10 Floor Hinge Manufacturers in 2024
This section provides an overview for floor hinges as well as their applications and principles. Also, please take a look at the list of 10 floor hinge manufacturers and their company rankings. Here are the top-ranked floor hinge companies as of November, 2024: 1.Guangzhou Gorgeous Intelligent Technology Co., Ltd, 2.Ryobi Limited, 3.China Chamber of Commerce for Import and Export of Machinery and Electronic Products.
Table of Contents
What Is a Floor Hinge?
A floor hinge is a device that can support the load of a swinging door embedded in the floor.
It is installed on the shaft side of the door and is used for heavy doors such as large glass doors at the entrances of commercial facilities and condominiums. There are several types, including those for general doors, tempered glass doors, and fire doors.
It is installed on the floor below the door, and although it is not often noticed, it is an important part of the door opening and closing.
Uses of Floor Hinges
Floor hinges are used to adjust the angle and speed at which doors open and close, and serve the same function as door closers. Floor hinges have a built-in hydraulic damper, and by adjusting the damper, the speed at which the door opens and closes can be adjusted. This ensures safe passage and eliminates slamming and loud closing.
The door can be selected to match the floor finish material and door size, and some are compatible with a variety of materials to attach stone, carpet, tile floors, and other floor finishes used in the surrounding area. There is also the ability to adjust the door opening angle, which can be set to 90°, 120°, 180°, etc., depending on the installation location and application. However, the installation of a door hinge is mandatory.
Floor hinges are durable and can be used for a long period, but there is no possibility of removing dust from the interior or corrosion causing failure. Frequent maintenance is necessary, such as checking for water accumulation. The manufacturer's recommended period of use is approximately 10 years.
Principle of Floor Hinges
The door is mounted on an axis on one side of the wall, and the open/close operation is performed from the opposite side of the axis, causing the door to open and close. The floor hinge body is attached to the axis of the door, and at the top of the floor hinge there is a component called the pivot, which is supported by the pivot and the top and bottom of the floor hinge, thereby mounting the door and controlling its movement and angle.
There are three major components of a floor hinge: the main body part, the cement case that is embedded in the floor side to house the main body, and the floor plate that covers the top part. In order to attach the main unit directly to the shaft of the door, the cement case that houses the main unit is embedded in the floor part.
If this cement case is unstable, the door will not open and close smoothly if it is not properly set up, so it is important to fix it firmly by mortar or welding. The arm portion of the main body to be placed on the main axis of the door is attached to the bottom axis of the door, and a metal plate is placed over the top to prevent the main body from being exposed.
Other Information on Floor Hinges
1. Precautions for Using Floor Hinges
The characteristics differ depending on the material of the floor surface. For stone, a plate called a floor plate is designed to fit neatly even when stone is applied, such as 20 mm or 30 mm, to create a sense of unity, while for carpeted floors, a thickness of 5 mm or 10 mm is secured.
By choosing floor hinges that match the finish, the metal floor plate can be hidden and will not spoil the atmosphere of the place. Conversely, it is important to note that this product is not compatible with thin materials, such as P-tiles and floor tiles. In such cases, the metal part of the floor plate will stand out.
2. Waterproof Floor Hinge
Some locations where floor hinges are installed are subject to water or moisture. Sealing material is used at various locations inside floor hinges to prevent water, moisture, and dust from entering. However, it is not completely waterproof, so overconfidence is not advised.
3. In Case of a Malfunction
Floor hinges are intended to be used for long periods of time, but because they are used frequently and support heavy loads, they can naturally fail. Failures are often caused by dampers, which prevent doors from closing fully, open and close too fast and too slowly, or prevent doors from closing.
If not repaired or replaced as soon as possible, the door or door frame will likely be affected, resulting in deformation or damage to the door or frame.
List of 10 Floor Hinge Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- China
- India
- Japan
- Malaysia
- Taiwan
-
-
-
Ryobi Limited
FLOOR HINGES
Manufacturer Overview
Ryobi Limited, established in 1943 and headquartered in Hiroshima, Japan, is a manufacturer components and equipment. Its diverse product range includes die-cast components for the automotive sector, builders' hardware for construction, printing equipment for the printing industry, electric power tools, and a range of outdoor solutions. The company plays a pivotal role in providing components for essential industries and offers an array of tools and equipment for various applications, making them a significant player in the manufacturing and tool industry.
-
-
-
-
-
D&D BUILDERS HARDWARE CO
Floor Spring
Manufacturer Overview
D&D Builders Hardware Co. is a manufacturer of door and window hardware equipment established in 2002 and based in Taichung, Taiwan. It specializes in manufacturing door hardware, such as door openers, exit devices, panic bars, door coordinators, and storm door handles. It also manufactures window hardware, including window handles, locks, operators, and oped-limited arms. Its manufactured products comply with RoHS standards and serve the construction, home improvement and renovation, manufacturing, and security sectors across Taiwan. The company is D-U-N-S certified and obtained EN ISO 12100:2010 certification. It has partnered with several companies, such as AluminArt, Emco, Suncast, Larson, and Dormakaba.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Alka Glass & Hardware
Floor Hinge
-
-
-
-
-
The Janson Enterprises
Klazovyn Double Floor Spring
-
-
Floor Hinge Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Guangzhou Gorgeous Intelligent Technology Co., Ltd |
29.9%
|
| 2 | Ryobi Limited |
15.6%
|
| 3 | D&D BUILDERS HARDWARE CO |
11.7%
|
| 4 | China Chamber of Commerce for Import and Export of Machinery and Electronic Products |
10.4%
|
| 5 | Alka Glass & Hardware |
9.1%
|
| 6 | Fortress Industrial Co., Ltd |
9.1%
|
| 7 | ARUNA TECHNO INDUSTRIES |
6.5%
|
| 8 | CKS GLASS HARDWARE SDN BHD |
5.2%
|
| 9 | Assia Metal Sdn Bhd |
1.3%
|
| 10 | The Janson Enterprises |
1.3%
|
Derivation Method
The ranking is calculated based on the click share within the floor hinge page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Ryobi Limited: 7,437
Newly Established Company
- Guangzhou Gorgeous Intelligent Technology Co., Ltd: 2008 (16 years ago)
- ARUNA TECHNO INDUSTRIES: 2002 (22 years ago)
- CKS GLASS HARDWARE SDN BHD: 2000 (24 years ago)
Company with a History
- Ryobi Limited: 1943 (81 years ago)
- Assia Metal Sdn Bhd: 1983 (41 years ago)
- China Chamber of Commerce for Import and Export of Machinery and Electronic Products: 1988 (36 years ago)
Global Distribution of Floor Hinge Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
Taiwan
|
2 | 25.0% |
China
|
2 | 25.0% |
Malaysia
|
2 | 25.0% |
Japan
|
1 | 12.5% |
India
|
1 | 12.5% |
