All Categories
This section provides an overview for butterfly valves as well as their applications and principles. Also, please take a look at the list of 171 butterfly valve manufacturers and their company rankings. Here are the top-ranked butterfly valve companies as of December, 2024: 1.Posi-flate Butterfly Valves, 2.Golden Harvest, Inc., 3.Hayward Flow Control.
Table of Contents
A Butterfly Valve is a valve with a disk-shaped valve disc that rotates to control the opening and closing of the valve.
Butterfly valves are called "Butterfly Valves" because the shape of the valve disc resembles a butterfly. The valve can be used in small to large bore sizes, and if the valve interior is lined with PFA or other material, it can be used with corrosive fluids.
Also, compared to ball valves, the flow rate can be adjusted, and the pressure drop is lower than that of globe valves. However, they are difficult to use with high-pressure fluids.
Because they are easy to operate and inexpensive, butterfly valves are used in a wide variety of locations.
Butterfly Valves are widely used in factory and plant piping, both manual and automatic. Butterfly Valves are not often seen in everyday life, but they are sometimes used upstream in water piping.
They are easy to operate, easy to open and close, and have a short face to face distance, so they can save space even in large bore sizes. For this reason, butterfly valves are often used in large bore locations upstream of transfer piping.
While general flow control valves have a large pressure drop even when fully open, Butterfly Valves have a small pressure drop and can adjust the flow rate to some extent. For this reason, butterfly valves are sometimes used as flow control valves.
Butterfly Valve consists of a stem, a seat, and a plug. The stem is connected to a handle or other device, which moves the connected valve plug. The Butterfly Valve has a disk-shaped plug, which opens and closes by turning it 90° to close the seat. Compared to ball valves, butterfly valves feature low opening and closing torque and adjustable flow rate even in large bore valves.
Butterfly Valves used to be recognized as valves with low airtightness and prone to leakage. In recent years, EPDM and PTFE have been used for the seat material of the valve plug to ensure airtightness.
To open and close the Butterfly Valve, an actuator must be attached to the end of the stem. A lever or gear is attached to the actuator.
A lever is used to open and close the Butterfly Valve. This is mainly employed for manual operation. The movement of the lever is synchronized with the movement of the shaft of the Butterfly Valve, and the valve is opened and closed by turning the lever 90 degrees.
It is simple to operate and the degree of opening can be easily visualized. However, the opening/closing operation becomes heavy for valves with large diameters. Because of the danger of unintentional contact with the lever that may change the degree of opening, the lever may be removed except during the open/close operation.
The opening and closing of Butterfly Valve is performed by gears. This type is mainly used for large-diameter valves. It may be motorized by a motor. In the gear type, a gear inside the actuator increases torque to move the stem. The large torque required for opening and closing is made possible with a small amount of force.
While the lever type requires only a 90-degree turn, the gear type requires multiple turns to open and close. Also, if left unattended for a long period of time, the gears may stick and fail to open or close.
In addition to the above, compressed air type actuators are also available and should be selected according to the application.
Butterfly Valves and other valves can be connected to piping by flange, wafer, threaded, or welded connections. Wafer type valves are also called flangeless type valves and are connected by flanges on both sides of the valve.
The wafer type does not require a flange, making it compact, lightweight, and economically advantageous. In addition, the short distance between the faces enables installation in narrow spaces. It must be sandwiched between flanges on both sides and stud bolts are used.
Stud bolts are bolts that are threaded on both sides and are fastened by tightening nuts from both sides of the bolt. However, in emergency situations, stud bolts may be substituted with inch-cut bolts.
*Including some distributors, etc.
Sort by Features
Sort by Area
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
Posi-flate Butterfly Valves, established in 1989 and based in Saint Paul, MN, USA, is a manufacturer and supplier of inflatable seated butterfly valves. The company's product range includes inflatable seated butterfly valves, actuators, limit switches, and controls. These products are used to ensure even pressure distribution for a tight seal in various systems. They primarily serve applications in dry solids, gases, and slurry handling. In addition to manufacturing, the company offers services related to the use and maintenance of its butterfly valves, switches, and controls.
OPW Engineered Systems, A Dover Company, established in 1892 and headquartered in Ohio, US, is a manufacturer of quick and dry disconnect fittings designed to meet any fluid handling need. The company offers grade top and bottom loading arms, swivel joints, sight flow indicators, quick and dry disconnect couplers, and safety breakaways. It also designs and manufactures touch-free and friction car wash systems. Its products can reduce tank turbulence, vapors, and generation of static electricity. Moreover, the company has achieved ISO-9000 certification. It serves industries such as chemical, transportation, retail fueling, and vehicle wash.
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
MDC Precision is a manufacturer of precision components since 1975 and is headquartered in Hayward, California with additional Pflugerville, TX, Sarasota Florida, Lyon, France, Milton Keynes, UK, and Vietnam. Its product portfolio includes viewports & glass components, electrical feedthroughs, vacuum flanges, roughing components, and vacuum valves such as hybrid adapters, elbows, watercooled clamps, flexible couplings, and crosses. They have fulfilled the ISO 9001:2015 certification and their products are used in life science & medical, semiconductor manufacturing, aerospace, food processing, and research sectors.
CRANE ChemPharma & Energy, a company based in Woodlands, Texas, is a manufacturer of process control instrumentation, valves, and analytical instruments for chemicals and refining products. The company is a part of Crane Co.’s Process Flow Technologies segment. It sells process valves, actuators, sensors, and pumps. Its products are designed to meet the needs of chemicals, industrial, mining, and other industries. It operates under a quality management system certified with ISO 9001.
Celeros Flow Technology is based in North Carolina, USA, and is a manufacturer of flow control technology products that was established in 2020 as a spin-off company from the SPX Flow Group. The company markets its products under several brands, including M&J Valve, GD Engineering, and ClydeUnion Pumps. Its product lineup includes filtration systems such as coalescers, valves such as butterfly valve models, and pumps such as reciprocating pump models. The company’s products are used by clients in the oil and gas, power generation, and chemical processing industries.
Swissfluid AG, established in 2002 and located in Lenzburg, Switzerland, is a manufacturer and global supplier specializing in lined valves and sampling systems for highly corrosive applications. The company’s products include butterfly valves, pneumatic actuators, sampling valves, cylindrical plug valves, and more. They also offer customized parts manufactured to customer specifications for pumps, piping systems, vessels, devices and valves. Their products find applications in industries such as chemical, pharmaceutical, and petrochemical sectors. With ISO 9001:2015 certification and compliance with the European Pressure Equipment Directive, Swissfluid AG servers clients worldwide, offering solutions that include training, maintenance, and repair services.
DeZurik was founded in 1928 in Minnesota, USA and it is a manufacturer of process industry valves. The company manufactures valves for water treatment, water distribution, pulp and paper, oil and gas downstream, petrochemical products, mining, power, and hydropower dams. Its products include plug valves, butterfly valves, control valves, knife gate valves, actuators, hydraulic power units, and many more. The company's technical resources include software programs and application solutions. The company is ISO 9001-2015 certified.
NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.
Kennedy Valve is an ISO certified American waterworks manufacturer founded in 1877 and located in Elmira, New York. They have produced hydrants for firefighting and fire prevention in association with the American Water Works Association since 1913 along with plethora double disc gate valves, rotating disc gate valves, solid wedge gate valves, and check valves among others utilized in water and wastewater industries. The company is among the 17 McWane family of companies operating throughout the United States and Canada.
Golden Harvest, Inc., established in 1983, based in Burlington, Washington, is a custom manufacturer of water control products. The company’s product portfolio includes aluminum and stainless steel gates, valves, handwheels, geared lifts, and wall thimbles. The types of gates manufactured include tapered and fully wedge sluice, roller, tide, slide, and shear gates, among others. These gates are suitable for flood control and drainage systems, power generating and industrial plant liquid waste handling facilities, pump & lift stations, fish hatcheries, and hazardous storage. The company serves customers in the United States.
Established in 1951, KITZ Corporation of America is a manufacturer that specializes in producing and supplying industrial valves and controls for various industries such as oil and gas, chemical, power generation, and water treatment based in Stafford, Texas. KITZ provides various types of valves such as ball, gate, globe, check, and butterfly valves along with control valves and actuators. Their products are designed to control the flow of liquids and gases. With branch offices and subsidiaries in the United States, Germany, Brazil, Japan, and many locations throughout Asia, Kitz is able to serve customers globally.
Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.
Assured Automation was founded in 1983 and is headquartered in Roselle, New Jersey. Assured Automation is an ISO 9001:2015 certified supplier of automation equipment serving manufacturing, chemical, and pharmaceutical industries among others. Assured Automation offers products in 2 major product lines: valves and flow meters. Valves include compact on/off valves, actuated 2-way and 3-way ball valves, actuated butterfly valves, actuated plug valves, actuated globe valves, manual gate valves, manual valves, lead free brass valves, thermal and remote shutoff valves, valve actuators, and valve & actuator accessories. Flow meters include water meters, fuel meters, industrial flow meters, lube-oil meters, and others.
MKS Instruments, founded in 1961 and based in Massachusetts, USA, is a manufacturer and distributor of instruments and process control solutions for advanced manufacturing processes. Its solutions are critical to addressing the challenges of miniaturization and complexity in advanced device manufacturing by enabling increased power, feature enhancement, and optimized connectivity. Its offerings include compact pressure transducers, mass flow meters, and microwave generators, used in advanced manufacturing and metrology applications. The company is certified to ISO 9001:2015, and has received an Innovators Award for its ESI CapStone system.
Milwaukee Valve, established in 1901 and headquartered in Brookfield, United States, is a manufacturer of industrial valves. The company offers a wide range of products, including gate valves, butterfly valves, and check valves, manufactured using materials such as stainless steel and brass. The company caters to diverse applications across various industries including oil and gas, and chemical. Milwaukee Valve is certified by API 609, AWWA C504, and BS 5159, and supplies customers globally, including France, the United States, Russia, the United Kingdom.
G-Metal Valves Corp., established in 2017, in California, United States of America, is a manufacturer and provider of industrial valves. The main products offered by the company include Wafer check valves, Butterfly valves, y-strainer Swing check valves, and Gate valves. These products are used in several applications, including chemical processing, pharmaceutical, and power generation, piping systems and fittings. It is certified by API 609, AWWA C504, and BS 5159. The company provides valves to customers like India, the United States, France, Mexico, and the United Kingdom.
Butterfly Valves & Controls, established in 1975 in the United States, is a manufacturer of butterfly valves and is headquartered at Rajkot, Gujarat. The main products of the company include Butterfly Valves, and Actuators. Its products are used in manufacturering of oil and gas, chemical, pharmaceutical, and water treatment industries. The company is certified by API 609, AWWA C504, and BS 5159. It is also a member of the American Petroleum Institute (API) and the Water Environment Federation (WEF). The company provides valves to countries like the United States, Canada, Mexico, and the United Kingdom.
RainMaker Pump Stations was founded in 2001 and is based in Lexington, South Carolina. The company is a manufacturer of custom-engineered products for commercial, governmental, and residential customers. The company has five product lines: Industrial/Municipal, Agricultural Irrigation, Landscape Irrigation, Pump Controls, and Accessories. Through these lines, the company produces individual pumps, complete pumping systems, individual starters and control boxes, and other necessary components and fittings. The company’s other services include custom fabrication, startup, installation, and repairs for systems and individual products.
Steel & O’Brien was founded in 1990 and operates out of Arcade, New York. Steel & O’Brien is a distributor of standard and custom-machined/fabricated fittings and assemblies. Steel & O’Brien serves the food, dairy, beverage, brewery, winery, distilling, biotechnology, pharmaceutical, cosmetic, personal care, extraction, semiconductor, and water treatment industries. Steel & O’Brien offers a range of products including various fittings, valves, actuators, diaphragm valves, pumps, accessories, sight glasses, strainers, filters, tubing, hangers, and others.
RWV was founded in 1971 as a joint venture between Mitsui & Company, Ltd. and Toyo Valve Company, Ltd. of Japan as Red White Valve Corp. In 2003, the company joined Valvoindustria Ing. Rizzio of Italy and today is headquartered in Lake Forest, California. The company is an ISO 9001:2015 and 14001:2015 certified manufacturer of valves for various industries, sold through stocking and non-stocking distributors. The company’s valve products by category include lead-free, hydronic, standard, and commercial & industrial valves. The company’s products by type include balancing, ball, butterfly plumbing, and radiator valves.
EnviroValve and Controls, Inc. has been an independent importer/distributor of ARI-Armaturen products since 1988. With a new name and additional valves and control products to offer, we now join our sister companies - EnviroPump and Seal and Dickow Pump - in their ongoing efforts to serve our customers with the best quality products at the best possible prices. If you need help controlling your processes and want to work with a team of engineers and experts who have decades of experience, please give us a call. We will do anything we can to help you out.
Metraflex Company was founded in 1958 and is based in Chicago, Illinois. Metraflex is a distributor of piping specialty products to the commercial HVAC industry among others. These are used in vibration isolation, noise dampening, protection against thermal expansion and contraction, pipe alignment, seismic movements, pump connections, and flow conditioning. Metraflex Product categories include metal expansion joints, rubber expansion joints, Metraloop, seismic breakaway hangers, energy saving pump connectors, flexible metal hoses, flexible couplings, valves, compensators, strainers, air vents, pipe guides, anchors, wall penetration seals, and fittings.
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
TVI Valves was originally founded in 1986 and is currently headquartered in Emmaus, Pennsylvania. The company is a distributor of valves and accessories to numerous industries ranging from amusement parks to health care to photography to water purification. The company’s four primary product lines are Plastic Valves, Metal Valves, Instrumentation, and Valve Accessories. Examples of valves include ball, butterfly diaphragm, and plug valves. Valve accessories include actuators, stem extensions, gears, fasteners, and other devices.
Stayflow is a USA manufacturing company of lighting for professionals, consumers, and lighting for the Internet of Things having products like professional, indoor luminaries, outdoor luminaries, and individual consumers. The product portfolio of the company includes LED lamps and tubes, 3D printed lighting, product highlights, Philips Hue, architectural linear, and many more. The basket strainers of the company protect equipment by mechanically removing solids from liquids and other commercial and industrial piping systems with the use of a perforated or wire mesh straining screen in a vertically oriented chamber.
Fox Valley Fire & Safety was founded in 1960 and is based in Elgin, Illinois. Fox Valley Fire & Safety provides service, inspection, repair, and installation of security and alarm systems. Many of Fox Valley employees hold NICET certification for fire, hazard, and water-based systems. Fox Valley works with businesses both large and small businesses to offer on-site surveys, CAD services, and testing of fire and other safety needs and meet government compliance standards. Examples of systems include basic fire alarms to 24-hour security monitoring, sprinkler systems, fire suppression systems, and emergency and exit lighting.
Valworx is a leading supplier of actuated valves and accessories. Valworx can provide you with Stainless, brass, PVC, sanitary ball and butterfly valves. Electric, pneumatic and manual actuation.
BI-TORQ Valve Automation was founded in 1981 and is now part of STRAHMAN Group. BI-TORQ is a distributor of plant optimization and safety products including valves and actuators used in oil & gas, food & beverage, manufacturing, pharmaceutical, and other industries. The company’s primary product lines include thermal shut-off valves, ball and butterfly valves, actuators, and knife gates. The company also sells accessories & repair kits including limit switches, NAMUR solenoids, and spring return handles.
Dawson-Macdonald Co., Inc. was founded in 1928 and is headquartered in Wilmington, Massachusetts. Dawson-Macdonald is a developer and producer of production manufacturing equipment, systems, and supplies for surface preparation.Dawson-Macdonald’s product offerings include air filtration equipment, abrasives, air blast equipment, shot blast equipment, wet blast equipment, wheel blast equipment, and vacuum systems. Dawson-Macdonald also offers rental options as well as preventative maintenance, service, and repair both in house or in the field.
Midwest Fasteners, Inc. established in Miamisburg, Ohio, is a supplier of shot blasting equipment, dust collection systems, parts washers, and pneumatic conveying systems. Their product portfolio includes Airless Centrifugal Blasting, Posi-flate, Washers, Blast Media, Nu-Soft Blast Media and Solvent Recyclers as well as posi-flate butterfly valves for optimizing the manufacturing process, and are used in industries such as construction, textiles, automotive and chemical industry. The company has customer service and a national distribution channel.
Reasontek Corporation was founded in 2009 and is headquartered in Brea, California. The company is a distributor of products that primarily serves the technology and domestic and global oilfield equipment and industrial supplies industries. The company has two primary business segments: accumulator production and oilfield equipment and industrial supplies. The accumulator production segment includes accumulators and other energy storage and surge protection devices as well as CAD services. The oilfield equipment and industrial supplies segment includes bladder accumulators, repair kits, and related accessories.
Automated Valve & Equipment Co. (AVE) was established in 1959 and operates out of Cleveland, Ohio. AVE is a distributor of valves and related products with the ability to provide custom specialty brackets, extension stems, and valve modifications. The valve automation segment features pneumatic control valves, electric control valves, modulating control valves, valve control devices, and remote valve operators. Industrial valves include ball, butterfly, & knife gate valves, gate, globe, & check valves, and control valves & regulators. Specialty valves and Pipe strainers are also available.
Bueno Technology Co., Ltd. is a manufacturer and supplier established in 1969, specializing in providing flow control products, and is headquartered in Tainan City, Taiwan. Their product range encompasses water and oil-free valves, fittings, and components for industries such as pharmaceutical, semiconductor, optoelectronic, electrochemical, and petrochemical. These products ensure the safety and stability of the manufacturing process. Bueno Technology Co., Ltd. has factories located in Taiwan, China, and Vietnam. The company has achieved several international standards, including ISO 9001-2000, ISO 14001, and AD200W, for its quality and environmental management systems.
Xiamen Landee Industries Co. Ltd., established in 1994, is an industrial components manufacturer based in Xiamen, China. It releases a new flow control model on a monthly basis and produces over 50 types of compononts, including pipes, valves, flanges, pipe fittings, and gaskets, in over 20 materials and 400 sizes. The company's products are used in the oil rig, gas, chemical, pharmacuetical, and paper-making industries, and it complies with API, CE, and ISO 9001:2008 certification requirements.
Gefa Processtechnik GmbH founded in Dortmund, Germany, in 1964, is a manufacturer of industrial valves and filtration products. Products offered by the company are valves, fittings, pipe bends, filters, and pumps. Its burst disks rupture at a specific pressure to prevent overpressure incidents. They safeguard equipment and personnel by releasing excess pressure in industrial applications. The company’s products are certified by ISO-14001 and FDA. It is reducing its CO2 footprint and aims to be CO2-neutral by 2030. It also provides custom products, inspection, and repair services to its customers.
OMAL S.p.A., established in 1981, is a manufacturer of quarter-turn pneumatic and electric actuators, along with ball, butterfly, and pneumatic valves, based in Rodengo Saiano, Brescia, Italy. The company's product line serves industries such as food, chemical, pharmaceutical, power as well as energy and naval sectors. With ISO 9001:2015 and AD2000 certifications, the company strategically invests in technical expertise and customization. It is a family-led business with over 100 employees across two locations in Italy.
Rubinetterie Bresciane Bonomi S.p.A., founded in 1901 and based in Gussago, Italy, is a manufacturer of brass ball and butterfly valves. It has expanded its portfolio to include pressure reducers, heating components, and press fittings, and it also accepts OEM requests. It has five divisions, including marine and plumbing, and various ISO certifications like ISO 9001, ISO 14001, and ISO 45001. In 1967, the company was the first to create the patented two-ball valves, and in 2006, it added fittings to its portfolio. It is part of the Bononi Group, and it acquired Fra.Bo in 2019, and Chibro in 2023.
SAFI is an ISO 9001-certified manufacturer specializing in corrosion-resistant plastic valves that was founded in 1963 and headquartered in Taulignan, France. The company specializes in producing industrial-grade, anti-corrosion thermoplastic and composite valves. Its products include butterfly valves that control or isolate the flow of liquids, ball valves for liquids or gasses, and diaphragm valves for sensitive or corrosive materials. It also offers related accessories such as actuators, sight glasses, and strainers. The company's products are mainly used in industrial processing facilities by clients in the petrochemical, water treatment, and power generation sectors.
Highlight Tech. Corporation, established in Tainan City, in 1977 is a manufacturer engaged in vacuum valves, gate vales and vacuum components for ultra-high vacuum environment process engineers. The company's product range includes LED, Touch flat panel display, semiconductor, optoelectronics technology and film vacuum coating. The company has service locations in Taiwan, China and worldwide representatives in Europe, Asia, The USA and Australia. In 2022 the company entered the Chinese market by selling the equipment of Thin-film Photovoltaic, developed by HTC.
Goetze KG, based in Fort Mill, USA, is a manufacturer of all kinds of valves and fittings. The company manufactures valves for all kinds of applications, including industrial, cryogenic and hygienic applications. The range of valves include safety valves, pressure relief valves and shut-off valves. These valves offer a pressure range from 50 to 1500 bar, and are used from -270°C to +400°C temperature. With custom-fit production, it provides solutions for individual requirements. The company complies with the ISO 9001 and 14001 standards of quality and environmental management.
ZETKAMA, established in 1946, is a manufacturer of Industrial Valves and Iron Castings based in Scinawkda Srednia, Poland. The company offers various types of valves including Stop Valves, Butterfly Valves, Strainers as well as Ball Valves, and Rubber Expansion Joints. ZETKAMA specializes in the production of Grey Cast Iron Castings and various types of Nodular Cast Irons. The company also has its own Iron Foundry and is able to adapt patterns, both in 2D and 3D, to customer specifications.
Wenzhou SanLo International Trade Co. Ltd., established in 2014 and headquartered in Wenzhou, China, is a manufacturer and distributor of mechanical and chemical valve solutions. The company specializes in machinery and auto parts, including mechanical seals and valves. It offers an extensive range of products, including IBC, ball, and PVC butterfly valves. It serves markets in Europe, South America, and Southeast Asia. The company provides a one-stop service encompassing design consultation, product development, and processing tailored to meet each customer's unique requirements.
Officine Meccaniche Industriali Srl (OMI) is based in Fogliano Redipuglia, Italy, and is a manufacturer of compressed air and industrial refrigeration products that was established in 1990 before its acquisition by Ingersoll Rand PLC in 2007. The company's portfolio comprises various products for compressed air treatment, liquid refrigeration, piping solutions, and related accessories. These include water or oil chillers, aftercoolers, butterfly valves, condensate separators, and refrigerator air dryers. The company's products are mainly used in the food and beverage, plastics, pharmaceuticals, and textile industries.
KTN, or Kara Technology News, founded in 2003 and based in Madrid, Spain, is a manufacturer of valves and instrumentation. Its product range includes various valve types like ball, butterfly, gate, globe, and control valves, each designed to meet diverse requirements for temperature and pressure resistance. It also offers a wide array of instrumentation devices for temperature and pressure measurement, along with automation products including limit switch boxes, and pneumatic actuators. The company complements its offerings with accessories like filters, compensators, sight glasses, and safety guards for a complete solution in the field of fluid control and measurement.
Prevost UK Ltd. , based in Annecy-le-Vieux, France, is a designer and manufacturer of compressed air and fluid distribution solutions. Its product range includes quick safety couplings, piping networks, filtration solutions, and pneumatic equipment. Notably, the company introduced the industry's first push-button coupling with a square button and launched the first composite "anti-hose whip" safety coupling, and the pure aluminum compressed air network called Prevost Piping System (PPS) in 2017. Its offerings are utilized for safety, efficiency, and the preservation of air and fluid quality.
Athena Engineering S.R.L., established in 1984 with headquarters in Italy, is a manufacturer of industrial valves, pumps, and filtration systems. The company has five product brands: Athena for valves and level gauges; GE-STAR for industrial pumps; ROSITATECH for process control instruments; ASAPHTECH for filtration systems; and Valentech for actuators. The company's valve equipment includes ball valves, butterfly valves, strainers, and control valves. The company's industrial equipment and solutions are used in power generation, oil and gas, water distribution, mining, and the chemical industries, as well as other fields. It also provides engineering services that include consulting, commissioning, automation, and maintenance.
Siemens began in 1847 and is headquartered in Munich, Germany. Siemens focuses in automation and digitalization technology and operates globally. Siemens’s 5 operating segments are digital industries, smart infrastructure, mobility, Siemens Healthineers, and Siemens Financial Services. Siemens Financial Services provides debt and equity investment as well as financing solutions. Siemens Healthineers is a medical devices company that provides products and consulting. Mobility includes passenger and freight transportation. Smart infrastructure includes full solutions for electrification. Digital industries offer both software and hardware for industries and production efficiency.
SCUTTI SRL, established in 1967 and headquartered in Abruzzi, Italy, is a manufacturer of cement silos and lime silos. The company's products and solutions include bulk storage silos, screw conveyors, and power flow valves. It offers individual products and complete project consultation for turnkey solutions, which it has contributed to large-scale projects including dams, railway lines, and power plants. It serves industries that include public works, maritime ports, and transportation systems. It has completed projects that include the UK Terminal, mining silos, and dockside mobile silos.
Elettromeccanica Delta S.p.A. is an Italian ISO 9001 certified manufacturer of safety and control products for combustion equipment founded in 1961 and based in Arcade, Treviso. The company's product portfolio includes burner control units for gas firing appliances, proportional flow control valves, solenoid actuators for control valves, air-to-gas ratio controllers, and gear pumps for oil burners. It also offers design and engineering services for customers with unique project parameters. The company's products are primarily used by client boiler and furnace installation companies, HVAC manufacturers, power generation facilities, and waste incineration plants.
Blucast, established in 2007 and headquartered in Vilnius, Lithuania, is a manufacturer that specializes in providing a range of ductile iron valves and fittings. The company offers a range of products that include ductile iron valves and fittings, as well as castable resins for the jewelry industry. It also offers other items such as copper vacuum insulated bottles. Its resin is shrinkage-free, ensuring dimensional stability over time. It serves two different industries, the jewelry industry and the water supply sector.
KSB SE & Co. KGaA is a Frankethal (Pfalz), Germany-based manufacturer and supplier of pumps, valves, valve actuators, and valve & pump automation equipment since 1871. Its valve product portfolio is composed of globe valves, control valves, diaphragm valves, swing check valves, and lift check valves with a diameter of 15-4000 millimeters and a nominal pressure of PN 6-500. They offer various types of pumps including ring-section, dry-installed, barrel pull-out, vertical shaft submersible, and submersible motor & borehole pumps. The company offers products used in various applications including chemical production, water technology, mining, building services, oil & gas technology, and water technology.
Tork, established in 1985 and located in Istanbul, Turkey, is a manufacturer of industrial control valves and process automation systems. The company's products include fluid control systems such as solenoid valves, pneumatic actuators, pneumatic piston valves, pulse valves, and electric actuators. It also offers services related to fluid control systems and process automation solutions. Its product has a high flow rate, short open-close time, and less pressure drop. The company has been certified with the ISO 9001:2015 Quality Management System. It serves various industrial sectors such as food, iron, steel, chemical, petrochemical, and more.
Ramén Valves AB, established in 1945 and based in Sweden, is a manufacturer of Ramen ball sector valves and industrial valves with production facilities in Stockholm and Fagersta. The company manufactures badge meters, pressure regulators, and control valves, supplying various industries such as chemicals, fertilizers, mining, minerals, and industrial gas. The company's valves, which feature circular to elliptical openings, are designed to mitigate dewatering and clogging issues. In 1978, the company expanded its product portfolio by incorporating industrial control valves and regulators sourced from various brands.
KÜHME Armaturen GmbH is a manufacturer of valves for high-risk applications that was founded in 1963 in Bochum, Germany. The company’s products include single-plate gate valves, automatic butterfly valves, and coal dust dampers. These control the flow of liquid and gas materials, prevent backflow, and control the amount of combustible dust particles in the air to prevent fires or explosions. The company maintains several internationally recognized certifications, including ISO 9001 and AD 2000 for operational standards and pressure vessel safety. Its products are used by biomass-to-waste energy plants, petrochemical facilities, and power distribution companies.
RICHTER, founded in 1957 and based in Kempen, North Rhine-Westphalia, Germany is a manufacturer of corrosion-resistant pumps and valves. The company's products are used in the base chemical industry, pharmaceuticals, semi-conductors and photovoltaics, transportation, food and beverage, and pulp and paper. Numerous accolades and certificates, together with inspections conducted by impartial organisations, highlight the company’s quality and dependability. The company is a unit of IDEX Corporation. It is specialised in producing centrifugal magnetic drive pumps, centrifugal mechanically sealed pumps, ball and butterfy valves, sight glasses, and aliding stem valves.
CMO Valves is an ISO 9001-certified manufacturer of standard and specialized valves for industrial applications that was established in 1982 in Gipuzkoa, Spain. The company produces a variety of valves for controlling slurries, gasses, and liquids. These include check valves, knife gates for solids or slurries, and penstocks for dams and reservoirs. It also offers hydromechanical equipment for cleaning and protecting water intake systems. The company mainly serves clients in the power generation, mining, and chemical industries.
BELGICAST, established in 1957 and headquartered in Mungia, Spain, is a manufacturer specializing in pipeline and fluid control components. Its diverse range of products includes gate valves for fluid control, check valves to prevent reverse flow, and butterfly valves for flow regulation. Additionally, the company offers universal couplings for connecting diverse pipes and flanged adaptors and saddles for pipe connections. The company's product quality are highly regarded in the industry.
Shanghai EVP Vacuum Technology Co. Ltd., is a manufacturer and supplier of vacuum solutions, headquartered in Shanghai, China. Its product offerings include liquid ring vacuum pumps, vacuum valves, and oil diffusion vacuum pumps. These products have diverse applications in industries such as coal mining, papermaking, sugar production, pharmaceuticals, and the chemical industry. Its manufacturing facility is well-equipped with CNC machining centers and testing and analysis equipment. All its products adhere to the DIN and ISO 9000:2008 standards and are CE certified. The company has supplied vacuum solutions to customers in over 80 countries and regions worldwide.
Dansk Ventil Center A/S, established in 1999 and headquartered in Vejle, Denmark, is a manufacturer that specializes in valves and accessories. The company offers a wide range of products and services related to valves and accessories, including ball valves, butterfly valves, safety valves, steam traps, and strainers. It also offers in-house engineering and assembly services. Its ball valves are cheaper than other types of valves, which makes them a cost-effective option for installation. It serves a wide range of industries such as oil and gas, pharmaceutical, waste water, FnB, and more.
DI NICOLA, established in 1928 and based in San Giovanni Teatino, Abruzzo, Italy, is a manufacturer of valves and electromechanical equipment. The company produces other products related to drinking water treatment plants, irrigation, wastewater treatment plants, dams, hydroelectric plants, and industrial installations. Some of the produced by DI NICOLA include flange adapters, disassembly joints, steel clapet valves, and vent valves. The company is supplying the products for industrial and hydraulic use. Every product produced meets the quality standards.
Zhejiang Gute Pneumatic Machinery Co., Ltd., founded in 1997 and based in Zhejiang province, China, is a manufacturer of pneumatic conveying system valves. The company also produces other products such as power station high-temperature and high-pressure valves, water treatment valves, ash conveying equipment, power plant desulfurization, and other environmental control equipment. Working with Zhejiang University, the company has developed anti-wear and toughened structural ceramic valves made using nanotechnology. All the products produced by the company are used in petroleum, electricity, metallurgy, and chemical engineering.
Beijing Valve General Factory Co., Ltd., established in 1952 and headquartered in Beijing, China, is a manufacturer that produces various types of valves. The company's product line includes ball valve, gate valve, globe valve, check valve, and butterfly valve. It also offers a cryogenic valve, a forged steel valve, a water system valve, and an actuated valve. Its product has a fire-safe and anti-static design. The company has achieved ISO9001, API6D, API6A, and API607 certification. It serves various industries, including petroleum, chemical, metallurgy, electricity, and infrastructure construction.
WENZHOU PIONEER VALVE, founded in 1993 and headquartered in China, is a manufacturer of wafer type ball valves. The company offers diverse products including flush tank bottom ball valves, direct mounting high platform ball valves, and thin-type flanged ball valves. Additionally, it offers services such as repair, maintenance, and a complete line of spare and replacement parts. These products are used across various industries, including heavy-duty ball valves, refrigerant central air conditioning units, and high-temperature jacket chemical applications.
VAG GmbH, founded in 1872 with headquarters in Germany, is a manufacturer of valves for infrastructure projects. The company's products include butterfly valves, house connection valves, gate valves, control valves with own-medium control for the regulation of pressure and flow rates in service areas, and electric check pump control valves. The company serves infrastructure projects such as water treatment and distribution, wastewater management, dams, and power stations. Services offered include commissioning, training, maintenance, on-site service, and the supply of original spare parts.
Belven, established in 1974 and based in Belgium, is a manufacturer of valves. The company provides solutions for the construction and industrial markets and is active in more than 50 countries. It is specialised in making ball valves, butterfly valves, check valves, expansion joints, and knife gate valves. With a particular chemical tank storage solution, the company has created industry-specific solutions like BV4-BLEED, BV4-RECOVERY, and BV4-CONTROL. The butterfly valves are often provided with white EPDM with an FDA certificate. The ISO-9001:2015-certified company also holds the EAC and GOST-R certificates.
FLAPCON, established in 2017 and headquartered in Istanbul, is a manufacturer specializing in a diverse range of industrial valves. Its product portfolio encompasses industrial valves, actuators, accesssories, connectors, instruments. These products cater to various industries, including oil and gas, chemical, mining, power generation, and water treatment. The company's products are crucial components in controlling fluid and gas flows across applications like pipelines, processing facilities, and industrial machinery, ensuring efficient and safe operations.
Bola-Tek Mfg. Co., Ltd., headquartered in Taichung, Taiwan, and founded in 1966, is a manufacturer of valve balls and stems. The company has expanded its product range to encompass several valve types, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its stainless steel and carbon steel products adhere to industry standards like ASTM, EN, JIS, and ANSI. It provides the API 607 fire-safe approved BT-V3WMH series, engineered for fire-safe performance. Additionally, it offers a 2-piece ball valve tailored for high-pressure applications, featuring a 6000psi rating.
InterApp AG is based in Rotkreuz, Switzerland, and is a manufacturer of industrial valves and actuators that was established in 1969 as a member of the AVK Group of companies. The company’s products include ball valves for high purity or corrosive media, butterfly valves for standard industrial applications, and check valves designed to prevent backflow. It also offers pneumatic and electric actuators for controlling valves. The company is certified to ISO 9001, ISO 45001, and ISO 50001 standards. It chiefly serves clients in the mining, power generation, and chemical industries.
Pietro Fiorentini S.p.a. founded in Arcugnano, Vicenza, Italy, in 1940, is a manufacturer of oil/gas processing and flow management products. The company manufactures products including pressure regulators, gas meters, gas odorizing systems, and valves. In 2022 it reached consolidated revenues of 500 million euros, an increase of 8% compared to 2021. The company has 2,800 employees spread across 40 international locations, with a strategic commercial presence in 100 countries worldwide. It also provides spare parts for its products and services of data management and custom engineering.
Herberholz GmbH, founded in 1948 and based in Ennepetal, North Rhine-Westphalia, Germany, is a developer and manufacturer of butterfly valves and dampers. The company offers a wide range of standard valves and control valves for industrial applications, such as combustion engines and component test benches, furnace burners, and automatic shut-off valves for boiler plant safety. It also provides mechanical and plant engineering services to develop individual solutions for on/off valves and control valves used in gaseous media applications.
Valvoindustria Ing. Rizzio S.p.A., established in 1971 and headquartered in Valsesia, Italy, is a manufacturer that manufactures valves for plumbing, HVAC, irrigation, and industrial applications. The company offers a wide range of products, including valves, gate valves, plumbing fixture fittings, and trim products. It also provides flexible joints, air vents, and polypropylene. Its valves allow for a quicker and easier installation than the more traditional methods of soldering and threading. The company has achieved ISO 9001:2008 for its quality system. It serves a wide range of industries such as plumbing, HVAC, and irrigation.
International Fluides Controles, established in 1986 and headquartered in France, is a manufacturer and distributor of industrial valve products, including valves, taps, and dampers. The company's products include wafer butterflies, knife gates, and check valves, offering customized designs and various actuators such as pneumatic, electric, and hydraulic. It provides solutions for fluid shut-off control in high-pressure and high-viscosity environments. Its products are used in water treatment, air and gas regulation, and power station industries. The company ensures product adaptability with different actuators and provides tightness tests, on-site diagnosis, and a substantial stock of products and spare parts services.
PFEIFFER Chemie-Armaturenbau GmbH, established in 1974 and headquartered in Kempen, Germany, is a manufacturer of industrial valves and control valve engineering products. The company offers a wide range of products such as globe valves, butterfly valves, ball valves, and more. It also offers rotary actuators, sampling systems, and pigging systems. Its products can take liquid samples from media flows without requiring a pipeline bypass. Furthermore, the company serves various industries, including healthcare, petrochemical, natural gas, and environmental industries.
Mival S.r.l., established in 1967 and based in Italy, is a manufacturer of industrial valves. The company is highly specialised in bellow valves. The company's products are built according to EN and ANSI regulations. It’s goods are used in sectors like steam and diathermic oil, chemical, pharmaceutical, petrochemical, and food boiler systems. Due to the company's concern for the environment, a 172-kW solar system has been built on the factory roof. The company specialised in making sediment collection strainers, gate valves, joints, butterfly and ball valves, and valves for drinking water. It holds ISO 9001:2008 certification.
HoKa Gesellschaft für Lüftungsformteile aus Kunststoffen mbH is a German manufacturer of plastic ventilation pipes and moldings that was established in Hennef, North Rhine-Westphalia in 1985. The company’s product lineup includes damper and butterfly valves, flanges, control dampers, double sockets, and t-pieces. It also offers rain and deflector hoods, supply and exhaust air grilles, and PVC spiral hoses. Virtually all items in its product portfolio are manufactured using the blow molding plastic forming process. The company chiefly serves clients in the food and beverage, HVAC, construction, and automotive industries.
Marck & Care Engineers Ltd., founded in 1999 and located in New Delhi, Delhi, India, is a manufacturer, exporter, and supplier of industrial valves, sight glasses, automotive strainers, and steam traps. The company’s product catalog includes thermodynamic steam traps, industrial valves and valve fittings, butterfly valves, ball valves, and industrial pipe and tube fittings. Others are knife gate valves, globe valves, lined valves, gate and sluice valves, and pipeline accessories. These valves are used in industries, such as pharmaceutical, petrochemical, oil and gas, food and beverage, and more.
Wenzhou Solid Mechanical Equipment Co., Ltd., established in 1989 and headquartered in Wenzhou, China, is a manufacturer of hydraulic pumps, oil pumps, and valves. The company offers a range of products, including high and medium-pressure vane pumps, gear pumps, piston pumps, lubricating oil pumps, and more. It also offers centrifugal pumps, diaphragm pumps, butterfly valves, and globe valves. Its lubricating oil pumps allow the pump to start operating without the need for additional oil when the machine is opened. Additionally, it has achieved ISO 90001 certification. The company exports its products to North America, South America, and Western Europe.
Velan, established in 1950, based in Ville St-Laurent, Québec, Canada, is a manufacturer of industrial steel valves, recognized as a standard-bearer in quality and innovation. The company manufactures valves that meet industrial needs in the areas of power generation, chemical and petrochemical, oil and gas, pulp and paper, and mining industries. Its product portfolio includes check valves, quarter-turn valves, specialty valves, and steam traps. All product valves are designed and manufactured carefully and incorporate many unique design features for environmentally friendly performance, simple maintenance, and quick service.
Winan Industrial Limited is a Chinese manufacturer of firefighting equipment established in 1995 and based in Shenzhen city, Guangdong. The company's products include automated fire monitors, foam bladder tanks, hoses, specialized valves, and foam inductors. It also offers complete fire suits and consumables, such as foam concentrate, automatic fire extinguisher balls, and conventional fire extinguishers. The company's products are chiefly used in Chinese petrochemical facilities, airports, marine ports, and power distribution locations.
Comap S.r.l. is an Italian ISO 9001 certified manufacturer of industrial bitumen processing systems and facilities established in 1996 and based in Fidenza, Parma. The company designs and produces industrial installations for storing, spraying, heating, and processing bitumen. Its products include emulsion tanks, thermal oil heaters, electric gravel strewers, sackers for cold asphalt, and standard spraying tanks. Aside from its products, the company also offers custom design services for metal frames and structures, cylindrical structures, and tanks for clients with unique project specifications.
Huasheng Pipeline Technology Co., Ltd, founded in 1988 and based in Jiangsu, China, is a manufacturer of pipelines offering comprehensive piping system solutions. The company specializes in the production of a diverse range of products, including pipes, fittings, flanges, and valves. With ISO 9001 and ISO 14001 certifications, it ensures the stability and sustainability of its products. The offerings provide benefits such as robust corrosion resistance, high-pressure capability, and leak-tight connections, making them suitable for industries like oil and gas, petrochemical, water treatment, and more, adapting to emerging trends in the piping industry, both domestically and internationally.
TPS-Technitube Röhrenwerke GmbH, established in 1973 and headquartered in Daun, Germany, is a manufacturer and stockist that specializes in steel and tube products. The company offers a wide range of products, including seamless tubes, flanges, fittings, valves, and heat exchanger tube stock. It also provides oilfield tubing such as tubing, casing, and drill pipe. Its products offer surface finish quality with no weld seam, ensuring high-pressure resistance and a smooth flow of fluids. The company has achieved ISO 9001:2015 and IATF 16949:2016 certification. It serves industries such as oil and gas, chemical, automotive, semiconductor, and more.
ARIS Stellantriebe GmbH, established in 1973 and headquartered in Troisdorf, Germany, is an industrial drives and valves designer, manufacturer, and supplier. The company's industrial drive products include electric actuators and special drive IECEX/ATEX actuator products for applications in Zone 1, 2, and 22 potentially explosive areas, as well as pneumatic actuators. Its range of industrial valves includes mixing valves, flange ball valves, and regulating valves. It also offers complete actuator and valve units that are customized for application requirements, as well as customized solutions for projects or as serial components.
Dynamic Corporation Limited (DCL) is a manufacturer of control system components founded in 2001 and headquartered in Wuhan, China. The company specializes in producing various explosion-proof, watertight, anti-condensation, and weatherproof industrial electric actuators and valves. These have a wide range of applications including in the pulp and paper processing, pharmaceutical manufacturing, shipbuilding, and HVAC industries. Aside from its products, the company also offers field or in-house testing, custom design, machining, and OEM/ODM services for customers in need of additional support.
KIESELMANN GmbH is a manufacturer of valves and pipes originally founded in 1937 as a small turning shop in Knittlingen, Germany. The company fabricates tubing, tank fittings, valves, and fluid processing accessories. These include square or rectangular stainless steel profiles, tank top units, aseptic sampling valves, sight glass, and dirt traps. The company also offers engineering services for client breweries and distilleries, food and beverage processors, and pharmaceutical manufacturers in need of custom solutions.
Handa Valve Co., Ltd. is a Chinese ISO 9001 certified manufacturer of valves and control equipment established in 2009 and headquartered in Changde, Hunan Province. The company produces a wide range of valves for fluid control or monitoring purposes, such as butterfly, floating ball, or knife gate valves. It also offers battery-operated, pneumatic, and manual models. Aside from its products, the company provides customized solutions for its clients in the power generation, petrochemical, metallurgy, and green energy sectors.
Armaturenwerk Hötensleben GmbH, established in 1992 and based in Völpke, Germany, is a manufacturer of stainless-steel components. The company produces products such as fittings, strainers, sight glasses, pipes &assembly accessories, and tank equipment and supplies to food, cosmetics, chemical, and pharmaceutical industries. The products of this company are manufactured using manufacturing technologies in the area of cleaning technology, valve technology, and pigging technology and abides by ISO 9001:2015 standards. The company has offices in the USA, Netherlands and Belgium.
Mix Srl unipersonale, founded in 1990 and based in Cavezzo, Italy, is a manufacturer of mixing equipment and industrial components for handling bulk solids. Its products include mixers, dust collectors, and granulators used for solids like powders, pastes, and granules. In 1991, the company was registered in the National Research Register, and later, in 2004, it established its first foreign branch in France. It opened the Indian branch in 2013, followed by the German branch in 2014. It is ISO 9001, ISO 14001, and ISO 45001 certified, and its mixers have obtained TÜV Italia certification.
Uflow Automation India, established in 2008, is an ISO 9001:2015 certified manufacturer and supplier of prime solenoid valves, and other control system valves based in Gujarat, India. The company offers various types of valves and automation solutions including Pneumatic Directional Control Valves used in aircraft and aerospace, Angle Seat Valves, Butterfly Valves as well as Pneumatic Actuators and Solenoid Valves used for various control automation applications in the chemical & pharmaceutical, oil & gas, power generation as well as food & beverages industries.
Franco Tosi Meccanica S.P.A., established in 1881 and headquartered in Legnano, Lombardia, Italy, is a steam and hydraulic power generation equipment designer and manufacturer. Its products include steam turbines, hydraulic turbines, and turbo-compression trains primarily used for industrial and municipal power supply facilities. The company also provides short-notice emergency and front-end services for all clients, including performance evaluations, repairs, and engineered upgrades. The company's projects include Italy's Torino Nord power plant, Greece's Thessaloniki power plant, and Ecuador's hydroelectric power plant.
Effebi Spa is an Italian ISO 9001:2015 and DVGW-certified manufacturer of brass valves that was established in Bovezzo, Brescia in 1973. The company produces butterfly valves for air or liquids, ball valves for gas or steam, and diaphragm valves for abrasive or corrosive fluids. It also offers valves utilizing pneumatic or electric actuators, specialized valves for solar systems or irrigation, and related accessories such as fittings. The company’s products are commonly used in the agricultural, petrochemical, and solar energy industries, as well as in heating, cooling, and plumbing systems.
ASAHI YUKIZAI CORPORATION, formerly known as Asahi Organic Chemicals Industry, is a Japanese manufacturer headquartered in Taito-ku, Tokyo, and specializes in resins and plastic valves since its establishment in 1945. The company manufactures valve and piping systems, including manual & automatic valves, pipes, fittings, and mixers. It also offers various foundry materials such as resin and sand products for casting, along with functional resins which cater to housing, construction, and industrial applications. The company engages in the design and construction of water utility facilities & reuse of wastewater, industrial water & wastewater treatment, environmental pollution prevention & purification, and public sewage management.
Sterling Tools, founded in 1988 with headquarters in India, is a manufacturer of material handling equipment and components. The company's products include valve handle levers, heavy-duty corrugated steel pallets, collapsible steel cages, four-wheel platform trolleys, and two-wheel platform trolleys. Sterling Tools also offers custom design, engineering, and production of its products to meet client-specific requirements. The company's services include the production of sheet metal parts and assemblies and metal turning, casting, forming, curling, and blanking.
Sentry Equipment Corp., established in 1925 and headquartered in Oconomowoc, Wisconsin, United States, is a sampling components and systems designer and manufacturer. The company's products include various easy-to-install sample coolers, heat exchangers, and ISOLOK samplers for high-viscosity applications, such as liquid and slurry. The company also offers process improvement consulting and a range of products that include coolant recycling, automation, and magnetic separators. The company provides services to production plants, including equipment maintenance, equipment rebuilds, and the supply of parts and consumable accessories.
ORBINOX was founded in Tolosa, Spain in 1964, and are manufacturers of industrial valves and are now working globally as manufacturers and suppliers of knife gate valves and related products, in 70 countries. The company designs, manufactures, and markets not just knife gate vales but dampers, penstocks, and valves for hydraulic works as well. these products are extensively used in the Pulp and Paper industry, for mining, water treatment along with reservoirs and Hydro solutions. The Food and Beverage, Power generation, and Petrochemical industry also benefits from these products. Special engineered valves, pinch valves, and pneumatic cylinders are also part of the production.
Sharp NEC Display Solutions of America, Inc., established in 2020 as a joint venture of Sharp and NEC Corporation with headquarters in the USA, is a manufacturer of display products and electronic components. The company's display product line includes commercial TVs, large board TVs, projectors, and accessories, including HDMI cables and USB docks. The company also provides custom solutions, including high-resolution video walls, ActiveScene transparent glass display walls, and managed services that include installation, calibration, and ongoing maintenance. It serves many industries, including the medical, consumer electronics, home appliance, industrial, and automotive markets, among many others.
Tyco Fire Protection Products, based in Landsdale, Pennsylvania, serves as a manufacturer and supplier of diverse fire suppression systems for various applications spanning commercial, industrial, and residential sectors. Its product line encompasses extinguishing agents, sprinkler systems, and valves. The company also offers piping products, firefighting equipment, and services. Its water-based fire products range from automatic sprinklers, system valves, to electrical devices. Its global technology portfolio comprises several brands, including TYCO, ANSUL, and GRINNELL.
Ravizza Packaging SRL, founded in 1938 and headquartered in Alpignano, Italy, is a manufacturer of industrial flexible packaging machines, packaging materials, and related equipment. The company's products include bag forming and filling machines, compact bag forming machines, and semi-automatic dosing machines for filling its flexible packaging products and other container types with beverages and other liquid consumer products. It also offers a range of axillary equipment, including package printers, multi-compartment stepping conveyors, and politainer packaging adapters. The company entered the US market when it established Ravizza Packaging USA Corp. in 2015.
Garlock, headquartered in Palmyra, New York, is a global manufacturer of sealing solutions for diverse industries worldwide. Offering over 100,000 sealing solutions, its products cater to demanding fluid-handling equipment in sectors such as chemical processing, food & beverage, brewing & bottling, and mining. Its product range includes GYLON for superior leak prevention, BLUE-GARD enhancing torque retention and emission reduction, MIll-RIGHT for abrasion resistance and extended seal life, and MULTI-SWELL for tight seals in water and oil applications.
GESTRA AG is headquartered in Bremen, Germany, since 1902 as a designer and manufacturer of valve and control systems. The company deals in boiler controls, steam traps, isolation, and control valves. It also offers check valves, strainers, and service control valves. The products have multiple applications in general manufacturing, chemical, power generation, boiler manufacturing, and oil & gas industries. The products are also essential in maximizing system efficiency and minimizing water consumption in the pulp and paper market. Its services include system auditing, project engineering, steam trap surveys, and automatic broiler control.
Famat, established in 1974 and headquartered in Fribourg, Switzerland, is a manufacturer that specializes in valve technology and supplies valve packages. The company offers a wide range of products, including expanding piston technology valves, butterfly valves, gate valves, and check valves. It also offers air and vacuum valves, automatic control valves, control valves with actuators, and ball valves. Its products are based on its patented EPT system, which eliminates the need for O-rings and leaves no dead space. It serves various industries such as water works, power generation, petro-chemical, oil, and pharmaceutical.
ARI-Armaturen Albert Richter GmbH & Co. KG, established in 1950 and headquartered in Schloß Holte-Stukenbrock, Germany, is a manufacturer of industrial valves and makes all its products in Germany. The company is ISO 9001, ISO 14001, and ISO 50001 certified and sells 20,000 products in over 200,000 variants. It has 18 sales subsidiaries and a network of partners in over 50 countries. In 1958, it expanded its product range to 300 items and entered the shipbuilding industry. In 1970, it introduced STEVI control and FABA stop valves, and in 1980, it introduced SAFE safety valves.
Dorukendustri, founded in 2001 and based in Istanbul, Turkey, is a manufacturer of industrial valves and actuators. The company produces registered PROVAL brand products that are accepted and used in more than 90 countries worldwide. Modern CNC machining centres are used in the production and processing of the goods. Using an ERP business resource planning architecture and an ISO 9001:2015 quality assurance system, the plant occupies 10,000 square metres. For traceability, every product has a distinct QR code. The products manufactured by the company are used in the chemical, mining, iron and steel, cement, and marine industries.
END-Armaturen GmbH & Co. KG is a German manufacturer of industrial valves that was established in 1980 in Bad Oeynhausen, North Rhine-Westphalia. The company primarily produces butterfly, knife-gate, ball, and solenoid valves. It also offers actuators, pressure reducers, strainers, flanges, and fittings, among other related accessories. These are commonly used in the biotech, water treatment, chemical processing, and oil and gas industries. Aside from its products, the company provides custom design and engineering services for unique customer projects.
AMOT, established in 1948 and based in Houston, Texas, United States, is a manufacturer of energy control valves, safety, and monitoring products. The company manufactures products such as temperature control valves, air and gas control valves, diesel engine safety products, and control products for engines, compressors, turbines, and rotating equipment. These products serve various industries, including oil & gas, marine, power generation, and rail/transportation. The company's manufacturing units hold two certifications: ISO 9001 Quality Management System Certification and ISO 14001 Environmental Management System Certification.
Fluidra S.A., founded in 1969 and based in Spain, is a manufacturer of valves and fittings using thermoplastic materials. The company also distributes its products to irrigation, swimming pools, and industrial markets. With centers in 46 countries and 136 sales branches, the company offers various other products, such as PVC pressure fittings, PP compression fittings, check valves, ball valves, and irrigation fittings. All its products are made by abiding by the ISO 9001 quality standards.
Asa Technology Produktions und Vertriebs GmbH is based in Vienna, Austria, and is a manufacturer of compact hydraulic products and coolers that was established in 1980 as a subsidiary of Asa Hydraulik GmbH. The company primarily produces a range of thermal systems for cooling liquid, gasses, or electronics. These systems include finned tube, plate and bar, and brazed plate heat exchangers. It also offers pumps for hydraulic systems, metal and rubber hoses, and connection adapters. The company’s products are commonly used in the power generation, renewable energy, and mining industries.
Alfa Laval Corporate AB was founded in 1883 and headquartered in Lund, Sweden. Alfa Laval serves energy, utilities, home, personal care, food, dairy, beverage, marine, transportation, pharmaceutical, biotech, water, and wastewater industries. Alfa Laval provides heat transfer, separation, and fluid handling products and solutions worldwide. Alfa Laval operates in three divisions: Energy, Food & Water, and Marine. Alfa Laval offers oil & gas-fired steam and composite steam boilers, exhaust gas economizer, and ballast water treatment systems, and exhaust gas cleaning products. Alfa Laval also provides sensing and control, cleaning validation, condition monitoring, agitators, tank, powder mixers, fittings, and tubes, as well as wall mounted cleaning nozzles, rotary jet and heads; and tank accessories and covers.
Aalberts, established in 1975 and headquartered in Charlotte, North Carolina, is a manufacturer and supplier specializing in integrated piping systems for the distribution and control of liquids and gases. The company’s product portfolio includes ball valves, butterfly valves, safety relief valves, fasteners, and more, catering to residential, commercial, industrial, and utility sectors worldwide. The company also offers vertically integrated designs, white label manufacturing of valves, fittings, and other piping system components for diverse projects. The company’s has a team of plumbing and mechanical system experts that provide technical support services to customers.
Brandoni Valves, established in 1961, and based in Piedmont, Italy, is a manufacturer of industrial valves. Its diverse product line encompasses shut-off valves, check valves, joints, solenoid valves, and actuators. These quality products find application across diverse industries like water treatment, power generation, oil and gas, and chemical processing. The company's precision-crafted products are tailored to control and regulate fluid and gas flow, ensuring efficiency and quality in critical processes.
STÜBBE, established in 1925 and headquartered in Vlotho, Germany, is a manufacturer of pumps, valves, and instrumentation systems made of thermoplastics. The company's range of products includes pumps, valves, instrumentation systems, and ball valves. It also provides round-the-clock service and spare parts delivery for customers. The company's products are chemical resistant and can withstand exposure to various chemicals and chemical mixtures. The products find ideal applications in various industries, including environmental technology, surface technology, chemical industry, metallurgy, and mining.
KITZ SCT Corporation, established in 1951 and based in Japan, is a manufacturer of fluid control devices and equipment. The company produces products such as ultra-high purity gas valves, vacuum exhaust valves, fittings, and thermoplastic valves and supplies to semiconductor manufacturing processes. With 12 companies in Asia, America, and Europe, the company manufactures products used in different phases of semiconductor and FPD manufacturing. All its products are designed according to the ISO 9001 quality standards.
JAUDT Dosiertechnik Maschinenfabrik GmbH, established in 1951 and headquartered in Germany, is a manufacturer of bulk material handling equipment. The company specializes in the mechanical engineering sector, offering an extensive range of products, including butterfly valves, double shuttle valves, and silo blasters. These products are essential for many industries, such as construction, environmental technology, and the chemical sector. The company also offers customizable filter feeders and valve options and produces ATEX and ExZü equipment, ensuring safety in potentially explosive environments.
DOROT, established in 1940 and based in Barcelona, Catalonia, Spain, is a manufacturer of hydraulic control valves and air valves. The company also produces products such as mechanical valves, metal pilot-operated valves, back-flushing valves, and plastic pilot-operated valves. It has merged with ARI and OCV control valves and formed the company by the name Aquestia. The company products are used in different areas, such as fire protection, water treatment and filtration, agricultural and landscape irrigation, and water metering. All its water and fluid system applications comply with international quality standards and specifications.
Honeywell, founded in 1906, in Wabash, Indiana is manufacturer of automotive parts, building technologies, and performance and safety materials for aerospace, The company's product portfolio includes electronic guidance systems, cockpit instrumentation, lighting, automotive parts, and primary propulsion and secondary power turbine engines. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. Their headquartere is located in Carolina and they have global sales offices and distributions channels.
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
Avcon Controls Pvt. Ltd., established in 1969 and based in India, is a manufacturer of solenoid valves, ball valves, and butterfly valves with pneumatic and electric actuators. The company also produces gas control and regulation products and valves for the pharma and biotech industries. The company's products have received approval from consultants as well as users, OEMs, and other parties. It holds ISO 9001 certification and the products are used in the textile and cement industries, the pharma, biotech, food, and petrochemical industries, and also in the bakery.
TECOFI, founded in 1985 and based in Corbas, France, is a manufacturer of industrial valves and fittings. Its product range includes butterfly valves for fluid control, knife gate valves for handling thick fluids, resilient seat gate valves used in flow regulation, ball valves for precise control applications, and check valves to prevent backflow. Its products are used in industries such as water and wastewater treatment, power generation, oil and gas, and chemicals. The company is known for its expertise in valve design and production.
Watts was established in 1874 and is a manufacturer of water management products based in North Andover, Massachusetts, United States. The company offers various water solutions products such as automatic control valves, gas connection systems, pressure reducting valves, water quality parts, and high purity process piping systems. The products have been used for serving various industries such as healthcare, agriculture, hospitality, commercial, and municipal waterworks. The products have been created under compliance of CSA, NSF International, WQA, BSI, and AGA manufacturing standards.
Tuning (France) is headquartered in Marseille, France, and is a manufacturer of industrial valves for fluid and gas control that was originally established in 1996 before being acquired by JWB Holding in 2017. The company's products include electric knife gate valves, manual 2-3 ball valves, electric actuators, double-acting or spring return valves, and pneumatic actuators. These products are mainly used in the food and beverage, chemical, petrochemical, pharmaceutical, and marine sectors. Aside from its products, the company also offers services such as technical support, maintenance and repair, and product customization.
ECONEX S.R.L. is a manufacturer of industrial combustion components as well as HVAC actuators that was established in 1997 and is based in Milan, Italy. The company's products include flame and tightness control devices, pressure regulators, solenoid valves, electric actuators, and flexible metal hoses. It also offers complete as well as assembled industrial gas trains. The company's products are mainly used by clients in the ceramic, heating, glass, food production, and metal industries.
Founded in 1890 and is currently holding the ISO/IEC 17025:2005 certification, Pfeiffer Vacuum, Inc. is a supplier and manufacturer of standard and custom leak, flow testing instruments and devices. Their extensive product line includes flow calibration equipment, non-destructive leak testing software, pressure or vacuum-based instruments, and test stations and stands. Pfeiffer Vacuum Inc. offers all types of vacuum applications and serves various industries, including automotive, aerospace, electronics, military, pharmaceutical, medical, oil and gas, and HVAC.
Grupo de Incendios, headquartered in Soria, Spain, is a manufacturer that designs, develops, sells, and produces fire protection and prevention equipment. The company offers a wide range of products, including fire extinguishers, fire hoses, fire cabinets, and fire hydrants. It also offers sprinklers, fittings, nozzles, hoses, and valve control. Its products can provide access to water and other fire suppression materials, helping to prevent the spread of fire to other areas. The company has achieved CE and A21/000063 certifications. It serves industries such as commercial, industrial, and residential buildings.
Düker GmbH, established in 1951 and headquartered in Karlstadt, Germany, is a manufacturer that specializes in providing sustainable solutions for flow control and drainage. The company offers a wide range of products, including cast iron pipe systems, couplings, fire protection, gate valves, and more. It also provides hydrants, pressure fittings, wastewater, and plunger valves. Its products are designed to improve the quality of life in buildings. The company has received ISO 9001:2015 and LEED certifications. It serves a range of industries, including chemical, construction, pharmaceutical, waste disposal, and more.
UZTPA LLC, established in 2009 and headquartered in Moscow, Russia, is a manufacturer that produces valves for industrial, fuel, and energy complexes. The company offers a wide range of products, including Aquarius-Balance control valve, Ugresha plate and frame heat exchangers, and Ugresha butterfly valves. It also provides flanged rubberized gate valve Ugresha, DN810, PN10, and ball valve. Its control ball valve allows leaving the ball in an intermediate position without damaging the shut-off element. The company has achieved GOST ISO 9001 and STO Gazprom 9001 certification. It serves various industries, including industrial, housing and utilities, fuel, and energy.
Albert Handtmann Armaturenfabrik GmbH & Co. KG is a German manufacturer of process technology products and systems that was established in Biberach, Baden-Wurttemberg in 1873. The company primarily produces safety valves for protecting tanks and pipes from vacuum or overpressure, armatures for controlling fluid flow, and tank dome caps for sealing vessels or tanks. It also offers process systems for small- to medium-scale beer brewing processes, such as degermination and filtration. The company is a subsidiary of the Handtmann Group of companies, primarily serving clients in the dairy, food, chemical, and beverage industries.
Erhard GmbH & Co. KG, established in 1871 and located in Baden-Württemberg, Germany, is a manufacturer that specializes in water flow control solutions. The company offers a range of products and services, including needle valves, inspection, and penstocks. It also provides butterfly valves, check valves, gate valves, and diaphragm valves. Its products control the opening and closing process of a fluid automatically, so the users don’t have to worry about closing or opening the valves manually. The company has achieved ISO 9001:2015 certification for its quality management systems. Furthermore, it serves the water supply industry.
Scheuch Components GmbH, established in 1963 and headquartered in Aurolzmünster, Austria, is a manufacturer and supplier of industrial equipment. The company's solutions include radial fans used for industrial ventilation systems, customized soundproofing solutions for industrial halls, and modular Odor Emission Control OEC filters. These products are used primarily in industrial plants to control emissions and maintain air quality. Its services include complete system commissioning, assembly, and installation, and it offers ongoing maintenance and inspection service contracts with spare part supplies available.
Nencini Srl, established in 1967 and based in Italy, is a manufacturer of hydraulic valves. The company produces discharge valves for potable and irrigation water pipelines and air valves for hydraulic power plants. In 2022, the company becomes a member of the OMB Valves Group. The company's quality system complies with EN ISO 9001:2015, an international standard. The company specialised in air valves, needle valves, fixed cone valves, and butterfly valves. Every valve undergoes final workshop hydrostatic tests as per international standards.
Stanelle Silos + Automation GmbH, established in 1965 and headquartered in Güglingen-Frauenzimmern, Germany, is a designer and manufacturer of silo technology and silo automation. The company's products include silo filling, discharging, and controlling equipment. It also supplies vertical screw conveyors for horizontal and rising conveying of dry, powdery, and granular bulk materials and a range of shut-off valves. The company also offers customized material flow systems, including silo systems made of sheet steel for the storage of cement and other dry bulk materials with a maximum bulk density of 1400 kg/m3.
Pelican Worldwide, founded in 1986 and headquartered in Rotterdam, Netherlands, is a manufacturer and supplier specializing in tank parts, gaskets, and seals. The company’s product portfolio includes gaskets, seals, manlids, valves, and other tank parts. Their products are designed to enhance the efficiency of tank containers and trailers, catering to the needs of companies in transportation, logistics, and storage of liquids and bulk materials. Pelican holds ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certifications. The company serves customers worldwide with manufacturing sites in China and the USA, along with sales offices in Dubai, Istanbul, Rotterdam, and Singapore.
Bray International, Inc., incorporated in 1986 and headquartered in Houston, Texas, USA, is a global manufacturer of flow control and automation products and accessories Its product line includes butterfly valves, ball valves, knife gate valves, control valves, and check valves. It also offers actuators, cryogenic products, and control accessories, including solenoids, sensors, and switch boxes. The company's performance-tested products meet various global certifications and approvals, including Lloyd's Register, UL, ABS, and more.
Wenzhou Ace Machinery Co., Ltd., established in 2016 and headquartered in Wenzhou, China, operates as a manufacturer and supplier of industrial economic entities such as machinery, equipment, and fittings. The company's product portfolio includes brewing equipment, dairy production machinery, cosmetics production equipment, food machinery, and pump & valve accessories. These products cater to various sectors, including the food industry, cosmetics, manufacturing, and medical sectors. The company provides its products to more than 30 countries, including the USA, Canada, Sweden, Korea, Australia, and more.
Samson is a manufacturer and distributor of control equipment for industrial processes that was founded in 1907 in Frankfurt am Main, Hesse, Germany. The company specializes in products for controlling the flow of industrial liquids, including modular controllers for automation systems, solenoid valves, and pressure sensors. It also offers digital solutions for process optimization and data analysis operations. The company chiefly serves clients in the food and beverage, power generation, and petrochemical industries.
Hebei Shinning Metals Co. Ltd. is a manufacturer and supplier of metal products established in 2006 and based in Shijiazhuang, Hebei, China. The company offers grills for cooking applications or HVAC parts, plumbing supplies including fixtures and pipes, and screws in a range of sizes and grades. It also offers hinges for doors and furniture building, and cast iron fabrication services for machinery or construction parts. The company is ISO 9001-certified, and serves clients in the retail, HVAC, and furniture industries.
KLINGER was established in 1886 in Gumpoldskirchen, Lower Austria, as a manufacturer and supplier of industrial sealings, fluid control systems, and fluid monitoring systems. The company's product list comprises KLINGER CNAF gaskets, KLINGER ball valves (INTEC Range), and Reflex level gauges, among others. The products provide sealing solutions for critical applications requiring chemical resistance and temperature management, precise flow control and shut-off functionality in industrial processes, and essential liquid level monitoring for safe operations. The company serves various industries, including general manufacturing, automotive, infrastructure, marine, and food and beverage.
Rolland Arroseurs / Sprinklers is French manufacturer and distributor of plastic as well as brass fire sprinklers and irrigation systems that was established in Saint-Priest-en-Jarez in 1969. The company’s product lineup includes irrigation, irrigation, and under-foliage sprinklers, as well as fire sprinklers, rain guns, and stakes-bases. It also offers sprinkler accessories such as regulators, filters, and nozzles. The company is certified to ISO 9001:2000 standards, and markets its products through its own distribution network across North America.
Effast, a division of Genuit, established in 1984 and based in Genova, Italy, is a manufacturer and distributor of valves and fittings for industrial applications. Its product range encompasses various materials and fittings like ABS, PE, PP-H, and PVC, as well as ball valves, and actuation adaptor fittings. These products serve industries including water treatment and irrigation. The company has earned certifications such as ISO 9001:2015 for Quality Management, ISO 14001:2015 for Environmental Management, and ISO 45001:2015 for Occupational Health and Safety Management, showcasing its adherence to quality and sustainability in its operations.
STERIVALVES, established in 1999, and headquartered in Lucca, Italy, is a manufacturer of valves for the pharmaceutical, chemical, and food industries. It offers various products including butterfly valves, valves designed for feeding and volumetric dosing of bulk solid products, and valves designed for the pharmaceutical and food industries. The company has received several certifications including ATEX 2014/34/EU for explosion risk control for appliances and systems intended for use in potentially explosive atmospheres, U.S. Food and Drugs Administration Certification (FDA) for compliance for use in the pharmaceutical and food sector, and Inspection Certificate 3.1 as per EN10204 for compliance of materials.
AFC TECH, established in 1999 and based in Hefei, China, is a manufacturer and supplier of industrial valves. The company specializes in designing and manufacturing industrial valves and fittings, including ball valve, knife gate valve, and plug valve. It also supplies special material valves such as hastelloy and monel, as well as general materials like WCB and LCB. Its products are widely used in the oil & gas, petrochemical, and mining industries. The company sells more than 80% of its products to European, South American, and African countries.
Wouter Witzel EuroValve B.V., established in 1966 and headquartered in Overijssel, The Netherlands, is a manufacturer and supplier of industrial butterfly valves and actuators. The company offers a full range of manual control devices, actuators and accessories available for specific conditions. Some of its products are vulcanized bonded concentric butterfly valves, double offset butterfly valves, and dual-plate check. These products are used in pipelines as shut-off valves, control valves, and non-return valves. Its products meet various certifications and approvals, including BSI, Atex, and TNO.
LUXI GROUP CO., LTD., based in Liaocheng, Shandong, China, is a manufacturer and distributor of chemicals, chemical materials, and fertilizers. Its product range encompasses coal chemicals like methanol and melamine, salt chemicals such as caustic soda and benzyl chloride, and fluorosilicone chemicals like Teflon. The company has garnered numerous awards, including the "China Labor Award," for technological products, and contributions to the chemical industry, making them a player in China's chemical manufacturing landscape.
VELO ACCIAI S.R.L. is based in Ezzelini, Treviso, Italy, and is an OHSAS 18001-certified manufacturer of industrial fittings that was established in 1980 as a sister company to VLS Technologies. The company offers stainless steel fittings for regulating or connecting fluid movement networks, as well as catwalks and stairs for height access or positioning. It also offers related stainless steel components for customizing or optimizing fluid network installations. The company’s products are used mainly by clients in the chemical processing, recreational beverages, and petrol industries.
KOSA Corp, operates as a manufacturer and supplier of industrial control valves, headquartered in Qingpu District, Shanghai, China. The company specializes in the production, research and development, sales, and services of industrial control valves. Its product offerings include a pneumatic diaphragm control valve, electric regulator valve, electronic control valve, self-operated regulating valve, and ultra-small flow regulating valve. These products are generally used for controlling the flow of liquids or gases. It has received the API6D certification from the American Petroleum Institute for its adherence to quality and safety in the production of its products.
Shie Yu Machine Parts Ind. Co., Ltd. is a Taiwanese manufacturer and supplier of thermoplastic fluid transfer products that was established in 1973. The company’s product portfolio includes nature ball, compact ball, labcock ball, diaphragm, and butterfly valves. These are available in PVC, PP, CPVC, PPG, PVDF and HDPE with matching fittings. It also offers quick repair couplings, gaskets, gauge valves, and flanges. The company’s products are commonly used in chemical processing, oil refining, water treatment, and irrigation operations, as well as by clients in the mining and textiles industries.
Sure Flow Equipment, Inc. is headquartered in Burlington, Ontario. Sure Flow Equipment is an ISO 9001:2015 certified manufacturer and distributor of industrial valves, strainers, and other fluid control machines used across industries. Sure Flow Equipment’s product lines include various strainers including duplex strainers, valves butterfly valves, bleed rings, joints, and other parts. Sure Flow Equipment provides resources such as videos, technical information, and usage guides to assist customers in installation and operation.
Flowserve Corporation, founded in 1790 and headquartered in Irving, Texas, is a manufacturer and supplier specializing in fluid motion and control products. The company's product portfolio includes pumps, seals, valves, energy recovery systems, and decoking systems. These products are utilized across various industries, including power generation, chemical processing, water management, oil and gas, and various general industries. The company also provides customer services, including on-site field services, solutions engineering, system assessments, repairs and maintenance, and training and development.
VAT Group AG, established in 1965 and based in Sennwald, Switzerland, is a manufacturer and supplier of high-performance vacuum valves and related components. The company's product portfolio includes vacuum gate valves, vacuum angle/cylinder valves, vacuum all-metal valves, vacuum pendulum valves, and vacuum butterfly valves. These products are instrumental in applications like semiconductor production, solar panels, and display production. The industries it serves are semiconductor manufacturing, solar energy, display technology, and research sectors. In addition to manufacturing it offers services such as custom engineering, retrofitting, refurbishment, and customer support.
Vatac Valves Wenzhou Corp, established in 1987 and headquartered in Wenzhou, Zhejiang, China, is a global manufacturer and supplier of industrial valve solutions. It offers an extensive line of materials, from conventional steel to special alloys such as Monel, Inconel, Hastelloy, and Duplex steel. Its product portfolio comprises ball valves, gate valves, globe valves, butterfly valves, and through conduit gate valves, adhering strictly to international standards like API, ASTM, ANSI, and ISO. The company holds CE certification and ISO 9001:2000 quality management system accreditation and operates within vast manufacturing facilities spanning over 500,000 square feet.
Somas Instrument AB is a Swedish manufacturer and distributor of shut-off as well as control valves that was established in Säffle in 1947. The company mainly produces its items from acid-proof and stainless steel. These include ball, ball segment, and butterfly valves, as well as hydraulic, pneumatic, and electric actuators for providing motion or force to operate the valves. It also offers installation, repair, and maintenance service packages for customers requiring additional support. The company products are primarily used by its clients in the chemical, power generation, pulp and paper, and oil refining industries.
Wuxi Xinming Auto-control Valves Industry Co., Ltd. established in 2007 and located in Wuxi, Jiangsu, China is a manufacturer and supplier of auto-control valves. The company's product range includes Pneumatic Actuator, Pneumatic Ball Valve, Pneumatic Butterfly Valve, Electric Ball Valve, and Electric Butterfly Valve. These products control fluid flow in various systems. They serve industries that require precise valve operations. The company also provides technical support, offers installation guidance, maintains its products, and ensures customer support for its product line.
Ningbo Baodi Plastic Valve Co., Ltd., founded in 1994 and headquartered in Beilun, Ningbo, Zhejiang, China, manufactures plastic valves, pipes, and fittings. The company offers a range of products, including plastic ball valves, diaphragm valves, butterfly valves, check valves, and globe valves, along with various plastic pipes and fittings. These products are constructed from materials like FRPP, PVDF, UPVC, CPVC, and PPH. It holds an ISO9001 quality system certification and possesses over 20 valve patents.
VAPO Techniek is a supplier and distributor of automated valves for various media that was established in 1979 in Eindhoven, the Netherlands. The company's product inventory includes a wide range of knife gate, check, ball, and butterfly valves. It also offers pneumatic actuators, conversion sleeves, electric actuators, and switch boxes. These are primarily from the brands BAR, VALPES, SOCLA FRANCE, and CLORIUS CONTROLS. Aside from products, the company provides customization and testing services for customers needing additional support.
Merx trade is a distributor and supplier of valves and related products that was established in North Brabant, the Netherlands, in 2009. The company stocks products from its own brand MXT, and others such as Elit and 2MS11H. These products include valves for controlling the flow of industrial media, pipe couplings for connecting or repairing different pipe types, and strainers for filtering out particles or impurities. The company is certified to ISO 9001 and ISO 14001 standards, and mainly markets to clients in the maritime, chemical processing, and power generation industries.
ERG Tech., established in 1994 and based in Zhejiang, China, is a supplier of cooling systems for power generation and distribution and core components of renewable energy. The company distributes various kinds of oil pumps for locomotives, electrical control systems, UHV transformers, wind power generator coolers, and other pertinent gearbox and distribution components. The company’s oil pumps are the preferred product for high-speed railway and bullet trains designated by CRRC. The company is certified with ISO 9000 “Quality Management System Certification” and ISO 3834 “Certification for producers of metallic constructions related to quality requirements for welding”.
VACOM, based in Thuringia, Germany, has been a supplier of vacuum components and measurement solutions since 1992. Its product range includes electrical bushings, optical fiber feedthroughs, ion getter pumps, sight glasses, and vacuum sensors. The company has played a key role in making component cleanliness measurable, developing cleaning processes and standards for vacuum and purity classes, and assisting in designing the guidelines of the German Association for Industrial Parts Cleaning (FiT) for filmic contamination. The company has earned environmental certificates as a permanent member of the Thuringia Sustainability Agreement (NAT).
VAPTECH, founded in Bulgaria in 1914, is a supplier of electromechanical systems for new and existing hydropower plants worldwide. The company offers hydro turbines, inlet valves, and customized digital control systems that meet all project site requirements for small, medium, and large hydropower plants. It also specializes in upgrading and modernizing existing hydropower facilities to extend their operational lifespan enhance their efficiency and provide comprehensive maintenance and support services to ensure the ongoing reliability of hydropower plants.
Tameson was founded in 2013, in Eindhoven, the Netherlands as an online-based supplier and distributor of industrial products. The company offers a wide range of products, including valves, tubes and hoses, fittings, electrical accessories, and hydraulics. There are also Office supplies such as memory cards, cables, etc. along with measuring and controlling devices like thermometers, gauges, levels, and more. Industries such as Home and Garden, Food and Beverage, Automotive, HVAC, and Industrial Automation, amongst others, benefit from the products distributed by Tameson.
Valmet is a Finnish developer and supplier of process technology products for the pulp, paper, and energy industries that was established in Keilaniemi, Espoo, in 2013. The company offers production lines for paper products such as board or tissue, power plants for bioenergy production, and pulp mills for producing pulp from raw materials. It also provides flow control accessories for its products such as valves and pumps. The company's products are used mainly by clients in the pulp and paper, renewable energy, and wastewater processing industries.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Posi-flate Butterfly Valves |
2.2%
|
| 2 | Golden Harvest, Inc. |
1.6%
|
| 3 | Hayward Flow Control |
1.6%
|
| 4 | FLAPCON VALVES |
1.4%
|
| 5 | Swissfluid (USA), Inc. |
1.4%
|
| 6 | DeZURIK |
1.4%
|
| 7 | Butterfly Valves & Controls |
1.4%
|
| 8 | Valtorc International |
1.4%
|
| 9 | Siemens AG |
1.4%
|
| 10 | OPW ENGINEERED SYSTEMS CORPORATE |
1.2%
|
Derivation Method
The ranking is calculated based on the click share within the butterfly valve page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
35 | 28.5% |
|
China
|
18 | 14.6% |
|
Italy
|
17 | 13.8% |
|
Germany
|
16 | 13.0% |
|
Taiwan
|
4 | 3.3% |
|
France
|
4 | 3.3% |
|
Netherlands
|
4 | 3.3% |
|
Japan
|
3 | 2.4% |
|
Spain
|
3 | 2.4% |
|
Turkey
|
3 | 2.4% |
|
India
|
3 | 2.4% |
|
Switzerland
|
2 | 1.6% |
|
Canada
|
2 | 1.6% |
|
Poland
|
1 | 0.8% |
|
United Kingdom
|
1 | 0.8% |
|
Lithuania
|
1 | 0.8% |
|
Sweden
|
1 | 0.8% |
|
Denmark
|
1 | 0.8% |
|
Belgium
|
1 | 0.8% |
|
Austria
|
1 | 0.8% |
Slovenia
|
1 | 0.8% |
|
Bulgaria
|
1 | 0.8% |
Consus Co., Ltd.
40+ people viewing
Last viewed: 6 hours ago
■Features - CBE's air cylinder driven valve with actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limit switche...
Consus Co., Ltd.
50+ people viewing
Last viewed: 9 hours ago
■Features ・This is an air cylinder driven valve with a CBA actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, li...
Consus Co., Ltd.
30+ people viewing
Last viewed: 4 minutes ago
■Features ・Split type sanitary butterfly valve CBED's air cylinder driven valve with actuator. ・The operating mode is single-acting or double-act...
Consus Co., Ltd.
50+ people viewing
Last viewed: 2 minutes ago
■Features - Sanitary butterfly valve CBS electric actuator specification. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof st...
Consus Co., Ltd.
40+ people viewing
Last viewed: 8 hours ago
■Features ・Sanitary butterfly valve CBE electric actuator specification. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof st...
Consus Co., Ltd.
40+ people viewing
■Features - CBE's air cylinder driven valve with vertical actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limi...
Consus Co., Ltd.
50+ people viewing
Last viewed: 6 hours ago
■Features - CBA's air cylinder driven valve with vertical actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limi...
Consus Co., Ltd.
40+ people viewing
Last viewed: 9 minutes ago
■Features - Sanitary butterfly valve CBS electric actuator specification. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof st...
Consus Co., Ltd.
40+ people viewing
Last viewed: 6 hours ago
■Features ・Sanitary butterfly valve CBA electric actuator specification. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof st...
Consus Co., Ltd.
40+ people viewing
Last viewed: 7 hours ago
■Features - Simple structure with few components, easy to disassemble and assemble. - Seat ring is silicone (standard), EPDM is also available as a...
Consus Co., Ltd.
30+ people viewing
Last viewed: 7 hours ago
■Features - A type with an integrated arm lock coupling adapter on the exit side. - Seat ring is silicone (standard), EPDM is also available as an ...
Consus Co., Ltd.
30+ people viewing
Last viewed: 9 hours ago
■Features ・The structure is simple, there are few structural parts, and it is easy to disassemble and assemble. - Seat ring is EPDM (standard), si...
Consus Co., Ltd.
50+ people viewing
Last viewed: 7 hours ago
■Features ・The structure is simple, there are few structural parts, and it is easy to disassemble and assemble. - Seat ring is EPDM (standard), si...
Consus Co., Ltd.
50+ people viewing
Last viewed: 6 hours ago
■Features - Can be disassembled and reassembled simply by attaching and detaching the clamp band, saving you the hassle of cleaning. - Seat ring is...
Consus Co., Ltd.
40+ people viewing
Last viewed: 6 hours ago
■Features - CBS air cylinder driven valve with actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limit switches,...
Miyako Sangyo Co., Ltd.
100+ people viewing
Last viewed: 19 minutes ago
For air conditioning equipment, water treatment, and general industrial use. Lever, gear, cylinder, electric. Features ■Integrated aluminum valve ...
Tsukiji Manufacturing Co., Ltd.
120+ people viewing
Last viewed: 8 hours ago
Butterfly valve compatible with shoulder joint (S type). It can be fixed at an intermediate opening using the lock lever method.
3 models listed
Sasakura Co., Ltd.
270+ people viewing
Last viewed: 6 hours ago
Our ultra-low-temperature butterfly valves, which are used in the transfer lines of ultra-low-temperature liquids such as liquid fuel, liquid hydro...
4 models listed
Cherrybell Japan Co., Ltd.
60+ people viewing
Last viewed: 8 hours ago
P-One Shop
20+ people viewing
Last viewed: 9 minutes ago
■Butterfly valve type 57 (manual) side gear type ・In addition to excellent durability and flow characteristics, excellent operability allows for f...
P-One Shop
20+ people viewing
Last viewed: 18 minutes ago
■Valve features Manual butterfly valve: Open and close the disc-shaped valve body by rotating it 90 degrees. ■Purpose of use ・Large flow rate ・S...
P-One Shop
10+ people viewing
Last viewed: 1 minute ago
■Butterfly valve type 57 (manual) side gear type ・In addition to excellent durability and flow characteristics, excellent operability allows for f...
P-One Shop
20+ people viewing
Last viewed: 4 hours ago
■Valve features Manual butterfly valve: Open and close the disc-shaped valve body by rotating it 90 degrees. ■Purpose of use ・Large flow rate ・S...
P-One Shop
20+ people viewing
Last viewed: 9 hours ago
■Butterfly valve type 57 (manual) side gear type ・In addition to excellent durability and flow characteristics, excellent operability allows for f...
P-One Shop
20+ people viewing
Last viewed: 7 minutes ago
■Valve features Manual butterfly valve: Open and close the disc-shaped valve body by rotating it 90 degrees. ■Purpose of use ・Large flow rate ・S...
P-One Shop
20+ people viewing
Last viewed: 3 hours ago
■Butterfly valve type 57 (manual) side gear type ・In addition to excellent durability and flow characteristics, excellent operability allows for f...
P-One Shop
20+ people viewing
Last viewed: 1 minute ago
■Valve features Manual butterfly valve: Open and close the disc-shaped valve body by rotating it 90 degrees. ■Purpose of use ・Large flow rate ・S...
