All Categories
History
This section provides an overview for rubber seals as well as their applications and principles. Also, please take a look at the list of 108 rubber seal manufacturers and their company rankings. Here are the top-ranked rubber seal companies as of December, 2024: 1.Mac Divitt Rubber Co., LLC, 2.ENA - Advanced Rubber Technologies, 3.Accurate Rubber Corporation.
Table of Contents
A rubber seal is a seal to protect equipment and maintain the functionality of the packing, preventing the intrusion of dust and other contaminants from the outside.
Rubber seals can be installed in an integrated groove, and double-lip rubber dust seals are also available to prevent oil from being scraped out.
Rubber seals are made of nitrile or fluoro rubber and can be used in a wide range of temperatures.
Rubber seals are used to seal a variety of locations to provide a proper seal.
Rubber seals are used to seal grease, dust, reciprocating dust, gaps, rolling bearing plummer blocks, automotive anti-vibration and wind noise, helmet box packing, and various box packings and various other box packings.
Among rubber seals, the contact type rubber seal (DDU or LLU) has high frictional torque and limited high-speed performance, but its grease sealing performance is slightly better than non-contact rubber seals, and it has the best dust-proofing and waterproofing properties.
In contrast, among rubber seals, the non-contacting rubber seal (VV or LLB) has lower frictional torque, better high-speed performance, better grease sealing performance than the Shield, and better dust resistance than the Shield, but is not waterproof.
On the other hand, shield (ZZ) has lower frictional torque, better high-speed performance, better grease sealing, and better dustproofing, but is not waterproof.
The contact type rubber seal has a rubber seal plate that is fitted into the outer ring. Since the rubber seal is in contact with the inner ring, the entry of dust from the outside is extremely small.
The seal material is mainly NBR, and the critical operating temperature range is about -40 to +120°C.
There are several types of rubber seals that can be classified according to material. Since the characteristics of rubber seals vary depending on the material, it is important to select the most suitable one for your application.
It is a sealing material with a good overall balance of mechanical strength and other physical properties, as well as cost. It is widely used for oil seals and O-rings.
It has excellent resistance to oil, heat, and ozone, and is used in transmissions and other drive train equipment.
It has superior heat resistance, oil resistance, and fuel oil resistance compared to other rubber materials, and its use as a sealing material for engines and drivelines is expanding.
Although it has excellent heat and ozone resistance, this material is weak against mineral oil-based lubricants, making it suitable for brake fluid and water-based liquid seals.
It is one of the general-purpose rubbers and has excellent abrasion resistance. It is a material with a good total balance, including cost, but it is not suitable for industrial oil and is used as a sealing material for brakes.
It has excellent heat resistance, abrasion resistance, and ozone resistance. Known for its wide range of hardness adjustment, it is mainly used for construction machinery.
*Including some distributors, etc.
Sort by Features
Sort by Area
Accurate Rubber Corporation, located in Conyers GA, USA, was founded in 2019 and is a custom rubber and silicone parts manufacturer, supplier, and distributor. Its products include extruded profiles, lathe-cut seals, die-cut gaskets, silicone tubing, and more used in elastomers such as silicone rubber, silicone foam, silicone sponges, and fluoro silicone. The company also offers services including design and engineering, part numbering, printing, and manufacturing, and its processes are ISO 9001:2015 certified.
Custom Rubber Corp is a manufacturer of custom rubber products based in Cleveland, Ohio, United States. The company is into the design and molding of rubber products for various types of applications across various industries such as automotive, medical, and marine. Custom Rubber's wide range of rubber products includes gaskets and seals, molded rubber diaphragm, and rubber molded handle grips. Custom Rubber Corp also offers a complete suite of design and engineering services and support.
Aqua Ultraviolet, founded in 1975 with headquarters in the USA, is a specialist manufacturer of ultraviolet sterilizers, sanitizers, and filters. The company's extensive product line includes dynamic room air sterilizers, HVAC air duct sterilizers for residential and commercial use, and UV sterilizers used in the water supply for medical facilities, municipal reclaimed water, aquaculture, and drinking water systems. The company also serves various other markets with its equipment, including aquariums, recreational water, greenhouses, medical equipment manufacturers, and pharmaceutical makers.
Minor Rubber, a manufacturer founded in 1914 in Newark, New Jersey, has its origins in the history of Alling Rubber Company. The company's contributions extend to the space program, supplying specialty products for missile fuel cells. It's product range includes standard and custom molded, extruded, and latex dip molded rubber products. The company earned recognition for its state-of-the-art, superb-quality rubber products, commencing with hose couplings and expanding to encompass custom mats, gaskets, and fire hoses. Throughout its journey, it ventured into defense, aerospace, and electronics markets, upholding a for excellence.
Apple Rubber Products Inc. was established in 1971 and is a manufacturer of O-rings, rubber seals, and custom sealing devices. The company is headquartered in Lancaster, New York. Its products are used in various industries including aerospace, automotive, and medical. Some of the company's products include O-rings, medical seals, custom molded shapes, composite seals, filter seals, and more. These products are used by a wide range of customers in the commercial and industrial sectors. Additionally, the company provides services that can custom design and manufacture sealing devices to meet the specific needs of its customers.
Trim-Lok, Inc, founded in Buena Park, CA, in 1977 is a manufacturer of f PVC push on edge trim, trim seals and EPDM rubber seals. The company's product portfolio includes Rubber Extrusion, Plastic Extrusion, Edge Trims, Plastic Profiles and Rubber Profiles. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Chemical and Petrochemicals. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
Standard Washer & Mat, Inc., started in 1929, is a manufacturer of custom non-metallic washers, gaskets, and intricate shapes using materials such as rubber, plastic, sponge & foam, insulations, and vulcanized fibre serving the semiconductor, oil & gas, food processing, water & sewage systems, and mining industries. The company in Progress Drive, Manchester, has services such as die cutting, kiss cutting, laminating, slitting, and stamping of rubber, plastic, foam, sponge, and specialty materials. The company meets the quality standards of ANSI, ASME, ISO 9001:2008 and is ITAR compliant.
ENA Advanced Rubber Technologies, established in 2016 in the USA with headquarters in the USA, is a manufacturer of custom-molded rubber parts and shapes, engineered tools, and material compounds. The company's broad range of products, which include plugs, stoppers, rings, seals, gaskets, and tubes, among many others, are manufactured across three countries, including Taiwan, China, and Vietnam, for original equipment manufacturers in the USA. ENA Advanced Rubber Technologies has over 1,600 employees and over 2,000,000 square feet of ISO 9001:2008-certified manufacturing space.
Houston Rubber Co., Inc., established in 1946 and headquartered in Sylmar, Los Angeles, operates as a custom manufacturer of rubber products. Their diverse offerings encompass industrial rubber products like conveyor belts and hoses, automotive essentials including tires and belts, medical supplies such as gloves and catheters, and miscellaneous items like toys and flooring. The company produces rubber products through various molding techniques, including rubber to metal bonding, compression and transfer molding, and die cutting. The materials they work with, not limited to, include Neoprene, EPDM, Buna Nitrile, and Hypalon. The company's Quality Management System conforms to AS9100 industry standards.
MV Industries Gaskets Inc, founded in Long Beach, CA, in 2018 is a manufacturer of gaskets and seals. The company's product portfolio includes a wide range of gaskets, including metallic gaskets, non-metallic gaskets, spiral wound gaskets, and rubber and O-rings, lip seals, and rotary shaft seals. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.
3Axis Development was founded in 2005 and is headquartered in Boynton Beach, Florida. 3Axis is a manufacturer of custom machinery, equipment, and tools. 3Axis offers prototyping services such as stereolithography, FDM, SLS, DMLS, 3D architectural modeling, and 3D printing. 3Axis also offers numerous manufacturing services such as injection molding, plastic prototype extrusions, waterjet cutting, precision sand castings, sheet metal fabrication, vacuum & pressure forming, Swiss CNC machining, carbon fiber prototypes, 3D custom signage, fiberglass fabrication, and medical device engineering.
Pawling Engineered Products Inc., established in New York in 1946 is a manufacturer of seals and gaskets that are used in industries including aerospace; pharmaceutical and transportation, Their product portfolio includes Inflatable Seals, Inflatable Clamps, Inflatable Actuators, Compression Seals and Gaskets and Septa. he company's products find applications including sealing out radiation in nuclear power plants, Airframe Component Bonding, Conveyor Brakes or Stops and sealing vertical lift doors and many more. The company is ISO 9001 certified since 1994
Bay Rubber Company, established in 1952 and based in California, USA, is a manufacturer and distributor of commercial and consumer rubber products and components. The company is a fabricating distributor and contract manufacturer of custom products to serve industries like aerospace, chemical and healthcare. It produces rubber products and components including the assembly of fluid transfer systems, industrial hoses and seals. The company can produce original designs and drawings created by the customers through its CAD/CAM cutter and C02 laser processing technology.
Tempron Products Corporation, established in 1959 and headquartered in Milford, Massachusetts, is a manufacturer specializing in diaphragms, rubber bonding, bonded assemblies, and precision all-rubber parts. The company has a diverse product catalog that includes a range of offerings, such as Teflon fabrication, valve diaphragms, pump diaphragms, seals, and rubber bonding. These products serve vital roles in industries including chemical processing, ultra-pure semiconductor manufacturing, medical and biomedical applications, and water purification processes. Besides its product line, it offers a comprehensive suite of services, including design assistance, prototyping, testing, and material selection.
Kelco Industries, founded in 1905 and based in Woodstock, Illinois, USA, is a manufacturer and supplier of custom components for industrial equipment and unique assembly challenges. Its offerings include electromechanical components, seals and sealing elements, and flexible metal solutions. Some of its products are flight control grips, solenoids, and injection molded plastic components. The company maintains strict standards and is certified as being in conformance with NSF-ISR ISO1 14001:2015, and NSF-ISR AS9100D with ISO9001:2015 certifications.
KLINGER IGI is a manufacturer located in Wilsonville, Oregon, founded in 1886, offering precision material conversion capabilities. They specialize in fabricating thermal interfaces, EMI/RFI shields, gaskets, and various components for industries like aviation, aerospace, medical devices, power generation, and defense. Serving original equipment manufacturers, their products cater to highly regulated sectors such as scientific instruments and alternative energy. KLINGER IGI is an AS 9100, ISO 9001, and ITAR registered material conversion specialist.
Gasket Express, established in Worcester, Massachusetts is a manufacturer of Die Cutting, Gasket Material, and Machined plastic products. The company's product portfolio includes sheet and roll gasket material, vulcanized o-rings, molded rubber products, fabricated gaskets and plastic die cutting. Their products are used in industries such as Electronics and Telecommunications, Automotive, Transportation and aerospace and Defense. The company also provides services including national distribution, product selection, customized services, technical support and customer service.
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
Ergoseal, Inc., established in 1989 and headquartered in Carol Stream, Illinois, USA, is a manufacturer providing sealing solutions. Their product range includes mechanical seals, lip seals, non-contacting seals, magnetic seals, and custom rubber products, serving an array of industries, including pump, compressor, blower, and rotating equipment production sectors. These seals ensure the containment of fluids, enhancing the efficiency and safety of the equipment they are used in. Ergoseal is ISO 9001:2015 certified and a member of the Fluid Sealing Association.
Lusida Rubber Products, Inc. was founded in 2000 and is based in Rosemead, United States, is a manufacturer of plastic and rubber products that have applications in the Construction, Automotive, Food Processing, HVAC, and appliance industries. The company produces conveyor belts, diaphragms, extruded seals, fabric-reinforced hoses, and, molded products, as well as ring gaskets, seals, rubber sheets, silicone heater hoses, and timing belts that are used in Furniture manufacturing, Electronics, Metal fabrication, and, Aerospace arenas. They offer molding, extrusion, rubber-to-metal bonding, engineering, and prototyping services that find uses in research institutes, the medical sector, and, the computer-accessory manufacturing industry.
Pure Rubber Products Co., established in Rockaway, NJ in 1935, is a manufacturer of Precision Molded Parts custom rubber parts in Natural & Synthetic. Their product portfolio includes Pump components such as diaphragms, valves, and gaskets, Packaging cups & caps, Switches, Dampers and Odd-shaped O-rings. The company serves industries, including automotive, aerospace, electronics, medical devices, consumer goods, and industrial equipment. They also provide services including product selection, installation, preventative maintenance, troubleshooting, and repair.
Atlantic Rubber Company, Inc. is headquartered in Littleton, Massachusetts. The ISO 9001-certified company is a manufacturer of precision rubber and plastic products, serving the industrial, military, pharmaceutical, and commercial markets with application design, advanced manufacturing procedures, and quality control. The company manufactures with most available plastic and rubber compounds including Latex, PVC, Nylon, pure gum, and EPDM. The company’s product line includes rubber tubing, standard and custom rubber O-rings, lab products, rubber grommets, and molded rubber products.
Economy Die & Gasket, Inc. (EDG) is an American manufacturer of custom die-cut gaskets and parts that was established in Baltimore, Maryland in 1948. The company primarily produces various die-cut parts such as thermal batteries, washers, spacers, and gaskets, as well as steel rule dies for die-cutting applications (e.g. corrugated boxes or packaging). These are used by client manufacturers and OEMs in a broad range of industries, including in the appliance, automotive and HVAC sectors. EDG also offers CAD product design and planning services, as well as quality control and inspection for customer projects with unique applications.
Aero Rubber Company began in 1973 and is a family-run business based in Tinley Park, Illinois. Aero Rubbery Company is a custom manufacturer of rubber components such as tubing, sheeting, seals, and gaskets. Aero also offers fabrication services including die cutting, water-jet and lathe cutting, slitting, and vulcanized splicing. Aero Rubber is an ISO 9001:2015 certified company. Aero Rubber manufacturers use materials such as Viton, Neoprene, EPDM, silicone, and rubber materials. Aero Rubber manufacturing includes molded parts such as gaskets, extruded parts, sheeting, fabricated parts, and mandrel-made parts. Value-added capabilities are also offered.
Phelps Industrial Products LLC is based in Laurel, Maryland. The company is a manufacturer and fabricator of custom products for domestic and global customers from industries such as oil & gas, shipbuilding, petrochemicals, utilities, and water treatment. The company’s primary product lines revolve around standard and custom gaskets, O-rings, marine products, mechanical seals, and additional products. The company provides expansive online resources and support to assist customers in both product selection and correct product usage.
NEDC Sealing Solutions, founded in 1982 in Haverhill, Massachusetts, is a global manufacturer of gaskets, preforms, absorbers, thermal pads, and EMI/RFI gaskets. NEDC started in 1982 in a space similar to the size of a garage in a brick building located on River Street in Haverhill, MA. It has evolved from a garage with a few manual die-cutting machines to a 70,000-square-foot facility that provides solutions for military, medical, aerospace, and consumer markets. NEDC is an ITAR-registered, AS-9100D certified, and ISO 9001:2008 certified company.
APM HEXEAL, founded in 1947 by Riva Solins Morse and Milton Morse is based in New Jersey, USA, as a designer and manufacturer of sealing products for commercial and industrial applications. The company offers a wide range of products, including sealing boots and bushings, toggle boots, and pushbuttons that are used by companies to tighten components together to prevent essential fluids from escaping. These sealing products are used in various industries such as aerospace, automotive, marine, robotics, and more.
Gaskets, Inc., established in 1961, and located in Rio, Wisconsin, is a manufacturer and supplier that specializes in providing gaskets and sealing solutions. Their product range includes custom gaskets, O-rings, and fabricating seals made from high temperature textiles, as well as expansion joints and other heat resistant materials for various industries such as automotive, aerospace, manufacturing, and petrochemicals, ensuring leak-proof and secure sealing, preventing fluid or gas leakage in critical applications.
Ames Rubber Manufacturing was established in 1954 and is headquartered in Los Angeles, California. The company is a full-service domestic manufacturer of custom rubber products with production facilities in Southern California and Southeastern Tennessee. The company primarily serves the aerospace, agriculture, furniture, and power transmission industries. The company provides a range of standard and custom. Products in large and small quantities include O-rings, grommets, bellows, and seals. The company provides custom services including assistance in product development and material selection, component life extension, and tooling options.
Minnesota Rubber & Plastics was founded in 1946 and is headquartered in Minneapolis, Minnesota as a subsidiary of Trelleborg Group. The company is a designer and manufacturer of rubber and plastic components for medical devices, water, food, & beverage, specialty industrial, infrastructure, and automotive markets. The company’s core solutions include custom and standard parts. Standard parts include assemblies, inflatable and compression seals and gaskets, and Pawling Engineered Products. Custom parts include custom molded rubber, LSR injection molding, and molded plastics.
Mercer Gasket & Shim, Inc. established in Bellmawr, New Jersey in 1919 is a manufacturer of gaskets and expansion joints. that are used in refining industries. Their product portfolio includes Metallic Gaskets, Jacketed Gaskets, Kammprofile Gaskets, Spiral Wound Gaskets, and non-Metallic Gaskets. The company has 7,000 square foot facility with 25 employees and has ISO 9001-2015 certification. They also provide cutting machines, including Knives, Laser, Waterjet, and Die cutting that can cut any material from thin plastic to thick steel. The company has a national distribution network and a customer support center.
Wisconsin Oven Corporation has operated since 1973 and is located in East Troy, Wisconsin. Wisconsin Oven designs, engineers, and manufactures industrial ovens and other heating equipment for numerous applications including heat treating, powder coating, paper pulp drying, finishing, drying, and curing in the aerospace, automotive, composite, energy, finishing, foundry, heat treating, annealing, military, and pharmaceutical industries. Types of ovens and equipment include custom and standard batch ovens, conveyor ovens, pollution control equipment, and walk-in ovens.
Tricomp, Inc. is a manufacturer providing sealing and gasketing solutions, headquartered in Pompton Plains, New Jersey. Their product range includes weather strippings, shower door magnetic strips, and flexible magnetic strips. These products are designed to create a tight seal, preventing leaks, providing insulation, and protection against environmental factors such as moisture, dust, and noise. They also offer double bulb seals and options with or without pressure-sensitive adhesive. Tricomp, Inc. uses NSF, FDA, and UL approved materials, guaranteeing compliance with industry standards.
Allstates Rubber was founded in 1968 and has operated in the Chicagoland area as a family-run business. The company manufactures, designs, and offers custom solutions for rubber machined parts for customers in the United States as well as overseas. The company offers specific custom capabilities including molding, rubber extrusions, rubber fabrication, and thermoplastic extrusions. The company offers both civilian and military-grade products, tools, and accessories. Standard product lines include rubber balls, bumpers, grommets, and suction cups.
ACE Seal was founded in 1982 and is headquartered in San Jose, California. The company serves industries including aerospace, biotech, semiconductor, medical, and solar with custom rubber products, seal accessories, and other sealing components using a variety of elastomers. The company offers standard and custom products. The company offers four product categories of standard products: O-ring products, O-ring materials, gaskets, and barrel bungs. Custom products include custom O-rings, rubber components and extrusions, plastic components, and customized accessories. Custom molding services such as compression molding, injection molding, and multi-cavity molding are also available.
Southern Rubber Co. Inc. was chartered in 1925 and is headquartered in Greensboro, North Carolina. The company is an ISO 9001:2015 certified manufacturer and fabricator of rubber-based products. The company’s product segments include gaskets, extrusions, industrial hoses & tubing, adhesives, and O-rings & seals. The company provides both stock and custom offerings compatible with military and various commercial standard requirements. The company also produces prototypes of various components from customer drawings.
ElastoSeal, Inc., founded in Lexington, KY in 1989 is a manufacturer of elastomer products such as o-rings, gaskets, and washers. The company's product portfolio includes Elastosis can provide extruded profiles to exacting specifications, custom molded parts such as ring, washer or bushing, and A rubber bushing that is used for separating the faces of two metal objects while allowing a certain amount of movement. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation.
Century Rubber was founded in 1973 and is headquartered in Bakersfield, California. The company is a manufacturer of precision custom elastomer components such as rubber seals & die cut gaskets for aerospace, defense, electronics, medical, and other industries. The company’s fabrication methods include homogeneous molding, die cutting, rubber-to-metal and rubber-to-plastic vulcanizing. The company is ISO 9001 and AS9100D certified and works with such materials as silicone, ferrosilicon, Neoprene, Nitrile, and millable urethanes.
Vanguard Products Corporation is headquartered in Danbury Connecticut. The company is an ISO 9001:2015 certified full-service manufacturing and engineering company providing the industry with precision elastomeric fabricated goods, producing all custom and standard goods in the United States. The company offers custom rubber and silicone products, as well as standard products including food-grade silicone tubing, rubber tubing, and fabricated EMI and RFI shielding products. The company also offers a materials configurator for customers to design with their own materials based on preference for qualities and resistance to various elements.
Precision Associates, Inc., founded in 1955 and based in Minneapolis, Minnesota, is a manufacturer of custom rubber seals, molded rubber parts, and rubber o-rings. Some of the products that the company offers are standard and metric o-rings, quad rings, backup rings, oil seals, gaskets, and custom molded rubber parts. These products are used for sealing, cushioning, vibration damping, and noise reduction in various devices and systems. The company has ISO 9001:2015 and ISO 13485:2016 certifications, which show its adherence to quality standards and customer requirements.
Exactseal, founded in 2016 and based in Indianapolis, Indiana, is a manufacturer and supplier of rubber products for the industrial market. Its products include extruded, molded rubber Seals, die-cut, Gaskets, o-rings, tubing and protection products. Its tubing and sealing products are created from Silicone, Sponge, Cellular Foam and more. Exactseal offers designing, warehousing, inspections, quality management and shipping to its customers. Exactseal serves its customers in aerospace, agriculture, telecommunication and building and construction industries.
Potter Associates, Inc. was founded in 1964 and is based in Rochester, New York. Potter Associates is a manufacturer and distributor industrial materials, tools, and machinery. Manufacturing capabilities include V packaging sets, O-rings, gaskets, sheet material, rubber extrusions & sheet material, heat exchangers, compression braided packing, non-asbestos brake linings, urethane molding, and PTFE machining. Other product offerings include valve packing, pulp and paper packing, soot blower sets, copper packing, metallic packing, and wastewater treatment packing.
Bearings Industrial Supply Company, Inc (BIS) was founded in 1982 in Addison, Illinois. The company is a supplier and distributor of bearings, seals, belts, power transmission parts, and a variety of other industrial supplies to small and large customers such as Boeing and Toyota. The company isources from manufactureres such as Emerson, KOYO, Tsubaki, NTN, and Timken. The company's offerings include numerous types of bearings, many varieties of seals, several different belts, AC and DC motors, and power transmission components.
Web Seal Inc. was founded in 1960 and is headquartered in Rochester, New York. Web Seal is a manufacturer and distributor of custom sealing solutions for business and industries including agricultural equipment, electronics & lighting, filtration, food processing, life sciences, pumps, waster & wastewater treatment, and government contracting. Web Seal’s product lines include custom gaskets & die cuts, O-rings & backup rings, hydraulic & pneumatic seals, custom molded seals, EMI & RFI shielding, thermal management, and related sealing products. Custom services include color coding, kitting and assembly, supply chain management, and custom packaging.
Sealing Devices Inc., founded in 1963, is a veteran-owned manufacturer, fabricator, and distributor of Seals and Gaskets based in Lancaster, NY, USA. The company offers a comprehensive range of sealing solutions, including O-Rings, gaskets, EMI shielding, thermal interface materials, custom molded rubber parts, protective vents, tapes, adhesives, and sealants for various sealing applications. With over 200 manufacturing equipment pieces, Sealing Devices is certified to AS9100D and ISO 9001:2015 standards. They have a wide presence with six offices across the country and serve industries such as transportation, aerospace, military, electronics, communications, and general industrial.
Ipotec is a distributor and fabricator based in Seabrook, New Hampshire, specializing in high-performance elastomeric materials and components. The company collaborates with select manufacturers to tailor products for various industries. Their product portfolio includes silicone rubber-based technologies for sealing, fluid transport, insulation, and other applications in industries such as manufacturing, automotive, electronics and more. Ipotech uses an ANAB-approved and UKAS-accredited management system and offers personalized customer service including custom packaging and labeling.
Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.
Allied Metrics was founded in the 1990s and is headquartered in Naples, Florida. The ISO 9001:2015-certified company is a full-service manufacturer and distributor of hydraulic seals, oil seals, and pneumatic seals. The company’s product offerings include O-rings, seals, V-rings & V-ring seals, X-rings & square rings, and wear bands & guide rings. The company’s service offerings include on-demand delivery with short cycle times, custom-designing to customer specifications, prototype parts, and emergency repairs.
Total Refrigeration Gaskets, Inc., founded in 1989, is a manufacturer and distributor of gaskets, walk-in and reach-in hardware, including mechanical locks, pull handles, hinges, and miscellaneous items such as door closers, flat breaker strips, sliding door hardware, and cooler tapes used in the construction, manufacturing, processing, home appliances, and industrial industries. The Apopka, Florida-based company provides Total Tags for task organization, customized toolboxes & labeling, gasket sample kits to save time and avoid mistakes, and Customer logs to organize work.
RubberMill was founded in 1987 and is headquartered in Liberty, North Carolina. The ISO 9001:2015 certified company is a manufacturer and distributor of rubber, plastic, ceramic, and other non-metallic materials used in automotive, manufacturing, and other industries. The company offers standard gaskets, seals, insulation parts, and molded rubber parts and custom manufacturing of molded rubber parts according to customer drawings from materials including Nitrile, silicone, natural rubber, and urethane. The company also provides contract and lamination services and in-house cuttings of non-metallic and flexible materials.
Metraflex Company was founded in 1958 and is based in Chicago, Illinois. Metraflex is a distributor of piping specialty products to the commercial HVAC industry among others. These are used in vibration isolation, noise dampening, protection against thermal expansion and contraction, pipe alignment, seismic movements, pump connections, and flow conditioning. Metraflex Product categories include metal expansion joints, rubber expansion joints, Metraloop, seismic breakaway hangers, energy saving pump connectors, flexible metal hoses, flexible couplings, valves, compensators, strainers, air vents, pipe guides, anchors, wall penetration seals, and fittings.
US Rubber Supply Company is headquartered in Brooklyn, New York. The company is a manufacturer and stocking distributor of standard and custom rubber goods and other services for OEM, military, and various commercial industries. The company’s product lineup includes bumpers & fenders, expansion joints, hose & fittings, snow plow blades, and window products. The company offers complete die-cutting and molding extruding services and offers custom fabrication capabilities to customer specifications. Just-in-time delivery on all rubber goods is also available.
Custom Gasket Manufacturing is based in Englewood Cliffs, New Jersey. Custom Gasket serves several industries such as power generation, lighting, transportation, water & air filtration, food processing, pump & valve, electronics, cryogenic equipment, oil & gas, construction, agriculture, pharmaceutical, pulp & paper, HVAC, as well as others including OEMs. Custom Gasket Manufacturing produces many types of custom products including rubber elbows, rubber diaphragms, insulators, seals, extrusions, and as per their namesake, gaskets. Custom Gasket also offers rubber extrusion, die cutting, rubber molding, water jet cutting, laser cutting, and flash cutting services.
Jefferson Rubber Works, Inc. was founded in 1979 in Worcester, Massachusetts. The company is a producer of custom rubber products in a wide variety of markets including the medical, liquid injection molding, construction, hydronics, and automotive markets. The company’s rubber molding capabilities include rubber injection and compression molding, liquid injection molding, transfer molding, and composite molding with prototyping services available. The company’s products include rubber molded parts including grommets, EMI shielding, hoses, vibration isolators, and gaskets. Custom molded rubber components are also available.
Accurate Products was founded in 1958 and is headquartered in Chicago, Illinois. The company manufactures and distributes rubber products for the agricultural, manufacturing, and automotive industries. Its die-cutting operation in Chicago provides custom die and rubber molding services for Neoprene, EPDM, silicone rubber, as well as plastic injection molding. The company’s standard products are divided into molded rubber parts and injection molding. Molded rubber parts include SBR, Bun-N, natural rubber, and other parts and products. Injection molding parts include button bumpers, grommets, extrusions, and leg tips.
Technical Specialties Company, Inc. (TSC) has been a supplier of die-cut, extruded, and molded parts since 1949. Their team consists of decades of experience led by President and CEO Donald Schutz, who has been with the company since 1996. The company’s plant managers, partners, and vendors have an average tenure of 20+ years in the industry. As a full-service provider of non-metallic components, they specialize in custom fabricating, extruding, molding, and die-cutting plastic and rubber parts. Their technology is applied across a broad spectrum of industries and applications.
MSP Seals Inc. was founded in 1998 and is headquartered in Indianapolis, Indiana. The ISO 9001:2015 and ISO 14001:2015 certified company is a supplier that serves industries including automotive, aerospace, agricultural, pharmaceutical, and food & beverage industries with seals such as O-rings and X-rings used in both OEM and MRO applications. The company’s other sea products include rotary & shaft seals, hydraulic & pneumatic seals, and seal kits. The company designs custom hoses & fittings and engineered & molded seals using materials including PURE PTFE or PTFE loaded with carbon, bronze, or other fillers.
Henning Gasket of Chicago, Illinois, has a 100 year history of serving industries including agriculture, power generation, transportation, construction, electronics, pharmaceutical, and food processing as a distributor for gasket materials, seal materials, gaskets, seals, and related tools. Hennig Gasket also offers gasket manufacturing, of over 30 varieties including roll and sheet gasket material, and cutting services. Custom gasket manufacturing includes many types such as paper gaskets, ceramic fiber gaskets, pipe seals, flame resistant, neoprene gaskets, and chiller gaskets.
Sealing Specialties, Inc. established in Souderton, Pennsylvania in 1985 is a distributor of seal components that are used in automotive, chemical, communication, energy, food & beverage/ Their product range includes O-Rings, Mechanical Seals Engineered Seals, Gore Sealant Products and Perfluoroelastomers. The company has a global distribution network and provides customer service. Their products are also used in industries such as instrumentation & controls, life sciences, medical, pharmaceutical, pulp & paper, and semiconductors.
Pacific States Felt & Mfg. Co., Inc., established in 1920, is a supplier of standard and custom sealing devices and industrial products such as gaskets, washers & pads, seals, O-rings, and molded bumpers made from felt, cork, rubber, fibre, and plastic. The products are used in decorative, lighting, medical, utility, and sciences industries. The Hayward, CA-based company has die cutting, tape slitting & adhesives, laminating & fabricating, extrusion, and rubber molding capabilities. The company has projects such as assembling silicone sponge housing gaskets for the lighting sector.
Arizona Sealing Devices, Inc. is a sealing products distributor located in Chandler, Arizona that was established in 1989. The company began as an O-ring supplier but has since expanded its product range to caps, plugs, gaskets, and customized and prepackaged kits. The products are available in a variety of materials, such as various kinds of rubber, plastic, and silicone. The company services a range of industries, including automotive, aviation, electronics, medical, and industrial.
The Rubber Company, established in 2013 and headquartered in Romsey, Hampshire, is a British manufacturer and supplier of rubber products. Some of the company’s products are rubber and polyvinyl chloride (PVC) extrusions used for sealing, noise control, vibration control, and decorative trim. Product variants include seals and extruded rubber profiles, flame retardant neoprene and silicone, conductive extrusions and coatings, as well as miniature profiles. These products find applications in various industries such as automotive, construction, engineering, marine, and lighting. Additionally, The Rubber Company offers specialist products like anti-slip flooring and mats used in agricultural, commercial, gym, residential, and leisure settings.
TAMIYA, INC., established in 1984 and headquartered in Shizuoka, Japan, is a manufacturer of hobby products like plastic model kits and educational construction kits. The company started with making educational wooden models in its sawmill, and eventually developed as a specialized wooden and plastic model kit manufacturer. It offers various motored automobile kits and educational kits such as construction, solar and robotics kits for kids, remote control cars, scale models, structural parts as well as various tools, paints and finishing materials. The company has local retailers and agents in most countries to supply its products, whose can be found on the website.
Ridderflex & Plastics B.V., started in 1992 and located in Ridderkerk, The Netherlands, is a manufacturer of rubber, plastic, and polyurethane custom-made products. The company specializes in crafting rubber gaskets, rubber sleeves, plastic slide plates, bush bearings, and sleeve bearings. It also produces polyurethane bearing pads, flange gaskets, rubber profiles, and valve parts. Its gaskets can be produced in any desired type of rubber gasket material: in a food grade or in a grade that is resistant to seawater or chemicals.
Alanto Ltd. was established in Walsall, UK, and is a manufacturer of foam and rubber products for body armor, domestic appliances, electrical and lighting, heating, and ventilation Industries. The company uses raw materials such as neoprene, polyethylene foam, solid rubber, and silicone to make the following products: rubber coils, rubber gaskets, foam tapes, foam rolls, and rubber seals. The applications of the equipment include safeguarding machines from dust and water and combating operatives.
Hangzhou Bright Rubber Plastic Product Co. Ltd., established in 2004 and headquartered in Zhejiang, China, is a manufacturer of rubber and plastic parts. The company's products include molded rubber parts, silicone and silicone sponge extrusions, and injection plastic parts. Its rubber materials include silicone, polyacrylate, and ethylene; plastic materials include PP, PA, and TPU. Its rubber extrusion parts serve the construction sector, and plastic extrusion parts support the manufacturing industry with customized profiles for structural and protective applications. The company's products find applications in the agriculture, food, and health sectors and serve the electronics, vehicle, and household appliance industries.
Zhejiang Jiacheng New Material Co., Ltd., founded in 1994 and based in Province, is a manufacturer of professional rubber seal products and provides seal technology application solutions. The company specialised in producing O rings, ED rings, rubber gaskets, rubber cords, and other standard seal products, as well as customised products. It also has expertise in the application, development, and marketing of raw materials. The company has passed the ISO9001 quality system and the IATF16949 Automotive Industry Management System certification. It includes professional experimental facilities and more than 100 advanced production and checkout equipment.
Tianjin SWKS Technology & Development Co., Ltd, established in 2016 and headquartered in Tianjin, China, is a manufacturer that specializes in designing and developing rubber products. The company offers a wide range of products, including O-rings, radial shaft seals, oil seals, and hydraulic seals. It also offers rod seals, rubber-to-metal bonded parts, reinforced fabric seals, and rubber shock absorbers. Its product creates a barrier that prevents the ingress of moisture, dirt, and other contaminants. The company has achieved ISO 9001:2015 and ISO/TS 16949:2009 certification. It serves a diverse range of industries, including automotive, machinery, petroleum, chemical, and more.
KJ Laser Micromachining, founded in 2001 and located in Toronto, Canada, is a manufacturer of advertising and promotional products. They offer precision laser micromachining services, including laser cutting and engraving for various materials like metals, plastics, and composites. This enables the precise and efficient creation of complex shapes, patterns, and permanent markings such as logos and serial numbers. Their product portfolio includes laser cut custom Gauge, ornaments cut from steel, laser engraved acrylic, and stainless steel medical implants.
Air Water Mach Inc., established in 1962 and headquartered in Matsumoto, Nagano, Japan, is a manufacturer of sealing materials and industrial plastic products. Its product line includes O-rings, cylinder packings, precision rubber products, oil seals, and gaskets, serving diverse industries such as pharmaceuticals, food, machinery, petrochemicals, and semiconductors. The company also maintains factories in Dalian, China, and holds ISO 9001:2000 and ISO 14001:2004 certifications for its adherence to quality and environmental standards.
PAR is a company founded in the year 1985, based in Devon, United Kingdom as a manufacturer and supplier of plastic, insulation, and rubber products. Their product portfolio includes rubber and polyurethane products, sealing and jointing applications, engineering plastics, high-temperature insulation, health and safety products, hose and ducting products, hose couplings, and clamps, with general consumables. The products are used in multiple industries which include food, drink, pharmaceutical, water treatment, chemical, brewing, mining, aerospace, brick manufacture, packaging, textiles, and distribution.
AMP Custom Rubber, Inc., founded in 1987, is a manufacturer and fabricator of nonmetallic materials such as neoprene, Teflon, Viton silicon, rubber, and Armstrong to create products such as washers, spliced & 0-rings, expansion joints, and bumpers used in the electrical, filtration, construction, material handling, and military industries. The Hazlet, NJ company deals in specialized gasket manufacture, including flange gaskets, rubber gaskets with a wide temperature range, and chemical and pressure-sensitive adhesive applications.
Quick Cut Gasket & Rubber Corporation (QGR) is an American manufacturer of various rubber products that was established in Lancaster, New York in 1974. The company produces o-rings fabricated from a range of rubber materials such as nitrile, silicone, or neoprene, as well as gaskets fabricated from various materials (e.g. cork, felt). It also offers rubber profiles, extrusions, and custom handmade products including grommets, anti-vibration pads, and bumpers. QGR products are primarily used in the medical, chemical processing, automotive, and marine industries.
Device Technologies, Inc. was founded in 1984 and is based in Southborough, Massachusetts. The company is an ISO 9001:2008 and AS9100-certified manufacturer and designer of specialty protection devices serving industries such as aerospace, automotive, medical, rail, and others. The company’s 4 product segments are Wire Protection Grommet Edging, High Performance Enclosures and Doors Seals, Edge Trim, and Cable Management. Each of these product segments has product lines within them and each product can be custom designed and manufactured in collaboration with custom designs and preferences.
Micro-Tronics, Inc., founded in Tempe, Arizona in 1968, is a manufacturer of mechanical assemblies, cloth reinforced diaphragms, solid rubber parts, and complex machined components. The company's product portfolio includes gearboxes, motors, shafts, bearings, and pulleys. Their products are used in industries such as Electronics and Telecommunications, Automotive, Transportation and aerospace and Defense. The company also provides services including national distribution, product selection, customized services, after sales service, technical support and customer service.
Redwood Plastics and Rubber, since 1971, has been a manufacturer of dependable rubber, plastic, and composite components to increase production, reduce downtime, and improve safety. Sprockets, truck liners, outrigger pads, urethane coatings, and gaskets for the agricultural & farming, material handling, transportation & automotive, mining, and retail industries are among the products made from nylon, Tuffkast, acrylic, polycarbonate, and polyethylene. The Canadian company provides cut-to-size, bespoke design & tooling, fabrication, molding, 3D printing services, and unequaled polyurethane production capabilities.
Fabri-Tech Components, Inc., established in 1993, is a manufacturer and supplier of custom assemblies for industrial, medical, automotive, telecom, and electronic devices. The company manufactures a vast range of products like EMI gaskets, protective films, thermal management systems, and more. They have a team that offers personalized service to create tailored solutions without exorbitant prices. They are ISO 9001:2015 and ISO 13485:2016 certified. With a global network of facilities, in Singapore, the USA, China, Vietnam, Thailand, and Taiwan, they have customers on a global scale.
National Plastics and Seals was founded in 1985 and headquartered in Schaumburg, Illinois. The company is an ISO 9001:2015 certified manufacturer and supplier of precision machined & fabricated plastic parts to global customers in industries as diverse as aerospace, heavy equipment, point of purchase, semiconductors, and water treatment. The company works with a variety of materials such as acrylic, acetal, polycarbonate, Teflon, and PET. The company’s primary products include heat shrink tubing, insulation sleeving, rubber O-rings, and plastic resin. The company can make custom materials to specifications even to military-grade standards.
Iwata Mfg. Co., Ltd., established in 1966 and headquartered in Gifu, Japan, is a manufacturer of commercial machinery components and power transmission equipment. The company offers a wide range of products, including bearing rollers, end plates, leveling systems, nameplates, and seals. It also provides set collars, shims, sensor brackets, and trims. Its product requires less maintenance than oil-injected air compressors because it doesn't require oil changes or filter replacements. It serves a diverse range of industries, including coating applications, refinishing applications, manufacturing, and vacuum pumps.
Hebei Shida Seal Group Co. Ltd. was founded in 1983 and is headquartered in Hebei, China, and is a manufacturer and supplier of EPDM rubber seals and rubber extrusion products for various industries. The company's product chart consists of rubber seals, push-on edge trim seals, sealing profiles, self-adhesive sponge rubber extrusions, and, self-gripping gaskets that are required in the automotive, heavy truck, machinery manufacturing, and marine industries. The company also provides plastic vinyl edge trims, door and window seals, and rubber molded parts that have applications in the building and construction sector, shipping industry, and the rail and mass transit industry.
PTI Global Products Co., Ltd, founded in March, 2014, is a Thailand-based manufacturer and distributor of rubber seal profiles and plastic extrusion products. The company provides a wide range of rubber products including silicone rubber hose, incubator rubber seal, glass-edge rubber seal, vacuum rubber seal, light cabinet seal, and more. It also provides design, production, and consulting services for the manufacture of various rubber products. The company's rubber seals and plastic seal products are widely used both in the local and overseas markets in industries such as automotive, electronics, building and construction, power utility, and food and beverage processing.
Shur-Co, established in 1954 and based in Yankton, South Dakota, USA, is a manufacturer and supplier of tarp and containment systems. The company's product range includes solutions for agriculture, construction, flatbed, rail, and waste. These products play crucial roles in covering and protecting commodities and loads across various transportation methods, ensuring safety and cleanliness. Industries that rely on the company's offerings include truck transportation, agriculture, construction, and rail transport. Besides, the company offers services such as extensive research and development, customized solutions based on industry needs, and customer support.
Howden Joinery Ltd, founded in 1995 and headquartered in London, UK, is a manufacturer and supplier of kitchens and joinery products. The company sells hardware, bathroom cabinetry, and kitchen materials like sinks, floorings, taps, etc. It also offers services such as planning and a free home survey. All products of the company hold the FSC chain of custody certification. The company was voted in the Top 25 Big Companies to work for by the Sunday Times in 2020. It also holds a Royal Warrant by Appointment to Her Majesty the Queen to supply goods and services to Royal Households.
WD-40 Company, established in 1995 and based in Budd Lake, NJ, USA, is a manufacturer and supplier of 3-IN-ONE maintenance solutions. The company's product range includes RVcare slide-out silicone lube, RVcare window & track dry lube, RVcare rubber seal conditioner, trailer hitch gel lube, and garage door lube. These products aid in home and equipment maintenance, lubrication, and rust prevention. The company serves home users, professionals, RV enthusiasts, and equipment operators. The company also offers user-friendly maintenance solutions.
Bison International BV, founded in 1966, in Kloetinge, Zeeland, The Netherlands, is a manufacturer and distributor of cleaners and sealants that provide adhesives. The company’s product portfolio includes glue tools, parquet adhesives, epoxy repair products and polyurethane wood adhesives. It markets its products to construction and building contractors as well as private individuals. The Company is ISO 9001:2015, ISO 45001:2018 and ISO 14001:2015 certified. It aims to improve its products and offer solutions in order to meet the needs of customers and end-users as well as of future generations.
Nok Corporation, founded in 1941 and based in Tokyo, Japan, is a manufacturer of several products, including sealing, rubber, and electronic products, and is part of the NOK Group. The company also makes flexible printed circuits (FPC), office automation equipment, and functional membranes, serving industries such as automobile, construction machinery, and electronic equipment. In 1960, the company expanded its production by constructing plants in Kumamoto, Fujisawa, and Shizuoka, and it was listed on the Tokyo Stock Exchange in 1961. In 1979, it was the first to set up a production base in the US before any Japanese automaker.
Cupps Industrial Supply, Inc. is a manufacturer and distributor of "Industrial Sealing Solutions and Components," founded in 1976. Some of the products offered include gaskets, oil seals, insulators, belts, and hoses. These products are used in industries such as military, aerospace, power generation, mining, and hydraulics. The company provides sealing and other industrial solutions to markets ranging from defense, aerospace, power generation, mining, and wastewater treatment. Its quality department is ISO 9001: / AS9100 certified and meets MIL-SPEC 45208A requirements.
Saddle Brook Controls is a division of Ribble Engineering, which was founded in 1933 in Saddle Brook, New Jersey. Saddle Brook Controls is a manufacture as well as a designer, distributor, and support service provider of automation solutions for factory automation. Product groups include PLCs, controllers, Remote IO devices, HMIs, industrial computers, machine vision and inspection machines, motion devices, drives, motor controls, enclosures, circuit breakers, safety products, sensing and control products, power supplies, and UPS.
MiMotion was founded in 1946 in Birmingham, Alabama and today operates under Genuine Parts Company. The company operates as a distributor and supplier of custom parts for both maintenance repair and operating replacement part market and the OEM market. The company’s product line includes many types of products including abrasives, chemicals & lubricants, hand & power tools, hose & fittings, and process pumps & equipment. The company also provides maintenance repair and operating replacement parts as well as OEM parts ensuring compatibility with existing customer operations.
Ultrafab, Inc, a company founded in 1970 and based in Farmington, New York, is a manufacturer and supplier specializing in weatherstripping products. The company's range of products includes adhesive backed weather seals, polypropylene leaf seals, and specialty brushes. These products find application in various sectors, including OEMs (Original Equipment Manufacturers), fabricators, and the window and door industry. The company offers technical support to its customers while being ISO 9001:2015 certified for its quality management. Some of the company's partners include Lincoln Sentry, Collins Toker Agencies, and Central Plastics.
Girard Rubber Corporation began as a purchasing agent for France under the Marshall Plan at the end of the Second World War and soon after as an export partner for Japanese companies to the United States. The company is ISO 9001 registered and headquartered in Elmsford, New York. The company offers a wide range of manufacturing capabilities including gaskets, seals, shock mounts, disks, and pads. The company uses Cam Pro/ENGINEER software to create blueprints followed by custom designing with CAD. The company also offers die-cutting, prototyping, and engineering support.
DMS SEALS TECHNOLOGY CO.,LIMITE, founded in China in 2008, is a supplier of O Ring and Hydraulic Seals. The company offers O-Rings in various materials, sizes, and configurations and hydraulic seals including piston seals, rod seals, wipers, and wear rings used for optimal performance in hydraulic systems, ensuring leak-free and efficient operation. It serves a diverse range of industries, including but not limited to automotive, aerospace, industrial manufacturing, hydraulics, and more.
Tri-State Bearing Company was founded in 1950 and is headquartered in Evansville, Indiana. The company is an independently owned and operated distributor of a full line of bearings, mechanical power transmission, and motion control products to customers across North America in the agricultural, automotive, manufacturing, and pharmaceutical industries. The company has several product lines such as chains & sprockets, clutches & breaks, and couplings in addition to its namesake of bearings. The company also offers services such as custom-length modifications of certain components such as roller chains, electronic repair of drivers and controllers, and on-site gearbox assembly.
AB Industrial Equipment Company (AB Industrial) is headquartered in West Chester, Pennsylvania. AB Industrial distributes and services pumps, seals, and related products. Pump categories include varieties such as centrifugal, vertical, slurry, mag-drive, sanitary, and positive displacement pumps. Seals offerings include component seals, cartridge seals, face materials, elastomers, as well as electric motors. Strainers and valves include basket strainers, auto-cleaning, non-metallic, plug valves, relief valves, and triple duty valves among other offering categories.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Mac Divitt Rubber Co., LLC |
2.8%
|
| 2 | ENA - Advanced Rubber Technologies |
2.3%
|
| 3 | Accurate Rubber Corporation |
2.0%
|
| 4 | Standard Washer & Mat, Inc. |
2.0%
|
| 5 | Tempron Products Corporation |
2.0%
|
| 6 | Sealing Specialties, Inc. |
2.0%
|
| 7 | Kelco Industries |
1.8%
|
| 8 | Apple Rubber Products Inc. |
1.8%
|
| 9 | Bearings & Industrial Supply Co., Inc. |
1.8%
|
| 10 | Phelps Industrial Products, Inc. |
1.8%
|
Derivation Method
The ranking is calculated based on the click share within the rubber seal page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
63 | 73.3% |
|
China
|
6 | 7.0% |
|
United Kingdom
|
5 | 5.8% |
|
Japan
|
2 | 2.3% |
Malaysia
|
2 | 2.3% |
|
Netherlands
|
1 | 1.2% |
|
Canada
|
1 | 1.2% |
|
Thailand
|
1 | 1.2% |
| Boksburg | 1 | 1.2% |
| Czech | 1 | 1.2% |
Denmark
|
1 | 1.2% |
| Palestine | 1 | 1.2% |
South Africa
|
1 | 1.2% |
42 products found - Page 2
42 products - Page 2
M-O Tech Co., Ltd.
30+ people viewing
Last viewed: 26 minutes ago
We handle various high-pressure O-rings, mainly in sizes used as repair and maintenance parts for construction machinery and agricultural machinery...
