All Categories
History
This section provides an overview for resistance temperature detectors (rtd) as well as their applications and principles. Also, please take a look at the list of 95 resistance temperature detector (rtd) manufacturers and their company rankings. Here are the top-ranked resistance temperature detector (rtd) companies as of December, 2024: 1.TEGAM Inc., 2.Omega Engineering, Inc., 3.Enercorp Instruments Ltd..
Table of Contents
2016: Received his Ph.D. in Engineering from the Nagoya University Graduate School of Thermal Management Laboratory for research on hydrated heat storage.
2016~2020: Part-time lecturer at Meijo University and researcher at Nanomaterials Center.
2021~2022: Worked at Sophia University PJPD, and he is currently a registered researcher at the University of Tokyo Hospital.
https://researchmap.jp/tbhC95lYNrMI6JD0
https://www.linkedin.com/in/%E4%BA%9C%E8%A1%A3-%E4%B8%89%E5%B4%8E-069726245/
Resistance temperature detectors (RTD) are used in chemical plants to measure the temperature of process fluids (liquids and gases).
Resistance temperature detectors (RTDs), however, have less measurement error than thermocouples and are more accurate, especially at low temperatures. For this reason, they are often used when low temperatures are important or when high temperatures are not measured often.
They are also widely used in temperature measurement in chemical plants because they can be used for a wide variety of fluids if a protective tube is used.
Resistance temperature detectors (RTDs) are used to measure the temperature of process fluids (liquids and gases) flowing in pipes or tanks or stored. They are often used to display temperatures, especially when they are used to control or regulate temperatures.
For example, the temperature of the cooling water at the inlet and outlet of a heat exchanger is measured to adjust the amount of cooling water according to the amount of heat exchanged. The temperature of a gas is measured when measuring the flow rate of an orifice flow meter to apply temperature compensation.
Resistance temperature detectors (RTD) have low temperature error and high accuracy, so they can be used to control locations where the temperature is not so high or to control or regulate low-temperature antifreeze, for example.
Resistance temperature detectors (RTD) measure changes in temperature by utilizing the property of a metal that its resistance value changes with temperature. Metals increase their resistance value as their temperature rises, and this characteristic is used in many cases, platinum is used.
For this reason, resistance temperature detectors (RTD) made of platinum, known as Pt100, are widely used in Japan. Also, since it is common to control and regulate the temperature in industrial processes by means of a 4-20 mA current, some products have a converter built into the terminal box of the resistance temperature detector (RTD) to enable a 4-20 mA output. Such products are very convenient because they eliminate the need for a converter in the control panel.
Resistance temperature detectors (RTD) are also specified by their grade. Although these devices can measure temperatures accurately with high precision, the required accuracy varies depending on the process fluid (liquid or gas) used, so consideration must be given. However, if the thermal response is slow, it may not work well depending on the physical properties of the process fluid (liquid or gas) used, so care must be taken when performing precise control or control.
Resistance temperature detectors can be wired in three different ways: 2-wire, 3-wire, and 4-wire. 2-wire is the simplest method, with one wire at each end of the resistance temperature detector (RTD). However, the disadvantage is that the resistance of the wiring is added as it is. Since the resistance of the wiring must be measured and corrected in advance, it is not practical.
The 3-wire method is the most common wiring method, with two wires at one end of the resistance temperature detector (RTD) and one wire at the other end, and if the electrical resistance of the three wires is equal, the resistance of the wires can be ignored. The 4-wire type is more expensive, but the resistance of the wires can be completely disregarded.
Resistance temperature detectors (RTD) and thermocouples are both temperature measurement devices, but there are differences in temperature measurement range and accuracy.
1. Main Materials and Measuring Temperature Range
Resistance Temperature Detector (RTD)
Platinum, copper, nickel, and platinum-cobalt are available, each of which has a different temperature measurement range of up to 600°C.
Thermocouple
Platinum-rhodium alloy," "nickel-chromium alloy," "iron," and "copper" are used, and their temperature measurement ranges differ. The superheat working temperature of B thermocouples is 1,700°C. For measuring high temperatures, thermocouples can be used. Thermocouples are used when measuring high temperatures.
2. Measurement Accuracy
Resistance Temperature Detector (RTD)
Tolerance of JIS C1604 standard for resistance thermometer
Resistance temperature detectors (RTD) are available in two measurement accuracy classes, A and B. Comparing the tolerances at 450°C, the maximum measurement temperature for Class A resistance temperature detectors (RTD), the tolerances are ±1.05 °C for Class A and ±2.55 °C for Class B.
Thermocouples
Thermocouple Temperature Tolerance
Thermocouples have measurement accuracy classes 1 to 3, which are specified for each measurement temperature range. When the thermocouple (K) is 450 °C, the tolerance is ±1.8 °C for Class 1, ±3.375 °C for Class 2, and 450 °C is not specified for Class 3. From the tolerances, it can be said that Resistance temperature detectors (RTD) have higher measurement accuracy than thermocouples, and are used for measurements that require high accuracy.
*Including some distributors, etc.
Sort by Features
Sort by Area
OMEGA Engineering Inc., founded in Norwalk, CT, in 1962 is a manufacturer of products used to measure temperature and humidity, flow and level, and pressure. The company's product portfolio includes thermocouple probes and assemblies, pressure gauges and switches, and air velocity measurement systems, wireless systems and portable optic sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company also offers customer services that include support, custom research projects and customized services.
TEGAM, established in 1979 and headquartered in Geneva, Ohio, USA, stands as a manufacturer and provider of advanced test and measurement solutions. The company serves industries such as electronics, telecommunications, and aerospace. Its product line encompasses precision measurement tools, temperature and humidity measurement devices, and RF power sensors, addressing the needs of sectors that prioritize precise measurements. TEGAM's quality is evident through its ISO 9001 certification and industry awards. American Association for Laboratory Accreditation (A2LA) has also accredited this company for its specific calibrations listed on Certificate Number 2018.01.
ifm efector (ifm) is a subsidiary of ifm electronic, founded in Germany in 1969. ifm has developed, manufactured and marketed sensors and controls technology to industries that include assembly and robotics, automotive, material handling, metal forming, mobile equipment, plastics, and food and beverage. Ifm produces sensors, condition monitoring equipment, image processing, safety technology, industrial communication, IO-link, systems for mobile machines, displays, software, connection technology, voltage supplies, as well as other accessories.
United Equipment Accessories, Inc. is a manufacturer of slip rings, rotary unions, and integrated slip rings and rotary unions and was founded in 1952. The company produces slip rings, precision hydraulic swivels, industrial cables, and hose reels. The company also has a product catalog of shift controls for heavy-duty and off-road equipment. Its design options vary from cable fighters, column mounts, console mounts, and customer-supplied gate patterns. The industries served by the company include wind, construction, utility, and industrial markets.
Status Instruments Inc. is an American manufacturer of industrial electronic devices, with its headquarters located in Somerset, New Jersey. The company’s product portfolio includes programmable humidity and temperature transmitters, as well as alarm relay modules to process signals and resistance temperature detectors (RTDs) or potentiometers. The company also provides a range of powered signal conditioners and splitters, including those for load cells, frequency or pulse inputs, and voltage or current input signals. It further offers data loggers, loop-powered isolators, converters, and splitters, as well as humidity, temperature, and pressure indicators.
Alvord-Polk, Inc. is an american-made cutting tool manufacturer founded in 1881 in Millersburg, Pennsylvania. The company is specialized in the aerospacial industry, offering multiple custom services. It counts with a diverse product catalog, including numerous types of reamers, core drills, counterbores, power brushes, and other items. It operates many brands like Morton, BrushOne and AMPM. The venture's network reaches a worldwide status, being present in South America, Europe and the Far East, besides The United States of America. In addition, it complies with homologated quality standards, holidng an ISO 9001:2015 certificate.
Burns Engineering Inc., founded in 1960 and based in Eden Prairie, Minnesota, is a manufacturer and supplier specializing in temperature measurement devices. The company's product portfolio includes sanitary thermowells, cryogenic probes, and wireless transmitters. These products find applications in various industries, including chemical processing, food and beverage, and the oil and gas industry. The company offers services including technical support and calibration of temperature measurement devices. The company is ISO 9001:2015 certified, with sales representatives in Canada and Ireland.
Mi-T-M, founded in 1971, is a designer and manufacturer of industrial equipment, located in Peosta, Iowa, USA. Its comprehensive product range includes pressure washers, air compressors, generators, heaters, and more. The company utilizes advance technology, incorporating laser cutters, ASME robotic welders, and 7-stage powder-coat paint systems in its manufacturing processes. Notably, Mi-T-M has achieved certification as a testing facility for CSA. Its industrial equipment finds widespread use in diverse applications, ranging from heavy-duty cleaning with pressure washers, power generation through generators, and much more.
The company NOSHOK was founded in the year 1967 and they are located in the United States of America in the state of Ohio in the city of Berea. NOSHOK provides many different products such as pressure gauges, transmitters, transducers, pressure switches, level transmitters, temperature devices, valves, diaphram seals, digital indicators, KING filters, and additional accessories. Many of these products have been introduced by the company over time and they continue to introduce many new products.
Minco Products, Inc. is an American ISO 9001-certified manufacturer of heating and temperature control products founded in 1956 and based in Minneapolis, Minnesota. The company produces various products for heating systems, as well as for temperature or environmental control applications. Its products include humidity sensors, rigid flex circuits, and wire-wound heaters. The company primarily serves clients in the aerospace, energy, and life sciences sectors. It also offers contract manufacturing, product integration, and testing services for customers with unique projects.
Turck, Inc., established in 1965 and located in Mülheim, Germany, serves as a manufacturer of industrial automation solutions designed to enhance productivity and accuracy in the logistics field. The company's product portfolio includes sensors, power supplies, industrial controls, field logic controllers, and interface technology. Its products are utilized in the automotive, pharmaceutical, packaging, energy, and chemical industries. These products offer consistent automation, safety, and efficiency in oil and gas plants. Also, the company provides technical expertise and customized customer services.
Incorporated in 1965, Analog Devices, Inc. designs, manufactures, tests, and markets integrated circuits (ICs), software, and subsystems that leverage analog, mixed-signal, and digital signal processing technologies. The company provides data converter products, power management and reference products for power conversion, driver monitoring, sequencing, and energy management applications in the automotive, communications, industrial, and high-end consumer markets. In addition, the company provides digital signal processing and system products for high-speed numeric calculations. It serves clients in the industrial, automotive, consumer, instrumentation, aerospace, and communications markets.
Probes Unlimited, Inc. is a manufacturer of custom temperature measurement and control devices based in Lansdale, Pennsylvania, USA and was established in 1997. Specializing in electronic and mechanical probing systems, their diverse product range encompasses semiconductor test probes, PCB testing equipment, and custom probe solutions. The compant’s modernizations are integral in ensuring accurate testing and analysis across various industries, from semiconductor manufacturing to electronics research. With a legacy spanning decade, the company's pledge to modern probing technology remains steadfast, making them a principal partner in critical testing applications globally.
Durex Industries is an American ISO 9001 certified manufacturer of heaters, temperature sensors, and controls founded in 1980 before its acquisition by the British company Spirax-Sarco Engineering in 2022. Based in Cary, Illinois, the company offers thermal solutions and custom engineering of electric heaters, temperature sensors, process heating systems, and temperature controls. They serve clients in various industries including those in packaging, medical and life sciences, semiconductor manufacturing, and aerospace technology. Durex Industries also provides design, contract manufacturing, and testing services to customers with unique projects.
Therm-X of California, a company established in 1983, based in Hayward, California, United States, is a manufacturer of customized thermal solutions and process control systems. The company offers various products such as industrial heaters, sensors, controllers, and control panels. These products are used in various industries such as semiconductor, aerospace, medical, defense, and renewable energy. It also provides services such as thermal design and test, CNC machining, metal joining, sheet metal manufacturing, and electro-mechanical assembly.
Thermo Electric Company, Inc. was founded in 1941, and headquartered in West Chester, Pennsylvania, is a manufacturer of temperature measurement and control instruments. The company's product range includes thermocouples, RTDs, multipoint sensors, tube skin sensors, and thermowells, which serves in industries such as manufacturing, food & beverages, metal processing, automotive, and aerospace. Its products are used for precise temperature measurement and control across various industries, ensuring product quality, safety, and process efficiency.
Pearse Betram+ was founded in 1947 in Bloomfield, Connecticut. Today Pearse Bertram+ is an end-to-end solutions provider for the manufacturing industry. Pearse Bertram+ is ISO 9001:2015 certified and also UL508A (industrial control panels), IPC 620 (wire harness assemblies), and IPC-A-610, J-STD-001, and IPC-7711 certified for soldering. Pearse Bertram+ operates in both contract manufacturing and engineering support. The manufacturing segment includes electrical, pneumatic, robotic, hydraulic, and process systems. Engineering support includes support for operation of robotics, machinery design and usage, industrial automation, value engineering, and auditing.
ARi, established in 1952 in Chicago, is a manufacturer and supplier of quality thermal management products for various industrial and commercial process applications. The company’s products include thermocouples, RTDs, and heaters. They offer custom solutions, facilitated by their in-house manufacturing of mineral insulated cable with applications in automotive, medical, aerospace, and other industries. ARi’s management meets ISO 9001:2015 requirements, as certified by National Quality Assurance (NQA). They offer customers complete NDT (non-destructive testing) procedures and certification for all cable and finished assemblies.
Industrial Heater Corp (IHCO), established in 1953, is a manufacturer and supplier of Band Heaters for industrial processing based in Cheshire, USA. With a rich history dating back to the post-World War II era, IHCO has been a preferred choice for Original Equipment Manufacturers in the plastics industry. Their patented Ceramic-Insulated Band Heaters garnered global recognition, especially in the injection molding revolution. Over the years, IHCO expanded internationally, providing heaters to manufacturers worldwide. The company has a diverse customer base across industries like chemicals, pharmaceuticals, and packaging.
Thermalogic Corp. is a built-to-order electronic sensor and control manufacturer that was established in 1971. The company is headquartered in a Hudson, Massachusetts facility, where they handle all services in-house. They service various local and international customers in industries, such as medical, military, industrial, food, and transportation. The company’s sensors are used for controlling temperature, humidity, and processes for OEMs (original equipment manufacturers) and volume users. Common products that apply their sensors and controls are HVAC, packaging equipment, food processing, semiconductors, and commercial incubators.
Process Control Systems, Inc. operates out of Chaska, Minnesota and has a 40-year history of manufacturing rotational speed monitoring systems designed to monitor belt conveyors, bucket elevators, screw conveyors as well as other types of material handling and processing equipment with 5-year warranties. Process Control Systems products include switches, tachometers, monitors, and more. Process Control Systems products are often used in belt conveyors, dust collection systems, bucket elevators, and fans. In such machinery they can indicate damage or slippage, count or prove rotation, and indicate operating metrics such as speed and temperature.
Smith Systems, Inc. was founded in the 1980s and is headquartered in Brevard North Carolina. The company is a manufacturer of speed sensors, motion sensors, temperature sensors, as well as instrumentation and cable harnessing devices for industries such as aerospace, military, and rail industries. The company also offers custom manufactured products, per customer demands, both for quality control purposes and for OEM qualification. Potential design configurations include capabilities unique to railroad or aerospace applications including track sensing, angle sensing, and tolerance to extreme conditions.
Tempco is based in Wood Dale, Illinois and has been in business since 1972. Tempco is a manufacturer of many types of heating elements and thermocouples with design variations. Tempco is ISO 9001:2015 certified. Temco’s electric heaters and elements include band heaters, cartridge heaters, cast-in heaters, ceramic fiber heaters, coil and cable heaters, drum heaters, enclosure heaters, flexible heaters, heat trace cable, heated hose and tubing, infrared heaters, process heaters, shroud systems, strip heaters, tank heaters, and tubular heaters. Tempco also sells various application accessories and wiring accessories.
Temperature Specialists, Inc., founded in 1977, is a custom manufacturer of temperature detectors, thermocouples, molded handle probes, thermowell and thermistors built to specifications. The detectors include platinum wire wound, transition, platinum thin film and connector, sheath, fast response hollow element, and bayonet-style resistance temperature detectors. The St. Francis, MN company serves home appliances, automotive, medical, industrial equipment, and electronics. The company also offers thermocouple assemblies, molding of plastic parts, miniature welding, and custom Hot Wire Anemometer manufacture.
Ashcroft was founded in 1852 in Bridgeport, Connecticut to create instruments to protect steam-powered industry workers and today is a manufacturer in pressure and temperature measurement instrumentation.Ashcroft serves the chemical, food & beverage, metals & minerals, oil & gas, pharmaceutical & research, power, and water & wastewater markets. Ashcroft products include pressure instruments including pressure gauges, switches, sensors, and isolators; test instruments including calibrators, controllers, testers, and test gauges; and temperature instruments including thermometers, thermowells, RTDs, thermocouples, multipoint temperature sensors, and OEM temperature sensors.
Pyromation began operations in 1962 and operates out of Fort Wayne, Indiana. Pyromation is a manufacturer of RTD temperature sensors, thermocouples, and thermowells. Pyromation serves the aerospace, aggregate, chemical, energy and power, food and beverage, heat treating, HVAC, incineration, medical, metal processing, mining, oil and gas, pharmaceutical, plastics, rubber, and waste/water industries. Pyromation’s product lines include thermocouples, RTDs, thermowells, transmitters, connection heads, wire, and accessories. Pyromation also offers application assistance, calibration, training, and custom design services.
Thermocouple Technology, LLC. was founded and headquartered in Quakertown, Pennsylvania. The company manufactures a full line of temperature measurement products, including thermocouples, RTDs, and related products and accessories for industries including power generation, pharmaceutical, aerospace, and semiconductor manufacturing. In addition to thermocouples and RTDs, the company’s product line includes thermowell, thermocouple wire & accessories, transmitters, and indicators. The company offers custom manufacturing in multiple material types for both large and small orders upon customer request.
Star SU, LLC was established in 1927 and is based in Chicago as a manufacturer of cutting tools and supplier of tool services. The company offers gear-cutting machine tools that have patent designs exclusive to them. Their selection of machines for this purpose includes Vertical Hobbing, Chamfer/Deburring, and Scudding Machines. The cutting tool category includes Gundrills, Carbide drills and Reamers, and PCD tools and the tool management services provided by the company cover all procedures required for tool resharpening and reconditioning. The industries served by Star SU LLC. include automotive, mining, oil & gas, aerospace, and many.
Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.
Glauber Equipment Corporation (Glauber EC) was founded in 1960 and is based in Lancaster, New York. Glauber EC designs, manufacturers, and distributes pumping products and systems to markets such as biogas, power & utility, renewable natural gas, food & hygienic, industrial, and chemical markets. Glauber EC offers Renewable natural gas (RNG) systems for normal environments as well as hazardous areas and landfills. Glauber EC also offers compressed air, pumping, and environmental protection systems. Pumping systems include centrifugal pumps, positive displacement pumps, and blowers. Additionally, Glauber also offers industrial and small steam turbine packages.
Founded in 1993, Liquidyne Process Technologies serves the dairy, brewery, distillery, biotech, pharmaceutical, & cannabis industries. Liquidyne offers a full line of sanitary and single-use products including process equipment components, sanitary equipment, single-use pumps and valves, single-use fittings and connectors, custom single-use assemblies, sanitary hose assemblies, sanitary valves, and single-use bioprocessing systems. Liquedyne produces all equipment in an ISO14644 Class 7-certified cleanroom has also attained 9001:2015, USP Class VI Testing, ASME Bioprocessing Equipment, and EHEDG certification status. Liquedyne also offers process optimization and on-site process audit & evaluation services.
Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.
West Control Solutions, established in 1994 and based in Brighton, East Sussex, is a manufacturer and supplier of products for process control and automation. The company's product range includes Single Loop Controllers, Multi-loop Controllers, Limit Controllers, Process Indicators, Recorders, and Transmitters. These products play a pivotal role in ensuring precision and efficiency in automation machinery manufacturing. Serving industries such as customized controller solutions and distributed I/O networks. The company specializes in Temperature Controllers, Thyristors and solid state relays, Controllers with integrated data logging, and Limit controllers.
The Azbil Corporation (formerly the Yamatak Corporation) aims to realize safety, comfort, and fulfillment in people's lives and contribute to global environmental preservation through "human-centered" automation. They provide their customers with timely solutions via an integrated structure that extends from planning and development to maintenance and service, capable of responding rapidly to customer needs.
Siemens began in 1847 and is headquartered in Munich, Germany. Siemens focuses in automation and digitalization technology and operates globally. Siemens’s 5 operating segments are digital industries, smart infrastructure, mobility, Siemens Healthineers, and Siemens Financial Services. Siemens Financial Services provides debt and equity investment as well as financing solutions. Siemens Healthineers is a medical devices company that provides products and consulting. Mobility includes passenger and freight transportation. Smart infrastructure includes full solutions for electrification. Digital industries offer both software and hardware for industries and production efficiency.
Knick Elektronische Messgeräte GmbH & Co. KG, founded in 1945, is a manufacturer headquartered in Berlin, Germany, providing interface technology and process analytics solutions. The company's industrial interface products include transducers, universal isolated and isolated standard signal conditioners, as well as mains- and loop-powered isolators. These products, marketed under the BasicLine and ProLine brands, are utilized across sectors such as e-mobility, energy, and railways. The company also offers industrial transmitters, sensors, and fittings for process analytics. These products cater to industries including biotechnology and pharmaceuticals, food and beverages, as well as water and wastewater.
KROHNE Group began in Duisburg, Germany in 1921 as a producer of variable area flowmeters. Today KROHNE isa a provider of industrial measurement products, solutions, and services. KROHNE services the chemical, food & beverage, life sciences, marine, metal & mining, nuclear, oil & gas, power generation, pulp & paper, water & wastewater, and sustainable energies industries. KROHNE product lines include tools for flow, level, temperature, and pressure measurement as well as process analytics and smart flow control. KROHNE offers full solutions for flow metering, monitoring, and wireless and remote metering applications.
Through its subsidiaries, Heraeus Group serves many industries around the world including green power generation, telecommunications, agriculture, aerospace, medical, jewelry, and environmental protection. Heraeus Group companies create products including fiber optics, ceramics, custom metals, surgical equipment, special purpose lamps, and photovoltaics.
Teracom Ltd., founded in 1993 and based in Ruse, Bulgaria, is a manufacturer of remote monitoring and control solutions. The company provides controllers for remote monitoring over ethernet and mobile networks. It also provides sensors, detectors and transmitters for transformation of environmental parameters like temperature and humidity into electrical signals. These signals are monitored from devices either for Ethernet remote monitoring or GSM remote monitoring. The company also offers monitoring software, apps and tools for collecting and displaying data from controllers installed in different locations.
EKO Instruments, founded in 1927 in Tokyo, Japan, is a manufacturer of advanced scientific instruments and solutions. The company specializes in producing unique instruments for measuring solar radiation, measuring photovoltaic performance, and environmental parameters. The products include solar radiation sensors, pyranometers, photovoltaic analyzers, and meteorological instruments. These products provide accurate data collection, enabling professionals in industries such as renewable energy, meteorology, agriculture, and environmental research to make informed decisions and optimize their processes. EKO Instruments' precision, adaptability, and technological advancement in the field of solar measurement and environmental monitoring result in the global transition towards sustainable and efficient energy solutions.
FuehlerSysteme eNET International GmbH is a manufacturer and supplier of sensors for measuring environmental conditions, founded in 1990 and is headquartered in Nuremberg, Germany. Their products include temperature sensors, humidity sensors, pressure sensors, air quality sensors, and flow sensors. These products are used for measurement and control purposes. The company holds ISO 9001:2015, CE, EAC and RoHS certifications, serving manufacturers of systems and control technology, installing craftsmen, building operators, energy/process optimizers, and contractors.
Shandong Friend Control System Co. Ltd. is a Chinese manufacturer of measurement instruments and automation controls founded in 2002 and based in Zibo, Shandong. The company produces various transmitters, sensors, and meters for measuring temperature, pressure, and flow of industrial materials. These include radar level transmitters, variable area flow meters, and industrial temperature sensors. The company's products are primarily used by clients in the pharmaceutical, water treatment, and vacuum equipment manufacturing sectors.
Adeunis is a manufacturer and developer of wireless technology products and related devices originally established in 1996 and headquartered in Crolles, France. The company specializes in products designed to work within the Internet of Things (IoT) B2B sectors. These include various sensors, modems, and applications for consolidating system controls and optimizing organization. It also offers system setup tools and services such as personnel training and consultation. The company’s products chiefly serve clients involved in the construction and design of smart cities and environments.
Beamex, founded in 1975 in Finland, is a manufacturer and supplier of calibration solutions and services. The company’s comprehensive range of products includes portable calibrators, calibration software, temperature calibration equipment, pressure calibration equipment, and more. These offerings find applications in industries like pharmaceuticals, energy, manufacturing, and food processing. Tasked with enhancing precision and accuracy, Beamex provides convenient calibration solutions that ensure the integrity of measurement processes. With a global existence and an aim for customer satisfaction, Beamex continues to play a vital role in improving measurement accuracy and efficiency across various industries.
Makersan, established in 1978 and headquartered in Gebze, Turkey, is a manufacturer of mechatronic parts and assemblies. Its offerings include electronic accelerator pedals, hand throttle, ABS sensors, pressure sensors, and temperature sensors for various sectors like engine control, HVAC, and food processing. Its quality management system is underlined by their TS 16949, ISO 14001, ISO 9001, and OHSAS 18001 certifications, solidifying their role on the field of sensing, controlling and actuating applications.
Allectra, established in 2002, is based in Sussex, United Kingdom, and is a manufacturer and supplier of vacuum components and bespoke engineering solutions. The company's main product portfolio includes vacuum feed-throughs, electrical and high-vacuum connectors, motion and manipulation equipment, and other specialized components used in vacuum systems across various industries like research, semiconductor, and aerospace. Allectra's quality products are designed to meet the stringent demands of vacuum technology, ensuring ideal and efficient performance in critical applications. They offer comprehensive engineering services to customize solutions that precisely fit their customers' requirements.
HYODA INSTRUMENTS CORPORATION is a manufacturer of thermometers and related measurement as well as control devices that was established in Osaka, Japan in 1917. The company’s product lineup includes protective relays for monitoring abnormal transformer functions, dial thermometers, thermo sensors, and pressure gauges for measuring refrigerant gasses in air conditioning systems. It also offers gas density switches and protective tubes for insulating thermo sensors from vibration pressure or corrosion. The company’s products are commonly used in light industry, heavy industry, and shipbuilding, as well as in petrochemical and nuclear power plants.
Established in 1954, Tokyo Measuring Instruments Laboratory Co., Ltd. (Tokyo Sokki Kenkyujo Co., Ltd.) is a manufacturer headquartered in Tokyo, Japan, specializing in stress measurement equipment. The company has developed a wide range of strain gauge transducers, essential components for stress measurement in general and civil engineering. The company also produces other instruments, such as the portable digital strainmeter for automatic multi-point measurements. With overseas representative offices in China, Germany, and 43 other countries, TML serves global customers, providing solutions for the safety and efficiency of structures.
RKC Instrument has been continually growing for over half a century and strives to be a solution provider of measurement and control systems. RKC supplies quality products and professional engineering services quickly and efficiently. RKC specializes in everything from limit and multiloop controllers to heater break alarms and temperature sensors. RKC has a website in Chinese, English, and Japanese and has sales networks across the globe. Based on the management concept of “Realization of the highest quality,” RKC Instrument has obtained the accreditation of ISO9001, the international standard for quality management systems.
KOA Corporation, established in 1940 in Minowa-machi, Japan, is a manufacturer of electronic components. The company provides an extensive product range including resistors, current sense shunt resistors, fuses, thermal sensors, and inductors. These quality components find applications in industries such as automotive, ecology, energy conservation, telecommunications, power supply units, and home appliances. Operating under the guiding principles of circulation, finite resources, harmony, and enrichment, it continues to provide sustainable electronic solutions to cater to the ever-changing demands of global industries.
OVAL Corporation, founded in Tokyo, Japan, in 1949 is a manufacturer of metrological control equipment and related systems and measuring devices and environmental control related instruments. The company's product portfolio includes batch controllers, flow computers, peripherals and related instruments, system solutions and calibration equipment. Their products are used in industries such as Food and Beverage, Pharmaceutical and Biotechnology, Chemical and Petrochemical, Environmental Testing and healthcare. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
Chino, headquartered in Tokyo, Japan, is engaged in the manufacture and sale of measurement and control equipment and instrumentation work. The company was founded in 1936 as Chino Seisakusho. Chino operates in the area of "measurement, control, and monitoring" and contributes to the development of all industrial fields. Major products include recorders, regulators, temperature sensors, data loggers, radiation thermometers, thermal image measuring devices/thermal cameras, composition meters, moisture meters, thickness meters, thyristor regulators, and fuel cell evaluation and testing devices.
Guangzhou TS Heater Technology Co., Ltd., established in 2009, and headquartered in Guangzhou, China, is a manufacturer of industrial temperature control equipments. The company offers a range of products including industrial heaters, thermostat & thermocouple, air heater, ceramic heater, and electric heating tubes, serving in industries like manufacturing, food processing, medical, textile, and automotive. The company's products are used for precise temperature control and heating applications in industrial processes, ensuring efficient operations in various industries.
G. Sensor Srl, established in 2005, and headquartered in Orbassano, Italy, is a manufacturer of temperature sensors. Its product line includes thermocouple, RTD sensors, atex probes, transmitters, and temperature sensors, in which these products serves in industries such as manufacturing, food processing, environmental, medical, and reserach. The company's products are used for precise temperature measurement and control in industrial processes, ensuring safety and efficiency. The company also hold a ISO 9001 certification and a ATEX certification.
Precision Mass Products Pvt. Ltd., founded in 1967, is a manufacturer and supplier of precision weighing instruments. They offer a diverse range of products, including precision balances for laboratories, industrial scales for manufacturing applications, laboratory weights for calibration, analytical balances for research and pharmaceutical use, and weighing indicators for integrated weighing systems. The company has obtained ISO 9001:2015 certification, ISO 14001:2014, and OHSAS 18001:2007 certifications for its facility, complete with production, projects, design & development, customer service, and sales & marketing resource management.
Sensing Devices Limited, established in 1971, and headquartered in Southport, Merseyside, UK, is a manufacturer of precision temperature measurement devices. Its product line includes ceramic wire wound temperature detectors, flat fil detectors, RTD resistance temperature detectors, SPRTs (Standard Platinum Resistance Thermometers), and stator winding temperature sensors, which serves in industries such as transportation, defense, energy, manufacturing, and medical. The company's products are utilized for precise and reliable temperature measurement across various industrial applications, ensuring efficient operations and equipment protection.
Jiangsu Plaza Premium Electric Instrument Co., Ltd., established in 2003, and headquartered in Park Xinghua, Jiangsu Province, China, is a manufacturer and supplier of heating and temperature control solutions. The company offers a range of products including heat trace cable, high temperature cable, laboratory noble metal, heating cable, and thermocouple, RTD Sensor, which these products serves in industries such as manufacturing, industrial, electrical, oil & gas, and research. Its products are used for freeze protection and temperature maintenance, withstanding extreme heat, supports precise scientific experiments, providing warmth in various applications, and to accurately measure temperature in industrial processes.
Enercorp Instruments, Ltd was born in 1977 and operates out of Brampton, Ontario. Enercorp is a manufacturer of measuring equipment used in markets such as HVAC, industrial monitoring, food processing, waste management, pharmaceutical, lumber, and agriculture. Enercorp produces sensors and components in six categories: temperature, including temperature sensor plates and temperature probes, current such as core current switches and current indicators, Aqua-Boy & curing such as moisture meters and needle electrode heads, pressure such as pressure transducers and pressure transmitters, wind such as ultrasonic anemometers, and binding post, such as lead-through bolts.
Innovative Sensor Technology IST AG was founded in 1991 and is headquartered in Ebnat-Kappel, Switzerland. The company is a manufacturer of physical, chemical, and biological sensors that serve industries including automotive, fuel cell, renewable energy, and medical devices. The company has 4 product segments. Micro heaters are used for laser manufacturing, humidification, 3D printing, and other specialty uses. Customized sensor solutions are offered across many customer fields, and designed for quality, accuracy, and compatibility.
MPI was founded in 1999 and is based in Toronto, Ontario. MPI is a designer, engineer, and manufacturer for heaters, sensors, controllers, relays, and other related products. MPI’s product categories include cartridge heaters, band heaters, strip heaters, coil & cable heaters, melt pressure products, drum heaters, heated hose, heater accessories, tubular heaters, immersion/process heaters, silicone/flexible heaters, thermocouples, RTDs, temperature controllers, linear transducers, cast-in heaters, mercury contractor relays, Watlow thermocouples/RTDs, and other products including various controllers and accessories.
WINTERS INSTRUMENTS is a manufacturer and supplier of pressure and temperature instrumentation, established in 1953 in Canada. The company specializes in producing a wide range of gauges, thermometers, and other measurement devices for industries like oil and gas, food and beverage, and HVAC. With a rich history of innovation, WINTERS INSTRUMENTS is devoted to providing accurate measurement solutions. Their products are designed to withstand demanding environments and ensure the safety and efficiency of industrial processes.
AON3D has been a manufacturer of 3D Printers since 2015 having its headquarters in Quebec, Canada. The company designs 3D printers that can print with a wide range of materials including the strongest thermoplastics in the world, and the use of carbon fiber and glass fiber composites and other affordable materials for prototyping is also possible. The printers are capable of extrusion control, configurable process parameters, and optimized thermal management giving efficient end products which makes them help with Additive Manufacturing for Aerospace and Defense, many Manufacturing Operations, and provide Federal and Military Additive Manufacturing Solutions.
Bürkert Fluid Control Systems, founded in 1946 and headquartered in Ingelfingen, Germany, is a manufacturer of liquid and gas measurement and control systems. Its product range includes solenoid valves for fluid power systems, process and control valves for managing flow, pressure, and temperature, pneumatics and process interfaces for automation control, sensors, transmitters, and controllers for measuring physical and chemical parameters, and MicroFluidics solutions for precise fluid control. Its products serve diverse industries like breweries, labs, medical, and aerospace.
PR electronics, founded in Denmark, in 1976 is a manufacturer of signal conditioning devices. The company's product portfolio includes temperature transmitters, communication interfaces, multifunctional devices, displays and accessories. Their products are used to make industrial process control safer, more reliable, and more efficient. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
Define Instruments Inc. is a manufacturer of IIoT products that was established in 1990 in Dallas, Texas, USA. The company specializes in IIoT gateways, data loggers, signal conditioners, and related products. These products include its Nimbus brand processing interface, its Zen brand 16-channel remote terminal unit, and its Merlin brand universal input digital indicator. The company operates internationally, with an additional manufacturing facility located in Auckland, New Zealand. It mainly serves clients in the industrial automation, industrial manufacturing, and energy sectors.
Anderson-Negele is based in Fultonville, New York, USA, and is a manufacturer of sensors for process analysis and control applications that was established in 2004 following the merger of Anderson Instrument Company and Negele Messtechnik GmbH. The company’s product lineup includes conductivity sensors, turbidity sensors, and temperature sensors. It also offers bulk tank recorders, process recorders, and adaptors or fittings for a range of connector types. The company chiefly serves clients in the recreational beverages, biopharmaceuticals, and food processing industries.
UbiBot is a manufacturer of wireless environmental sensors and smart building solutions, founded in 2018 and based in the United Kingdom. The company specializes in the development and production of wireless IoT sensors, including motion sensors, air quality sensors, and leak detectors. It also offers a range of cloud platforms, external probes, and accessories, along with the UbiBot Global SIM, which allows UbiBot sensors to transmit data over cellular networks. The company has a wide distribution network across Europe, North and South America, Asia, Oceania, and Africa. It serves various sectors, including agriculture, pharmaceuticals, industrial monitoring, and home monitoring.
AMETEK U.S. Gauge, established in 1904 and based in Horsham, PA, USA, is a manufacturer and supplier of pressure and temperature gauges. The company's product lineup includes pressure gauges, thermometers, diaphragm seals, and thermowells. These items are pivotal for applications in refining, chemical manufacturing, power generation, and HVAC systems. serving industries such as refinery, mining, oil and gas, and HVAC and refrigeration, these products play a significant role in optimizing operational processes. Its services include the provision of cooling elements, tire pressure gauges, and gauge rubber boots.
Labom, founded in 1968 and based in Hude, Germany, is a manufacturer of pressure, level, and temperature measurement technology, such as electronic pressure and hydrostatic measuring devices. Its hygienic service devices are produced per 3A guidelines and are EHEDG compliant. The company makes all its products in-house, and its quality system is ISO 9001 compliant and conforms to ATEX 2014/34/EU and the Pressure Equipment Directive 2014/68/EU. It provides calibration services within the factory or on-site and serves several industries, including food, biotechnology, and pharmaceuticals.
Hengesbach, established in 1985 and based in Germany, is a manufacturer and distributor of measuring technology for the dairy, pharmaceutical, and biotechnology industries. The company’s product range includes analytical measurement, pressure, and temperature measuring technologies for pressure, level, and temperature. These products comply with international standards such as the EU Machinery Directive (2006/42/EC) and feature high-grade materials like stainless steel 1.4404 or 1.4435, with surface roughness below 0.8 µm. The company’s products incorporate FDA-accredited materials, IP67 and IP 69 K housing seals, and CIP and SIP-compatible process connections.
Shimaden Co., Ltd. is a manufacturer of industrial temperature and humidity control equipment founded in 1953 and based in Tokyo, Japan. The company manufactures a wide range of products for monitoring and controlling environmental factors. Its products include various sensor converters for humidity, digital or analog flow rate controllers, and thyristor power regulators for controlling isothermal tanks. These products are mainly used by clients in the food and beverage, chemical processing, and metal fabrication sectors. The company also offers control and data acquisition software for customers needing additional support.
TE Connectivity Ltd., started in 2007 and headquartered in Schaffhausen, Switzerland, is a designer and manufacturer of sensor and connectivity solutions for harsh conditions. It operates three primary segments, namely transport, industrial, and communication solutions, and its product portfolio includes automotive connectors, fiber optic connectors, analog power meters, RTD sensors, and circuit breakers. It serves customers in approximately 140 countries and several industries, including aerospace, automotive, rail, IoT connectivity, and E-mobility. The company manufactures 192 billion products annually and has invested over 610 million USD in research development and engineering.
Sense Thermo Instruments India Pvt. Ltd., headquartered in Pune, Maharashtra, India, is a manufacturer and supplier of temperature measuring devices. The company offers a diverse range of products including thermocouple, RTD, heat exchangers, compression fitting, and thermowell, serving in industries such as pharmaceutical, research, medical, manufacturing, and environmental. Its products are used for temperature measurement, heat treatment, furnace calibration, gas carburizing, and industrial processes for efficient temperature control and measurement.
LPG Industries, Inc., founded in 1968 in Bensalem, Pennsylvania, is a manufacturer and supplier of instrumentation sensors. Their product range includes temperature sensors, such as thermocouples, RTDs, and thermistors, as well as pressure sensors, including strain gauges, diaphragms, and bourdon tubes. Additionally, they offer other essential instrumentation sensors like flow, level, and vibration sensors. These sensors play a vital role in monitoring and optimizing turbine performance in various power plants, ensuring safe and efficient operation. LPG Industries' sensors are utilized in fossil fuel, nuclear, and hydroelectric plants. The company also provides testing and data acquisition services for instrumented components.
Acrolab Ltd was founded in 1948 in Windsor, Ontario as Accurate Laboratories where it still presides. The ISO 9001:2015-certified company provides thermal systems products and services for general manufacturing, electronics, automotive, and rubber industries among others. The company’s products include heat pipes, thermocouples, control panels, and other thermal distribution tools. The company provides thermal engineering, thermal simulation, and research & development services for customers. Thermal engineering provides concept development support. Simulations provide analysis to assist in design choice and operational strategies. The research and development group creates new designs for customers.
MOD-TRONIC Instruments Limited was established in 1972 in Brampton, Ontario, Canada. MTis a distributor of industrial sensors, transducers, heaters, controls, and instrumentation, primarily made in the USA as well as Japan, Switzerland, and Germany. MT’s customers are primarily in the aerospace, building automation, manufacturing, medical, military, oil and gas, and water treatment industries but also serves individuals. MT offers an above industry standard 5-year warranty and technical support on every product sold.
Copeland LP, headquartered in Sidney, Ohio, USA, is a manufacturer and supplier of HVACR solutions and softwares. Its diverse product range encompasses compressors, condensing units, hydrofluorocarbon products, and refrigerants. With a portfolio of over 3,000 patents, the company provides a pivotal role to the field of air conditioning and refrigeration, particularly through its scroll compressors. Additionally, the company offers Sensi and Verdant smart thermostats, enhancing temperature control, energy efficiency, and overall comfort.
HVACQuick is an online distributor and retailer of HVAC products, parts, and repair or maintenance tools that was established in 2003 in Medford, Oregon, USA. The company primarily stocks products from brand manufacturers such as Panasonic, Fantech, and S&P. These products include radon and crawl space ventilation components, attic fans and vents, and filter boxes and filters. It also offers technical support, as well as warranty and return services. The company commonly markets to customers in the residential and commercial sectors, as well as to HVAC contractors.
FineTek Co., Ltd, established in 1979 and headquartered in New Taipei City, is an ATEX & IECEX and TAF/ilac-MRA certified manufacturer and supplier of process automation and flow measurement solutions. The company's product portfolio includes Level Transmitters, Flow Measurement devices, Pressure instruments, and Temperature sensors. These products are utilized for monitoring and controlling process conditions, ensuring safety in industrial environments, and optimizing resource allocation. They are adopted by industries such as Water Treatment, Maritime, Steel, Power, and Construction. Additionally, the company offers services in wireless technology integration, pneumatic, and product solutions.
PUI is headquartered in Irvine, California. The company is an authorized distributor selling electronic components from manufacturers with a reputation for high quality and dedication to customer service. The company’s 5 primary product segments include fans, audio devices, capacitors, connectors, and power supplies. The company also offers other products such as fuses, cables, and other subcomponents. The company provides services including bonded inventory, EDI, and barcoding to insure ease of receiving and inventory management.
Interworld Electronics & Computer Industries Inc was founded in 1978 and headquartered in Point Roberts, Washington. The company is a distributor of electronic diagnostics and measurement tools. The company has other offices in Canada and international support available. The company also offers a variety of software for construction as well as for PC-based tools such as automotive oscilloscopes. The company offers a variety of digitizers, automotive diagnostics tools, high-voltage products, data acquisition products, and others.
C-T Products Company is based out of Rolling Hills Estates, California and has a 50 year history of being a manufacturer’s representative and distributor of industrial parts and process equipment for customers globally. Industries served include packaging, medical, electronics, semiconductor, plastic injection molding and extrusion, rubber compression molding, composites, aerospace, defense, military, cryogenics, petrochemical, and OEM. C-T Products sells washing equipment and many types of heaters including process hot air heaters, cartridge heaters, coil heaters, band and strip heaters, formed tubular, immersion, calculation, duct heaters, infrared heaters silicone heaters, industrial thermal process ovens.
B&B Instruments (BBI) was incorporated in Indiana in 1972 and still operates out of Indianapolis, Indiana today. BBI is an authorized stocking distributor for manufacturers of measurement, control & calibration equipment for pressure, temperature, flow, humidity, & level instrumentation serving both startups as well as Fortune 500 clients in industries such as utilities, metals, food, process, industrial, OEMs, and technical. BBI’s product categories include calibrators, controllers, meters, flow, gauges, humidity, level, meters, pressure, switches, temperature, and transmitters. Featured products include Autrol Transmitters APPT-3100 Differential Pressure Transmitter, Barksdale’s UDS7 Series Solid State Pressure Switches, Kytronic’s actuator positioner, and Monarch DataChart’s DC1250 2-Channel Paperless Recorder.
REGELTECHNIK KORNWESTHEIM GMBH, a subsidiary of CIRCOR International Inc. based in Kornwestheim, Germany, is a manufacturer and supplier of control valves. The company’s product portfolio includes electric and pneumatic valves, manual stop valves with bellows seal, and pneumatic actuators. These products are used in various sectors, including boiler construction, shipbuilding, and plant engineering and construction. The company offers services including spare parts supply, maintenance, and repair to ensure the optimal functioning of control valves and actuators. It exports its products to various countries including Canada, the United States, and China.
Sitron, started in 1978 and headquartered in Sao Paulo, Brazil, is a manufacturer of industrial measurement and control solutions used in temperature, pressure, and vibration applications, among others. Its products include hydrostatic level transmitters, flow switches, and pressure transmitters. The company’s CN series of conductive level switches come with integrated internal electronic relays within the housing, eliminating the need for a separate remote controller. In addition, the company’s HFS high-frequency limit level sensor, made using an all-stainless-steel housing, detects the level of fluids or paste-like media while being immune to build-up on the electrodes.
Vulcan Electric Company, established in 1927 and based in Porter, Maine, is a manufacturer of thermal solutions like temperature sensors, heater assemblies, and metal-sheathed heating elements. It also manufactures thermostats like bulb thermostats, though a majority of its products are custom-designed for specific processes or applications. It manufactures its products exclusively in the USA and has over 90 years of engineering and manufacturing experience. The company offers ISO 17025-accredited thermocouple calibration services for vital process industries such as glass and solar. It also provides temperature sensor calibration services ranging from RTDs at sub-zero temperatures to thermocouples at ultra-high temperatures.
Alfa Laval, founded in 1883 and headquartered in Toronto, Canada, is a supplier of heat transfer, separation, and fluid handling products like boilers, separators, and heat exchangers. The company’s operations are based on three key technologies, which are heat transfer, separation, and fluid handling, and it helps farmers separate, process, and store milk products. The company has 42 production units, out of which 22 are based in Europe, and it sells its products in over 100 countries. It invests about 2.5% of its total yearly sales in research and development, resulting in around 25-30 new product launches per year.
Intempco Controls Inc. is a trusted temperature measurement and instrumentation leader, offering high-quality sensors and controls for over 30 years. Based in Quebec, Canada, Intempco manufactures instrumentation devices for temperature, level, pressure, humidity, and flow. With global clients & distributors, their products can be configured to your exact application needs and are trusted for high accuracy, innovative design and ease of use. Intempco ensures enhanced quality control with their in-house production, calibration, and engineering capabilities. Their team of experts are ready to assist customers in various industries with their temperature sensing needs.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Enercorp Instruments Ltd. |
3.6%
|
| 2 | TEGAM Inc. |
3.3%
|
| 3 | Omega Engineering, Inc. |
3.3%
|
| 4 | Mod-Tronic Instruments Limited |
3.3%
|
| 5 | Durex Industries |
3.0%
|
| 6 | Innovative Sensor Technology IST AG |
3.0%
|
| 7 | REGELTECHNIK KORNWESTHEIM GMBH |
2.6%
|
| 8 | ARi Industries, Inc. |
2.6%
|
| 9 | Industrial Heater Corp. |
2.3%
|
| 10 | Ashcroft, Inc. |
2.3%
|
Derivation Method
The ranking is calculated based on the click share within the resistance temperature detector (rtd) page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
33 | 49.3% |
|
Japan
|
10 | 14.9% |
|
Germany
|
7 | 10.4% |
|
Canada
|
4 | 6.0% |
|
China
|
3 | 4.5% |
|
United Kingdom
|
2 | 3.0% |
|
Switzerland
|
2 | 3.0% |
|
Bulgaria
|
1 | 1.5% |
|
France
|
1 | 1.5% |
|
Finland
|
1 | 1.5% |
|
Turkey
|
1 | 1.5% |
|
Italy
|
1 | 1.5% |
|
India
|
1 | 1.5% |
122 products found
122 products
OG Co., Ltd.
50+ people viewing
Last viewed: 23 hours ago
Can be inserted into a protection tube with an inner diameter of φ0.8. Ideal for high-response micro-assembled temperature sensors.
OG Co., Ltd.
60+ people viewing
Last viewed: 23 hours ago
Can be inserted into a protection tube with an inner diameter of φ0.8. Ideal for high-response micro-assembled temperature sensors.
SHIMADEN
190+ people viewing
Last viewed: 3 hours ago
■Product description It is a general type resistance temperature detector. A general-purpose product with a platinum resistor element enclosed in a...
6 models listed
Kei-on Co., Ltd.
40+ people viewing
Last viewed: 23 hours ago
The sensor is molded with the same material as the covering material. It can be immersed directly into the liquid. Since Teflon is used for the coa...
SHIMADEN
90+ people viewing
Last viewed: 17 hours ago
■Product description It is a sheath type resistance temperature detector. Because it is filled with an insulator (magnesium oxide), it responds mor...
2 models listed
OG Co., Ltd.
40+ people viewing
Last viewed: 23 hours ago
■Features ・Excellent thermal bonding – shallow engagement depths possible ・Ideal for applications with limited space ・High temperature gradient ...
Endress+Hauser Group Services AG
240+ people viewing
Last viewed: 11 hours ago
Sanita thermometer that realizes optimal product quality, process safety and efficiency ■ Applications The module -type sanitari thermometer with ...
OG Co., Ltd.
50+ people viewing
Last viewed: 23 hours ago
■Features ・Excellent long-term stability ・Low self-heating ・Optimal cost performance ・Vertical lead wire can be manufactured ・Gold-plated nick...
Hakko Electric Co., Ltd.
40+ people viewing
Last viewed: 23 hours ago
Very Fast Response
■Summary Platinum resistance thermometer for temperature measurement ■Features ・Tolerance: JIS class A is also available. ・We also manufacture t...
Hakko Electric Co., Ltd.
30+ people viewing
Last viewed: 19 hours ago
Very Fast Response
■Summary Temperature sensor ideal for use under harsh operating conditions ■Features ・This product complies with the JIS F9703:1998 standard. ・T...
Masaie Co., Ltd.
180+ people viewing
Last viewed: 1 day ago
■ Features The thermo -power vs and measuring temperature resistors for sensit foods (S 91/260, TC 91/280) have a sharp angle of the sensor, measur...
Kei-on Co., Ltd.
30+ people viewing
Last viewed: 23 hours ago
This is a general resistance temperature detector that connects an internal conductor to a resistance element (my car element) and incorporates it ...
OG Co., Ltd.
70+ people viewing
Last viewed: 23 hours ago
■Features ・Excellent long-term stability ・Excellent solderability ・Low self-heating - Resistant to vibration and temperature shock ・Pair sensor...
Bika Japan Co., Ltd.
80+ people viewing
Last viewed: 1 day ago
Standard Response
■Product description Can be used with any type of thermowell design. This product is not suitable for use without a protection tube. Depending on t...
Bika Japan Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
Standard Response
■Product description Can be used in combination with various thermowells. We recommend that you use it with a thermowell installed, except in speci...
Bika Japan Co., Ltd.
40+ people viewing
Last viewed: 4 hours ago
Standard Response
■Product description A resistance temperature detector used for measuring liquid or gaseous media at low and medium pressures. Can be connected dir...
Bika Japan Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
Standard Response
■Product description Resistance thermometers without thermowells are particularly suitable for mounting the metal sensor tip directly into a boreho...
Bika Japan Co., Ltd.
60+ people viewing
Standard Response
■Product description This is a resistance temperature detector designed to be installed on thermometer model TR10-L. Use thermowells except in spec...
Bika Japan Co., Ltd.
40+ people viewing
Last viewed: 20 hours ago
Standard Response
■Product description The measuring inserts according to DIN43735 used in resistance thermometers are designed to be inserted into protective fittin...
Bika Japan Co., Ltd.
70+ people viewing
Last viewed: 12 hours ago
Standard Response
■Product description Model PU-548 can be used to configure digital temperature transmitters and thermometers with compact temperature transmitters....
Bika Japan Co., Ltd.
50+ people viewing
Last viewed: 8 hours ago
Standard Response
■Summary Model CTR6000 is a high precision thermometer using a resistor bridge circuit. The CTR6000 uses the latest measurement technology in DC ci...
Bika Japan Co., Ltd.
60+ people viewing
Standard Response
■Summary The most important evaluation in metrology is basic measurement quality. ASL bridge technology provides the best performance in resistance...
Bika Japan Co., Ltd.
90+ people viewing
Last viewed: 17 hours ago
Standard Response
■Summary By using proven AC bridge technology, the performance of the model CTR6500 resistance thermometer bridge has been significantly improved. ...
Bika Japan Co., Ltd.
50+ people viewing
Standard Response
■Summary This model has two series: CER6000-RR (reference resistor) and CER6000-RW (standard reference resistor). RR series 4-wire reference resist...
Tokyo Measuring Instruments Laboratory Co., Ltd.
530+ people viewing
Last viewed: 22 hours ago
Standard Response
5.0 Company Review
Attach it to the surface of the object to be measured and connect it to our data logger to measure temperature.
8 models listed
Senecom Co., Ltd.
40+ people viewing
Last viewed: 21 hours ago
Fast Response
The Apogee Platinum Resistance Temperature Sensor SE-ST-150 uses white heat shrink on the cable behind the PRT to minimize heat transfer to the sen...
Bika Japan Co., Ltd.
40+ people viewing
Standard Response
■Product description The measuring inserts according to DIN43735 used in resistance thermometers are designed to be inserted into protective fittin...
Bika Japan Co., Ltd.
50+ people viewing
Last viewed: 18 hours ago
Standard Response
■Product description Designed for ships and pipelines. We have a standard lineup of products compatible with DIN flanges and ASME flanges. Resist...
Yamato Co., Ltd.
190+ people viewing
Last viewed: 1 day ago
5.0 Company Review
Encased in an ultra-fine metal tube, it has excellent insulation and pressure resistance, and has a bent shape. ■Applications LCD/semiconductor ma...
Mysec Co., Ltd.
50+ people viewing
Standard Response
With support, it can be easily fixed to the pipe surface or tank surface. Thermocouples can also be manufactured with the same shape. ■Thermocoupl...
