This section provides an overview for gas detectors as well as their applications and principles. Also, please take a look at the list of 102 gas detector manufacturers and their company rankings. Here are the top-ranked gas detector companies as of November, 2024: 1.SAE Manufacturing Specialties Corp, 2.Global Detection Systems Corp., 3.Danfoss Industrial Automation.
Table of Contents
Categories Related to Gas Detectors
A gas detector is a machine that measures the concentration of a target gas. There are various types of gas detectors, ranging from those used to detect gas leaks in homes to those used in industrial settings. All of these detectors are used to protect the safety of workers by alerting them to the presence of gases.
For residential use, the target gases are city gas and propane gas. For industrial use, detectors are used to measure oxygen concentration and detect toxic gases such as carbon monoxide and hydrogen sulfide, as well as flammable gases such as organic solvents.
Gas detectors are widely used in gas production, chemical plants, semiconductor factories, tunnel construction sites, the steel industry, agriculture, and homes. Gas leakage can cause a variety of hazards.
For example, leakage of flammable gases can lead to large-scale problems such as fires and explosions. Toxic gases can cause health hazards to workers and environmental pollution. Oxygen concentrations below a certain level can cause workers to die of asphyxiation.
Gas detectors are used to quickly detect and notify workers of gas leaks that could cause these serious accidents. Therefore, the appropriate type of gas detector must be selected for each application.
Gas detectors can detect a wide range of gases and analyze them in a variety of ways. For many sensors, organosilicon gases, corrosive gases (SOx, NOx, etc.), and acidic gases (HF, HCl, etc.) are gases that cause deterioration (= miscellaneous gases). In addition, gases other than the target gases, such as hydrocarbons, alcohols, and organic solvents, can in many cases, interfere with accurate measurements (interference gases).
It is important to check in advance the type of sensor built into the detector you are considering using and the corresponding type of miscellaneous or interfering gases. The principle of each type of sensor and the gases to be measured are described below.
This sensor uses the change in resistance that occurs when a semiconductor comes into contact with a gas. It has high sensitivity and can measure even low concentrations. Target: Flammable gases, toxic gases
Instead of a semiconductor used in the semiconductor type, a platinum wire coil and a semiconductor are integrated. It is characterized by its high sensitivity and suitability for miniaturization. Target: Flammable gases, toxic gases
This type utilizes the heat generated when combustible gas burns on a new ceramic (ultrafine particulate oxidation catalyst). It can measure a wide range of concentrations and is expected to operate stably. Target: Combustible gas
Platinum, an oxidation catalyst, is heated to a high temperature, and when gas strikes it, a combustion reaction occurs, and the temperature rises. This temperature change is used for detection. Excellent accuracy and reproducibility. Target: Combustible gas
Detects the electric current generated when the gas is electrolyzed on the electrode. The target gas can be selected by setting the potential and is not easily affected by interfering gases. Target: Toxic gases
A galvanic battery is built inside. When gas permeates through the diaphragm inside the battery, a reaction occurs between the two electrodes, generating an electric current. The strength of this current is used as the concentration of the target gas. The built-in battery can be operated without an external power supply. Target: Oxygen
Each type of gas has the property of absorbing infrared rays at specific wavelengths. The concentration of the gas is calculated from the amount of infrared radiation absorbed at the measurement wavelength. It can be operated stably over a long period and has high selectivity for the target of measurement. Target: Combustible gases, toxic gases
Detects gases based on changes in the refractive index of the gas. It can be operated with stable accuracy for a long period. Object: Combustible gases
The temperature of the detector element rises when the hot element comes into contact with the gas. The gas concentration is calculated from the value of the temperature change and the change in resistance of the element. Suitable for measurement of highly concentrated gases. Target: Combustible gases
*Including some distributors, etc.
Sort by Features
Sort by Area
Ideal Calibrations is the calibration gas manufacturer that helps you with your gas detection problems! We blend calibration gas in house and are uniquely positioned to help you when it comes time to buy, calibrate, repair, or rent gas detectors to keep your workers safe. Our 100% free tech support line is available 9AM-5PM to help with your gas detection questions, including calibration walkthroughs or helping you install new sensors or parts. Shop our huge online parts selection or use our handy calibration and gas detection guides. We keep calibration gas, regulators, and most detector parts in stock and ready to ship. Can't find your part? Give us a call or use our live chat to reach a knowledgable gas detector customer service agent!
Headquartered in League City, Texas, Global Detection Systems Corp. is a manufacturer and global supplier specializing in fixed gas detection systems since its establishment in 2001. The technology includes gas sensors, flame detectors, process monitors, and system controllers. GDS Corp applies reliability and ease of use in designing customized configurations of equipment and software for industrial applications, including refineries, chemical plants, and manufacturing facilities. The company also supplies such detection systems for marine applications, as well as toxic gas sensors and protector controllers for municipal water facilities.
Headquartered in Everett, Washington, Fluke is an American-born company operating since 1948. Fluke offers a variety of testing equipment including digital multimeters, thermal cameras, solar PV testing equipment, thermometers, oscilloscopes, leak detection devices, as well as testing-equipment related accessories. Fluke offers direct online sales.
Danfoss was founded in 1933 in Nordborg, Denmark where it remains today. The company serves automotive, food & beverage, energy & natural resources, wastewater, and mobile hydraulics industries as a manufacturer of power systems and industrial hydraulics. The company operates through three business segments: Danfoss Power Solutions, Danfoss Climate Solutions, and Danfoss Drives. Danfoss Power Solutions produces electronic controls, hydraulic power units, and cylinders. Climate Solutions produces heat exchangers, burner components, hydraulic heating, and sight glasses. Drives produce gear motors, low and medium voltage drives, and various software solutions for operating drives.
Honeywell International Inc. was founded in 1885 and headquartered in Charlotte, North Carolina. Honeywell is a diversified technology and manufacturing company to global customers in many industries such as aerospace, building technologies, performance materials, manufacturing, and safety. Honeywell produces hardware and software solutions for each industry it serves. In building technologies, Honeywell designs access controls, electrical and wiring, fire life safety, and employee training services. In aerospace, Honeywell designs cockpit systems and displays, engines, cabin management and cleaning, and health and usage monitoring.
GOW-MAC Instrument Co., stationed in Bethlehem, Pennsylvania, dating back to its founding in 1935, has been a manufacturer specializing in high-performance gas analysis analytical instrumentation. The company manufactures custom-engineered gas chromatographs and gas analyzers, serving an extensive clientele hailing from the domains of bulk, specialty, medical, and industrial gases. The gas chromatographs and gas analyzers incorporate a range of detection methods such as TCD, PID, FID, FPD, HFADD, colorimetric, or electro-optical detection to cater to the unique needs of customers in research, academia, and quality control from all over the world.
Spectrex Inc., headquartered in Chanhassen, Minnesota, is a manufacturer of hazard detection and suppression solutions for high-risk and commercial applications. The company stocks fire detection products and open-path gas detectors. Its 40/40 series flame detectors have HART output and a heated window to withstand harsh conditions. These flame detectors are hazardous area approved for zone I locations, and the range includes single UV, combined UV/IR, and IR3 types. Some of its suppression solutions include flame suppression systems, controllers, and extinguishers, and the company serves industries such as marine, aviation, and power generation.
Bruker, founded in 1960 and based in Billerica, Massachusetts, is a manufacturer and distributor of scientific instruments and analytical and diagnostic solutions. The company's product range includes analyzers, microscopes, and imaging solutions, which have applications in fields such as life science research, cell biology, and microbiology. In 1969, the company developed the world's first FT-NMR spectrometer system, enabling broadband proton decoupling. In 1997, it further expanded its capabilities by acquiring the analytical X-ray division of Siemens AG. The company holds ISO 9001 and ISO 13485 certifications, and its products are available for sale worldwide.
Air Systems International, Inc. founded in Chesapeake, Virginia, USA, in 1984, is a manufacturer of Grade-D breathing air and confined space ventilation products. The company’s product portfolio includes Grade-D breathing air filtration products, confined space ventilation equipment, air cylinder carts, compressors, and fire service products. Its portable and fixed breathing air filtration systems meet OSHA 1910.134, Canadian Z180.1 Breathing Air Standards, and British Standards. The company is an ISO 9001: 2015 manufacturer of safety equipment. It serves the construction industry, government, military, fire service, and Rescue department.
GrayWolf Sensing Solutions, established in 1998 with headquarters in the USA and Ireland, is a manufacturer of portable datalogging and fixed monitoring indoor air quality meters and monitors. The company's products include portable toxic gas meters, portable and semi-permanent VOC meters, particulate meters, and plug-and-play air toxicity sensors that can perform as many as six tasks at the same time. The company also offers the integration of its handheld multi-purpose probes and air quality instrumentation with computer software, mobile device apps, and cloud-based platforms. The company serves such facilities as schools, hospitals, manufacturing plants, offices, and government buildings.
OMEGA Engineering Inc., founded in Norwalk, CT, in 1962 is a manufacturer of products used to measure temperature and humidity, flow and level, and pressure. The company's product portfolio includes thermocouple probes and assemblies, pressure gauges and switches, and air velocity measurement systems, wireless systems and portable optic sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company also offers customer services that include support, custom research projects and customized services.
Teledyne Technologies Inc., a company founded in 1960 and headquartered in Thousand Oaks, United States, is a manufacturer and supplier of advanced technology in the industry. The company specializes in providing innovative products and services in various industries such as aerospace, defense, environmental monitoring, and industrial applications. They offer a diverse range of products, including imaging sensors, instrumentation, aerospace components, and digital imaging systems. Their solutions are utilized for tasks such as remote sensing, scientific research, aerospace exploration, industrial testing, and environmental monitoring. The company also provides comprehensive customer support, including technical assistance, product training, and troubleshooting services.
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
Eagle Microsystems has a 50-year history and is based in Pottstown, Pennsylvania. Eagle Microsystems is a designer, engineer, and manufacturer of scales and weighing systems in a variety of configurations for water treatment and industrial environments. Eagle Microsystems product categories include cylinder/carboy scales, displays, controllers, analyzers, drum/tank scales, weighing systems, polymer feeders, ton container scales, volumetric dry feeders, and accessories. Eagle Microsystems offers engineering support for weighing systems, offering product development, and custom design and consulting for manufacturers, raw materials providers, and end users.
MSA Safety, founded in 1914, is a manufacturer and supplier of safety products such as self-contained breathing apparatus, flame detection systems, fall protection devices, and fire & rescue helmets that protect users from potentially dangerous or life-threatening situations while working in the oil, gas, and petrochemical industries, the fire service, mining, construction, and military. Cranberry Township, Pa., is the company's headquarters north of Pittsburgh, and it has manufacturing plants in the United States, Asia, Europe, and Latin America. MSA generates approximately half of its sales outside North America, with over 40 international sites.
RH Systems LLC, founded in 1998 and headquartered in Gilbert, Arizona, United States, is a designer, manufacturer, and supplier of custom temperature and humidity solutions. The company's products include SF6 gas analyzers, humidity generation instrumentation, and robust chilled mirror technology for on-site measurement of humidity, pressure, and purity in SF6 gas-insulated equipment. Its services include calibration, custom calibrations, and repairs for all customers. It primarily serves industries that include metrology and electrical power systems.
Sensidyne is an American manufacturer and distributor of industrial air monitoring and safety equipment founded in 1983 and acquired by the German company Schauenburg International GmbH in 2008. Based in St. Petersburg, Florida, the company offers various products including aerosol and heat stress monitors, sound and vibration measurement equipment, air sampling instrumentation, and gas detector tube systems. Sensidyne also provides additional OEM, in-house calibration, and maintenance services for clients requiring additional support.
RKI Instruments, Inc., established in 1994 and headquartered in California, United States, is a manufacturer and supplier of specialized gas detector solutions. The company's range of products includes portable multi-gas monitors, wireless gas detectors, and detector heads. Its multi-gas monitors could detect four types of gases, LEL, O2, H2S, and CO. The products are used to protect life and property from hazards of gas and vapors. It serves various industries, including oil and gas, water and wastewater, and chemical plants. It has passed the ISO 9001 certification that concerns quality management systems.
Ohio Power Tool, Inc was founded in Columbus, OH in 1983. OPT has 3 primary operating segments: sales, rental, and repair. Sales and rental segments include air compressors and other air tools, concrete & masonry saws, concrete core drills, cordless and electric corded tools, gas detection, generators, hand tools, hydraulic cylinders and pumps, inspection equipment, jobsite cleanup equipment, ladders and lifting equipment, levels, pipe cutting & threading equipment, as well as safety and storage equipment. The repair segment includes testing and recalibration and uses factory parts.
Exponential Power has roots dating back to 1915 and began with the merger of Storage Battery Systems and Summit Power Systems in 2014, and is now headquartered in Menomonee Falls, Wisconsin. Exponential Power is a distributor of stored power solutions, serving offshore, telecom, energy-services, utilities, energy, data centers, motive power, material handling, distribution, and manufacturing industries. Exponential Power provides batteries, battery backs, power systems, battery cabinets, UPS, as well as other products. Exponential Power offers services such as installation, maintenance, repair, and rental equipment.
AMETEK Land was founded in the UK in 1947, and acquired by the Process & Analytical Instruments Division of AMETEK, Inc in 2006, is a manufacturer of monitors and analyzers for industrial infrared non-contact temperature measurement, combustion efficiency, and environmental pollutant emissions. The company is a supplier of product application solutions to world industries including steelmaking, glass making, minerals processing, hydrocarbon processing, and thermal power generation. Aligned with their expert knowledge, they meet the challenges of a wide range of applications, delivering process safety and process control that the customers depend on.
GASTEC CORPORATION, established in 1970 in Kanagawa, Japan is a manufacturer and supplier of gas measurement systems. The company's product range includes Gas Detector Tube Systems, Detector Tubes, Gas Sampling Pump Kits, and Calibration Gas Generation Systems. These systems are crucial for environmental monitoring, safety control, and contamination testing. They predominantly serve sectors like firefighting, shipping, and residential monitoring. In addition, the company offers technical support, quality assurance, and calibration services.
Kane International Limited, established in 1954 and based in Welwyn Garden City, Hertfordshire, UK, is a manufacturer of fuel gas and engine exhaust analyzers. The company offers an extensive product portfolio including combustion probes, leak detectors, indoor air quality monitors, engine analyzers, and fuel gas analyzers, among others. These products are used for various applications, such as detecting leaks of combustible gases like methane, propane, and natural gas, performing safety checks on appliances, conducting sweep tests, and measuring carbon monoxide levels in indoor environments.
Esders GmbH, founded in 1989 as Esders Ingenieurbüro GmbH and based in Haselünne, Germany, is a manufacturer specializing in the development of measuring equipment, systems, and software solutions. The company's product lineup includes gas measurement technology, pressure regulators, and leak detection systems, supported by mobile applications and online portals for data recording. Notably, the company develops flare technology to prevent gas leakage and methane emissions in distribution networks, aligning with the European Union Green Deal objectives. The company also supplies leak detection systems for wastewater pipes and sewers, as well as clearance measurement tools for manhole inspections.
Beijing HiYi Technology Co., Ltd. , established in 2004 and headquartered in Beijing, China, is a manufacturer of laboratory scientific instruments. The company provides comprehensive solutions for gas and laboratory equipment testing, manufacturing products like laser methane detectors, domestic gas alarms, portable gas detectors, industrial fixed systems, and gas analyzers. It holds several certifications such as ISO9001:2008 and a medical device business license, while its products carry CE, TUV, ATEX, and RoHS certificates.
Prosense, established in 2006 and situated in Istanbul, Turkey, is a manufacturer of a wide array of ATEX/IECEx-certified gas detection systems. The company specializes in fabricating fixed gas detectors, car park gas detection systems, and gas control panels. Its fixed gas detectors have been designed to perform continuous measurements of combustible, toxic, asphyxiate, and VOC gases in the environment. Its car park gas detection systems are designed for continuously monitoring carbon monoxide, nitrogen dioxide, and LPG gases in enclosed car parks and tunnels.
Elektrotechnik Schabus GmbH & Co. KG, established in 1992 and headquartered in Stephanskirchen, Germany, is a water, gas, and smoke measuring and detecting sensor and equipment developer and manufacturer. The company's products include various smoke alarm devices, unsafe carbon dioxide level alarm devices, and water alarm systems. It also supplies exhaust and air conditioning controls and a range of accessories to enhance the capabilities of its detection and alarm systems, such as flashing lights, signal horns, and emergency power supply units. The company's products can be purchased by individual consumers and resellers from its online store.
Edinburgh Instruments Ltd., established in 1970, is a manufacturer of gas detection instruments and systems. The company is headquartered in Livingston, Scotland, with its products distributed in more than 20 countries. Edinburgh Sensors has developed microprocessor-controlled carbon dioxide sensors with digital displays, as well as non-dispersive infrared (NDIR) analyzers, to detect various gases for industrial applications. For example, in the agricultural industry, the company supplies a self-aspirating carbon dioxide monitor to optimize plant growth conditions. It also provides methane and carbon dioxide sensors in landfill gas disposal processes.
Acme Engineering Products Ltd., founded in 1956 and based in Montreal, Quebec Canada is a manufacturer of gas detection systems, strainers and electric boilers. The company specializes in manufacturing gas detection systems for building ventilation controls, automatic scraper-strainers for intake, process, and effluent filtration for large industrial and commercial setups. The company is an expert in custom designing and manufacturing electric boilers, superheaters, electrodes and auxiliary boilers. The products are largely used by production houses, oil and gas, defence and aerospace. The products are available in Canada, North America, China and India.
Compur Monitors GmbH & Co. KG, established in 1978 and headquartered in Munich, Germany, is a manufacturer of gas detectors. The company offers fixed and portable gas detectors that are compliant with SIL 2 safety requirements. Its products include stationary gas detectors like statox 560, statox 506, and statox 501 series. Its detectors are used in the chemical, food, and oil industries, as well as greenhouses, wastewater treatment, and machinery compartments. The company's instruments ensure precise measurement in LEL, ppm, and ppb ranges, detecting toxic, combustible gases and VOCs with catalytic, infrared, and electrochemical sensors.
Focused Photonics Inc. was established in 2002 with its headquarters in Hangzhou, China as a manufacturer of monitoring instruments. The company provides solutions for Environmental monitoring of air, water, and stack emissions along with Scientific Instruments for Mass Spectrometry, Chromatography, and Spectroscopy. There are also Industrial Process Analyzers for Gas Chromatography, Leakage Detection, and more. These instruments benefit Smart Cities, Industrial Parks, Oil & Gas, Cement, and Metallurgy industries. The Ecological Development department and the laboratories of Food, Medicine, and Life Sciences also avail the services of these products.
Beijing Zetron Technology Co, founded in 2006 and based in Beijing, China, is a manufacturer of gas detection solutions. Its product portfolio encompasses flue gas analyzers, electrician instruments, pipeline detection equipment, and non-destructive testing equipment. Additionally, it offers technical consulting services, engage in research and development, product design, and sales management. The company follows a rigorous quality assurance process that involves over 30 inspection points, from the parts library to the finished product leaving the factory, and holds ISO 9001 certification and battery certification.
Micro-Hybrid Electronic GmbH, established in 1992 and based in Hermsdorf, Germany, is a manufacturer of microelectronics and infrared sensors. It manufactures miniaturized and ceramic-based electronic circuits. It also specializes in manufacturing infrared sensors such as IR emitters, thermal IR detectors, pyroelectric IR detectors, gas sensors, and acceleration sensors. The manufactured products are equipped with several technologies like LTCC and SMD and chip and wire bonding technologies. Its manufactured products serve the industrial, medical technology, and mobility industries. Moreover, the company is involved in Research Cluster HIPS, KerMuSens, Thuringia-Invest, and GRW Joint task projects and has ISO / TS 16949:2009 certification.
Gasera Ltd., founded in 2004 and headquartered in Turku, Finland, is a developer and manufacturer of measurement equipment for analyzing gases, liquids, and solid materials. The company’s primary products support applications in air pollution control, greenhouse gas monitoring, and emissions analysis. Its products include the Gasera One GHG for monitoring methane and nitrous oxide, the Gasera One Shed for measuring ethanol and refrigerants, and systems for analyzing transformer oil. The company has notable clients that include Woods Hole Oceanographic, Bruker, and Ajinomoto.
Controlmatik ABW d.o.o., founded in 1979 and based in Domžale, Slovenia, is a manufacturer of dosing and safety equipment for water treatment. The company also provides engineering solutions for disinfecting drinking, swimming, and industry water and stocks products like automatic chlorinators, chlorine dioxide analyzers, and emergency shutoff systems. It has more than 1500 clients in over 40 countries worldwide, and all of its products are tested and comply with DIN 19606 standard. The company also designs and manufactures customized water disinfection mobile units and dosing stations that can be used in remote areas without electricity or during natural disasters.
Axetris AG, the microtechnology division of Swiss company Leister AG, is based in Kägiswil, Switzerland, as a manufacturer of gas sensing and micro-optics products since 1998. The company produces various microelectronics such as mass flow meters, laser gas detection modules, and low power consumption infrared sources. It also offers diffractive and refractive optical elements made of silicon and fused silica. The company provides additional wafer processing services, such as lithography and etching.
Invest Electronics Ltd., founded in 1990 and headquartered in Plovdiv, Bulgaria, is an electronics and appliance manufacturer. Since 1998, the company has been specializing in the production of Gas Sense-branded gas leak detectors and gas detection solutions for the monitoring and control of toxic, flammable, and refrigerant gases. The company offers heavy-duty ATEX-certified detectors for use in the oil and gas, hydrogen, and petrochemical industries, as well as a variety of modularly designed fixed gas detection systems for a range of industrial and commercial applications. Additionally, it manufactures gas detectors for residential use as well as portable carbon monoxide detectors.
Durag Group, established in 1948 and headquartered in Hamburg, Germany, is a manufacturer and supplier of combustion technology. The company's products include self-monitoring and fail-safe burner controls, rack-mounted condensation particle counters, and self-aspirating pilot burners with flame-front ignition. It provides solutions for process and environmental monitoring, combustion control and monitoring, and tunnel traffic monitoring. Its services include the supply of spare parts and consumables, product rentals, and customized operator training courses.
Rezontech Co. Ltd., established in 2004 and based in Korea, is a manufacturer of flame detectors. The company excels in hardware and software design, manufacturing disaster prevention facilities, safety management equipment, and unique fire fighting equipment construction. Its product range includes specialized flame detectors, cabinet-type fire extinguishing systems, and condensed fire aerosols. It also produces automatic gas suppression systems, safeguarding lives and assets in industries and military facilities from fire disasters. The company was awarded the Korea Fire Safety Award by KFI in 2015 and the Million Dollars Export Tower in 2016.
Ion Science Ltd is a manufacturer and supplier of advanced gas detection and monitoring instruments. With its establishment in 1989, the company is headquartered in Fowlmere, United Kingdom. Specializing in gas sensing technology such as gas and leak detectors, and sensors and components. Ion Science provides a range of products such as handheld gas detectors, fixed gas monitoring systems, and photoionization detectors. These instruments find applications across industries including environmental, industrial, and occupational safety. Ion Science's offerings include services like instrument calibration, technical support, and training, ensuring accurate and gas detection solutions for diverse industrial sectors.
Hanwei Electronics Group Corporation, established in 1998 in Zhengzhou, China, is a manufacturer of gas sensors, gas detection instruments, and industrial safety products. The product range includes portable gas detectors, fixed gas monitoring systems, gas sensor modules, and environmental monitoring equipment. These offerings provide accurate and optimal gas detection, ensuring worker safety and environmental protection in various settings. The portable gas detectors offer real-time gas monitoring and alarms, while fixed gas monitoring systems provide continuous surveillance in confined spaces. These products find applications in industries such as oil and gas, mining, chemical, and environmental monitoring.
Trotec GmbH is a German manufacturer of air treatment and climate conditioning machines and equipment that was established in 1994 as a subsidiary of TKL GmbH. Based in Heinsberg, North Rhine-Westphalia, the company produces air conditioners and purifiers, as well as heaters, dehumidifiers, and ventilators. It also offers equipment for measuring or monitoring various air conditions, including pressure, humidity and flow. Aside from its products, Trotec GmbH also provides rental, calibration, repair, and training services to its clients in the commercial and industrial sectors.
Nanjing AIYI Technologies Co., Ltd., founded in 2008 and based in Nanjing, China, is a manufacturer that combines R&D, production, and sales of optic-mechanical-electric products. The company’s product lines include portable gas detectors, fixed gas detectors, online gas analyzers, and dust monitors. It serves industries such as oil and gas, pharmaceuticals, chemicals, automotive, and water treatment. It is an SGS-certified and ISO:9001-2015 certified manufacturer, demonstrating its strict adherence to international standards for quality instruments.
Analytical Technology, Inc., established in 1992 and based in Pennsylvania, USA, is a manufacturer of engineered analytical sensor monitoring solutions for water quality and gas detection. With partner offices in Manchester, England, and connections with the Badger Meter group and s::can GmbH, the company offers a wide range of smart water instrumentation. Specializing in water quality monitors like MetriNet and SeptiNet, it also offers advanced gas detection products. Its products are used across the utilities, healthcare, and food and beverage industries. The company is devoted to sustainability and client-centric solutions and ensures optimal water management and superior water quality.
Hugo Brennenstuhl GmbH & Co, established in 1958 and based in Tübingen, Germany, is a manufacturer of power distribution products. The company produces products such as cable drums, extension cables, and socket strips with lights and LED site lights for smart homes and home automation areas. All the products produced are used in residential homes, workshops, buildings, and construction sites. The products produced undergo quality tests both in internal quality management and external independent tests that comply with German and international standards.
Wöhler Technik GmbH, established in 1932 and based in Bad Wünnenberg, Germany, is a manufacturer of measurement instruments. The company produces products such as gas analyzers, soots, inspection cameras, pipe cleaning devices, and temperature-measuring equipment. Apart from this, the company also produces measuring, inspection, and cleaning equipment for building services. Plumbers, chimney sweeps, and installers use the tools manufactured by the company. The company has five subsidiaries in different locations, such as France, the Czech Republic, Austria, Italy, and the Netherlands.
Cubic Sensor and Instrument Co. Ltd., founded in 2003 and based in Wuhan, China, is a manufacturer of gas sensors and sensor solutions and is ISO 9001 certified. It stocks products like spirometers, CO2 sensors, and gas analyzers that serve various fields, including air quality, environmental monitoring, and healthcare. It is a publicly listed company in the SSE STAR Market that has exported its products to more than 80 countries and has obtained more than 100 patents at home and abroad. It has also received ISO 45001, ISO 14001, and Automotive Tier 1 Supplier with IATF16949 certification.
Teledyne Gas and Flame Detection, founded in 1959 by Teledyne Oldham-Winter GmbH, is a manufacturer headquartered in Arras, France, developing end-to-end gas and flame detection solutions. The company adheres to ISO 13485 and the Waste from Electrical and Electronic Equipment (WEEE) directive, offering a range of detectors for fixed gas, area gas, and fixed flame detection. It also provides controllers, alarms, and measurement devices. These products are marketed under various brands, including Teledyne Detcon, Teledyne GMI, and Teledyne Oldham Simtronics. In addition, the company provides industrial and commercial installation services, along with calibration and maintenance programs.
Tork, established in 1985 and located in Istanbul, Turkey, is a manufacturer of industrial control valves and process automation systems. The company's products include fluid control systems such as solenoid valves, pneumatic actuators, pneumatic piston valves, pulse valves, and electric actuators. It also offers services related to fluid control systems and process automation solutions. Its product has a high flow rate, short open-close time, and less pressure drop. The company has been certified with the ISO 9001:2015 Quality Management System. It serves various industrial sectors such as food, iron, steel, chemical, petrochemical, and more.
S.A.M.A. Italia S.r.l., established in 1974 and headquartered in Viareggio, Italy, is a manufacturer of precision measuring and control instruments and calibration solutions. The product line includes an extensive range of options, such as flow meters, temperature sensors, pressure gauges, and calibration tools. These optimal-precision devices make it possible to precisely measure and regulate vital characteristics across an array of sectors, including petrochemical, manufacturing, automotive, and aerospace. The products' stability, accuracy, and longevity are essential to quality control and industry compliance in measuring and control solutions for organizations all over the world.
New Cosmos Electric, a company founded in 1934 and headquartered in Osaka, Japan, is a manufacturer and supplier of gas detectors and alarm systems. The company's product portfolio includes portable gas detectors, odor sensors, steel dust meters, air quality monitors, and gas detection and alarm systems. These products are utilized by various industries, including the energy industry, steel, construction, transportation, and livestock industries. The company is both ISO 14001 and ISO 9001 certified, with offices and distributors in the USA, Thailand, France, Europe, and Brazil.
Hansen Technologies, a subsidiary of Roper Industries, established in 1982 and headquartered in Illinois, USA, is a manufacturer of valves and components for industrial refrigeration systems. The company’s products include shut-off and solenoid valves, pressure-relief regulators, and safety detection systems. It also offers technical equipment such as level controls, defrost controllers, and motorized control valves. Its pop-eye Insight, which has a remote indication, provides real-time awareness of refrigerant release events. Its MVP multi-valve platform features MVP65-MVP100 valve station sizes with improved control functionality. The company’s anti-corrosion technology provides multi-layer protection and reduces maintenance costs through a standard installation.
Busch Vacuum Solutions was founded in 1963 in Virginia Beach, Virginia, US, as a manufacturer of vacuum pumps and systems, compressors, and blowers. The comprehensive product portfolio encompasses solutions tailored for vacuum and overpressure applications across diverse industries, such as chemicals, semiconductors, plastics, and food. The products have a wide array of applications, ranging from packaging food and sterilizing medical equipment to lifting substantial steel tubes. They also play a crucial role in combating diseases, addressing malnutrition, and facilitating the process of digitalization.
Rainbow Technology Co., Ltd, established in 2003 and based in China, is a manufacturer of MEMS gas sensors, new energy, and smart sensors. The products manufactured by this company are used in air purification, gas detectors, battery safety monitoring, medical ventilators, and hydrogen leak detection systems. The company has patents and holds ISO 9001 quality management certification. All the products manufactured by the company are compliant with RoHS and REACH environmental protection standards. The company develops hydrogen energy to meet safety, health, and safety conservation needs.
EPS Safety, established in 1973 and headquartered in San Jose, California, United States, is a designer, manufacturer, and supplier of emergency gas and flame detection systems. The company's products include combustible gas detectors, toxic gas detectors, and oxygen detector monitors. It also supplies dual infrared and ultraviolet light flame detectors and multi-channel controllers that offer maximum flexibility to users as a standalone, rack-mounted, independent control system. These products are used in various industries, such as mining and industrial chemical and petrochemical processing plants, to mitigate dangerous situations and worker safety.
Crowcon Detection Instruments Ltd., established in 1970 and based in Abingdon, England, is a manufacturer of detection instruments used in gas detection and is part of Halma. Its product portfolio includes portable gas detectors with single and multiple gas monitors, fixed gas detectors, and control panels designed to be interfaced with manual call points, gas detectors, and distributed control systems. The company offers installation and maintenance training to agents, distributors, and customers. It operates globally with offices in the USA, Singapore, and China, and its technical support team can help with calibration, finding a suitable detector, and creating technical notes.
Honeywell, founded in 1906, in Wabash, Indiana is manufacturer of automotive parts, building technologies, and performance and safety materials for aerospace, The company's product portfolio includes electronic guidance systems, cockpit instrumentation, lighting, automotive parts, and primary propulsion and secondary power turbine engines. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. Their headquartere is located in Carolina and they have global sales offices and distributions channels.
Sauermann Group, established in 1976 and headquartered in Belgium, is a global manufacturer and supplier specializing in the detection, measurement, and control of indoor air quality (IAQ). The company’s product portfolio includes condensate removal pumps, measuring instruments, and transmitters, serving industries such as HVACR, manufacturing, and air quality management. The company’s two main brands are Sauermann for condensate removal pumps and Kimo for instruments aimed at measuring and monitoring air parameters. With locations in France, China, and the U.S.A, Sauermann products and services are backed by multiple testing and calibration laboratories worldwide, and hold ISO 17025:2017 certification.
CENTER TECHNOLOGY CORP., founded in 1998 and headquartered in New Taipei City, Taiwan, is a manufacturer of handheld test instruments distributed worldwide. Its diverse product line includes Clamp Meters for current measurement, Gas Detectors to detect gases, Sound Level Meters for sound pressure measurement, Light Meters to gauge light intensity, and Thermometers for temperature measurement. Its adherence to producing quality test instruments has solidified its name globally in the field.
QED Environmental Systems, established in 1982 and headquartered in Dexter, Michigan, USA, is a manufacturer of environmental technology solutions. Its products serve various purposes, including groundwater and soil monitoring, gas management applications in medical and food industries, and control and monitoring systems for environmental and energy markets. Its products hold global electrical, mechanical, and environmental certifications, and are meticulously engineered and manufactured in controlled facilities, adhering to rigorous ISO standards to satisfy diverse codes and certifications like UL, CSA, EC, and ATEX based on specific applications.
Rembe GmbH, founded in 1973 and headquartered in Berlin, Germany, is a manufacturer of customized safety solutions across various industries. The company's key products include the KUB buckling pin reverse bursting disc, flameless pressure relief technology, and specialized safety concepts. These products are used by industries to ensure equipment and system safety, complying with both national and international standards. The company also offers on-site support, consulting, and continuous product innovation through its global network of subsidiaries and sales partners.
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
AMETEK Process Instruments, was founded in and is currently headquartered in Pittsburgh, Pennsylvania as a business unit of the Process & Analytical Instruments division of AMETEK, Inc. The company is a manufacturer and engineer that serves customers in markets such as power generation, pollution monitoring, glass manufacturing, semiconductors, and fuel cell research. The company designs analyzing equipment for customer-specific applications. The company manufactures under brands such as Chandler Engineering which produces gas gravitometers, Process Instruments, THERMOX, Trace Analytical, and Western Research.
Vtech, established in 2008, and headquartered in Greensboro, Georgia, is a manufacturer and supplier, providing cooling solutions. Their product portfolio includes industrial cooling systems, refrigeration units, and HVAC equipments. These products find applications in sectors such as food and beverage, pharmaceuticals, data centers, and manufacturing. Their solutions provide efficient temperature control and preservation for products and working environments. Their cooling solutions enhance operational efficiency, product quality, and equipment longevity in diverse industrial applications.
NPP SENSOR LLC, founded in 1992 and headquartered in Zarechny, Russia, is a manufacturer and supplier of instruments and systems for explosive media control. The company’s product portfolio includes SENS measurement systems, solenoid valves, and information indicator boards. These products find ideal applications in various industries, including chemical manufacturing, transportation and logistics, and the oil and gas industry. The company also offers customer support and services such as customization, operation manuals, and detailed product catalogs, and it is ISO 9001:2015 certified for its quality management system.
Shinohara Electric Co.,Ltd., headquartered in Osaka, Japan is a manufacturer and distributor of electrical and mechanical parts for distribution boards and control panels founded in 1961. The company’s product portfolio includes ventilating louvers, heaters, window frames, earthing products, and insulating & metal supporters. The company also supplies various gas detectors in Japan including VOC detectors manufactured by Honeywell Group. They have completed ISO9001, ISO14001 and JISQ 9100 certifications to allow their products to be used for aerospace, railway, data centers, and household applications.
SEITRON S.p.A. a socio unico, founded in 1981, is an Italian manufacturer specializing in thermoregulation, residential and industrial gas detectors, and combustion and emissions analyzers. The company offers a wide range of products, including programmable thermostats, climate regulators, solar plant controllers, and residential and industrial gas detectors. It also provides various combustion analyzers and refrigeration tools. Strongly rooted in Italy, it is also present throughout Europe, Asia, America and Oceania. It exports to more than 60 countries around the world, thanks to its extensive network of agents and distributors.
HCTE PTE. LTD. is an ISO 9001-certified manufacturer and supplier of industrial testing equipment that was established in Singapore in 2000. The company primarily produces performance testing and leak detection equipment for use in air quality management applications. These products include air tightness testing equipment, helium leak detectors, and auto filter testing equipment for oil or air filters. It also offers custom manufacturing and product testing services for unique projects. The company chiefly serves clients in Asia’s automotive, refrigeration, and HVAC industries.
Schütz GmbH Messtechnik was established in 1968 and is a manufacturer and supplier of gas measuring devices based in Lahr Schwarzwald, Baden Wurttemberg, Germany. The company manufactures various equipments such as gas pipe network inspectors, gas detection devices, and indoor pressure measuring devices. These products are used in various applications such as biogas plant inspection, tracer gas leak detection, and automobile tightness test. The company has obtained the ISO 9001:2008 standard certification for the quality management system.
Eagle Technical Products Ltd, established in 2002 and headquartered in Manchester, UK, is a manufacturer and supplier of protective workwear for industrial markets. The company offers a range of safety products such as firefighter gloves, boots, and undergarments. These products are used by firefighters globally to provide maximum protection against heat and flame hazards. Its products meet various certifications, including Module D certification, ISO 9001 quality management systems, and ISO 14001 environmental management systems.
Autotronic Enterprise Co., Ltd., founded in 1980 and headquartered in New Taipei City, Taiwan, is a manufacturer and distributor of transmitters designed for indoor air quality monitoring. The company offers an extensive product catalog, which includes indoor air quality sensors, environmental transmitters, and water analysis sensors. These products are utilized in various applications such as providing continuous liquid level measurements based on radar technology and ensuring liquid quality measurements and chemical monitoring, including pH analysis, to comply with environmental protection standards.
ASCO CARBON DIOXIDE LTD, established in 1975 and headquartered in Romanshorn, Switzerland, is a global provider and manufacturer of complete CO2 and dry ice solutions. The company offers a various products including automatic dry ice production machines, CO2 production and recovery plants, and dry ice blasting equipment. These products are used for a range of applications, such as dry ice production, CO2 recovery from various industrial processes, and surface cleaning without leaving chemical residues. Its quality management has been certified according to DIN ISO 9001:2015 by the Swiss Association for Quality and Management Systems (SQS).
Sibata Scientific Technology Ltd, founded in 1921 at Saitama, Japan is a manufacturer of environmental measurement and occupational health measurement equipment. The company with global clientele produces various scientific measurement and analysis equipment that can range from lab glassware to synthetic reactors. The products line comprise of general lab equipment, extractor, synthetic reactor, Rotary Evaporator and Glass tube oven. These products are used in applications such as occupational safety, food hygiene, water hygiene, hospital and chemical plants as well. The products are ideal for testing quality, measuring dust, precise heating & cooling, personal exposure measurements and many more with more reliability.
Linde PLC is based in Danbury, Connecticut, USA, and is a manufacturer of gasses for the industrial sector established in 2018 following the merger of Praxair, Inc. and Linde AG. The company primarily offers various gasses such as argon, hydrogen, and nitrogen for use in industrial processes. It also offers products from these gasses including surface coatings, sputtering targets, and metal powders for enhancing component or material performance in different environments. The company is ISO 9001, ISO 14001, and ISO 45001-certified and operates internationally, with locations and partner distributors in over 100 countries.
Smiths Detection Group Ltd., established in 1950 and headquartered in London, United Kingdom, is a threat detection screening solutions developer, manufacturer, and end-to-end B2B supplier. The company's products include checkpoint screening and management platforms, explosives detection systems, and ruggedized hand-held fourier transform infrared (FT-IR) identifiers for solid and liquid chemicals. These devices are used in commercial buildings, airports, and mail rooms, among many other locations, to detect such threats as bombs, narcotics, and deadly chemicals. The company provides custom system production and installation, as well as maintenance programs and operator training.
United Electric Controls is an ISO 9001-certified manufacturer of safety and control products for process equipment that was founded in 1931 in Watertown, Massachusetts, USA. The company produces detectors, switches, and measurement instruments that can be designed to integrate into existing systems, or function separately. These include electronic pressure switches, gas detectors for monitoring combustible or toxic gasses, and process temperature maintenance products with emergency shutdown features. The company also offers additional product repair, engineering, and calibration services.
YZ Systems, established in 1949 and headquartered in Texas, United States, is a global manufacturer of industrial gas and liquid processing equipment. The company offers DynaPak electronically controlled natural gas samplers, odorant injection system, and NJEX. These products are used in various industries such as natural gas transmission and distribution, petrochemical and refining, and water conditioning and treatment. These are designed to deliver a representative sample of crude oil, natural gas or light liquids.
Grundfos is a manufacturer and supplier of pumps and related products that was established in Bjerringbro, Denmark in 1945. The company mainly produces various pumps including circulator, centrifugal, and submersible models, as well as pump systems such as sensors and controllers. It also offers related accessories including valves, pipes and tanks. The company’s products are commonly used by clients in water utilities, building services, and facilities management, as well as in industrial processing operations.
HENGKO Technology Co., Ltd., established in 2001 and headquartered in Shenzhen, China, is a manufacturer and supplier specializing in sintered metal filters, temperature and humidity monitors, sensors, and probes. The company offers a range of products, including porous metal flow restrictors, sintered powder metal filters, gas sensor probe assemblies, handheld humidity temperature meters, dew point sensor transmitters, and more. These products are applicable across various sectors, including cold chain transport, electronic equipment production lines, medical automation, humidifiers, and more. The company's clientele includes brands such as Solvay, Foxconn, Great Wall, Honeywell, and Wuxi Apptec.
Klein Tools is a fifth-generation family-run producer of hand tools founded in 187 and headquartered in Lincolnshire, Illinois. Klein Tools sells worldwide directly and through distributors. Klein Tools has a family of companies under its brand including Alco, Civitella, Mumme Tools, Tulmex, and Wattmaster. Klein Tools serves several industries including construction, HVAC/R, plumbing, telecom, municipal, and industrial. Some of the tools Klein Tools produces include non-contact voltage tester bens, multi-bit screwdrivers, digital circuit breaker finders, advanced circuit tracer kits, and multi-bit electronics screwdrivers.
Fives, founded in Paris, France, in 1812 is a of manufactures machines and process equipment. The company's product portfolio includes CNC machines, milling machines, lathes, and grinders that are used in reactors, heat exchangers, filtration systems, mixers, and other bespoke solutions. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company provides services such as Product Selection Guidance, Engineering Support, New Product Design and Development and Custom Manufacturing.
Inspector Tools, founded in 1999 and based in Ventura, California, is a distributor and supplier of test equipment catering to sectors such as facility maintenance, building inspection, and energy conservation. The company maintains a diverse inventory featuring products from over 20 brands, including Extech Instruments, Met One Instruments Inc., and General Wire Spring Company. Offerings range from home inspection kits to carbon monoxide detectors and infrared cameras. Inspector Tools provides customers with an online catalog showcasing its entire product range. Additionally, customers can create digital accounts for faster checkouts and access to order history.
Bercu, founded in 1951 and based in Antwerp, Belgium, is a supplier of automotive instruments. The company supplies a wide range of products including calibrators, temperature simulators, infrared thermometers, panel meters, multimeters, and more. The company provides calibration and repairs for both handheld and control instruments as well as performing traceable calibrations on all types of instruments and devices. It also carries out calibrations for pressure gauges, ammeters, thermometers, tachometers, and other devices.
Hermann Sewerin GmbH was established in 1908 and is headquartered in Gutersloh, Germany is a supplier of water and gas leak detection equipment. The company offers an array of products including biogas and landfill survey systems, gas leak detection instruments, and pipe and cable location products. These products have various applications, including quantifying gas leaks in natural gas distribution networks, tracing telecommunication and cable television wires and cables, and monitoring water networks for early detection of water leaks.
Vasthi Instruments, founded in 2009 and headquartered in Hyderabad, India, specializes in manufacturing measuring and safety instruments for industries such as thermal power, petrochemicals, and steel. Specializing in reliability and precision, the company's main products include industrial safety systems, gas analyzers, and quality monitoring equipment. These tools are used by process industries to ensure safety, efficiency, and compliance with local, regional, and national regulations. The company also provides full onsite installation, ongoing maintenance, and repair services.
Eagle Eye Power Solutions, founded in the United States in 2023, is a global supplier of critical DC power solutions and services. It offers a variety of products, including battery monitoring systems, battery data analysis, discharge testing, DC power systems, and NERC PRC-005-6 compliance. The company also provides services such as critical power education, solutions, and compliance for clients in various industries, including utilities, data centers, government and defense, green energy, and motive power.
Hello BOM is an online electronic component storefront designed to bridge customers and suppliers. Customers supply Hello BOM with their bill of materials (BOM) and Hello BOM uses smart analysis via AI data matching to quickly find precise matches that customers need. This is accomplished via Hello BOM’s growing component stock and product information database to grow increasingly accurate and fast, while also simplifying the process of R&D and purchasing for customers. Products include semiconductors, resistors, capacitors, diodes, inductors, connectors, transistors, and sensors.
Ranking as of November 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | SAE Manufacturing Specialties Corp |
2.6%
|
2 | Global Detection Systems Corp. |
2.3%
|
3 | Danfoss Industrial Automation |
2.1%
|
4 | Eagle Microsystems, Inc. |
2.1%
|
5 | Bruker Corporation |
2.0%
|
6 | Teledyne Technologies Inc. |
1.9%
|
7 | Omega Engineering, Inc. |
1.8%
|
8 | Emerson Electric Co. |
1.7%
|
9 | GOW-MAC Instrument Co. |
1.6%
|
10 | AMETEK Process Instruments |
1.6%
|
Derivation Method
The ranking is calculated based on the click share within the gas detector page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
United States of America | 20 | 29.0% |
Germany | 11 | 15.9% |
China | 7 | 10.1% |
United Kingdom | 6 | 8.7% |
Japan | 4 | 5.8% |
Turkey | 3 | 4.3% |
Canada | 2 | 2.9% |
Switzerland | 2 | 2.9% |
Italy | 2 | 2.9% |
USA | 1 | 1.4% |
Finland | 1 | 1.4% |
Slovenia | 1 | 1.4% |
Bulgaria | 1 | 1.4% |
Republic of Korea | 1 | 1.4% |
France | 1 | 1.4% |
Russia | 1 | 1.4% |
Singapore | 1 | 1.4% |
Taiwan | 1 | 1.4% |
Ireland | 1 | 1.4% |
Australia | 1 | 1.4% |
Egypt | 1 | 1.4% |
36 products are listed.
Testo SE & Co. KGaA
140+ people viewing
Last viewed: 8 hours ago
The gas leak detector of the testing is all portable, and is used to carry the fuel, refrigerant gas leak from the gas pipe and the CO/CO2 concentr...
Testo SE & Co. KGaA
140+ people viewing
Last viewed: 2 hours ago
Testo 316-3 is a refrigerant gas detector required for maintenance of refrigeration air conditioning equipment. It corresponds to most of the gener...
New Cosmos Electric
60+ people viewing
Last viewed: 19 hours ago
It is a pocket size and mounting gas detector that protects the worker. <Series model> ◆ XO-2200 oxygen meter ◆ XC-2200 carbon monoxide meter ◆ XS...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
A type of combustible gas detector used in the hand. ・ Portable -type combustible gas detector that detects a very small amount of gas leaks ・ Expl...
New Cosmos Electric
140+ people viewing
Last viewed: 8 hours ago
A type of combustible gas detector used in the hand. <Forgiving combustible gas leakage, explosion risk, and anti -oxygen prevention> ・ Explosion ...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
A small amount of gas leak from the underground burial is detected with a cart type. Because the handle is contracted, it can be stored compactly a...
New Cosmos Electric
160+ people viewing
Last viewed: 10 hours ago
A type of combustible gas detector used in the hand. ・ Shock resistance structure that is resistant to impact such as falling ・ Essential safety ex...
New Cosmos Electric
50+ people viewing
Last viewed: 10 hours ago
It is a combustible gas detector of a wearing type. The target gas can be specified from methane, isobutan and hydrogen. To prevent explosive acci...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
It is a mulch -type gas detector. Four gases (methane or isobutan), hydrogen sulfide, carbon monoxide, and oxygen can be simultaneously detected an...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
A type of combustible gas detector used in the hand. ・ Portable -type combustible gas detector that detects a very small amount of gas leaks ・ Expl...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
A portable type multi -type gas detector. Simultaneous measurement and simultaneous display of four types of gases: oxygen, flammable gas, hydroge...
New Cosmos Electric
50+ people viewing
Last viewed: 17 hours ago
It is a semiconductor material gas detector used in the hand. By replacing the sensor unit, it is possible to support various semiconductor materia...
New Cosmos Electric
70+ people viewing
Last viewed: 6 hours ago
It is a pocket size and mounting gas detector that protects the worker. <Series model> ◆ XO-2200 oxygen meter ◆ XC-2200 carbon monoxide meter ◆ XS...
New Cosmos Electric
50+ people viewing
Last viewed: 18 hours ago
It is a pocket size and mounting gas detector that protects the worker. <Series model> ◆ XO-2200 oxygen meter ◆ XC-2200 carbon monoxide meter ◆ XS...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
A small amount of leakage of semiconductor material gas (Alcin, Hosphin, Joboran, Sylan, hydrogen) is detected and the leak is quickly detected. F...
SANKO ELECTRONIC LABORATORY CO.,LTD
40+ people viewing
Last viewed: 18 hours ago
■ Features ・ Essential safety explosion -proof structure. The protection grade is equivalent to IP67. ・ Boza -lamp flashing ・ Warning by vibrati...
New Cosmos Electric
70+ people viewing
Last viewed: 10 hours ago
A type of combustible gas detector used in the hand. Prevention of flammable gas explosion and anti -oxygen deficiency ・ Explosion -proof structur...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
Equipped with Bluetooth, you can display concentration / trend graphs with a smartphone / tablet app. In addition, it is possible to set an automat...
New Cosmos Electric
60+ people viewing
Last viewed: 4 hours ago
It is a pocket size and mounting gas detector that protects the worker. <Series model> ◆ XO-2200 oxygen meter ◆ XC-2200 carbon monoxide meter ◆ XS...
New Cosmos Electric
80+ people viewing
Last viewed: 18 hours ago
A type of combustible gas detector used in the hand. ・ Portable -type combustible gas detector that detects a very small amount of gas leaks ・ Expl...
New Cosmos Electric
70+ people viewing
Last viewed: 19 hours ago
It is a pocket size and mounting gas detector that protects the worker. <Series model> ◆ XO-2200 oxygen meter ◆ XC-2200 carbon monoxide meter ◆ XS...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
Simultaneously measure city gas (13A), methane, LPG, and other flammable gases, and identify whether it is a leak gas or other gas (natural generat...
New Cosmos Electric
60+ people viewing
Last viewed: 18 hours ago
It is an open -pass gas detector that detects the concentration of hydrocarbon gas between the infrared floodlight part and the light receiving por...
Krone Co., Ltd.
60+ people viewing
Carbon monoxide transmitter -CMT is a CO gas detection device featuring user -friendly comfort and high accuracy. Ideal for parking lots and tunnel...