11 Surface Gauge Manufacturers in 2024
This section provides an overview for surface gauges as well as their applications and principles. Also, please take a look at the list of 11 surface gauge manufacturers and their company rankings. Here are the top-ranked surface gauge companies as of April, 2024: 1.Alpa Srl, 2.PRECISION ENTERPRISES, 3.Starrett.
Table of Contents
What Is a Tuscan?
The tuscan is a tool that draws a bevel line on a workpiece at a height parallel to the base surface of a surface plate or other base surface.
It is also used for rough centering when gripping black leather material in a general-purpose lathe's 4-jaw chuck, etc. An arm with a beveling section is fixed to an upright base, and the beveling section can be adjusted to any height.
The marking section is equipped with a marking needle made of high-speed steel or other material that scratches the workpiece, a pencil, and a mechanical pencil. The tuscan is used for marking work, which requires skilled tousling work since the marking method varies depending on the specification conditions.
Uses of Tuscans
Tuscans are used to perform manual processing processes that do not rely on machines. The main purposes of tuscan-based grading operations are as follows:
- Draw dimensions and shapes on workpieces according to drawing specifications
- Draw horizontal, vertical, circle, and center lines
- Punching for drilling operations
When it is difficult to work accurately with just the instructions on the drawing, using a tuscan to define the reference line allows for more precise work. For example, when determining welding points, supplying a workpiece that has been previously beveled can prevent misalignment during welding operations.
Tuscans are also useful when determining the center of a round bar. While rotating the round bar, draw four parallel lines on the surface plate using the tuscan, then connect the opposite vertices to find the intersection point, which is the center of the round bar.
Tuscans are used not only for metalworking but also for making stars for sculptures and plastic models.
Principle of Tuscans
The tuscan has an arm extending from a metal fitting mounted perpendicular to the base, and the arm is held at a height and angle that makes it easy to work with the workpiece. A needle or pen is attached to the end of the arm to draw directly on the workpiece.
When drawing a beveled line on the workpiece, the tuscan is not moved but slides over the workpiece. Therefore, it is necessary to have the skill to place the tip of the arm on the workpiece firmly and without any misalignment.
In addition, the type of needle or pen to be attached to the tip of the arm is also important. For example, burning the tip of a needle will allow you to put in a more secure keg line. If a pencil is attached, it can erase mistakes and is also useful for drawing horizontal lines on uneven objects without damaging the material.
The method of marking varies depending on the specification conditions. In addition, the needle at the tip that hits the workpiece requires a high degree of sophistication and wear resistance. In center positioning work, one side of the needle may be bent at a 90-degree angle.
Other Information About Tuscan
1. What Is Roughing Out?
Tuscans are also used for centering operations in the 4-jaw chuck of general-purpose lathes. In this operation, tuscans are usually used for rough centering work in black leather material.
Centering is the process of minimizing the runout of the workpiece when the chuck is rotated. Centering is performed by placing the tuscan in contact with a point of high runout and rotating the chuck to check the clearance between the tuscan and the workpiece, and then adjusting the tightness of each jaw on the 4-jaw chuck to eliminate the clearance.
When centering a workpiece on a machined surface, a tuscan cannot be used because centering must be performed with a high degree of accuracy. In such cases, a dial gage is used instead of a tuscan to read the numerical value for centering.
2. What Is a Height Gauge?
Basically, a height gauge is a measuring instrument for measuring the height and thickness of a workpiece. The height and thickness of a workpiece can be measured by placing the measuring surface of the scriber against the top surface of the workpiece to be measured.
The tip of the scriber is sharp and can be used to draw a bevel line on a metal workpiece, etc. In this case, the height gage is used to measure the height and thickness of the workpiece. In this case, the height gauge plays the same role as a tuscan, allowing the scribe line to be drawn at a more accurate height.
List of 11 Surface Gauge Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- India
-
-
-
Starrett
SURFACE GAGES
Manufacturer Overview
The L.S. Starrett Company was founded in 1880 and is headquartered in Athol, Massachusetts. The company is a manufacturer of industrial, professional, and consumer measuring and cutting tools to customers globally. The company has three general product segments: precision hand tools, gage blocks, and surface plates. Precision hand tools include depth gages, micrometers, squares, and over 15 other types of handheld measuring tools. Gage block offerings include individual blocks, sets, and accessories.
-
-
-
-
-
JaincoLab
Surface Gauge
Manufacturer Overview
JaincoLab, established in 1982, is a reputable manufacturer and supplier of laboratory equipment based in Ambala Cantt, India. With a strong attention on quality, JaincoLab provides a wide range of cutting-edge lab instruments and solutions. The company’s diverse product portfolio includes laboratory glassware, microscopes, educational charts, and more. JaincoLab's devotion to excellence is reflected in its products' precision and reliability, catering to the needs of educational institutions, research laboratories, and healthcare facilities.
-
-
-
-
-
JAGDAMBA TOOLS CORPORATION
Surface Gauge
Manufacturer Overview
JAGDAMBA TOOLS CORPORATION, founded in 1987 and based in Delhi, India, is a manufacturer and supplier of different kinds of industrial and magnetic tools. The company provides a range of industrial, pneumatic, precision, cutting and hand tools as well as welding cables. Some of its main products are permanent magnetic chucks, economy micrometer, spray guns, diamond dressers, adjustable reamer and spring calipers. The company has a wide distribution network within India for timely deliveries.
-
-
-
-
-
Uptech Engineering
Surface Gauge
Manufacturer Overview
Uptech Engineering is an Indian ISO 9001 certified manufacturer of magnetic products, machine shop aids, and inspection instruments that was established in 1999. Based in Pune, Maharashtra, the company produces various magnetic products including lifters, chucks, tool setting gauges, and bases. It also offers a selection of non-magnetic precision vices and sine tables. Uptech Engineering provides additional contract manufacturing services to its clients in the engineering, medical device manufacturing, automotive, and defense industries.
-
-
-
-
-
Armatech Associates
Surface Gauge
Company Overview
Armatech Associates has been a manufacturer and distributor of magnetic goods and tools for inspection, since 1980. The products include crystal bases that are magnetic and non-magnetic, non-magnetic V blocks, crystal gauges & blocks, chunks of crystal that are permanently magnetic, and crystal demagnetizers. Magnet separators, lifting magnets, crystal sine bars, dial comparator stands, and crystal & sine vices are further goods. The company in Maharashtra, India, employs mild steel and stainless steel as raw materials and serves the industrial, manufacturing, aerospace, and processing industries.
-
-
-
-
-
Shreepad Industries
Surface Gauge
Company Overview
Shreepad Industries, established in 1962, is a manufacturing and exporting company of magnetic products, based in India. The company manufactures magnetic products such as universal surface gauges, extra heavy duty surface gauges, light duty and lever type dial indicator stand, magnetic base stand, and toolmakers parallel clamps, etc. It has emerged as a front-runner in dealing of quality magnetic, engineering and precision tools. With its advanced technological core that continuously assimilates the latest in product development to improve and modify the products as per customer's requirement, which is done by keeping pace with the latest technology.
-
-
-
-
-
-
-
-
-
-
-
Alpa Srl
SURFACE GAUGES
Company Overview
Alpa Srl, a company founded in 1943 and headquartered in Pontoglio, Italy, is a manufacturer and supplier specializing in measuring machines and instruments. The company's product portfolio includes analog micrometers, CNC coordinate measuring machines, and digital dial gauges. These products are used in various sectors, including renewable energy generation, metalworking, and research and development. The company offers services including technical support, fast delivery of its products to customers, and calibration of its instruments while possessing the ISO 9000 and IATF 16949 certificates.
-
-
-
-
-
PRECISION ENTERPRISES
Surface Gauge
-
-
Surface Gauge Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Alpa Srl |
33.3%
|
| 2 | PRECISION ENTERPRISES |
33.3%
|
| 3 | Starrett |
33.3%
|
Derivation Method
The ranking is calculated based on the click share within the surface gauge page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Starrett: 1,800
- Shreepad Industries: 12
Newly Established Company
- Uptech Engineering: 1999 (25 years ago)
- JAGDAMBA TOOLS CORPORATION: 1987 (37 years ago)
- Krishna International: 1984 (40 years ago)
Company with a History
- Starrett: 1880 (144 years ago)
- J.d. Engineering Co.: 1961 (63 years ago)
- Shreepad Industries: 1962 (62 years ago)
Surface Gauge Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Surface Gauge Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
India
|
8 | 88.9% |
United States of America
|
1 | 11.1% |
