18 Digital Tachometer Manufacturers in 2024
This section provides an overview for digital tachometers as well as their applications and principles. Also, please take a look at the list of 18 digital tachometer manufacturers and their company rankings. Here are the top-ranked digital tachometer companies as of November, 2024: 1.Checkline, 2.Traceable(R), 3.Paul N. Gardner Company, Inc..
Table of Contents
What Is a Digital Tachometer?
A Digital Tachometer is an industrial device that reads and digitally displays the RPM of an engine or motor.
A familiar example is the tachometer installed in automobiles. Automobile tachometers measure the number of revolutions of the engine.
RPM is also a measure of the speed of rotational motion of an object. For example, when an object rotates only N times per minute, the rotational speed is expressed as N.
RPM stands for Revolutions Per Minute. In addition to RPM, it may also be written as min-1, both of which indicate the number of revolutions per minute.
Uses of Digital Tachometers
Digital Tachometers are used for inspection and maintenance of various industrial machines. In some cases, they are constantly measured to monitor the operating conditions of machinery. In the field of research and development, they are also used to measure the RPM of laboratory equipment.
An example in our daily lives is the tachometer in a car. In many cases, not only digital tachometers are used in cars, but also analog tachometers. Analog tachometers are easier to use than digital tachometers.
Digital tachometers are said to be easier to use when maintaining a target speed. On the other hand, analog tachometers are easier to use when adjusting to a target speed. The reason for this is that the speed of the analog needle movement also allows the driver to sense the rate of speed change.
Principle of Digital Tachometers
There are two types of digital tachometers, contact type and non-contact type, each with different principles.
1. Contact Type Digital Tachometer
The contact type digital tachometer measures the number of rotations by directly contacting the rotating shaft of the digital tachometer to the rotating shaft of the object to be measured. There are two methods of contact: contact with the end face of the target rotating shaft or contact with the side face of the rotating shaft.
- Contacting the end face of the rotating shaft
The rotating shaft of the digital tachometer rotates at the same speed as the shaft to be measured, and the measurement value can be read as it is. - Contacting the side surface of the rotating shaft
The rotating shaft of the target and the rotating shaft of the digital tachometer do not rotate at the same RPM. It is necessary to determine the relationship between the ratio of the rotation speeds based on the difference in their respective diameters.
2. Non-Contact Type Digital Tachometer
For non-contact types, there are electromagnetic types and photoelectric types.
- Electromagnetic type
A part of the measuring shaft is magnetized, and the change in the magnetic field when the electromagnetic sensor of the digital tachometer is brought close to the measuring shaft is converted to detect the number of revolutions. - Photoelectric type
A reflective mark is placed on the measuring shaft, red visible light from the digital tachometer is directed toward the reflective mark, and the reflected light is received by the light receiving element and amplified by an amplifier to measure RPM.
Other Information on Digital Tachometers
Cautions for Cutting Machines
Cutting tools such as end mills have a recommended cutting speed. This is the recommended cutting speed for machining a certain material with that tool, and is set according to the type of tool and material to be machined.
From this recommended cutting speed, a calculation using the tool diameter is necessary to set the speed of the machine tool. To obtain the same recommended rotational speed, the smaller the tool diameter, the faster the tool must rotate. In doing so, make sure that the capacity of the machine tool is not exceeded.
Also, when making this calculation, care should be taken with the unit of length. Tool diameter is usually expressed in millimeter as a unit, while cutting speed is expressed in meter/min and machining length per minute in meter.
List of 18 Digital Tachometer Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Japan
- Spain
- Sweden
- Taiwan
- United Kingdom
-
-
-
Checkline
Digital Tachometer / Length Meter
Manufacturer Overview
Checkline, founded in Lynbrook, New York in, in 1958 is a manufacturer of precision measuring instruments for quality control. The company's product portfolio includes force gauges, torque gauges, coating thickness gauges, wall thickness gauges, and textile test instruments. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also provide services including product selection, installation, preventative maintenance, troubleshooting, and repair.
-
-
-
-
-
Masport Inc.
Digital Tachometer
Manufacturer Overview
Masport Inc., established in 1910 in Lincoln, Nebraska, USA, is a manufacturer of vacuum pump systems and solutions. The products involve liquid ring vacuum pumps, rotary vane pumps, and truck-mounted vacuum systems, for efficient suction capabilities, optimal waste removal, and adjustable vacuum performance, resulting in efficient liquid and material handling applications. Industries spanning from wastewater management and industrial processes to environmental services and marine rely on these vacuum pump systems for efficient waste extraction and material transfer. The robust and advanced technology allows for precise vacuum control and optimized waste management for diverse industries.
-
-
-
-
-
Traceable(R)
Touchless/Contact Digital Traceable Tachometer
Manufacturer Overview
Traceable was established in 1978 and is headquartered in Webster, Texas, US, as a manufacturer and designer of serialized, calibrated, and certified Traceable lab instruments. The product portfolio includes thermometers, barometers, hygrometers, manometers, controllers, timers, clocks, stopwatches, and lab tools. These products find applications in diverse fields, serving purposes such as temperature and atmospheric pressure measurement, humidity monitoring, pressure measurements, process control, timekeeping, and laboratory analysis. These products are utilized across various industries, including healthcare, laboratory, and industrial sectors, as well as in biopharmaceutical industries.
-
-
-
-
-
Process Control Systems, Inc.
Digital Tachometers
Manufacturer Overview
Process Control Systems, Inc. operates out of Chaska, Minnesota and has a 40-year history of manufacturing rotational speed monitoring systems designed to monitor belt conveyors, bucket elevators, screw conveyors as well as other types of material handling and processing equipment with 5-year warranties. Process Control Systems products include switches, tachometers, monitors, and more. Process Control Systems products are often used in belt conveyors, dust collection systems, bucket elevators, and fans. In such machinery they can indicate damage or slippage, count or prove rotation, and indicate operating metrics such as speed and temperature.
-
-
-
-
-
Dart Controls, Inc.
Digital Tachometers
Manufacturer Overview
Dart Controls was founded in 1963 and is now headquartered in Zionsville, Indiana. The company is a designer and manufacturer of drives, controls, and accessories for electric motors to customers across North America and certain overseas countries. The company implements lean manufacturing with tools and concepts such as Kanban, Kaizen, just-in-time, and Poka-Yoke to improve reliability and reduce costs for customers. The company’s product offerings include digital potentiometers, low-voltage DC, encoders, and multiple types of drives. The company offers packaged total solutions of sensors and drives.
-
-
-
-
-
SAE Manufacturing Specialties Corp
Digital Tachometers
Manufacturer Overview
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
-
-
-
-
-
Paul N. Gardner Company, Inc.
Digital Handheld Contact Tachometers
Company Overview
Paul N. Gardner Company, Inc. was established in 1936 and is headquartered in Columbia, Maryland, US, as a manufacturer and distributor of physical testing instruments. The product range comprises laboratory supplies, color testers, abrasion testers, gel timers, density measurement apparatus, holiday detectors, thermometers, hygrometers, and optical testers, among others, with various features and specifications. These products serve a multitude of applications, including quality control, material analysis, surface testing, density measurement, moisture monitoring, and optical property assessment across industries such as manufacturing, aerospace, petroleum, food, construction, automotive, and research.
-
-
-
-
-
HydraCheck
Digital Tachometers
Distributor Overview
HydraCheck was established in 1990 and headquartered in West Valley City, Utah. The company is a distributor of diagnostic testing and maintenance for hydraulic systems across North America. The company provides support services for end customers as well as mechanics and technicians. The company’s product lines include testing products, diagnostic kits, and safety devices. Testing products include flanges, gauges, and thermometers while kits include identification kits and test kits. The company's safety devices include goggles, models, and guides.
-
-
-
-
-
Sugawara Laboratories Inc.
Stroboscopes
Manufacturer Overview
Sugawara Laboratories Inc. established in August 1954 and based in Kawasaki-shi, Kanagawa, Japan, is a manufacturer and supplier of industrial measuring equipment. The company has a rich history of revolution and expertise in the field. They offer a wide range of products, including stroboscopes with xenon flashlamps and torque dynamometers for creating quiet, ripple-free motors. Sugawara's products are used in various industries, contributing to energy conservation, convenience, and comfort in daily life. With an aim of providing reliability and load control systems tailored to each motor's characteristics, Sugawara has an eco-conscious society.
-
-
-
-
-
Watanabe Electric Industry Co. Ltd.
Frequency Meters / Counters
Manufacturer Overview
Watanabe Electric Industry Co. Ltd. are manufacturers of measurement and control instruments since 1940 in Japan. The company deals in signal converters, digital panel meters, non-contact meter relays, and electric current recorders. The signal converters are used to isolate and convert signals to prevent current ground loops, protect from external noise, signal boosting, and more. Digital panel meters also have various applications such as filter clogging monitors, weight measurement, conveyor rotation speed management, and many other uses. The equipment is known for its accuracy and stability while being in use.
-
-
-
-
-
TECPEL CO.,LTD.
Digital handheld Tachometer
Manufacturer Overview
TECPEL CO.,LTD. was established in 1990 and is a manufacturer of test and measurement devices based in Xindian, New Taipei City, Taiwan. The company manufactures various devices such as digital thermometers, temperature humidity transmitters, digital pH meters, digital handheld multimeters, and light meters datalogger. The products are manufactured under the CE requirements standards. The company was awarded the Asia-Pacific e-Business Champions of the Year 2008 from Alibaba. The company participated in various exhibitions such as Taitronix Exhibition, The 9th Taipei International Instrument Exhibition, and The Automotive Electronics Show 2018.
-
-
-
-
-
Ono Sokki
Digital Tachometer
Manufacturer Overview
Ono Sokki Co. Ltd., founded in 1954 and based in Yokohama, Japan, is a manufacturer, distributor, and supplier of electronic measuring instruments and control systems. Its products include sound level meters, vibration meters, and FFT analyzers, utilized in research and development, quality control, and by production line engineers, particularly in the automotive industry. The company was the first to be designated by the government as a producer of sound level meters in Japan and also obtained ISO 14001 certification in 1997.
-
-
-
-
-
PROMAX Test & Measurement SLU
Dual Digital tachometer
Manufacturer Overview
Promax Test & Measurement SLU, founded in 1963 and based in Barcelona, Spain, is a manufacturer of telecommunication instrumentation and electronics equipment. The ISO 9001-certified company stocks products like digital modulators for broadcast, earth resistance meters, and optical fiber fusion splicers used to provide testing solutions for satellite, cable, and digital terrestrial television. It stocks over 200 products at its Barcelona facility, with 18 calibration centers and several service centers worldwide. It produces on-demand PCB circuit boards and electronic equipment and offers software development, training, and industrial design services.
-
-
-
-
Manufacturer Overview
SKF UK is the British division of SKF, originally founded in 1907 and headquartered in Gothenburg, Sweden. SKF designs, develops, and manufacturers bearings, seals, lubrication systems, and services worldwide, with industrial and automotive segments, providing solutions for industries including aerospace, agriculture, transportation, food and beverage, general machinery, material handling, mining, energy, paper, and wind energy. SKF UK offers rolling bearings, mounted bearings, automotive seals, lubrication management, vehicle aftermarket services, waste electric products, and electronic equipment products as well as services including maintenance, remanufacturing, customization, and training.
-
-
-
-
-
PCE Instruments UK Ltd
Digital Tachometers
Company Overview
PCE Instruments UK Ltd., started in 199 and headquartered in Manchester, UK, is a manufacturer and supplier of test instruments, equipment, and tools for weighing, measuring, and control systems. The company offers more than 500 test equipment, including analyzers, inspection cameras, meters, detectors, and sensors, with applications in various fields like data acquisition, electrical engineering, environmental science, building inspection, and food processing. Its manufacturing and development division is ISO 9001 certified, all its test instruments, equipment, and tools are factory calibrated, and the company also provides services for custom test instrument design, installation, and maintenance.
-
-
-
-
-
Toolsavings, LLC
Digital Tachometers
Company Overview
Toolsavings, LLC is based in Chicago, Illinois and is a supplier and distributor of industrial supplies for both individual and corporate customers. Toolsavings offers an extensive catalog spanning over 10 categories such as Cutting Tools, Toolholding, Air and Power Tools, Fasteners, and Measuring Instruments from brands such as 3M and Destaco. Cutting tools include drills, reamers, and saws. Toolholding includes boring heads, retention knobs, and sawholders. Air and Power Tools includes blow guns, grinders, and tire gages. Fasteners includes screws and pins. Measuring instruments includes calipers, microscopes, and squares.
-
-
-
-
-
Jamieson Equipment Co., Inc.
Digital Tachometers
Company Overview
Jamieson Equipment Company (JEC) was founded in 1982 and located in the state of Georgia. JEC serves infrastructure-related industries including pavement with concrete, aggregate, and asphalt, chemicals, sewage and waste management, and agriculture and food. JEC sells, installs, retrofits, repairs, and offers training and troubleshooting for a range of components and tools from simple fittings to motion sensors to electronics to valves to actuators, cranes, mixers, silos, hoppers, and plants.
-
-
-
-
-
AutomationDirect Inc.
Digital Tachometers
Distributor Overview
AutomationDirect.com was founded in 1994 to provide solutions for the industrial automation market and has been growing its list of offerings ever since. AutomationDirects’ extensive catalog includes individual components such as cables, various controls, I/O devices, relays, gauges, fittings, and sensors to complete systems. Many parts and devices, especially PLC units are customizable. AutomationDirect.com also provides support via video instructions, online manuals, a learning library, an active community forum to further assist customers.
-
-
Digital Tachometer Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Checkline |
15.4%
|
| 2 | Traceable(R) |
11.5%
|
| 3 | Paul N. Gardner Company, Inc. |
9.6%
|
| 4 | Process Control Systems, Inc. |
9.6%
|
| 5 | Masport Inc. |
7.7%
|
| 6 | Dart Controls, Inc. |
7.7%
|
| 7 | SKF |
7.7%
|
| 8 | SAE Manufacturing Specialties Corp |
5.8%
|
| 9 | HydraCheck |
5.8%
|
| 10 | Toolsavings, LLC |
3.8%
|
Derivation Method
The ranking is calculated based on the click share within the digital tachometer page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Ono Sokki: 613
- Watanabe Electric Industry Co. Ltd.: 190
- Sugawara Laboratories Inc.: 64
Newly Established Company
- HydraCheck: 1990 (34 years ago)
- Traceable(R): 1978 (46 years ago)
- PROMAX Test & Measurement SLU: 1963 (61 years ago)
Company with a History
- SKF: 1907 (117 years ago)
- Paul N. Gardner Company, Inc.: 1935 (89 years ago)
- Watanabe Electric Industry Co. Ltd.: 1940 (84 years ago)
Digital Tachometer Manufacturers in United States
*Including some distributors, etc.
- Checkline
- Masport Inc.
- Traceable(R)
- Process Control Systems, Inc.
- Dart Controls, Inc.
- SAE Manufacturing Specialties Corp
- Paul N. Gardner Company, Inc.
- HydraCheck
Global Distribution of Digital Tachometer Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
8 | 53.3% |
Japan
|
3 | 20.0% |
Taiwan
|
1 | 6.7% |
Spain
|
1 | 6.7% |
Sweden
|
1 | 6.7% |
United Kingdom
|
1 | 6.7% |
