This section provides an overview for flow cells as well as their applications and principles. Also, please take a look at the list of 13 flow cell manufacturers and their company rankings. Here are the top-ranked flow cell companies as of December, 2024: 1.Avantes, 2.REFLEX Analytical Corporation, 3.CPS Fluidics.
Table of Contents
A flow cell flowmeter is a type of orifice flowmeter that measures flow rate by generating differential pressure by installing an orifice in the piping. Water or air flows through the piping, and the value is measured and indicated by a float installed in the tributary flow.
Compared to other flow meters, orifice flow meters have a simple structure and are easy to install. However, they are not suitable for measuring substances with significantly different viscosity due to the pressure loss caused by the orifice in the piping and because they are mainly designed for water or air applications.
Flow cell flow meters are used to measure and control the flow rate of piping in machinery.
They are mainly used in environments where high accuracy is not required, since they are compact, do not require calibration when measuring water or air, and can be maintained without stopping the flow by using a strainer.
For simple flow meters, the position of the float in the meter is directly observed when checking the flow rate. However, digital displays and devices that generate an alarm when the flow rate is outside the set range are also available.
Flow cell flow meters consist of an orifice plate and a flow meter installed inside a pipe.
When fluid contacts the orifice plate in the piping, differential pressure is generated, and the fluid flows into the flow meter section. This is a tributary flow, according to the magnitude of the differential pressure.
The fluid flowing into the flow meter section pushes up the float according to the differential pressure. The flow rate is measured by determining the amount of change and applying it to the Bernoulli equation. The fluid used for measurement is returned to the main flow through the return pipe.
Since the differential pressure generated in the pipe and the differential pressure observable in the flow meter are almost equal, and the flow rate into each pipe is proportional, the flow rate in the pipe can be derived by determining the flow rate in the flow meter.
Since flow cell flow meters are based on water or air at room temperature, correction is required for some types of fluids. Some products are also available with a hot wire sensor installed to compensate for changes in measured values due to temperature changes.
*Including some distributors, etc.
Sort by Features
Sort by Area
ALine Provides Microfluidic Solutions for the Pharmaceutical, Biotech, IVD, Diagnostic and Point of care markets. We engineer single use consumables that integrate sample prep and detection using biosensors, optical or electroactive sensors. We are experts at the integration of membranes, microfluidic valves, microfluidic pumps and microfluidic mixers located in 13,000 sq.ft., we do rapid prototyping, engineering and manufacture all under one roof. our expert support has lead to over $3.1 billion in follow on funding.
Specialty Glass Products (SGP) is an American manufacturer specializing in custom components made from various hard materials including glass, sapphire, and quartz. The company was established in 1961 and is based in Willow Grove, Pennsylvania. The company produces prisms, optical components and lenses, flats, light pipes, and stirring rods. These are used in various industries, including in the laser manufacturing, fiber optic, semiconductor, and biomedical sectors. SGP also offers glass and quartz turning, hot working, heat tempering and chemical strengthening services for customer projects.
REFLEX Analytical Corporation., founded in New Jersey, is a supplier of spectroscopy and reflectance accessories and supplies. The company's product portfolio includes Deuterium and Tungsten Lamps, AA Lamps Graphite Tubes, Dies Mills Press Equipment, Liquid Solid Gas Analysis Cells, and Variable Temp High Pressure Analysis Cells. The company serves an international analytical community of spectroscopists, chemists, and chromatographers within research and development laboratories at the government agency, university, and corporate levels.
Custom Sensors and Technology was founded in 1980 and is a manufacturer of integrated process monitoring equipment and accessories in Fenton, Missouri. The company's expertise lies in producing handling systems, flow cells, scrubbers, and photometric instruments for industries such as food and beverage, pulp and paper, pharmaceutical, as well as chemicals. The company also offers application engineering services to create process monitoring solutions tailored to suit customers’ needs. This service develops custom sample monitoring systems and accessories and assists with various stages of product development
CPS Fluidics., founded in Connecticut, United States in 2021, is a manufacturer of a range of custom fluidic products from large scale flow cells to microfluidic devices. The company's product portfolio includes flow cells that enable selective detection and measurement of a wide range of physical, chemical, or biological properties, microfluidics miniaturized assay workflow to decrease assay volumes, and process solutions to support the science behind the flow cells and microfluidic systems, including interfaces/connections, machining hard materials, and diverse combinations of materials and bonding techniques.
FireflySci, Inc., founded in 2015, is a manufacturer, designer, and distributor of Cuvettes and Spectrophotometer Calibration Standards in Suite A, Northport, NY. The company produces flow-through cells, screw cap cuvettes, tablet dissolution cells, anaerobic cells with glass pouches, and macro volume cuvettes. It also produces cuvettes with graded seal tubes, water jacketed cuvettes, process fiber optic probes, fiber optic process flow cells, and cuvette accessories such as washers, replacement cover slides, transfer pipettes, cell racks, and flow cell mount systems.
Sarspec Lda, founded in 2014 and headquartered in Vila Nova de Gaia, Portugal, Porto, Portugal, is a manufacturer of optical measurement instruments and components. The company's primary products are a wide range of compact and flexible optical UV-VIS and NIR spectrometers. Its modular sources for illumination and excitation for irradiation enable absorbance, transmittance, and reflectance measurements. Each of its spectrometers is tailored for industry-specific applications, and its flagship devices are used for assessing the color and bitterness of beer and measuring the purity of olive oil.
Swan, founded in 1991 and based in Switzerland, is a manufacturer of process analytical instruments for monitoring water quality. The company specializes in online water quality measuring analytical systems and offers various solutions for water analysis. Its product portfolio includes solutions for high-purity water, steam and condensate, wastewater, and effluents, addressing the needs of sectors such as pharmaceuticals, oil and gas, and municipal water treatment. The company's instrumentation covers various parameters such as ammonium, chlorine, and dissolved oxygen, catering to diverse industries from semiconductors to food and beverage.
Avantes was established in 1994, headquartered in Apeldoorn, the Netherlands, as a manufacturer in developing fiber-optic spectroscopy instruments and systems. Avantes is a famous pioneer in the advancement and use of compact spectrometers. The company is engaged in the manufacturing of laboratory instruments and instrumentation systems. Avantes is a company that specializes in producing advanced fiber-optic spectroscopy systems. These systems are designed to provide precise measurements within the electromagnetic spectrum's ultra-violet, visible, and near-infrared ranges.
HORIBA RADIO LABORATORY was established in Japan in 1945 and has spent the last three-quarters of a century growing as an R&D company and engaged in international operations. HORIBA Scientific offers 200 years of experience developing high-performance scientific instruments and analytical solutions. The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing, and metrology to a broad range of scientific R&D and QC measurements. Operating in Asia, Europe, and North and South America, HORIBA scientific develops solutions that go beyond just products.
Hamamatsu Photonics K.K., established in 1953 and headquartered in Hamamatsu, Japan, is a manufacturer of sensors and emitters for both visible and invisible light. It stocks products like LEDs, lamps, and photodiodes used in several industries, including consumer electronics, dental imaging, and environmental monitoring. The sensor and light source components are also available as modules and units that can be incorporated into systems the company develops, like optical measurement systems or imaging systems. The ISO 9001-certified company stocks over 15,000 devices, units, and systems that ship to over 100 destinations worldwide, and it has ten research and production bases.
QED Environmental Systems, established in 1982 and headquartered in Dexter, Michigan, USA, is a manufacturer of environmental technology solutions. Its products serve various purposes, including groundwater and soil monitoring, gas management applications in medical and food industries, and control and monitoring systems for environmental and energy markets. Its products hold global electrical, mechanical, and environmental certifications, and are meticulously engineered and manufactured in controlled facilities, adhering to rigorous ISO standards to satisfy diverse codes and certifications like UL, CSA, EC, and ATEX based on specific applications.
PreSens Precision Sensing GmbH, founded in 1997 and situated in Regensburg, Germany, is a manufacturer and distributor of optical-chemical sensors and scientific instruments. Its product line includes sensor probes, meters, and complete systems for optical measurements of oxygen, pH, and carbon dioxide, catering to various scientific research fields and industrial applications. Certified with EN ISO 13485:2016 and EN ISO 9001:2015, the company underscores its adherence to maintaining quality standards in product production.
Ranking as of December 2024
Derivation MethodRank | Company | Click Share |
---|---|---|
1 | Avantes |
14.4%
|
2 | REFLEX Analytical Corporation |
13.6%
|
3 | CPS Fluidics |
13.6%
|
4 | Custom Sensors & Technology |
11.4%
|
5 | Specialty Glass Products |
9.8%
|
6 | FireflySci, Inc. |
7.6%
|
7 | HORIBA |
6.8%
|
8 | Swan |
5.3%
|
9 | Sarspec |
4.5%
|
10 | PreSens Precision Sensing GmbH |
4.5%
|
Derivation Method
The ranking is calculated based on the click share within the flow cell page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
Country | Number of Companies | Share (%) |
---|---|---|
United States of America | 6 | 54.5% |
Japan | 2 | 18.2% |
Portugal | 1 | 9.1% |
Switzerland | 1 | 9.1% |
Netherlands | 1 | 9.1% |
14 products are listed.
Nippon Flow Cell
50+ people viewing
Last viewed: 2 hours ago
The flow cell flow meter is a flow meter that combines the base socket with a built -in orificeplate and a special area flow meter as a flow rate i...
Nippon Flow Cell
50+ people viewing
This is an area flow meter that realizes a short delivery time by standardizing the fluid and flow rate. Feature ・ The fluid and flow rate are sta...