89 Three-Phase Motor Manufacturers in 2024
This section provides an overview for three-phase motors as well as their applications and principles. Also, please take a look at the list of 89 three-phase motor manufacturers and their company rankings. Here are the top-ranked three-phase motor companies as of April, 2024: 1.U.S. Tsubaki Inc., 2.Powertronic Drive Systems GmbH, 3.Technische Antriebselemente GmbH.
Table of Contents
What Is a Three-Phase Motor?
Three-Phase Motor is an electric motor driven by a three-phase AC power source.
They are widely used as power sources for industrial equipment and machinery. Also called three-phase induction motors (induction motors), they are generally powered by a three-phase AC power supply of 200 VAC.
Three-Phase Motors consist of a stator, rotor, output shaft, flange bracket, and ball bearings.
Usage of Three-Phase Motor
AC power supplies are classified as single-phase and three-phase. Single-phase is an AC power source mainly used in general households. On the other hand, three-phase motors are mainly used in the industrial field.
Specific applications of Three-Phase Motors are as follows
- Compressors
- Pumps
- Fans
- Belt conveyors
- Cranes
- Motors for EVs
Three-Phase Motors have a wide range of applications and are used in many industrial machines other than those listed above.
Among Three-Phase Motors, there are also stepping motors and servo motors, which are used to precisely control rotation. These are used in the use of automated machinery such as industrial articulated robots.
Principle of Three-Phase Motor
In Three-Phase Motors, three-phase AC power with a phase shift of 120 degrees is applied to the coils of a stator, and the coil to an electromagnetic steel plate becomes an electromagnet, forming a magnetic field inside the motor. The polarity of the electromagnet is determined by the direction of the current flowing through the coil and the right-hand thread law.
Since the AC power source is out of phase with time, the direction of the magnetic field rotates with time.
Figure 1 shows the principle of generating a rotating magnetic field. As the phases of the U, V, and W phases of the three-phase AC power supply change, the direction of the stator's magnetic field changes (in Figure 1, the rotating magnetic field rotates counterclockwise).
Figure 1. The principle of rotating magnetic field generation
The rotation of the magnetic field generates eddy currents to the rotor, and the eddy currents and the magnetic field generate a force on the rotor. As a result, power is generated on the motor's rotating shaft. The direction of the rotational force of the motor is determined by Fleming's left-hand rule.
The speed of the rotating magnetic field as the rotor rotates is called the synchronous rotation speed. The synchronous rotation speed can be calculated from the frequency of the power supply and the number of stator poles.
The actual rotational speed of the rotor is slightly slower than the synchronous rotational speed. This is because the magnetic flux crossing the rotor conductors generates an induced current that causes the rotor to rotate.
The difference between the synchronous rotation speed and the actual rotation speed is called "slip." The greater the load torque, the greater the slip. The output (W) of a motor can be calculated from its rated rotational speed and rated torque.
Other Information on Three-Phase Motors
1. Wiring for Three-Phase Motors
Three-Phase Motors are wired differently depending on the starting method. Four types of starting methods are introduced here.
Direct-in Starting
Three-Phase Motors are started by applying three-phase AC power directly to their terminals via an electromagnetic contactor. Wiring is easy, but the current flowing through the motor during starting (starting current) is large, several times the rated current.
This method is often used with small capacity motors that require a low starting current.
Star-Delta Starting
This is a starting method that starts with star wiring and then switches to delta wiring.
There are two types of motor wiring: star-wired and delta-wired (Figure 2). Star-wiring requires only 1/3 of the starting current of delta-wiring, so it is the starting method used for Three-Phase Motors with a high rated current.
Figure 2. Star and delta connections
The terminal box of a star-delta starting motor has six terminals (U, V, W, X, Y, and Z). Outside the stator windings is a circuit that combines an electromagnetic contactor and a timer to automatically switch between star and delta wiring.
Reactor Starting
A reactor is connected between the Three-Phase Motor and the power supply at startup, and the circuit of the reactor is disconnected with an electromagnetic contactor and timer a short time after startup.
Inverter Starting
An inverter is an electrical device that controls the speed of a Three-Phase Motor (Figure 3). It can freely change the output and frequency of the three-phase AC power supply.
By installing an inverter, the motor can be started from a low frequency of a few Hz and the starting current can be reduced.
Figure 3. Three-phase motor and inverter
2. Rotational Speed of Three-Phase Motor
The formula for the number of revolutions is 120 x the frequency of the AC power source/number of poles.
For example, for a 4-pole motor with a 50 Hz power supply, the number of revolutions is 120 x 50 ÷ 4 = 1500 rpm.
However, Three-Phase Motors rotate with a slight lag behind the power supply frequency. This delay is expressed as the slip ratio. If the slip ratio is 5%, the speed will be 1500 x (1-0.05) = 1425 rpm.
To control the speed of a Three-Phase Motor, either the frequency or the number of poles must be controlled, but the number of poles cannot be changed because of the structure of the motor. Therefore, the frequency must be changed to control the speed. Currently, inverters are the most common way to control the speed of Three-Phase Motors.
List of 89 Three-Phase Motor Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- Canada
- China
- Czech Republic
- France
- Germany
- India
- Italy
- Japan
- Poland
- Republic of Korea
- Romania
- Singapore
- Spain
- Switzerland
- Turkey
- United Kingdom
- Vietnam
-
-
-
TECO-Westinghouse
Motors
Manufacturer Overview
Teco-Westinghouse, founded in 1997 and based in Round Rock, Texas, USA, is a manufacturer of electric motors, generators, and EV chargers. The company's product portfolio includes single-phase ODP motors, induction motors, DC motors, and EV chargers and its products are certified by NVLAP and IATF. The company also provides renewable parts and services for motor repair and testing. The company serves industries such as oil and gas, mining, and water and wastewater.
-
-
-
-
-
Siemens USA
motors
Manufacturer Overview
Siemens USA was established in Washington D.C. in 1988, and is the American branch of Siemens AG, the German manufacturer, supplier, and distributor of automation, electrification, and digitalization products established in 1847. The company’s extensive product portfolio includes smart infrastructure products, power generation and transmission products such as gas turbines and transformers, and medical imaging as well as laboratory diagnostics products such as CT scanners and MRI machines. It also offers mobility products and automation management software. The company operates throughout North and South America, and is certified to ISO 9001, ISO 14001, ISO 27001, and OHSAS 18001 standards.
-
-
-
-
-
Columbus McKinnon Corporation
Black Max Motors
Manufacturer Overview
Columbus McKinnon Corporation, founded in 1875 and headquartered in Charlotte, North Carolina, is a manufacturer of intelligent motion products used for automation, conveyance, lifting, and linear motion. Its product range includes handheld transmitters, flexible chain conveyors, lever hoists, industrial linear actuators, and pallet systems used in several industries, including aerospace, entertainment, automotive, metals production, and pharmaceutical. The company is ISO 9001 certified and has manufacturing facilities across Africa, Asia, Europe, Latin America, and North America. It has several brands, including STAHL Crane Systems, Dorner Conveyors, Duff-Norton, Magnetek, and Unified Industries.
-
-
-
-
-
ABB Motors and Mechanical Inc
Three Phase Enclosed Motor
Manufacturer Overview
ABB Motors and Mechanical Inc., founded in 1920 and with headquarters in the USA, is a custom manufacturer and marketer of industrial electric motors, drives, and mechanical power transmission products. The company's products include AC/DC, gear, synchronous, variable speed servo motors, and permanent magnet motors produced in over 20 plants across North America, China, and Mexico for the HVAC, chemical, food and beverage, oil and gas, and wastewater industries, among others. ABB Motors and Mechanical Inc. also holds an ISO 9001:2015 certification.
-
-
-
-
-
Hiwin Corporation
Three-Phase Motors
Manufacturer Overview
Hiwin Technologies Corp. was established in 1989 in Taichung, Taiwan, with subsidiaries across Asia, Europe, and the United States. The company is the first linear motion and motion control product manufacturer in the world to attain ISO-9001 and ISO-14001 certification and serves industries such as medical laboratories, packaging, metal fabrication, and general automation. The company uses CAD technology to design products such as linear guideways, ball screws & supports, torque motors, and industrial robotics machines.
-
-
-
-
-
Elinco International JPC, Inc.
Three-Phase Motors
Manufacturer Overview
Electric Indicator Company (ELINCO) is an ISO 9001:2015 certified company founded in 1926 in Stamford, Connecticut. Founded in 1969, Japanese Products Corporation (JPC) was acquired by ELINCO in 1991. The company focuses on the design and manufacturing technology of motors, air-moving devices, and drives. Products include brushless DC motors, stepper motors, PMDC motors, AC motors, planetary gearboxes, encoders, fans, and blowers. The main markets of the company are communication, industrial automation, medical technology, office automation, security, home automation, and automotive.
-
-
-
-
-
Maedler North America
Three-Phase Motors
Manufacturer Overview
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
-
-
-
-
-
Optimal Engineering Systems, Inc.
Three-Phase Motors
Manufacturer Overview
Optimal Engineering Systems, Inc. (OES) was established in 1985 and headquartered in Los Angeles, California. The company is a manufacturer of motion control products for OEMs and other customers across industries ranging from aerospace, astronomy, manufacturing, medical, and semiconductors. The company provides in-house components manufacturing with a wide variety of components available off the shelf and the ability to custom-build sub-assemblies for customers worldwide. The company’s product lines include motor control systems, motorized stages, and solenoid control electronics.
-
-
-
-
-
Wisconsin Oven Corporation
Three-Phase Motors
Manufacturer Overview
Wisconsin Oven Corporation has operated since 1973 and is located in East Troy, Wisconsin. Wisconsin Oven designs, engineers, and manufactures industrial ovens and other heating equipment for numerous applications including heat treating, powder coating, paper pulp drying, finishing, drying, and curing in the aerospace, automotive, composite, energy, finishing, foundry, heat treating, annealing, military, and pharmaceutical industries. Types of ovens and equipment include custom and standard batch ovens, conveyor ovens, pollution control equipment, and walk-in ovens.
-
-
-
-
-
Bearings & Industrial Supply Co., Inc.
Three-Phase Motors
Company Overview
Bearings Industrial Supply Company, Inc (BIS) was founded in 1982 in Addison, Illinois. The company is a supplier and distributor of bearings, seals, belts, power transmission parts, and a variety of other industrial supplies to small and large customers such as Boeing and Toyota. The company isources from manufactureres such as Emerson, KOYO, Tsubaki, NTN, and Timken. The company's offerings include numerous types of bearings, many varieties of seals, several different belts, AC and DC motors, and power transmission components.
-
-
-
-
-
Pelonis Technologies, Inc.
Three-Phase Motors
Company Overview
Pelonis Technologies, Inc. was founded in the 1990s in Exton, Pennsylvania. Pelonis technologies is a manufacturer and distributor of air movement technologies and specialty heating products for commercial and industrial use. Pelonis Technologies is ISO 9000 and ISO 14000 certified. Pelonis Technologies has 3 main standard product segments in cooling, heating, and motors & motion control. Cooling products include fans, blowers, micro cooling, and automotive fans & blowers. Heating products include PTC heaters, temperature controllers, and immersion heaters. Motors & motion control include micro, planetary, AC, and medical micro motors. Custom solutions include AC and DC fans and blowers.
-
-
-
-
-
Nidec Motors
Three-Phase Motors
Company Overview
Nidec Corporation traces its roots all the way back to 1908. The company has established itself as an international conglomerate that handles virtually everything that spins and moves. Through its over 300 subsidiaries across the globe, the company manufactures motors that run the spectrum from tiny precision motors in cell phones to motors powering heavy commercial and industrial equipment. The company and its subsidiary's power devices and machines are used in many industrial and personal sectors including agriculture, exercise equipment, HVAC, and refrigeration. Products and services include many varieties of motors, drives, and generators.
-
-
-
-
-
ebm-papst
ECI brushless internal rotor motors
Distributor Overview
ebm-papst, founded in 1963 and based in Mulfingen, Germany, is a supplier of ventilation and drive technology. Its product range encompasses compact fans, axial fans known for its efficiency and low noise, centrifugal fans available in DC and AC technology, tangential blowers ideal for high air flow in limited spaces, and blowers used in heating systems and household appliances. These products are integral for driving, ventilating, cooling, and air-conditioning various systems. Notably, the company is known for its quality management system that often surpasses international standards and has received accolades like the BdKomm-Award and environmental pioneer awards.
-
-
-
-
-
Sinotech
Three-Phase Motors
Distributor Overview
Sinotech is based in Portland, Oregon with offices in China. Sinotech is a distributor for custom-engineered electrical motors, motor components, and mechanical components manufactured in China. Sinotech’s motors include AC motors, DC motors, brushless DC motors, slotless high speed BLDC motors, stepper motors, cordless motors, gear motors, servo motors, and miniature motors. Motor components include laminations, wound coils, armature and field coils, brushes, and communicators. Mechanical components include assemblies, die castings, investment castings, sand castings, shafts, steamed metal parts, tubular metal parts, machined extrusions, plastic parts, rubber parts, and secondary processing.
-
-
-
-
-
HANGZHOU CHINABASE MACHINERY CO., LTD.
Motor
Manufacturer Overview
Hangzhou Chinabase Machinery Co., Ltd., founded in 1992 and based in Hangzhou, China, is a manufacturer specializing in an array of products, including power transmission components. Its key products encompass chains and sprockets for industrial power transmission, gearboxes to enhance torque and reduce speed, couplings for shaft connections, and gears used across industrial applications. Its products find applications in automation, conveyor technology, packaging, food, pharmaceuticals, and more. The company maintains quality and sustainability, holding certifications like ISO 9002, ISO 9001, API, ISO/TS 16949:2002, and ISO 10012 measurement management system.
-
-
-
-
-
WEICHAI POWER CO.,LTD
Three-Phase Pure Electric System
Manufacturer Overview
WEICHAI POWER CO.,LTD was founded in 2002 and is a manufacturer of powertrain, vehicle, and machinery products based in Weifang, China. The company manufactures various products such as towing engine, bus axles, auto transmission gearboxes, trucks, and displacement pumps. The products have been used in various markets such as construction machine, agriculture machine, automotive, manufacturing, and new energy. The company has obtained the certification of ISO 9002:1996, QS-9000, ISO/TS16949, and ISO 14001.
-
-
-
-
-
Andritz AG
Submersible motors
Manufacturer Overview
Andritz AG was initially founded as a much smaller company back in 1852 as an iron foundry, but today the company is a manufacturer and supplier of a wide range of industrial machinery, chemicals, fuels, and textiles, among many more. The company's product portfolio includes over 20 core areas: pulp and paper, metals, cyber security, feeds, and biofuels. Examples include decanter centrifuges, mechanical separation extractors, contact and paddle dryers, and batch helix dryers used in the environment, chemicals, food and beverage, and mining industries. Secondary services include the supply of spare parts, rentals, process consulting, and on-site repairs and upgrades.
-
-
-
-
-
ACT MOTOR Co., Ltd
THREE-PHASE HYBRID STEPPER MOTOR
Manufacturer Overview
ACT Motor Co., Ltd. was established in 2010 and based in Bremen, Germany, as a manufacturer of motion control equipment. It specializes in manufacturing hybrid stepper motors like gearbox stepper motors and brake stepper motors. It also manufactures linear actuators, stepper drivers, DC motor drivers, spindle motors, and servo motors. The company is CE-certified and in compliance with EU RoHS standards. It has obtained ISO 9001:2015 and ISO 9001: 2008 certifications. Its manufactured products are utilized in appliances, electrical, electronics, industrial, and robotics sectors across Europe and China.
-
-
-
-
-
MSF-Vathauer Antriebstechnik GmbH & Co KG
Three-phase AC motors
Manufacturer Overview
MSF-Vathauer Antriebstechnik GmbH & Co KG is a German manufacturer of drive technology and automation technology products established in 1978 and based in Detmold, North Rhine-Westphalia. The company produces various standard drives for controlling movement of electric motors, decentralized drives that communicate with the central controller, and servo drives for precision automation operations. It also offers electronic motor brakes, digital tact-switching devices (DTSG), and energy recovery system (ERS) units. The company offers drive and system customization services for clients with unique project specifications.
-
-
-
-
-
Lenze SE
three-phase AC motors
Manufacturer Overview
Lenze is a company established in 1998 by the founder Hans Lenze and it is a developer and manufacturer of integrated automation solutions. This company manufactures products such as IoT, controllers, inverters, geared motors, motors, gearboxes, accessories, and software. Additionally, Lenze provides drive components for machines and installations. The company has served industries including converting and printing, airport logistics, warehouses, textile, and packaging. Furthermore, Lenze is ISO certified. Their support section offers software downloads and a knowledge base for assistance.
-
-
-
-
-
Maxon
AC Motors
Manufacturer Overview
maxon, a company established in 1961, based in Sachseln, Switzerland, is a manufacturer and exporter of high-precision drive systems and components. The company advanced product solutions for various industrial and medical applications such as robotics, aerospace, automotive, prosthetics, and surgical devices. It has a range of products such as brushed and brushless DC motors, gearheads, encoders, controllers, and sensors. These products are designed to operate with high performance, quality, and reliability.
-
-
-
-
-
3X Motion Technologies Co., Ltd.
HYBRID STEPPER MOTOR
Manufacturer Overview
3X Motion Technologies Co. Ltd, established in 2002 and headquartered in LuCheng Changzhou, China, is a manufacturer and designer specializing in control motor solutions. The company offers a range of products, such as hybrid stepper motors, brushed DC geared motors, and brushed DC motors. These products are widely used in various applications, including industrial automation, security systems, and automatic doors. Additionally, the company offers unique customization options and complete engineered systems, tailored to meet specific customer needs.
-
-
-
-
-
Powertronic Drive Systems GmbH
Induction motors
Manufacturer Overview
Powertronic Drive Systems GmbH, established in 1971 and headquartered in Berlin, Germany, is a manufacturer that specializes in drive technology. The company offers a range of drive technology, including DC motors, geared motors, stepper motors, and AC motors. It also provides customized solutions according to customer requirements. Its products are designed to provide performance with low noise and durability. The company is certified by TÜV Rheinland according to ISO 9001:2015. It serves a range of industries such as chemical, power generation, paper and pulp, renewable energy, and more.
-
-
-
-
-
CRRC Zhuzhou Electric Co.,ltd
Inverter-fed Asynchronous Motor for Oil Drilling Machine
Manufacturer Overview
CRRC was established in 1961 and is a manufacturer of railway traction products, wind power generators, and industrial electric motors based in Zhuzhou, China. The company manufactures various products such as air-cooling double-fed wind-driven generator, asynchronous traction motor, rubber wheel permanent magnet synchronous motor, intelligent transformer substation, and brake resistance gate cooling fan. The products have been used in various industries such as railway, green energy, manufacturing, and transportation. The company has passed the certification of ISO 9001:2000, ISO 14001:2004, and OHSAS 18001:1999.
-
-
-
-
-
DANA TM4 INC
ASY 120 series
Manufacturer Overview
DANA TM4 INC is based in Boucherville, Quebec, and is a Canadian manufacturer of electric as well as hybrid powertrain systems that was founded in 1998 as a joint venture between Dana Incorporated and Hydro-Québec. The company’s specialized product portfolio includes traction or auxiliary inverters, induction electric motors, and bi-directional charger inverters for electric or hybrid vehicles. It also offers technical support and inverter coupling customization services for customers needing additional assistance. The company’s products have applications in the transportation, motorsports, and recreational vehicle markets.
-
-
-
-
-
Neff Gewindetriebe GmbH
THREE-PHASE MOTORS
Manufacturer Overview
Neff Ballscrews is a German manufacturer specializing in ballscrews, linear actuators, and motion control products, established in 1952. The company offers a diverse product range, including Acme, Roller, and Spherical ballscrews, as well as linear actuators. These products serve the machine tool, automation, and robotics sectors. Neff Ballscrews also provides engineering services, customization, and repair and maintenance services to meet specific customer requirements. With a global presence, including offices in the United States, China, and Japan, Neff Ballscrews has over 70 years of industry expertise. They are committed to innovation and consistently deliver high-quality products and excellent customer service.
-
-
-
-
-
GEORGII KOBOLD GmbH & Co. KG
Three-Phase Asynchronous Motors KOD
Manufacturer Overview
GEORGII KOBOLD GmbH & Co. KG was founded in 1924 and is a manufacturer of premium electromechanical drive system based in Horb am Neckar, Germany. The company manufactures various products such as torque motors, hygienic motors, synchronous servo motors, digital AC servo drive systems, and KOBOLD magnetically-geared motors. The products have been used in various industries such as food, medical, pharma, and general automation. The company has passed the certification of ISO 14001 and ISO 9001 standards.
-
-
-
-
-
UMEB ELEKTROMOTOREN
EXPLOSION-PROOF MOTORS IE2, IE3
Manufacturer Overview
UMEB S.A., founded in 1948 and located in Bucharest, Romania, is a manufacturer specializing in low-voltage rotating electrical machines and generating sets. The company offers an array of products, including motors for hoisting unit drives, high-efficiency explosion-proof electric motors, and diesel generating sets among others. It provided the 360 ATEX motors powering 120 LPG gas station reservoirs for Naftal Algeria, a subsidiary of Sonatrach. These machines have applications in various industries, such as petrochemical, city traction, and power supplies through three-phase synchronous generators.
-
-
-
-
-
Orange1 Holding
Asynchronous vectorial motor – MQ Series
Manufacturer Overview
Orange1 Holding, established in 1971 and based in Piazza della Repubblica, Milan, is a manufacturer specializing in single-phase and three-phase asynchronous electric motors, foundry and turning parts. Its product portfolio encompasses single-phase and three-phase asynchronous electric motors, foundry and turning components, and drives for electric motors. These products have wide-ranging applications in industries like automotive, railways, and industrial sectors. The company's manufacturing capabilities extend to asynchronous motors up to 3700 kW, synchronous motors up to 2700 kW, hydroelectric generators up to 3000 kW, and wind turbines up to 5000 kW.
-
-
-
-
-
WINKELMANN Elektromotoren GmbH & Co. KG
AC Motors
Manufacturer Overview
WINKELMANN Elektromotoren GmbH & Co. KG, founded in 1921 and based in Uelzen, Germany, is a manufacturer of three-phase and DC motors. The company offers an array of products, including motors with ignition protection, PSM synchronous motors, and auxiliary equipment. Additionally, it provides various services, including integration of system modules, installation and commissioning, and repairs and spare parts. These products and services have applications in diverse industries such as power supplies and distribution, industrial automation, and the petrochemical sector.
-
-
-
-
-
Industria Scientifica Generale Elettromeccanica Vicenza S.p.A.
CAST-IRON THREE-PHASE ASYNCHRONOUS MOTORS
Manufacturer Overview
Industria Scientifica Generale Elettromeccanica Vicenza S.p.A., founded in 1948 and based in Quinto Vicentino, is a manufacturer of electric motors. The company offers an extensive product catalog, including cast iron three-phase asynchronous motors, aluminum three-phase asynchronous motors, voltage regulators, rotating frequency converters, three-phase asynchronous marine motors, and motors designed for extreme temperatures. These motors have applications in pasta production, air conditioning systems, fluid circulation equipment pumps, braking system compressors, and cabin ventilation and air conditioning systems.
-
-
-
-
-
I.M.E. INDUSTRIA MOTORI ELETTRICI S.p.A.
Asynchronous Motors
Manufacturer Overview
I.M.E. INDUSTRIA MOTORI ELETTRICI S.p.A. was founded in 1972 and is a manufacturer of electric motors based in Manerbio, Brescia, Italy. The company offers range of electrical motors products including wound commutator rotors, EC brushless motors, permanent magnet motors, asynchronous motors, and vacuum motors. The company has obtained the ISO 9001:2015 certification for the IME quality system. 7 products from the line up have been registered for international patents for the innovation and solution to the industries.
-
-
-
-
-
Power Jacks Limited
Standard 3-phase
Manufacturer Overview
Power Jacks Limited founded in Westhill, Aberdeenshire, Scotland, UK, in 1987, is a manufacturer of electro-mechanical actuation, lifting, and positioning equipment. Products offered by the company are screw jacks, electric linear actuators, bevel gearboxes, lead screws, and jacking systems. The company also provides customized products. Its planetary roller screws convert rotary motion to linear motion using threaded spindles that provide huge load capacity and precise positioning. The company’s products are used in industrial automation, defense, energy, transport, and civil engineering industry sectors.
-
-
-
-
-
Dunkermotoren GmbH
AC Motors
Manufacturer Overview
Dunkermotoren GmbH, launched in 1950 in Schwarzwald, Germany, is a manufacturer and developer of motor solutions for building automation, healthcare, mass transit, and food industries. It makes electrical drive products like brushless DC motors, Venetian blind drives, linear systems, stepper motors and brakes in its production facilities in Germany, China, Serbia, Italy and the Czech Republic. The company has participated in SPS smart production solutions, Smart Factory and Automation World, Agrishow Brazil, and Agritechnica trade fairs.
-
-
-
-
-
Rehfuss Drive Solutions GmbH.
Electricmotors
Manufacturer Overview
Rehfuss Drive Solutions GmbH is a German manufacturer of special drives and related products that was established in Albstadt, Baden-Württemberg in 1951. The company primarily produces special drives such as planetary, helical, and bevel gearboxes. These include electronic and mechanical variable speed drives, as well as various geared motors including helical and parallel shaft models. It also offers custom design and production services for unique projects. The company’s products are used by its clients in the chemical, water and wastewater processing, textiles, and leather goods industries.
-
-
-
-
-
Hangzhou Ocean Industry co.,Ltd.
YD Series Pole-Changing Multi-Speed Three-Phase Asynchronous Electric Motor
Manufacturer Overview
Hangzhou Ocean Industry Co., Ltd. is a manufacturer and a supplier of transmission spare parts, headquartered in Century City District, Hangzhou, China. The company offers a full range of products, including chains, sprockets, couplings, timing pulleys, and V-belt pulleys. Additionally, it provides shafts, gears, gear racks, and various other transmission spare parts. All of its production procedures adhere to ISO9002 standards. Moreover, it possess the capability to design and manufacture non-standard products to fulfill specific customer requirements.
-
-
-
-
Manufacturer Overview
STM S.p.A., established in 1976 and headquartered in Via del Macci Breccia, Italy, is a manufacturer that specializes in producing gearboxes and geared motors. The company designs and manufactures gear reducers, gear motors, and variators. It also offers high-tech gearboxes, worm gearboxes, and torque limiters. Its product is designed to increase resistance to torsional and structural flexibility. Furthermore, the company has achieved the Directive ATEX 2014/34/UE certifications. It serves various industries, including the chemical, conveyor, and lifting industries.
-
-
-
-
-
BEA INGRANAGGI SPA
Three-Phase Asynchronous Motors TA series 4-Poles
Manufacturer Overview
Bea Ingranaggi SPA, established in 1960 and headquartered in Cavaria Con Premezzo, Italy, is a manufacturer of standard and special products. The company offers a wide range of products, including chain transmission, worm gears, belt drive, and chain drive. It also offers couplings, clamp elements, pulleys, gears, and electric motors. Its worm gear can transmit power at a right angle, making it useful in tight spaces. The company serves a range of industries, including automotive, mechanical engineering, and agriculture.
-
-
-
-
-
Hitachi, Ltd.
Industrial Electric Motor
Manufacturer Overview
Hitachi, Ltd was established in 2002 and headquartered in Chiyoda-ku, Tokyo is a manufacturer of industrial electrical equipment and system solutions. The company offers an extensive and diversified product portfolio including industrial drive systems, power electronics, energy-related equipment, power distribution systems, and various other industrial solutions. These products serve as integral components that drive advancements in industrial capabilities across diverse sectors by playing a pivotal role in promoting energy conservation and storage, automating robot systems in large factories, enabling smarter manufacturing through digital solutions, and facilitating efficient transportation within industrial facilities.
-
-
-
-
-
Taizhou Dongchun motor Co., ltd
three phase motor
Manufacturer Overview
Taizhou Dongchun Motor Co., Ltd., founded in 2010 and located in Zhejiang, China, is a manufacturer of electric motors. The company’s broad range of products includes brake motors, VFD motors, single-phase motors, and three-phase motors. These electric motors find general use across industries and applications, powering an array of machinery, equipment, and systems. The company’s product-specific applications include industrial machinery, agricultural equipment, HVAC systems, automation and robotics, and transportation. The company’s products serve as crucial components for generating motion and power in numerous mechanical and electrical operations in both industrial and consumer contexts.
-
-
-
-
-
Cantoni Motor S.A.
Three-phase motors
Manufacturer Overview
Cantoni Motor, founded in 2000 and headquartered in Bielsko-Biała, Poland, is a manufacturer of electric motors, brakes and relevant tools. The company's main product line consists of a range of electric motors with varying specifications like standard, high and premium efficiency, single phase, high voltage, multi speed and explosion proof motors. These motors find application in many industrial sectors such as marine, oil and gas, chemical, construction and energy. It also offers a range of electromagnetic disc brakes, powder brakes and clutches. The company has obtained various quality certifications including ISO, OHSAS and ATEX.
-
-
-
-
-
Neri Motori S.R.L.
Three-phase motors
Manufacturer Overview
Neri Motori S.R.L., established in 1946 and headquartered in Bologna, Italy, is a manufacturer of electric motors. The company specializes in the design and production of asynchronous and synchronous electric motors. Some of the products that the company offers include single-phase motors, three-phase motors, brake motors, and more. These products are used in diverse applications, including pumps, fans, compressors, and conveyors. The company bases its operations on rigorous quality standards, adhering to the UNI EN ISO 9001 Quality Management System applied to all production phases and business processes.
-
-
-
-
-
motive srl
Three-phase motors
Manufacturer Overview
Motive Srl, established in 2000 and headquartered in Castenedolo, Italy, is a manufacturer of electric motors, gearboxes, and drive systems. Some of the products that the company offers include asynchronous motors, brake motors, gearboxes, as well as frequency inverters, and servo drives. These products are used in diverse applications, including material handling, packaging, food processing, and automation. The company holds several certifications such as ISO 9001, AEO, ISO 80079, and ISO 7025.
-
-
-
-
-
NORD
Three-phase motors
Manufacturer Overview
NORD is a global manufacturer of drive technology and automation solutions, founded in 1965, and headquartered in Bargteheide, Germany. Their comprehensive range covers gear units for seamless power transmission; motors to drive various machinery; frequency inverters for precise speed control; rugged industrial gearboxes for heavy-duty applications; and drive electronics for seamless integration. NORD drive components are calculated according to DIN 3990, NIEMANN, and AGMA. The certification according to DIN ISO 9001 documents their commitment to quality management.
-
-
-
-
-
Shanghai Electrical Machinery Group Co Ltd
YVFZ three phase AC motor
Manufacturer Overview
Shanghai Electrical Machinery Group Co Ltd., established in 2010 and headquartered in Shanghai, China, is a manufacturer that specializes in energy equipment, industrial equipment, and integration services. The company has a wide range of products, including thermal power equipment, nuclear power equipment, wind power equipment, power transmission and distribution equipment. It also provides elevators, machine tools, and automation equipment. Its product leads to reduced emissions, which can have a positive impact on the environment. The company has achieved ISO 14001:2004 Certification for its environmental management systems. It serves several industries, including energy, environmental protection, industrial automation, and elevators.
-
-
-
-
Manufacturer Overview
B&R Industrial Automation GmbH, founded in 1979 with headquarters in Austria, is a manufacturer of automation technology, including a complete portfolio of robotics, automation, and software. The company's standard and tailored products are used in the automotive, maritime, medical device assembly, packaging, and plastics markets, among many others. The product line includes industrial PCs, I/O systems, robotics, and software for industrial components. B&R joined the ABB Group in 2017 to specialize in the integration of technology and sophisticated engineering to provide industries with solutions for machine and factory automation, motion control, and integrated safety technology.
-
-
-
-
Oswald Elektromotoren GmbH
FQD COMPACT ASYNCHRONOUS MOTORS / -GENERATORS
Manufacturer Overview
Oswald Elektromotoren GmbH, established in 1909 and headquartered in Germany, is a manufacturer of custom electric motors and generators. The company designs and produces various torque, asynchronous, and linear motors tailored for civil engineering applications. These products range from 10 kW to 5,000 kW in power and are optimized for specific customer needs, leveraging modern measuring devices, CAD systems, and powerful computing resources. The company’s offerings significantly increase productivity and energy savings in various industries.
-
-
-
-
-
VEM GmbH
Slip-ring induction motors
Manufacturer Overview
VEM GmbH was established in 1997 and is a manufacturer of drive solutions, custom drives, and single components based in Dresden, Germany. The company manufactures various products such as IEC standard motors, permanent-magnet synchronous motors, frequency converter, compact drives, and slip ring induction motors. The products have been used in various industries such as rolling mills, power plant technology, water management, renewable energy, and transport technology. The company has obtained the certification of ISO 9001, ISO 14001, ISO 50001, ATEX-Directive 2014/34/EU, and DIN EN 15085-2.
-
-
-
-
-
NGB Elram Industries Ltd.
Three Phase Electrical Motor
Manufacturer Overview
NGB Elram Industries Ltd., established in 1982 and headquartered in Tsur Igal, Israel, is a conveying solutions manufacturer and supplier. The company's products include conveying belts, conveying and transmission chains, and conveyor components. It also supplies thermoplastic bearing units and plastic modular belts and specializes in the design, manufacture, and supply of mechanical, electrical, and control drive systems for livestock houses and greenhouses. The company's services include the supply of spare parts and maintenance programs.
-
-
-
-
-
Wolong Electric Group
Standard Induction
Manufacturer Overview
Wolong Electric Group is a Chinese ISO 9001 certified manufacturer of motors and control equipment established in 1984 and based in Shaoxing City, Zhejiang Province. The company's product portfolio includes high-voltage motors for power generation, switchgears, micro-motors for home appliances, transformers for power distribution, and uninterruptible power supply (UPS) units. It also offers industrial-grade products such as automation power supply solutions and EC motors for HVAC systems. The company's products are mainly used by clients in the water and wastewater treatment, home appliance manufacturing, mining, and petrochemical sectors.
-
-
-
-
-
U.S. Tsubaki Inc.
Three-Phase Motors
Manufacturer Overview
U.S. Tsubaki Power Transmission LLC., founded in 1971 and based in Wheeling, Illinois, is a manufacturer and supplier of motion control and power transmission products and is ISO 9001 certified. Its products include sprockets, conveyor chains, and roller chains used in several industries, including automotive, primary metals, and forest products. It’s a subsidiary of the Tsubakimoto Chain Company, and it has several manufacturing facilities in the United States, including Milwaukee (WI), Sandusky (OH), and Chicopee (MA). The company sells its products through distribution channels but can sell directly to qualified OEMs.
-
-
-
-
-
ABB E-mobility
Three-Phase Motors
Manufacturer Overview
ABB E-mobility provides electric vehicle charging solutions for customers around the globe. ABB E-mobility offers DC fast chargers as well as AC chargers with focus on reliability and uptime. Since 2010, ABB E-mobility has sold over 50,000 DC fast chargers and over 1 million total AC chargers. ABB E-mobility offers home single and multi-charge units, retail, workplace, and hospitality charge units, electric vehicle fleet sales, as well as public transportation. Additionally, numerous digital solutions and software services are available.
-
-
-
-
-
Oriental Motor U.S.A. Corp.
Three-Phase Motors
Manufacturer Overview
Oriental Motor USA Corp., established in 1978 and based in Torrance, California, is a manufacturer of motors and control systems and is ISO 9001 and ISO 14001 certified. The company stocks over 50,000 products that it sells worldwide, including actuators, motors, and controller products used in several industries like the medical, semiconductor, and factory automation industries. In 1983, the company developed brushless DC fans, and it later developed watertight, dust-resistant motors in 1990. In 1991, it came up with motorized linear slides and motorized cylinders.
-
-
-
-
-
Hong Ky Corporation
Iron body electric motor
Company Overview
Hong Ky Corporation was established in 1986 and is a manufacturer and distributor of welding transformers and cutting machines based in Ho Chi Minh, Vietnam. The company offers various products such as inventer arc welding machine, electronic spot welder, bench drilling machine, flange aluminum electric motor, and cut-off saw cutting machine. These products serve various industries, including automotive, steel, woodworking, packing, and welding. The company has obtained ISO 9001:2015 certification, passed the CE Marking standard, and received certification as "High-Quality Vietnam Goods" and "Trusted Green" in Vietnam.
-
-
-
-
-
Brown Advance, S.A.
MOTORES ELÉCTRICOS
Company Overview
Brown Advance, S.A. is a Spanish ISO 9001 certified manufacturer and distributor of mechanical transmission products founded in 1962 and based in Cervelló, Barcelona. The company produces standard or precision gearboxes, transmission components, and slew drives. It also offers drum motors for conveyor belts, as well as specialized components for solar tracking systems. Aside from its products, the company offers additional product customization, technical support, and personnel training services. It mainly serves clients in the automotive, mining, and renewable energy sectors.
-
-
-
-
-
Fuzhou Wonder Electric Co., Ltd.
SSWEA Series
Company Overview
Fuzhou Wonder Electric Co., Ltd. was founded in 1988 and is headquartered in Fujian, China is a manufacturer and supplier of electric motors. The company offers an extensive product catalog, including synchronous reluctance motors, permanent magnet motors, and TEFC cast iron motors among others. These products have applications in water treatment industries, water collection and irrigation, and pulp and paper industries. In 2020, the Wonder electric servo motor and controller for the robot and CNC machining Center project qualified for acceptance.
-
-
-
-
-
MENZEL Elektromotoren GmbH
Squirrel cage motors
Company Overview
MENZEL Elektromotoren GmbH was founded in 1927 and is a manufacturer and supplier of custom electric drive products based in Berlin, Germany. The company manufactures various products such as asynchronous squirrel cage motors, asynchronous slip ring motors, and rotating converter sets. Various application scenarios and case studies have been done by the company, such as underground mine in Australia, coal mine conveyor belts, and oil refinery. The company has obtained the certification of DIN EN ISO 9001 for the quality management system, and has obtained recognition for BV Mode II Scheme.
-
-
-
-
-
Bonfiglioli S.P.A.
Three-phase motor
Company Overview
Bonfiglioli S.P.A., founded in 1999 and headquartered in Chennai, India, is a manufacturer and distributor of industrial automation, mobile energy and wind energy solutions. The company's business unit is categorised in wind & mobility, motion & robotics and discrete manufacturing and process industries. It designs and distributes gearmotors and electric motors, planetary gearboxes, drive systems, solar and servo inverters and winch, slew and travel drives. These products are used in various industries like construction, logistics, agriculture & forestry, marine and textile. The company has 21 international branches with 15 production plants and over 500 global distributors.
-
-
-
-
-
CIDEPA SINCRON, S.L.
3 Phase Motor & Electric Motors
Company Overview
CIDEPA SINCRON, S.L. founded in Alcalá de Guadaíra, Spain, in 1942, is a manufacturer and supplier of Gear Motors and Gearboxes. The company offers products including coaxial gear motors, speed reducers for animal feeding, parallel shaft gearboxes, and orthogonal shafts. It has developed a logistic system that allows it to send products the same day of order before 18:00 hours. The company’s products are ISO-14001 certified and it uses 6% of profits for research.
-
-
-
-
-
MICHAUD CHAILLY
Three-phase motors LS-LSES
Company Overview
Michaud Chailly, founded in 1923 and headquartered in Saint-Priest, France, is a manufacturer of mechanical transmission components and is ISO 9001 certified. Its products include bearings, sealing rings, torque limiters, lubrication systems, and fixation components used in quarries, maintenance, food processing, and heavy industries, among others. The company has 22 facilities around France and provides technical catalogs, including DVDs and CAD drawings, to assist customers in decision-making. It also works with several suppliers, including Tricoflex, Festo, Metabo, Blickle, and Exsto.
-
-
-
-
-
Mini Motor SPA
Three-phase motor
Company Overview
Mini Motor SPA, founded in 1965 and headquartered in Emilia, Italy, is a manufacturer of electric motors and gearmotors. The company's range of products include worm gear motors, coaxial and epicyclical, brushless servomotors with integrated drive, brushless servomotors, drives and frequency converters.These products are meant for packing, bottling, palletising, boxing, stacking and wrapping in various industries like food & wine, metalworking, ceramic & glass, cargo handling and pharmaceutical. The company has 5 branches worldwide and distributes its products to about 55 countries through a network of distributors.
-
-
-
-
-
Saddle Brook Controls
Three-Phase Motors
Company Overview
Saddle Brook Controls is a division of Ribble Engineering, which was founded in 1933 in Saddle Brook, New Jersey. Saddle Brook Controls is a manufacture as well as a designer, distributor, and support service provider of automation solutions for factory automation. Product groups include PLCs, controllers, Remote IO devices, HMIs, industrial computers, machine vision and inspection machines, motion devices, drives, motor controls, enclosures, circuit breakers, safety products, sensing and control products, power supplies, and UPS.
-
-
-
-
-
Clutch Engineering
Three-Phase Motors
Company Overview
Clutch Engineering Co. was established in 1960 and is headquartered in Canton, Connecticut. The company is a distributor and specialty fabricator of industrial power transmission components, providing specialized engineering solutions to their specific needs. Customers typically come from industries such as mining, power generation, water treatment, shipbuilding, and transit. The company works with manufacturers such as Easton, Wichita Clutch, SEW-Eurodrive, and Lesson. Products typically used in customers’ products include couplings, electrification units, friction & wear materials, and air starters.
-
-
-
-
-
Jamieson Equipment Co., Inc.
Three-Phase Motors
Company Overview
Jamieson Equipment Company (JEC) was founded in 1982 and located in the state of Georgia. JEC serves infrastructure-related industries including pavement with concrete, aggregate, and asphalt, chemicals, sewage and waste management, and agriculture and food. JEC sells, installs, retrofits, repairs, and offers training and troubleshooting for a range of components and tools from simple fittings to motion sensors to electronics to valves to actuators, cranes, mixers, silos, hoppers, and plants.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Technische Antriebselemente GmbH
Asynchronous motors
Company Overview
Technische Antriebselemente GmbH, established in 1964 and located in Hamburg, Germany, is a that provides technical drive elements and linear guiding systems. The company products include linear guides, roller guides, cam followers, ball screws, linear tables, and more. It also provides linear actuators and linear motors. Its products offer a reduction of energy consumption with motors from JVL. Moreover, it has achieved ISO 9001 certification. It is in the industry of engine, turbine, and power transmission equipment manufacturing.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ATB Schorch GmbH
Three-phase asynchronous machines with outputs up to 25,000 kW
-
-
-
-
-
Melucci S.r.l.,
Electrical Motors
Distributor Overview
Melucci, founded in 1974 and headquartered in Rimini, Italy, is a distributor of components for industrial plants and machinery. The company specializes in precision linear systems and offers complete solutions in the sizing of the linear axis by offering various products, ranging from linear ball guides to roller guides up to miniature guides, screws, ring nuts and other accessory components which allow application in any industrial sector. It offers tailor-made solutions with 3D CAD resources that allows its product's technical drawings to be downloaded and integrated in customer's projects.
-
-
-
-
-
CG Power & Industrial Solutions Ltd.
3 Phase Motors - Rolled Steel Body
Distributor Overview
CG Power & Industrial Solutions Ltd., established in 1937 and headquartered in Mumbai, India, is a supplier that designs and markets products related to power generation, transmission, and rail transportation. The company offers a range of products and services, including MV switchgear, VCB, PCVCB, GIS, and RMU. It also provides rail transportation equipment like traction motors, converters, cubicles, relays, and point machines. It offers turnkey solutions for transmission and distribution (T&D) through sub-station projects, engineering, procurement, and construction (EPC). The company has achieved ISO 9001 and ISO 18001 certification. It serves industries such as utilities, power generation, and rail transportation.
-
-
-
-
-
ATB Austria Antriebstechnik AG
3-phase induction motors 2-pole / 4-pole
Distributor Overview
ATB Austria Antriebstechnik AG is based in Styria, Austria, and is a supplier of electric drive systems that was originally established in 1919 before being acquired by China’s Wolong Electric Group in 2013. The company produces standard motors that comply with a range of international specifications and standards, customized motors tailored to client specifications or use cases, and complete drive systems. It also offers design-to-order motors, which are engineered from scratch for unique or singular use cases. The company chiefly serves its clients in Europe’s home appliances and aerospace markets, as well as within the industrial sector.
-
-
-
-
-
Hybrid Electronics Corporation
Three-Phase Motors
Distributor Overview
Hybrid Electronics is a global distribution specialist of electronic components, with access to over 50 million unique components. Among the markets HE serves are the aerospace, automotive, communications, defense, industrial, medical, national security, and test & measurement industries. In addition to components, HE also provides quality and compliance testing, counterfeit detection, upscreening, and other forms of quality control. Examples of component subtypes that HE offers include ICs, batteries, capacitors, semiconductor products, sensors, circuit protection, interconnectors, filters, optoelectronics, relays, switches, power supplies, and cables and cable assemblies.
-
-
Three-Phase Motor Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | U.S. Tsubaki Inc. |
3.5%
|
| 2 | Bearings & Industrial Supply Co., Inc. |
2.6%
|
| 3 | Powertronic Drive Systems GmbH |
2.2%
|
| 4 | Technische Antriebselemente GmbH |
2.2%
|
| 5 | Neri Motori S.R.L. |
2.2%
|
| 6 | MSF-Vathauer Antriebstechnik GmbH & Co KG |
1.7%
|
| 7 | MICHAUD CHAILLY |
1.7%
|
| 8 | Taizhou Dongchun motor Co., ltd |
1.7%
|
| 9 | Neff Gewindetriebe GmbH |
1.7%
|
| 10 | motive srl |
1.7%
|
Derivation Method
The ranking is calculated based on the click share within the three-phase motor page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Hitachi, Ltd.: 29,485
- Bonfiglioli S.P.A.: 4,000
- Dalian Dalmo Electric Motor Co., Ltd.: 208
Newly Established Company
- Maedler North America: 2020 (4 years ago)
- Shanghai Electrical Machinery Group Co Ltd: 2010 (14 years ago)
- FUDING BROTHERS POWER CO.,LTD: 2010 (14 years ago)
Company with a History
- Hitachi, Ltd.: 1910 (114 years ago)
- FIMET Motori & Riduttori SRL: 1910 (114 years ago)
- GEORGII KOBOLD GmbH & Co. KG: 1924 (100 years ago)
Three-Phase Motor Manufacturers in United States
*Including some distributors, etc.
- TECO-Westinghouse
- Siemens USA
- Columbus McKinnon Corporation
- ABB Motors and Mechanical Inc
- Hiwin Corporation
- Elinco International JPC, Inc.
- Maedler North America
- Optimal Engineering Systems, Inc.
- Wisconsin Oven Corporation
- Bearings & Industrial Supply Co., Inc.
- Pelonis Technologies, Inc.
- Nidec Motors
- ebm-papst
- Sinotech
Global Distribution of Three-Phase Motor Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
14 | 19.4% |
China
|
14 | 19.4% |
Italy
|
14 | 19.4% |
Germany
|
13 | 18.1% |
Austria
|
3 | 4.2% |
Switzerland
|
1 | 1.4% |
Canada
|
1 | 1.4% |
| Romania | 1 | 1.4% |
United Kingdom
|
1 | 1.4% |
Japan
|
1 | 1.4% |
Poland
|
1 | 1.4% |
Singapore
|
1 | 1.4% |
Vietnam
|
1 | 1.4% |
Spain
|
1 | 1.4% |
Republic of Korea
|
1 | 1.4% |
Czech Republic
|
1 | 1.4% |
France
|
1 | 1.4% |
Turkey
|
1 | 1.4% |
India
|
1 | 1.4% |
