4 Roller Pump Manufacturers in 2024
This section provides an overview for roller pumps as well as their applications and principles. Also, please take a look at the list of 4 roller pump manufacturers and their company rankings. Here are the top-ranked roller pump companies as of November, 2024: 1.Westech Equipment, 2.Lead Fluid Technology Co., Ltd., 3.HAKKO Corporation.
Table of Contents
Categories Related to Roller Pumps
What Is a Roller Pump?
A roller pump consists of a special elastic and resilient tube and a roller with multiple protrusions. The roller rotates and pushes the tube with its protrusions, pushing the fluid inside the tube to transport the fluid. It is also called a tube pump or hose pump. Since the fluid is transported by volume change in the tube, it is classified as a positive displacement pump. They are suitable for transporting fluids that are difficult to transport with gear pumps, such as slurries.
Uses of Roller Pumps
Roller pumps are used in situations such as medical equipment, chemical plants, commodity plants, and for transporting petroleum products. They are used in situations where they can be used to convey fluids that contain high levels of impurities, such as slurries, and in situations where changing pumps can take advantage of the characteristics that guarantee hygiene. When selecting a roller pump, it is necessary to consider the transport volume, low pulsation, power consumption, sanitation, and whether the fluid is suitable for transport by the roller pump.
Examples of roller pumps in use are shown below.
- Conveying blood for dialysis
- Conveying petroleum products to tanks
- Conveying drinking water to plastic bottles
Principle of Roller Pumps
This section describes the operation of a roller pump. A roller pump consists of a tube, a roller, a motor to rotate the roller, a suction port, and an outlet. The tubing is elastic and resilient, and the rollers have dimensional protrusions that completely seal the tubing and allow it to rotate. Some products are equipped with valves on the inlet and outlet ports to adjust the flow rate.
During operation, the roller rotates, and its projections crush and move the tube. Fluid in the tube is pushed out and transported through the outlet. The inside of the tube, crushed and restored by the protrusions, is in a state of vacuum, and fluid is drawn into the tube by opening the valve. Since the protrusions deform the tube and transport the fluid as if pushing it out, the fluid does not easily clog inside the tube and can be transported stably.
List of 4 Roller Pump Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- China
- Japan
-
-
-
Westech Equipment
Roller pump
Manufacturer Overview
Westech Equipment was founded in 1971 in Salt Lake City, USA and is a manufacturer of tank pumps, oil equipment, self-service consoles and electric controls for fuel dispensers. Company provides a complete line of pumps and equipment for storing, pumping, mixing, measuring oil and industrial liquids. The pumps on the market are: for fuel flow, portable pumps, water pumps and fire pumps. There is also a wide selection of equipment: for aviation fuel, CNG, for trucks/tankers, for fuel oil delivery, portable for oil and gas fields etc. It is a member of the Continental 10-Group and is protected by SSL encryption.
-
-
-
-
-
HAKKO Corporation
Peristaltic (Roller) Pump
Manufacturer Overview
HAKKO Corporation, established in 1952 and has its headquarters in Osaka, Japan, is a manufacturer and distributor of soldering equipment and solutions. It offers a wide range of products including soldering stations, desoldering tools, and soldering pots. These products are used for various thermal control needs such as in electronics manufacturing, hobbies, and crafts. The company operated globally and holds both the ISO 9001 quality management and ISO 14001 enviornmental management certifications.
-
-
-
-
-
Lead Fluid Technology Co., Ltd.
Roller pump
Company Overview
Lead Fluid Technology Co., Ltd., established in October 1999, is a China-based manufacturer and supplier specializing in peristaltic pumps, syringe pumps, gear pumps and precise fluid transfer devices. The company’s product portfolio includes peristaltic pumps, syringe pumps and gear pumps. They also offer intelligent flow control system design, customization, and technical consulting services. Their products find applications in sectors such as agriculture, biotechnology, environmental protection, pharmaceuticals, and more. With ISO 9001:2008 quality system and CE certification, the company serves clients worldwide through a network of distributors in North America, Europe, Australia, Africa, and Asia.
-
-
-
-
-
TSUKASA ELECTRIC CO.,LTD
Tube pump
Company Overview
TSUKASA ELECTRIC CO.,LTD was founded in 1969 in Japan. Tsukasa primarily develops two types of components. First are motors, which are used in vending machines, ATM machines, and amusement machines. These also include gear motors, gear pumps, linear motion units, and rotary actuators. Secondly, Tsukasa develops tube pumps which are generally mounted to the aforementioned motors.
-
-
Roller Pump Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Westech Equipment |
32.0%
|
| 2 | Lead Fluid Technology Co., Ltd. |
32.0%
|
| 3 | HAKKO Corporation |
28.0%
|
| 4 | TSUKASA ELECTRIC CO.,LTD |
8.0%
|
Derivation Method
The ranking is calculated based on the click share within the roller pump page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- TSUKASA ELECTRIC CO.,LTD: 320
- HAKKO Corporation: 191
Newly Established Company
- Lead Fluid Technology Co., Ltd.: 1999 (25 years ago)
- Westech Equipment: 1971 (53 years ago)
- TSUKASA ELECTRIC CO.,LTD: 1969 (55 years ago)
Company with a History
- HAKKO Corporation: 1954 (70 years ago)
- TSUKASA ELECTRIC CO.,LTD: 1969 (55 years ago)
- Westech Equipment: 1971 (53 years ago)
Roller Pump Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Roller Pump Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
Japan
|
2 | 50.0% |
United States of America
|
1 | 25.0% |
China
|
1 | 25.0% |
