess solutions division provides material science-based solutions like silicone tubing and filtration products for single-use fluid management. The medical business manufactures custom medical components like cartridges and capsule filters and designs systems for medical devices. The consumer solutions business provides customer support to achieve performance, safety, and regulatory compliance, and it provides customized solutions like flowmeters, seals, and tubing. The electronics division manufactures products like valves and fittings for fluid handling applications.
-
-
-
-
-
Parker / Autoclave Engineers
Manual Valves
-
-
-
-
-
Oil-Rite Corporation
Manual Valves
Manufacturer Overview
Oil-Rite Corporation was founded in 1933 and is based in Manitowoc, Wisconsin. Oil-Rite is a designer and manufacturer of lubrication equipment used in industries as diverse as automotive, machining, and baking, as well as hydroelectric dams. Oil-Rite’s featured products include constant level lubricators, level gages, feed valves, and oil systems. Additional products include grease and oil dispensers, various valves, and sights. Oil-Rite also offers support including usage, lubrication levels, maintenance, and product selection for specific needs.
-
-
-
-
-
Mako Products LLC
Manual Valves
Manufacturer Overview
Mako Products LLC manufactures and supplies quality fluid system components, including Superlok compression tube fittings, a patented product popular for its perfect fitting. The company's other products include threaded needle valves, ball valves, JIC fittings & adapters, stainless steel tubing, and related products. The company was founded in 2012 and is based in Oklahoma, USA. Their products are designed for various industries, including petrochemical, shipbuilding and maritime, semiconductors, aerospace, and biopharmaceuticals.
-
-
-
-
-
Hydrasearch Defense
Manual Valves
Manufacturer Overview
Hydrasearch was founded in in 1962 in Annapolis, and now serves out of Stevensville, Maryland. Hydrasearch is a U.S. based manufacturer of specialized maritime and aerospace components for commercial, defense, and recreational purposes. Hydrasearch’s defense product categories include aerospace hose & fittings, marine hose & fittings, technical products such as valves & fittings, and underway replenishment products. Hydrasearch’s commercial and recreational products include aerators, air pipe heads, de-icers, deck drains, deck hardware, fountains, exhaust fittings, hose & clamps, nozzles, and miscellaneous hardware.
-
-
-
-
-
Hays Fluid Controls
Manual Valves
Manufacturer Overview
Hays Fluid Controls, since 1963, has been a supplier of valves such as auto & manual balancing valves, low-temperature valves, temperature control valves, industrial solenoid valves, and lead-free valves to the US Navy. Hose kits, piping packages, strainers, and valve actuators are produced for the equipment in office buildings, supermarkets, schools, hospitals, and commercial marine vessels. The company in East Fields Street, Dallas, NC, offers tools such as velocity calculators, pressure drop calculators, online price guides, and shipping status with same-day shipping.
-
-
-
-
-
Dk-Lok U.S.A.
Manual Valves
Manufacturer Overview
DK-Lok USA was established in 2010 and is the U.S.-based subsidiary of South Korean industrial parts maker, DK-Lok. DK-Lok serves industries such as offshore & onshore oil production, automotive & hydrogen fuel cells, shipbuilding & marine engines, petrochemicals & refinery, power plant, railway vehicles, and semiconductors. DK-Lok USA’s primary offerings are valves, fittings, regulators, hose, tubing, quick connectors, and tools such as hydraulic swaging units, electric swaging units, presaging tools, and tube & hose.
-
-
-
-
-
Cipriani Harrison Valves Corp.
Manual Valves
Manufacturer Overview
Cipriani Harrison Valves Corp., founded in 1983, is a manufacturer and supplier of valves, tank head fittings, pipeline comps, and valve manifolds. The valve types include butterfly, seat, sampling, check, and mix-proof valves made from bar stock and forged stainless steel to be used in dairy, brewery, pharma & bio-pharma, winery, and cosmetic markets. The company in Gujarat, India, is 3A authorized, has FDA & Class VI certified elastomers, offers product inspection and testing, and is ISO 9001:2015 certified.
-
-
-
-
-
OMIL Srl
Pressure Maintenance Valve
Company Overview
OMIL Srl, established in 1963 and based in Settimo Torinese, Turin, Italy, is a manufacturer of automation and milling machines. The company has spent forty years honing its gripping and handling system expertise. The products made by the company include grabbing systems, swivel units at two to three places, linear and mini-linear actuators, stationary chucks, and clamping force blocks. It is also specialised in integrator robots and makes assembly and specialty machinery. The company sells products directly or through distributors in Italy and through authorised distributors in other nations.
-
-
-
-
-
Liaoning Alsafe Technology Company Ltd.
Valves and accessories of Aluminum gas cylinder
Company Overview
Liaoning Alsafe Technology Company Ltd, established in 2011 and based in Tieling, Liaoning, China, is a manufacturer of aluminum and carbon fiber composite high-pressure gas cylinders. The company offers aluminum gas cylinders for storing compressed gasses, carbon fiber composite cylinders for high-pressure gas storage utilizing lightweight materials, and self-contained breathing apparatus (SCBA) cylinders for emergency or firefighting applications. It also offers paintball cylinders for paintball guns, and custom cylinder design services for unique projects. The company’s products are used by clients in the industrial manufacturing, processing, and logistics industries.
-
-
-
-
-
XHnotion Pneumatic
MANUAL VALVE
Company Overview
XHnotion Pneumatic, founded in 2007 and based in Ningbo, China, is a manufacturer and supplier of pneumatic power products. The company is certified to ISO 9001:2015 and has a CE, ROHS, and REACH certificate for the international market. The company’s customers include Johndeere, Univer, Sulzer, MEIDEN, Metalworks, and Wurth. It offers pneumatic fittings, air hoses, solenoid valves, air guns, and coupling products. The company’s pneumatic fittings include plastic pneumatic fittings, metal pneumatic fittings, mufflers, and push-button couplers.
-
-
-
-
-
Ningbo Dino-Power Machinery Co., Ltd.
Shut-off Valve
Company Overview
Ningbo Dino-Power Machinery Co. LTD (Dino-Power) is based in China with representative distributors available internationally. Dino-Power is both in-house and OEM producer for airless paint sprayer products. Dino-Power’s product line includes airless paint sprayers, other spraying equipment, and spare parts and accessories. Airless paint sprayers include piston and diaphragm pump designs, gas powered, airmix, and pneumatic sprayers, airless line marking machines and two component paint spray machines. Other equipment includes texture sprayers, stucco sprayers, hopper sprayers, and more.
-
-
-
-
-
EM-Technik
Ball Valves
Company Overview
EM-Technik is a manufacturer and supplier of fittings and connectors fabricated from special plastics that was established in Maxforf, Germany, in 1965. The company’s products include couplings, fittings, and valves for controlling or regulating the flow of liquids in industrial processes. These are fabricated from chemical-resistant fluoropolymer plastics such as PEEK, PTFE, and PVDF. It also offers related accessories, including clamps, tubes, and seals. The company’s products are used mainly by its clients in petrochemical processing, power generation, and water and wastewater treatment.
-
-
-
-
-
NAFFCO Group
VALVES & RISERS
Company Overview
NAFFCO (National Fire Fighting Manufacturing FZCO), established in 1991 and headquartered in Dubai, UAE, is a manufacturer and supplier of fire and safety equipment. Its product portfolio encompasses Life Safety Solutions, Fire Protection systems, Security systems, Firefighting Equipments, Fire Trucks, Ambulances, and Mobile hospitals, serving multiple industries. Notably, the company has received recognition through the Mohammed Bin Rashid Al Maktoum Business Award for excellence in exports and manufacturing, solidifying its name in fire safety and security solutions.
-
-
-
-
-
Kurt J. Lesker Company
Vacuum Valves
Company Overview
Kurt J. Lesker Company was founded in 1954 and is a manufacturer and distributor of vacuum equipments based in Jefferson Hills, Pennsylvania, United States. The company manufactures various vacuum products such as vacuum chambers, vacuum pumps, pressure measuring devices, polymer coatings, and thin film deposition systems. The products are used in various fields such as decorative coatings, aerospace, electronics, optics, and LED. The company has obtained the ISO 9001 standard certificate.
-
-
-
-
-
Tank Truck Service & Sales, Inc.
Manual Valves
Company Overview
Tank Truck Service & Sales, Inc. has been designing and building tank trucks since 1948 and is based in Warren, Michigan. The company is a manufacturer, assembler, and distributor of tank trucks and trailers. The company's product offerings include parts and components including tank truck equipment, bulk plant and storage tank equipment, dry break or dry disconnect fittings, valves, hose, hose reels, meters, swivel joints, gaskets, and pipe sealants. Tank truck offerings include refined fuel trucks and trailers, LGP trucks, and specialty tank trucks. Additionally, The company offers metalwork, equipment work, dot testing, paintwork, and sensor repairs.
-
-
-
-
-
PARKER HANNIFIN CORP
Manual Valves
Company Overview
Parker Hannifin Corporation was founded in 1917 and is headquartered in Cleveland, Ohio. Parker Hannifin is a manufacturer and distributor of motion and control technologies and systems for markets including mobile, industrial, and aerospace. Parker-Hannifin operates through two segments: diversified industrial and aerospace systems. Diversified industrial offers sealing, shielding, thermal products and systems, adhesives, diagnostics solutions, and hydraulic, pneumatic, and elctromechanical components and systems or industrial machinery and equipment. The aerospace segment offers control actuation systems and components, engine exhaust nozzles and assemblies, pilot controls, as well as others.
-
-
-
-
-
Lumaco
Manual Valves
Company Overview
Lumaco, established in 1961, and headquartered in Hackensack, New Jersey, is a supplier and distributor of valves and valve components for various industries. The company offers a range of products, such as doubledisk valves, butterfly valves, check valves, and pressure relief valves in which their valve solutions cater to industries such as food and beverages, and dairy industry. Lumaco's valves and components are designed for flow control, regulation, and isolation, ensuring efficient and safe operation in industrial applications. Lumaco prioritizes quality and delivers industry-standard valve solutions to meet their customers' needs.
-
-
-
-
-
Jamieson Equipment Co., Inc.
Manual Valves
Company Overview
Jamieson Equipment Company (JEC) was founded in 1982 and located in the state of Georgia. JEC serves infrastructure-related industries including pavement with concrete, aggregate, and asphalt, chemicals, sewage and waste management, and agriculture and food. JEC sells, installs, retrofits, repairs, and offers training and troubleshooting for a range of components and tools from simple fittings to motion sensors to electronics to valves to actuators, cranes, mixers, silos, hoppers, and plants.
-
-
-
-
-
Indventech, LLC
Manual Valves
Company Overview
Indventech was born in 2009 and headquartered in Greer, South Carolina. Indventech is a manufacturer, distributor, and service provider for industrial ventilation technologies. Indventech’s product categories include hunter fans, wall exhaust panel fans, roof fans, fans and collectors, dust collection systems, industrial wall exhaust fans, belt drive fans, HVLS fans, duct fans, blowers, ducts, jan fans, and more. Indventech provides additional services such as installation, laser alignment, balancing, vibration analysis and in-house and field repair.
-
-
-
-
-
FLSmidth, Inc.
Manual Valves
Company Overview
Important Papers, Inc. was founded by Ruth Barnett in South Jersey in the early 1990s. Important Papers is a distributor of promotional items and custom apparel for company promotion. Examples of Important Papers, Inc. promotional items include: apparel such as t-shirts, office wear, outerwear, bottoms, sunglasses, and activewear; headwear such as caps, hats, beanies, visors, safety items, and bandanas; bags such as tote, backpacks, office & school, outdoor & fitness, and travel; drinkware, fun, health, office, tech, writing, and other miscellaneous items.
-
-
-
-
-
Erdmann Corp.
Manual Valves
Company Overview
Erdmann Corp. is a distributor of industrial valves and related equipment that was established in Kentucky, USA, in 1933. The company’s product inventory includes boiler controls for indoor heating applications, actuated valve accessories for material flow, and pressure regulators for safety applications. It also offers custom fabrication, repair, and field service or troubleshooting for clients requiring additional support. The company chiefly serves clients in the chemical and petrochemical, distillery, and water and wastewater processing industries.
-
-
-
-
-
Caylor Industrial Sales, Inc.
Manual Valves
Company Overview
Caylor Indstrial Sales, Inc. was founded in Dalton, Georgia in 1980. Today, Calor serves a number of sectors of the industrial market, in particular engineering, construction, manufacturing, paper mills, and chemical plants. The company is a distributor of many industrial components including valves, fittings, pipe and tube hangers, actuators, and water, steam, and air regulators. The company also offers services as a manufacturer of both low and high-volume production custom parts using a variety of materials including steel, stainless steel, aluminum, brass, Delrin, and Lexan.
-
-
-
-
-
-
-
-
-
ANDREAS MAIER GmbH & Co. KG
Valve, pressure switches, rotary couplings
-
-
-
-
-
ALFA LAVAL
Manual Valves
Company Overview
Alfa Laval, founded in 1883 and headquartered in Toronto, Canada, is a supplier of heat transfer, separation, and fluid handling products like boilers, separators, and heat exchangers. The company’s operations are based on three key technologies, which are heat transfer, separation, and fluid handling, and it helps farmers separate, process, and store milk products. The company has 42 production units, out of which 22 are based in Europe, and it sells its products in over 100 countries. It invests about 2.5% of its total yearly sales in research and development, resulting in around 25-30 new product launches per year.
-
-
-
-
-
Paani Precision Products LLP.
Brass Ball Valve
Distributor Overview
Paani Precisions, a supplier, prioritizes customer satisfaction through efficient services, optimal packaging, and cost-effective rates. Inquiries are encouraged for timely responses and personalized deals. The company is set in its pursuit of excellence in both products and services, known for its responsive customer service. Through ongoing innovation for quality and packaging enhancements, the company ensures timely shipments and reduced delivery issues. With an extensive nationwide network in India, it sources products at competitive rates as scheduled, offering a comprehensive range of solutions at competitive prices.
-
-
-
-
-
Sampling Systems Ltd
valve
Distributor Overview
Sampling Systems Ltd., established in 1991 and headquartered in Coleshill, UK, is a supplier that develops and supplies water level meters. The company offers a wide range of products, including samplers, dispensing equipment, sterile sampling equipment, accessories, and more. It also offers laboratory equipment such as pH meters, conductivity meters, and thermometers. Its automated sampling systems eliminate human discretion in sample collection, reducing potential human error in the sampling process. It serves a range of industries, including FnB, petrochemicals, pharmaceuticals, environmental, and more.
-
-
-
-
-
Maximator GmbH
Valves, Fittings & Tubings
Distributor Overview
Maximator GmbH, established in 1885 and headquartered in Nordhausen, Germany, is a supplier of high-pressure technology, testing technology, hydraulics, pneumatics as well as hydrogen technology. The company offers a range of products, from fittings to modular gas compressor systems. It also offers customer-oriented services such as burst pressure, autofrettage of components, and a large number of inspections on CNG. Its pumps are rugged, rebuildable, and can tolerate all installation positions. The company has TÜV certification for its valves, fittings, and tubing, serving diverse industries, including automotive, energy, chemical, and semiconductor industries.
-
-
-
-
-
United P & H Supply Co.
Manual Valves
Distributor Overview
United P&H Supply Company was founded in Milwaukee, Wisconsin in 1922. United is a distributor of industrial PPVF, sanitary, and technical products for several markets including biotech, primary metals, shipbuilding, commercial construction, and healthcare facilities. The company's product offerings include pipe & tube, pumps, flow instrumentation, pressure and temperature controls, and tank devices. Additionally, the company offers services including valve automation, vendor-managed inventory, and EDI to ensure proper order fulfillment, delivery, and product operation.
-
-
-
-
-
Springer Pumps, LLC
Manual Valves
Distributor Overview
Springer Pumps, LLC was established in 16 in Eastern Pennsylvania and isa distributor for fluid handling solutions for the food & beverage, CPI, personal care, utility, refining, power generation and industrial wastewater markets in the Northeast and Mid-Atlantic regions of the US. Springer Pumps specializes in pumps, mixers, product recovery systems, and tank cleaning components including diaphragms, metering, mixers, sumps, and accessories. Springer Pumps also offers aftermarket replacement parts, kits, mechanical seals, mixer parts, and heat exchanger parts.
-
-
-
-
-
PEP, A Ryan Herco Flow Solutions Company
Manual Valves
Distributor Overview
Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.
-
-
-
-
-
Penn Radiant Products
Manual Valves
Distributor Overview
Penn Radiant Products was started in 1963 and is currently headquartered in Pittsburgh, Pennsylvania. The company is a distributor of heating and cooling systems and components to HVAC and other markets across Pennsylvania through Illinois. The company operates in four market segments: Gas Heating, Electric Heating, Parts, and Cooling. The gas Heating segment includes gas-fired and diesel-fired heaters, thaw sheds, ceramic heaters, and flame torches. The Electric Heating segment includes space heaters, quartz heaters, and others. The Cooling segment includes spot coolers, drum fans, and AC units.
-
-
-
-
-
Modern Fluid Power, Inc.
Manual Valves
Distributor Overview
Modern Fluid Power Inc (MFP) was established in 1970 on the outskirts of Blanchester, Ohio. Modern Fluid Power is a distributor for specialized industrial equipment. Among MFP’s product lines are actuator parts, actuators, and actuator components, liquid levels, flow sights, thermometers, sight plugs, pressure gauges, & pressure switches, hydraulic cylinders, tube fittings, valves, hydraulic accessories, pipe fittings, pipe line strainers, backflow preventers, water gauges, directional control air valves, filters, regulators, lubricators, air cylinders, and ball, safety, relief, butterfly, solenoid, check, needle, gate, & globe valves.
-
-
-
-
-
Koehler Rubber & Supply Co.
Manual Valves
Distributor Overview
Koehler Rubber & Supply Co. (Koehler) was founded in 1917 and operates out of Independence, Ohio. Koehler is a distributor for specialty fluid application products. Product offerings include spray finishing equipment, fluid pumping and handling, lubrication, hoses, sealants, adhesives, meter mix, dispense systems, spray systems, hydraulic & pneumatic equipment such as adapters and fittings, and measuring devices such as gauges and thermometers. Koehler also offers value-added services such as system design, service & repair, maintenance training, operator training, and efficiency analysis.
-
-
-
-
-
Guenther Supply, Inc.
Manual Valves
Distributor Overview
Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.
-
-
-
-
-
Green Rubber-Kennedy AG, LP
Manual Valves
Distributor Overview
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
-
-
-
-
-
AutomationDirect Inc.
Manual Valves
Distributor Overview
AutomationDirect.com was founded in 1994 to provide solutions for the industrial automation market and has been growing its list of offerings ever since. AutomationDirects’ extensive catalog includes individual components such as cables, various controls, I/O devices, relays, gauges, fittings, and sensors to complete systems. Many parts and devices, especially PLC units are customizable. AutomationDirect.com also provides support via video instructions, online manuals, a learning library, an active community forum to further assist customers.
-
-
-
-
-
American Precision Supply, Inc.
Manual Valves
Distributor Overview
American Precision Supply (APS) was founded in the 1980s and is based in Hampshire, Illinois. Hampshire distributes products that serve the chemical, biotech, wastewater, power generation, pharmaceutical, medical, commercial, food/beverage, municipal, education, and OEM markets. APS product offings include TLV steam products, control valves, steam traps, actuation, instrumentation, corruption resistant components, pipe fittings, commercial, sanitary, pipe, and steam and condensate components. APS offers precision pipe cutting, grooving, threading, custom lined pipe spools, inventory management programs, surveys, and valve repair.
-
-
Manual Valve Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | FW Murphy |
2.7%
|
| 2 | Schubert & Salzer, Inc. |
2.7%
|
| 3 | Valtorc International |
2.7%
|
| 4 | Seelye Acquisitions, Inc. |
2.7%
|
| 5 | Albert Fezer Maschinenfabrik GmbH |
1.8%
|
| 6 | Liaoning Alsafe Technology Company Ltd. |
1.8%
|
| 7 | OPW ENGINEERED SYSTEMS CORPORATE |
1.8%
|
| 8 | Prince Manufacturing Corporation |
1.8%
|
| 9 | Ninbo SIO Fluid Equipment Co., Ltd. |
1.8%
|
| 10 | Gemini Valve |
1.8%
|
Derivation Method
The ranking is calculated based on the click share within the manual valve page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Hitachi Metals, Ltd.: 27,771
- Fujikin: 5,858
- CKD: 4,660
Newly Established Company
- Maedler North America: 2020 (4 years ago)
- Liaoning Alsafe Technology Company Ltd.: 2011 (13 years ago)
- XHnotion Pneumatic: 2007 (17 years ago)
Company with a History
- Lechler GmbH: 1879 (145 years ago)
- Stäubli International AG.: 1892 (132 years ago)
- GESTRA AG: 1902 (122 years ago)
Manual Valve Manufacturers in United States
*Including some distributors, etc.
- Vaishnavi Metal Products Corporation Pvt.
- Bionomic Industries, Inc.
- ROSS Controls
- Prince Manufacturing Corporation
- FW Murphy
- Kurt
- OPW ENGINEERED SYSTEMS CORPORATE
- Plast-O-Matic Valves, Inc.
- Gemini Valve
- Schubert & Salzer, Inc.
- Norgren Ltd
- Hamilton Company
- Viega USA
- Valtorc International
- The Kraissl Co., Inc.
- Swagelok
- SUPERLOK USA
- SSP Fittings Corp.
- Seelye Acquisitions, Inc.
- Papailias Inc.
- Ogontz Corp.
- NIBCO INC.
- Micromold Products, Inc.
- Metrex Valve Corp.
- Merrick Industries, Inc.
- Marquest Scientific, Inc.
- Maedler North America
- Lee Industries, Inc.
- Kitz Corp. of America
- Kelly Pneumatics, Inc.
- International Polymer Solutions, (iPolymer)
- Hydrasearch Company LLC
- Hydrasearch Commercial
- HYDAC Technology Corporation
- Hayward Flow Control
- EVSCO, Inc.
- Entegris
- Discover Valve
- DFT Inc.
- Coronet Parts Mfg. Co., Inc.
- Conval
- Clippard
- Century Instrument Co.
- Cash Acme
- Baelz North America
- Badger Meter, Inc.
- Assured Automation
- ASC Engineered Solutions, LLC
- Aqua Environment Co., Inc.
- Anchor Fluid Power
- Aero Space Controls Corp.
- International Polymer Solutions
- TVI Valves
- Texas Industrial Remcor, Inc.
- Stephens Mfg. Co., Inc.
- Steel & O'Brien Manufacturing
- Seal Fast, Inc.
- SC Fastening Systems
- RED-WHITE VALVE CORP.
- Pro Dyne Corp.
- Metro Hydraulic
- MAXPRO Technologies, Inc.
- Sterlco Sterling Authorized Dist. - M & M Control
- Kinequip, Inc.
- Jensen Inert Products
- Jaygo, Inc.
- Industrial Specialties Mfg., Inc.
- East Bay Distributors Inc.
- Doering Company
- Distributor to Industry, Inc.
- Asahi/America, Inc.
- ARI Valve Corp.
- World Wide Metric, Inc.
- Ryan Herco Flow Solutions (HQ)
- Orr & Orr, Inc.
- Oil-Air Products, LLC.
- Ohio Pipe, Valve & Fittings, Inc.
- National Tank Outlet
- Maxpro South, Inc.
- Marcuse & Son, Inc.
- Liquidyne Process Technologies, Inc.
- E-Motion, Inc.
- Dunham Rubber & Belting Corporation
- Dawson-Macdonald Co., Inc.
- Compressed Air Systems, Inc.
- Circle Valve Technologies Inc.
- Strahman Group
Global Distribution of Manual Valve Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
87 | 69.0% |
Germany
|
8 | 6.3% |
Italy
|
7 | 5.6% |
Japan
|
7 | 5.6% |
China
|
5 | 4.0% |
Taiwan
|
2 | 1.6% |
United Kingdom
|
2 | 1.6% |
France
|
2 | 1.6% |
Finland
|
1 | 0.8% |
Slovenia
|
1 | 0.8% |
Switzerland
|
1 | 0.8% |
Mexico
|
1 | 0.8% |
Canada
|
1 | 0.8% |
India
|
1 | 0.8% |
