All Categories
History
This section provides an overview for torque meters as well as their applications and principles. Also, please take a look at the list of 48 torque meter manufacturers and their company rankings. Here are the top-ranked torque meter companies as of December, 2024: 1.Checkline, 2.Kilews West USA Inc., 3.Mountz Torque.
Table of Contents
A torque meter is a device that measures the rotational force applied to a shaft, called torque.
Using the elastic force of a spring or a sensor, it is possible to obtain the force in the direction of rotation as a numerical value. Analog torque meters can display numerical values by themselves, while digital torque meters require a numerical value display and a power supply to operate.
Torque is classified into static torque and dynamic torque, and it is necessary to decide in advance which of the two needs to be measured depending on the purpose of measurement. In recent years, models that can measure both types of torque have become widely used.
Torque meters are used to apply a rotational force to a shaft and measure the force in the rotational direction numerically. They are used to measure and control the actual numerical values of the tightening force of screws, the torque to open and close container caps, and the torsional rigidity of shafts, beams, and other structural members.
In recent years, many of them can simultaneously measure not only torque but also strain and shaft rotation speed. Measuring and controlling torque is a very important item to ensure not only proper operation and maintenance of equipment but also safety in the event of life or failure.
The simplest principle of torque meters is to rotate torque meters directly connected to a shaft and display the rotational force as a numerical value by the repulsive force of a spring or the like. In recent years, various types of torque meters have become available, including those that use a sensor to measure the strain during rotation as a torsional angle of the shaft to calculate torque, and those that measure torque indirectly as well as directly.
A rotating shaft always has both a motor or other power source to transmit rotation and a turbine or other mechanism to utilize rotation, so a mechanical type torque meter with scale at the end of the shaft requires either mechanism to be removed to use it.
There are also torque meters that are inserted in the middle of the shaft, but the shaft is removed in the same way to install the torque meters. Therefore, mounting and dismounting must be considered when installing torque meters.
Torque meters are available in non-rotating strain gauge types, rotating magnetostrictive types, and strain gauge types. The rotary-type torque meters are used for experimental and research purposes and quality control of products. Torque is often heard in the tightening of tire nuts, and the specified torque varies depending on the type of nut.
Torque is also important in motors. Motors are used in many other places besides trains and automobiles, such as pumps, compressors, and elevators.
In motor manufacturing, torque meters are used to confirm that the final torque value is the desired one. Generally, after a motor is manufactured, a load is applied to the motor in a motor testing machine, and measurement is made with sensor-type torque meters.
There are two types of torque meters: non-rotating type and rotating type.
Non-Rotating Type
The non-rotating type has a gauge attached to the device to be measured, and the gauge displays the value of the torque applied. Torque wrenches used to check the tightening of car tires are set to the specified torque, and when the torque reaches that value, the wrench makes a sound to confirm that it has been tightened. Since the original torque has been confirmed by calibration equipment, the desired tightening can be achieved simply by setting the torque to the specified value.
Rotary Type
The rotary type is mainly used for torque measurement of motors, and torque meters are installed on the core of the motor via a coupling. In addition to the torque meters, peripheral devices such as a device to receive signals from the equipment and a PC for online confirmation are also required.
The torque meters measure the torsion or distortion of that shaft caused by the torque applied to the shaft, so the motor is rotated and the signal corresponding to the load is converted into a value called torque, which is then measured.
*Including some distributors, etc.
Sort by Features
Sort by Area
AIMCO, founded in the United States in 1970, is a manufacturer of pneumatic power tools. The company's product portfolio includes an extensive range of pneumatic hand tools, including impact wrenches, air drills, grinders, sanders, and riveters. It serves industries such as aerospace, agriculture, general industry, manufacturing, and medical devices. The company also provides services including tool selection, troubleshooting, and maintenance to ensure maximum tool longevity and exports to over 33 countries.
Mark-10 Corporation is a designer and manufacturer of force and torque measurement products established in 1979 and based in Copiague, New York, USA. The company offers torque gauges for measuring rotational force, force gauges for tension or compression testing, and compatible software for data collection and analysis. It also offers related accessories for its portfolio products, such as grips and fixtures, motorized test stands, and wire pull testers. The company’s products are mainly used in industrial manufacturing and automation operations.
Mountz Torque, founded in San Jose, CA, in 1965 is a manufacturer of torque products such as Robotic Screwdrivers, Torque Calibration, and Measuring Torque. The company's product portfolio includes Preset Torque Limiters, Torque Sensors, Run Down Adapters, Calibration Equipment and Torque analyzers and Sensor Accessories. Their products are used in the energy sector for wind turbine assembly and maintenance, critical aerospace components and systems and automotive assembly lines and maintenance applications. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation.
Checkline, founded in Lynbrook, New York in, in 1958 is a manufacturer of precision measuring instruments for quality control. The company's product portfolio includes force gauges, torque gauges, coating thickness gauges, wall thickness gauges, and textile test instruments. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also provide services including product selection, installation, preventative maintenance, troubleshooting, and repair.
Kilews West USA Inc. a California-based company established in 1984 is a manufacturer and supplier of precision fastening tools Products include brushless drivers with and without internal counters or power supplies, right-angle drivers, slip-clutch drivers, impact drivers, and torque meters. They also offer screw feeds, torque arms, battery products, and accessories. Their products are widely used in a range of industrial applications, including electronics manufacturing, automotive assembly, aerospace production, medical device manufacturing, and many others.
SEALS USA, Inc., a subsidiary of Japan’s Seals Co. Ltd., is based in Illinois, USA, and has been is a distributor of speed, torque, and force inspection instruments since 2009. The company stocks and markets various products from its parent company, including digital stroboscopes for measuring or testing speed, and digital force gauges for analyzing force or torque. It also offers onsite maintenance and repair services to customers requiring additional support. The company mainly markets to clients in the metalworking, industrial manufacturing, and industrial automation sectors.
GWY, Inc., founded in Greenfield, New Hampshire, in 1975 is a supplier of bolt installation tools for bridges, buildings, and large-scale industrial products. The company's product portfolio includes Turn-of-Nut wrenches, torque tools, bolt tension calibrators, rebar tools and hydraulic pumps. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also offer custom packaging, warehousing, and distribution services, and customer support.
IMADA, founded in Japan, in 1947 is a manufacturer of force gauges and Force Measurement related equipment. The company's product portfolio includes Load Cells (Force Sensors), Force Test Stands, Torque Testers, Torque Test Stands Attachments, and Grips & Fixtures. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also provide services such as technical and commercial consultation of force measurement products, repair, calibration and global distribution.
Aikoh Engineering Co., Ltd., established in 1976 and based in Osaka, Japan, is a manufacturer and supplier of force testers, interfaces, and system equipment. The company's product portfolio includes the digital force gauge RZE series, force measuring amplifiers, and torque testing machines. These products find applications in various industries, including manufacturing, electronics, and construction. The company is ISO 9001 and ISO 14001 certified, with local distributors in various countries including South Korea, India, and the Philippines.
Weber Schraubautomaten GmbH is a manufacturer of automated screwdriving systems and related components established in Wolfratshausen, Germany, in 1956. The company offers feeding systems for supplying materials or parts into industrial processes, screwdriving systems for automated industrial assembly processes, and handheld screwdrivers for manual phases in manned assembly lines. It also offers control systems for monitoring as well as managing assembly operations in facilities. The company operates internationally, with subsidiaries and partner distributors in the European Union and the Americas.
DEPRAG SCHULZ GMBH u. CO. is a German manufacturer of industrial tools that was established in Amberg, Bavaria in 1931. The company’s product portfolio includes air motors and tools such as vane motors, turbine motors, and impact wrenches, as well as handheld and stationary screwdrivers. It also offers automation solutions for industrial facilities, including robotic systems, tool changers, and assembly machines. The company’s products are used primarily by its clients in the automotive, aerospace, consumer electronics, and energy industries.
SAM Outillage, established in 1921 and located in Auvergne Rhone Alpes, France, is a manufacturer of hand tools and smart connected storage solutions. The company offers a range of products including screwdrivers, sockets, wrenches, and hammers. It also provides smart tools that allow operators to manage their settings via a single interface. The company's screw extractor allows the extraction of screws to the left and right and not overlooking the carrier in the concrete anchor. In 2023, the company won the Ecovadis bronze medal, and serves industries such as automotive, aeronautics, defense, and more.
Desoutter Industrial Tools is an electric and pneumatic assembly manufacturer founded in 1914 in London, The United Kingdom, now headquartered in Loire-Atlantique, France. The company's catalogue features many items, for instance industrial smart hubs, pivotware, grinders, sanders, and even air motors. Its long lasting presence in the industry has allowed it to participate in successful projects in diverse fields, like the automotive and aerospace industries. The firm has compiled good reviews from key players in multiple industries, such as Airbus, Caterpillar, Dacia Renault, Electrolux, and many more. Additionally, the firm features its products' downloadable software on its website.
ETH Messtechnik, established in 1987 in Gschwend, Germany, is a manufacturer of static or rotating transducers and individual sensors for measurement solutions. The company specializes in providing adaptive measurement technology solutions for various industries. The company's product range includes data loggers, temperature sensors, and pressure transducers. These solutions find diverse applications in industries such as automotive, aerospace, and research, offering accurate and seamless data acquisition. The main advantages of these products include improved process optimization, enhanced product quality, and streamlined data analysis.
Sure Torque Europe Ltd, founded in 2004 as a subsidiary of Sure Torque, Inc., is based in Budapest, Hungary, and is a manufacturer of closure torque testers for the industrial sector. The company’s product's includes top load force testers which measure the amount of force applied on caps during automated capping operations, and closure torque testers which measure the torque on bottle caps. It also stocks precision measurement products and aids from SmartLoadCell. The company’s products are used primarily by clients in the industrial manufacturing and packaging sectors, with applications in the recreational beverage market.
Presto Stantest Private Limited, established in 1997 and headquartered in Faridabad, India, is a global manufacturer of laboratory testing instruments for different industries. The company's products include plastic-polymer testing instruments. It also offers paper-packaging test systems and paint, plating, and coating testing instruments. Its environment testing chambers are specially manufactured to perform humidity and temperature testing. Over 13,000 customers worldwide use the company's products, and its notable clients include Dabur, Pepsi, and Havells.
ACRN, founded in 1997, is a manufacturer and designer of physical testing and measurement solutions with over 2000 equipped plants & laboratories and headquarters in France. The product categories are equipment used for torque testing, force measurement, leak testing, sensors, and measurement. The products include torque wrenches & screwdrivers, vacuum chambers, dynamometers, tube seattle testers, and compression test stands used in cosmetics, pharmaceuticals, food, packaging, and industrial markets. The company provides services such as calibration & metrology, custom-made equipment, specific testing, and after-sale services.
Labthink, established in 1989 with its international headquarters located in Boston, USA, is a manufacturer and supplier of testing instruments and solutions for quality control. Their products include gas permeability testers, tensile strength testers, thickness gauges, burst strength testers, and heat seal testers. These instruments are used to ensure the quality and performance of various materials and products in industries such as food packaging, textiles, and pharmaceuticals. Labthink holds ISO 9001:2000 certification and CNAS laboratory accreditation certificate.
DRUCK & TEMPERATUR Leitenberger GmbH, based in Germany, is a manufacturer of pressure measurement, temperature measurement, level measurement, torque & force measurement, and data logger equipment. Established in 1986, the company offers a wide range of measurement products that are used in various industries, including automation, process engineering, quality assurance, and research. One sample product is their pressure measurement equipment. These device measures the pressure of fluids and gases, and are used in various applications. Additionally, they offer technical support services, including training and consulting.
Hans SCHMIDT & Co. GmbH is the manufacturer of tension meter manufacturer founded in 1948 and was established in USA. The company control instruments are relied on all over the world in all applications that demand supreme precision and quality in production. The company Quality Management covers the area of design, development, production, installation and maintenance of our tension meters. They are devoted to advanced industrial processes and quality assurance, contributing to enhanced efficiency and superior outcomes.
Clinical Laboratory Automation (CLA) S.A., founded in 1997, is a manufacturer based in Delémont, Switzerland, developing automation solutions for medical laboratories, micro technology and watchmaking applications. As the center of expertise for Mitsubishi robots in Switzerland, the company offers various robotic solutions designed to enhance automated operations. It also develops sample management systems (SMSs) for component handling. The company also offers precision measurement devices for torque and force, height clearance, and precision metrology. It further produces specialized machinery for the watchmaking industry, including automatic rating control stations, manual and automatic winding stations, and demagnetization stations for watch movements.
Mecmesin, established in 1977, is a UK-based manufacturer and supplier specializing in designing force, materials and torque testing solutions for quality control. The company designs and manufactures force and torque testing equipment such as hand-held gauges, software-controlled testers, and torque systems. Their product portfolio also includes custom materials and torque test solutions for specialized applications, from grips and fixtures to fully automated test systems. Operating under ISO 9001 quality standards, Mecmesin serves clients in different industries globally with group headquarters in the United Kingdom and North America, and offices in France, Germany, China and Thailand.
BETA UTENSILI S.P.A., established in 1932, is an Italian manufacturer and supplier of workshop tools and industrial equipment, headquartered in Sovico, Monza Brianza. The company's product range includes over 16,000 tools for professional mechanics, catering to car repairs, industrial maintenance, and more. Among their offerings are the modular workshop equipment lines of Racing System (RS) C55 and Beta C45PRO, which include workbenches, modules, and more. They also provide various tools such as measuring and marking tools, cutting and general maintenance tools, plumbing tools, and power tools. These tools and equipment find applications in diverse industries, including automotive, aerospace, and mechanical engineering.
Established in 1954, Tokyo Measuring Instruments Laboratory Co., Ltd. (Tokyo Sokki Kenkyujo Co., Ltd.) is a manufacturer headquartered in Tokyo, Japan, specializing in stress measurement equipment. The company has developed a wide range of strain gauge transducers, essential components for stress measurement in general and civil engineering. The company also produces other instruments, such as the portable digital strainmeter for automatic multi-point measurements. With overseas representative offices in China, Germany, and 43 other countries, TML serves global customers, providing solutions for the safety and efficiency of structures.
Ono Sokki Co. Ltd., founded in 1954 and based in Yokohama, Japan, is a manufacturer, distributor, and supplier of electronic measuring instruments and control systems. Its products include sound level meters, vibration meters, and FFT analyzers, utilized in research and development, quality control, and by production line engineers, particularly in the automotive industry. The company was the first to be designated by the government as a producer of sound level meters in Japan and also obtained ISO 14001 certification in 1997.
ATESTEO GmbH & Co. KG, certified by ISO 9001:2015 and established in 1983 and based in Braunschweig, Germany, is a manufacturer and supplier of drivetrain testing equipment. The company's product range includes drivetrain test benches, drivetrain simulation software, and drivetrain test services, catering to diverse industries such as automotive, aerospace, marine, power generation, and heavy machinery. Its services include customization of equipment, technical support, and training on products and services. With a long period of experience, it consistently exceeds expectations in quality and service.
Sturtevant Richmont is a manufacturer established in 1940 with its headquarters in Chicago, Illinois, specializing in torque tools and precision measurement equipments. Their product range includes torque wrenches, screwdrivers, torque testers, and calibration equipments. These tools are widely used in automotive, aerospace, energy, manufacturing, and maintenance sectors for assembly operations, and quality control. Sturtevant Richmont holds certifications such as ISO 9001 and ISO 17025, ensuring in delivering tools that meet the demanding standards of modern industries.
Delta Regis Tools Inc., based in Fort Pierce, Florida, is a manufacturer of torque-controlled electric screwdrivers, torque arms, screw presenters, torque meters, and related accessories, founded in 1992. The company has been providing production assembly facilities with electric screwdrivers, offering products that are designed with ergonomics in mind and undergo rigorous quality control testing. It serves customers across the world, providing excellent customer service and industry knowledge. Its products are used in a wide range of industries, making it a sought-after partner for many businesses.
MicroStudio S.r.l., established in 1991 and based in Via Giacomo, Puccini, is a manufacturer of measurement instruments and machinery for the control and production of springs and small parts. The company’s products are life test machines, feeding systems, control onboard machines, precision load testers for springs, and automatic machines to set springs. The products are used in optical, electronic, mechanical, and industrial industries. The company obtained the ISO 9001 certification for quality management systems in 2005.
ITH Bolting Technology headquartered in Meschede, Germany is a manufacturer and system supplier of bolting technology that distributes industrial bolting, torque wrenches, and tensioning tools solutions. The company’s bolting tool portfolio contains hydraulic bolt tensioning cylinders and hydraulic torque wrenches. They also offer bolting solutions for tightening and loosening industrial bolt connections from M16 (3/8’') and up. Additionally, they offer tension and torque tool rental. Their products are used in various industries such as wind energy, oil and gas, power generation, mining, and shipbuilding.
HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for providing the best technology and expertise in test and measurement. With branches in 30 countries, it provides clients with different solutions ranging from sound and vibration to propulsion efficiency and weighing. Examples of product offerings include transducers, amplifiers, sensors, strain gauges, data acquisition systems, etc. Such products are used in different markets, including aerospace, automobiles, telecom audio, and more. Besides supplying products, they also entertain their customers with after-sales services.
Unipulus is a manufacturer of sensors and measuring instruments that was established in 1977 in Tokyo, Japan. The company specializes in precision equipment for measuring a wide range of factors such as durability, tension, and rotational force. Its products include force gauges that test material quality, load cells that measure compression, and torque meters. The company also offers customization, repair, and calibration services for customers needing additional support. Some of its notable clients include Komatsu, Olympus, and Kyoto University.
Sensel Measurement is an ISO 9001 certified French manufacturer and distributor of sensors as well as measurement electronics established in 1994 and based in Vincennes, Paris. The company's product lineup includes pressure sensors, load cells for various capacities, and displacement sensors for linear or angular positioning. It also offers various display units such as panel mount units with USB connection, multi-input data logger displays, and digital handheld displays. Aside from its products, the company provides after-sales maintenance services, product customization, personnel training, and technical support for clients needing additional assistance.
Anlidar Industrial Co., Ltd. is an ISO 9001:2015 certified manufacturer and distributor of industrial electric torque control screwdrivers, founded in 2018 and located in New Taipei City, Taiwan. The company is a subsidiary of Saing Ei Corp. which manufactures torque testers, error-proof counters, and workstation accessories. Its product line includes screw feeders, auxiliary arm, cordless screwdrivers, and power controllers. These products are used in electronic, electric vehicles, automation and robotics, and general assembly processes.
Wenzhou Yiding Instrument Manufacturing Co., Ltd., based in Liushi, China, is a manufacturer of mechanical instruments. Its product line includes torque testers measures and ensures precise torque application, spring testing machines evaluates spring strength, test benches assesses mechanical and electrical properties, tensile testers gauges material pull strength, and push force gauges measures both push and pull forces in industrial applications. These instruments are integral in various industrial applications, offering durability and precision. With an emphasis on quality and adherence to a "quality first, customer first" policy, the company obtained national licenses and become a global supplier, capable of replacing imported products.
Crane Electronics, Ltd., a company established in 1971 and based in Leicestershire, UK, manufactures digital torque wrenches, transducers, and testers for automotive, aerospace, construction, and other industries. One of its popular products is the IQWrench2 digital torque wrench, a torque with an integrated data collection system. This product is critical for industries that must ensure their components are tightened at the correct level and can be audited. The company's torque can perform several different measurement modes and algorithms. The company also provides service and calibration of its torque equipment outside the UK and USA to meet customers' demands.
Hire Torque Ltd Group is a British supplier and distributor of controlled bolting as well as joining equipment established in 1996 and headquartered in Cramlington, Northumberland. The company’s product inventory includes lifting equipment, bolt tensioners for uniform bolt loading, and hydraulic splitters or nut cutters. It also offers bolting software, portable pipe cutting machines, and a wide selection of ENERPAC brand tools. Aside from marketing products, the company also provides maintenance and repair, engineering, calibration services. It primarily serves clients in the oil and gas, wind energy, and petrochemical industries.
Andilog Technologies, founded in 1986, is a manufacturer based in Vitrolles, France, producing measuring instruments for force and torque applications. The company’s measuring devices include manual test stands and material testing devices. Other products include test benches, force and torque gauges, and portable force and torque sensor displays. Complementing these products, the company develops data acquisition and analysis software. Various fixtures and accessories are also available, such as peeling fixtures and sliding tables, wire crimp terminals, and self-closing clamps. The company serves multiple industries, including automotive, electricity, and medical.
Guangzhou Biaoji Packaging Equipment Co., Ltd. is headquartered in Guangzhou, China as a supplier of masks, flexible packaging, thermal, spout sealing, and battery diaphragm testing equipment since 2002. The company offers packaging testing equipment such as melt flow indexers and tensile, drop dart impact, leakage, and cap torque testers. It also supplies environmental test instruments such as modified atmosphere refrigerators, pressure cooker test chambers, salt spray test chambers, ozone aging test chambers, and temperature & humidity test chambers. GBPI is an ISO 9001-certified supplier and its instruments are used in food, pharmaceutical, printing industries, packaging, and research institutions & colleges.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Checkline |
12.7%
|
| 2 | Mountz Torque |
11.1%
|
| 3 | Kilews West USA Inc. |
11.1%
|
| 4 | GWY, Inc. |
9.5%
|
| 5 | ATESTEO GmbH & Co. KG |
6.3%
|
| 6 | Hottinger Brüel & Kjær |
6.3%
|
| 7 | AIMCO |
4.8%
|
| 8 | SEALS CO., LTD. |
3.2%
|
| 9 | DEPRAG SCHULZ GMBH u. CO. |
3.2%
|
| 10 | Guangzhou Biaoji Packaging Equipment Co.,Ltd. |
3.2%
|
Derivation Method
The ranking is calculated based on the click share within the torque meter page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
Japan
|
9 | 24.3% |
|
United States of America
|
7 | 18.9% |
|
Germany
|
6 | 16.2% |
|
France
|
4 | 10.8% |
|
United Kingdom
|
3 | 8.1% |
|
China
|
2 | 5.4% |
|
Hungary
|
1 | 2.7% |
|
India
|
1 | 2.7% |
|
Switzerland
|
1 | 2.7% |
|
Italy
|
1 | 2.7% |
|
Taiwan
|
1 | 2.7% |
Belgium
|
1 | 2.7% |
211 products found
211 products
Suzuko Precision Co., Ltd.
250+ people viewing
Last viewed: 11 hours ago
Very Fast Response
Measuring range: 0.2~5mNm
5 models listed
Suzuko Precision Co., Ltd.
370+ people viewing
Last viewed: 11 hours ago
Very Fast Response
■Measurement range 0.2～500mNm *Other model numbers are available.
10 models listed
Suzuko Precision Co., Ltd.
640+ people viewing
Last viewed: 4 hours ago
Very Fast Response
■Measurement range 0.2～2,000mNm *Other model numbers are available.
10 models listed
Suzuko Precision Co., Ltd.
390+ people viewing
Last viewed: 7 hours ago
Very Fast Response
Measuring range: 2-200mNm
7 models listed
Suzuko Precision Co., Ltd.
420+ people viewing
Last viewed: 11 hours ago
Very Fast Response
Measuring range: 2-2,000mNm
10 models listed
Suzuko Precision Co., Ltd.
370+ people viewing
Last viewed: 11 hours ago
Very Fast Response
Measuring range: 10-500mNm
6 models listed
Suzuko Precision Co., Ltd.
420+ people viewing
Last viewed: 10 hours ago
Very Fast Response
Measuring range: 50-5,000mNm
7 models listed
Japan Measurement System Co., Ltd.
320+ people viewing
Last viewed: 1 hour ago
Very Fast Response
This is a torque measuring instrument that allows you to easily set the torque of electric screwdrivers and measure the torque of tools that requir...
2 models listed
Suzuko Precision Co., Ltd.
320+ people viewing
Last viewed: 6 hours ago
Very Fast Response
Measuring range: 50-5,000mNm
7 models listed
![ST Torque Meter [Measure tightening torque value in 1Nm units]-Japan Pralad Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3000976202309046.png)
Japan Pralad Co., Ltd.
250+ people viewing
Last viewed: 11 hours ago
Standard Response
5.0 Company Review
■ With a built -in high -precision torque sensor, it can "measure the actual torque value actually tightened in 1Nm units" and save it. (It is not ...
3 models listed
ATESTEO Japan Co., Ltd.
40+ people viewing
Last viewed: 19 hours ago
High accuracy, high durability, non-contact, and resistant to electromagnetic noise flange type torque meter (torque sensor, torque meter) ■High p...
ATESTEO Japan Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
This is a shaft-type torque meter that measures torque and speed in a compact body. This solves the problem of shaft type, which is the decrease in...
Sanetech Co., Ltd.
560+ people viewing
Last viewed: 8 hours ago
■Features ・Small and lightweight ・Built-in amplifier type ・Non-contact type, high reliability and high responsiveness ・Easy to center the shaft...
10 models listed
Daiji Co., Ltd.
220+ people viewing
Last viewed: 6 hours ago
Very Fast Response
■For periodic calibration of tightening force This is a tightening strength control tester exclusively for Thaimate. You can measure the strength o...
3 models listed
Yagyu Shokai Co., Ltd.
10+ people viewing
Last viewed: 9 hours ago
Very Fast Response
■Features ・Measures the opening and closing torque of caps, lids, and screws of various containers such as beverages and pharmaceuticals, etc. ・M...
SANKO ELECTRONIC LABORATORY CO.,LTD
490+ people viewing
Last viewed: 11 hours ago
Standard Response
The power transmitted by the rotary axis is converted to a twist of the measured spring, and the torque meter body that is displayed as a white tor...
5 models listed
Tokyo Measuring Instruments Laboratory Co., Ltd.
190+ people viewing
Last viewed: 13 hours ago
Standard Response
5.0 Company Review
This is a torque meter that measures driving torque and braking torque when driving an actual vehicle. Torque can be measured with analog output by...
TONE CO., LTD.
30+ people viewing
Last viewed: 15 hours ago
Fast Response
■Features - Notifies overtorque prevention with buzzer sound and LED. Allowable values can be set in the range of 50 to 95% of the target torque....
ATESTEO Japan Co., Ltd.
30+ people viewing
Last viewed: 23 minutes ago
■PTO torque meter that extracts engine power from work vehicles such as tractors as power for work machinery. This is a rotary torque meter that me...
Japan INSDAC Co., Ltd.
20+ people viewing
Last viewed: 1 hour ago
Standard Response
KYOWA ELECTRONIC INSTRUMENTS CO., LTD
870+ people viewing
Last viewed: 4 hours ago
Standard Response
This is a small, lightweight, non-contact transmission torque converter with a built-in amplifier. Maintenance work can be reduced by contactless t...
10 models listed
KYOWA ELECTRONIC INSTRUMENTS CO., LTD
380+ people viewing
Last viewed: 11 hours ago
Standard Response
This is a high-speed torque converter that can measure torque at a maximum of 15,000 rpm, and has a rated capacity of 0.2 to 5 N・m. Equipped with ...
5 models listed
Nippon Sokki Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
5.0 Company Review
■Model 1602A-01 Model 1602A-01 Clamp-on Propulsion Monitoring System Converts any shaft into a torque transducer ■Product overview Model 1602A and...
Nippon Sokki Co., Ltd.
10+ people viewing
Last viewed: 1 day ago
5.0 Company Review
■Model 366 Low range reaction torque monitoring gauge, range 0.2g-cm to 42g-cm, rated output ±5%, ±10% ■Product overview The 366 Low Range Torque ...
Nippon Sokki Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
5.0 Company Review
■Model 6105 Model 6105 Slip Ring Assembly for 1' Bore, 4 Channel, 8 Channel, 12 Channel Available ■Product overview Model 6118 slip ring assembly ...
Nippon Sokki Co., Ltd.
10+ people viewing
Last viewed: 2 hours ago
5.0 Company Review
■Model 1602A Model 1602A Clamp-on Propulsion Monitoring System Converts shaft to torque transducer (also provides rpm and horsepower) ■Product ove...
Nippon Sokki Co., Ltd.
10+ people viewing
Last viewed: 34 minutes ago
5.0 Company Review
■Model 2106 Model 2106 Rotary Measurement System 6-channel system, inductive power No batteries required. wireless telemetry ■Product overview The...
Nippon Sokki Co., Ltd.
10+ people viewing
Last viewed: 12 hours ago
5.0 Company Review
■Model 9300 Clamp-on Rotary Torque Transducer System Converts any shaft into a torque transducer ■Product overview The Series 9300 Torque Meter is...
Nippon Sokki Co., Ltd.
10+ people viewing
Last viewed: 22 hours ago
5.0 Company Review
■Model 2102-WDC Model 2102-WDC Rotary Measurement System 2-channel system, inductive power No batteries required. wireless telemetry ■Product over...
Nippon Sokki Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
5.0 Company Review
■Model 2103 Model 2103 Rotary Measurement System 3-channel system, inductive power No batteries required. wireless telemetry ■Product overview The...
