All Categories
History
This section provides an overview for v-belt pulleys as well as their applications and principles. Also, please take a look at the list of 56 v-belt pulley manufacturers and their company rankings. Here are the top-ranked v-belt pulley companies as of December, 2024: 1.Optibelt Corporation, 2.J.W. Winco, Inc., 3.Torque Transmission.
Table of Contents
Engaged in research on nitride semiconductor growth using the MBE method at Waseda University Graduate School. After graduating from graduate school in 2016, he joined a non-ferrous metal manufacturer.
Engaged in equipment maintenance and engineering work at metal smelting plants. Moved to a chemical manufacturer in 2022. Engaging in similar tasks.
A V-belt pulley is a disk-shaped component used to transmit power using a V-belt.
The V-belt pulley is a belt with a V-shaped cross section and is used in combination with the V-belt pulley, which has a V-shaped groove and a larger contact area than the flat belt and pulley, resulting in higher transmission efficiency.
V-belt pulleys are used in many rotating machines, and V-belt pulleys are one of the most frequently used pulleys in Japan.
V-belt pulleys are used in a wide variety of equipment, from home appliances to industrial equipment. The following are examples of V-belt pulley applications:
Due to the strong engagement between the belt and pulley, V-belt pulleys are used in machines that rotate at high speeds. On the other hand, V-belt pulleys are not suitable for use when the distance to the power transmission object is short.
When the distance is short, flat belts tend to be used, which are subject to less wear.
The V-belt has a V-shaped cross section, and the V-belt pulley has V-shaped grooves dug into it; the V-belt fits into the grooves of the V-belt pulley and rotates the pulley by friction.
The key points of power transmission are belt tension and belt surface roughness.
The stronger the belt tension, the stronger the engagement with the pulley, which creates higher transmission efficiency. However, too much tension may cause the belt to break, so proper adjustment is necessary.
The strength of the belt tension can be quantitatively controlled by using a belt tension gauge.
V-Belt pulleys have a wide range of contact surfaces with the belt, so the roughness of each contact surface is an important factor in determining transmission efficiency. The rougher the surface creates a higher frictional force and the higher the transmission efficiency.
On the other hand, it also has the disadvantage of increasing wear and shortening the life of the machine. After prolonged use, the grooves on the V-belt pulley gradually become worn and the surface becomes smooth. In this condition, the belt and pulley tend to slip and transmission efficiency is reduced, so replacement is necessary.
If the V-belt pulley is used with the motor side misaligned with the machine side, the V-belt pulley and pulley will wear faster, and an unexpected load will be applied to the equipment. This condition is expressed as "off-centering."
To prevent the above, centering of V-belt pulleys is a very important operation. Centering using water thread is a widely used method. Yarn is applied to the upper and lower surfaces of the pulley on the motor side and the machine side, and the lifting of the yarn is compared.
With the yarn pressed against one side, the other side is floated, and the timing when the yarn leaves the pulley surface is checked. This method allows visual confirmation of the parallelism and misalignment of the surfaces, and is repeated several times while making fine adjustments.
In recent years, laser centering devices have become widely available because they are easy to use and highly accurate.
V-belts and V-belt pulleys gradually wear over time. Since V-belts wear out faster, V-belts need to be replaced more frequently. However, V-belt pulleys also wear gradually and need to be replaced as they age.
The wear rate of a V-belt pulley can be measured with a measuring instrument called a groove gauge; the groove gauge is pressed against the groove of the V-belt pulley and the gap between the groove and the groove gauge is measured with a gap gauge. The groove gauge must be used according to the standard of the V-belt pulley, such as the ISO standard, or wedge belt.
Different groove gauges should be used depending on the diameter of the V-belt pulley. It is necessary to confirm the standard and size of the V-belt pulley to be measured in advance.
As for the wear limit, in most cases, the manufacturer's allowable value is 0.8 mm gap. However, since it varies depending on the model, the allowable value of the V-belt pulley used should be checked before measurement.
*Including some distributors, etc.
Sort by Features
Sort by Area
Martin Sprocket & Gear, Inc. (MSG) is an Arlington, Texas-based manufacturer and supplier of power transmission products, material handlers, and industrial hand tools. Founded in 1951, the company primarily serves clients in the pulp and paper, petrochemical, automotive, and agriculture industries. The company produces various products including conveyors, sprockets, sheaves, bushings, and custom products for client companies like John Deere and General Electric. MSG has over thirty operating plants across the United States, with retail locations and storage facilities on three continents.
J.W. Winco was originally founded as Ganter in 1894 in Germany. Winco specializes in parts manufacturing. Parts offerings the operating parts segment including handles, adjusting, and positioning parts; clamping parts segment featuring tensioning, clamping, switching, and levers; and finally the machine parts segment with indexing, locking, mounting, connecting elements, guides, spindles, rollers, magnets, casters, and wheels. Winco’s complete catalog contains over 75,000 standard parts. Winco is also ISO 9001 certified. Winco offers free CAD downloads and technical documentation for many arts.
Optibelt Corporation, founded in the year 1872, and based in Illinois, USA, is a manufacturer and supplier of tools and belts for safety protection. Their product portfolio includes a wide variety of belts which includes V-belts, rubber, polyurethane, and ribbed belts. The company also offers service tools, metal products, automotive spare parts, couplings, X-ray protection, and sport resistance bands. The products are used in various industries which include automotive, paper, agriculture, oil and gas, food and beverage, road construction, and textile.
Stens was founded in 1970 and is headquartered in Jasper, Indiana, and is a manufacturer of aftermarket replacement parts for various industries. The company's product list consists of air filters, cooling system components, engine components, handheld equipment parts, and, lubricants that have a wide range of applications in turf management, golf course, automotive, construction, and agricultural equipment markets. The company also provides Franzen chain sharpening machines with a warranty of two years that are needed in hardware stores, rental stores, tree trimming businesses, and equipment repair shops.
B&B Manufacturing, established in 1998, and based in Indiana, USA, is a manufacturer and supplier of mechanical components for different industries. Their product portfolio includes gates, timing belts, pulleys, drive parts, flanges, gears, sheaves, and sprockets. The company also offers a wide variety of power transmission and precision mechanical components with consultation services. The products are used in various industries which include 3D Printers, ACHE sprockets, CNC machinery, medical, robotics, and vending machinery.
Torque Transmission, founded in 1947 and headquartered in Fairport Harbor, Ohio, is a manufacturer and designer of custom power transmission components. The company specializes in producing precision-machined components, such as pulleys, clutches, and flexible couplings, for various industries, including automation, packaging, and material handling. Its main products encompass timing pulleys, roller chain sprockets, speed reducers, and flexible shaft couplings. These components find applications in power transmission systems and motion control equipment. The company is ISO 9001 certified, ensuring a quality management system.
The Timken Company (Timken) was founded in 1899 and is headquartered in North Canton, Ohio. Timken designs, manufactures, and manages engineered bearings and industrial motion products worldwide. Timken operates in two segments, Mobile Industries and Process Industries. The Mobile Industries segment’s portfolio includes bearings, seals, and lubrication devices and systems. The Process Industries segment provides industrial bearings and assemblies; industrial motion components, such as gears and gearboxes; and linear motion products, couplings, seals, lubricants, chains, belts, and related products and services to OEMs and end users in various industries.
TB Wood’s, Inc., established in 1857 and headquartered in Chambersburg, Pennsylvania, is an ISO 9001:2015 certified designer and manufacturer of industrial couplings and belted drive solutions. The company offers a range of products including industrial couplings, belted drive solutions, and highly-engineered coupling products such as Sure-Flex and Dura-Flex elastomeric couplings, Form-Flex disc couplings, and Jaw couplings. Its products are used in various industrial controls, transferring power from motors or engines to industrial machinery.
SDP/SI was founded in 1950 and is situated in New Hyde Park, New York. SDPP/SI is a manufacturer of precision gears and high-quality mechanical components used in the aerospace, industrial manufacturing, medical technology, and robotics fields. The company manufactures parts in a variety of materials including alloy steel, stainless steel, bronze, brass, nylon, and titanium. The company also provides coating services such as heat treating, zinc plating, and painting. Additional custom options are available including manufacturing to customer drawings and specifications.
Onvio LLC, established in Salem, NH in 2004 is a manufacturer of precision planetary gearboxes, cycloidal reducers, and timing belt pulleys. Their product range includes Backlash Cycloidal Gearboxes, Speed Reducers, Wheel Drives, Antenna Drives, and Robotic Joints. Their products are used in industries such as Food and Beverage Processing, Pharmaceutical and Biotechnology and Chemical and Petrochemical. The company also provides services including national distribution, product selection, customized services, technical support and customer service.
Congress Drives, established in 1915, is a manufacturer of zinc and aluminum cast pulleys and custom die cast components suxh as groove pulleys, variable pitch pulleys, and step cone pulleys used in HVAC and refrigeration applications, evaporative coolers, overhead door operators, air moving blowers, and agricultural equipments. The company has a 9001 certified facility in Fenton, Missouri has manufacturing capabilities die casting, machining, finishing, proactive purchasing, and warehousing. The company is a member North American Die Casting Association.
March Performance, Inc., is a manufacturer of automotive performance products in Naples, FL, United States, and was founded in 1988. The company produces products such as bracket kits, serpentine systems, and pulleys for Chevy, Ford, Oldsmobile, Cadillac, and Jeep vehicles. It also offers air cleaners, compressors, clutches, manifolds, and accessories like adjustment rods, ram air kits, water pumps, engine covers, and power steering kits. The company has dealers in Alabama, New Hampshire, North Carolina, Texas, and West Virginia.
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
Biedler’s Belts, founded in 1950 and located in Hack Wilson Way, Martinsburg, WV, is a manufacturer of belts, pulleys, and sprockets. The belts produced by the company include single, round, synchronous, and powerband joined used in the manufacturing and processing sectors. It also manufactures long-length beltings, V-blet pullets, synchronous sprockets, and bushings from steel, cast iron, and stainless steel. The company has repair capabilities for motors, power tools, and pumps for sewage and pool applications.
TERRE, established in 1946, is headquartered in Texas, USA and is a provider of cost-effective replacement parts, general-purpose mechanical motion parts, and outdoor power equipment. The centrality of product and service quality underpins all their endeavors. TERRE™ is a supplier headquartered in the United States that specializes in providing authentic OEM replacement and general-purpose mechanical motion components, finished goods, and solutions to a global customer base. These customers include retailers, manufacturers, dealers or distributors, and individuals seeking solutions for various applications such as home improvement, agriculture, lawn and garden maintenance, and other related areas.
V-Belt Global Supply, established in 2008 and based in Sioux Falls, SD, is a manufacturer and supplier of premium, industrial-strength belts. The company's product range includes classic V-belts, classic banded V-belts, Kevlar V-belts, metric V-belts, cogged belts, and wedge belts. These belts are essential for transmitting power and maintaining motion across various applications. serving industries such as agriculture, HVAC, construction, logging, and manufacturing, these belts ensure operational efficiency and longevity. Its services are diverse, from providing expertise in belt replacement, maintenance, and industrial equipment parts to offering specialized solutions for road construction and heavy machinery.
Samco Sales Inc was founded in 1981 and is headquartered in Houston, Texas. The company is a manufacturer and distributor of industrial equipment, serving metal casting, forging, manufacturing, marine, and trucking markets. The company’s product lines also include standard and galvanized wire rope, fencing material, farming tools, and steel lock keys. The company’s metal forging services include small to medium components of steel and other alloys with several surface finishing options available.
Metro Sprocket & Gear, Inc. was established in 1985 and headquartered in Midlothian, Texas. The company manufactures custom gears, sprockets, and prototype parts used in agricultural machinery, construction equipment, power transmission equipment, machine tools, and other applications. The company’s product segments include splines and custom, helical, plastic, and worm gears. The company’s custom servicing options include several CNC and milling. Heat treating, milling, surface grinding, and other alteration options are also available.
Pooley Inc. was founded in 1932 by Samuel H. Pooley as a custom fabrication conveyor belt shop in Western New York State. Pooley manufactures, distributes, and services industrial machines, supplies, and components. Pooley’s product offerings include power transmissions, industrial supplies, conveyor belting & accessories, and other industrial supplies. In addition, Pooley offers services including conveyor belting, and hose assemblies among others. Additionally, Pooley can perform liaison purchasing on behalf of customers for products not usually held in stock.
Global Bearings Import (GBI), based in Austell, Georgia, provides quality bearings and related products in the power transmission industry. Established in 1977, GBI offers ball bearings often used in aerospace, roller bearings, seals, and various other power transmission components. As part of an integrated family of companies under KS Supplies, GBI boasts exceptional customer service, technical expertise, and competitive pricing, making it a trusted partner for businesses seeking reliable and efficient solutions for their bearings needs.
Accent Bearings Co. Inc. was established in 1993 and is a distributor for industrial bearings. Accent Bearings offers a full range of bearing-related parts including ball, cylindrical, radial, thrust, and standard, as well as CAM followers, rod ends, belts, sheaves, busings, bronze busings, bar stock, pulleys, chains, sprockets, gears, speed reducers, motors, clutches, brakes, couplings, shafts, shaft accessories, oil seals, gauges, retaining rings, air cylindeers, conveyor belts, and fluid power process control equipment.
USA Roller Chain & Sprockets, founded in Winter Garden, Florida, in 1931 is a supplier of industrial chains, sprockets, bearings, motors, and reducers. The company's product portfolio includes Roller Chain Breakers, Roller Chain Pullers, Roller Chain Tensioners, Roller Chain Lubricant, and Hollow Pin Roller Chain. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also provides services including national distribution, product selection, troubleshooting, repair and customer service.
Hangzhou Chinabase Machinery Co., Ltd., founded in 1992 and based in Hangzhou, China, is a manufacturer specializing in an array of products, including power transmission components. Its key products encompass chains and sprockets for industrial power transmission, gearboxes to enhance torque and reduce speed, couplings for shaft connections, and gears used across industrial applications. Its products find applications in automation, conveyor technology, packaging, food, pharmaceuticals, and more. The company maintains quality and sustainability, holding certifications like ISO 9002, ISO 9001, API, ISO/TS 16949:2002, and ISO 10012 measurement management system.
Morskate Aandrijvingen B.V., headquartered in Hengelo, the Netherlands, is a designer and manufacturer of advanced drive technology, components, and assemblies. The company's main products include mechanical drive technology, electrical drive technology, and drive couplings. Its product range includes gearboxes, stepper motors, and chain and belt transmissions. These products are used in material handling systems, in OEM industrial machinery, and packaging systems. The company welcomes inquiries for the production of custom drive solutions.
Tecnamic GmbH, established in 2016 and headquartered in Werl, Germany, is a designer and manufacturer of coupling types for drive solutions. The company's main products include V-belt drives, timing belt drives, and chain drives. It also produces electric motors, slide bearings, and drive elements. These products are used in various equipment, including compressors, air conditioning systems, and material handling systems. The company also offers customized solutions for use in tough, heavy-duty drives, such as those required by mining and excavation machines.
PIX Transmissions Ltd, based in Bandra, Mumbai is the manufacturer of Belts and mechanical power transmission products in India. The company has belt manufacturing units and an automated rubber mixing facility. The company has a major market share in the UK, Germany, and UAE. The distribution centers in these locations are equipped with technical, commercial, and logistical support. It has loyal partners in 100 diverse countries. It manufactures V-belts, Poly-V belts, banded belts, special belts, industrial belts, etc.
Normelemente KG, established in 1958 and based in Markgroningen, Baden-Wuerttemberg, is a German manufacturer and supplier that specializes in standard parts and machine components. Norelem offers an extensive catalog of more than 70,000 products, catering to the needs of engineers and designers in various projects. Their product range includes clamping technology, measuring and testing components, electromechanics, systems and components for machine and plant construction, and material handling and transport solutions. These products find applications in diverse engineering fields, such as automotive, aerospace, machinery, and robotics sectors.
SKF UK is the British division of SKF, originally founded in 1907 and headquartered in Gothenburg, Sweden. SKF designs, develops, and manufacturers bearings, seals, lubrication systems, and services worldwide, with industrial and automotive segments, providing solutions for industries including aerospace, agriculture, transportation, food and beverage, general machinery, material handling, mining, energy, paper, and wind energy. SKF UK offers rolling bearings, mounted bearings, automotive seals, lubrication management, vehicle aftermarket services, waste electric products, and electronic equipment products as well as services including maintenance, remanufacturing, customization, and training.
W M Berg, founded in 1967 and based in Cudahy, Wisconsin, is a manufacturer and supplier of precision industrial parts. The company delivers ISO 9001:2015 certified products and services, including assemblies, bearings, belts & chains, couplings & shafts, gears, fasteners & hardware, pulleys & sprockets and more. W M Berg provides designing, developing, manufacturing and testing facilities to its clients in the aerospace, medical and motion control industries. Its distributors include Applied Industrial Technology and Motion Industries.
Megadyne Group established in West Caldwell, NJ in 1980 is a manufacturer of power transmission belts, thermoset and thermoplastic polyurethane belts, rubber timing and v-belts. Their product portfolio includes synchronous belts, such as timing belts and timing pulleys, designed for precise power transmission in synchronous drive systems, Flat Belts and specialty profile belts, used for specific power transmission. The company serves industries such as Automotive and Transportation, Agriculture and Farming and Industrial Machinery and Equipment.
Caterpillar, established in 1932, and based in the year Peterborough, UK, is a manufacturer and supplier of machinery tools. Their product portfolio includes air conditioning kits, batteries, belts, electronics, engine parts, hardware, sensors, supplies, and machinery tools. The products are used in various industries which include construction, mining, diesel, natural gas, industrial turbines, and electric locomotives. The company also offers the right parts and fast support for machines to achieve maximum productivity.
Wilhelm Herm. Müller GmbH & Co. KG founded in Garbsen, Germany, in 1916, is a manufacturer and supplier of technical components and semi-finished products made of rubber and plastic. It offers products including polyurethane timing belts, pulleys, rubber molded parts, and CNC milled products. The company’s products are certified by the European Union and it has 200 employees. It is a founding member of MULCO, the suspension technology cooperation FETECH, and the PDM cooperation.
MiMotion was founded in 1946 in Birmingham, Alabama and today operates under Genuine Parts Company. The company operates as a distributor and supplier of custom parts for both maintenance repair and operating replacement part market and the OEM market. The company’s product line includes many types of products including abrasives, chemicals & lubricants, hand & power tools, hose & fittings, and process pumps & equipment. The company also provides maintenance repair and operating replacement parts as well as OEM parts ensuring compatibility with existing customer operations.
APSOparts, launched in 2008 in Zurich, Switzerland, is a manufacturer and supplier of complex engineering solutions for small to large businesses in Europe. The company offers solutions for sealing, engineering plastics, fluid handling, anti-vibration, and drive technology. It makes products, such as adhesive tapes, corrugated hoses, timing pulleys, round bars, and threading sealings. Its services include supply chain and logistics, product finders, DirectUP order upload, DirectUP product configurator, and 3D CAD files.
Jason Industrial was founded in 1958 in Fairfield, New Jersey. Today, Jason Industrial is the hose division of AMMEGA and manufactures a range of both industrial and hydraulic hose, couplings, equipment, and accessories. Jason Industrial products are designed for the industries in which they serve including agriculture, chemical, HVAC, material handling, and mining. Jason Industrial's product lines include industrial hose products, hydraulic hose products, agricultural hoses, skateboard products, and belts. Jason Industrial also provides guides and resources for distributors and end users.
SERVICE COMPANY was founded in the 1930s in Pittsburgh, Pennsylvania. Today BEARING is a manufacturer and national distributor of bearings and power transmission parts and components. BEARING offers services such as field service inspections, damage analysis, surveys, reverse engineering, repair, part identification, and selection. BEARING parts include seals, gaskets, accessories, couplings, electric motors, gearboxes & gearing, chains, sprockets, belts, sheaves, material handling equipment, linear motion equipment, lubrication, and, naturally, many varieties of bearings.
Bearing Boys Ltd, established in 2006 and based in the United Kingdom, is a supplier of online bearing and power transmissions. The company procures different products such as grease, lubricants, castors, gearboxes, and fixings from Boeing, Dyson, Rolls Royce, and BAE systems. Apart from this, the company also sells metrology and measuring tools, janitorial equipment, site safety equipment, and PPE by partnering with various brands and distributors. The company holds ISO 9001, ISO 14001, and ISO 45001 certifications and is working towards ISO 50001 certification.
TYMA CZ, s.r.o. was established in 2004 and is based in Brno, Czech Republic is a supplier and distributor of power transmission and conveyor belts. The company’s product portfolio includes timing belts, V-belts, flat belts, conveyor belts, pulleys, clamps, and more. The power transmission and conveyor belts are designed for quality, performance, and durability. The products are used in various industries such as metal fabrication, automotive, aerospace, food processing, and packaging. It is devoted to providing its customers with quality products and services, and it is constantly expanding its product range and services.
Princess Auto Ltd., founded in 1933 and based in Winnipeg, Canada, is a supplier of an assortment of tools and equipment with over 50 stores across Canada. In 1977, it opened its first store in Edmonton, Alberta, and became a retailer. The company serves several workers, including inventors, farmers, and tradespeople and stocks products such as outdoor power equipment, hand tools, and hydraulics. It sells items from several brands, such as Dealer’s Choice, Braber Equipment, and King Canada, and it also has a foundation that provides financial assistance to trades students enrolled at Canadian colleges.
Statewide Bearings, founded in 1974 and based in Kewdale, Western Australia, is a supplier of bearings and power transmission products. The company's products include housings, pumps, seals, ball screws, and electronic actuators. These products are employed in linear motion, power transfer, lubricants, agriculture, and automobile industries. It also offers heavy equipment training, inspection, machining, servicing & maintenace, and refurbishment services to customers. The company acquired Wear Minimisation Technology in 2017 and Southern Engineering Services in 2014.
PTI EUROPA A/S is a supplier of bearings and transmission parts, founded in 1991 and located in Tønder, Denmark. The company’s products include plummer blocks, belts and belt pulleys, ball and roller bearings, rod ends, and roller chains. It is an ISO 9001:2015 certified company which provides powder coating, technical documentation, and 2D/3D drawing services. It also provides adaptation and processing services, adjusting product features such as increasing the diameter of products like bearing housings.
QuaSimply Bearings Ltd, established in 2004 and based in Lancashire, UK, is an online supplier of bearings, oil seals and power transmission products. The company's range of products include types of bearings, power transmission products, balls & rollers, cycling products and engineering parts. Its metric and imperial bearings are used in automobiles, engines, gearboxes, agricultural and packaging industries. The company was assessed and upgraded by BSI to the new ISO 9001:2015 standard.
Sati, established in 1974, is a supplier of gears and power transmitting elements based in Localita Crespellano, Valsamoggia. The company offers open-transmitting components such as plate wheels, bevel gears, roller chains, motor slides, and loving devices. It also supplies gearboxes, eclectic motors, speed variators, foot mounting kits, and accessories like racks, sprockets, couplings, pulleys, and blocks used in agriculture, industrial machinery, ceramic, woodworking, mining, and cement industries. The company is a trademark of Ammega Italia S.p.A unipersonale coordinated and managed by ALPHA ABMD HOLDCO BV.
AIMS Industrial, founded in 1988 and located in Milperra, Australia, is a supplier of industrial equipment. The company offers various products, including abrasives, electricals, material handling, storage, and safety equipment. The company's products are durable for different industries, such as mining, construction, and manufacturing. It provides multiple threading, measuring, plumbing, drilling, and inspection tools. The company also offers customer services that include technical support and customized services throughout the buying process.
Tri-State Bearing Company was founded in 1950 and is headquartered in Evansville, Indiana. The company is an independently owned and operated distributor of a full line of bearings, mechanical power transmission, and motion control products to customers across North America in the agricultural, automotive, manufacturing, and pharmaceutical industries. The company has several product lines such as chains & sprockets, clutches & breaks, and couplings in addition to its namesake of bearings. The company also offers services such as custom-length modifications of certain components such as roller chains, electronic repair of drivers and controllers, and on-site gearbox assembly.
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
Cadence Supply Company is headquartered in Homewood, Illinois, and is a U.S.-based industrial products distributor offering a wide array of industrial products for MRO and other production requirements ranging from standard off-the-shelf items to custom die-cut parts and materials to both individuals and Fortune 500 companies. The company’s product offerings include fasteners, roller chains, linear motion products, and products made from various materials. In addition to in-house-manufactured items, the company is a distributor for SMC, CS Hyde, New York Wire, and Spyraflo, among others.
BDI Exppress was established in 1935 and is headquartered in Cleveland, Ohio. BDI develops and deploys custom distribution and supply chain solutions for customers across Asia, Europe, and North America. BDI serves multiple industries including automotive, primary metal, food processing, public utilities, pulp and paper, mining, material handling, bearings, mechanical power transmission, electrical power transmission and motion control, linear motion, pneumatic and hydraulic fluid power, industrial, safety, and material handling.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Optibelt Corporation |
5.9%
|
| 2 | J.W. Winco, Inc. |
4.1%
|
| 3 | Torque Transmission |
3.7%
|
| 4 | Stock Drive Products/Sterling Instrument - SDP/SI |
3.7%
|
| 5 | Stens |
3.3%
|
| 6 | B&B Manufacturing |
3.3%
|
| 7 | Martin Sprocket & Gear, Inc. |
3.3%
|
| 8 | Biedler’s Belts |
3.0%
|
| 9 | Pooley, Inc. |
3.0%
|
| 10 | Onvio LLC |
3.0%
|
Derivation Method
The ranking is calculated based on the click share within the v-belt pulley page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
24 | 61.5% |
|
Germany
|
3 | 7.7% |
|
United Kingdom
|
3 | 7.7% |
|
India
|
2 | 5.1% |
|
China
|
1 | 2.6% |
|
Netherlands
|
1 | 2.6% |
|
Sweden
|
1 | 2.6% |
Australia
|
1 | 2.6% |
| Czechia (Czech Republic) | 1 | 2.6% |
|
Denmark
|
1 | 2.6% |
|
Italy
|
1 | 2.6% |
1 products found
1 products
Union Maeda Co., Ltd.
260+ people viewing
Last viewed: 10 hours ago
It is a steel sheet V pulley from φ70 to φ254.
