1. Metoree
  2. Valves
  3. Hand Operated Valves
Description 150 Manufacturers
Yantai Jereh Petroleum Equipment & Technologies Co., Ltd.
Xi'an Parri Control Technology Co.,Ltd.
XHnotion
World Wide Metric, Inc.
WIKA Alexander Wiegand SE & Co. KG
Wharton Hardware and Supply
Western States Hardware
Wenzhou Solid Mechanical Equipment Co., Ltd
Weidouli Valves Co., Ltd.
Viega USA
Vesta Automation SRL
VELO ACCIAI S.R.L.

150 Hand Operated Valve Manufacturers in 2024

This section provides an overview for hand operated valves as well as their applications and principles. Also, please take a look at the list of 150 hand operated valve manufacturers and their company rankings. Here are the top-ranked hand operated valve companies as of November, 2024: 1.XHnotion, 2.Xi'an Parri Control Technology Co.,Ltd., 3.Wharton Hardware and Supply.

Table of Contents

What Is a Hand-Operated Valve?

Compressed air is used as a power source in various production equipment such as machine tools, conveying equipment, and inspection equipment.

Compressed air is sent to production equipment, which drives air cylinders to transport products, robots to clamp products, and air blowers to clean products.

Hand-operated valves are devices that allow operators to manually change airflow direction in piping or air tubes, stop air flow, or adjust the flow rate using a lever or handle for switching.

Uses of Hand-Operated Valves

Hand-operated valves are used for the following applications:

  1. Speed control of conveying equipment
  2. Equipment (loaders, shifters, etc.) that removes products from machine tools and transfers them to subsequent processes may cause products to fall or shift position due to vibration if the transfer speed is too fast.
  3. The airflow rate can be adjusted with hand-operated valves to change the speed without causing problems.
  4. Switching valve for interchangeable jigs
  5. Jigs may be replaced when changing models in equipment that processes a variety of products.
  6. The air hose must be disconnected and replaced for jigs with air cylinder clampers.
  7. Air leaks can be prevented by stopping the air supply to the jig with the switching valve and then disconnecting the hose.

Features of Hand-Operated Valves

There are various types of hand-operated valves, each with distinct features:

Residual Pressure Relief Valve

  • When production equipment is stopped during a process due to an abnormality, it is dangerous to take action while air pressure remains in the equipment.
  • The cylinder may become unhooked for some reason and suddenly recoil, possibly injuring the operator.
  • For this reason, hand-operated valves for releasing residual pressure can be attached to the piping route so that safe measures can be taken after removing the residual pressure.

Directional Changeover Valve

  • This valve changes the direction of airflow to alter the operation of equipment.
  • The airflow direction is indicated on the lever handle attached to the valve body.
  • For example, in inspection equipment that supplies clean air, filters need to be cleaned periodically, but production will be halted if the equipment cannot be operated during cleaning.
  • Two filters can be installed in parallel circuits, and a directional valve can select the circuit that is not being cleaned, allowing cleaning without stopping production.

Flow Control Valve

  • A screw-type knob is attached to the valve body, and as the knob is tightened, the airflow path inside the valve is gradually restricted, thereby reducing airflow through the valve.

List of 150 Hand Operated Valve Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Austria
  • Canada
  • China
  • France
  • Germany
  • India
  • Italy
  • Japan
  • Netherlands
  • Switzerland
  • Taiwan
  • United Kingdom
    • Trico Corp.
      • United States of America Address: 1235 Hickory Street Pewaukee, Wisconsin, United States of America

      Manufacturer Overview

      Trico Corporation, established in 1917 and headquartered in Pewaukee, Wisconsin, is a manufacturer of lubrication equipment, spray coolant systems, and electrical accessories. Its product line includes products for storage, handling, and grease lubrication. It also offers visual inspection tools, central lubrication systems, and metalworking products. Its comprehensive selection addresses various maintenance and challenges, ensuring optimized machinery performance. The company also provides other lubrication management solutions, offering diverse services like training and mentoring, in-plant services, and lube management.

    • High Pressure Equipment Company
      • United States of America Address: 2955 West 17th Street Erie, Pennsylvania, United States of America

      Manufacturer Overview

      High Pressure Equipment Company, part of Graco Inc., established in 1954 in the United States, is a manufacturer of high pressure valves, fittings and tubing. The company manufactures high pressure valves, fittings and tubing with superior standards, delivered with the shortest lead times, and priced to ensure its customers' success. Today, it features a broad product portfolio capable of handling pressures up to 150,000 psi and carries an extensive inventory allowing it to offer same day shipping of many items. It also offers a complete line of reactors and pressure vessels and a recently expanded family of pumping systems and generators.

    • Bezares USA
      • United States of America Address: 27634 Commerce Oaks Drive, Oak Ridge North, Texas, United States of America

      Manufacturer Overview

      Bezares USA, founded in 2000 and headquartered in Oak Ridge, Texas, USA, is a manufacturer of hydraulic components for commercial vehicles. The company specializes in manufacturing a diverse range of hydraulic components and systems, including power take-off (PTO) units, hydraulic pumps, and hydraulic valves. These components are used for the robustness and stability, ensuring consistent and efficient power transmission in various hydraulic applications. The products find extensive use in industries such as construction, agriculture, and commercial vehicles, where dependable hydraulic systems are essential for powering equipment and machinery.

    • Viega USA
      • United States of America Address: 585 Interlocken Blvd., Broomfield, Colorado, United States of America

      Manufacturer Overview

      Viega has a history of over 120 years and is based in Broomfield, Colorado. Viega is a developer and producer of hardware and industrial tools and pipe fitting technology. Viega’s equipment specializes in materials such as copper, stainless, polymer, lead bronze, and cupronickel. Some of Viega’s product listings include elbows, tees, adapters, flanges, caps, unions, couplings, reducers, branch connectors, tubing, manifolds, stub-outs, closet adapters, outlet boxes, press sleeves, closet risers, ballcock nuts, fasteners, sealing elements and gaskets.

    • Vector Technologies Ltd
      • United States of America Address: 8301 West Parkland Court, Milwaukee, Wisconsin, United States of America

      Manufacturer Overview

      Vector Technologies, Inc. is a Milwaukee, Wisconsin-based designer and manufacturer of vacuums and related parts, serving industries such as automotive, food & beverage, mining, and wastewater management. The company’s product lineup features industrial vacuums, hydro-excavating, and water jet-vacuum categories along with various spare parts. Industrial vacuums are available in. both trailer-mounted versions and skid-mounted versions. Hydro excavating systems are available in capacity from 300 gallons up to 1200 gallons. Water jet vacuums are also available for up to 800 gallons at rates up to 4000 PSI.

    • The Kraissl Co., Inc.
      • United States of America Address: 299 Williams Avenue Hackensack, New Jersey, United States of America

      Manufacturer Overview

      The Kraissl Company was founded in 1926 and is headquartered in Hackensack, New Jersey. The company is a manufacturer of strainers, filters, valves, and pumps for industry and business. All company products are manufactured in the U.S.A. to ensure workmanship quality. The company’s capabilities include working with a wide range of materials such as cast iron, bronze, aluminum, steel, and other special alloys. The company offers international delivery through authorized sales and service representatives.

    • SUPERLOK USA
      • United States of America Address: 5777 Olivas Park Dr., Unit G, Ventura, California, United States of America

      Manufacturer Overview

      Superlok North America is a manufacturer of quality tube fittings, valves, and related products for various industries, including petrochemical, semiconductor, and biopharmaceutical. The company was established in 1998 and has since become a credible name in the industry, known for its products and excellent customer service. The company's product line includes a broad range of valves, fittings, and tubing products, such as ball valves, needle valves, check valves, tube fittings, and pipe fittings. In 2019, Superlok North America was awarded the prestigious "Supplier of the Year" award by a leading semiconductor manufacturer for its customer service and quality products.

    • Seelye Acquisitions, Inc.
      • United States of America Address: 946 Century Lane, Apopka, Florida, United States of America

      Manufacturer Overview

      Seelye, Inc. includes DJ Plastics and Tefen Products, USA. Seelye is a manufacturer of thermoplastic welders and welding-related equipment. Seelye has 3 product segments: hot air plastic welders, Tefen fittings and products, and DJ custom tank fabrication. Hot air plastic welders include plastic welders, thermoplastic welding rods, plastic welding tips, welder elements, welder replacement parts, optional equipment, and master appliance heat guns. Tefen fittings and products include tight push fittings, barb block fittings, general industrial accessories, and air blow guns. DJ Custom tank fabrication examples include plating tanks, dip tanks, and water holding tanks among others.

    • Plast-O-Matic Valves, Inc.
      • United States of America Address: 1384 Pompton Avenue Cedar Grove, New Jersey, United States of America

      Manufacturer Overview

      Plast-O-Matic was formed in 1967 in New Jersey, now situated in Cedar Grove, New Jersey. Plast-O-Matic serves aquarium, chemical dosing, chemical processing, metal finishing, semiconductor, wastewater treatment, water purification, and government application industries. Product offerings include product data sheets, CAD downloads, installation & maintenance instructions, ball valves, check valves, gauge guards, pressure regulators, process cooling sticks, anti-siphon valves, shut-off and diverter valves, sight glass & level indicators, solenoid valves, venting valves, other process controls & pumps, and custom valves.

    • Papailias Inc.
      • United States of America Address: 245 Pegasus Ave. Northvale, New Jersey, United States of America

      Manufacturer Overview

      Papailas Inc was founded in 1976 and is a manufacturer of industrial process observation products and equipment, including sight glasses, lighting, sight flow indicators, liquid level gauges, sanitary flow indicators, glass products, and sight glass accessories. In addition, the company offers various services such as design engineering, prototyping, custom fabrication, and small/long-run production. Papailas also provides particle analyzer systems, intrinsically safe and explosion-proof illuminators, level control systems, and continuous/point level detection systems. These products are used for industrial process observation and control field applications.

    • Ogontz Corp.
      • United States of America Address: 2835 Terwood Road Willow Grove, Pennsylvania, United States of America

      Manufacturer Overview

      Ogontz Corporation was established in 1954 and headquartered in Willow Grove, Pennsylvania, the United States. The company serves the industrial, railroad, and solar markets as a concept designer, manufacturer, and consultant. For industrial markets, the company produces steam traps, freeze and scald protection, and numerous valves including control valves and sensing valves. For the railroad markets, the company provides track signaling equipment, meters, gauges, and HVAC equipment. For the solar market, the company provides freeze protection and hot water temperature control products.

    • NIBCO INC.
      • United States of America Address: 1516 Middlebury Street Elkhart, Indiana, United States of America

      Manufacturer Overview

      NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.

    • Nexen Group, Inc.
      • United States of America Address: 560 Oak Grove Parkway Vadnais Heights, Minnesota, United States of America

      Manufacturer Overview

      Nexen Group Inc. was established in 1902 and is based in Minnesota as a manufacturer of industrial motion control products. The company offers different products in the Power Transmission line that generate twisting power in clutches, brakes, torque limiters, and coupling products, and their various designs are compatible with imperial and metric components. Their Precision Rotary Motion technology consists of rotary drive systems, torque rotary brakes, and mechanical torque limiters, all delivering zero backlashes. And for Linear Motion Control, Nexen provides a wide selection of Rail Brakes and Rod Locks.

    • Micromold Products, Inc.
      • United States of America Address: 7 Odell Plaza #133 Yonkers, New York, United States of America

      Manufacturer Overview

      Micromold Products was established in 1954 and headquartered in Yonkers, New York. The company is a manufacturer of a broad line of corrosion-resistant plastic products, specifically Kynar, polypropylene, nylon, and Kel-F, for process industries. The company has developed proprietary manufacturing processes for PTFE and PFA machined parts and weldments. The company’s product line includes a complete line of dip pipes, sparges, valves, strainers, and piping systems. The company makes a full line of CNC machined parts for process industry OEMs including PTFE, PEEK, and UHMW polyethylene ball and butterfly valve seats, pump seals, and instrumentation components.

    • Maedler North America
      • United States of America Address: 3135 Lakewood Ranch Blvd #107, Bradenton, Florida, United States of America

      Manufacturer Overview

      Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.

    • Kuriyama of America, Inc.
      • United States of America Address: 360 E. State Parkway, Schaumburg, Illinois, United States of America

      Manufacturer Overview

      Kuriyama of America Inc., established in 1968 and based in Schaumburg, Illinois, is a manufacturer of an expansive line of thermoplastic hoses and accessories. The company stocks rubber, thermoplastic, and metal products for industrial and commercial applications, alongside accessories such as fittings and couplings. It is part of the eight subsidiaries of the parent company, and it has six distribution centers and an academy to help consumers learn about its products. It stocks products from subsidiaries like Piranha Hose Products Inc., Kuri Tec, and Hose Tec.

    • Kitz Corp. of America
      • United States of America Address: 10750 Corporate Dr., Stafford, Texas, United States of America

      Manufacturer Overview

      Established in 1951, KITZ Corporation of America is a manufacturer that specializes in producing and supplying industrial valves and controls for various industries such as oil and gas, chemical, power generation, and water treatment based in Stafford, Texas. KITZ provides various types of valves such as ball, gate, globe, check, and butterfly valves along with control valves and actuators. Their products are designed to control the flow of liquids and gases. With branch offices and subsidiaries in the United States, Germany, Brazil, Japan, and many locations throughout Asia, Kitz is able to serve customers globally.

    • International Polymer Solutions, (iPolymer)
      • United States of America Address: 5 Studebaker, Irvine, California, United States of America

      Manufacturer Overview

      International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.

    • Hydrasearch Company LLC
      • United States of America Address: 203A Log Canoe Circle, Stevensville, Maryland, United States of America

      Manufacturer Overview

      Hydrasearch Company LLC is a designer and manufacturer of fluid control and transfer products for the maritime industry that was established in Stevensville, Maryland, in 1962. The company’s product lineup includes fluid control components for defense applications such as quick disconnect couplings, underwater hull penetrators, and submarine hose assemblies. It also offers recreational marine hardware such as raw water strainers, sounding tube deck fittings, and vent check valves. The company chiefly serves the defense and recreational boating industries, with additional clients in the American commercial sector.

    • HYDAC Technology Corporation
      • United States of America Address: 2260 City Line Road, Bethlehem, Pennsylvania, United States of America

      Manufacturer Overview

      HYDAC technology Corporation was founded in 1963 and has head offices globally. HYDAC is a manufacturer and designer of hydraulic, electronic, control, and fluid conditioning solutions optimized for mobile and industrial applications. HYDAC serves the agricultural, forestry, automotive, construction machinery, machine tools, material handling, mining, municipal, oil & gas, power generation, primary metals, pulp & paper, and wind energy markets. HYDAC’s product offerings include hydraulic and lube filters, accumulators, valves, cooling systems, electric sensors & controls, filter systems, and IoT diagnostics, process filters, fuel filtration, power units, cylinders, and related accessories.

    • Hayward Flow Control
      • United States of America Address: 1 Hayward Industrial Dr Clemmons, North Carolina, United States of America

      Manufacturer Overview

      Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.

    • EVSCO, Inc.
      • United States of America Address: 2309 N Ringwood Drive Suite M, McHenry, Illinois, United States of America

      Manufacturer Overview

      EVSCO, Inc. is an Illinois-based elliptic valve manufacturer founded in 1980. The company produces a variety of valves for manual, electric, and pneumatically-actuated systems that operate on gas or pressurized air for standard and customized flow patterns. Its valves are available in polypropylene or PVDF (polyvinylidene difluoride) thermoplastic and are shipped with standard Viton (fluoroelastomer material) seals. Further, EVSCO produces a stack valve that can be combined with other valves and utilized as a signal unit.

    • Entegris
      • United States of America Address: 129 Concord Road, Billerica, Massachusetts, United States of America

      Manufacturer Overview

      Entegris Inc., founded in 1966 and headquartered in Billerica, Massachusetts, is a supplier of advanced materials and process solutions for the life sciences, semiconductor, and other tech industries. Some of its products and solutions include specialty chemicals, gas delivery systems, and filters used by logic, memory, and semiconductor equipment manufacturers. Over 65% of its factories are ISO 14001 and ISO 45001 certified, while its stock is traded on NASDAQ under ENTG. The ISO 9001-certified company has 4,400 active patents and offers several services, including analytical, field support, and refurbishment services.

    • Dynalab Corp.
      • United States of America Address: 175 Humboldt Street, Suite 300 Rochester, New York, United States of America

      Manufacturer Overview

      Dynalab Corp was founded in Rochester, New York in 1957. Together with its wholesale division, Dynalon Labware, Dynalab produces and distributes standard and custom-made scientific equipment and laboratory supplies across North America. Science equipment and sampling apparatus offerings include hygrometers, mailing point devices, rollers, water stills, powders, seals, various samplers, and drills. Some of Dynalab’s laboratory supplies include Azlon plastics, burn-up boxes, desiccators, hydrometers, pipettes, shields, stopcocks, tote boxes, tubing, and watch glasses.

    • DYMAX
      • United States of America Address: 318 Industrial Lane, Torrington, Connecticut, United States of America

      Manufacturer Overview

      Dymax Corporation was founded in 1980 and is headquartered in Torrington, Connecticut. The company develops and manufactures rapid and light-curable materials and light-curing systems for the medical, consumer electronics, wearables, aerospace, and automotive electronics industries. The company’s product segments include Light Curable Materials, Light-Curing Equipment, and Dispensing Equipment. Light Curable Materials include masking, gasketing, and activators. Light-Curing Equipment includes conveyor systems, flood-curing systems, and radiometers. Dispensing Equipment includes dispense valves, syringe dispensers, and material reservoirs. The company also offers application engineering, equipment, and system integration services.

    • Discover Valve
      • United States of America Address: 2817 Janitell Rd, Colorado Springs, Colorado, United States of America

      Manufacturer Overview

      Discover Valve, established in Colorado Springs, Colorado in 2003, is a manufacturer of valves and water meters, used for water management across various industries. Their product portfolio includes water control valves, including gate valves, ball valves, butterfly valves, check valves, and pressure reducing valves, designed for precise water flow management. The company also manufactures hydrants and water distribution accessories, enabling water supply management for municipalities, irrigation and agriculture, and utility companies.

    • Coronet Parts Mfg. Co., Inc.
      • United States of America Address: 883 Elton St Brooklyn, New York, United States of America

      Manufacturer Overview

      Coronet Parts Manufacturing Company Inc. was founded in the early 1960s and headquartered in Brooklyn, New York. The company is a custom manufacturer of industrial hardware and fittings serving the automotive industry and plumbing industry among others. The company’s product lines include fittings, valves, assemblies, and other tools. Plumbing specialty items include tank levers, flood stoppers, and supply tubes. Assorted tools include tube cutters, bending tools, flaring tools, and related parts.

    • Conval
      • United States of America Address: 96 Phoenix Avenue, Enfield, Connecticut, United States of America

      Manufacturer Overview

      Conval, established in 1967, and headquartered in Enfield, Connecticut, is a manufacturer that specializes in industrial valves. Their product range includes ball valves, gate valves, globe valves, and check valves which these products find applications in industries such as nuclear power, water treatment, agriculture, and hydraulic systems. Conval's valves are designed to handle high temperatures, pressures, and corrosive environments, ensuring safe and efficient flow control. The company holds certifications such as ISO 9001, demonstrating their adherence to quality and meeting industry standards. Their valves are crucial for process control and safety in various industrial applications.

    • Colonial Engineering, Inc.
      • United States of America Address: 6400 Corporate Ave., Portage, Michigan, United States of America

      Manufacturer Overview

      Colonial Engineering, Inc. was founded in 1972 and is headquartered in Portage, Michigan. The company is a manufacturer of CNC, injection-molding, and other assembly and sub-assembly components for such industries as water treatment, automotive, HVAC, and industrial OEM. The company’s custom injection molding processes include molding, assembly, and fabrication using numerous materials such as PVC, Acetel, Nylon, Santoprene, and related thermoplastic polymers. The companys standard product lines include plastic valves, valve actuation devices, thermoplastic gear driven valves, unions, and butterfly valves.

    • Clippard
      • United States of America Address: 7390 Colerain Avenue Cincinnati, Ohio, United States of America

      Manufacturer Overview

      Clippard Instrument Laboratory, Inc. was founded in 1941 in Arkansas and is now located in Cincinnati, Ohio. The company is a manufacturer of miniature pneumatic valves, specializing in ultra low leak, precision pressure control, and high-resolution flow control. Categories of Clipard Products include electronic valves, proportional valves, isolation valves, electronic controls, custom solutions, ppressure regulators, control valves, directional control valves, air pilot valves, air preparation equipment, and fittings hose, and tubings.

    • Century Instrument Co.
      • United States of America Address: 11865 Mayfield, Livonia, Michigan, United States of America

      Manufacturer Overview

      Century Instrument Co is a diaphragm and valve manufacturer based in Livonia, Michigan. Established in 1950, Century Instrument began as a diaphragm manufacturer for pneumatic operators but has since expanded to manufacturing process control valves for the food & beverage, water treatment, pharmaceutical, petroleum chemicals, paper, and utilities industries. Century Instrument’s lineup includes ASA and ASTM-certified diaphragm components in automatic and manual builds and spare parts for different diaphragm models such as 630H, 630C, and 630HRT. Century has a long customer list and a reputation for supplying quality process control valves and instrumentation.

    • Cash Acme
      • United States of America Address: 2727 Paces Ferry Rd SE, Building Two Suite 1800, Atlanta, Georgia, United States of America

      Manufacturer Overview

      Cash Acme is based in Atlanta, Georgia and has a history of over 100 years and is part of the RWC family of brands also including SharkBite, HoldRite, John Guest, and EZ-FLO. Cash Acme is a manufacturer of water control valves for residential, commercial, and industrial plumbing applications. Cash Acme products include pressure regulating valve, temperature & pressure relief valves, thermostatic mixing valves (TMVs), back flow preventers, general plumbing & heating, as well as other applications.

    • Bonney Forge Corporation
      • United States of America Address: 14496 Croghan Pike, Mount Union, Pennsylvania, United States of America

      Manufacturer Overview

      Bonny Forge was originally founded in 1876 and is based in Mount Union, Pennsylvania. The company isis a manufacturer of fittings, valves, and other products used in petrochemical, refining, power, energy, and industrial piping markets. The company’s five product lines are Forged Steel Fittings and Unions, Forged Steel Branch Connections, Forged Steel Valves, Cast Steel Valves, and Forged Ball Valves. The company uses CAD to allow customers to customize desired specifications of machines, such as valve size, Cv coefficient, and material.

    • Baelz North America
      • United States of America Address: 4875 Deen RoadSuite, 100Marietta, Georgia, United States of America

      Manufacturer Overview

      Baelz North America is the Marrietta, Georgia-based official supplier of Baelz Automatic components and engineered systems for North America. Baelz Automatic was originally founded in Germany in 1896 and today serves as a manufacturer of energy-saving components and engineered systems for controlling process heating and cooling applications. These often serve the automotive, food, wine, marine, and chemical industries. Baelz North America is a manufacturer in addition to being a supplier of control valves. The company also manufactures and distributes actuators, controllers, ejectors, and other related parts while adding inspection and repair after market services.

    • Assured Automation
      • United States of America Address: 263 Cox Street Roselle, New Jersey, United States of America

      Manufacturer Overview

      Assured Automation was founded in 1983 and is headquartered in Roselle, New Jersey. Assured Automation is an ISO 9001:2015 certified supplier of automation equipment serving manufacturing, chemical, and pharmaceutical industries among others. Assured Automation offers products in 2 major product lines: valves and flow meters. Valves include compact on/off valves, actuated 2-way and 3-way ball valves, actuated butterfly valves, actuated plug valves, actuated globe valves, manual gate valves, manual valves, lead free brass valves, thermal and remote shutoff valves, valve actuators, and valve & actuator accessories. Flow meters include water meters, fuel meters, industrial flow meters, lube-oil meters, and others.

    • ASC Engineered Solutions, LLC
      • United States of America Address: 2001 Spring Road, Suite 300, Oak Brook, Illinois, United States of America

      Manufacturer Overview

      ASC Engineered Solutions is based in Waynesboro, Pennsylvania. ASC serves the mechanical & plumbing systems, commercial & residential, mining, food & beverage, industrial, fire protection, oil & gas, energy & power, and water & wastewater industries as a procure and repair servicer. ASC is ISO 9001:2015 certified.    A sample of ASC’s offerings include fire protection & fabrication products such as fabrication equipment and seismic bracing, flow control such as commercial& residential valves, performance products such as engineered pipe supports & snubbers, pipe joint systems such s grooved and high pressure fittings, as well as press products and support systems.

    • Aqua Environment Co., Inc.
      • United States of America Address: 3100 Kerner Blvd, Ste N, San Rafael, California, United States of America

      Manufacturer Overview

      Aqua Environment Co., Inc. established in San Rafael, CA in 1981 is a manufacturer of high-pressure valves and regulators for gas and fluid control. Their product portfolio includes Pressure Regulators, Gas Control Systems, fluid control accessories, and gate valves and check valves, used to handle a wide range of fluids and gases. The company serves industries such as Oil and Gas, Petrochemical and Refining, Chemical Processing, Aerospace and Aviation and Power Generation.

    • Anchor Fluid Power
      • United States of America Address: 5553 Murray Road, Cincinnati, Ohio, United States of America

      Manufacturer Overview

      Anchor Fluid Power is a manufacturer of fluid power components for high pressure hydraulic systems such as flanges, quick couplings, and more, based in Cincinnati, Ohio and was established in 1982. The company offers a wide range of products including hydraulic valves, flanges, hydraulic ball valves, suction and return line test point adapters and hoses. They are an ISO-9001 and ISO-45001 registered company, and provide solutions for their customers’ hydraulic connection requirements.

    • Western States Hardware
      • United States of America Address: 15117 Salt Lake Avenue, La puente, California, United States of America

      Company Overview

      Western States Hardware was founded in La Puente, California in 1968. Western States Hardware serves customers across the United States, offering products in a number of categories including: nuts, screws, & bolts, metric nuts, screws, & bolts, drills & cutting tools, saw blades, electrical connectors, pipe nipples, & pipe fittings, industrial brushes, parker brass fittings & valves, anchors, abrasive pads, belts, & discs, chain & rigging accessories, various tools, valves, staple & nail guns, power & insert bits, and hoses, tubing, & clamps. Altogether, Western States Hardware offers over 750,000 products available.

    • Uponor Inc.
      • United States of America Address: 5925 148th Street West, Apple Valley, Minnesota, United States of America

      Company Overview

      Uponor is based in Apple Valley, Minnesota. Uponor is a manufacturer and distributor for plumbing and climate needs including fire safety, plumbing, and CAD designing. Uponor’s product catalog includes a full range of parts, machines, and tools including valves, power tools, operational controls, gauges, and panels. Uponor offers services for construction and engineering, design assistance, pipe sizing, and training. Uponor offers online and factory training services for plumbing, fire safety, radiant and hydroponics.

    • TVI Valves
      • United States of America Address: 53 South 7th Street, Emmaus, Pennsylvania, United States of America

      Company Overview

      TVI Valves was originally founded in 1986 and is currently headquartered in Emmaus, Pennsylvania. The company is a distributor of valves and accessories to numerous industries ranging from amusement parks to health care to photography to water purification. The company’s four primary product lines are Plastic Valves, Metal Valves, Instrumentation, and Valve Accessories. Examples of valves include ball, butterfly diaphragm, and plug valves. Valve accessories include actuators, stem extensions, gears, fasteners, and other devices.

    • Texas Industrial Remcor, Inc.
      • United States of America Address: 1807 State Hwy 95, Little River-Academy, Texas, United States of America

      Company Overview

      Texas Industrial Remcor, Inc., started in 1972, is a manufacturer and distributor of control systems and sprayer valve solutions, from solenoid valves to motorized valves and valve accessories such as pressure regulators, adaptors, isolators, and mounting brackets. Headquartered in Little River Academy, Texas, the company offers services to agriculture, industrial, electronics, commercial, governmental, and recreational industries with an ISO 9001:2015 certification. The company provides the find-a-dealer service to help international customers access a dealer near them for parts of a current sprayer system or design and build a new system.

    • Stephens Mfg. Co., Inc.
      • United States of America Address: 711 W 4th St., Tompkinsville, Kentucky, United States of America

      Company Overview

      Stephens Manufacturing was started in 1957 in Tompkinsville, Kentucky. Stephens is a manufacturer and distributor of concrete-related equipment. Categories include ready mix plants, precast plants, central mix plants, RCC, environmental, and material handling. Ready mix batch plants that generally have quicker installation. Precast plants are custom built. Portable mixers mix RCC and other mixes. Environmental components include dust collectors, reclaimers, and wash down racks. Material handling includes batchers, bins, hoppers, silos, conveyors, and vertical pigs. Stephens offers assistance in customer problem solving and delivers to customers globally.

    • Steel & O'Brien Manufacturing
      • United States of America Address: 7869 Route 98 Arcade, New York, United States of America

      Company Overview

      Steel & O’Brien was founded in 1990 and operates out of Arcade, New York. Steel & O’Brien is a distributor of standard and custom-machined/fabricated fittings and assemblies. Steel & O’Brien serves the food, dairy, beverage, brewery, winery, distilling, biotechnology, pharmaceutical, cosmetic, personal care, extraction, semiconductor, and water treatment industries. Steel & O’Brien offers a range of products including various fittings, valves, actuators, diaphragm valves, pumps, accessories, sight glasses, strainers, filters, tubing, hangers, and others.

    • Seal Fast, Inc.
      • United States of America Address: 5603 Harvey Wilson Dr., Houston, Texas, United States of America

      Company Overview

      Seal Fast, Inc. was founded in 1933 and is headquartered in Houston, Texas. Seal Fast is a distributor of sealing and fitting products. Seal Fast product categories include couplings, fire protection, gauges, pipe fittings and valves, hose and hose protection, and sheet rubber. Couplings include cam and groove, dry disconnect, shank, ring lock, foot valves, brass fittings, hydraulics, clamps, and banjo couplings. Fire protection equipment also includes gaskets, and industrial ground monitors. Gauges include siphons, oxygen, and thermowells. Pipe fittings and valves include combination nipples and flanges. Hose and hose protection include Fire hoses and industrial rubber. Sheet rubber includes skirt board and cloth insert neoprene.

    • RED-WHITE VALVE CORP.
      • United States of America Address: 20600 Regency Lane, Lake Forest, California, United States of America

      Company Overview

      RWV was founded in 1971 as a joint venture between Mitsui & Company, Ltd. and Toyo Valve Company, Ltd. of Japan as Red White Valve Corp. In 2003, the company joined Valvoindustria Ing. Rizzio of Italy and today is headquartered in Lake Forest, California. The company is an ISO 9001:2015 and 14001:2015 certified manufacturer of valves for various industries, sold through stocking and non-stocking distributors. The company’s valve products by category include lead-free, hydronic, standard, and commercial & industrial valves. The company’s products by type include balancing, ball, butterfly plumbing, and radiator valves.

    • RapidAir Compressed Air Products
      • United States of America Address: 6111 Mill Creek Dr., Auburndale, Wisconsin, United States of America

      Company Overview

      RapidAir Compressed Air Products (RapidAir) is headquartered in Auburndale, Wisconsin. RapidAir is a manufacturer and distributor of compressed air piping systems. RapidAir’s store sells premade systems and also offers custom-design assistance for customers to design their own systems. RapidAir’s sore includes Fastpipe brand aluminum pipes as well as clips, elbows, and other components; Maxine tubing, clamps, and fittings; beveling tools, fittings, valves, pipe cutters, as well as numerous other accessories and master kits.

    • Pro Dyne Corp.
      • United States of America Address: 136 Green Tree Road, Suite 100 Phoenixville, Pennsylvania, United States of America

      Company Overview

      Pro Dyne Corporation (Pro Dyne) was established in 1985 as a manufacturers' representative agency covering the states of Pennsylvania, New Jersey, Delaware and Maryland. Pro Dyne is headquartered in Phoenixville, Pennsylvania. Pro Dyne is now a regional distribution company and handles fluid handling products both in the United States and abroad. Six primary product lines Pro Dyne represents are Scot Pump, Young Touchstone, Weg Motors, Delavan Nozzles, Rub Ball Valves, and Pro Dyne SS Pumps.

    • Metro Hydraulic
      • United States of America Address: 1271 McCarter Hwy. Newark, New Jersey, United States of America

      Company Overview

      Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.

    • Metraflex Co.
      • United States of America Address: 2323 W. Hubbard St., Chicago, Illinois, United States of America

      Company Overview

      Metraflex Company was founded in 1958 and is based in Chicago, Illinois. Metraflex is a distributor of piping specialty products to the commercial HVAC industry among others. These are used in vibration isolation, noise dampening, protection against thermal expansion and contraction, pipe alignment, seismic movements, pump connections, and flow conditioning. Metraflex Product categories include metal expansion joints, rubber expansion joints, Metraloop, seismic breakaway hangers, energy saving pump connectors, flexible metal hoses, flexible couplings, valves, compensators, strainers, air vents, pipe guides, anchors, wall penetration seals, and fittings.

    • MAXPRO Technologies, Inc.
      • United States of America Address: 7728 Klier Drive South, Fairview, Pennsylvania, United States of America

      Company Overview

      MAXPRO Technologies was founded in 195 and is founded in Fairview, Pennsylvania. MAXPRO is a distributor for pumping products including air driven liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings, and tubing. Other products include high-pressure fittings such as adapters, bulkheads, couplings, crosses, elbows, nipples, and tees. Rental equipment and complete systems such as air amplifier systems, liquid pumping systems, gas booster systems, oxygen gas booster packages, portable test carts, high pressure test systems and custom systems are also available.

    • Kinequip, Inc.
      • United States of America Address: 365 Old Niagara Falls Blvd.Buffalo, New York, United States of America

      Company Overview

      Kinequip, Inc. was founded in 1946 in Buffalo, NY as a distributor of industrial parts, accessories, and kits. Today these offerings have grown to include motors, compressors, blower systems, clams, pumps, various fittings, gauges, and sensors, as well as pneumatic and high-pressure devices. Kinequip also serves as a distributor for individual device and parts manufacturers. Kinequip additionally offers custom-designed solutions ranging from R&D to unique components and special-made parts, as well as value added designs on demand.

    • Jensen Inert Products
      • United States of America Address: 3773 NW 126th Ave. Building 1, Coral Springs, Florida, United States of America

      Company Overview

      Jensen Inert Products was founded in 1988 and is headquartered in Coral Springs, Florida. Jensen Inert Products is a manufacturer and distributor of non-contaminating, chemically resistant products made of fluoropolymers, silicone, and other inert materials used in the analysis, sample collection, distillation, processing, and product storage for industries including pharmaceutical, medical, electronics, and aerospace industries. A sample of Jensen Inert Products product lines includes gloves, bottles, cap liners, tubing, and syringes. Jensen Inert Products offers custom die cutting of gaskets, liners, and other components of thicknesses depending on the material.

    • Industrial Specialties Mfg., Inc.
      • United States of America Address: 4091 So. Eliot Street, Englewood, Colorado, United States of America

      Company Overview

      Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.

    • GTek Automation
      • United States of America Address: 26212 Dimension Drive, Suite 150, Lake Forest, California, United States of America

      Company Overview

      GTek Automation was founded in 1997 as Pacific Engineering and is headquartered in Lake Forest, California. GTek Automation is a technology-based distributor of pneumatic components, leak test and measurements systems. In addition to product distribution, GTek Automation offers product assembly and kitting services to assist our customers reduce the overall cost of component and system acquisition. GTek Automation specializes in the complete integration of the pressure or vacuum source, and all of the auxiliary pneumatic components.

    • East Bay Distributors Inc.
      • United States of America Address: 400 Franklin Street Bristol, Rhode Island, United States of America

      Company Overview

      East Bay Distributors, Inc. is a distributor for pneumatic applications, specializing in connectors, fittings, and industrial parts used across industries by both small companies and Fortune 500 corporations. The company’s distribution categories include SPC Fittings, SPC Products, Brass Fittings & Adapters, and Accessories. The company also features Dewalt protective products, including eyewear and work gloves. The company’s inventory management systems for customers offers benefits of lowering inventory costs, improving cash flow, and savings customers time and resources.

    • Doering Company
      • United States of America Address: 6343 River Road SE, Clear Lake, Minnesota, United States of America

      Company Overview

      Doering Company was founded in 1969 and operates out of Clear Lake, Minnesota. Doering is a distributor for pump-related products for markets such as marine, mining, industrial, energy, aerospace, forestry, and agriculture. Doering’s product lines include cartridge valves, hydraulic hand pumps, manifolds, mobile and agricultural valves, and hydraulic valves. Cartridge valves include directional control, flow control, pressure control, and load holding. Hydraulic hand pumps include dual-stage hand pumps and single-stage hand pumps. Manifolds and accessories include custom designs based on customer needs. Mobile and agricultural valves include directional-control and lock valves.

    • Distributor to Industry, Inc.
      • United States of America Address: 1017 East Murdock Street Wichita, Kansas, United States of America

      Company Overview

      Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.

    • Becker & Associates, Inc.
      • United States of America Address: 563 Commonwealth Drive Suite 600, East Dundee, Illinois, United States of America

      Company Overview

      Becker is a service provider and stocking distributor of products and equipment for aviation refueling, petroleum handling, process, and industry. Becker & Associates was founded in 1967 and is headquartered in East Dundee, Illinois. Becker has two primary divisions, aviation and industrial. The aviation division provides aviation refueling equipment, fuel quality control testing equipment, fuel monitors, and more. The industrial division includes various filters and elements, spill kits, desiccants, and more. Becker’s manufacturers include Des-Case, Jonell, Facet International, Eaton, and Shawndra Products.

    • Asahi/America, Inc.
      • United States of America Address: 655 Andover St., Lawrence, Massachusetts, United States of America

      Company Overview

      Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.

    • ARI Valve Corp.
      • United States of America Address: 1738 Sands Place SE Marietta, Georgia, United States of America

      Company Overview

      ARI Valve Corporation is based in Marietta, Georgia, and is the manufacturer of valves and related parts for fluid, liquid, gas, and vapor handling processes used in the global automobile, shipping, chemical, food processing, and heating industries. The company has a wide range of valves available including bellows seal valves, control valves, and strainers/check valves. Additional product lines include steam traps, actuators, and manifolds. Customers needing a specific valve not among the hundreds available are encouraged to contact the company for more information.

    • World Wide Metric, Inc.
      • United States of America Address: 37 Readington Road Branchburg, New Jersey, United States of America

      Distributor Overview

      World Wide Metric was founded in 1970 and is based in Branchburg, New Jersey. World Wide Metric is a distributor of products for the global maritime & industrial flow control and fluid power markets. World Wide Metric products include valves in DIN, JIS, and ANSI standards, fittings such as hydraulic, JIC flared, ORFS, and BSP adapters, flanges, tubing, coupling, expansion joints, tube clamps, gaskets, marine firestop, RM pressfit & drain, and other industrial products.

    • Ryan Herco Flow Solutions (HQ)
      • United States of America Address: 3010 N SAN FERNANDO BLVD, California, United States of America

      Distributor Overview

      Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.

    • Ohio Pipe, Valve & Fittings, Inc.
      • United States of America Address: 3900 Trent Avenue Cleveland, Ohio, United States of America

      Distributor Overview

      Ohio Pipe, Valves, & Fittings, Inc. was founded in 1929 as Ohio Pipe Bending & Coiling Company. Also known as the Ohio Pipe companies, they specialize in fully welded, seamless, stainless steel, and PVC pipes of many sizes. Ohio Pipe companies also sell flanges, couplings, ball, butterfly, gate, control, and relief valves, with thousands of unique items in stock. Ohio Pipe companies’ past and current customers include power plants, steel mills, oil and gas companies, chemical plants, water and wastewater facilities, as well as many OEMs.

    • Maxpro South, Inc.
      • United States of America Address: 92 Wilson Rd, Humble, Texas, United States of America

      Distributor Overview

      MaxPro South, Inc. was founded in 2000 and is based in Humble, Texas. MaxPro South is a stocking distributor of liquid pumps, gas boosters, air amplifiers, valves, fittings, and tubing. MaxPro South specializes in MAXIMATOR brand products. Rental equipment including coning and threading machines, hydrostatic testing equipment, and gas booster equipment is also available. MaxPro South uses factory-certified parts to repair and condition liquid pumps, gas boosters, air amplifiers, and valves. MaxPro South also offers on-site installation of custom systems including coning, threading, and bending of tubing. Service contracts are also available.

    • Marcuse & Son, Inc.
      • United States of America Address: 3501 North Main St Fort Worth, Texas, United States of America

      Distributor Overview

      Marcuse & Son was established in 1925 and operates out of Fort Worth, Texas. Marcuse & Son is a distributor of air compressors and air compressor parts and accessories. Air compressor offerings include reciprocating air compressors and rotary style air compressors. Marcuse & Son’s accessories include air receivers, alternators, belt guards, block heaters, brass valves and fittings, breather vents, compressor lubricants, exhaust mufflers, filters, regulators & lubes, refrigerated air dryers, and water separators.

    • Liquidyne Process Technologies, Inc.
      • United States of America Address: 11925 W INTERSTATE 70 FRONTAGE RD N STE 700, WHEAT RIDGE, Colorado, United States of America

      Distributor Overview

      Founded in 1993, Liquidyne Process Technologies serves the dairy, brewery, distillery, biotech, pharmaceutical, & cannabis industries. Liquidyne offers a full line of sanitary and single-use products including process equipment components, sanitary equipment, single-use pumps and valves, single-use fittings and connectors, custom single-use assemblies, sanitary hose assemblies, sanitary valves, and single-use bioprocessing systems. Liquedyne produces all equipment in an ISO14644 Class 7-certified cleanroom has also attained 9001:2015, USP Class VI Testing, ASME Bioprocessing Equipment, and EHEDG certification status. Liquedyne also offers process optimization and on-site process audit & evaluation services.

    • E-Motion, Inc.
      • United States of America Address: 3720 W 1st Ave, Eugene, Oregon, United States of America

      Distributor Overview

      E-Motion Inc. is a distributor for electric automation based in Eugene, Orgeon. The company is a distributor of many electric automation parts, with additional offerings in pneumatic, modular aluminum framing, and instrumentation products. The company’s two primary segments are electric actuators and pneumatic automation. The electric actuator segment includes rack and pinion linear actuators, rod type electric actuators, rodless actuators, actuator controls, and lift kits. The pneumatic automation segment includes standard air cylinders, rodless cylinders, guided cylinders, and rotary actuators.

    • Dunham Rubber & Belting Corporation
      • United States of America Address: 682 Commerce Parkway West Drive, Greenwood, Indiana, United States of America

      Distributor Overview

      Dunham Rubber & Belting Corp. (DRB) has been in operation since 1965 and is based in Greenwood, Indiana. DRB offers a variety of products and services, including conveyor belts and accessories, hydraulic hose and fittings, industrial hose and fittings, sanitary hose and fittings, material handling and ducting, sheet rubber and gaskets, UHMW, polycarbonate, and acrylic sheets, as well as supplies for the egg processing, brewery, distillery, and winery industries. In January of 2023, DRB was acquired by Belt Power, an independent distributor and fabricator of conveyor system components.

    • DistributionNOW
      • United States of America Address: 7402 N Eldridge Pkwy Houston, Texas, United States of America

      Distributor Overview

      DistributionNow is a brand of NOW Inc. that was founded in 1862 and is headquartered in Houston, Texas. NOW is a distributor for downstream energy and industrial products for petroleum refining, chemical processing, LNG terminals, power generation utilities, and industrial manufacturing operations around the world. NOW provides consumable maintenance, repair, and operating supplies; pipes, valves, fittings, flanges, gaskets, fasteners, electrical products, instrumentations, artificial lift, pumping solutions, valve actuation and modular process, and measurement and control equipmen safety supplies, and personal protective equipment, as well as applied products and applications, including artificial lift systems, coatings, and expendable items. NOW also offers OEM equipment.

    • Dawson-Macdonald Co., Inc.
      • United States of America Address: 845 Woburn St., Wilmington, Massachusetts, United States of America

      Distributor Overview

      Dawson-Macdonald Co., Inc. was founded in 1928 and is headquartered in Wilmington, Massachusetts. Dawson-Macdonald is a developer and producer of production manufacturing equipment, systems, and supplies for surface preparation.Dawson-Macdonald’s product offerings include air filtration equipment, abrasives, air blast equipment, shot blast equipment, wet blast equipment, wheel blast equipment, and vacuum systems. Dawson-Macdonald also offers rental options as well as preventative maintenance, service, and repair both in house or in the field.

    • Compressed Air Systems, Inc.
      • United States of America Address: 9303 Stannum Street Tampa, Florida, United States of America

      Distributor Overview

      Compressed Air Systems was founded in Tampa, Florida in 1963. Compressed Air Systems supports customers in a wide array of industries including food & beverage, medical applications, industrial, electronics, fleet maintenance, aerospace, pharmaceuticals, plastics processing, CNC machine shops, and woodworking. Compressed Air Systems sells air compressors, railcar gate openers and various related products. Compressed Air Systems also offers services including audit, leak compressed air leak elimination, compressed air rentals, and turnkey packages for industrial equipment systems.

    • Circle Valve Technologies Inc.
      • United States of America Address: 1533 Gehman Road, Harleysville, Pennsylvania, United States of America

      Distributor Overview

      Circle Valve was founded in 1986 and headquartered in Harleysville, Pennsylvania. Circle Valve is a value-added distributor and manufacture rep of industrial valves, fittings, filters, and measurement control devices for a variety of industries and applications. Among Circle Valve’s product listings are check valves, relief valves, vacuum & high purity fittings, circle seal solenoid valves, Jefferson solenoid valves, Atkomatic solenoid valves GO regulators, cryogenic valves & equipment, hoke valves, Gyrolok Tube Fittings, Circle Seal Control Valves, and various measurement devices.

    • Strahman Group
      • United States of America Address: 2801 Baglyos Circle, Bethlehem, Pennsylvania, United States of America

      Distributor Overview

      BI-TORQ Valve Automation was founded in 1981 and is now part of STRAHMAN Group. BI-TORQ is a distributor of plant optimization and safety products including valves and actuators used in oil & gas, food & beverage, manufacturing, pharmaceutical, and other industries. The company’s primary product lines include thermal shut-off valves, ball and butterfly valves, actuators, and knife gates. The company also sells accessories & repair kits including limit switches, NAMUR solenoids, and spring return handles.

    • ARCO Engineering, Inc.
      • United States of America Address: 3317 Gilmore Industrial Blvd, Louisville, Kentucky, United States of America

      Distributor Overview

      ARCO Engineering was founded in Louisville, Kentucky in 1954. ARCO Engineering, Inc. is a distributor of Pressure, Temperature and Liquid Level instruments, instrument valves, heat trace, comfort heaters, and safety relief valves. ARCO Engineering specializes in products for the natural gas, process, chemical, power, wastewater and OEM markets. ARCO Engineering offers many types of parts including calibration instruments, hand valves, thermocouples, digital meters, drive pressure gauges, respirators, jet pumps, and pressure relief valves.

    • Gemels spa
      • Italy Address: Via Gambirasio, 20/22, Trescore Balneario, Bergamo, Italy

      Manufacturer Overview

      Gemels spa is an Italian manufacturer of hydraulic ball valves and related products that was established in 1969 in Trescore Balneario, Bergamo. The company primarily produces hydraulic ball valves for controlling fluids in hydraulic systems, electric motors for powering pumps or conveyors, and quick couplings for connecting or disconnecting hoses or pipes. It also offers technical support and after-sales services including repair and replacement. The company’s products are mainly used by clients in the marine, chemical processing, and oil and gas industries.

    • Yantai Jereh Petroleum Equipment & Technologies Co., Ltd.

      • Yantai Jereh Petroleum Equipment & Technologies Co., Ltd.
        Wellhead Valves

      • China Address: No. 27 Jereh Road, Laishan District, Yantai, China

      Manufacturer Overview

      Yantai Jereh Petroleum Equipment & Technologies Co. Ltd. is a Chinese manufacturer of oil field equipment that was established in Yantai, Shandong in 2004 as a subsidiary of Jereh Group. The company produces a wide range of well completion, drilling, and stimulation equipment. These include off-shore as well as land rigs, and flowline products such as choke or kill manifolds and nitrogen generators. It also offers cementing trucks and pumps for mobile operations and demanding environments. The company maintains locations in over 50 countries including in the North America, Russia, and Africa.

    • Jianhu Jielin Petrochemical Machinery Co., Ltd.
      • China Address: No.25, 4#Road, Jianhu Private Industrial Park, Yancheng City, Jiangsu Province, China

      Manufacturer Overview

      Jianhu Jielin Petrochemical Machinery Co. Ltd. is based in Yancheng City, Jiangsu Province, and is a Chinese manufacturer of oil field machinery and spare parts established in 2012. The company specializes in bops, choke and kill manifolds, and wellheads. Its lineup includes plug valves, blowout preventers, and bop control units. It also offers industrial grade desanders and hydraulic gate valves. The company's products are made in accordance with ISO 9001 standards, as well as API-6A, API-16A, and API-16C equipment standards.

    • DI NICOLA
      • Italy Address: Via Mazzini, 11 San Giovanni Teatino CH, Regione Abruzzo, Italy

      Manufacturer Overview

      DI NICOLA, established in 1928 and based in San Giovanni Teatino, Abruzzo, Italy, is a manufacturer of valves and electromechanical equipment. The company produces other products related to drinking water treatment plants, irrigation, wastewater treatment plants, dams, hydroelectric plants, and industrial installations. Some of the produced by DI NICOLA include flange adapters, disassembly joints, steel clapet valves, and vent valves. The company is supplying the products for industrial and hydraulic use. Every product produced meets the quality standards.

    • FPT Fluid Power Technology S.r.l.
      • Italy Address: Via Campo Sportivo, 54, Ne (GE), Liguria, Italy

      Manufacturer Overview

      FPT Fluid Power Technology S.r.l., established in 1966 and headquartered in Genoa, Italy, is a manufacturer of high-pressure hydraulic equipment from 700 to 4,000 bar. The company's products include lifting, bolting, and tensioning systems. It also offers both standard and custom-made products according to customer specifications. It has the latest generation of CNC machines for turning and milling to manufacture all components that are assembled and tested. The company has a quality management system certificate ISO 9001:2008. It serves various industries such as construction, mining, oil and gas, shipbuilding, and more.

    • Vesta Automation SRL

      • Vesta Automation SRL
        Valves

      • Italy Address: Via Martiri di Belfiore 69/A Rovigo, Veneto, Italy

      Manufacturer Overview

      Vesta Automation is an Italian manufacturer of pneumatic systems and components that was established in Bologna in 1986. The company specializes in products that are designed for industrial automation processes. These include pneumatic logic elements for control applications, pneumatic grippers for positioning applications, and pneumatic cylinders for motion control applications. Aside from its wide range of products, the company also offers technical support, personnel training, and consultation services for unique client projects.

    • SAI S.P.A.
      • Italy Address: Via Olanda 51Modena, Italy

      Manufacturer Overview

      SAI SPA, established in 1964 and headquartered in Modena, Italy, is a designer and manufacturer of crankshaft radial piston hydraulic motors. The company's main products include a wide range of hydraulic motors and rakes, gearboxes and electronic controls connected to motors for the construction of drive units. The company also offers development joint projects, customization of existing products, and the start-up of prototype machines. The company's services the supply of spare parts, analysis and repair following a breakdown, and the extension of product guarantees.

    • Kendrion
      • Netherlands Address: Vesta Building - 5th floor Herikerbergweg, Amsterdam, Netherlands

      Manufacturer Overview

      Kendrion, established in 1923 is a manufacturer, designer and provider of compact and connected actuators of global transition towards electrification and sustainable energy. The company is ISO 14001:2015, IATF 16949:2016, ISO/IEC 27001:2013, and ISO 50001:2018 certified. Rooted in Germany and headquartered in the Netherlands, they serve industries across Europe, the Americas, and Asia. Their products line includes intelligent actuators, industrial brakes, sensors, sound systems, valves and fluid control in wind turbines, robots, electric vehicles, and industrial processes. They also develop industrial magnetic, industrial control, industrial drive, and automotive systems.

    • HOSOKAWA ALPINE Group
      • Germany Address: Peter-Doerfler-Str. 13-25 86199 Augsburg, Germany

      Manufacturer Overview

      HOSOKAWA ALPINE Group, established in 1898 and headquartered in Augsburg, Germany, is a manufacturer of machinery and systems that handle powders, granulates, bulk materials, and blown film extrusion. Its product portfolio includes Pre-crushers, Granulators and shredders, Hammer mills, Flake crushers, and Table roller mills. These solutions find applications in powder processing and film extrusion, offering effective preparation methods for various materials. With over a century of experience, the company is known in the industry, and provides advanced equipment for diverse industrial needs.

    • International Fluides Controles

      • International Fluides Controles
        valves

      • France Address: 12, Rue Joliot Curie Petit Couronne, France

      Manufacturer Overview

      International Fluides Controles, established in 1986 and headquartered in France, is a manufacturer and distributor of industrial valve products, including valves, taps, and dampers. The company's products include wafer butterflies, knife gates, and check valves, offering customized designs and various actuators such as pneumatic, electric, and hydraulic. It provides solutions for fluid shut-off control in high-pressure and high-viscosity environments. Its products are used in water treatment, air and gas regulation, and power station industries. The company ensures product adaptability with different actuators and provides tightness tests, on-site diagnosis, and a substantial stock of products and spare parts services.

    • Wenzhou Solid Mechanical Equipment Co., Ltd

      • Wenzhou Solid Mechanical Equipment Co., Ltd
        Valves

      • China Address: No.168, Dongou Street, Wenzhou, China

      Manufacturer Overview

      Wenzhou Solid Mechanical Equipment Co., Ltd., established in 1989 and headquartered in Wenzhou, China, is a manufacturer of hydraulic pumps, oil pumps, and valves. The company offers a range of products, including high and medium-pressure vane pumps, gear pumps, piston pumps, lubricating oil pumps, and more. It also offers centrifugal pumps, diaphragm pumps, butterfly valves, and globe valves. Its lubricating oil pumps allow the pump to start operating without the need for additional oil when the machine is opened. Additionally, it has achieved ISO 90001 certification. The company exports its products to North America, South America, and Western Europe.

      • Winan Industrial Limited
        Valves

      • China Address: No.17 -1, Fengshun Road, Tongle, Longgang District, Shenzhen City, Guangdong, China

      Manufacturer Overview

      Winan Industrial Limited is a Chinese manufacturer of firefighting equipment established in 1995 and based in Shenzhen city, Guangdong. The company's products include automated fire monitors, foam bladder tanks, hoses, specialized valves, and foam inductors. It also offers complete fire suits and consumables, such as foam concentrate, automatic fire extinguisher balls, and conventional fire extinguishers. The company's products are chiefly used in Chinese petrochemical facilities, airports, marine ports, and power distribution locations.

    • TPS-Technitube Röhrenwerke GmbH

      • TPS-Technitube Röhrenwerke GmbH
        VALVES

      • Germany Address: Julius-Saxler-Str. 7 Daun, Germany

      Manufacturer Overview

      TPS-Technitube Röhrenwerke GmbH, established in 1973 and headquartered in Daun, Germany, is a manufacturer and stockist that specializes in steel and tube products. The company offers a wide range of products, including seamless tubes, flanges, fittings, valves, and heat exchanger tube stock. It also provides oilfield tubing such as tubing, casing, and drill pipe. Its products offer surface finish quality with no weld seam, ensuring high-pressure resistance and a smooth flow of fluids. The company has achieved ISO 9001:2015 and IATF 16949:2016 certification. It serves industries such as oil and gas, chemical, automotive, semiconductor, and more.

    • KEIHIN CO., LTD
      • Japan Address: 1-1-6 Higashi Kanagawa, Kanagawa-ku, Yokohama-shi, Kanagawa, Japan

      Manufacturer Overview

      KEIHIN CO., LTD, founded in Japan, in 1953 is a manufacturer of industrial valves. The company's product portfolio includes ball valves, ate valves used for isolating and regulating the flow of liquids, gases, and slurry, Check Valves, Pressure Relief Valves, and diaphragm valves used for sterile and aseptic applications in the pharmaceutical and food industries.Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense.

    • Nihon Pisco Co., Ltd.
      • Japan Address: 3-9-32 Osachiizuhaya, Okaya, Nagano, Japan

      Manufacturer Overview

      Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.

    • Asahi Organic Chemicals Industry
      • Japan Address: 21st Floor Ueno Frontier Tower 3-24-6 Ueno Taito-ku, Tokyo, Japan

      Manufacturer Overview

      ASAHI YUKIZAI CORPORATION, formerly known as Asahi Organic Chemicals Industry, is a Japanese manufacturer headquartered in Taito-ku, Tokyo, and specializes in resins and plastic valves since its establishment in 1945. The company manufactures valve and piping systems, including manual & automatic valves, pipes, fittings, and mixers. It also offers various foundry materials such as resin and sand products for casting, along with functional resins which cater to housing, construction, and industrial applications. The company engages in the design and construction of water utility facilities & reuse of wastewater, industrial water & wastewater treatment, environmental pollution prevention & purification, and public sewage management.

    • CKD
      • Japan Address: 250, Ouji 2-chome, Komaki, Aichi, Japan

      Manufacturer Overview

      CKD Corporation, established in 1943 under the name of Japan Aircraft Electric Co., Ltd., is a Japanese manufacturer of automation machinery and manufacturing components, headquartered in Komaki, Aichi. Their diverse portfolio includes pneumatic and fluid control components, fine system components, drive components, and labor-saving components. The company has also developed various types of automation machinery, such as transparent object inspection systems, pharmaceutical products packaging machines, and more. These products find applications in various industries, for example their automated food packaging systems are designed for maintaining food quality and hygienic conditions. Their fluid control components are used in the solar cell manufacturing process.

    • Fujikin
      • Japan Address: 2-3-2 Itachibori Nishi-ku, Osaka, Japan

      Manufacturer Overview

      Fujikin was founded in 1930 and headquartered in Itachibori Nishi-ku, Osaka, Japan is a manufacturer of specialized valve equipment. The company offers a wide variety of valves including Ultra-precision valves for semiconductor manufacturing, Cryogenic ultra-precision valves for space exploration, Aseptic process valves for pharmaceutical and food manufacturing, valves for new energy and rechargeable batteries, and valves for nuclear power plant instrumentation. Additionally, the company has diversified its portfolio to include the development of cutting-edge medical equipment. This expansion includes the creation of ultrasonic diagnostic equipment, universal X-ray photography devices, telemedicine systems, and healthcare monitoring devices.

    • SMC Corporation.
      • Japan Address: Akihabara UDX15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo, Japan

      Manufacturer Overview

      SMC corporation was founded in 1959 and is headquartered in Tokyo, Japan. SMC Corporation manufactures and sells automatic control equipment and filtration equipment. SMC has production facilities in 30 countries, technical development centers in Japan, the United States, Europe, and China, and sales offices, globally. SMC product lines divided by them include filter replacements, condensation prevention, heat resistance, thermos-chilling, and others. SMC provides a video library as well as product selection guide to assist customers in finding solutions and optimizing product efficiency.

    • Stäubli International AG.
      • Switzerland Address: Poststrasse 5, Pfäffikon, Schwyz, Switzerland

      Manufacturer Overview

      Stäubli began in Horgen, Switzerland in 1892. Stäubli designs, produces, distributes, and provides support for products for numerous industries including aerospace, alternative fuels, medical devices, packaging, photovoltaics, and semiconductors. Stäubli has 4 primary product lines including electrical connectors, fluid connectors, robotics, and textile. Electrical connector products include cable couplers, modular connectors, and test and measurement connectors. Fluid connectors include mold clamping systems, quick and dry disconnect couplings, and safety breakaway couplings. Robotics include industrial robots, collaborative robots, and mobile robots. Textile includes weaving preparation and frame weaving.

    • IPEX
      • Canada Address: 1425 North Service Rd East, Unit 3, Oakville, Ontario, Canada

      Manufacturer Overview

      IPEX by Aliaxis is headquartered in Oakville, Ontario. IPEX is a producer of pipe-related solutions defined in 6 categories: municipal, plumbing & mechanical, industrial, electrical, PE electrofusion, and irrigation. The company's municipal solutions include pressure piping and sewer piping systems in addition to specialty products. Plumbing & Mechanical solutions also include fire protection, gas venting systems, and potable water systems. Compressed air and acid waste systems are used in industrial systems. Light fixtures and ducts are keystones of the electrical solutions segment.

    • XHnotion
      • China Address: 1204, Rihuguomao, Jiangbei District, Ningbo, Zhejiang, China

      Manufacturer Overview

      Ningbo Xhnotion Pneumatic Technology Co., established in 2007, is a manufacturer of pneumatic power products based in Ningbo, China. The company’s main products include solenoid valves, mechanical valves, pneumatic and metal tube fittings, air tubings, and more. These products are used in many fields such as industrial drive, new energy, railway transportation, and power quality field. With a high-class standard reflected in its ISO 9001:2015 certification and CE, ROHS, REACH certificates, it has developed into a dependable partner for international established clients.

      • India Address: Plot No. C/6, Survey No. 906/2, Krishna Industrial Estate -II, Amli, Silvassa, Dadra and Nagar Haveli and Daman and Diu, India

      Manufacturer Overview

      GCL GLOBAL PLASTICS is a manufacturer of plastic pipes, fittings, and other plastic products. The company is headquartered in Silvassa, India, and was established in 1996. The company offers a wide range of plastic pipes, including ube pipes and fittings, tapes and labels, plastic fitting and accessories, film, foil and garbage, and LED lighting. It offers a wide range of plastic fittings, including elbows, tees, and couplings. GCL's products are used in the water supply, irrigation, and construction industries. The company has an online shop services that includes packaging shipments and making deliveries of all orders to customer across India.

    • Seven Ocean Hydraulics
      • Taiwan Address: No. 26, Gongye 10th Road, Dali District, Taichung City, Taiwan

      Manufacturer Overview

      Seven Ocean Hydraulics, founded in Taiwan, in 1989 is a manufacturer of hydraulic valves and hydraulic power systems. The company's product portfolio includes Control Valves,Relief Valves, Reducing Valves, Motor Pumps, and Hydraulic Power Units. Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense. The company also provides services including national distribution, product selection, installation, preventative maintenance, troubleshooting, repair and customer service.

    • OMKAR VALVES PVT. LTD.
      • India Address: S. No. 14 / 2A / 1, Katraj - Gujarwadi Road Near Ashvi Trading Co., Mangdewadi, Tal. Haveli, Dist. Pune, Maharashtra, India

      Manufacturer Overview

      OMKAR VALVES PVT. LTD., established in 1996 and headquartered in Maharashtra, India, is a manufacturer of butterfly and check valves. The company offers a wide range of butterfly valves, including hand-lever-operated butterfly, gear-operated butterfly, and double-flanged butterfly valves. It also offers various check valves, including wafer-type check and dual plate check valves. The company's products are useful in multiple areas, including the water treatment, chemical, and power industries.

    • Ranger Caradoc
      • United Kingdom Address: Unit 40 Siddons Industrial Estate, Howard Street, Hill Top, West Bromwich, Staffordshire, United Kingdom

      Manufacturer Overview

      Ranger Caradoc Hydraulics Ltd. is a specialized designer, manufacturer, and supplier of hydraulic components and systems. The company is headquartered in West Bromwich, United Kingdom and has been in operation since 1977. Ranger Caradoc offers a wide range of products, including hydraulic cylinders, hydraulic pumps, hydraulic valves, and hydraulic hoses. The company also offers various services, such as hydraulic system design, hydraulic cylinder design, engineering expertise and custom hydraulic kits. Ranger Caradoc's products are used in diverse industries, including the construction, agriculture, and mining industries.

    • Janatics
      • India Address: E - 25, SIDCO Industrial Estate, Kurichi, Coimbatore, Tamil Nadu, India

      Manufacturer Overview

      Established in 1977, and based in Tamilnadu, India, Janatics is a manufacturer and supplier of cylinders and valves for various industries. The company was awarded in the years 1984, 1994, 2002, 2008, and 2014 by various organizations and the government. They produce Air cylinders, Directional Control Valves, Air Line Valves, Air Preparation Units, and, One Touch Fittings. The company also produces Tubes&Accessories, Air Preparation Units NPT, and, Directional Control Valves NPT, which have applications in Textile and Power Industries.

    • Weidouli Valves Co., Ltd.
      • China Address: No.20, Xingyu Road, Airport Industrial Zone, Wenzhou city, Zhejiang, China

      Manufacturer Overview

      Weidouli Valves Co., Ltd. is a manufacturer of high alloy valves that was founded in 1989 and headquartered in Wenzhou, China. The company offers a wide range of valves, including ball valves, butterfly valves, gate valves, globe valves, and plug valves. Weidouli Valves also offers numerous services, such as system design, engineering, and installation. Its products such as WSV Manual Valve, TZNT Control Valve and Valve Materials are used in numerous industries, including the oil and gas, chemical, and water treatment industries. Its valve materials include Titanium, Nickel, Monel, Hastelloy and Inconel Valves.

    • tecofi.fr

      Manufacturer Overview

      TECOFI, founded in 1985 and based in Corbas, France, is a manufacturer of industrial valves and fittings. Its product range includes butterfly valves for fluid control, knife gate valves for handling thick fluids, resilient seat gate valves used in flow regulation, ball valves for precise control applications, and check valves to prevent backflow. Its products are used in industries such as water and wastewater treatment, power generation, oil and gas, and chemicals. The company is known for its expertise in valve design and production.

    • KITZ SCT CORPORATION

      • KITZ SCT CORPORATION
        valve

      Manufacturer Overview

      KITZ SCT Corporation, established in 1951 and based in Japan, is a manufacturer of fluid control devices and equipment. The company produces products such as ultra-high purity gas valves, vacuum exhaust valves, fittings, and thermoplastic valves and supplies to semiconductor manufacturing processes. With 12 companies in Asia, America, and Europe, the company manufactures products used in different phases of semiconductor and FPD manufacturing. All its products are designed according to the ISO 9001 quality standards.

    • SPX Flow

      Manufacturer Overview

      SPX Flow, established in 1912, is a manufacturer of industrial machinery to solve processing challenges based in Charlotte, North Carolina. The company manufactures various machinery such as mixers, pumps, valves, homogenizers, and heat exchangers. The machinery is used in nutrition, health, mining, construction, and chemical industries. The company provides services such as designing, engineering, and installing turnkey process units or full-scale plants. The SPX Flow brands include Anhydro, Bran+Luebbe, Gerstenberg Schrӧder, Pneumatic Products and Seital Separation.

    • BRANDONI S.P.A.

      Manufacturer Overview

      Brandoni Valves, established in 1961, and based in Piedmont, Italy, is a manufacturer of industrial valves. Its diverse product line encompasses shut-off valves, check valves, joints, solenoid valves, and actuators. These quality products find application across diverse industries like water treatment, power generation, oil and gas, and chemical processing. The company's precision-crafted products are tailored to control and regulate fluid and gas flow, ensuring efficiency and quality in critical processes.

    • Lynch Fluid Controls, Inc.

      Manufacturer Overview

      Lynch Fluid Controls Inc., founded in 1987 and operating as a division of the Lynch Group of Companies, is a Canadian manufacturer based in Mississauga, Ontario, providing hydraulic and motion control systems and components. The company, supported by two fully automated manufacturing facilities, produces custom and integrated manifolds, like bar manifolds and related accessories, made from various materials, such as aluminum, ductile iron, and stainless steel. It also offers a range of hydraulic components and valve-pack assemblies. The company is certified by AS9100D and ISO 9001:2015 and serves various industries, including aerospace, construction, and mining.

    • Ingenieur-Büro Kötter GmbH

      Manufacturer Overview

      Ingenieur-Büro Kötter GmbH (IBK), established in 1982 and headquartered in Leveloh. Sprockhövel, Germany, is a spray and surface painting component, equipment, and systems designer and manufacturer. The company offers a portfolio of portable "ready-to-work" modular spray systems that cover all different types of surface technologies as well as the individual components, such as spray guns, pumps, and liquid agitators. The modular engineering of its spray system components allows for easy customization by clients as well as the creation of custom components and systems for OEMs.

    • Düker GmbH

      Manufacturer Overview

      Düker GmbH, established in 1951 and headquartered in Karlstadt, Germany, is a manufacturer that specializes in providing sustainable solutions for flow control and drainage. The company offers a wide range of products, including cast iron pipe systems, couplings, fire protection, gate valves, and more. It also provides hydrants, pressure fittings, wastewater, and plunger valves. Its products are designed to improve the quality of life in buildings. The company has received ISO 9001:2015 and LEED certifications. It serves a range of industries, including chemical, construction, pharmaceutical, waste disposal, and more.

    • OUMING VALVE GROUP CO.,LTD.

      Manufacturer Overview

      OUMING VALVE GROUP CO. LTD. is a manufacturer of stainless steel valves and related products that was established in 1983 in Zhejiang, China. The company primarily produces piece ball valves, multi-port ball valves, and automatic ball valves for regulating or controlling the flow of liquids. It also offers various pipe fittings and castings, as well as custom design and manufacturing services for unique projects. The company is certified to CE, API6D, and API607 standards, chiefly serving clients in the natural gas, chemical processing, and water treatment industries.

    • Rees-Memphis, Inc.

      Manufacturer Overview

      Rees-Memphis is based in Memphis, Tennessee. REES designs, manufactures, and installs industrial air systems providing industrial dust collection, pneumatic conveying, and ventilation solutions for a variety of processing industries such as food, pharmaceuticals, textiles, and ceramics. REES offers a full line of standard products and custom fabrication. Product examples span lines of production including feed hoppers, pneumatic receivers, machine guards, and housing. REES builds complete systems such as dust collection, conveying, grinding, and transfer of wood pellets for lumber mills and dust collection facilities for large automobile factories. REES offers additional services such as surveying, designing, installing, maintenance, repair, and rebuilding.

    • Oil-Rite Corporation

      Manufacturer Overview

      Oil-Rite Corporation was founded in 1933 and is based in Manitowoc, Wisconsin. Oil-Rite is a designer and manufacturer of lubrication equipment used in industries as diverse as automotive, machining, and baking, as well as hydroelectric dams. Oil-Rite’s featured products include constant level lubricators, level gages, feed valves, and oil systems. Additional products include grease and oil dispensers, various valves, and sights. Oil-Rite also offers support including usage, lubrication levels, maintenance, and product selection for specific needs.

    • Mako Products LLC

      Manufacturer Overview

      Mako Products LLC manufactures and supplies quality fluid system components, including Superlok compression tube fittings, a patented product popular for its perfect fitting. The company's other products include threaded needle valves, ball valves, JIC fittings & adapters, stainless steel tubing, and related products. The company was founded in 2012 and is based in Oklahoma, USA. Their products are designed for various industries, including petrochemical, shipbuilding and maritime, semiconductors, aerospace, and biopharmaceuticals.

    • Hays Fluid Controls

      Manufacturer Overview

      Hays Fluid Controls, since 1963, has been a supplier of valves such as auto & manual balancing valves, low-temperature valves, temperature control valves, industrial solenoid valves, and lead-free valves to the US Navy. Hose kits, piping packages, strainers, and valve actuators are produced for the equipment in office buildings, supermarkets, schools, hospitals, and commercial marine vessels. The company in East Fields Street, Dallas, NC, offers tools such as velocity calculators, pressure drop calculators, online price guides, and shipping status with same-day shipping.

    • Haskel International

      Manufacturer Overview

      Haskel began in 1954 and is now part of Ingersoll Rand. Haskel is a designer and manufacturer of high-pressure industrial gas and liquid handling equipment in three categories: hydrogen refueling, products, and aftermarket. Hydrogen refueling includes, refueling stations, hydrogen compressors, hydrogen compression and transfer, hydrogen valves fitting and tubing. Products include liquid pumps, refrigerant pumps, gas boost compressors, air pressure amplifiers, packaged systems, spare parts, system components, and high pressure valves. Aftermarket support includes support for hydrogen stations, repair, maintenance, service, and spare parts.

    • Emerson Electric Co.

      Manufacturer Overview

      Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.

    • Dk-Lok U.S.A.

      Manufacturer Overview

      DK-Lok USA was established in 2010 and is the U.S.-based subsidiary of South Korean industrial parts maker, DK-Lok. DK-Lok serves industries such as offshore & onshore oil production, automotive & hydrogen fuel cells, shipbuilding & marine engines, petrochemicals & refinery, power plant, railway vehicles, and semiconductors. DK-Lok USA’s primary offerings are valves, fittings, regulators, hose, tubing, quick connectors, and tools such as hydraulic swaging units, electric swaging units, presaging tools, and tube & hose.

    • Crane Instrumentation & Sampling PFT Corp.

      Manufacturer Overview

      Hoke was founded in 1925 in Queens, New York as a gas flow control valve manufacturer for jeweler’s torches. The ISO 9001-certified company has grown to become a manufacturer of many parts for alternative fuel markets, chemicals, petrochemicals, paper, and power generation markets. The company produces multiple varieties of valves, fittings, actuators, cylinders, and other products designed to specific pressure and temperature standards. The company offers CAD products for valves, actuators, and other products to assist in product design and selection.

    • BELIMO AIRCONTROLS Inc.

      Manufacturer Overview

      Belimo Aircontrols Inc. is based in Danbury, Connecticut, USA, and is a manufacturer of HVAC products that was established in 1984 as a subsidiary of the Swiss company Belimo Holding AG. The company’s products include control valves for regulating the flow of water or steam in HVAC systems, damper actuators for controlling air damper shutters, and sensors for monitoring temperature, humidity, or air quality. The company is ISO 9001 and ISO 14001-certified, and provides additional retrofitting services to clients requiring additional assistance.

    • Ningbo New Jiaxing Automatic Industry Co.,Ltd

      • Ningbo New Jiaxing Automatic Industry Co.,Ltd
        Hand Valve

      Manufacturer Overview

      Founded in 1979, and located in Shangshan, China, Ningbo New Jiaxing Automatic Industry Co., Ltd (JXPC)is a manufacturer of Solenoid valves, Pneumatic cylinders, PU tubes, and Air guns that have applications in various industries. The company provides air cylinders in different types according to the requirements of the particular markets. They also provide Pneumatic Accessories that involve Pneumatic Fittings in different sizes, shapes, and materials. They offer Pneumatic Tubing, Directional Valves, Fuild Process Valves, ST Series Shuttle Valves, and Air Source Treatment Units. The company's products have applications in machinery manufacturing, construction, Energy, and Electrical industries.

    • KOSA CORP
      • China Address: No.2651, Waiqingsong Road, Baihe Town Qingpu District, Shanghai, China

      Company Overview

      KOSA Corp, operates as a manufacturer and supplier of industrial control valves, headquartered in Qingpu District, Shanghai, China. The company specializes in the production, research and development, sales, and services of industrial control valves. Its product offerings include a pneumatic diaphragm control valve, electric regulator valve, electronic control valve, self-operated regulating valve, and ultra-small flow regulating valve. These products are generally used for controlling the flow of liquids or gases. It has received the API6D certification from the American Petroleum Institute for its adherence to quality and safety in the production of its products.

    • Praher Plastics Austria GmbH

      • Praher Plastics Austria GmbH
        Valves

      • Austria Address: Poneggenstrasse 5, Schwertberg, Austria

      Company Overview

      Praher Plastics Austria GmbH is a manufacturer and distributor of industrial piping system products made from technical plastics that was established in Schwertberg, Austria, in 1971. The company produces unplasticized PVC (PVC-U) pipes, fittings, and accessories for a range of industrial applications. It also offers various valves, such as diaphragm, check, and multiport models of different sizes and series. The company is certified to ISO 9001 standards, and chiefly serves clients in Austria’s industrial chemical, water treatment, and biotech industries.

    • Ezi-Dock™ Systems Ltd
      • United Kingdom Address: Park Court Park Lane Business Park Kirkby in Ashfield Notts NG17 9GU, United Kingdom

      Company Overview

      Ezi-Dock Systems Ltd is a manufacturer and supplier of life science products and equipment established in 2003 and located in Nottinghamshire, England, United Kingdom. The company offers flexible intermediate bulk container (FIBC) dust-free handling systems for maintaining sterility of transported materials, and high-containment transfer systems for handling pharmaceutical ingredients or catalysts. It also offers single-use valves and related fittings for Flexitank or Bag-in-Box applications. The company’s products are commonly used in the laboratory, pharmaceutical, and healthcare industries.

    • VELO ACCIAI S.R.L.

      • VELO ACCIAI S.R.L.
        VALVES

      • Italy Address: Via S. Lorenzo, 42 - Loc. Ca' Rainati S. Zenone degli Ezzelini, Italy

      Company Overview

      VELO ACCIAI S.R.L. is based in Ezzelini, Treviso, Italy, and is an OHSAS 18001-certified manufacturer of industrial fittings that was established in 1980 as a sister company to VLS Technologies. The company offers stainless steel fittings for regulating or connecting fluid movement networks, as well as catwalks and stairs for height access or positioning. It also offers related stainless steel components for customizing or optimizing fluid network installations. The company’s products are used mainly by clients in the chemical processing, recreational beverages, and petrol industries.

    • Sure Flow Equipment, Inc.
      • Canada Address: 5010 North Service Road, Burlington, Ontario, Canada

      Company Overview

      Sure Flow Equipment, Inc. is headquartered in Burlington, Ontario. Sure Flow Equipment is an ISO 9001:2015 certified manufacturer and distributor of industrial valves, strainers, and other fluid control machines used across industries. Sure Flow Equipment’s product lines include various strainers including duplex strainers, valves butterfly valves, bleed rings, joints, and other parts. Sure Flow Equipment provides resources such as videos, technical information, and usage guides to assist customers in installation and operation.

    • Wharton Hardware and Supply

      Company Overview

      Wharton Hardware and Supply is a family-operated business that was founded in 1948 in Philadelphia, Pennsylvania and has branched to several locations across the United States. Wharton operates in 3 segments: products, sales & rental, and services. The products segment includes road & bridge concrete accessories, safety equipment, abrasives and cutting tool products, plumbing-related products, topological products, fasteners, bits and drill equipment, as well as power tools. The sales & rental segment offers heavy duty construction equipment from major brands. The services segment includes repair and testing for tools and equipment.

    • Tank Truck Service & Sales, Inc.

      Company Overview

      Tank Truck Service & Sales, Inc. has been designing and building tank trucks since 1948 and is based in Warren, Michigan. The company is a manufacturer, assembler, and distributor of tank trucks and trailers. The company's product offerings include parts and components including tank truck equipment, bulk plant and storage tank equipment, dry break or dry disconnect fittings, valves, hose, hose reels, meters, swivel joints, gaskets, and pipe sealants. Tank truck offerings include refined fuel trucks and trailers, LGP trucks, and specialty tank trucks. Additionally, The company offers metalwork, equipment work, dot testing, paintwork, and sensor repairs.

    • Resato North America LLC

      Company Overview

      Resato B.V. was founded in the 1990s in Assen in the Netherlands. Resato is a distributor off high pressure technology products used for cutting, pressure testing, controlling, injection, compression, filling, and forming. Resato’s product categories include waterjet cutting technology used in jobshops, automotive, and aerospace industries. Waterjet tools include cutting tables, cutting heads, cutting pumps, abrasive management, and software. High pressure technology products are used in the oil & gas industries and industrial sectors. Hydrogen testing and hydrogen refueling-related products and services are also available.

    • PARKER HANNIFIN CORP

      Company Overview

      Parker Hannifin Corporation was founded in 1917 and is headquartered in Cleveland, Ohio. Parker Hannifin is a manufacturer and distributor of motion and control technologies and systems for markets including mobile, industrial, and aerospace. Parker-Hannifin operates through two segments: diversified industrial and aerospace systems. Diversified industrial offers sealing, shielding, thermal products and systems, adhesives, diagnostics solutions, and hydraulic, pneumatic, and elctromechanical components and systems or industrial machinery and equipment. The aerospace segment offers control actuation systems and components, engine exhaust nozzles and assemblies, pilot controls, as well as others.

    • Lumaco

      Company Overview

      Lumaco, established in 1961, and headquartered in Hackensack, New Jersey, is a supplier and distributor of valves and valve components for various industries. The company offers a range of products, such as doubledisk valves, butterfly valves, check valves, and pressure relief valves in which their valve solutions cater to industries such as food and beverages, and dairy industry. Lumaco's valves and components are designed for flow control, regulation, and isolation, ensuring efficient and safe operation in industrial applications. Lumaco prioritizes quality and delivers industry-standard valve solutions to meet their customers' needs.

    • Jason Industrial

      Company Overview

      Jason Industrial was founded in 1958 in Fairfield, New Jersey. Today, Jason Industrial is the hose division of AMMEGA and manufactures a range of both industrial and hydraulic hose, couplings, equipment, and accessories. Jason Industrial products are designed for the industries in which they serve including agriculture, chemical, HVAC, material handling, and mining. Jason Industrial's product lines include industrial hose products, hydraulic hose products, agricultural hoses, skateboard products, and belts. Jason Industrial also provides guides and resources for distributors and end users.

    • Jamieson Equipment Co., Inc.

      Company Overview

      Jamieson Equipment Company (JEC) was founded in 1982 and located in the state of Georgia. JEC serves infrastructure-related industries including pavement with concrete, aggregate, and asphalt, chemicals, sewage and waste management, and agriculture and food. JEC sells, installs, retrofits, repairs, and offers training and troubleshooting for a range of components and tools from simple fittings to motion sensors to electronics to valves to actuators, cranes, mixers, silos, hoppers, and plants.

    • FLSmidth, Inc.

      Company Overview

      Important Papers, Inc. was founded by Ruth Barnett in South Jersey in the early 1990s. Important Papers is a distributor of promotional items and custom apparel for company promotion. Examples of Important Papers, Inc. promotional items include: apparel such as t-shirts, office wear, outerwear, bottoms, sunglasses, and activewear; headwear such as caps, hats, beanies, visors, safety items, and bandanas; bags such as tote, backpacks, office & school, outdoor & fitness, and travel; drinkware, fun, health, office, tech, writing, and other miscellaneous items.

    • Caylor Industrial Sales, Inc.

      Company Overview

      Caylor Indstrial Sales, Inc. was founded in Dalton, Georgia in 1980. Today, Calor serves a number of sectors of the industrial market, in particular engineering, construction, manufacturing, paper mills, and chemical plants. The company is a distributor of many industrial components including valves, fittings, pipe and tube hangers, actuators, and water, steam, and air regulators. The company also offers services as a manufacturer of both low and high-volume production custom parts using a variety of materials including steel, stainless steel, aluminum, brass, Delrin, and Lexan.

    • Advanced Fluid Systems, Inc.

      Company Overview

      Advanced Fluid Systems was founded in 1985 and is based in York, Pennsylvania. The company is a distributor of fluid systems and provides planning, designing, engineering, and manufacturing services for customers. The company serves power generation facilities, industrial and manufacturing, and marine and mobile markets. The company has 7 product lines, ranging from simple motion controls to integrated manifolds, all the way up to hydraulic systems and power units, and power generation solutions. The company’s field services include installation, preventative maintenance, and repair.

    • WIKA Alexander Wiegand SE & Co. KG
      • Germany Address: Alexander-Wiegand-Str. 30,Klingenberg, Saxony, Germany

      Company Overview

      WIKA Group was founded in 1946 and is headquartered in Klingenberg, Germany. The company serves industries such as food and beverage, power generation, refrigeration, and semiconductor, but is primarily known for medical equipment. The company’s six primary product market segments are Pressure, Temperature, Level, Force, Flow, and Calibration. In addition, the company offers Industrial IoT services including conditional monitoring and alarming, asset tracking, predictive maintenance, and process automation. The company also offers standard calibration, repair, and consultancy services in addition to providing online tools for customer assistance.

    • SMC Corporation of America

      Company Overview

      SMC Corporation of America, established in 1977 and located in Noblesville, Indiana, is a manufacturer of pneumatic equipment and motion control products used in the automation, controls, and process industries. It is the North American subsidiary of Japan’s SMC Corporation, and it offers a broad range of products, including actuators, directional control valves, and airline equipment. The company is ISO 14001 and ISO 9001 certified and has an education division that teaches technical skills and the latest developments in industrial automation. It also runs a sales development program for training outside sales at the company.

    • Xi'an Parri Control Technology Co.,Ltd.
      • China Address: No. 2618, Lugang Building, Xi'an International Trade & Logistics Park, Xi'an City, Shaanxi, China

      Distributor Overview

      Xi'an Parri Control Technology Co., Ltd. is a supplier specializing in the research and development, design, manufacturing and sale of control technology solutions such as valves, actuators and safety jackets, that was founded in 2008 and is headquartered in Xi'an, China. The company’s product range, includes manual-operated valves, actuated valves, pneumatic actuators, intelligent electric actuators, and intelligent electro-pneumatic valve positioners. The company also offers numerous services, such as system design, engineering, and installation. Xi'an Parri Control Technology's products are used in numerous industries, including the oil and gas, chemical, and water treatment industries.

    • Holmatro, Inc

      Distributor Overview

      Holmatro, Inc., founded in the Netherlands in 1967, is a global supplier of high-pressure hydraulic rescue tools. The company has manufacturing facilities in the United States and the Netherlands. It serves customers worldwide, with divisions located in the Netherlands, USA, and China. Its products are predominantly used in rescue, special tactics, and industrial applications, ensuring effective and safe tools under all circumstances. It has centralized its research & development and product management teams in the Netherlands to ensure superior products. Its state-of-the-art manufacturing facilities are located in the Netherlands and in the USA.

    • Maximator GmbH

      Distributor Overview

      Maximator GmbH, established in 1885 and headquartered in Nordhausen, Germany, is a supplier of high-pressure technology, testing technology, hydraulics, pneumatics as well as hydrogen technology. The company offers a range of products, from fittings to modular gas compressor systems. It also offers customer-oriented services such as burst pressure, autofrettage of components, and a large number of inspections on CNG. Its pumps are rugged, rebuildable, and can tolerate all installation positions. The company has TÜV certification for its valves, fittings, and tubing, serving diverse industries, including automotive, energy, chemical, and semiconductor industries.

    • United P & H Supply Co.

      Distributor Overview

      United P&H Supply Company was founded in Milwaukee, Wisconsin in 1922. United is a distributor of industrial PPVF, sanitary, and technical products for several markets including biotech, primary metals, shipbuilding, commercial construction, and healthcare facilities. The company's product offerings include pipe & tube, pumps, flow instrumentation, pressure and temperature controls, and tank devices. Additionally, the company offers services including valve automation, vendor-managed inventory, and EDI to ensure proper order fulfillment, delivery, and product operation.

    • Tri-State Bearing Company, Inc.

      Distributor Overview

      Tri-State Bearing Company was founded in 1950 and is headquartered in Evansville, Indiana. The company is an independently owned and operated distributor of a full line of bearings, mechanical power transmission, and motion control products to customers across North America in the agricultural, automotive, manufacturing, and pharmaceutical industries. The company has several product lines such as chains & sprockets, clutches & breaks, and couplings in addition to its namesake of bearings. The company also offers services such as custom-length modifications of certain components such as roller chains, electronic repair of drivers and controllers, and on-site gearbox assembly.

    • PEP, A Ryan Herco Flow Solutions Company

      Distributor Overview

      Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.

    • Modern Fluid Power, Inc.

      Distributor Overview

      Modern Fluid Power Inc (MFP) was established in 1970 on the outskirts of Blanchester, Ohio. Modern Fluid Power is a distributor for specialized industrial equipment. Among MFP’s product lines are actuator parts, actuators, and actuator components, liquid levels, flow sights, thermometers, sight plugs, pressure gauges, & pressure switches, hydraulic cylinders, tube fittings, valves, hydraulic accessories, pipe fittings, pipe line strainers, backflow preventers, water gauges, directional control air valves, filters, regulators, lubricators, air cylinders, and ball, safety, relief, butterfly, solenoid, check, needle, gate, & globe valves.

    • Guenther Supply, Inc.

      Distributor Overview

      Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.

    • Green Rubber-Kennedy AG, LP

      Distributor Overview

      Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.

    • American Precision Supply, Inc.

      Distributor Overview

      American Precision Supply (APS) was founded in the 1980s and is based in Hampshire, Illinois. Hampshire distributes products that serve the chemical, biotech, wastewater, power generation, pharmaceutical, medical, commercial, food/beverage, municipal, education, and OEM markets. APS product offings include TLV steam products, control valves, steam traps, actuation, instrumentation, corruption resistant components, pipe fittings, commercial, sanitary, pipe, and steam and condensate components. APS offers precision pipe cutting, grooving, threading, custom lined pipe spools, inventory management programs, surveys, and valve repair.

Hand Operated Valve Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the hand operated valve page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. Fujikin: 5,858
  2. CKD: 4,660
  3. SPX Flow: 4,500

Newly Established Company

  1. Maedler North America: 2020 (4 years ago)
  2. XHnotion: 2007 (17 years ago)
  3. Yantai Jereh Petroleum Equipment & Technologies Co., Ltd.: 2004 (20 years ago)

Company with a History

  1. Bonney Forge Corporation: 1876 (148 years ago)
  2. Stäubli International AG.: 1892 (132 years ago)
  3. NIBCO INC.: 1904 (120 years ago)

Hand Operated Valve Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Hand Operated Valve Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
United States of America United States of America 75 67.6%
China China 8 7.2%
Japan Japan 7 6.3%
Italy Italy 6 5.4%
Germany Germany 3 2.7%
India India 3 2.7%
Canada Canada 2 1.8%
United Kingdom United Kingdom 2 1.8%
Netherlands Netherlands 1 0.9%
France France 1 0.9%
Switzerland Switzerland 1 0.9%
Taiwan Taiwan 1 0.9%
Austria Austria 1 0.9%

Related Products

Ball Valves
Throttle Valves
Quick Exhaust Valves
Air Release Valves
Butterfly Valves
Pinch Valves
Diaphragm Valve
Single Faucets
Diaphragm Valves
Valve Floats
Rotary Valves
Stem Valves
Spool Valves
Oil Pressure Regulators
Hydraulic Valves
Poppet Valves

Search from All Categories

1201 Sensors
1203 Test Equipment
1204 Motors
1205 Pumps
1206 Relays
1207 Testing Equipment
1208 Analyzers
1209 Diodes
1210 Measuring Equipment
1211 Observation Equipment
1212 Printers
1213 Capacitors
1214 Switches
1215 Robots
1216 Cameras
1217 Connectors
1218 Meters & Instruments
1219 Generators
1220 Light Sources
1221 Power Supplies
1222 FA Equipment
1223 Machining / Machine Tools
1224 Boards & Circuit Boards
1225 Transformers
1226 Integrated Circuits
1227 Cables
1228 Transistors
1229 Controllers
1230 Electromagnetic Countermeasures
1231 Surge Countermeasures
1232 Drive Mechanisms & Components
1233 Scanners
1234 Servers
1235 Magnetic Materials
1236 Amplifiers
1237 Semiconductor Manufacturing
1238 Metallic Materials
1239 Terminals / Interfaces
1240 Temperature Control
1241 Fastening Components
1242 Network-related Equipment
1243 Development & Design
1244 Safety Devices
1245 Input & Display Devices
1246 Polymeric Materials
1247 Optical Components
1248 Purification Equipment
1249 Storage Devices
1250 Fixtures
1251 Heat Sources
1252 Sealing Devices
1253 Storage Products
1255 Fittings
1256 Valves
1257 Gloves
1258 Sanitary
1259 Springs
1260 Conveyors
1261 Resistance / Load
1262 Filters
1264 Converters & Transducers
1267 Cleaning Agents & Equipment
1269 Protective Materials & Equipment
1270 Hoses / Tubes
1271 Clean Room Supplies
1273 Clamps & Fasteners
1274 Adhesives & Repair Materials
1278 Analysis Software
1279 Stages
1280 Freezers
1281 Terminals
1283 Nozzles
1284 Cooling Equipment
1285 Bio
1286 Separation and Extraction Equipment
1287 Lubricator-related Equipment
1288 Business Efficiency Systems / Software
1290 Coils
1291 Paints
1292 Inorganic & Mineral Materials
1293 Dryers
1294 Blowers
1295 Agitators
1296 Weighing Equipment
1298 Packing Materials
1299 Processing Services
1300 Testing Services
1301 Tools
1302 Elements
1303 Chemicals
1304 Pesticides
1305 Building Materials
1306 Agricultural Materials
1307 Painting Services
1308 Vehicle related
1309 Construction Machinery
1310 Ship related
1311 Aircraft
1312 Transport Vehicles
1313 Global Environment

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree