This section provides an overview for globe valves as well as their applications and principles. Also, please take a look at the list of 132 globe valve manufacturers and their company rankings. Here are the top-ranked globe valve companies as of December, 2024: 1.DFT Inc., 2.Sterlco, 3.CWT Valve Industries Inc..
Table of Contents
1985-2014: Worked for Alstom Corporation, ABB Corporation, and Gadelius Corporation, designing Jungstrom air preheaters and mechanical design of diamond soot blowers. (ABB Corporation: https://new.abb.com/jp)
2014-2021: Worked as an engineering and project manager at Alvos Inc.
https://www.linkedin.com/in/yoichi-hiroki-92192394/
A globe valve is a valve used in process piping.
Globe valves are used to fully open and close the flow path and to adjust the flow rate and pressure. Originally, process piping refers to piping used to transport process fluids such as chemical products. Because special care is required in some cases, it is distinguished from piping used to convey working fluids such as fluid machinery.
A globe valve is characterized by a rounded valve box (body) section and a curved internal flow path. Since the valve box is ball-shaped, it is also called a ball valve or globe valve.
Figure 1. Structure of globe valve
Globe valves are excellent for shutting off fluids and regulating flow and pressure, so they are used as stop valves when you want to shut off fluids without leakage. However, due to their high pressure drop, gate valves, ball valves, and butterfly valves with low pressure drop may be used for "always open" applications.
Globe valves are used in utility-related water, steam, and air piping in factories and power plants in general industry, and are often used in facilities and equipment where pipes are laid. It is also used in piping around water meters, gas meters, and water heaters in homes.
Because they are suitable for many applications, including high temperature, high pressure, and large-diameter use, they are used in a very wide range of applications. However, needle valves are best suited for use in small-diameter piping for minute flow rate control. The valve plug is tapered and needle-shaped, making it possible to adjust a minute amount of flow. The basic structure of the needle valve is the same as that of a globe valve, as it is opened and closed by moving the needle valve up and down.
The valve plug (disc) in the valve housing (body) of a globe valve is rotated and moved up and down by a handle or actuator (drive unit) attached to the valve stem (stem). This causes the plug to contact the seat (valve seat) and shut off the fluid.
The distance between the valve plug and the valve seat changes to the extent that the handle or actuator is rotated, and the cross-sectional area of the flow path changes, making it possible to adjust flow and pressure. This type of valve is used to adjust the volume of utilities such as steam, cooling water, hot water, compressed air, and vacuum lines that require flow and pressure adjustment.
The valve box is ball-shaped, and the flow path from the inlet, through the valve seat, to the outlet is S-shaped. Inside the valve, the flow direction is changed and the flow path rapidly expands and contracts, resulting in a very large pressure drop.
However, when the valve is closed, the valve plug is pressed against the seat from above, resulting in low leakage and high shutoff performance. In addition, the valve plug position can be finely adjusted, allowing fine control of the flow rate.
Globe valves can be opened and closed manually or automatically.
Manual Operation Type
In the manual operation type, the valve is opened and closed by rotating the round handle and moving the valve stem up and down.
Automatic Operation Type
Figure 2. Self-operated globe valve
For self-operated valves, there are two types of actuators (drive units): electrically actuated and pneumatically actuated. Electric actuators use a combination of an electric motor (motor) and reduction gear to move the valve stem up and down to open and close the valve.
On the other hand, the pneumatic actuated type uses compressed air injected into the air cylinder to move the cylinder and valve stem up and down to open and close the valve.
Figure 3. Comparison of valve features
Ball Valve
Ball valves can adjust the flow rate when used in the intermediate opening position. However, when used at the middle opening position, fluid can accumulate between the valve seat (ball seat) and the ball, causing leakage and possible damage to the valve seat.
Therefore, ball valves should be used in fully open and fully closed applications. In particular, ball valves can be easily operated fully open or fully closed by simply turning the handle. However, some manufacturers sell ball valves that can be used in intermediate opening positions.
In general, globe valves are used when both shutoff and flow control functions are required, while ball valves are used when shutoff is the main purpose and full opening and closing can be easily accomplished.
Gate Valves
Gate valves can be used in the middle opening position, but the valve plug may vibrate, so they should be used in the fully open or fully closed position. As with ball valves, globe valves are generally used when both shutoff and flow control functions are required, and gate valves are used when shutoff is the main purpose and full opening and closing can be easily accomplished.
Butterfly Valves
Butterfly valves can adjust the flow rate when used at an intermediate opening position. Butterfly valves have a smaller pressure drop than globe valves, but their disadvantage is that they are prone to unbalanced torque and water hammer due to the plate-shaped valve plug.
Butterfly valves have a smaller valve box and shorter face-to-face dimensions (distance between fluid inlet and outlet), and they have superior shutoff performance. In general, globe valves are used when both shutoff and flow control functions are required and full open/close time can be afforded, while butterfly valves are used when full open/close time is required in a short period and the face-to-face distance is short.
Figure 4. Structure of each valve type
The advantages and disadvantages of globe valves can be briefly summarized as follows.
Advantages
Disadvantages
*Including some distributors, etc.
Sort by Features
Sort by Area
DFT Inc., formerly known as Durabla Fluid Technology, is a manufacturer and provider of in-line check valves and severe service control valves founded in 1948. The company started by developing the Basic-Check valve for a customer needing a small metal-seated check valve with tight shut-off capabilities. With a rich history spanning over 70 years, DFT is Thomas Verified and a World Trade Center Member Company. They are ISO 9001:2015, 3-A, MSS, API 6D, CE, and PED Module H certified. It caters to the specific requirements of industries, including building maintenance, chemical processing, power generation, and more.
Celeros Flow Technology is based in North Carolina, USA, and is a manufacturer of flow control technology products that was established in 2020 as a spin-off company from the SPX Flow Group. The company markets its products under several brands, including M&J Valve, GD Engineering, and ClydeUnion Pumps. Its product lineup includes filtration systems such as coalescers, valves such as butterfly valve models, and pumps such as reciprocating pump models. The company’s products are used by clients in the oil and gas, power generation, and chemical processing industries.
Sterlco, established in 1916 and headquartered in Wisconsin, USA, is a manufacturer of steam and hot water systems. The company’s products include condensate, boiler feed, and temperature control valves. It offers various standard products and custom engineering solutions tailored to specific applications. Its steam control products are crafted to ensure efficient operation and system integrity, whether for sterilization, precise temperature control, or power generation. The company’s products are used in plastics, food and beverage, and pharmaceutical industries.
Roll Seal Valve Co., Inc., established in 1936, is headquartered in Costa Mesa, California, USA, and is a manufacturer specializing in the production of valves and control systems. The company's product range includes butterfly valves, pressure-reducing valves, and other fluid control solutions engineered for reliability in waterworks, oil and gas, and chemical processing industries. It has received awards like the Fluid Control Pioneer Award in 2015 and Industry Innovation Recognition in 2019. Additionally, the company holds ISO 9001 certification for quality management.
Harwood Engineering Co., Inc. is a developer and manufacturer of pressure systems and related components established in 1947 and headquartered in Walpole, Massachusetts, USA. The company offers pressure transducers and vessels for measurement or containment applications, hydraulic intensifiers for generating pressure in process gasses or liquids. It also offers pressure calibration equipment for ensuring accurate pressure measurement and operation of its portfolio products. The company’s products are mainly used by clients in the chemical, petroleum, and energy industries.
Barksdale, established in 1949 and headquartered in Reichelsheim, Germany, is a manufacturer of industrial control and regulator products. The comprehensive product line includes pressure, transducers, switches, temperature, level, and flow controls that offer precise monitoring, efficient regulation, and enhanced operational safety. These products find application in industries such as oil and gas, manufacturing, energy, and transportation. The company's accurate monitoring instruments optimize processes, guarantee operational efficiency, and maintain safety standards, all of which add to the smooth running of complex industrial systems.
Check All Valve Manufacturing Co. (CAVM) is a manufacturer and supplier of check valves founded in 1958 and based in Des Moines, Iowa. The company produces check valves with various connector types including flange, welded, and threaded units for use in oil and gas, food and beverages, water treatment, and chemical processing. Among the company's extensive product lineup are inline check valves designed to reduce pressure loss, spring check valves that can function optimally in all orientations, and poppet check valves engineered for intensive applications. CAVM also provides services for clients like technical support, custom design, and prototyping.
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
Plast-O-Matic was formed in 1967 in New Jersey, now situated in Cedar Grove, New Jersey. Plast-O-Matic serves aquarium, chemical dosing, chemical processing, metal finishing, semiconductor, wastewater treatment, water purification, and government application industries. Product offerings include product data sheets, CAD downloads, installation & maintenance instructions, ball valves, check valves, gauge guards, pressure regulators, process cooling sticks, anti-siphon valves, shut-off and diverter valves, sight glass & level indicators, solenoid valves, venting valves, other process controls & pumps, and custom valves.
Trimteck is a manufacturer of temperature, pressure, and flow control valves established in 2004 and located in Coral Springs, Florida, USA. The company’s product lineup includes its OpTB series V-notch ball trunnion mounted control valves, its OpGL series globe control valves, and its XT series custom designed valves. It also offers its Severe Service (ST) series noise abatement valve trims, stacked disc valve trims, and multistage trim anti-cavitation cartridges. The company’s products are primarily used in the power generation, chemical, and oil and gas industries.
Jordan Valve Company, a division of Richards Industrials founded in 1948 with headquarters in the USA, is a manufacturer of industrial regulators and control valves. The company's extensive product line includes pressure regulators, back pressure regulators, wafer-style control valves, JCVS industrial control valves, and valve positioners. It also provides an extensive range of accessories, including panel-mounted loading stations, pressure and temperature controllers, diaphragm actuators, and rotary actuators. Its products are used for various steam control systems that include food processing, steam tracing for pipe protection, steam control for sterilization processing, and tire curing processes, among many others.
Flomatic(R) Corporation, founded in Glens Falls, NY, in 1933 is a manufacturer of valves for the water and wastewater industry. The company's product portfolio includes Backflow Preventers, Break Off Plugs, Butterfly Valves, Check Valves and Constant Pressure Pump Control Valves. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also offers services including test and measuring the coating thickness of fusion bonded epoxy coat paint systems to ensure superior abrasion and corrosion resistance for longevity and verification organizations and labs to ensure safety.
CRANE ChemPharma & Energy, a company based in Woodlands, Texas, is a manufacturer of process control instrumentation, valves, and analytical instruments for chemicals and refining products. The company is a part of Crane Co.’s Process Flow Technologies segment. It sells process valves, actuators, sensors, and pumps. Its products are designed to meet the needs of chemicals, industrial, mining, and other industries. It operates under a quality management system certified with ISO 9001.
Rays Flow Control, established in 2015 with manufacturing facilities in China and operations in the USA and Venezuela, is a manufacturer of industrial valves and equipment. The company's product line includes cryogenic ball valves, parallel slide gate valves, pig valves, through-conduit expanding gate valves, and plug valves, and it serves large projects in the mining, shipping, power generation, water distribution, and chemical processing industries. The company also provides a wide range of services that include equipment consulting, commissioning, training, and the supply of tools to manage its installed machinery and systems.
Warren Valve, established in 2000, is headquartered in New Jersey, USA, and operates as a manufacturer and supplier specializing in industrial valves. Their primary attention includes producing a range of valves such as gate, globe, check, and ball valves, catering to various industries like oil and gas, petrochemicals, and power generation. Warren Valve's dependable and durable valves play a vital role in regulating fluid flow and ensuring operational safety in critical systems. With a pledge to quality and performance, Warren Valve subsidizes significantly to fluid control and management solutions.
Fetterolf Corporation, established in 1969, based in Skippack, Pennsylvania, US, the manufacturer and supplier of valves and sealing solutions. The company's main products include industrial valves, such as ball valves, gate valves, and check valves, designed for applications in various industries, including oil and gas, petrochemical, and power generation. Fetterolf Corporation’s valve technology and sealing solutions that ensure efficient and reliability operation in critical environments. With a strong quality and customer satisfaction, the company offers technical support, customized services, and expertise to meet the diverse needs of its clients.
Badger Meter, Inc. was founded in 1905 and based in Milwaukee, Wisconsin. Badger Meter is a manufacturer and marketer of flow measurement, quality, control, and communication solutions in the United States and globally. Badger Meter serves several industries including water treatment, water distribution, aviation, concrete production. Badger Meter offers utility water solutions and commercial & industrial solutions product segments. Together they include products such as meters, software, diagnostics, and quality monitoring.
NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.
Bonny Forge was originally founded in 1876 and is based in Mount Union, Pennsylvania. The company isis a manufacturer of fittings, valves, and other products used in petrochemical, refining, power, energy, and industrial piping markets. The company’s five product lines are Forged Steel Fittings and Unions, Forged Steel Branch Connections, Forged Steel Valves, Cast Steel Valves, and Forged Ball Valves. The company uses CAD to allow customers to customize desired specifications of machines, such as valve size, Cv coefficient, and material.
Conval, established in 1967, and headquartered in Enfield, Connecticut, is a manufacturer that specializes in industrial valves. Their product range includes ball valves, gate valves, globe valves, and check valves which these products find applications in industries such as nuclear power, water treatment, agriculture, and hydraulic systems. Conval's valves are designed to handle high temperatures, pressures, and corrosive environments, ensuring safe and efficient flow control. The company holds certifications such as ISO 9001, demonstrating their adherence to quality and meeting industry standards. Their valves are crucial for process control and safety in various industrial applications.
Established in 1951, KITZ Corporation of America is a manufacturer that specializes in producing and supplying industrial valves and controls for various industries such as oil and gas, chemical, power generation, and water treatment based in Stafford, Texas. KITZ provides various types of valves such as ball, gate, globe, check, and butterfly valves along with control valves and actuators. Their products are designed to control the flow of liquids and gases. With branch offices and subsidiaries in the United States, Germany, Brazil, Japan, and many locations throughout Asia, Kitz is able to serve customers globally.
Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.
ASC Engineered Solutions is based in Waynesboro, Pennsylvania. ASC serves the mechanical & plumbing systems, commercial & residential, mining, food & beverage, industrial, fire protection, oil & gas, energy & power, and water & wastewater industries as a procure and repair servicer. ASC is ISO 9001:2015 certified. A sample of ASC’s offerings include fire protection & fabrication products such as fabrication equipment and seismic bracing, flow control such as commercial& residential valves, performance products such as engineered pipe supports & snubbers, pipe joint systems such s grooved and high pressure fittings, as well as press products and support systems.
ARI Valve Corporation is based in Marietta, Georgia, and is the manufacturer of valves and related parts for fluid, liquid, gas, and vapor handling processes used in the global automobile, shipping, chemical, food processing, and heating industries. The company has a wide range of valves available including bellows seal valves, control valves, and strainers/check valves. Additional product lines include steam traps, actuators, and manifolds. Customers needing a specific valve not among the hundreds available are encouraged to contact the company for more information.
Linde Hydraulics Corporation, established in 1970 and based in Canfield, Ohio, is an ISO 9001 certified manufacturer and supplier of modular drive systems and is a subsidiary of Linde AG, Germany. Its product portfolio consists of motors, valves, and pumps, and it serves several industries, including agriculture, forestry, and mining. It is part of the Weichai family and it also provides electronic control units, sensors, and accompanying software. The company provides several services, which include commissioning, product remanufacturing, and aftermarket support. It also services and sells original spare parts like cylinder blocks, drive shafts, and swash plates.
Singer Valve Inc., founded in 1957, is a manufacturer and distributor of control valves and related solutions in Tennessee, USA. The company manufactures products that help regulate and control water flow and other fluids in various applications. The company provides multiple solutions, including control valves, pressure-reducing valves, surge control valves, and altitude valves. These valves control fluid flow, pressure, and level in pipelines and water distribution systems. The company serves diverse industries, including municipal water utilities, wastewater management, industrial processes, and irrigation.
Orange Research Inc. is a manufacturer and supplier of high-precision fluid measurement and control instrumentation. The company was established in 1963 and is based in Milford, United States. The company product range includes Differential pressure flow meters, flow switches, and mini-transmitters. The company equipment used in various industries such as aerospace, industrial, pharmaceutical, and more. The company offers customer support services which encompass technical assistance, troubleshooting, installation guidance, and maintenance support.
Clark Solutions, established in 1962 and headquartered in Massachusetts, United States, is a supplier and distributor of fluid handling products. The company offers a wide range of products, including pumps, valves, and instruments, among others, serving industries such as chemical processing, pharmaceuticals, and food and beverage. These industries rely on the company's solutions for precise fluid control in tasks like transferring, mixing, and flow control, ensuring the accuracy and efficiency of operations.
Curtiss-Wright Valve Group, established in 1929 and headquartered in Charlotte, North Carolina, is a manufacturer and supplier of valves and control systems for various markets. The company's product range comprises pressure relief valves, control valves, actuators, pumps, and systems integration, serving industries including power, oil and gas, aerospace, industrial, and defense. It also offers comprehensive services ranging from engineering and design to testing and certification, and installation, as well as maintenance and repair. Devoted to delivering quality solutions, it aims at customer satisfaction and continuous creativity. Holding ISO 9001:2015 certification, the company upholds international quality standards.
Western States Hardware was founded in La Puente, California in 1968. Western States Hardware serves customers across the United States, offering products in a number of categories including: nuts, screws, & bolts, metric nuts, screws, & bolts, drills & cutting tools, saw blades, electrical connectors, pipe nipples, & pipe fittings, industrial brushes, parker brass fittings & valves, anchors, abrasive pads, belts, & discs, chain & rigging accessories, various tools, valves, staple & nail guns, power & insert bits, and hoses, tubing, & clamps. Altogether, Western States Hardware offers over 750,000 products available.
Ray Murray, Inc. (RMI) was founded in 1973 and is a distributor of propane gas equipment appliances in the United States. Product categories include propane, compressed gas, hearth appliances, HVAC & heating, and outdoor living. The company’s catalog includes regulators, piping, cylinder valves, bulk plant & truck equipment, service tools, and outdoor living & heating products. The company offers additional customer resources such as product and tool installation, repair, and various customer services.
Seal Fast, Inc. was founded in 1933 and is headquartered in Houston, Texas. Seal Fast is a distributor of sealing and fitting products. Seal Fast product categories include couplings, fire protection, gauges, pipe fittings and valves, hose and hose protection, and sheet rubber. Couplings include cam and groove, dry disconnect, shank, ring lock, foot valves, brass fittings, hydraulics, clamps, and banjo couplings. Fire protection equipment also includes gaskets, and industrial ground monitors. Gauges include siphons, oxygen, and thermowells. Pipe fittings and valves include combination nipples and flanges. Hose and hose protection include Fire hoses and industrial rubber. Sheet rubber includes skirt board and cloth insert neoprene.
RWV was founded in 1971 as a joint venture between Mitsui & Company, Ltd. and Toyo Valve Company, Ltd. of Japan as Red White Valve Corp. In 2003, the company joined Valvoindustria Ing. Rizzio of Italy and today is headquartered in Lake Forest, California. The company is an ISO 9001:2015 and 14001:2015 certified manufacturer of valves for various industries, sold through stocking and non-stocking distributors. The company’s valve products by category include lead-free, hydronic, standard, and commercial & industrial valves. The company’s products by type include balancing, ball, butterfly plumbing, and radiator valves.
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
Valworx is a leading supplier of actuated valves and accessories. Valworx can provide you with Stainless, brass, PVC, sanitary ball and butterfly valves. Electric, pneumatic and manual actuation.
Ohio Pipe, Valves, & Fittings, Inc. was founded in 1929 as Ohio Pipe Bending & Coiling Company. Also known as the Ohio Pipe companies, they specialize in fully welded, seamless, stainless steel, and PVC pipes of many sizes. Ohio Pipe companies also sell flanges, couplings, ball, butterfly, gate, control, and relief valves, with thousands of unique items in stock. Ohio Pipe companies’ past and current customers include power plants, steel mills, oil and gas companies, chemical plants, water and wastewater facilities, as well as many OEMs.
Automated Valve & Equipment Co. (AVE) was established in 1959 and operates out of Cleveland, Ohio. AVE is a distributor of valves and related products with the ability to provide custom specialty brackets, extension stems, and valve modifications. The valve automation segment features pneumatic control valves, electric control valves, modulating control valves, valve control devices, and remote valve operators. Industrial valves include ball, butterfly, & knife gate valves, gate, globe, & check valves, and control valves & regulators. Specialty valves and Pipe strainers are also available.
Circle Valve was founded in 1986 and headquartered in Harleysville, Pennsylvania. Circle Valve is a value-added distributor and manufacture rep of industrial valves, fittings, filters, and measurement control devices for a variety of industries and applications. Among Circle Valve’s product listings are check valves, relief valves, vacuum & high purity fittings, circle seal solenoid valves, Jefferson solenoid valves, Atkomatic solenoid valves GO regulators, cryogenic valves & equipment, hoke valves, Gyrolok Tube Fittings, Circle Seal Control Valves, and various measurement devices.
Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.
Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.
World Wide Metric was founded in 1970 and is based in Branchburg, New Jersey. World Wide Metric is a distributor of products for the global maritime & industrial flow control and fluid power markets. World Wide Metric products include valves in DIN, JIS, and ANSI standards, fittings such as hydraulic, JIC flared, ORFS, and BSP adapters, flanges, tubing, coupling, expansion joints, tube clamps, gaskets, marine firestop, RM pressfit & drain, and other industrial products.
Mival S.r.l., established in 1967 and based in Italy, is a manufacturer of industrial valves. The company is highly specialised in bellow valves. The company's products are built according to EN and ANSI regulations. It’s goods are used in sectors like steam and diathermic oil, chemical, pharmaceutical, petrochemical, and food boiler systems. Due to the company's concern for the environment, a 172-kW solar system has been built on the factory roof. The company specialised in making sediment collection strainers, gate valves, joints, butterfly and ball valves, and valves for drinking water. It holds ISO 9001:2008 certification.
ShuF, founded in 1911 and headquartered in Eppstein, Germany, is a manufacturer of process critical valves. The company's range of valves includes automatic recirculation valve, control valve, and blow-down valve. These valves are used in applications like coal liquefaction and gasification, polymer production, and pharmaceutical applications. It has a worldwide network of representatives that offer services in more than 65 countries. The company is ISO 9001 certified, and its products meet with the ISO 10497 requirements of fire type-testing.
Shaanxi Aerospace Power High Technology Co. Ltd. is based in Xi’an City, China, and is a manufacturer of aerospace power equipment established in 1999 as a subsidiary of China Aerospace Science and Technology Corporation (CASC). The company produces various gas and flow meters, torque converters, and specialized tanks. These include crystallizers, industrial vehicle torque converters, and hydraulic turbines. It also offers reactor vessels and filter presses, which are mainly used in the oil and gas, energy generation, and military sectors.
Bell S.r.l. is a manufacturer of hydraulic pumps, air-hydraulic boosters and electric power units that was established in Lombardy, Italy, in 1985. The company primarily produces air-hydraulic boosters for high-pressure or flow rate applications, and hydraulic pumps for manual, pneumatic, or electric applications up to 1,000 bar. It also offers filtering systems, electro-integrated cylinders for linear motion control, and custom engineering services. The company’s products are used mainly by clients in the marine and offshore industries, with additional applications in mining and industrial processing.
Henry Group Industries, established in 1914 and based in Harbour City, Tsim Sha Tsui, Hongkong is a manufacturer of components for the commercial refrigeration and air conditioning industry. The company is international, with operations in Australia, China, Germany, the United Kingdom, and the United States. The company's products include automatic controls, fan motors, filters and dryers, heat exchangers, and safety devices. Its pressure vessels meet CE, UL/ASME, AS1210, and TSG codes. The goods of the company are fully compliant with ISO 5149 certification. Each component has a unique QR code for identification.
Goetze KG, based in Fort Mill, USA, is a manufacturer of all kinds of valves and fittings. The company manufactures valves for all kinds of applications, including industrial, cryogenic and hygienic applications. The range of valves include safety valves, pressure relief valves and shut-off valves. These valves offer a pressure range from 50 to 1500 bar, and are used from -270°C to +400°C temperature. With custom-fit production, it provides solutions for individual requirements. The company complies with the ISO 9001 and 14001 standards of quality and environmental management.
Zhejiang Jieyu Valve Co. Ltd., founded in 2002 and headquartered in Wenzhou, China, is a manufacturer and supplier of industrial valves and related equipment. The company offers over 70 categories of products that include gate valves, straight globe valves, and strainers. These products are used for industrial plants, such as food processing, chemical processing, and pharmaceutical production. It serves a diverse range of industries that include power generation, shipbuilding, and environmental protection, with annual sales from exports of over $30 million per year.
KTN, or Kara Technology News, founded in 2003 and based in Madrid, Spain, is a manufacturer of valves and instrumentation. Its product range includes various valve types like ball, butterfly, gate, globe, and control valves, each designed to meet diverse requirements for temperature and pressure resistance. It also offers a wide array of instrumentation devices for temperature and pressure measurement, along with automation products including limit switch boxes, and pneumatic actuators. The company complements its offerings with accessories like filters, compensators, sight glasses, and safety guards for a complete solution in the field of fluid control and measurement.
KSB SE & Co. KGaA is a Frankethal (Pfalz), Germany-based manufacturer and supplier of pumps, valves, valve actuators, and valve & pump automation equipment since 1871. Its valve product portfolio is composed of globe valves, control valves, diaphragm valves, swing check valves, and lift check valves with a diameter of 15-4000 millimeters and a nominal pressure of PN 6-500. They offer various types of pumps including ring-section, dry-installed, barrel pull-out, vertical shaft submersible, and submersible motor & borehole pumps. The company offers products used in various applications including chemical production, water technology, mining, building services, oil & gas technology, and water technology.
Elettromeccanica Delta S.p.A. is an Italian ISO 9001 certified manufacturer of safety and control products for combustion equipment founded in 1961 and based in Arcade, Treviso. The company's product portfolio includes burner control units for gas firing appliances, proportional flow control valves, solenoid actuators for control valves, air-to-gas ratio controllers, and gear pumps for oil burners. It also offers design and engineering services for customers with unique project parameters. The company's products are primarily used by client boiler and furnace installation companies, HVAC manufacturers, power generation facilities, and waste incineration plants.
ARAKO spol. s r.o, a company established in 1953 and based in Opava, Czech Republic, is a manufacturer and supplier of valves. The company's range of products includes valves for nuclear energetics, swing check valves, and blowdown valves. These products are used in various industries, including nuclear power generation, chemical processing, and water treatment and distribution. The company is ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certified, with sales and distribution partners in various countries including Russia, Vietnam, and Bulgaria.
IMI Critical Engineering is a manufacturer of flow control systems and valve solutions established in 1862 and based in Birmingham, United Kingdom. It manufactures high and medium-pressure valves, such as pressurizer safety, compressor, turbine bypass, chemical, and steam valves. Its products are utilized in oil and gas, marine, petrochemicals, sanitary, and life sciences sectors across Sweden, Germany, Austria, China, and the USA. Its manufactured products are ISO 9001:2000 certified and adhere to the standards of OSHA and European Pressure Ratings. The company is part of IMI plc, an engineering company in England, and has received the Global Supplier Awards in 2022.
Beijing Valve General Factory Co., Ltd., established in 1952 and headquartered in Beijing, China, is a manufacturer that produces various types of valves. The company's product line includes ball valve, gate valve, globe valve, check valve, and butterfly valve. It also offers a cryogenic valve, a forged steel valve, a water system valve, and an actuated valve. Its product has a fire-safe and anti-static design. The company has achieved ISO9001, API6D, API6A, and API607 certification. It serves various industries, including petroleum, chemical, metallurgy, electricity, and infrastructure construction.
FARBO S.R.L., established in 1975 and based in Cimarosa, Italy, is a manufacturer of pneumatic parts for the automation sector. The company uses the newest CNC machine tools for production, and each step of the process is monitored and controlled by an internal quality system. It produces pneumatic cylinders, short stroke cylinders, rotary actuators, rotating joints, solenoid valves, angle seat valves, and accessories. The ISO 15552 FARBO pneumatic cylinders are manufactured exclusively using CNC machines and numerical control. The company has a certified quality system (DIN EN ISO 9001:2015).
VAG GmbH, founded in 1872 with headquarters in Germany, is a manufacturer of valves for infrastructure projects. The company's products include butterfly valves, house connection valves, gate valves, control valves with own-medium control for the regulation of pressure and flow rates in service areas, and electric check pump control valves. The company serves infrastructure projects such as water treatment and distribution, wastewater management, dams, and power stations. Services offered include commissioning, training, maintenance, on-site service, and the supply of original spare parts.
VÁLVULAS VS, S.L., has been in operation in three decades and is headquartered in Muskiz, Spain, is a manufacturer of stainless steel and alloy valves. The company offers a wide range of products, including DIN valves, ANSI valves, and bottom drain valves. It also provides filters, sight glasses, accessories, and materials. Its products are used in tanks and vessels to drain liquids from the bottom of the tank. The company is certified ISO 9001/2000 by Lloyd's Register for its quality standards. It serves the chemical and petrochemical industries.
Siemens began in 1847 and is headquartered in Munich, Germany. Siemens focuses in automation and digitalization technology and operates globally. Siemens’s 5 operating segments are digital industries, smart infrastructure, mobility, Siemens Healthineers, and Siemens Financial Services. Siemens Financial Services provides debt and equity investment as well as financing solutions. Siemens Healthineers is a medical devices company that provides products and consulting. Mobility includes passenger and freight transportation. Smart infrastructure includes full solutions for electrification. Digital industries offer both software and hardware for industries and production efficiency.
Uni Klinger Limited, established in 1983 and headquartered in Maharashtra, India, is a manufacturer of flow control equipment, fluid sealing solutions, and steam engineering products. The company offers a wide range of products, including piston valves, bellow seal valves, steam traps, strainers, and more. It also offers liquid-level gauges, safety valves, and control valves. Its products are designed to meet the potential hazards and critical safety needs of chemical processing. Moreover, the company has achieved ISO 9001:2015 certification. It serves a wide range of industries, including power, sugar, refineries, chemicals, fertilizer, and more.
Xiamen Landee Industries Co. Ltd., established in 1994, is an industrial components manufacturer based in Xiamen, China. It releases a new flow control model on a monthly basis and produces over 50 types of compononts, including pipes, valves, flanges, pipe fittings, and gaskets, in over 20 materials and 400 sizes. The company's products are used in the oil rig, gas, chemical, pharmacuetical, and paper-making industries, and it complies with API, CE, and ISO 9001:2008 certification requirements.
KÜHME Armaturen GmbH is a manufacturer of valves for high-risk applications that was founded in 1963 in Bochum, Germany. The company’s products include single-plate gate valves, automatic butterfly valves, and coal dust dampers. These control the flow of liquid and gas materials, prevent backflow, and control the amount of combustible dust particles in the air to prevent fires or explosions. The company maintains several internationally recognized certifications, including ISO 9001 and AD 2000 for operational standards and pressure vessel safety. Its products are used by biomass-to-waste energy plants, petrochemical facilities, and power distribution companies.
Ningbo Yinzhou Plumbing Hardware Co, formed in 2000 and located in Ningbo, United States, is a manufacturer of brass and bronze valves, fittings, and water meters. The company manufactures brass valves, fire hydrants and adaptors, bronze valves, and water meters and parts. It also fabricates brass pipe couplings, bronze couplings, and manifold and radiator parts. It is specifically involved in hydraulic, pneumatic, and industrial ranges. It exports 10 containers each month under the ISO 9001 quality system, consisting of 400 kinds of products.
Bola-Tek Mfg. Co., Ltd., headquartered in Taichung, Taiwan, and founded in 1966, is a manufacturer of valve balls and stems. The company has expanded its product range to encompass several valve types, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its stainless steel and carbon steel products adhere to industry standards like ASTM, EN, JIS, and ANSI. It provides the API 607 fire-safe approved BT-V3WMH series, engineered for fire-safe performance. Additionally, it offers a 2-piece ball valve tailored for high-pressure applications, featuring a 6000psi rating.
Ramén Valves AB, established in 1945 and based in Sweden, is a manufacturer of Ramen ball sector valves and industrial valves with production facilities in Stockholm and Fagersta. The company manufactures badge meters, pressure regulators, and control valves, supplying various industries such as chemicals, fertilizers, mining, minerals, and industrial gas. The company's valves, which feature circular to elliptical openings, are designed to mitigate dewatering and clogging issues. In 1978, the company expanded its product portfolio by incorporating industrial control valves and regulators sourced from various brands.
Valvoindustria Ing. Rizzio S.p.A., established in 1971 and headquartered in Valsesia, Italy, is a manufacturer that manufactures valves for plumbing, HVAC, irrigation, and industrial applications. The company offers a wide range of products, including valves, gate valves, plumbing fixture fittings, and trim products. It also provides flexible joints, air vents, and polypropylene. Its valves allow for a quicker and easier installation than the more traditional methods of soldering and threading. The company has achieved ISO 9001:2008 for its quality system. It serves a wide range of industries such as plumbing, HVAC, and irrigation.
Schubert & Salzer Control Systems, founded in 1999 and based in Bayern, Germany, is a manufacturer of industrial control and stop valves for the process industry. The company's product range includes seat valves, sliding gate valves, and ball sector valves, known for energy efficiency, durability, and minimal noise pollution. These valves are essential in diverse sectors such as chemical, pharmaceutical, food, and beverage processing and in the production of materials like steel and paper. The company's emphasis on compact design and high control accuracy ensures easy installation and maintenance.
Dansk Ventil Center A/S, established in 1999 and headquartered in Vejle, Denmark, is a manufacturer that specializes in valves and accessories. The company offers a wide range of products and services related to valves and accessories, including ball valves, butterfly valves, safety valves, steam traps, and strainers. It also offers in-house engineering and assembly services. Its ball valves are cheaper than other types of valves, which makes them a cost-effective option for installation. It serves a wide range of industries such as oil and gas, pharmaceutical, waste water, FnB, and more.
DRAC Enginyers is a Spanish manufacturer of pipeline components established in 2009 and is based in Berga, Barcelona. Under the brand name DRAC DT, the company offers a wide range of valves, strainers, and pipeline accessories. These include duplex basket strainers, mud box strainers, and bellows with standard or sealed stop valves. Aside from its products, the company also offers custom engineering services for clients with unique project requirements or use cases.
FLAPCON, established in 2017 and headquartered in Istanbul, is a manufacturer specializing in a diverse range of industrial valves. Its product portfolio encompasses industrial valves, actuators, accesssories, connectors, instruments. These products cater to various industries, including oil and gas, chemical, mining, power generation, and water treatment. The company's products are crucial components in controlling fluid and gas flows across applications like pipelines, processing facilities, and industrial machinery, ensuring efficient and safe operations.
PFEIFFER Chemie-Armaturenbau GmbH, established in 1974 and headquartered in Kempen, Germany, is a manufacturer of industrial valves and control valve engineering products. The company offers a wide range of products such as globe valves, butterfly valves, ball valves, and more. It also offers rotary actuators, sampling systems, and pigging systems. Its products can take liquid samples from media flows without requiring a pipeline bypass. Furthermore, the company serves various industries, including healthcare, petrochemical, natural gas, and environmental industries.
Deenpu Machinery Equipment Co., Ltd. is a manufacturer of oil and gas drilling equipment, headquartered in Yancheng City, Jiangsu Province, China. The company's product offerings include plug valves, pup joints, hydraulic power units, as well as remote control panels, and hammer unions. These products meet or exceed API 6A, 16A, 16C, 16D, and 20E specifications. Its manufacturing facility spans over 20 acres, with manufacturing buildings covering 600,000 square feet, housing state-of-the-art processes.
Zhejiang BaoShiJia Valve Co. Ltd., headquartered in Zhejiang, China, is a manufacturer that develops, designs, and sells valve products to customers. The company offers a wide range of products, including rising stem gate valves, cryogenic gate valves, cryogenic globe valves, swing check valves, floating ball valves, and more. It also offers stainless steel Y-strainers, flanged ball valves, and lift check valves. Its ball valves can withstand a temperature range of -20°C to 180°C. Additionally, the company has achieved the KC certificates. It serves a diverse range of industries, including oil refining, chemical processing, power generation, and more.
Marck & Care Engineers Ltd., founded in 1999 and located in New Delhi, Delhi, India, is a manufacturer, exporter, and supplier of industrial valves, sight glasses, automotive strainers, and steam traps. The company’s product catalog includes thermodynamic steam traps, industrial valves and valve fittings, butterfly valves, ball valves, and industrial pipe and tube fittings. Others are knife gate valves, globe valves, lined valves, gate and sluice valves, and pipeline accessories. These valves are used in industries, such as pharmaceutical, petrochemical, oil and gas, food and beverage, and more.
TPS-Technitube Röhrenwerke GmbH, established in 1973 and headquartered in Daun, Germany, is a manufacturer and stockist that specializes in steel and tube products. The company offers a wide range of products, including seamless tubes, flanges, fittings, valves, and heat exchanger tube stock. It also provides oilfield tubing such as tubing, casing, and drill pipe. Its products offer surface finish quality with no weld seam, ensuring high-pressure resistance and a smooth flow of fluids. The company has achieved ISO 9001:2015 and IATF 16949:2016 certification. It serves industries such as oil and gas, chemical, automotive, semiconductor, and more.
TLV, established in 1950, is a Japan-based manufacturer and supplier of steam engineering products such as fluid control equipment, system products, and maintenance instruments. The company offers fluid control equipment including cyclone separators, steam traps, automatic check valves, manifolds, and pressure-reducing valves used for steam, air, and water piping. The company offers maintenance instruments such as pocket trapman. The company also offers consultation, engineering, services, and the design and construction of steam and power systems. TLV has achieved ISO9001 and ISO 14001 certifications for standardization allowing their products to be used in logistics, building maintenance, chemicals, refineries, and petrochemical industries.
ANSSEN Metallurgy Group Co., Ltd., located in Dalian, China, is a manufacturer of metallurgical and mechanical products and equipment. The company specializes in making graphite electrodes, plasma electrodes, lifting plugs, torque wrenches, and carbon anodes. It also produces finned tubes, valves, carbon steel seamless pipes, casting products, and forged products. Its graphite electrodes are important conductive materials in the smelting industry with good electrical conductivity, thermal conductivity, and mechanical strength. It serves various industries, including steel, foundry, and precious metals smelting.
Velan, established in 1950, based in Ville St-Laurent, Québec, Canada, is a manufacturer of industrial steel valves, recognized as a standard-bearer in quality and innovation. The company manufactures valves that meet industrial needs in the areas of power generation, chemical and petrochemical, oil and gas, pulp and paper, and mining industries. Its product portfolio includes check valves, quarter-turn valves, specialty valves, and steam traps. All product valves are designed and manufactured carefully and incorporate many unique design features for environmentally friendly performance, simple maintenance, and quick service.
Reineke Meß- und Regeltechnik GmbH, established in 1912 and headquartered in Bochum, Germany, is a manufacturer that specializes in power plant construction solutions. The company offers control valves, electro-hydraulic drives, and positioning systems for plant and power plant construction. It also provides commissioning, inspection, maintenance, and repair of electro-hydraulic actuators and parking systems. Its products can be modified to meet the specific needs of its customers. The company is certified according to DIN EN ISO 9001, PED 2014/68/EU, and ISO 45001:2018. It serves industries such as mining, heavy industry, power plant technology, waste incineration plants, and biomass plants.
THERMOMESS S.R.L. is a manufacturer of industrial- as well as cryogenic use ball and globe valves established in 1994 and based in Robecchetto Con Induno, Milan. The company's product lineup includes wafer-type ball valves with a steam jacket, cryogenic ball or globe valves with extended bonnets, and split body ball valves. It also produces various thermostats for room, pipe, or boiler temperature control and monitoring operations. The company's products are used primarily by its clients in the oil and gas, power generation, and chemical industries.
HEROSE GMBH is a manufacturer of specialty valves established in 1873 and based in Bad Oldesloe, Germany. The company produces various valves for industrial gasses and fluids, such as cryogenic liquefied industrial or natural gasses. These include pressure regulators, cryogenic safety valves, and free discharge safety valves. Aside from its products, the company also offers custom valve engineering services using VALVIO design and analysis software for its clients with unique project specifications.
A. Hock MSR and Electronic Service, founded in 1995 and headquartered in Wörth Am Main, Bayern, Germany, is a control process and automation equipment and component manufacturer and supplier. The company primarily provides solutions for controllable processes in the oil, gas, and chemical industries using rugged valve, measurement, and sensor technologies, as well as precise switch control devices. These products include pneumatic activators, relative pressure transmitters, and PID controllers, all of which provide reliable long-term performance and low-maintenance operations.
GEMÜ Group is a manufacturer of valves, measurement, and control systems for liquids, vapors, and gases, founded in 1964, the company is headquartered in Ingelfingen, Germany. The Group serves a wide range of industries, including pharmaceuticals, biotechnology, semiconductors, food and beverage, and chemical technology and more. Their solutions help customers reduce their carbon footprint and improve the sustainability of their operations.They have six manufacturing locations, alongside their manufacturing sites in Germany, they also manufacture their products in Switzerland, France, China, Brazil and the USA. Their worldwide marketing is carried out across 27 subsidiaries, coordinated from Germany.
Stöhr Armaturen GmbH & Co KG, founded in 1938 and based in Königsbrunn, Germany, is an ISO 9001 certified manufacturer of valves for gases in liquid and gaseous state. Some of the products it stocks include ambient, cryogenic, and control valves ranging from DN4 to DN300. The valves can handle cryogenic temperatures of down to 4K and high-pressure levels of up to 1,000 bars. In 1947, the company began the development of cryogenic valves for liquid gases, and in 1960, it introduced stainless-steel valves and valves with bellows for safe sealing.
Rustled Flow Control Company established in China, in 1997, is a manufacturer engaged in seal parts (sealing units) that is used to prevent leakage of gases. The company's product line includes Pneumatically & electrically operated Ball valves, Butterfly valves, and Gate Valves. Check Valves, Automatic Control Valves. The company has manufacturing facilities including CNC machining centers, professional processing cells, broad spectrum welding equipment, automatic assembling, and coating lines. The company has sales channels in USA, German, and Russia.
Athena Engineering S.R.L., established in 1984 with headquarters in Italy, is a manufacturer of industrial valves, pumps, and filtration systems. The company has five product brands: Athena for valves and level gauges; GE-STAR for industrial pumps; ROSITATECH for process control instruments; ASAPHTECH for filtration systems; and Valentech for actuators. The company's valve equipment includes ball valves, butterfly valves, strainers, and control valves. The company's industrial equipment and solutions are used in power generation, oil and gas, water distribution, mining, and the chemical industries, as well as other fields. It also provides engineering services that include consulting, commissioning, automation, and maintenance.
VALVULAS FEVISA, established in 1920 with headquarters in Spain, is a manufacturer of industrial valves and equipment under the FEVISA (Franco Espanola de Valvulas Industriales SA) brand. The company's product line includes trunnion-mounted ball valves, motor-operated gate valves, hydraulic adjustable choke valves, and pilot-operated safety valves, and it serves the mining, shipping, civil defense, water distribution, and chemical processing industries, among many others. It also provides a wide range of services that include equipment consulting, commissioning, and maintenance.
CWT Valve Industries, part of CanaWest Group, was founded in 2004, headquartered in Calgary, Alberta, Canada, is a global manufacturer of valves and strainers. The company’s products are used extensively in different industries such as oil & gas, petrochemical, power generation, mining, marine, and construction. It builds its products in many configurations, trims, sizes, and pressure classes to meet the needs of its customers. Apart from designing and manufacturing standard and common valves, it also specializes in producing tailor-made valves and strainers from a wide range of materials, including special alloys. It is an ISO9001:2015, ABSA, and API607 certified supplier.
KITZ SCT Corporation, established in 1951 and based in Japan, is a manufacturer of fluid control devices and equipment. The company produces products such as ultra-high purity gas valves, vacuum exhaust valves, fittings, and thermoplastic valves and supplies to semiconductor manufacturing processes. With 12 companies in Asia, America, and Europe, the company manufactures products used in different phases of semiconductor and FPD manufacturing. All its products are designed according to the ISO 9001 quality standards.
Greenlee, founded in Rockford, Illinois, in 1862 is a manufacturer of Electrical Tools and Telecommunications Tools. The company's product portfolio includes Plumbing Tools, Utility Tools, Power Tools and Accessories, and Wire and Cable Electrical Test and Measurement equipment. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. They also provide services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
ARI-Armaturen Albert Richter GmbH & Co. KG, established in 1950 and headquartered in Schloß Holte-Stukenbrock, Germany, is a manufacturer of industrial valves and makes all its products in Germany. The company is ISO 9001, ISO 14001, and ISO 50001 certified and sells 20,000 products in over 200,000 variants. It has 18 sales subsidiaries and a network of partners in over 50 countries. In 1958, it expanded its product range to 300 items and entered the shipbuilding industry. In 1970, it introduced STEVI control and FABA stop valves, and in 1980, it introduced SAFE safety valves.
Wenzhou AEA Valve Co. Ltd. is an API-6D, PED-CE, and TS-certified manufacturer of valves for the industrial sector founded in 2008 and located in Wenzhou, Zhejiang, China. The company offers globe valves for regulating or throttling flow, gate valves for controlling flow in pipelines, and check valves for preventing backflow in complex systems. It also offers ball valves for regulating or controlling pressure, and specialized valves by customer specifications. The company’s products are commonly used by clients in the oil and gas, petrochemical processing, and power generation industries.
Ralston Instruments, founded in 1969, is an American manufacturer based in Novelty, Ohio, specializing in pressure calibration solutions. The company's product lineup of pressure calibration products encompasses the Ralston Quick-test System, comprising adapter and hose kits, valves, straight adapters, and test point fittings. Alongside these, it offers other calibration products such as compressed gas control, digital pressure calibrations, accompanying software, as well as calibration test pumps. These products find application in various sectors, including maritime, manufacturing, and the oil and natural gas industries. Notably, the company holds accreditation from the American Association for Laboratory Accreditation (A2LA) for performing calibrations on metrological instruments.
KITZ Corporation, established in 1951 as Kitazawa Seisakusho, is a Japanese manufacturer headquartered in Minato, Tokyo, producing valves and other fluid control equipment. The company's valve lineup includes ball, butterfly, and check valves. It also offers other variants like actuated, gate, and globe valves. In addition, the company manufactures fluid control products such as hydrogen stations, water purifiers, and industrial precision filters. These products cater to various industrial applications, including building and construction, machinery and equipment, and industrial plants.
Crane Fluid Systems is based in Ipswich, England, UK, and is a manufacturer of flow management systems and valves established in 1919 as a division of Crane Co. The company offers flow management systems such as static balancing valves for precision flow control, WRAS-approved hot and cold public health valves, and smart valves designed for energy and emissions reduction. It also offers standard butterfly, ball, and drain cock valves for conventional industrial applications The company is ISO 9001-certified, and mainly serves the public utility, building services, and construction sectors.
Belimo Aircontrols Inc. is based in Danbury, Connecticut, USA, and is a manufacturer of HVAC products that was established in 1984 as a subsidiary of the Swiss company Belimo Holding AG. The company’s products include control valves for regulating the flow of water or steam in HVAC systems, damper actuators for controlling air damper shutters, and sensors for monitoring temperature, humidity, or air quality. The company is ISO 9001 and ISO 14001-certified, and provides additional retrofitting services to clients requiring additional assistance.
Dorukendustri, founded in 2001 and based in Istanbul, Turkey, is a manufacturer of industrial valves and actuators. The company produces registered PROVAL brand products that are accepted and used in more than 90 countries worldwide. Modern CNC machining centres are used in the production and processing of the goods. Using an ERP business resource planning architecture and an ISO 9001:2015 quality assurance system, the plant occupies 10,000 square metres. For traceability, every product has a distinct QR code. The products manufactured by the company are used in the chemical, mining, iron and steel, cement, and marine industries.
Watts was established in 1874 and is a manufacturer of water management products based in North Andover, Massachusetts, United States. The company offers various water solutions products such as automatic control valves, gas connection systems, pressure reducting valves, water quality parts, and high purity process piping systems. The products have been used for serving various industries such as healthcare, agriculture, hospitality, commercial, and municipal waterworks. The products have been created under compliance of CSA, NSF International, WQA, BSI, and AGA manufacturing standards.
Aalberts, established in 1975 and headquartered in Charlotte, North Carolina, is a manufacturer and supplier specializing in integrated piping systems for the distribution and control of liquids and gases. The company’s product portfolio includes ball valves, butterfly valves, safety relief valves, fasteners, and more, catering to residential, commercial, industrial, and utility sectors worldwide. The company also offers vertically integrated designs, white label manufacturing of valves, fittings, and other piping system components for diverse projects. The company’s has a team of plumbing and mechanical system experts that provide technical support services to customers.
Bürkert Fluid Control Systems, founded in 1946 and headquartered in Ingelfingen, Germany, is a manufacturer of liquid and gas measurement and control systems. Its product range includes solenoid valves for fluid power systems, process and control valves for managing flow, pressure, and temperature, pneumatics and process interfaces for automation control, sensors, transmitters, and controllers for measuring physical and chemical parameters, and MicroFluidics solutions for precise fluid control. Its products serve diverse industries like breweries, labs, medical, and aerospace.
Famat, established in 1974 and headquartered in Fribourg, Switzerland, is a manufacturer that specializes in valve technology and supplies valve packages. The company offers a wide range of products, including expanding piston technology valves, butterfly valves, gate valves, and check valves. It also offers air and vacuum valves, automatic control valves, control valves with actuators, and ball valves. Its products are based on its patented EPT system, which eliminates the need for O-rings and leaves no dead space. It serves various industries such as water works, power generation, petro-chemical, oil, and pharmaceutical.
OUMING VALVE GROUP CO. LTD. is a manufacturer of stainless steel valves and related products that was established in 1983 in Zhejiang, China. The company primarily produces piece ball valves, multi-port ball valves, and automatic ball valves for regulating or controlling the flow of liquids. It also offers various pipe fittings and castings, as well as custom design and manufacturing services for unique projects. The company is certified to CE, API6D, and API607 standards, chiefly serving clients in the natural gas, chemical processing, and water treatment industries.
TVE Co., Ltd., established in 1922 and headquartered in Hyogo, Japan, is a manufacturer of high-temperature & high-pressure valves. The company specializes in custom-made products for controlling fluid in the high-temperature and high-pressure range. It's product lineup includes globe valve, gate valve, check valve and safety valve, which can all be applied in nuclear and thermal power plants, petrochemical and LNG plants, and marine vessels. It also provides maintenance services involving construction and installation as well as technical consultancy services. The company has obtained ISO 9001 certification and has a non destructive testing and proprietary performance testing including materials, processes, and welds.
Belimo Americas (USA) is a provider of ingenious HVAC (Heating, Ventilation, and Air Conditioning) solutions situated at Switzerland and was established in 1975. The company specialize in offering a comprehensive range of excellent HVAC actuators, valves, and sensors to various industries, including commercial buildings, residential properties, and industrial facilities. The company work closely with manufacturers in HVAC. The company primary role is to provide these cutting-edge products and solutions to customers in the Americas region and deliver unusual customer service.
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
NPP SENSOR LLC, founded in 1992 and headquartered in Zarechny, Russia, is a manufacturer and supplier of instruments and systems for explosive media control. The company’s product portfolio includes SENS measurement systems, solenoid valves, and information indicator boards. These products find ideal applications in various industries, including chemical manufacturing, transportation and logistics, and the oil and gas industry. The company also offers customer support and services such as customization, operation manuals, and detailed product catalogs, and it is ISO 9001:2015 certified for its quality management system.
KOSA Corp, operates as a manufacturer and supplier of industrial control valves, headquartered in Qingpu District, Shanghai, China. The company specializes in the production, research and development, sales, and services of industrial control valves. Its product offerings include a pneumatic diaphragm control valve, electric regulator valve, electronic control valve, self-operated regulating valve, and ultra-small flow regulating valve. These products are generally used for controlling the flow of liquids or gases. It has received the API6D certification from the American Petroleum Institute for its adherence to quality and safety in the production of its products.
Samson is a manufacturer and distributor of control equipment for industrial processes that was founded in 1907 in Frankfurt am Main, Hesse, Germany. The company specializes in products for controlling the flow of industrial liquids, including modular controllers for automation systems, solenoid valves, and pressure sensors. It also offers digital solutions for process optimization and data analysis operations. The company chiefly serves clients in the food and beverage, power generation, and petrochemical industries.
Rotarex, based in Luxembourg, has been a manufacturer and distributor of gas control products and systems since 1922. The company's product lineup encompasses valves, regulators, cylinder valves, fire protection systems, and LPG and CNG equipment. The company operates globally, with subsidiaries and sales offices in various countries worldwide. With a rich history of developing cutting-edge solutions in the gas control industry, the company invests in research and development to create products that meet evolving industry needs. Its products and systems are found in various applications, including manufacturing, healthcare, automotive, fire protection, and more.
KLINGER was established in 1886 in Gumpoldskirchen, Lower Austria, as a manufacturer and supplier of industrial sealings, fluid control systems, and fluid monitoring systems. The company's product list comprises KLINGER CNAF gaskets, KLINGER ball valves (INTEC Range), and Reflex level gauges, among others. The products provide sealing solutions for critical applications requiring chemical resistance and temperature management, precise flow control and shut-off functionality in industrial processes, and essential liquid level monitoring for safe operations. The company serves various industries, including general manufacturing, automotive, infrastructure, marine, and food and beverage.
G M Engineering PVT LTD., established in 2019 and headquartered in Pune, India, is a manufacturer and supplier of chemical and industrial valves. The company’s comprehensive product range entails chemical valves and industrial valves, catering to a diverse clientele spanning chemical, oil and gas, food and beverage, and water treatment industries. The company also provides a suite of services, including engineering and design, manufacturing, testing and certification, supply chain management, and technical support, all aligned with their unwavering devotion to customer satisfaction. The company holds ISO 9001:2015 certification, reflecting its steadfast adherence to quality standards.
XHVAL, established in 1986 and headquartered in Ningbo, China, is a manufacturer and supplier of industrial valves. The company’s product range comprises ball valves, gate valves, butterfly valves, globe valves, and safety valves, serving diverse industries including power, oil and gas, chemical, and water treatment. Its services include engineering and design, testing and certification, and installation as well as maintenance and repair. Devoted to customer satisfaction, it continually develops new products and services to meet customer needs. Additionally, the company holds ISO 9001:2015 certification, showcasing its passion for quality products and processes.
HASCO, founded in 1924 with headquarters in Germany, is a manufacturer, distributor, and supplier of modular standard mold making equipment, ready-to-mount system components, and tools. The company's product line includes mold steel from European suppliers, machined plates, guiding elements, tool components, and measuring technology. The company also provides the HASCO SET of standard engineering tools and offline software for designers of molds, which includes a library of more than 100,000 mold units.
Kerotest Manufacturing Corp., founded in 1909 and headquartered in Pittsburgh, Pennsylvania, United States, is a valve and equipment manufacturer. The company's core products include steel manifolds and globe and gauge valves primarily designed for oil and gas, nuclear fuel, and infrastructure-scale water distribution systems. It also provides electrofusion fittings, tooling accessories, and control boxes for the installation of plastic pipe systems widely used by the natural gas industry. The company sells its products through North American distributors and international channel partners.
Flowserve Corporation, founded in 1790 and headquartered in Irving, Texas, is a manufacturer and supplier specializing in fluid motion and control products. The company's product portfolio includes pumps, seals, valves, energy recovery systems, and decoking systems. These products are utilized across various industries, including power generation, chemical processing, water management, oil and gas, and various general industries. The company also provides customer services, including on-site field services, solutions engineering, system assessments, repairs and maintenance, and training and development.
Vatac Valves Wenzhou Corp, established in 1987 and headquartered in Wenzhou, Zhejiang, China, is a global manufacturer and supplier of industrial valve solutions. It offers an extensive line of materials, from conventional steel to special alloys such as Monel, Inconel, Hastelloy, and Duplex steel. Its product portfolio comprises ball valves, gate valves, globe valves, butterfly valves, and through conduit gate valves, adhering strictly to international standards like API, ASTM, ANSI, and ISO. The company holds CE certification and ISO 9001:2000 quality management system accreditation and operates within vast manufacturing facilities spanning over 500,000 square feet.
Erdmann Corp. is a distributor of industrial valves and related equipment that was established in Kentucky, USA, in 1933. The company’s product inventory includes boiler controls for indoor heating applications, actuated valve accessories for material flow, and pressure regulators for safety applications. It also offers custom fabrication, repair, and field service or troubleshooting for clients requiring additional support. The company chiefly serves clients in the chemical and petrochemical, distillery, and water and wastewater processing industries.
Caylor Indstrial Sales, Inc. was founded in Dalton, Georgia in 1980. Today, Calor serves a number of sectors of the industrial market, in particular engineering, construction, manufacturing, paper mills, and chemical plants. The company is a distributor of many industrial components including valves, fittings, pipe and tube hangers, actuators, and water, steam, and air regulators. The company also offers services as a manufacturer of both low and high-volume production custom parts using a variety of materials including steel, stainless steel, aluminum, brass, Delrin, and Lexan.
Rotolok Holdings Group, founded in 1973, is a manufacturer headquartered in Tiverton, Devon, United Kingdom, producing rotary valves and other material handling equipment. The company’s products include rotary valves, commonly used to regulate the flow of dry powder or granular materials, and slide and control valves, typically used in gravity feed applications. It also offers diverter valves for rerouting granular, pellet, and powder materials. These products find applications in various manufacturing settings, such as food processing, mining, and power generation.
Merx trade is a distributor and supplier of valves and related products that was established in North Brabant, the Netherlands, in 2009. The company stocks products from its own brand MXT, and others such as Elit and 2MS11H. These products include valves for controlling the flow of industrial media, pipe couplings for connecting or repairing different pipe types, and strainers for filtering out particles or impurities. The company is certified to ISO 9001 and ISO 14001 standards, and mainly markets to clients in the maritime, chemical processing, and power generation industries.
Ningbo Baodi Plastic Valve Co., Ltd., founded in 1994 and headquartered in Beilun, Ningbo, Zhejiang, China, manufactures plastic valves, pipes, and fittings. The company offers a range of products, including plastic ball valves, diaphragm valves, butterfly valves, check valves, and globe valves, along with various plastic pipes and fittings. These products are constructed from materials like FRPP, PVDF, UPVC, CPVC, and PPH. It holds an ISO9001 quality system certification and possesses over 20 valve patents.
Indumart Inc. is a company established in 1989 and based in Ontario, Canada, as a distributor of measuring and processing control instruments. Its product portfolio has diverse instruments such as transmitters, pressure gauges, temperature sensors, pneumatic controls, and level indicators. The company also distributes flow meters, calibrators, analytical indicators, paperless recorders, and contact pressure gauges. Its extensive portfolio caters to a wide range of industries, including chemicals, petrochemicals, food processing, wastewater treatment, and energy production industries across India, Canada, and the United States.
VAPTECH, founded in Bulgaria in 1914, is a supplier of electromechanical systems for new and existing hydropower plants worldwide. The company offers hydro turbines, inlet valves, and customized digital control systems that meet all project site requirements for small, medium, and large hydropower plants. It also specializes in upgrading and modernizing existing hydropower facilities to extend their operational lifespan enhance their efficiency and provide comprehensive maintenance and support services to ensure the ongoing reliability of hydropower plants.
Varimex-Valves Ltd., established in 1992 and headquartered in Masovian Voivodeship, Poland, is a distributor that specializes in supplying industrial valves. The company's product line includes gate, globe, check, ball, and butterfly valves. It also provides specialized valves for aggressive media, safety valves, control valves, and pressure regulators. Its valves are mechanical and chemical resistant, ensuring its durability in various industrial environments. The company has obtained the DIN standards for all of its valves. It serves various industries such as machinery, hydraulics, pneumatics, and more.
Rego GmbH, a Dover Company, established in 1908 and headquartered in Central Germany, is a Rego liquid and gas flow and control products distributor and supplier for the Middle East, Asia, and Europe. The company's products are manufactured in the USA and include LNG fueling components, valves and regulators for the propane industry, and cryogenic components also used in medical oxygen delivery systems. Its services include the full supply of all Rego products, product training sessions, and access to the company's warehouse system to see the direct availability of Rego products.
Edgen Murray, founded in 1983 and headquartered in Texas, USA, is a supplier and distributor of quality PVF products for the energy and infrastructure market. The company's product portfolio includes pipes, valves, fittings, and related components. It provides valve automation packages built to customer specifications and offers a range of services related to pipeline valve modifications. Its products are mainly utilized in the oil and gas, mining, and civil construction industries.
Valmet is a Finnish developer and supplier of process technology products for the pulp, paper, and energy industries that was established in Keilaniemi, Espoo, in 2013. The company offers production lines for paper products such as board or tissue, power plants for bioenergy production, and pulp mills for producing pulp from raw materials. It also provides flow control accessories for its products such as valves and pumps. The company's products are used mainly by clients in the pulp and paper, renewable energy, and wastewater processing industries.
Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.
Ranking as of December 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | DFT Inc. |
3.3%
|
2 | Emerson Electric Co. |
2.9%
|
3 | Sterlco |
2.4%
|
4 | CWT Valve Industries Inc. |
2.4%
|
5 | CELEROS FLOW TECHNOLOGY |
1.9%
|
6 | Cla-Val Company |
1.9%
|
7 | Athena Engineering |
1.9%
|
8 | Conval |
1.9%
|
9 | Harwood Engineering Co., Inc. |
1.4%
|
10 | Crane CPE |
1.4%
|
Derivation Method
The ranking is calculated based on the click share within the globe valve page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
United States of America | 43 | 41.0% |
Germany | 17 | 16.2% |
China | 12 | 11.4% |
Italy | 7 | 6.7% |
Spain | 4 | 3.8% |
India | 3 | 2.9% |
Canada | 3 | 2.9% |
United Kingdom | 2 | 1.9% |
Taiwan | 2 | 1.9% |
Japan | 2 | 1.9% |
Czech Republic | 1 | 1.0% |
Sweden | 1 | 1.0% |
Denmark | 1 | 1.0% |
Turkey | 1 | 1.0% |
Russia | 1 | 1.0% |
Luxembourg | 1 | 1.0% |
Austria | 1 | 1.0% |
Netherlands | 1 | 1.0% |