This section provides an overview for torque wrench tester as well as their applications and principles. Also, please take a look at the list of 43 torque wrench tester manufacturers and their company rankings. Here are the top-ranked torque wrench tester companies as of November, 2023: 1.IMADA, Inc., 2.Carl Walter Produktions GmbH & Co. KG, 3.Bmf Torque Wrench Co.
A torque wrench is an instrument used to calibrate and adjust the actual torque number, which is used to tighten bolts.
By using a torque wrench on site, it is possible to check the accuracy and strength of the tools used for tightening and prevent accidents and any problems caused by incorrect values set during work.
It is important to check the specifications of torque wrenches in advance because the size of wrenches that can be measured and the magnitude of torque vary depending on the product.
Torque wrenches are used in two ways: for actual work of tightening bolts and nuts, and for measurement to check how much torque can be tightened by using the attached scale and digital meter.
Especially in the field where accurate tightening torque is required (maintenance of aircraft and industrial machinery), using a torque wrench with a deviation in accuracy due to years of use may cause irreparable accidents and troubles.
Torque wrenches are indispensable to maintain a high level of torque accuracy at all times.
There are two main types of torque wrenches: mechanical and digital.
Digital torque wrenches can calibrate the accuracy of torque wrenches ranging from a few Newton meters to 1000 Newton meters (unit of torque), depending on the model.
Torque wrenches consist mainly of a torque measuring instrument (graduated or digital), a stand on which the torque wrench is placed, and a handle.
When the handle is turned, the torque wrench on the stand is gradually tightened and the torque is read by the measuring instrument.
The torque of the torque wrench can be adjusted and calibrated according to the difference between the pre-set torque of the wrench and the torque displayed by the tester's measuring instrument.
The accuracy of the torque wrench is approximately less than 1%, allowing adjustment with a very high degree of accuracy.
*Including some distributors, etc.
Sort by Features
Sort by Area
Ruland Manufacturing Co., Ltd. was founded in 1937 and is headquartered in Marlborough, Massachusetts. The ISO 9001:2015-certified company began by creating a wide range of products such as bicycle tire pumps and various fittings. The company pivoted strategies in the 1970s to manufacture fittings such as shaft collars and couplings, which are now used in medical devices, robotic systems, food processing, and in machine tools. The company’s current product list includes machine components, rubber bumpers, rollers, couplings, and indexing plungers.
Bmf Torque Wrench Co., founded in 1984 with headquarters in the USA, is a manufacturer of hydraulic tools and supplies. The company's product portfolio includes hydraulic torque wrenches, power sockets, and drive heads. Industries served include the automotive, petrochemical, construction, electric power, and equipment manufacturing industries. It also provides an extensive size range of complete torque wrench systems to meet the needs of residential construction, commercial construction, OEM manufacturers, and even vehicle repair specialists. The company also offers customized, design, engineering, and manufacture of custom torque wrenches to meet client-specific requirements.
HYTORC, established in 1968, is a manufacturer based in the United States, specializing in the production of bolting systems, including pneumatic, hydraulic, and electric bolting systems. The company’s products cater to a wide range of industries, including steel mills, mining equipment, refineries, power plants, and wind turbines. With an experienced engineering team, it continues to develope solutions for every bolting application imaginable for custom projects. Its latest product line features patented industry-firsts like hands-free operation to keep tool operators at a safe distance from the application, onboard documentation systems to provide job accountability and assurance, and more.
Imada, Inc., founded in 1996, is a manufacturer of measuring instruments based in Northbrook, Illinois. The company offers a wide range of force measuring instruments, including force testers and displacement testers, as well as torque testers, durometers, stroboscopes, and tachometers. These instruments find applications in various industries, including aerospace, automotive, medical, electronics, and construction equipment. Imada also provides repair and calibration services, as well as data acquisition software. Imada holds ISO 9001 and ISO/IEC 17025 certifications. The company is also a member of the International Society of Weighing and Measurement.
Pasternack headquartered in Irvine, California, is part of the Infinite Electronics family of brands, established in 1972 by Murray Pasternack, as a supplier of RF and Microwave components. The company retails various types of products, including connectors, switches, cables, couplers, and filters. They have over 40,000 in-stock products and have partnered with 19 international distributors serving customers in over 35 countries. The company offers contract assembling, where they assemble custom Cables for same-day shipping. The company earned the ISO 9001 certification in 2015 and offers expert technical support and 24/7 customer service.
Daniels Manufacturing Corporation (DMC), founded in 1947 and headquartered in Orlando, Florida, is a manufacturer of precision tooling catering to various mission-critical industries, including aerospace, defense, rail, and marine sectors. Its product line encompasses a wide range of crimping tools, torque tools, contact insertion and removal tools, EMI/RFI shielding band tools, and wire crimp pull testers. Its tools are used in mission-critical electrical systems in various industrial applications, backed by AS9100 and ISO 9001 certifications for quality management in the designing, manufacturing, and repair of its products.
Snap-on Incorporated, a company founded in 1920, based in Kenosha, Wisconsin, USA, is a manufacturer and marketer of high-end tools and equipment for professional use in the transportation sector. The company provides a range of products, including wrenches, sockets, screwdrivers, pliers, diagnostic tools, power tools, and storage devices. These items are designed to satisfy the requirements of customers in the automotive, heavy-duty, equipment, marine, aviation, and railroad industries. It also provides customers with digital printing, graphic design, and engineering support services.
GWY, Inc., founded in Greenfield, New Hampshire, in 1975 is a supplier of bolt installation tools for bridges, buildings, and large-scale industrial products. The company's product portfolio includes Turn-of-Nut wrenches, torque tools, bolt tension calibrators, rebar tools and hydraulic pumps. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also offer custom packaging, warehousing, and distribution services, and customer support.
Chicago Pneumatic, founded in 1901 and now a subsidiary of Atlas Copco Group of Sweden, is a manufacturer headquartered in Rock Hill, South Carolina, specializing in industrial tools and solutions, particularly power tools and air compressors. The company offers a range of products, including cordless, electric, hydraulic, and pneumatic tools. They also provide workplace equipment and solutions, such as lift equipment, workshop cranes, workshop presses, and torque wrenches. Additionally, CP offers compressors, construction equipment, and air motor solutions. These products find applications in various industries, including vehicle service, maintenance and repair of mining, construction, and infrastructure equipment, as well as industrial production.
GEDORE is a German manufacturer of standard and industrial tools that was founded in 1919 in Remscheid, North Rhine-Westphalia. The company produces various hand tools such as wrenches, chisels, and hammers, as well as torque tools including torque multipliers and testers. It also offers specialty tool sets, such as electrical and plumbing toolkits. GEDORE maintains a network of subsidiaries and sales partners in more than 70 countries, with production facilities in South Africa, Brazil, England, and Austria.
CLAS EQUIPEMENTS, established in 1996 and based in Chignin, France, is a manufacturer of technical equipment and tools for light vehicles, commercial vehicles and heavy goods vehicles. The company offers workshop equipment like lifts, air compressors, wheel service equipment and a range of technical tools like flood lights, cleaning guns, pneumatic tools and hand tools for the automotive and heavy goods vehicle sectors. It also offers vehicle solutions for hybrid and electric cars. The company's full catalog of products and its manuals can be downloaded on the website.
Torque Master is a manufacturer and supplier of tools based in India. The company deals in Torque wrenches, screwdrivers, and multipliers for precise tightening of nuts and screws to an optimum rotational force. There are also sockets, joints, adaptors, ratchets, and various handles along with other items that aid in tightening and fastening, and for being used as an industrial or hand tool. They cater to Heavy Industries, Petroleum, Automotives, Thermal Power Plants, Oil Industries, etc.
Norbar Torque Tools, Ltd. is a specialized designer and manufacturer of torque tightening equipment founded in 1942 and based in Oxfordshire, United Kingdom. The company produces a broad range of torque tightening and measuring tools including standard and electronic wrenches, screwdrivers, multipliers, and calibration equipment — as well as battery and pneumatic tools. These primarily supply clients in the oil, gas, power generation, manufacturing and mining sectors. Norbar Torque Tools also offers custom engineering solutions to its customers, as well as after sales services like calibration and repair.
Tungaloy Corporation, established in 1934 and headquartered in Fukushima, Japan, is a manufacturer of metal cutting tools and industrial products. The company's product line includes turning, milling, and drilling tools with various dimensions. It also provides various resources such as machining calculator tools, tool navigators, and insert selection guides. Its products are designed to maximize the amount of metal being removed from parts. The company holds several certifications, including ISO 9001 and OHSAS 18001. It serves various industries, including automobile, construction, aerospace, and medical.
ROTHENBERGER Werkzeuge GmbH, is a manufacturer of pipe tools and machines, established in 1949 and headquartered in Stadt Kelkheim, Germany. The company holds a comprehensive product line, with over 6000 different offerings that encompass the entire spectrum of plumbing and pipe tools. These tools find application in construction sites, refrigeration, gas, environmental technology, and maintenance. Some of its products are hand tools, threaders, and testing kits. Moreover, the company also provides spare parts for many of its products, ensuring continued functionality and support for its customers.
Teng Tools USA, founded in 2017 with headquarters in the USA, is a manufacturer and DTC (direct to customer) supplier of handheld tools and tool organization systems. The company's extensive product line includes a wide range of power tools, air tools, and tool management systems, and full socket cases and sets with all standard fittings. The company was originally created in 1985 in Sweden by the founder, who saw a niche hardware supplier that built every tool the trade needed and the cases to move them. All products are now sold on the Teng Tools USA online store.
Carl Walter Produktions GmbH & Co. was established in 1919, in Germany as a manufacturer and distributor of tools. The company produces and supplies fastening tools such as spanners, screwdrivers, wrenches, and ratchets for standard applications along with Torque wrenches, both mechanical and electrical, torque screwdrivers having measuring ranges from 0.1 Nmm to 17 Nm, Torque multipliers, and Torque testing devices for industrial bolting applications. These products vastly cater to the Automotive, Food, Medicine, Railroad, and surface mining industries among many others.
Torque-Tech Precision Co., Ltd, founded in Taiwan, in 2000 is a manufacturer of Torque Wrench and torque screwdriver. The company's product portfolio includes torque testers, torque multiplier, Torque Wrench Accessories and injection molded components for various applications, including electronics, consumer goods, and packaging. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company has partnerships and collaborations with distributors, retailers, and industrial suppliers.
Crane Electronics, Ltd., a company established in 1971 and based in Leicestershire, UK, manufactures digital torque wrenches, transducers, and testers for automotive, aerospace, construction, and other industries. One of its popular products is the IQWrench2 digital torque wrench, a torque with an integrated data collection system. This product is critical for industries that must ensure their components are tightened at the correct level and can be audited. The company's torque can perform several different measurement modes and algorithms. The company also provides service and calibration of its torque equipment outside the UK and USA to meet customers' demands.
Koki Holdings Co. Ltd., established in 1948 and based in Tokyo, Japan, is a manufacturer of several power tools, including drilling, cutting, sawing, fastening, and grinding tools. The company began making chemistry equipment in 1954 and launched its first disk grinder in 1957. In 1960, it began making pneumatic tools, and in 1962, it started producing gas engine equipment. It began making printers in 1963 and woodworking machinery in 1969. In 1978, it opened its first overseas subsidiary in West Germany, and in 1979, it opened its first overseas manufacturing subsidiary in Singapore.
One-Too Company is a French manufacturer and distributor of control and measurement products that was established in Carros, Alpes-Maritimes in 1992. The company primarily produces various sensors including torque, displacement, temperature, and force sensors. It also offers signal conditioners, data acquisition systems, and data management and analysis software. Aside from its products, the company provides consultation, testing and calibration services to its clients in the automotive, rail, aerospace, and industrial manufacturing sectors.
Rami Yokota B.V., established in 1896 and based in Amsterdam, The Netherlands, is a distributor of power tools. Its product range covers assembly tools, power tools, air hoists, impact sockets, and chisels, intended for varied applications from service workshops to industrial and offshore usage. These tools significantly enhance production processes, improving efficiency and reducing costs. The company offers direct customer support in Germany, the UK, France, broader Eastern Europe, and South Africa, distributing Yokota, NovaTork, Toku, and Red Rooster brands.
Facom, founded in 1918 and now a subsidiary of Stanley Black & Decker Inc., is a hand tool manufacturer headquartered in Morangis, Ile-de-France, France. The company's product range includes boosters, pliers, light-emitting diode lights and torches, torque control devices, and lifting equipment. The company also offers safety lock systems to prevent foreign material exclusions when working at heights. These products find applications in various industries, including automotive, especially the car-racing sector, aerospace, deep-sea exploration, and extreme sports.
SAM Outillage, established in 1921 and located in Auvergne Rhone Alpes, France, is a manufacturer of hand tools and smart connected storage solutions. The company offers a range of products including screwdrivers, sockets, wrenches, and hammers. It also provides smart tools that allow operators to manage their settings via a single interface. The company's screw extractor allows the extraction of screws to the left and right and not overlooking the carrier in the concrete anchor. In 2023, the company won the Ecovadis bronze medal, and serves industries such as automotive, aeronautics, defense, and more.
Piergiacomi SUD Srl, founded in 1979 and headquartered in Monteprandone, Italy, is a manufacturer and designer of hand tools and blanking tools for electronics and electrical engineering. The company offers a diverse product portfolio, including cutting tools with hardening treatment of the cutting edges, systems with cutters for PCB separation, semi-automatic multilayer welding systems, cutting tools for cutting at different heights from the plane, and pliers with round beaks and cut at the tip. These tools find applications in various industries, including goldsmithing, optical fiber, hair extensions, modeling, and construction.
HEYCO Qualitätswerkzeuge GmbH & Co. KG is based in Remscheid, North Rhine-Westphalia, and is a German manufacturer of hand and power tools that was originally founded in 1937 before its acquisition by the Würth Group in 2006. The company’s extensive product portfolio includes hand tools such as pliers and wrenches, power tools such as grinders and sanders, workshop equipment including tool trolleys and workbenches, and automotive tools. The company is certified to DIN and ISO 9001:2015 manufacturing standards, and operates internationally via a network of partnered distributors.
Ingersoll Rand Power Tools and Lifting, founded in 1859 and based in Davidson, North Carolina, USA, is a manufacturer of power tools and lifting equipment. Its product range encompasses bolting, assembly solutions, surface preparation, applied power, and construction tools. Some of its products are nutrunners, torque multipliers, riveting tools, and wrenches. It also offers air starters, air motors, barring motors, and air starters. The company maintains ISO 9001 certifications for its manufacturing facilities and adheres to global standards.
Irimo, a brand under SNA Europe, headquartered in Spain, has been a manufacturer of hand tools since its establishment in 1930. Its product line includes tool storage and kits, wrenches, torque tools, sockets and ratchets, and vices and clamps, catering to professionals worldwide in various fields like lighting, carpentry, and plumbing. The company also offers related accessories such as textile backpacks workbenches and transporters. The company has in-house repair centres and a network of external repair centres covering repairs, maintenance and calibration for its tools.
Sugisaki Meter Co., Ltd., established in 1971 with headquarters in Ryugasaki City, Japan, is a manufacturer of torque measuring tools and equipment. The company's product line includes industrial digital torque drivers, digital torque wrenches, daily-use digital torque drivers, wrench inspection devices, and software for transferring torque tester data to personal computers. Its services include periodic torque tool calibration and inspections, as well as maintenance programs necessary for correct functionality. Digital torque drivers and digital torque wrenches are used for numerous applications, including engine assembly, industrial machinery assembly, and maintenance.
SCS Concept is a manufacturer of quality control and production equipment founded in 2005 and headquartered in Milan, Italy. The company's product list includes various test benches for power tools and wrench testing, digital torque wrenches, torque analyzers, ultrasonic positioning systems, and joint simulators. It also offers software for production management and accessories, such as torque multipliers and reversible ratchets. The company's in-house laboratory is ISO 17025 certified for its additional torque and angle calibration services. Its products chiefly serve clients in the industrial manufacturing, railway, automotive, and aerospace sectors.
BEHA Innovation GmbH Ltd was established in 1974 and is based in Glottertal, Germany as a manufacturer and supplier of polyurethane and polyester profiles and conveyor belts for transport and drive applications. The company’s product portfolio includes V-belts, round belts, hollow round belts, ridge-V-belts. The products are used in various industries, such as food, pharmaceuticals, packaging, and logistics. The products are crucial components in conveyor systems, enabling efficient and dependable performance. It also provides welding tools and accessories for on-site installations and service.
BIG DAISHOWA Americas (BDA) is a North American distributor of precision metal cutting tools and machine tool accessories that was originally established in 1990 as Kaiser Precision Tooling before its acquisition by the Japanese company BIG DAISHOWA in 2022. Based in Hoffman Estates, Illinois, the company stocks various industrial tooling products such as boring and cutting tools, speed increasers and angle heads, tool holders, and measuring instruments. These are mainly used by BDA's clients in the agricultural, energy, medical, and automotive industries.