All Categories
This section provides an overview for acceleration sensors as well as their applications and principles. Also, please take a look at the list of 35 acceleration sensor manufacturers and their company rankings. Here are the top-ranked acceleration sensor companies as of December, 2024: 1.Dytran Instruments, Inc., 2.Analog Devices, Inc., 3.Micro-Hybrid Electronic GmbH.
Table of Contents
Categories Related to Acceleration Sensors
Department of Chemistry, Graduate School of Science, Tohoku University (Master of Science)
As a display engineer, engaged in Seiko Epson Corporation, Sony Corporation, Japan Display Corporation, etc.
https://researchmap.jp/tanakachihiro
https://www.linkedin.com/in/chihiro-tanaka/
An acceleration sensor is a sensor that measures acceleration.
Acceleration is the increase in velocity per unit of time. In physics, acceleration is an important parameter that can exert a force on an object.
An acceleration sensor can be broadly classified into capacitive, piezoelectric (piezoresistive), and thermal sensing methods. There are differences in the acceleration that can be detected by the sensors of each method. The capacitive method can detect gravitational acceleration, while the piezoelectric (piezoresistive) method cannot.
Acceleration sensors are used to measure acceleration simply as well as to measure other parameters via acceleration. Uses for the former include sensors built into smartphones and portable game consoles, sensors for shock detection to activate car airbags, and other sensors such as seismometers. The latter include inclinometers and pedometers that use capacitance method acceleration sensors capable of detecting gravitational acceleration.
Acceleration sensors are broadly classified into capacitance method, piezoelectric (piezoresistive) method, and thermal sensing method. The basic principle of each method is the same: the sensor is divided into a fixed part and a flexible part. When acceleration is applied to the accelerometer, the flexible part deforms.
The difference between the fixed part and the deformed flexible part is detected by the element, and the acceleration is measured. In the capacitance method, each of the fixed and flexible parts has an electrode. The configuration of the sensor is a comb-like array of alternating fixed and flexible parts with electrodes.
Since the capacitance between the electrodes of the fixed part and the flexible part changes when acceleration is applied, the acceleration can be determined from the amount of change. Figure 1 shows an example of a pedometer that detects gravitational acceleration using a 3-axis acceleration sensors.
(a) is the data directly measured by the sensor and represents the time series data of the acceleration of the body's center of gravity when the pedometer is attached to the proper position of the pedestrian. This data contains gravity acceleration as a low frequency (DC) component, and by applying a low-pass filter, only the gravity acceleration is extracted, as in data (b).
At the same time, by applying a bandpass filter to data (a), data (c) is obtained by removing the low-frequency gravity acceleration component and the high-frequency noise component. Data (b) and (c) are time-series data in the three axes (x, y, z), respectively, and if the orientation of the sensor changes during walking (measurement), the values detected in each axis will also change.
Here, by taking the inner product of the data (b) and (c) (i.e., the inner product of 3D vectors) at each time, it is possible to obtain time series data of the gravity direction component (one axis) of the body center of gravity acceleration, as shown in data (d).
In this way, the gravity direction component of the pedestrian's acceleration can be obtained, regardless of the orientation of the sensor, in positive projection to the gravity acceleration, i.e., the vector quantity is converted to a scalar quantity, and based on this data (d), the walking pitch and number of steps can be calculated.
The piezoelectric (piezoresistive) method uses a piezoelectric element to measure acceleration. The piezoelectric element generates an electric current when it is deformed by acceleration. The generated current is measured as acceleration.
One sensor that has a similar performance to acceleration sensors are gyro sensor. Here, we will explain the difference between accelerometers and gyro sensors.
As the name suggests, acceleration sensors are used to measure acceleration. Gyro-sensors, on the other hand, are designed to measure angular velocity. Which means that the physical quantities they detect are different.
Gyro-sensors use the Coriolis force to detect the orientation and posture of an object, which is then output as an electrical signal. They are used when measuring the tilt of an object and are installed in a wide variety of electronic devices such as car navigation systems, digital cameras with image stabilization, smartphones, and game consoles.
Combining acceleration sensors with a gyro sensor can also be used to measure the motion of an object in more detail. For example, a car navigation system, one of the most popular in-vehicle products, uses a combined sensor technology.
The gyro sensor can determine the direction of the car, and the acceleration sensors can determine the distance traveled, making it possible to accurately display the current location even in places where radio waves are difficult to reach, such as in tunnels.
To use acceleration sensors to realize the desired application, the required measurement range or frequency bandwidth must be confirmed in advance. For example, if acceleration sensors are to be mounted on a game console controller, it must have a measurement range that exceeds the required range, assuming that the user will be shaking the controller to operate it.
Once the appropriate acceleration sensors for the measurement target are determined, the sensor is wired, and the measurement program is created. At this point, the "parameter setting" is important. In the parameter settings, you can change the sensitivity of the sensor, the 0g (zero gravity acceleration) output level, and so on. If these are not set appropriately, it will be difficult to realize the desired application.
*Including some distributors, etc.
Sort by Features
Sort by Area
Comus International, a company founded in 1978 and headquartered in New Jersey, United States, is a manufacturer of electronic and electromechanical products. The company offers a wide range of products that include proximity sensors, tilt and tip-over switches, and solid-state relays. These products are used in various industries, including automotive, aerospace, and industrial automation for applications such as motion sensing, position detection, and safety control systems. The company also offers customer services that include technical support and assistance to meet customers’ requirements.
Founded in 1980, Dytran manufactures high-quality dynamic testing solutions from its 45,000-square-foot facility in Chatsworth, California. Dytran designs and manufactures innovative sensors, accelerometers, and associated electronics for measuring dynamic force, pressure, and vibration. The company offers a wide range of product lines, with full in-house customization capabilities to provide customers with a one-stop shop for test and measurement requirements. Dytran's specializations include designing single-axis and triaxial IEPE accelerometers, ultra-high temperature charge mode sensors, pressure sensors, and digital bus-based sensors. Dylan is reputed for its sensor technologies for both product development testing and embedded solutions.
Incorporated in 1965, Analog Devices, Inc. designs, manufactures, tests, and markets integrated circuits (ICs), software, and subsystems that leverage analog, mixed-signal, and digital signal processing technologies. The company provides data converter products, power management and reference products for power conversion, driver monitoring, sequencing, and energy management applications in the automotive, communications, industrial, and high-end consumer markets. In addition, the company provides digital signal processing and system products for high-speed numeric calculations. It serves clients in the industrial, automotive, consumer, instrumentation, aerospace, and communications markets.
ifm efector (ifm) is a subsidiary of ifm electronic, founded in Germany in 1969. ifm has developed, manufactured and marketed sensors and controls technology to industries that include assembly and robotics, automotive, material handling, metal forming, mobile equipment, plastics, and food and beverage. Ifm produces sensors, condition monitoring equipment, image processing, safety technology, industrial communication, IO-link, systems for mobile machines, displays, software, connection technology, voltage supplies, as well as other accessories.
Pepperl+Fuchs, Inc. was founded in Mannheim, Germany in 1945 developing the forerunner of the proximity switch. Pepperl+Fuchs continues to develop proximity sensors as well as other industrial sensors including ultrasonic sensors, rotary encoders, positioning systems, display and signal processing, vibration monitoring, industrial communication, and signal processing as well as related accessories and software. Explosive protection products include safety barriers, surge protection, wireless solutions, HMI systems, power supplies, electrical explosion protection equipment, level measurement, and related software.
SignalQuest, a company founded in 1997, and based in New Hampshire USA, is a manufacturer, supplier and designer specialized in the production of innovative electronic sensing machines. The company offers a diverse range of products, including zero power tilt, inclinometers, shock and vibration sensors. These sensors find applications in industries such as aerospace, automotive, industrial automation, and robotics. Their sensors provide critical data for monitoring and control systems, enabling accurate measurements of inclination, and acceleration. The company also offers technical support to assist customers with product selection, integration, and troubleshooting.
Silicon Designs, a company founded in 1983 and located in Bellevue, Washington, USA, is a manufacturer and supplier of. micro-electro-mechanical system inertial sensors, modules, and accelerometers. The company offers a wide range of products, including accelerometers, data acquisition systems, and accessories. These sensors find applications in industries such as aerospace, automotive, energy, and industrial monitoring. They provide measurements of acceleration, inclination, and rotational motion. The company also offers technical support, warranty, and customized customer services.
Micro-Hybrid Electronic GmbH, established in 1992 and based in Hermsdorf, Germany, is a manufacturer of microelectronics and infrared sensors. It manufactures miniaturized and ceramic-based electronic circuits. It also specializes in manufacturing infrared sensors such as IR emitters, thermal IR detectors, pyroelectric IR detectors, gas sensors, and acceleration sensors. The manufactured products are equipped with several technologies like LTCC and SMD and chip and wire bonding technologies. Its manufactured products serve the industrial, medical technology, and mobility industries. Moreover, the company is involved in Research Cluster HIPS, KerMuSens, Thuringia-Invest, and GRW Joint task projects and has ISO / TS 16949:2009 certification.
Founded in 1944, Rion Corporation, based in Tokyo's Kokubunji City, is a precision equipment manufacturer. It specializes in three main sectors: environmental measurement instruments for noise and vibration analysis, medical equipment for hearing tests and hearing aids, and particle counters for semiconductor and pharmaceutical cleanliness measurement. Rion boasts significant market share in Japan, driven by its advanced technology and service excellence. In environmental measurement instruments, it offers noise meters, vibration meters, and frequency analyzers. In 2022, Rion expanded its environmental division by acquiring Norsonic AS, a prominent noise meter manufacturer. The company caters to diverse customers worldwide, including government agencies, research institutions, manufacturing industries, and R&D departments. With eight subsidiary companies (five in Japan and three overseas) and a global agent network spanning approximately 60 countries, Rion Corporation maintains a strong global presence.
Hokuriku Electric Industry Co. LTD., founded in 1943 and headquartered in Toyama, Japan, is a manufacturer and supplier of electronic components. Some of its products include circuit modules, fixed resistors, printed circuit boards, variable resistors, and NTC Thermistors, and it has eight domestic affiliate companies and 11 overseas affiliate companies, including HDK America Inc., and HDK China Ltd. The company is ISO 14001 certified, and it is working on producing products that are RoHS compliant. Its net sales for the 2022 fiscal year were 45.46 billion Japanese Yen, which was a 5.01 billion YoY increase from 2021.
Continental Automotive World (CAW) is a German manufacturer of passenger as well as industrial vehicle systems and related products that was established in 2012 as a subsidiary of Continental AG. Based in Hannover, Lower Saxony, the company offers products and solutions for various vehicle classes, including powertrain technologies, brake systems, sensors, cameras, and displays. It also develops and produces driver assistance solutions, such as vehicle-to-everything communication, cybersecurity, and artificial intelligence systems. CAW products are primarily used by automotive manufacturers, mobility service providers, and public authorities in Germany and overseas.
Transtron Inc. is a manufacturer of control units and in-vehicle information systems headquartered in Yokohama, Japan and established in 1990 as a joint venture between Fujitsu Limited and Isuzu Motors Limited. The company’s products are used for controlling vehicle functions, logging performance data, and supporting in-vehicle features such as navigation or safety diagnostics. It also offers vehicle networking systems that can connect vehicles either with each other or external networks, and sensors that can detect vehicle height or acceleration. The company serves clients in the industrial, transportation, and automotive sectors.
MOBA Mobile Automation AG, established in 1972, with its headquarters located in Limburg, Germany, is a manufacturer of technologically advanced solutions for mobile automation in various industries. Products range from unique options for construction equipment to those for waste management and agriculture. Products and services provided encompass electronic control units, sensors, leveling devices, and computer software. Product benefits include increased efficiency, accuracy, lower operational costs, and safer mobile machinery. Construction industry, agriculture, waste management, and the transportation maintenance industries all benefit from these solutions, which are helpful equipment for improving efficiency and effectiveness.
Epson Europe Electronics GmbH has been a manufacturer and supplier of electronic devices and components since 1989 and is based in Munich, Germany. The company's product portfolio includes quartz crystal devices, semiconductor devices, and sensing systems. The quartz crystals which are also known as timing devices are further subcategorized into crystal units, Oscillators, and real-time clock modules. The semiconductors have sues as Microcontroller, Display controllers, and for small network connecting, whereas the sensing systems provide solutions for accuracy, noise control, power consumption, and stability. These products have uses in Automotives, Industrial networking and healthcare, fitness, and energy control solutions.
NXP was established in 2006 as a spinoff from Phillips and is headquartered in Eindhoven, Netherlands. The company is a co-founder of NFC communication and designs and manufactures semiconductors that serve the automotive, industrial, mobile, and smart home industries. The company’s automotive products include driver assistance transceivers, sensors, and security systems. For industrial markets, the company produces RFID readers, processors, and microcontrollers. For communication infrastructure, the company produces RF mixers, diodes, and low-noise amplifiers for wireless LAN networks. The company also produces peripherals, power management chips, communications chips, and interface devices.
Silan Microelectronics Co., Ltd., founded in 1997 in China, is a manufacturer of semiconductor microelectronics-related products for commercial, industrial, and military clients. The company's products include ICs, power modules, discrete devices, MCU/IC power semiconductor solutions, MEMS sensors, and optoelectronic products. Silan Microelectronics Co., Ltd. also specializes in LED chip manufacturing and packaging for indoor and outdoor LED display panels as well as LED illumination applications. The company was listed on the Shanghai Stock Exchange in 2003.
Bosch Sensortec GmbH, established in 2005 in Germany, is a manufacturer of microelectromechanical systems (MEMS) technology for commercial, original equipment manufacturer, and industrial clients. The company has numerous engineering and sales locations across the globe, assisting clients with the acquisition of the company's product portfolio, which includes 3-axis acceleration, gyroscope, and geomagnetic sensors, integrated 6- and 9-axis sensors, environmental sensors, and a comprehensive software portfolio. Bosch Sensortec GmbH's products are used in commercial products, including smartwatches, smart clothes, drones, robots, and VR devices.
MEMSIC, established in 1999 and headquartered in Andover, Massachusetts and with R&D institutions in China and Europe, is a manufacturer and supplier of inertial sensors. The company’s product portfolio is composed of hall switches, thermal accelerometers, AMR magnetometers, capacitive accelerometers, and 6-Axis IMU, which are used for various applications such as industrial, medical, wearable, automotive, and consumer electronics. They offer hall switches with unipolar, bipolar and omni-polar output modes and an operation voltage range of 1.65 to 5.5Volts allowing them to qualify for different supply voltages.
Innalabs, established in 2012 and based in Dublin, Ireland, is a manufacturer and supplier of inertial sensor technology. The product portfolio includes specific solutions for Coriolis vibratory gyroscopes and quartz servo accelerometers with high-accuracy navigation and stabilization. The products are used in various industries which include space, aerospace, land applications, marine, energy, transportation, and new technology markets. The company also offers world-class research, technial and development facilities with full product cycle solutions and inertial systems.
Murata Manufacturing Co., Ltd. (Murata Manufacturing) was founded in 1944 and is headquartered in Nagaokakyo, Japan. Murata Manufacturing designs, manufactures, and sells ceramic-based passive electronic components and solutions globally. The company operates through components, modules, and others segments, serving communications, mobility, industrial, healthcare, and personal electronics customers. They company's product offerings include noise suppression products, quartz devices,RFID devices, phase shifters, and wireless connectivity platforms. Services such as webinars and video library are also available for existing and potential customers alike.
SENSATEC Co. Ltd., established in 1988 and based in Kyoto, Japan, is a manufacturer and supplier of OEM sensors. The company specializes in crafting electronic detection and control devices, medical tools, and beauty equipment, including various sensors, A/D/D/A converters, and optical fiber data systems. Its diverse product range also includes cable and coil winding processing, and it provides support for metal mask manufacturing. The company also offers tailored designs emphasizing miniaturization and handles everything from standard strips to soldering and assembly.
Hino Engineering Inc., founded in 1978, is a Japanese manufacturer headquartered in Hachioji City, Tokyo, developing electronic devices and processed parts. The company, certified with ISO 9001:2000, offers development technology hardware and software for industrial embedded computers, central processing unit (CPU) boards, and cameras. It also provides electronic manufacturing services (EMS), managing the entire production process from material procurement to assembly and testing. The company further facilitates overseas procurement services for processed parts, including aluminum die-cast and extruded parts, molded jigs and tools, plastic molded parts, and more.
Founded in Switzerland, Kistler serves both public and private customers in the automotive, aerospace, maritime, transportation, medical, semiconductor, energy and life sciences industries. Products include sensors as well as connectivity, signal, and data acquisition devices as well as software solutions. Applications of these solutions include R&D to safety testing, and condition monitoring. Key technologies include dynamic pressure, force, torque and acceleration measurement technologies.
Baumer Electric AG was founded in 1952 and is headquartered in the city of Frauenfeld, Switzerland. The ISO 9001 and ISO 14001 certified company provides sensor solutions for digitalization, packaging, railway, food and beverage, and pharmaceutical industries. A sample of the company’s sensor product listings includes object detection, distance measurement, force sensors, accessories, and connectivity devices. The company offers product support for setup and installation, product functionality, and optimized product usage.
ALTHEN, established in 1978, headquartered in Kelkheim, Germany, is a manufacturer and supplier that specializes in providing precision sensors and measurement solutions. Their product range includes strain gauges, load cells, pressure transducers, and displacement sensors, catering to industries such as aerospace, automotive, renewable energy, and robotics. ALTHEN's sensors enable accurate data collection, testing, and monitoring of various parameters critical to the performance and safety of industrial processes and structures. They maintain ISO 9001 and ISO 14001 certifications, ensuring the quality of their products for precise measurements across diverse industrial applications.
Colibrys, a joint company established in 2001 and headquartered in Yverdon-les-Bains, Switzerland, is a manufacturer, designer and supplier of micro-electro-mechanical systems sensors and electronic machines. The company offers a wide range of products including mechanical power transmissions, power generation systems, and seismic sensors. These products are used in industries such as aerospace, defense, energy, and transportation. Their products are utilized for various applications including measuring acceleration, inclination, and seismic activity, enabling data collection for various critical applications. The company also offers services such as aerial refueling and air delivery systems.
ST Micro Electronics is a global semiconductor company serving customers with innovations to have a positive impact on people's lives. Their product line is micro electronic systems, such as switches, controllers, sensors and drivers. The main selling point of ST Micro Electronics is its provision of sustainable products, and introducing their electronics to create a more sustainable world. The company, as well as providing the electronic devices, also provides software and support, ensuring that all fields are covered to provide a fully provide a supported and strong relationship with their customer base. ST Micro Electronics believe that technology plays a key role in helping to solve environmental and social challenges, which is why their semiconductor technologies start with their employees, their customers and partners.
KYOWA ELECTRONIC INSTRUMENTS CO., LTD., founded in 1949 as Kyowa Radio Laboratory Co., Ltd., is a Japanese manufacturer and distributor based in Chofu, Tokyo, specializing in stress measuring equipment with strain gages. Their product offerings include strain gages, bridge boxes or input adapters, transducers, and related accessories. Additionally, KYOWA operates TAMAYA TECHNICS INC., a subsidiary that manufactures navigation, surveying, and meteorological instruments. KYOWA's stress measuring products find applications in various industries. For example, their measurement instruments are used in riding quality evaluation and safety tests of automobiles and railway roads. These devices are also utilized in construction, civil engineering, and healthcare sectors.
DynaLabs Mühendislik LTD, founded in 2013, and headquartered in Ankara, Turkey, is a manufacturer and a supplier of dynamic testing and measurement equipment. The company has an extensive MEMS accelerometer and gyroscope product lines that meet the automotive and aerospace industry's needs. Its product range includes capacitive accelerometers, piezoresistive accelerometers, gyroscopes, as well as inertial measurement units and permanent magnet shakers. The company's external amplifiers are designed to have integrated signal generators.
EXSENCO, LLC., is based in Corpus Christi, Texas. EXSENCO is the American distributor for SANTET, Co. Ltd, which is a manufacturer of sensing and controls products based in Osaka, Japan. EXSENCO offers consultancy in the general area of control systems to provide clients with technology that adapts itself to changes in the workplace, rather than the workplace adapting to changes in technology. EXSENCO’s product segments include displacement & level measurement, servo valves, I-SAC servo controllers, and other products.
DIS Sensors is an ISO9001 certified company with its headquarters in Soest, Netherlands, and is known as the developer and supplier of sensors for measuring inclination and acceleration, as well as rotary encoders for many industrial applications. The company serves the energy sector, medical, mobile, oil & gas, and material handling industries with a range of sensors including inclination & acceleration sensors, safety sensors, and other products such as tilt switches, cables, and accessories. The company provides support answers to technical questions and orders to customers who need them.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Dytran Instruments, Inc. |
8.1%
|
| 2 | Analog Devices, Inc. |
6.6%
|
| 3 | Bosch Sensortec |
4.9%
|
| 4 | Micro-Hybrid Electronic GmbH |
4.6%
|
| 5 | SignalQuest |
4.6%
|
| 6 | Comus International |
4.4%
|
| 7 | Silicon Designs, Inc. |
4.2%
|
| 8 | ALTHEN |
4.0%
|
| 9 | Continental Automotive World |
3.8%
|
| 10 | RION Co., Ltd. |
3.8%
|
Derivation Method
The ranking is calculated based on the click share within the acceleration sensor page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
7 | 29.2% |
|
Japan
|
6 | 25.0% |
|
Germany
|
5 | 20.8% |
|
Netherlands
|
2 | 8.3% |
|
China
|
2 | 8.3% |
|
Ireland
|
1 | 4.2% |
|
Turkey
|
1 | 4.2% |
Krone Co., Ltd.
200+ people viewing
Last viewed: 6 hours ago
■ Characteristics ・ Module type 1 axis ・ Small, MV output ■ Applications For collision tests, etc.
2 models listed
Krone Co., Ltd.
120+ people viewing
Module one axis ■ Applications Modal analysis, R & D, etc. ■ Features Stable temperature response
Krone Co., Ltd.
150+ people viewing
Last viewed: 2 hours ago
■ Compatible with Tactical-Grade INERTIAL NAVIGATION ・ The 1527J series is a board -implementation type acceleration sensor that supports very hig...
Krone Co., Ltd.
160+ people viewing
■ Module type 3 axis ・ It is a module measurement acceleration sensor with excellent cost performance. ・ Uses a capacitive MEMS element, which ha...
2 models listed
Krone Co., Ltd.
320+ people viewing
Last viewed: 8 hours ago
Module one axis ■ Applications Equipment vibration monitoring, etc. ■ Features High answer frequency (500g: 18kHz)
2 models listed
Krone Co., Ltd.
160+ people viewing
■ High temperature support -175 ° C ・ The 1531J series is a board -implementation type acceleration sensor that supports very high resolution (12 ...
Krone Co., Ltd.
110+ people viewing
Module 3 -axis ■ Applications Helicopter Flight Test, etc. ■ Features Removable support
Krone Co., Ltd.
170+ people viewing
Module one axis ■ Applications General industrial use, vibration measurement in strict environment, etc. ■ Features Compatible with Emi Protection
2 models listed
Krone Co., Ltd.
140+ people viewing
Last viewed: 5 hours ago
■ High performance ・ Q-Module type acceleration sensor 2225 series has a compatible structure with the industry standard quartz acceleration senso...
Krone Co., Ltd.
120+ people viewing
Module 3 -axis ■ Applications Vibration vibration measurement, aerospace -related, etc. ■ Features Removable support
Krone Co., Ltd.
160+ people viewing
Last viewed: 2 hours ago
Module one axis ■ Applications For low cost OEM, general industrial applications, etc. ■ Features Output AMP built -in, cable accessories, low cost
Krone Co., Ltd.
130+ people viewing
■ Compatible with Tactical-Grade INERTIAL NAVIGATION The Q-Module type acceleration sensor 2227 series has a compatible structure with the industry...
Krone Co., Ltd.
140+ people viewing
Module 3 -axis ■ Applications For collision tests, etc.
Krone Co., Ltd.
160+ people viewing
Last viewed: 1 day ago
Module one axis ■ Applications General industrial use, gearbox vibration measurement, etc. ■ Features low cost
Krone Co., Ltd.
130+ people viewing
■ 5VDC power supply compatible ・ The 2012 series is a 1 -axis acceleration sensor of 5VDC power supply. ・ It is a unit that is relatively unlikel...
Krone Co., Ltd.
220+ people viewing
Last viewed: 1 day ago
Baseboard implementation type MV output ■ Applications Vibration, shock monitoring, etc.
2 models listed
Krone Co., Ltd.
190+ people viewing
Last viewed: 1 day ago
Board implementation type 1 axis ■ Applications Equipment vibration monitoring, etc. ■ Features Low cost, output AMP built -in
2 models listed
Krone Co., Ltd.
140+ people viewing
Module 3 -axis ■ Applications High frequency bandwidth vibration measurement, etc. ■ Features High frequency band (~ 9kHz)
Krone Co., Ltd.
240+ people viewing
Last viewed: 11 hours ago
■ Standard specifications, small, cable separation type ・ The 2210, 2260, and 2266 series are 8 to 32VDC power supply 1 -axis acceleration sensors...
3 models listed
Microstone Co., Ltd.
220+ people viewing
Last viewed: 6 hours ago
■Features ・3-axis acceleration sensor capable of handling high G and high frequencies - Easy to connect with no built-in amplifier construction re...
6 models listed
Krone Co., Ltd.
170+ people viewing
Last viewed: 16 hours ago
Baseboard implementation type MV output ■ Applications Vibration control, device vibration monitoring, etc.
2 models listed
Krone Co., Ltd.
160+ people viewing
Last viewed: 16 hours ago
Board implementation type 1 axis ■ Applications Equipment vibration monitoring, collision, impact test, etc.
2 models listed
Krone Co., Ltd.
170+ people viewing
Last viewed: 3 hours ago
Module 3 -axis ■ Applications General industrial use, stress screening, etc. ■ Features Connector type, small (11mm)
Krone Co., Ltd.
170+ people viewing
Last viewed: 1 hour ago
■ High performance, small, cable separation type ・ The 2220 and 2276 series are 8 to 32VDC power supply 1 -axis acceleration sensors, and have a v...
2 models listed
Krone Co., Ltd.
430+ people viewing
Last viewed: 17 hours ago
■ Characteristics ・ Bachelon implementation type MV output ・ Low cost, high -speed range support, mechanical impact protection mechanism ■ Appli...
Krone Co., Ltd.
180+ people viewing
Board implementation type 1 axis ■ Applications Failure prediction conservation, data logger embedded, etc. ■ Features Low cost, built -in output...
Krone Co., Ltd.
120+ people viewing
Module 3 -axis ■ Applications Vibration, impact monitoring, etc. ■ Features TEDS 1451.4 compatible products
Krone Co., Ltd.
240+ people viewing
■ High performance, titanium housing -The 2240 series is a 1 -axis acceleration sensor of 8-32VDC driving cable detachment, and has a very high res...
Krone Co., Ltd.
230+ people viewing
Last viewed: 1 day ago
■ Characteristics ・ Bachelon -implemented type output built -in (0.5 to 4.5VDC) ・ Low cost, 2 -axis direction installation (2 sides of solder ins...
Krone Co., Ltd.
190+ people viewing
Last viewed: 9 hours ago
Substrate implementation type 3 axis ■ Applications Equipment vibration monitoring, etc. ■ Features Low cost, output AMP built -in
3 models listed
