All Categories
History
This section provides an overview for programmable power supplies as well as their applications and principles. Also, please take a look at the list of 49 programmable power supply manufacturers and their company rankings. Here are the top-ranked programmable power supply companies as of December, 2024: 1.Pacific Power Source, Inc., 2.Teledyne LeCroy, 3.Labsphere, Inc..
Table of Contents
Categories Related to Programmable Power Supplies
A Programmable Power Supply is a power supply with an output that can be varied as desired.
General power supplies allow manual adjustment of output voltage and current settings. Programmable power supplies, however, are characterized by the ability to freely set output voltage, current, and frequency using commands from a controller.
Programmable power supplies are used for testing the characteristics of semiconductor devices and other electronic equipment. They are useful for automatically acquiring data or for investigating the response of a measurement object by gradually changing power supply conditions.
Particularly for applications that measure the voltage-current characteristics of semiconductors, there are dedicated measurement devices that house a high-precision Programmable Power Supply and a voltage-current measurement device in the same housing, which is controlled by a controller.
Recently, a product combining a large-capacity Programmable Power Supply and a measurement unit capable of evaluating power semiconductors has also been introduced.
Programmable Power Supplies are also being used in a wide range of other fields, from home appliances to aerospace, military, power generation, renewable energy, and more.
Basically, Programmable Power Supplies are a type of regulated power supply in which a reference voltage is set by a D/A converter and the corresponding voltage or current is output. When connected to a controller, the controller can change the output voltage/current by rewriting the data in the D/A converter.
Classified by power supply circuit configuration, the following types are available:
A DC power supply, also known as a linear power supply or series power supply, is characterized by its low output voltage noise.
They are mainly used in measurements where noise should be minimized, such as when handling minute signals. However, their power conversion efficiency is generally low and they generate a lot of heat, so heat dissipation measures are necessary.
The output voltage is compared with a reference voltage and is feedback controlled to always be a constant voltage.
Compared to the dropper type, the switching type DC power supply is more efficient and is currently the mainstream power supply. Although it is somewhat noisier, it generates less heat and can produce a large-capacity power supply, so it is also used in testing equipment that requires a large current, such as hybrid vehicles.
As with the dropper method, the output voltage is compared to a reference voltage and feedback control is performed to ensure that the voltage is always constant.
While the output voltage range of a typical Programmable Power Supply is in the tens of volts, there are power supplies that specialize in high-voltage output.
High-voltage Programmable Power Supplies, which can generate thousands to tens of thousands of volts DC, are used in the following applications:
However, they are rarely used alone and are often integrated into systems as part of the equipment.
Bipolar power supplies are capable of outputting not only direct current but also alternating current, and have a sink function as well as a source function for electric power. As a circuit configuration, it is a kind of power amplifier and can be used not only as a power source but also as an electronic load.
Because it is a power amplifier circuit, it can output AC power at relatively high frequencies, and in combination with a controller or signal generator, it can generate complex test waveforms. This is also used to measure power supply voltage fluctuation characteristics in various electronic devices and for driving tests of piezoelectric elements.
Voltage/current generators used as reference signals for calibration/inspection of digital multimeters that measure voltage and current, and various equipment on production lines are also part of Programmable Power Supplies.
Unlike ordinary power supplies, they require high precision in output voltage and current values, but the amount of power that can be output is not so critical.
The use of programmable power supplies in combination with controllers is possible, for example, to automatically acquire calibration data.
*Including some distributors, etc.
Sort by Features
Sort by Area
Teledyne LeCroy was founded in 1964 and is headquartered in Chestnut Ridge, New York, with sales, service, and development subsidiaries in the US and throughout Europe and Asia. The company serves a wide variety of industries including semiconductor & computer, consumer electronics, automotive, and telecommunications. The company’s product categories include oscilloscopes, electronic test equipment, protocol analysis solutions such as SATA and USB devices, modular data acquisition devices, and sensors and calibrators. The company provides services such as SSD testing, automotive and device interoperability testing, and technology training.
Pacific Power Source, Inc., established in Irvine, CA in 1971, is a manufacturer of AC power solutions that feature fast transient response and tight regulation. The company offers a wide range of products including AC Power Sources, Programmable Frequency Converters, and AC to AC Power Supplies, used in markets such as manufacturing, military, aerospace, aviation, and communication. The company has sales offices in the United States, Germany, the United Kingdom, and China.
Rohde and Shwarz, headquartered in Munich, Germany, is a technology business that creates, develops, and promotes innovative information and communication technology products for professionals. Customers all over the world rely on Rohde & Schwarz and its cutting-edge solutions in the test & measurement, secure communications, networks & cybersecurity, and broadcast & media areas. They were created in 1993 and have regional hubs in Asia and the United States.Rohde & Schwarz has invested heavily in emerging technologies such as artificial intelligence, the industrial internet of things (IIoT), 6G, cloud solutions, and quantum technology.
Founded in 1976 and headquartered in Austin, TX, National Instruments Corporation provides a software-centric platform and systems to engineers and scientists worldwide. NI’s software is used for automated test and measurement applications in manufacturing environment for configuring real-time testing application, sensor configuration and data logging of mixed signals, and monitoring ancillary rotating equipment. NI’s software also enables the mass coordination of connected devices, software deployments, and data communications throughout distributed systems. Recently, NI has begun to develop test systems and solutions for autonomous driving software and hardware validation.
Magna-Power Electronics, established in 1981 and headquartered in Flemington, New Jersey, USA, is a manufacturer of programmable DC power supplies, DC electronic loads, and custom power solutions. The company's product varieties offer robust precision, stability, and adaptability, providing benefits such as precise power control, energy efficiency, and the ability to simulate real-world operating conditions. It serves a wide range of industries, including aerospace, automotive, renewable energy, research, and industrial manufacturing. The solutions are vital in applications such as testing, development, and validation of electronics, electric vehicles, and alternative energy systems.
EEC (an Ikonix brand), established in 1978 and headquartered in Taipei, Taiwan, is a manufacturer of power devices and accessories. The company's core products include the 8500 AC power supply series, which provides an output voltage up to 310 VAC and an output frequency ranging from 5 Hz to 1,200 Hz, and the flexible 400X AC power supply series. It also offers rack and wall mounting accessories along with refurbished products. These products are used in laboratories, data system integration, and lighting systems. The company's services include equipment calibration, software updates, and repairs.
Chroma Systems Solutions, Inc., established in 1984 and headquartered in Foothill Ranch, USA, is a manufacturer of power test instruments and automated test systems. The company specializes in AC and DC power sources, electronic loads, measurement instruments as well as power meters, battery cyclers, and DC power supplies. It provides tailored engineering solutions for power conversion and electrical safety testing. The company’s battery test equipment features regenerative discharge systems, ideal for lithium-ion batteries and EV applications. Its products serve various industries, including commercial, aerospace, and medical. It also offers customer support services, including calibration, repair, and extended warranties.
B&K Precision Corporation, established in 1951 and headquartered in Yorba Linda, California, stands as a manufacturer and supplier of test and measurement instruments. Its offerings span various industries and applications, including power supplies and DC electronic loads for power testing, signal generators for signal creation, component testers for evaluating electronic components, oscilloscopes for signal waveform analysis, and spectrum analyzers for frequency spectrum measurement. These solutions provide more options for electronic system design and development across education, research, engineering, production, and maintenance sectors. The company holds ISO 9001:2015 certification for its quality management.
Acopian, founded in 1964 in Easton, Pennsylvania, USA, is a manufacturer and supplier of quality power conversion products. The company specializes in offering a wide range of power supplies, including AC-DC power supplies, DC-DC converters, and custom power solutions. These products play a vital role in providing efficient power to various electronic systems and applications. Acopian's power solutions are utilized across industries such as aerospace, medical, and telecommunications. Emphasizing precision and performance, Acopian continues to be an ideal partner in delivering stable and dependable power solutions for critical applications.
EA Elektro-Automatik, established in 1974 and headquartered in Viersen, Germany, is a manufacturer that specializes in power electronics for research and development and industrial applications. The company offers a wide range of products, including programmable DC power supplies and conventional, bidirectional, and regenerative DC Supplies and loads. It also offers DC electronics loads and high power density units. Its product automatically offers increased current at lower voltages, enabling a single supply to meet wider test requirements. The company has achieved ISO 9001:2015 certification for its quality management systems. It serves industries such as research and development, education, aerospace, and more.
Labsphere, established in 1979, is headquartered in North Sutton, New Hampshire, United States, and the company specializes in developing and producing advanced light measuring technologies tailored for the LED/SSL lighting sector. The company produces light measuring equipment designed for many industries like aerospace, automotive, electronic imaging, laser diode, LED, lighting, medical imaging, and optics. The company provides clients with a range of advanced technological solutions, including pulsed laser power measurement systems, ultraviolet light-emitting diode characterization systems, high-temperature spectroradiometers, tunable portable luminance test and calibration reference sources, and ultraviolet transmittance analyzers.
AMETEK Programmable Power, located in San Diego, California, is a manufacturer of precision power solutions founded in 1982. The company offers precision power supplies, electronic loads, power subsystems, compliance test solutions, and precision modular instrumentation for applications requiring precise power control, testing, and electronic signal monitoring. These products are used in various industries such as research and development, aerospace, defense, telecommunications, and automotive. The company holds and maintains ISO 9001:2015 certification, adhering to industry standards for its quality management system.
Applied Power Systems, Inc. (APS) was founded in 196 and headquartered in Hicksville, New York. Applied Power Systems is a power electronics company specializing in power conversion systems and thermal management of high power semiconductors. APS offers a large selection of high power thermal management products. These products include standard and custom aluminum extrusion heat sinks for natural convection and forced air-cooling. Cast and machined copper chill plates for liquid cooling. State of the art clamps for flat pack or hockey puck semiconductors. APS also offers driver circuit boards to drive SCR, IGBT and MOSFET devices.
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
Neeltran, which stands for New Energy Transformer and Rectifiers, is headquartered in New Milford, Connecticut. The company is now a part of AMSC and is an ISO-9001-2015 certified designer and manufacturer of its own rectifier transformers and DC rectifiers to customers around the world across diverse industries including aerospace, mining, and petrochemicals. In addition to transformers and DC rectifiers, the company produces reactors and inductors, and turn-key solutions. The company also offers repair, retrofit, rewind, and remanufacturing of rectifiers and transformers.
Pico Electronics was founded in 1967 and is headquartered in Pelham, New York. Pico is a developer of miniature and ultra-miniature electronics used in aerospace, power generation, and military applications. The company specializes in miniature transformers and inductors designed to work in extreme temperature environments ranging from -55°C to +85°C (-67°F to +185°F). Pico Electronics also specializes in continued miniaturization. Other product listings include DC-DC converters, AC-DC power supplies, and power factor-corrected modules. The company also produces QPL MIL Spec products to military grade specifications such as transformers and inductors.
AMADA WELD TECH is a subsidiary of AMADA WELD TECH Co., LTD, which was founded in 1972. AMADA is based in Southern California and is a manufacturer of equipment and systems for resistance welding, hot bar bonding, laser marking, and other laser cutting services for industries such as aerospace, automotive, electronics, medical, and photonics. AMADA is ISO 9001:2015 certified. Examples of AMADA products include machines and systems for resistance welding, laser cutting, hermetic steam sealing, laser micromachining, and more.
Keysight Technologies, Inc. was founded in 1939 and headquartered in Santa Rosa, California. Keysight is a global developer and manufacturer of electronic design and test solutions to communications, networking, aerospace, defense, and government, automotive, energy, semiconductor, electronic, and education industries. Keysight’s communications solutions group solutions include electronic design automation software; radio frequency and microwave test solutions, hardware and virtual network test platforms and software applications, as well as optical laser source solutions. Keysight’s electronic industrial solutions group offers various design tools and verification tools. Keysight offers product support, technical support, and training and consulting services. It sells its products through direct sales force, distributors, resellers, and manufacturer's representatives.
Versatile Power, established in 2002, is a designer, manufacturer, and supplier of power delivery systems and power supplies headquartered in Campbell, California. The company’s product portfolio includes programmable DC power supplies with a power range of 600W to 1500W. It also offers custom electronic subsystems for OEM manufacturers of lasers, ultrasonics, RFs, and DCs. The company has achieved the ISO 9001-2015 and 13485-2016 certifications and offers products used in medical, military, laboratory, telecommunications, industrial, and semiconductor applications.
Exponential Power has roots dating back to 1915 and began with the merger of Storage Battery Systems and Summit Power Systems in 2014, and is now headquartered in Menomonee Falls, Wisconsin. Exponential Power is a distributor of stored power solutions, serving offshore, telecom, energy-services, utilities, energy, data centers, motive power, material handling, distribution, and manufacturing industries. Exponential Power provides batteries, battery backs, power systems, battery cabinets, UPS, as well as other products. Exponential Power offers services such as installation, maintenance, repair, and rental equipment.
Simac Electronics, situated in Neukirchen-Vluyn, Germany, is a pan-European manufacturer and developer specializing in computer electronics and open-source hardware. The company offers a broad spectrum of products, including sensors, development boards, high-end PCs, industrial systems, and educational solutions. With a specialization on development, production, and service, it provides a comprehensive one-stop solution. Its product lineup also encompasses measuring devices, linker kit buzzers, cables, and voltage converters. Additionally, it markets special systems and electronic components under its "Joy-IT" brand.
EFS, established in 1980 and headquartered in Montagny, France, is a manufacturer that specializes in the design and manufacture of industrial equipment. The company offers a range of products, including isotonic hydration mix, canister/cartridge filters, Amazon elastic file system, and handling devices. It also provides production services for small and medium-sized series, component supply, assembly, testing, and project management. Its filter products are durable and a cost solution for GT inlet air filtration. The company was recognized by Expo 2020 Dubai with a certificate of achievement for continual improvement in worker welfare. It serves the trucking industry and freight industry.
Newtons4th Ltd (N4L) was established in 1997 as a manufacturer of power test instruments having its head office in Leicester, UK. The company produces Power Analyzers, Frequency Response Analyzers, Impedance Analyzers, and LCR Meters. Power analyzers are used to measure a device's power consumption or generation, whereas Frequency Response Analyzers test the components, circuits, and systems in the frequency domain. The Impedance analyzer and the LCR Meters have uses in Electrical and Mechanical Engineering and Material analysis, such as determining the input/output impedance of any circuit or system or fruit and vegetable ripeness analysis and similar applications.
SIGLENT Technologies America, Inc., is a Shenzhen, Guangdong, China-based designer and manufacturer of electronic test and measurement instruments established in 2002. The company offers digital & handheld oscilloscopes, RF & waveform generators, spectrum & vector network analyzers, digital multimeters, and DC electronic loads. These products are used for time domain analysis of RF systems, electromagnetic pre-compliance testing, and SMPS characterization techniques in the communication sector, government facilities, and electronic manufacturing. It has achieved the US UL certification and has additional establishments in Solon, Ohio, USA, and Europe.
Matsusada Precision Inc is located in Shiga, Japan, and was established in 1978, known as the developer, manufacturer, and global supplier of power supply products and imaging products. The power supply products include high voltage amplifiers, AC, DC, and regenerative DC power supplies as well as optical sensors, which have their use in research centers, aerospace, analytical instruments, electronics, and almost all industries that use power to operate. The imaging products are associated with businesses that use X-ray inspection as a service such as life sciences and electronics Environmental improvement equipment is also supplied, but only in Japan.
GW Instek or Good Will Instruments is a Taiwanese instrument maker founded in 1975. GW Instek has over 300 product lines, which include Oscilloscopes, Spectrum Analyzers, Signal Sources, Basic Tests and Measurement Instruments, Safety Monitoring Systems, and more. Leading manufacturers choose them as their test and measurement provider. GW Instek has become the leading brand in the electronic test and measurement industry. They help electronic industries reduce testing costs and increase competitiveness. GW Instek has subsidiaries in five countries and is sold to more than 80. Their mission is to reduce total costs and create customers value from cost savings.
EA Elektro-Automatik GMBH & Co, KG, established in 1974 and headquartered in North Rhine Westphalia, Germany, is a manufacturer of power electronics. The company offers a wide range of products, including conventional, bidirectional, and regenerative DC supplies and loads. It also offers auto-ranging power supplies, high-power mains adapters, and cabinet rack power systems. Its true autoranging allows the use of a single source to test a wide range of electronic devices and systems, maximizing flexibility. It has achieved ISO 9001:2015 and ISO 14001:2015 certification. It serves industries such as e-mobility, renewable energy, and manufacturing.
Scientific Mes-Technik Pvt. Ltd., founded in Indore, Madhya Pradesh, in 1963 is a manufacturer of Electronic Instruments such as Oscilloscopes, Spectrum Analyzers, and Network Analyzers. The company's product portfolio includes Function Generators, Digital Multimeters, Pulse Generators, Frequency Counters, and LCR Meters. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They also offer calibration services in accordance with IEC-ISO 17025:2005, Product Selection Guidance, Engineering Support, and Custom Manufacturing.
KIKUSUI ELECTRONICS CORP., founded in Yokohama, Kanagawa in 1951 is a manufacturer od electronic measuring instruments, electronic loads, and safety test equipment. The company's product portfolio includes Electrical Safety Testers, EMC Testers, Harmonics and Flicker Testers, Battery/Capacitor Testers, and AC Electronic Loads. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
TDK-Lambda serves the communications, medical, factory automation, semiconductor, transportation, LED display, and energy industries with a variety of power-related products. Among these products are onboard power supplies, PC board power supplies, noise filters, linear power supplies, unit and configurable power supplies, programmables power supplies, power modules, and bidirectional DC-DC converters.
ITECH Electronic Co.Ltd, established in 2000 at Taiwan, Japan is a manufacturer of regenerative power supply equipment and testing solutions for power systems. The company with unique research and analysis manufactures advanced power testing solutions that come with intelligent technology, eco-friendly concepts as well as creativity offering enhanced performance. Their products involve source measure unit, Ac/DC Power supply, electronic load, power meter and discharge test systems. These products find applications in automotive electronics, electric vehicle, semiconductor, battery recycling and medical electronics. These equipment are highly regenerative and help handle performance gaps, test electric flow and ensure uninterrupted power supply from sources.
TEKTRONIX, INC., founded in 1946, is a manufacturer of measurement solutions used in 3D sensing, EMI/ EMC testing, high-speed serial communication, material science engineering, and Wireless & RF testing. The products include oscilloscopes & probes, signal generators, margin testers, multimeters, and analyzers. The company's products are used in advanced research, aerospace & defense, automotive, power semiconductor, and medical industries. The Bracknell Berkshire company offers calibration, repair, asset management, package assembling, and testing services following NEMA, HAlT & HASS, environmental, and shock-vibration testing.
Mean Well web, established in 1996, based in Belgium and the Netherlands, is operated by Telerex BV (a member of Eight Lakes group) and is a manufacturer and supplier of power supplies, including electronics and electrochemical components for OEM and trade. The company serves industries and markets such as medical, transportation, automotive, military aerospace, and many more with power supplies, inverters, and converters to be used for electronics that require them. A wide array of AC/DC converter power supplies, LED drivers, and desktop adaptors are among the core product lines having significant applications in industries and markets utilizing them.
Artesyn Embedded Power, founded in Tempe, AZ, is a manufacturer of precision power conversion, measurement, and control solutions for mission-critical applications and processes. The company's product portfolio includes High Voltage Products, Low Voltage Power Supplies, Remote Plasma Sources, Temperature Measurement Products and SCR Power Controllers. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
CP Power & Automation, established in 1999 and headquartered in Seven Stars Industrial Estate, Coventry, England, is a supplier of DC power supplies and DC power products. The company’s product portfolio includes DC, programmable & variable power supplies, frequency converters, battery chargers, DC AC inverters, and UPS from various manufacturers including Sunny, Elektro Automatik, Reign Power, TDK Lambda, and Polyamp. These products are used for various applications including rail industry, electric vehicles, industrial rectifiers & chargers, gate automation, and industrial DC UPS.
YAMAMOTO-MS Co., Ltd., established in 1950 and based in Tokyo, Japan, is a designer, developer, and manufacturer of wet surface treatment apparatus and analytical equipment, along with wet surface treatment-related products. The company is a pioneer in creating experimental instruments for liquid samples in the biomedical engineering sector. The company’s clientele includes national institutes, plating solution suppliers, and electronics manufacturers. Yamamoto-MS Co., Ltd., with a paid-up capital of JPY 80,000,000, continues to be a name known in the field of wet surface treatment and related industries.
PeakTech Prüf- und Messtechnik GmbH, established in 1957 and based in Ahrensburg, Germany, is a manufacturer and supplier of electronic measurement technology. The company's product portfolio includes multimeters, voltage testers, thermal imaging cameras, isolating transformers, and sound level meters, as well as calibrators. These products are applied in various industries, including electrical engineering, environmental monitoring, aviation, telecommunications, and research and development. The company provides customer services, including technical support, repair, service requests, and product development.
Aim and Thurlby Thandar Instruments, founded in 1989 and based in Huntingdon, UK, is a manufacturer of electronic test and measurement equipment and laboratory supplies. Its products include EMC analyzers, waveform amplifiers, pulse generators, multimeters, and DC power supplies. It also provides accessories related to the products, including power adaptors, cases, rack mounts, cables, and connectors. The company complies with the WEEE directive, and all its products are listed in Annex I of the RoHS directive. It sells its products worldwide through various distributors, and all the products are designed and manufactured at the Huntingdon facility.
ttec, founded in 1995 and headquartered in Istanbul, Turkey, is a designer, manufacturer, and distributor of mobile accessories. The company’s product portfolio is segmented into smart living, music & voice, power, charge, and protection & style. It offers automatic Wi-Fi smart pet feeders, wireless chargers, wireless headsets, video & audio cables, and smart bulbs. The products are offered under various brands including Sensi, Boost Pro, TouchPen S, AirGlass, and SoundBuddy, and are sold on Amazon, eBay, Ozon, Carrefour, and eMag.
Langlois established in 1975 and headquartered in Gradignan Cedex, France, is a manufacturer and supplier of electrical laboratory equipment, and furniture. The company’s product portfolio is segmented into electrical accessories, measuring apparatus, educational solutions, electrotechnics, and wiring solutions. The measuring apparatus for example comprises oscilloscopes, clamp meters, probes, spectrum analyzers, and installation testers. It also offers customized products made to measure according to the customer’s specifications. The company offers products used in laboratories, educational institutions, production workshops, photovoltaic & wind energy, and the power industry.
PASCO Scientific, headquartered in the United States, is a supplier company of educational science solutions since 1964. The company's comprehensive product range includes science sensors, data loggers, and lab equipment, catering to different educational levels from K-12 to higher education. Hands-on science tools and datalogging solutions connect the students directly to science and STEM concepts with classroom technology such as sensors, interfaces, and data collection and analysis software. They also design and manufacture lab equipment for physics and engineering and offer curriculum solutions.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Pacific Power Source, Inc. |
4.8%
|
| 2 | Teledyne LeCroy |
4.6%
|
| 3 | Labsphere, Inc. |
4.0%
|
| 4 | AMETEK Programmable Power |
3.4%
|
| 5 | OWON Technology Inc. |
3.1%
|
| 6 | SIMAC Electronics GmbH |
3.1%
|
| 7 | YAMAMOTO-MS Co., LTD. |
3.1%
|
| 8 | Chroma Systems Solutions, Inc. |
2.8%
|
| 9 | LANGLOIS |
2.8%
|
| 10 | SAE Manufacturing Specialties Corp |
2.8%
|
Derivation Method
The ranking is calculated based on the click share within the programmable power supply page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
21 | 58.3% |
|
Japan
|
5 | 13.9% |
|
Germany
|
2 | 5.6% |
|
United Kingdom
|
2 | 5.6% |
|
Taiwan
|
2 | 5.6% |
|
India
|
2 | 5.6% |
|
France
|
1 | 2.8% |
|
China
|
1 | 2.8% |
162 products found - Page 1
162 products - Page 1
Luci
410+ people viewing
Last viewed: 4 hours ago
With the difficulty of procurement of competitors, we designed the same product, such as matching the position of the screw hole. Furthermore, sinc...
Yagyu Shokai Co., Ltd.
10+ people viewing
Last viewed: 43 minutes ago
Very Fast Response
■Features - Data acquired with the data recording function can be displayed on the screen as a table or graph. ・Low ripple and low noise. ■Specif...
Keisoku Giken Power Electronics
330+ people viewing
Last viewed: 26 minutes ago
Standard Response
Equipped with emergency stop/interlock function. Maximum capacity 300kW, 1,600V output New functions have been added to the ADG-P series, which ha...
10 models listed
Keisoku Giken Power Electronics
330+ people viewing
Last viewed: 11 hours ago
Standard Response
For large equipment with three-phase input. Maximum 90KVA output possible The large capacity programmable AC power supply (three-phase switching o...
4 models listed
Keisoku Giken Power Electronics
230+ people viewing
Last viewed: 10 hours ago
Standard Response
For aircraft ground power. Maximum 90KVA output possible The QA-T4-4 series (dedicated for three-phase output 400Hz) is a three-phase power supply...
4 models listed
Keisoku Giken Power Electronics
230+ people viewing
Last viewed: 1 minute ago
Standard Response
Automated Voltage/Frequency Converter (VVVF) This is a single-phase type AC power supply that can output an output capacity of 10kVA to 30kVA. Spa...
3 models listed
Keisoku Giken Power Electronics
230+ people viewing
Last viewed: 1 day ago
Standard Response
Compact housing. Multi-output integrated type The 400XAC series, a small/medium capacity programmable AC power supply (single-phase/three-phase mu...
2 models listed
Keisoku Giken Power Electronics
290+ people viewing
Last viewed: 2 minutes ago
Standard Response
1KVA at 2U height. Adopts ultra-noise circuit method We have a lineup of output capacities of single-phase linear type 500VA to 5kVA. It supports ...
5 models listed
Wave Crest
330+ people viewing
Last viewed: 12 hours ago
Standard Response
4.0 Company Review
■ Features ・ Rated output voltage: 40V, 50V, 80V, 160V ・ Rated output power: 180W, 360W, 720W, 1080W ・ Achieving high -efficiency power supply b...
5 models listed
Wave Crest
430+ people viewing
Last viewed: 2 hours ago
Standard Response
4.0 Company Review
■ Features ・ Rated output voltage: 40V, 50V, 80V, 160V ・ Rated output power: 180W, 360W, 720W, 1080W ・ Achieving high -efficiency power supply b...
6 models listed
Wave Crest
340+ people viewing
Last viewed: 5 hours ago
Standard Response
4.0 Company Review
■ Main features ・ Rated output voltage: 40V, 50V, 80V, 160V ・ Rated output power: 180W, 360W, 720W, 1080W ・ Achieving high -efficiency power sup...
5 models listed
Wave Crest
260+ people viewing
Last viewed: 41 minutes ago
Standard Response
4.0 Company Review
■ Overview ・ SPD1168X Programmable Liner DC power supply has a 2.8-inch TFT-LCD display, has a remote computer control function and a real-time wa...
2 models listed
Wave Crest
180+ people viewing
Last viewed: 6 minutes ago
Standard Response
4.0 Company Review
■ Overview ・ Lightweight and full of functions LED display screen programmable linear DC power supply. ・ Three independent output: 2.5V, 3.3V, an...
Wave Crest
10+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■Features ・Independent controllable channel + traction sense ・Output resolution: 1mV/1mA ・Low ripple/low noise ・Up to 100 group timers ・Multi-...
Wave Crest
260+ people viewing
Last viewed: 6 minutes ago
Standard Response
4.0 Company Review
■ Overview ・ SIGLENT's SPD3000X Series Programmable Liner DC power supply has a 4.3-inch TFT-LCD display, supports remote programming, and has a r...
2 models listed
Wave Crest
10+ people viewing
Last viewed: 1 second ago
Standard Response
4.0 Company Review
■Features ・ODP3032: 2 independent controllable channels ・Maximum output resolution: 1mV/1mA ・Low ripple/low noise: <300μVrms/2mVpp ・Up to 100 g...
Wave Crest
220+ people viewing
Last viewed: 11 minutes ago
Standard Response
4.0 Company Review
■ Overview The ODP series is a new high -performance programable linear DC power supply. In order to meet various test conditions, set possible ti...
2 models listed
Wave Crest
10+ people viewing
Last viewed: 25 minutes ago
Standard Response
4.0 Company Review
■Features ・3 independent controllable channels ・Maximum output resolution: 1mV/1mA ・Ripple/low noise ・Up to 100 group timers ・Multi-work modes...
Japan INSDAC Co., Ltd.
20+ people viewing
Standard Response
Features ・4.3 inch TFT color display, WVGA (480 * 272) ・Graphical user menu ・2 independent channels 0~30V/0~3,0~5A ・Fixed voltage output 2.5V, ...
Japan INSDAC Co., Ltd.
40+ people viewing
Standard Response
■Features ・2 adjustable outputs and 1 fixed output ・Output off function ・LED for display/setting ・Standard interface USB ・Constant voltage and...
Japan INSDAC Co., Ltd.
20+ people viewing
Standard Response
■Features ・Single output ・Output off function ・LED for display and settings ・Standard interface USB ・Constant voltage and constant current ・A...
Japan INSDAC Co., Ltd.
20+ people viewing
Last viewed: 1 day ago
Standard Response
■Features ・1 adjustable output and 2 fixed outputs ・Output off function ・LED for display and settings ・Standard interface USB ・Constant voltag...
Japan INSDAC Co., Ltd.
10+ people viewing
Standard Response
■Features ・750W power output ・Constant voltage and constant current ・Parallel use of multiple power supplies - Can be remotely programmed to a c...
TEXIO TECHNOLOGY CORPORATION
60+ people viewing
Last viewed: 7 minutes ago
Standard Response
■Low-noise, high-performance linear AC power supply The APS-7000E series is a linear AC power supply that supports a variety of AC waveforms, inclu...
Teledyne LeCroy
370+ people viewing
Last viewed: 21 hours ago
Standard Response
■ Characteristics ・ 13 types of assortment ・ Programmable type is also available ・ Selectable for independent movement, in -line operation, para...
4 models listed
TEXIO TECHNOLOGY CORPORATION
100+ people viewing
Last viewed: 10 minutes ago
Standard Response
■Low-noise, high-performance linear programmable AC power supply The APS-7000 series is a highly functional linear programmable AC power supply tha...
TEXIO TECHNOLOGY CORPORATION
60+ people viewing
Last viewed: 20 minutes ago
Standard Response
■Low-noise, high-performance linear programmable AC power supply The APS-7000 series is a highly functional linear programmable AC power supply tha...
TEXIO TECHNOLOGY CORPORATION
70+ people viewing
Last viewed: 4 minutes ago
Standard Response
■Low-noise, high-performance linear programmable AC power supply The APS-7000 series is a highly functional linear programmable AC power supply tha...
TEXIO TECHNOLOGY CORPORATION
90+ people viewing
Last viewed: 1 day ago
Standard Response
■Low-noise, high-performance linear programmable AC power supply The APS-7000 series is a highly functional linear programmable AC power supply tha...
Nippon Sokki Co., Ltd.
80+ people viewing
Last viewed: 1 day ago
5.0 Company Review
■Summary ・Linear amplifier method ・High stability, low ripple noise ・Output capacity: 300VA to 3kVA ・Output frequency: 45Hz to 500Hz ・Output m...
