115 Pressure Regulator Manufacturers in 2023
This section provides an overview for pressure regulators as well as their applications and principles. Also, please take a look at the list of 115 pressure regulator manufacturers and their company rankings.
Table of Contents
What Is a Pressure Regulator?
A pressure regulator is a device used to adjust the pressure of compressed gases, liquids, and other fluids.
Normally, gases and pumped fluids filled in pressure-resistant vessels are at dangerously high pressures when used as they are, so it is necessary to control the discharge pressure according to the application in which they are used. In addition, when re-pressurizing or re-filling the container in accordance with the filling volume, it is necessary to control the pressure inside the container. This is done with a pressure regulator so that the pressure inside the pressure-resistant container does not exceed the allowable value.
Uses of Pressure Regulators
In this case, a "backfire prevention valve" is installed on the secondary side to prevent flashback (flames reaching back inside the cylinder and exploding) in the event of a backfire. Oxygen cylinders used for scuba diving are also used to supply a constant pressure of oxygen to divers. In addition, metering pumps use back-pressure valves to prevent fluid inertia and siphon phenomenon, and always pump a constant volume and constant pressure of fluid.
Features of Pressure Regulators
There are two main types of pressure regulators: those that regulate the primary side (inlet side) pressure and those that regulate the secondary side (outlet side) pressure, the former being called a "back pressure valve" and the latter a "pressure reducing valve."
The former is called a "back pressure valve" and the latter is called a "pressure reducing valve." Both valves use the spring rate (spring stress) and fluid pressure in the regulator, and are controlled by the balance between the two.
Although back pressure valves and safety valves work in a very similar way, the purpose of safety valves is to protect facilities by lowering the pressure below a predetermined value, while the purpose of back pressure valves is to "maintain the pressure in the vessel/piping".
In addition, in the case of a self-supporting pressure reducing valve, when the pressure on the primary side drops, the discharge pressure on the secondary side may rise (by 1-2% of the primary fluctuation). To prevent this, there is a two-stage pressure reducing valve that reduces pressure in two stages. For example, in the case of a valve with a secondary-side fluctuation rate of 1.5%, the fluctuation rate can be reduced to 0.0225% (1.5% x 1.5%).
List of 115 Pressure Regulator Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- United Kingdom
-
-
-
-
-
Pearse Bertram+ Streamline Contract Manufacturing
Pressure Regulators
Company Overview
Pearse Betram+ was founded in 1947 in Bloomfield, Connecticut. Today Pearse Bertram+ is an end-to-end solutions provider for the manufacturing industry. Pearse Bertram+ is ISO 9001:2015 certified and also UL508A (industrial control panels), IPC 620 (wire harness assemblies), and IPC-A-610, J-STD-001, and IPC-7711 certified for soldering. Pearse Bertram+ operates in both contract manufacturing and engineering support. The manufacturing segment includes electrical, pneumatic, robotic, hydraulic, and process systems. Engineering support includes support for operation of robotics, machinery design and usage, industrial automation, value engineering, and auditing.
-
-
-
-
-
Fluid Transfer Systems, Inc.
Pressure Regulators
Company Overview
Fluid Transfer Systems, Inc was founded in 1971 and is headquartered in Novi, Michigan. Fluid Transfer Systems supplies fluid handling equipment for many industries including the automotive and agricultural. Fluid Transfer Systems’s equipment categories include agitators, filtration, plural component mixing, pressure tanks & packages, pumps & spray packages, regulators, and spray guns. Fluid Transfer Systems also offers complete custom systems such as pump circulation systems, 2K electronic proportioners, paint kitches, and finishing systems.
-
-
-
-
-
-
-
Cash Acme
Pressure Regulators
Company Overview
Cash Acme is based in Atlanta, Georgia and has a history of over 100 years and is part of the RWC family of brands also including SharkBite, HoldRite, John Guest, and EZ-FLO. Cash Acme is a manufacturer of water control valves for residential, commercial, and industrial plumbing applications. Cash Acme products include pressure regulating valve, temperature & pressure relief valves, thermostatic mixing valves (TMVs), back flow preventers, general plumbing & heating, as well as other applications.
-
-
-
-
-
-
-
GTek Automation
Pressure Regulators
Company Overview
GTek Automation was founded in 1997 as Pacific Engineering and is headquartered in Lake Forest, California. GTek Automation is a technology-based distributor of pneumatic components, leak test and measurements systems. In addition to product distribution, GTek Automation offers product assembly and kitting services to assist our customers reduce the overall cost of component and system acquisition. GTek Automation specializes in the complete integration of the pressure or vacuum source, and all of the auxiliary pneumatic components.
-
-
-
-
-
Ningbo Dino-Power Machinery Co., Ltd.
Pressure Regulators
Company Overview
Ningbo Dino-Power Machinery Co. LTD (Dino-Power) is based in China with representative distributors available internationally. Dino-Power is both in-house and OEM producer for airless paint sprayer products. Dino-Power’s product line includes airless paint sprayers, other spraying equipment, and spare parts and accessories. Airless paint sprayers include piston and diaphragm pump designs, gas powered, airmix, and pneumatic sprayers, airless line marking machines and two component paint spray machines. Other equipment includes texture sprayers, stucco sprayers, hopper sprayers, and more.
-
-
-
-
-
Carlisle Fluid Technologies
Pressure Regulators
Company Overview
Carlisle Fluid Technologies is a conglomerate over many brands including BGK, Banks, DeVilbiss, Hosco, MS, and Ransburg. Through these brands, Carlisle Fluid Technologies globally distributes to industries such as aerospace, automotive OEM, automotive refinishing, general industrial, glass, protective coatings, and wood, solutions for numerous applications such as fluid and sealing needs. Carlisle Fluid Technologies’s product lines include diaphragm pumps, automatic applicators, air filtration, air regulators, hose and tube fittings, gas curing, inspection systems, nozzle cleaning systems, and more.
-
-
-
-
-
BudgitHoist.com
Pressure Regulators
Company Overview
BudgitHoist.com is headquartered in Forest Lawn, Illinois and is owned and operated by Sievert Electric Service and Sales Company. Sievert Electric is a distributor for Budgit Hoist who is the producer. BudgitHoist produces 1/4 to 3t electric chain hoists, air chain hoists, trolleys, repair parts, and other accessories. BudgitHoist offers additional services such overhead crane design sales, service, and repair, as well as electrical repairs and new construction. Additionally, BudgitHoist offers communication installations, repairs, and maintenance, as well as scoreboard installation repair and construction.
-
-
-
-
-
-
-
-
-
Nutec Bickley
Pressure Regulators
Company Overview
NUTEC GROUP was founded in 1975 and is headquartered in Santa Catarina, Mexico. NUTEC is a designer of industrial heating systems serving the metals and ceramics industries. NUTEC offers services including technical service and support, fabrication and installation services, retrofitting, and providing spare part services. Product offerings include industrial kilns, industrial furnaces, heat treatment automated production Ines, industrial electric furnaces, ovens & dryers for lower temperature, pyrolysis furnaces for paint stripping, afterburners/thermal oxidizers, hot air generators, ladle & roundish preheaters, combustion systems & controls, fabrication and installation services, carbon regeneration kilns, and investment casting furnaces.
-
-
-
-
-
Beswick Engineering Co., Inc.
Pressure Regulators
Company Overview
Beswick Engineering was founded in 1964 as an engineering consulting firm. Beswick now operates out of Greenland, New Hampshire. Berwick serves the medical devices, aerospace, analytical instruments, bomb, gas, & narcotic detection equipment, semiconductor, dental, hydrogen fuel cell, industrial robot & automation, inkjet, 3D printing, and packaging & food packaging machinery industries. Beswick offers tubing, tubing clamps, cylinders, compression fitting accessories, filters, mufflers, breathers, orifice restrictors such as drilled orifice fittings and sapphire orifice fittings, valves, regulators, and quick disconnects. Beswick also offers custom design options.
-
-
-
-
-
-
-
Micro Quality Calibration, Inc.
Pressure Regulators
Company Overview
Micro Quality Calibration Inc MQC) was founded in 1978 as a technology-oriented calibration, repair, testing, and first article inspection facility for precision measurement test equipment. MCQ follows in strict compliance of ISO-9000 (series 1, 2, 3, and 4) specifications. MCQ offers services in calibration, inspection testing, repair, database management, and analytics. Calibration services are often provided for automotive, electrical components, aerospace, and secure communications, for which MCQ is ISO 17025 accredited.
-
-
-
-
-
-
-
-
-
Maedler North America
Pressure Regulators
Company Overview
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
-
-
-
-
-
Ohio Medical Parts
Pressure Regulators
Company Overview
Ohio Medical Parts originated in 1910 as Ohio Chemical and Manufacturing Company in Cleveland, Ohio. Today Ohio Medical is a producer of medical air and vacuum pumping systems as well as medical suction and oxygen therapy devices. Ohio Medical services the medical device, medical gas, construction/renovation, ambulatory surgery center, industrial, and OEM solutions industries. Ohio Medical devices are manufactured in an ISO 13485 registered and FDA regulated medical device manufacturing facility. Product offerings include medical devices such as flowmeters, hoses, gas regulators, and suction regulators, as well as medical gas devices such as medical gas systems, vacuum pumps, air compressors, and medical gas accessories.
-
-
-
-
-
ASG, Division of Jergens, Inc.
Pressure Regulators
Company Overview
ASG is a division of Jergens, Inc., was founded in 1976, and headquartered in Cleveland, Ohio. ASG both manufactures and distributes solutions for assembly including precision torque and angle DC electric fastener systems. ASG is ISO 9001:2015 certified. ASG groups include ASG Express, ASG Precision Fastening, ASG Automation, and ASG Integrated Services. Together they specialize in electric and manual screwdrivers, production aides, tool accessories, air motors, pneumatic torque control tools, pulse tools, torque wrenches, current control tool systems, automation systems, auto feed systems, air grippers, torque arms, screwdrivers & nutrunners for automation, and peripheral automation equipment.
-
-
-
-
-
DEPRAG USA
Pressure Regulators
Company Overview
DEPRAG USA is the Lewisville, Texas-based headquarters of DEPRAG, originally founded in 1931. DEPRAG is a distributor of assembly equipment and tools and industrial machinery. DEPRAG’s product lines include advanced screw driving technology with automatic screwdrivers, sequence controllers, measuring technology, accessories, and individual solution offerings. Other product segments include feeding technology including bowl feeders and sword feeders among others, automation including standardized assembly systems and intelligent manual work stations, air motors featuring vane motors and turbine motors, industrial tools, and “Green Energy Turbines segment featuring energy recovery.
-
-
-
-
-
-
-
-
-
-
-
-
-
Haskel International
Pressure Regulators
Company Overview
Haskel began in 1954 and is now part of Ingersoll Rand. Haskel is a designer and manufacturer of high-pressure industrial gas and liquid handling equipment in three categories: hydrogen refueling, products, and aftermarket. Hydrogen refueling includes, refueling stations, hydrogen compressors, hydrogen compression and transfer, hydrogen valves fitting and tubing. Products include liquid pumps, refrigerant pumps, gas boost compressors, air pressure amplifiers, packaged systems, spare parts, system components, and high pressure valves. Aftermarket support includes support for hydrogen stations, repair, maintenance, service, and spare parts.
-
-
-
-
-
-
-
Petersen Products Co.
Pressure Regulators
Company Overview
Peterson Products Company is based in Fredonia, Wisconsin and has a history dating back to its first patent issued in 1916. Peterson Products Company is ISO 9001:2015 certified manufacturer and distributor of products designed to assist customers with wastewater, tunneling, plumbing, and pipeline needs. Peterson’s product categories include annular seals, contractor tools, custom inflatable tools, custom manufacturing, inflation accessories and fittings, lifting bags and pipe handlers, pecker carriers, high pressure pipe plugs, chemical resistant pipe plugs, temperature and pressure gauges, and test equipment.
-
-
-
-
-
-
-
Stephens Mfg. Co., Inc.
Pressure Regulators
Company Overview
Stephens Manufacturing was started in 1957 in Tompkinsville, Kentucky. Stephens is a manufacturer and distributor of concrete-related equipment. Categories include ready mix plants, precast plants, central mix plants, RCC, environmental, and material handling. Ready mix batch plants that generally have quicker installation. Precast plants are custom built. Portable mixers mix RCC and other mixes. Environmental components include dust collectors, reclaimers, and wash down racks. Material handling includes batchers, bins, hoppers, silos, conveyors, and vertical pigs. Stephens offers assistance in customer problem solving and delivers to customers globally.
-
-
-
-
-
-
-
International Polymer Solutions, (iPolymer)
Pressure Regulators
Company Overview
International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.
-
-
-
-
-
-
-
Siemens Process Instrumentation
Pressure Regulators
Company Overview
Siemens Process Instrumentation is a service by industrial giant Siemens. Siemens Process Instrumentation offers single-source measurement solutions to increase plant efficiency and enhance product quality. Siemens Process Instrumentation is a designer of instruments designed to seamlessly interplay with existing industrial automation and control systems. Productand design categories include pressure measurement, temperature measurement, flow measurement, level measurement, positioners, weight measurement, process controlling and protection, supplementary components, communication, product solutions for OEM, and digitalization.
-
-
-
-
-
Plast-O-Matic Valves, Inc.
Pressure Regulators
Company Overview
Plast-O-Matic was formed in 1967 in New Jersey, now situated in Cedar Grove, New Jersey. Plast-O-Matic serves aquarium, chemical dosing, chemical processing, metal finishing, semiconductor, wastewater treatment, water purification, and government application industries. Product offerings include product data sheets, CAD downloads, installation & maintenance instructions, ball valves, check valves, gauge guards, pressure regulators, process cooling sticks, anti-siphon valves, shut-off and diverter valves, sight glass & level indicators, solenoid valves, venting valves, other process controls & pumps, and custom valves.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Brehob Corporation
Pressure Regulators
-
-
-
-
-
Metro Hydraulic
Pressure Regulators
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
Herrmann Associates
Pressure Regulators
Company Overview
Central Air Compressor was founded in 1959 and is based in Warren, Michigan. Central Air Compressor is a supplier of energy efficient air compressors, dry air systems, purification, and industrial process chillers. Central Air Compressor offers both new and used equipment as well as parts and accessories. New equipment options include compressors, air drying & filtration, process water chillers, nitrogen generators, and air piping. Central Air Compressor offers 24-hour emergency service and is able to provide air audits, complete compressed air systems, installation, and preventative maintenance.
-
-
-
-
-
Distributor to Industry, Inc.
Pressure Regulators
Company Overview
Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.
-
-
-
-
-
-
-
Jamieson Equipment Co., Inc.
Pressure Regulators
Company Overview
Jamieson Equipment Company (JEC) was founded in 1982 and located in the state of Georgia. JEC serves infrastructure-related industries including pavement with concrete, aggregate, and asphalt, chemicals, sewage and waste management, and agriculture and food. JEC sells, installs, retrofits, repairs, and offers training and troubleshooting for a range of components and tools from simple fittings to motion sensors to electronics to valves to actuators, cranes, mixers, silos, hoppers, and plants.
-
-
-
-
-
Precision Instrumentation Co.
Pressure Regulators
Company Overview
Precision Instrumentation was founded in 1982 and located in Chino, California. Precision Instrumentation is a distributor of dryers, valves, switches, and other measurement and control products. Product categories include pressure, flow, filters & separators, and controls. The pressure segment includes brass and stainless steel single and dual stage regulators, snubbers, diaphragm seals, and pressure switches. Flow includes rotameters, mass flow meters, controllers, mag meters, ultrasound, and others. Filters & separators include dryers, high flow, low flow, and high and low pressure streams. Valves include valves, switches, displays, controllers, and HMI devices.
-
-
-
-
-
Sterlco Sterling Authorized Dist. - M & M Control
Pressure Regulators
Company Overview
Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Ohio Pipe, Valve & Fittings, Inc.
Pressure Regulators
Company Overview
Ohio Pipe, Valves, & Fittings, Inc. was founded in 1929 as Ohio Pipe Bending & Coiling Company. Also known as the Ohio Pipe companies, they specialize in fully welded, seamless, stainless steel, and PVC pipes of many sizes. Ohio Pipe companies also sell flanges, couplings, ball, butterfly, gate, control, and relief valves, with thousands of unique items in stock. Ohio Pipe companies’ past and current customers include power plants, steel mills, oil and gas companies, chemical plants, water and wastewater facilities, as well as many OEMs.
-
-
-
-
-
-
-
PEP, A Ryan Herco Flow Solutions Company
Pressure Regulators
Company Overview
Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.
-
-
-
-
-
-
-
-
-
-
-
-
-
ARCO Engineering, Inc.
Pressure Regulators
Company Overview
ARCO Engineering was founded in Louisville, Kentucky in 1954. ARCO Engineering, Inc. is a distributor of Pressure, Temperature and Liquid Level instruments, instrument valves, heat trace, comfort heaters, and safety relief valves. ARCO Engineering specializes in products for the natural gas, process, chemical, power, wastewater and OEM markets. ARCO Engineering offers many types of parts including calibration instruments, hand valves, thermocouples, digital meters, drive pressure gauges, respirators, jet pumps, and pressure relief valves.
-
-
-
-
-
Koehler Rubber & Supply Co.
Pressure Regulators
Company Overview
Koehler Rubber & Supply Co. (Koehler) was founded in 1917 and operates out of Independence, Ohio. Koehler is a distributor for specialty fluid application products. Product offerings include spray finishing equipment, fluid pumping and handling, lubrication, hoses, sealants, adhesives, meter mix, dispense systems, spray systems, hydraulic & pneumatic equipment such as adapters and fittings, and measuring devices such as gauges and thermometers. Koehler also offers value-added services such as system design, service & repair, maintenance training, operator training, and efficiency analysis.
-
-
-
-
-
-
-
Central Diesel, Inc.
Pressure Regulators
Company Overview
Central Diesel, Inc was founded in 1972 by Martin R. Wittersheim and is located in Richmond, Virginia. Central Diesel is a distributor of marine, construction, mining, rental, industrial, military, state government, federal government, transportation, and agriculture industries. Central Diesel product categories include diesel engines, diesel engine electrical components, diesel engine filtration systems, diesel engine maintenance & repair, diesel engine turbocharger assemblies, diesel exhaust systems, fuel injection systems & parts, generators, and hydraulic hoses & fittings.
-
-
-
-
-
Automated Valve & Equipment Co.
Pressure Regulators
Company Overview
Automated Valve & Equipment Co. (AVE) was established in 1959 and operates out of Cleveland, Ohio. AVE is a distributor of valves and related products with the ability to provide custom specialty brackets, extension stems, and valve modifications. The valve automation segment features pneumatic control valves, electric control valves, modulating control valves, valve control devices, and remote valve operators. Industrial valves include ball, butterfly, & knife gate valves, gate, globe, & check valves, and control valves & regulators. Specialty valves and Pipe strainers are also available.
-
-
-
-
-
-
-
Modern Fluid Power, Inc.
Pressure Regulators
Company Overview
Modern Fluid Power Inc (MFP) was established in 1970 on the outskirts of Blanchester, Ohio. Modern Fluid Power is a distributor for specialized industrial equipment. Among MFP’s product lines are actuator parts, actuators, and actuator components, liquid levels, flow sights, thermometers, sight plugs, pressure gauges, & pressure switches, hydraulic cylinders, tube fittings, valves, hydraulic accessories, pipe fittings, pipe line strainers, backflow preventers, water gauges, directional control air valves, filters, regulators, lubricators, air cylinders, and ball, safety, relief, butterfly, solenoid, check, needle, gate, & globe valves.
-
-
-
-
-
Guenther Supply, Inc.
Pressure Regulators
Company Overview
Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.
-
-
-
-
-
Glauber Equipment Corp.
Pressure Regulators
Company Overview
Glauber Equipment Corporation (Glauber EC) was founded in 1960 and is based in Lancaster, New York. Glauber EC designs, manufacturers, and distributes pumping products and systems to markets such as biogas, power & utility, renewable natural gas, food & hygienic, industrial, and chemical markets. Glauber EC offers Renewable natural gas (RNG) systems for normal environments as well as hazardous areas and landfills. Glauber EC also offers compressed air, pumping, and environmental protection systems. Pumping systems include centrifugal pumps, positive displacement pumps, and blowers. Additionally, Glauber also offers industrial and small steam turbine packages.
-
-
-
-
-
-
-
Kinequip, Inc.
Pressure Regulators
Company Overview
Kinequip, Inc. was founded in 1946 in Buffalo, NY as a distributor of industrial parts, accessories, and kits. Today these offerings have grown to include motors, compressors, blower systems, clams, pumps, various fittings, gauges, and sensors, as well as pneumatic and high-pressure devices. Kinequip also serves as a distributor for individual device and parts manufacturers. Kinequip additionally offers custom-designed solutions ranging from R&D to unique components and special-made parts, as well as value added designs on demand.
-
-
-
-
-
Orr & Orr, Inc.
Pressure Regulators
Company Overview
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
-
-
-
-
-
N.T. Ruddock Co.
Pressure Regulators
Company Overview
N.T. Ruddock Company was founded in 1951 and is located in Cleveland, Ohio. N. T. Ruddock is ISO 9001:2015 registered and is a distributor off industrial equipment. Product lines include blast cleaning abrasives, equipment and replacement parts, primary and secondary aluminum ingot, aluminum and copper master alloys, and pure metals. Abrasive options include glass beads, corn cob, crushed glass, steel shot, copper slag, and more. Metal options include aluminum alloys, aluminum master alloys, copper master alloys, ferro alloys, alloy additions, and beryllium alloys. Additionally, N.T. Ruddock also sells many types of parts such as nozzles, guns, and valves, in addition to larger equipment such as blast cabinets and blast pots. NT. Ruddock offers installation, cleaning, repair, custom bagging, and in-house blending of abrasives, and repair.
-
-
-
-
-
-
-
Airmatic
Pressure Regulators
Company Overview
AIRMATIC was founded in Philadelphia in 1944. AIRMATIC serves a many industries including cement and concrete, oil, gas, energy, biomass, chemical products, feed & grain, food manufacturing, glass & ceramics, and clay. For these industries, AIRMATIC provides installation, maintenance, fabrication, silo cleaning, inspection, and repair, as well as repair and rebuilding of power tools. AIRMATIC also has an extensive lineup of products for sale including air cannons, automatic lubrication systems, belt conveyor components, flow detectors, finishing equipment, safety equipment, industrial vibrators, railcar openers and unloading equipment, rebar tools, valves and actuators, and mechanical force exciters.
-
-
-
-
-
Sutton-Garten Co.
Pressure Regulators
Company Overview
Sutton Garten Co.’s history dates back to1916 in Indianapolis, Indiana. Sutton Garten is an independent welding distributor, providing products and services. Sutton Garten’s product offerings include welding abrasives, dry ice & blast equipment, electric welding equipment & supplies, filler metals, flux and chemicals, fume extraction equipment, gases, cylinders, dewars, gas equipment for welding, welding hand tools, plasma cutting equipment, metal cutting sawing grinding tools, welding safety equipment, and weld accessories. Sutton Garten’s service offerings include bulk gas installations, carbon dioxide gas fill service, rental welding & cutting equipment as well as repairs.
-
-
-
-
-
Ryan Herco Flow Solutions (HQ)
Pressure Regulators
Company Overview
Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.
-
-
-
-
-
AutomationDirect
Pressure Regulators
Company Overview
AutomationDirect.com was founded in 1994 to provide solutions for the industrial automation market and has been growing its list of offerings ever since. AutomationDirects’ extensive catalog includes individual components such as cables, various controls, I/O devices, relays, gauges, fittings, and sensors to complete systems. Many parts and devices, especially PLC units are customizable. AutomationDirect.com also provides support via video instructions, online manuals, a learning library, an active community forum to further assist customers.
-
-
-
-
-
Compressed Air Systems, Inc.
Pressure Regulators
Company Overview
Compressed Air Systems was founded in Tampa, Florida in 1963. Compressed Air Systems supports customers in a wide array of industries including food & beverage, medical applications, industrial, electronics, fleet maintenance, aerospace, pharmaceuticals, plastics processing, CNC machine shops, and woodworking. Compressed Air Systems sells air compressors, railcar gate openers and various related products. Compressed Air Systems also offers services including audit, leak compressed air leak elimination, compressed air rentals, and turnkey packages for industrial equipment systems.
-
-
-
-
-
Circle Valve Technologies Inc.
Pressure Regulators
Company Overview
Circle Valve was founded in 1986 and headquartered in Harleysville, Pennsylvania. Circle Valve is a value-added distributor and manufacture rep of industrial valves, fittings, filters, and measurement control devices for a variety of industries and applications. Among Circle Valve’s product listings are check valves, relief valves, vacuum & high purity fittings, circle seal solenoid valves, Jefferson solenoid valves, Atkomatic solenoid valves GO regulators, cryogenic valves & equipment, hoke valves, Gyrolok Tube Fittings, Circle Seal Control Valves, and various measurement devices.
-
-
-
-
-
Adhezion Inc.
Pressure Regulators
-
-
-
-
-
Industrial Scientific Corp.
Pressure Regulators
-
-
-
-
-
Entegris
Pressure Regulators
-
-
-
-
-
Saint-Gobain Electronics - High Purity Fluid Management Solutions for Semiconductor Manufacturing
Pressure Regulators
-
-
-
-
-
Saint-Gobain Life Sciences
Pressure Regulators
-
-
-
-
-
Albertus Energy, Inc.
Pressure Regulators
-
-
-
-
-
Colton Industries
Pressure Regulators
-
-
-
-
-
Emerson Electric Co.
Pressure Regulators
Company Overview
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
-
-
-
-
-
Mod-Tronic Instruments Limited
Pressure Regulators
Company Overview
MOD-TRONIC Instruments Limited was established in 1972 in Brampton, Ontario, Canada. MTis a distributor of industrial sensors, transducers, heaters, controls, and instrumentation, primarily made in the USA as well as Japan, Switzerland, and Germany. MT’s customers are primarily in the aerospace, building automation, manufacturing, medical, military, oil and gas, and water treatment industries but also serves individuals. MT offers an above industry standard 5-year warranty and technical support on every product sold.
-
-
-
-
-
Air Center, Inc.
Pressure Regulators
-
-
-
-
-
Energy Equipment Co., Inc.
Pressure Regulators
-
-
-
-
-
Erdmann Corp.
Pressure Regulators
-
-
-
-
-
Motion Industries, Inc.
Pressure Regulators
-
-
-
-
-
-
-
SENNINGER(R)
SOLID SET PRESSURE REGULATORS
-
-
-
-
-
GP Reeves Inc.
Pressure Regulators
-
-
-
-
-
Neon Controls
Pressure Regulators
-
-
-
-
-
American Precision Supply, Inc.
Pressure Regulators
Company Overview
American Precision Supply (APS) was founded in the 1980s and is based in Hampshire, Illinois. Hampshire distributes products that serve the chemical, biotech, wastewater, power generation, pharmaceutical, medical, commercial, food/beverage, municipal, education, and OEM markets. APS product offings include TLV steam products, control valves, steam traps, actuation, instrumentation, corruption resistant components, pipe fittings, commercial, sanitary, pipe, and steam and condensate components. APS offers precision pipe cutting, grooving, threading, custom lined pipe spools, inventory management programs, surveys, and valve repair.
-
-
-
-
-
Interstate Pipe & Supply Co.
Pressure Regulators
Company Overview
Interstate Pipe & Supply Company was established in 1968 and operates out of Butler, Pennsylvania. Interstate Pipe & Supply is a distributor serving municipal and industrial customers such as the oil and gas industry. Interstate Pipe & Supply products include pipes, valves, fittings, pumps, industrial products, municipal products, water, oil, gas well products, well pad products & accessories, tanks, tools, plumbing fixtures & appliance products, catch basins & trench drains, as well as accessories.
-
-
-
-
-
Fournier Rubber & Supply Co.
Pressure Regulators
-
-
-
-
-
Pacific Bay Equipment - Formerly Hosty Pacific
Pressure Regulators
-
-
-
-
-
B & B Instruments, Inc.
Pressure Regulators
Company Overview
B&B Instruments (BBI) was incorporated in Indiana in 1972 and still operates out of Indianapolis, Indiana today. BBI is an authorized stocking distributor for manufacturers of measurement, control & calibration equipment for pressure, temperature, flow, humidity, & level instrumentation serving both startups as well as Fortune 500 clients in industries such as utilities, metals, food, process, industrial, OEMs, and technical. BBI’s product categories include calibrators, controllers, meters, flow, gauges, humidity, level, meters, pressure, switches, temperature, and transmitters. Featured products include Autrol Transmitters APPT-3100 Differential Pressure Transmitter, Barksdale’s UDS7 Series Solid State Pressure Switches, Kytronic’s actuator positioner, and Monarch DataChart’s DC1250 2-Channel Paperless Recorder.
-
-
-
-
-
OTP Industrial Solutions
Pressure Regulators
Company Overview
OTC Industrial Technologies, formerly known as OTP Industrial Solutions, was founded in 1963 and headquartered in Columbus, Ohio. OTC is and industrial distributor for automation machinery for industrial customers in industries such as steel production, paper, agriculture, process & manufacturing, and water treatment, across northern and northeastern United States. OTC’s product line includes individual parts such as bushings for power transmission or roller bearings, machines such as pumps and ovens, and systems including air filtration systems. OTC offers custom engineered solutions, engineered pump systems, rental options, and services and repair capabilities across the United States.
-
-
Pressure Regulator Manufacturer Ranking
*Including some distributors, etc.Ranking as of March 2023 in United States of America
Derivation MethodRanking as of March 2023 Globally
Derivation MethodDerivation Method
The ranking is calculated based on the click share within the pressure regulator page as of March 2023. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Parker Hannifin Corp: 3,100
Newly Established Company
- Pressure Tech Ltd: 2000 (23 years ago)
- Matjack-Indianapolis Industrial Products: 1981 (42 years ago)
- Aqua Environment Co., Inc.: 1967 (56 years ago)
Company with a History
- ENIDINE: 1920 (103 years ago)
- Parker Hannifin Corp: 1924 (99 years ago)
- Marotta Controls, Inc.: 1943 (80 years ago)
Related Products
Search from All Categories
This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.