53 Jack Manufacturers in 2024
This section provides an overview for jacks as well as their applications and principles. Also, please take a look at the list of 53 jack manufacturers and their company rankings. Here are the top-ranked jack companies as of April, 2024: 1.G&G Manufacturing Co., 2.Mile-X Equipment, Inc., 3.Atlanta Drive Systems.
Table of Contents
What Is a Jack?
A jack is a tool for lifting an object.
A jack can be operated in three different ways. Mechanical jacks rotate screws or gears, liquid-actuated jacks use hydraulic pressure, and air-actuated jacks use a compressor or other device to feed air into the jack. Typical mechanical jacks are ratchet screw jacks, screw jacks with bearings, and rack-driven jacks. Hydraulic jacks are mainly used for liquid-actuated jacks.
A jack with various load capacities (maximum load) is also available. These include small jacks with a load capacity of about 3kg for tabletop hobbyists and experimenters, jacks with a load capacity of 2-5 tons for use in automobile repair and construction sites, and lifts (jack) with a load capacity of 5 tons or more for use in factory installations.
How to Use Jacks
This section describes how to use jacks with a load capacity of 2 to 5 tons, which are used for many types of work, and explains the precautions to be taken when using jacks.
- Checking the installation point (contact point) of the object to be lifted
Determine the jack's installation point on the object to be lifted. Some objects, such as automobiles, have predetermined installation points. If not, determine the installation point in consideration of the work area and load balance. Select a hard place for the installation point that can withstand the lifting force. - Installation of jacks
Select a level, hard, stable location for the installation surface. - Jacking up the object
Operate the jack to raise the object slowly. When raising the object, check the following points: The condition of the installation surface (whether it is stable or not), the installation point of the object (whether it is not being dug into), and the balance of the object (whether it is moving sideways or not). - Work
It is prohibited to start work immediately after the object is raised. The jacks are merely lifting the object, and there is a risk that the object will lose its balance and fall over. Work should be started only after fall prevention measures have been taken, such as supporting the object with rigid racks, etc. - Jacking down
Operate the jack to slowly lower the object. In the same way as when ascending, slowly lower the object while checking the condition of the installation surface, the object's installation point, and the object's balance.
How to Select a Jack
When selecting jacks, the most important factors to consider are the load capacity and height. Also, select the type of jack according to the work. The below information explains the advantages and disadvantages of each type and their uses:
- Load Capacity
The maximum weight that jacks can lift is called the load-bearing weight. It is important to select jacks with a load capacity greater than the weight of the object to be lifted. If the weight of the object cannot be exceeded with single jacks, multiple jacks should be used to lift the object. - Height
The lowest height that jacks can lift is called the minimum height, and the highest height is called the maximum height. Select jacks that can provide the necessary height for the work. - Merits and demerits of each type
The advantages and disadvantages of each type are as follows Select the appropriate type for the work area and the work to be performed
The advantage of the mechanical type is that it is lighter in weight and easier to handle than the liquid-operated type. Also, by using it horizontally, there is an advantage that the object can be moved laterally. Ideal for use when carrying a jack. The disadvantages are low work efficiency and the internal screws and gears are easily broken.
The liquid-actuated type is heavier than the mechanical type but has the advantage of high work efficiency. Recently, small types that can be easily transported are also available. It is mainly used in automobile repair and construction work. Disadvantages are that it cannot be used sideways and that handling such as oil leakage requires attention.
The advantage of the air-operated type over the liquid-operated type is that it can be used safely without risk of oil leakage or ignition. Today, various types are available: compressor type, exhaust gas type, and manual pump type. It is advisable to select the type that best suits the work to be performed. However, the disadvantage of jacks with a large load capacity is that they require a compressor, which can be cumbersome.
List of 53 Jack Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- Canada
- China
- Denmark
- France
- Germany
- India
- Italy
- Romania
- Turkey
- United Kingdom
-
-
-
JPW Industries, Inc.
Bottle Jacks
Manufacturer Overview
JPW Industries, Inc. is an American manufacturer of industrial machinery and equipment that was established in 1958. Based in La Vergne, Tennessee, the company produces metalworking and woodworking machinery such as lathes and saws, hand tools, and lifting systems. Its products are distributed under various brand names including Baileigh, Axiom, Jet, Powermatic, and Wilton. JPW Industries primarily serves clients in the industrial manufacturing, fabrication, construction, and repair industries. The company also offers technical support to clients within the United States.
-
-
-
-
-
Columbus McKinnon Corporation
Screw Jacks
Manufacturer Overview
Columbus McKinnon Corporation, founded in 1875 and headquartered in Charlotte, North Carolina, is a manufacturer of intelligent motion products used for automation, conveyance, lifting, and linear motion. Its product range includes handheld transmitters, flexible chain conveyors, lever hoists, industrial linear actuators, and pallet systems used in several industries, including aerospace, entertainment, automotive, metals production, and pharmaceutical. The company is ISO 9001 certified and has manufacturing facilities across Africa, Asia, Europe, Latin America, and North America. It has several brands, including STAHL Crane Systems, Dorner Conveyors, Duff-Norton, Magnetek, and Unified Industries.
-
-
-
-
-
RMI Laser
Toe jacks & powered systems
Manufacturer Overview
RMI Laser, established in 1998 and headquartered in Lafayette, Colorado, United States, is a manufacturer specializing in laser marking systems. Its product lineup includes the Premium Fiber Laser Marker, Ultra Compact Portable Laser, Green Laser (532nm), Laser Marking Work Stations, and Laser Marking Software. These solutions cater to industries like aerospace, automotive, medical, and semiconductor, addressing diverse needs from branding to serialization. The company holds prestigious certifications, including CE, ISO 9001:2015, and ITAR compliance, ensuring safety and quality.
-
-
-
-
-
-
-
NOOK INDUSTRIES, INC
Screw Jack
Manufacturer Overview
NOOK INDUSTRIES, INC, established in 1969 in the United States, is a manufacturer and supplier specializing in precision linear motion systems and components. The company offers a comprehensive range of products, including ball screws, linear actuators, and linear guides. NOOK INDUSTRIES, INC has been a pioneer in the field of linear motion technology. Their products find applications in industries like automation, robotics, and manufacturing, enabling precise and efficient motion control solutions. NOOK INDUSTRIES, INC's unique worth lies in their devotion to providing customizable linear motion solutions, such as ball screws that enhance CNC equipment and automation systems.
-
-
-
-
-
Mile-X Equipment, Inc.
Universal Scissor Jack
Manufacturer Overview
Mile-X Equipment, Inc., founded in 1979 and located in Coldwater, Ohio, USA, is a manufacturer of automotive and industrial equipment. The product offerings include automotive service equipment, such as tire changers, wheel balancers, and automotive lifts, along with industrial equipment like shop presses and oil filter crushers. These products are designed to improve efficiency, productivity, and safety in automotive repair shops, industrial facilities, and manufacturing plants. The solutions find applications across various industries, including automotive repair, heavy equipment maintenance, metalworking, and manufacturing.
-
-
-
-
-
D.L. Martin Co.
Elevator Jacks
Manufacturer Overview
D.L. Martin Co., founded in 1943, is headquartered in Mercersburg, Pennsylvania, USA, and is a manufacturer specializing in precision machining and fabrication services. The company specializes in manufacturing precision-engineered metal components for aerospace, defense, transportation, energy sectors, and custom applications, including assemblies for specialized industries. It has received awards such as the prestigious Industry Excellence Award in 2015. Additionally, it holds certifications like ISO 9001:2015 for quality management systems and safety.
-
-
-
-
-
Macton Corporation
ELECTRIC JACKS
Manufacturer Overview
Macton Corporation, founded in the USA in 1947, is a manufacturer of turntable systems, lifting, and conveying systems for applications in transportation and commercial sectors. The company produces moving structures that are customized to order, expertly fabricated, and installed. Its product range includes rail maintenance equipment, rail lifting and hoisting machinery, industrial turntables, and conveying systems designed for moving large, discrete loads. Its primary industries of operation encompass industrial machinery and equipment manufacturing. Its equipment is now provided and supported by BBM Railway Equipment, LLC., which offers long-term spare parts and technical support services for all of its products.
-
-
-
-
-
G&G Manufacturing Co.
Jacks
Manufacturer Overview
G&G Manufacturing Co. is an American manufacturer of power transmission products and parts that was founded in 1943. Based in Omaha, Nebraska, the company produces over 3,500 standard transmission components including light duty sheaves and bushings, sprockets, power take-off (PTO) drivelines, and roller chains. These are used by clients in the material handling, military, mining, and agricultural sectors. G&G also offers engineering and fabrication services for customer projects that have unique specifications.
-
-
-
-
-
DEPRAG USA
Aero-Jacks
Company Overview
DEPRAG USA is the Lewisville, Texas-based headquarters of DEPRAG, originally founded in 1931. DEPRAG is a distributor of assembly equipment and tools and industrial machinery. DEPRAG’s product lines include advanced screw driving technology with automatic screwdrivers, sequence controllers, measuring technology, accessories, and individual solution offerings. Other product segments include feeding technology including bowl feeders and sword feeders among others, automation including standardized assembly systems and intelligent manual work stations, air motors featuring vane motors and turbine motors, industrial tools, and “Green Energy Turbines segment featuring energy recovery.
-
-
-
-
-
Venture Mfg. Co.
Coupler & Jack Unit
Company Overview
Venture Mfg. Co., established in 1971 and based in Dayton, Ohio, USA, is a manufacturer and supplier of Linear Actuators. The company's product range includes Linear Actuators, Electric Linear Actuators, RV Slide-Out Actuators, DC Actuators, and Commercial Actuators. These products find applications in movements that require a straight-line push or pull motion. They primarily serve industries such as Recreational Vehicles, Solar Tracking, Medical Industry, and Renewable Energy. The company also provides services like CAD/CAM Design, Prototype Creation, Product Engineering, and Actuator Manufacturing.
-
-
-
-
-
Atlanta Drive Systems
High-Performance Screw-Jacks
Company Overview
Atlanta Drive Systems, founded in 1943 and located in Farmingdale, New Jersey, is a supplier of drive systems. The company’s broad range of products includes gear racks, pinion ears, servo reducers, linear actuators, and washdown gearboxes. These products play a fundamental role in automation and robotics for precise and controlled movement, industrial machinery for applications like material handling and manufacturing, motion control for regulating speed and torque, linear motion systems for accurate positioning, and the food and beverage industry. The company’s products are used to enable precise movement, control, and efficiency in mechanical and automated systems across diverse sectors.
-
-
-
-
-
Joyce/Dayton Corp.
Ball Screw ComDRIVEs
Company Overview
Joyce/Dayton Corp. was established in 1873 and is headquartered in Kettering, Ohio. The ISO 9001:2015 certified company is a manufacturer of screw jacks, actuators, and lifting equipment to customers in aluminum smelting, marine, solar energy, and nuclear industries across North America through external distributors. The company’s product segments include screw jacks, actuators, cylinders, solar products, and others. Solar products include solar tracking jacks and actuators as well as custom solar trackers designed to enhance the efficiency of standard solar panels.
-
-
-
-
-
CURT Manufacturing LLC
TRAILER JACKS
Company Overview
CURT Manufacturing LLC founded in Eau Claire, Wisconsin, USA, in 1993, is a manufacturer and distributor of towing products and truck accessories. The company’s product portfolio includes trailer hitches, towing electrical components, weight distribution systems, cargo carriers, and tow bars. It also offers a roof rack cargo carrier to utilize the space on top of the vehicle. Its products are IATF 16949:2016 certified. The company’s products serve passenger cars, commercial trucks, and other vehicles.
-
-
-
-
-
Premier Manufacturing
Trailer Jacks
Company Overview
Premier Manufacturing founded in Tualatin, Oregon, USA, in 1924, is a manufacturer and distributor of tractor-trailer components for the trucking industry. The company provides products including pintle hitches, couplings, drawbar eyes, front-end assemblies, and jacks. Its trailer jacks have seamless tubing and an optional compression system that absorbs shock, they also have a convenient oil cup for lubrication and each jack is rebuildable for ease of service. Its products serve heavy-duty, medium-duty, and light-duty trailers. The company also provides trucking parts and accessories.
-
-
-
-
-
-
-
Valworx, Inc.
Pullers and Jacks
Distributor Overview
Valworx is a leading supplier of actuated valves and accessories. Valworx can provide you with Stainless, brass, PVC, sanitary ball and butterfly valves. Electric, pneumatic and manual actuation.
-
-
-
-
-
MECCO
Jackscrew
Distributor Overview
Mecco, established in 1975 in the United States, is a distributor of HVAC and ventilation equipment to businesses, and is headquartered at Jessup, Maryland. The company operates within the aerospace, fabrication, and medical industries, offering products such as laser marking machines, pin marking machines, and steam generators, as well as the sales, installation, and maintenance of HVAC and ventilation equipment. The company holds certifications such as ISO 9001:2015, UL RCM, CSA CPL, and AHRI. Its primary customer base includes countries such as the United States, Canada, Mexico, and the United Kingdom.
-
-
-
-
-
Quality Bearings & Components - QBC
Bega Jacks
Distributor Overview
Quality Bearings & Components (QBC) has been a distributor of bearings and related motion control components since 1950. The company is under the Designatronics division, headquartered in New York, USA. The company supplies various bearings, such as ball, roller, thrust, and spherical plain bearings. These components are critical in reducing friction and facilitating smooth motion in machinery and equipment. The company also has other motion components, including bushings, rod ends and linkages, linear motion products, pillow blocks and flanges, and shafting. The company serves a broad customer across various industries, including manufacturing, automotive, aerospace, agriculture, and industrial machinery.
-
-
-
-
-
Cormach S.r.l.
Cormach Jacks
Manufacturer Overview
Cormach S.r.l. is a manufacturer of automotive servicing equipment and tools founded in 1989 and based in Correggio, Italy. The company’s product lineup includes wheel balancers for controlling vibrations and preventing tire damage, wheel aligners for optimizing tire angulation with specific car makes or models, and tire changers for fast mounting or dismounting. The company’s products are mainly used in garages, tire shops, and automotive service centers. It operates internationally, with its own distribution network operating across the European Union.
-
-
-
-
-
HOLZMANN MASCHINEN GmbH
transport devices & service jacks
Manufacturer Overview
HOLZMANN MASCHINEN GmbH, founded in 1995 and headquartered in Haslach an der Mühl, Upper Austria, Austria, is a manufacturer of industrial machineries andd equipments. The company operates within the wholesale industry and has a product portfolio of over 1500 products including woodworking, metalworking, sheet metal working, welding technology, and workshop equipment. It provides an extensive range of products and machines catering to fields like construction, woodworking, gardening, power generation, and workshop operations. Its products can be purchased worldwide from its partnered online retailers, specialist retailers or DIY stores/chains.
-
-
-
-
-
CLAS EQUIPEMENTS
PNEUMATIC JACKS
Manufacturer Overview
CLAS EQUIPEMENTS, established in 1996 and based in Chignin, France, is a manufacturer of technical equipment and tools for light vehicles, commercial vehicles and heavy goods vehicles. The company offers workshop equipment like lifts, air compressors, wheel service equipment and a range of technical tools like flood lights, cleaning guns, pneumatic tools and hand tools for the automotive and heavy goods vehicle sectors. It also offers vehicle solutions for hybrid and electric cars. The company's full catalog of products and its manuals can be downloaded on the website.
-
-
-
-
-
OLMEC Srl.
JACKS & BEAD BREAKERS
Manufacturer Overview
OLMEC S.r.l., founded in 1969, is an Italian manufacturer based in Modena, Emilia-Romagna, developing pneumatic and hydraulic technology. The company offers various pumps, such as air-air, hand and foot, and pneumohydraulic pumps. Clamping cylinders with electric and pneumatic power pack units as well as jacks or bead breakers, are also part of the company’s portfolio. These products find applications across various settings, such as fixed and mobile emergency work units, laboratory testing, and environments with explosion risks.
-
-
-
-
-
MAHA Maschinenbau Haldenwang GmbH & Co.
AXLE JACK
Manufacturer Overview
MAHA Maschinenbau Haldenwang GmbH & Co. KG is a German manufacturer of vehicle testing technology products that was established in 1969 in Haldenwang, Bavaria. The company offers lifting technology products such as mobile column lifts, vehicle testing technology products such as axle load scales, and brake testing products such as brake force meters. It also offers emission and headlight testing products, along with software solutions for its portfolio items. The company’s products are commonly used by client OEM/ODMs and automotive manufacturers.
-
-
-
-
-
Airtec S.r.l.
Jacks
Manufacturer Overview
Airtec S.r.l., founded in1980 in Barco Di Bibbiano, Italy, is a manufacturer of pneumatic tools, systems, and equipment designed to assist transportation means. The product range encompasses a wide spectrum of pneumatic solutions, including impact wrenches, screwdrivers, grinding tools, and more, all designed to enhance efficiency and productivity in various industries. The tools are equipped with stability, precision, and ergonomic design, making the items ideal for applications in automotive manufacturing, aerospace, and heavy machinery industries. The company is a part of the AEG consortium, is ISO, CE certified, operates globally, and helps businesses cut down their expenses on tools.
-
-
-
-
-
Compac
Jacks
Manufacturer Overview
Compac Hydraulik A/S, founded in 1946 and headquartered in Juelsminde, Denmark, is a hydraulic automotive equipment and tools manufacturer and distributor. The company's products include transmission jacks, workshop cranes, and axle stands. It also supplies a complete line of measuring tools, moving equipment, and body part stands. The company produces metalworking machines and accessories that include bearing removal kits, press plates, and press punches, and also provides services that include repair, maintenance, and operator training programs.
-
-
-
-
-
i-Lift Equipment Ltd.
Jack and Stands
Manufacturer Overview
i-Lift Equipment Ltd is an ISO 9001-certified manufacturer and supplier of Material Handling & Lifting products used for various applications in manufacturing, logistics, packaging, and agricultural sectors with locations in China, the United States, and Europe. The company's wide range of products includes Pallet Truck & High Lift, Stacker & Work Positioner, Access Lift & Lift Table, Mobile Weighing Cart with low energy consumption and auto shut off as well as Drum Handling Equipment such as Drum Lifting & Tilting Truck and Hydraulic Drum Truck.
-
-
-
-
-
FORUM INDUSTRY S.R.L.
BOTTLE JACK
Manufacturer Overview
FORUM INDUSTRY S.R.L., established in 2003, is a manufacturer of equipment used in lifting, mooring, anchoring, and handling operations. The equipment includes chain hoists & wire rope hoists, welling slings, lashings straps, wire ropes, and lifting chains. More products are handling clamps, lifting rows, mechanical & hydraulic jacks, pulleys, and accessories such as safety latches, shackles with nuts, self-locking Clevis hooks, chain ratchet load binders, and master links. The company in Constanta, Romania, provides services such as testing of wires, chains & slings, equipment installation, wire rope terminations fighting, wire rope swaging, tapering, and splicing.
-
-
-
-
-
Chicago Pneumatic
Bottle Jacks
Manufacturer Overview
Chicago Pneumatic, founded in 1901 and now a subsidiary of Atlas Copco Group of Sweden, is a manufacturer headquartered in Rock Hill, South Carolina, specializing in industrial tools and solutions, particularly power tools and air compressors. The company offers a range of products, including cordless, electric, hydraulic, and pneumatic tools. They also provide workplace equipment and solutions, such as lift equipment, workshop cranes, workshop presses, and torque wrenches. Additionally, CP offers compressors, construction equipment, and air motor solutions. These products find applications in various industries, including vehicle service, maintenance and repair of mining, construction, and infrastructure equipment, as well as industrial production.
-
-
-
-
-
FPT Fluid Power Technology S.r.l.
Hydraulic bottle jacks
Manufacturer Overview
FPT Fluid Power Technology S.r.l., established in 1966 and headquartered in Genoa, Italy, is a manufacturer of high-pressure hydraulic equipment from 700 to 4,000 bar. The company's products include lifting, bolting, and tensioning systems. It also offers both standard and custom-made products according to customer specifications. It has the latest generation of CNC machines for turning and milling to manufacture all components that are assembled and tested. The company has a quality management system certificate ISO 9001:2008. It serves various industries such as construction, mining, oil and gas, shipbuilding, and more.
-
-
-
-
-
Shanghai AA4A
Air Jack
Manufacturer Overview
Shanghai AA4A is based in Shanghai, China, and is a custom automotive parts and components manufacturer that was established in 2008 as a subsidiary of the electric vehicle company NIO. The company manufactures a range of automotive products to customer specifications, including steering parts, chassis parts such as ball joints, and suspension parts such as shock absorbers and coil springs. The company chiefly serves clients in the automotive, motorcycle, and heavy machinery manufacturing industries.
-
-
-
-
-
OWON Technology Inc.
Bottle Jacks
Manufacturer Overview
OWON Technology Inc. established in Zhangzhou, China in 1990 is a manufacturer of mini color LCD, test and measurement equipment, and home energy management systems. Their product portfolio includes waveform generators, digital multimeters, power supplies, spectrum analyzers, and thermal imagers. The company's products are used for circuit testing, voltage measurements, real-time data visualization, frequency analysis, and component testing. The company operates in Asia, North America, Europe, South America, Oceania, and Africa.
-
-
-
-
-
Power Jacks Limited
Jacks
Manufacturer Overview
Power Jacks Limited founded in Westhill, Aberdeenshire, Scotland, UK, in 1987, is a manufacturer of electro-mechanical actuation, lifting, and positioning equipment. Products offered by the company are screw jacks, electric linear actuators, bevel gearboxes, lead screws, and jacking systems. The company also provides customized products. Its planetary roller screws convert rotary motion to linear motion using threaded spindles that provide huge load capacity and precise positioning. The company’s products are used in industrial automation, defense, energy, transport, and civil engineering industry sectors.
-
-
-
-
-
Hydraulic & Pneumatic Products
Jack
Manufacturer Overview
Hydraulic & Pneumatic Products was founded in 2013 and is headquartered in New Delhi, India, as a manufacturer of an extensive range of Hydraulic Cylinders, Hydraulic Power Packs, Hydraulic Jacks, Pneumatic Cylinders, and many others. The skilled personnel adheres to business standards and regulations, utilizing state-of-the-art equipment and machinery. The items manufactured by the company are broadly esteemed for their unique durability, robust construction, and optimal functionality. Furthermore, these goods find application in various heavy industries.
-
-
-
-
-
SPX Flow
BOTTLE JACKS
Manufacturer Overview
SPX Flow, established in 1912, is a manufacturer of industrial machinery to solve processing challenges based in Charlotte, North Carolina. The company manufactures various machinery such as mixers, pumps, valves, homogenizers, and heat exchangers. The machinery is used in nutrition, health, mining, construction, and chemical industries. The company provides services such as designing, engineering, and installing turnkey process units or full-scale plants. The SPX Flow brands include Anhydro, Bran+Luebbe, Gerstenberg Schrӧder, Pneumatic Products and Seital Separation.
-
-
-
-
-
ENERPAC
Jacks
Manufacturer Overview
Enerpac, since 1910, has been a manufacturer of advanced industrial tools and a service provider located in MenomoneeFalls, Wisconsin, USA. The company produces power units, machine moving tools, pipe blenders, tension meters, and load cells. It also created cutters, gantries, presses, cylinders, and strand jacks used in aerospace, bridges, automotive, mining, and power generation industries. The firm offers rental products, training, hydraulic education, and services such as bolting, tool crib inspection, and calibration. It has 8 manufacturing facilities in The Netherlands, USA, Spain, UK, China, and India.
-
-
-
-
-
Peddinghaus
STEEL JACKS
Company Overview
Peddinghaus, founded in 1839 and headquartered in Schwelm, Germany, is a well-established manufacturer and distributor of quality hand tools designed for a wide range of professions and applications. The company offers an extensive product portfolio that includes an array of hand tools, including bolt cutters, Allen wrenches, woodworking tools, forging tools, non-sparking tools, and more. These hand tools find applications in various industries, including chemical industries, aerospace, construction machinery, joinery, and carpentry, as well as for general use in households.
-
-
-
-
-
Werther International S.p.A.
J2 – J3
Company Overview
Werther International S.p.A., established in 1971 and based in Reggio Emilia (RE), Italy, is a manufacturer and supplier of automotive service equipment and air compressors. The company's product portfolio includes wheel aligners, single-post lifts, and headlight beam testers. These products are utilized in various applications, including railway maintenance, auto manufacturing, and automotive repair and maintenance. The company also provides services, including technical support and product catalogs. With operational units and distributors in nearly 150 countries, some of the countries include the United States, Poland, and France.
-
-
-
-
-
Masko Engineering
Hydraulic Jacks
Company Overview
Masko Engineering founded in Rajkot, Gujrat, India, in 1968, is a manufacturer and supplier of hydraulic equipment. The company offers products including hydraulic jacks, hydraulic cylinders, bearings, hydraulic hose pipes, and hydraulic assemblies. It manufactures hydraulic cylinders with cold-drawn seamless tubes, pressure-resistant oil seals, and nuts made of steel that have tensile and sheer strength. Its products serve the industries of automotive, industrial lifting, construction, and agriculture. The company also provides replacement parts.
-
-
-
-
-
S.m.a. Kapadia & Co .
Jack
Company Overview
S.m.a. Kapadia & Co . founded in Chennai, Tamil Nadu, India, in 1960, is a manufacturer and distributor of hydraulic products. It offers products including hydraulic bottle jacks, hydraulic integral pullers, one-way power packs, hydraulic hand pumps, and single plungers. The company’s hydrolift hydraulic cable crimping tool is used to compress connectors, lugs, or sleeves onto the ends of cables or wires. The company has partnered with Vanjax, Bipico, and Tepco. It checks products from other manufacturers before delivering them to customers at its testing facilities.
-
-
-
-
-
-
-
-
-
-
Montabert
Pneumatic equipment
-
-
-
-
-
Orplex Limited
GT Hydraulic Bottle Jack
-
-
-
-
-
Dino Paoli Srl
DPLIFT JACKS
-
-
-
-
-
Zhongshan Hairuida Auto Maintenance Equipment Technology CO.,LTD
BA-66
-
-
-
-
-
Princess Auto Ltd.
Jacks
Company Overview
Princess Auto Ltd., founded in 1933 and based in Winnipeg, Canada, is a supplier of an assortment of tools and equipment with over 50 stores across Canada. In 1977, it opened its first store in Edmonton, Alberta, and became a retailer. The company serves several workers, including inventors, farmers, and tradespeople and stocks products such as outdoor power equipment, hand tools, and hydraulics. It sells items from several brands, such as Dealer’s Choice, Braber Equipment, and King Canada, and it also has a foundation that provides financial assistance to trades students enrolled at Canadian colleges.
-
-
-
-
-
Weber UK Ltd
TRANSMISSION JACKS
-
-
-
-
-
Bulldog Products
Trailer Jacks
-
-
-
-
-
Holmatro, Inc
JACKS
Distributor Overview
Holmatro, Inc., founded in the Netherlands in 1967, is a global supplier of high-pressure hydraulic rescue tools. The company has manufacturing facilities in the United States and the Netherlands. It serves customers worldwide, with divisions located in the Netherlands, USA, and China. Its products are predominantly used in rescue, special tactics, and industrial applications, ensuring effective and safe tools under all circumstances. It has centralized its research & development and product management teams in the Netherlands to ensure superior products. Its state-of-the-art manufacturing facilities are located in the Netherlands and in the USA.
-
-
-
-
-
Murphy Industrial Products, Inc.
Bottle Jacks / Hydraulic Jacks
Distributor Overview
Murphy Industrial Products, Inc. is a wholesale supplier of tie down, hauling, and lifting equipment that was established in Houston, Texas, USA, in 1968. The company offers cable or wire rope, block and pulley sets, and beam clamps for suspending or securing fixtures. It also offers load binders, lifting straps, and tie down chains for securing cargo onto heavy duty vehicles. The company’s products are used mainly by clients in the construction, transportation, and oil and gas industries.
-
-
-
-
-
Utility Parts Central
Auger Slings and Ropes
Company Overview
Utility Parts Central Inc. is a supplier of utility equipment and related parts that was established in 2005 in Richmond Hill, Ontario, Canada. The company stocks items from a range of international brands including Terex Utilities, Altec, and Versalift. These products include crane parts, digger derrick components, and auger drill components. It also offers accessories, such as tool trays, tool holders, and digger attachment adaptors. The company mainly serves clients in the construction, machine tools, and telecommunication industries.
-
-
Jack Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | G&G Manufacturing Co. |
11.5%
|
| 2 | Mile-X Equipment, Inc. |
6.3%
|
| 3 | Atlanta Drive Systems |
6.3%
|
| 4 | CURT Manufacturing LLC |
5.2%
|
| 5 | NOOK INDUSTRIES, INC |
5.2%
|
| 6 | Carr Lane Manufacturing |
5.2%
|
| 7 | Columbus McKinnon Corporation |
4.2%
|
| 8 | Masko Engineering |
4.2%
|
| 9 | Gray Manufacturing Company, Inc. |
4.2%
|
| 10 | RMI Laser |
4.2%
|
Derivation Method
The ranking is calculated based on the click share within the jack page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- SPX Flow: 4,500
Newly Established Company
- Shanghai AA4A: 1995 (29 years ago)
- Valworx, Inc.: 1991 (33 years ago)
- OWON Technology Inc.: 1990 (34 years ago)
Company with a History
- Peddinghaus: 1839 (185 years ago)
- Joyce/Dayton Corp.: 1873 (151 years ago)
- HOLZMANN MASCHINEN GmbH: 1886 (138 years ago)
Jack Manufacturers in United States
*Including some distributors, etc.
- JPW Industries, Inc.
- Columbus McKinnon Corporation
- RMI Laser
- Carr Lane Manufacturing
- NOOK INDUSTRIES, INC
- Mile-X Equipment, Inc.
- D.L. Martin Co.
- Macton Corporation
- G&G Manufacturing Co.
- DEPRAG USA
- Venture Mfg. Co.
- Atlanta Drive Systems
- Joyce/Dayton Corp.
- CURT Manufacturing LLC
- Premier Manufacturing
- Gray Manufacturing Company, Inc.
- Valworx, Inc.
- MECCO
- Quality Bearings & Components - QBC
Global Distribution of Jack Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
19 | 46.3% |
Italy
|
6 | 14.6% |
India
|
4 | 9.8% |
China
|
3 | 7.3% |
Germany
|
2 | 4.9% |
Austria
|
1 | 2.4% |
France
|
1 | 2.4% |
Denmark
|
1 | 2.4% |
| Romania | 1 | 2.4% |
United Kingdom
|
1 | 2.4% |
Turkey
|
1 | 2.4% |
Canada
|
1 | 2.4% |
