14 Syringe Filter Manufacturers in 2024
This section provides an overview for syringe filters as well as their applications and principles. Also, please take a look at the list of 14 syringe filter manufacturers and their company rankings. Here are the top-ranked syringe filter companies as of November, 2024: 1.G -Science, 2.New Star Environmental, 3.Globe Scientific Inc..
Table of Contents
What Is a Syringe Filter?
Figure 1. Syringe filter
A Syringe Filter is a disk-type filter that is attached to the end of a syringe.
It is used to remove particulate impurities from a liquid sample. When a syringe filter is attached to the tip of a syringe, the solution passes through the filter as it is pushed out, and insoluble matter is removed.
The filter part is made of PTFE (polytetrafluoroethylene) or PVDF (polyvinylidene fluoride). The material is selected based on the characteristics of the solvent and the target material to be removed. Since there are a variety of pore sizes, the most appropriate filter should be selected according to the size of the particles to be removed.
Syringe Filters are usually used on a disposable basis.
Uses of Syringe Filters
The main applications of syringe filters include sample purification and pretreatment of various analytical samples. Major analytical methods include HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. They are also used in general filtration to remove fine impurities in aqueous solutions and organic solvents.
Another application is sterilization, where bacteria smaller than the pore size of the filter are removed by filtration. In this case, an appropriate sterilization filter must be used.
Syringe filters themselves, like membrane filters, are not very large and can only capture particles on their surface. If there is a large amount of insoluble material, another pretreatment should be performed beforehand to remove most of the insoluble material.
Principle of Syringe Filter
Figure 2. How a syringe filter works
A syringe filter consists of a disc-shaped filter in a plastic case. The plastic case has a protrusion with a hole at each end. When a syringe is attached to one end and the plunger of the syringe is depressed, the solution flows through the filter and out the other protrusion. As the solution passes through the filter, particles larger than the filter's pore size are intercepted and insoluble material is removed.
Filters are available in a variety of pore sizes. Particles larger than the maximum pore size listed on the product can be trapped on the surface of the filter. On the other hand, the pores can become clogged by large amounts of insoluble matter, so it is necessary to use an appropriate filter after confirming the type, amount, and particle size of the insoluble matter.
Types of Syringe Filters
Syringe Filters can be classified in terms of material, sterility, and pore size.
1. Material
Typical Syringe Filters are made of the following materials
- PTFE (Polytetrafluoroethylene)
- PVDF (Polyvinylidene Fluoride)
- PES (Polyethersulfone)
PTFE and PVDF are hydrophobic materials, but some products can be applied to a wide range of polar and non-polar solvents by hydrophilizing the surface.
2. Sterilization/Non-Sterilization
Syringe filters can be sterilized or non-sterilized. Non-sterile syringe filters are used for general filtration and sample purification.
Sterile syringe filters, on the other hand, are used to sterilize solutions or to clarify sterile solutions. Since common bacteria are 1-5 μm in size, a filter with a pore size of 0.22 μm is sufficient for filtration and sterilization.
However, some bacteria of the genus mycoplasma have a size of about 0.2 μm. For the purpose of removal of bacteria of the genus mycoplasma, it is necessary to select a filter pore size of 0.1μm. Bacteria of the genus mycoplasma parasitize eukaryotic cells and affect cell culture. Therefore, it must be kept in mind in cell culture experiments where mycoplasma negativity is essential.
3. Pore Size
Figure 3. Differences in removed particle size
The pore sizes and applications of syringe filters are mainly as follows:
- 0.1 μm: removal of mycoplasma
Used for mycoplasma removal from reagents and culture media. Since mycoplasma spp. are parasites of eukaryotes, mycoplasma-negative cells are a prerequisite for tests using cells. This type of filter should be used because mycoplasma spp. with cell size of about 0.2-0.3 μm, which have no cell walls and are irregularly shaped, can pass through a general sterilization filter (pore size 0.22 μm). - 0.22μm: Sample pretreatment/Filtration sterilization
This filter is used for sample pretreatment for analytical instruments that use fine packing materials such as UPLC. Sterilization filters are used for sterilization applications. - 0.45 μm: Sample preparation for analysis
Used for general sample preparation such as HPLC samples. - 0.8 μm: Particle removal
Used to remove relatively large foreign particles such as ampoule fragments in drugs.
List of 14 Syringe Filter Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Germany
-
-
-
Globe Scientific Inc.
Sterile PVDF Syringe Filters
Manufacturer Overview
Globe Scientific Inc. is an American ISO 9001 certified manufacturer of laboratory equipment that was founded in 1983 before its acquisition by the GSI group in 2022. Headquartered in Mahwah, New Jersey, the company produces laboratory benchtop equipment, glassware, and plasticware including centrifuges, vials, microscopes and beakers. These are primarily used for chemical testing or analysis, research, and quality control applications. Globe Scientific also offers contract manufacturing and packaging services for customer projects and equipment orders. The company chiefly serves clients in the education, healthcare, biotechnology, and laboratory sectors.
-
-
-
-
-
Corning Incorporated
Syringe Filters
Manufacturer Overview
Corning Incorporated, founded in 1851 and headquartered in Corning, New York, is a manufacturer and supplier of specialty glass, ceramics, and optical fiber. Their offerings include optical fiber for long-distance light signal transmission, specialty glass for applications like displays and lighting, ceramics for various uses, such as cookware and medical implants, and advanced materials like 3D printing powders and ceramic matrix composites. Additionally, Corning provides products for the life sciences industry, such as labware, consumables, and analytical instruments.
-
-
-
-
-
Agilent Technologies
Syringe Filters
Manufacturer Overview
Agilent Technologies, Inc. is a global supplier headquartered in Santa Clara, California, that provides instruments, software, services, and consumables for laboratories, was established in 1999 as a spin-off from Hewlett-Packard. The company serves analytical laboratories and the clinical and routine diagnostics markets with a full suite of technology platforms. These include automation, bioreagents, gas and liquid chromatography, informatics, and vacuum technologies. They provide critical tools and capabilites that help customers address some of humanity’s biggest challenges including disease detection and therapeutics, environmental health, and food safety.
-
-
-
-
-
Pall Corporation
Syringe Filters
Manufacturer Overview
Pall Corporation, founded in Port Washington, New York in 1946, is a manufacturer of purification and filtration technology for semiconductors. The company's product portfolio includes cleanliness cabinet service and instruments, depth filter sheets, diagnostic and monitoring wquipment, filter capsules and filter cartridges. The products are used in industries such as food and beverage, pharmaceutical and biotechnology, chemical and petrochemical, environmental testing and healthcare. The company also provides services including global distribution, product selection, installation, preventative maintenance, troubleshooting, and global customer service.
-
-
-
-
-
Thermo Fisher Scientific Inc.
Filtration
Company Overview
Thermo Fisher Scientific Inc., founded in 1956 and headquartered in Waltham, Massachusetts, is a manufacturer and supplier of life science solutions, analytical instruments, specialty diagnostics, laboratory products, and biopharma services. Through its brand names, including Invitrogen, Fisher Scientific, Patheon, Applied Biosystems, and Gibco, among others, the company provides a wide range of products, which include chromatography systems, thermal cyclers, automated cell counters, fermenters, and DNA polymerases. The company’s annual revenue is over 40 billion USD, and it serves several fields, including customers working in clinical diagnostic labs, research institutions, hospitals, government agencies, and pharmaceutical/biotech companies.
-
-
-
-
-
Ibis Scientific
Syringe Filters
Company Overview
Ibis Scientific is a supplier of analytical laboratory products and certified reference standards to Analysts. The company is based in Las Vagas, Nevada, United States, and is a major distributor for premium laboratory product manufacturers including Biotix. The company's core product lines include Sample Prep Products, Liquid Handling Products, Certified Reference Materials, and General Lab Products. Ibis Scientific's analytical instrument components and high-purity lab chemicals such as reagents serve pharmaceutical, petrochemical, and cannabis testing laboratories throughout North America.
-
-
-
-
-
New Star Environmental
Syringe Filters
Company Overview
New Star Environmental is located in Roswell, Georgia, USA, and has been a manufacturer and distributor of environmental monitoring and laboratory equipment since 2012. The company offers various instruments and supplies for air quality assessment, particle measurement, gas detection, laboratory work, and fluid management. The company's core product include Whatman filtration, Gas Check by Ion Science, particle counters & impactors, sample collection tools as well as laboratory supplies, utensils, and gas detectors. The industries that benefit from these products include research institutions, universities, government agencies, environmental, as well as pharmaceutical and industrial hygiene companies.
-
-
-
-
-
Tisch Scientific
Syringe Filters
Company Overview
Tisch Scientific, founded in 1954 and located in Cleves, Ohio, is a distributor and manufacturer of lab filtration products and equipment. The company offers a range of products that include filters, lab equipment, whatman, cryogenic, and viral testing. The company's products have applications in laboratory filtration, research support, cryogenic solutions, and viral testing for scientific and medical purposes. The products serve a range of industries, including life sciences, pharmaceuticals, medical research, environmental testing, and chemical research. Tisch Scientific's products are used to enhance laboratory processes, research endeavors, and testing procedures across scientific and medical domains.
-
-
-
-
-
Nantong Filterbio Membrane Co.,Ltd
Syringe Filter
Manufacturer Overview
Nantong FilterBio Membrane Co., Ltd, based in Nantong, China, is a manufacturer of microfiltration products since 2012. It offers various products such as disc membrane and syringe filters, disposable vacuum filters, solvent filtration apparatus, TLC plates, and high-flow filter cartridges. The company's products consist of membranes made of nylon, MCE, CA, CN, PES, PVDF, as well as PTFE, PP, and glass fiber, with pore sizes ranging from 0.1μm to 10μm. With 100,000 clean workshops and ISO9001 certification, the industries that benefit from these products are bioscience, pharmacy, microelectronics, food & beverage, and more.
-
-
-
-
-
Merck
Sterile Syringe Filters
Manufacturer Overview
Merck, started in 1668 and based in Darmstadt, Germany, is a supplier of solutions and services for research, development, and manufacture of pharmaceutical and biotechnological drug therapies. The company serves the life science industry and has a broad portfolio of 300,000 products, including biopharmaceutical manufacturing, industrial microbiology, reagent, life science research, and water purification products. It is available in 66 countries, brings together six brands, and has several ISO certifications, including ISO 13485, ISO 14001, ISO 13485, and ISO 50001.
-
-
-
-
-
G -Science
GL Chromatodisc Syringe Filter
Manufacturer Overview
GL Sciences is a Japanese manufacturer of gas and liquid chromatography equipment that was established in Shinjuku, Japan in 1968. The company produces liquid and gas chromatographs, columns for separating compounds, fillers for making up stationary phases in columns, and consumables. It also offers gas and air sampling equipment, HPLC instruments, and helium leak detectors. The company’s products are used primarily in the life sciences, environmental sustainability, food processing, and mining industries.
-
-
-
-
-
MilliporeSigma
Syringe Filters
Manufacturer Overview
Millipore Sigma, formerly known as Sigma-Aldrich, was created in 175 through the merger of Sigma Chemical Company and Aldrich Chemical company and today is a subsidiary of Merck. Millipore Sigma is a life science and biotechnology company serving the industry with several products and services. Some of their product categories include peptide synthesis materials, biochemicals, building blocks, catalysts, chemical biology, chemical synthesis, flavors & fragrances, formulation, lab chemicals, lab safety, APIs, and stable isotopes. Services include characterization, contract manufacturing, custom products, software, support, testing, and mRNA development & manufacturing.
-
-
-
-
-
Sartorius AG
Syringe Filters
Company Overview
Sartorius AG was founded in 1870 and specializes in lab products and bioprocess solutions. The company has its headquarters in Gottingen, Germany with locations in major biopharma markets including the Americas and Asia Pacific. Sartorius' range of solutions includes instruments, consumables, and services for chemical, food, biopharmaceutical, and academic laboratories. The company offers automated bioreactors and fermenters, a portfolio of cell culture media, and a range of laboratory essentials such as balances and filtration devices. The company also offers regular preventive maintenance services.
-
-
-
-
-
Lab Filtration Papers
Syringe Filters
Company Overview
Lab Filtration Papers is a laboratory paper materials distribution company and online shop based in North America specializing in the distribution of Ahlstrom-Munksjö scientific products. The company’s product portfolio includes filter papers, wall liners, beverage filter media, and specialty labels used in various industries, including laboratories, scientific research, manufacturing, and more. The company also offers custom solutions with options to deliver Ahlstrom-Munksjö papers in special sheet, roll, or die-cut sizes. With a focus on personalized service and support, Lab Filtration Papers offers comprehensive technical information on Ahlstrom-Munksjö materials and personalized support to meet diverse client requirements.
-
-
Syringe Filter Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | G -Science |
18.2%
|
| 2 | New Star Environmental |
12.7%
|
| 3 | Tisch Scientific |
10.0%
|
| 4 | Globe Scientific Inc. |
10.0%
|
| 5 | Corning Incorporated |
9.1%
|
| 6 | Lab Filtration Papers |
7.3%
|
| 7 | Nantong Filterbio Membrane Co.,Ltd |
6.4%
|
| 8 | Ibis Scientific |
6.4%
|
| 9 | Agilent Technologies |
5.5%
|
| 10 | Pall Corporation |
4.5%
|
Derivation Method
The ranking is calculated based on the click share within the syringe filter page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Agilent Technologies: 17,000
- Sartorius AG: 15,000
Newly Established Company
- Agilent Technologies: 1999 (25 years ago)
- Globe Scientific Inc.: 1983 (41 years ago)
- Sartorius AG: 1870 (154 years ago)
Company with a History
- Corning Incorporated: 1851 (173 years ago)
- Sartorius AG: 1870 (154 years ago)
- Globe Scientific Inc.: 1983 (41 years ago)
Syringe Filter Manufacturers in United States
*Including some distributors, etc.
- Globe Scientific Inc.
- Corning Incorporated
- Agilent Technologies
- Pall Corporation
- Thermo Fisher Scientific Inc.
- Ibis Scientific
- New Star Environmental
- Tisch Scientific
Global Distribution of Syringe Filter Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
8 | 80.0% |
China
|
1 | 10.0% |
Germany
|
1 | 10.0% |
List of Syringe Filter Products
27 products are listed.
G -Science
GL chromatic disk non -water system (organic system) <n type>
30+ people viewing
The GL chromatur disc is a disposable syringe filter consisting of polypropylene housing and filter. As for the raw materials for polypropylene hou...
G -Science
GL chromatic disk water system / non -water system (combined use) <P type>
30+ people viewing
The GL chromatur disc is a disposable syringe filter composed of polypropylene housing and filter. The raw materials for polypropylene housing are ...
G -Science
GL chromatic disk high flow type HF
30+ people viewing
The GL chromatur disc is a disposable syringe filter consisting of polypropylene housing and filter. As for the raw materials for polypropylene hou...
G -Science
GL chromatur disk pre -filter type PF
30+ people viewing
The GL chromatur disc is a disposable syringe filter consisting of polypropylene housing and filter. As for the raw materials for polypropylene hou...
G -Science
GL chromato disk ionic chromat analysis <AI type>
40+ people viewing
The GL chromatur disc is a disposable syringe filter consisting of polypropylene housing and filter. As for the raw materials for polypropylene hou...
G -Science
GL chromatic disk water system <A type>
40+ people viewing
The GL chromatur disc is a disposable syringe filter consisting of polypropylene housing and filter. As for the raw materials for polypropylene hou...
