1. Metoree
  2. Valves
  3. Check Valves
Description 214 Manufacturers 99 Products
Zwick Armaturen GmbH
ZETKAMA
Zenit
Yuken Europe Ltd
Xiamen Landee Industries Co., Ltd.
Wouter Witzel EuroValve B.V.
WITT Gas Controls LP
Western Enterprises
Wenzhou Solid Mechanical Equipment Co., Ltd
WEH GmbH Verbindungstechnik
WEH GmbH
Watts.

214 Check Valve Manufacturers in 2024

This section provides an overview for check valves as well as their applications and principles. Also, please take a look at the list of 214 check valve manufacturers and their company rankings. Here are the top-ranked check valve companies as of November, 2024: 1.CELEROS FLOW TECHNOLOGY, 2.Liberty Pumps., 3.Planar Systems.

Table of Contents

Supervisor of this article
Yoichi Hiroki
Yoichi Hiroki

1985-2014: Worked for Alstom Corporation, ABB Corporation, and Gadelius Corporation, designing Jungstrom air preheaters and mechanical design of diamond soot blowers. (ABB Corporation: https://new.abb.com/jp)
2014-2021: Worked as an engineering and project manager at Alvos Inc.
https://www.linkedin.com/in/yoichi-hiroki-92192394/

What Is a Check Valve?

A Check Valve is a valve that controls the flow of fluid in a pipe in one direction only and prevents flow in the opposite direction.

Synonyms include Non-Return Valve, One-way Valve, Reflux Valve, Pressure Retention Valve, and Back-Flow Prevention Valve.

Uses of Check Valve

A Check Valve is used when you do not want fluid to flow backward.

The basic uses of Check Valves are as follows:

  • Prevention of mixing of two fluids
  • Preventing backflow
  • Controlling flow direction
  • Preventing water hammer

When installed at a point where two fluids merge, the check valve prevents the mixing of the two fluids and controls the flow of only one of them.

When installed in a rising piping section on the discharge side of a pump, fluid flows while the pump is running, and after the pump is stopped, the Check Valve closes to prevent fluid in the piping at a higher level downstream of the pump from flowing back to the pump.

In steam piping, it is also used to prevent water hammer. Water hammer is a phenomenon in which the pressure in a piping temporarily rises and falls due to a sudden change in fluid velocity. The pressure fluctuations caused by water hammer can damage pumps and piping, and Check Valves are used as a preventive measure.

Principle of Check Valve

In a Check Valve, the valve disc is actuated to open and close by the pressure difference between the inlet side (primary side P1) and the outlet side (secondary side P2) of the fluid.

The pressure difference and valve operation are as follows:

Open: Inlet side (primary side P1) pressure is higher than outlet side (secondary side P2) P1 > P2
Closed: Inlet side (primary side P1) pressure is lower than outlet side (secondary side P2) P1 ＜ P2

When the pressure at the outlet side (secondary side P2) is higher, the disc is pressed against the seat surface by back pressure and adheres tightly to prevent fluid backflow. The disc automatically opens and closes according to this pressure difference, and the fluid flows or does not flow.

Types of Check Valves

There are five types of Check Valves. The features of each are as follows:

1. Swing Check Valve

Swing check valves have a straight fluid flow and are mounted directly on an arm or disc with the disc attached to a hinge mechanism. The disc rotates with the hinge as a fulcrum and opens or closes the valve according to the pressure difference of the fluid.

Figure 1. Swing check valve

Figure 1. Swing check valve

Features

  • Generally, when the disc is fully opened at the full port, the disc does not block the flow path and the pressure loss is small.
  • Full port means that the flow path of the valve body is the same diameter or larger than the inside diameter of the piping.
  • When the disc weight is heavy, the minimum pressure differential for valve opening and the cracking pressure will be large. For lighter discs, the minimum pressure difference to open the valve and the cracking pressure will be smaller.
  • Cracking pressure is the pressure difference for a given flow rate.
  • Since the disc rotates on a hinge shaft, the shaft and bearing side will wear out due to long-term use and frequent operation. This can result in poor opening and closing action of the disc and reduced sealing between the disc and the seat.
  • Since the disc rotates at a relatively large angle from fully closed to fully open, its response to sudden pressure changes is low. Heavy discs also have the problem of greater impact on the seat during abrupt valve closure.

Installation

When the piping is horizontal, or when the piping is vertical, it is used when the fluid flows from downward to upward. It cannot be used when the fluid flows from upward to downward.

2. Lift Check Valve

The lift check valve is a mechanism in which the fluid flow is S-shaped and the disc to which the shaft is attached rises and falls. The disc rises or descends depending on the pressure difference, and opens or closes the valve.

Figure 2. Lift check valve

Figure 2. Lift check valve

Features

  • The flow path is S-shaped and pressure loss is high.
  • Due to the heavy weight of the disc, the minimum pressure differential for valve opening and the cracking pressure are large.

Installation
Limited to grounding only when piping is horizontal. Cannot be used when piping is vertical and fluid flows vertically.

3. Wafer Check Valve

Wafer check valves are wafer-shaped valves that are installed by sandwiching the valve body between flanges and tightening bolts and nuts. The fluid flow is nearly linear and incorporates two semi-circular discs with a hinge mechanism.

The two discs rotate to open the valve due to the difference in fluid pressure using the hinge as a fulcrum, and rotate in the opposite direction to close the valve due to the coil spring attached to the discs.

Figure 3. Wafer check valve

Figure 3. Wafer check valve

Features

  • The flow path is almost straight and the pressure loss is small.
  • Wafer-shaped body is thin and lightweight.
  • Can be directly attached to pumps and other equipment.
  • The disc is forced to rotate by a spring and immediately closes, thus reducing water hammer phenomenon.
  • It has high sealing performance with high hermeticity.
  • It may be somewhat less responsive and less durable to cavitation and unbalanced fluid flow.
  • Some have a built-in bypass channel, eliminating the need to drain residual fluid or install bypass piping for priming.

Installation
Piping can be used in a variety of orientations, including horizontal, vertical, and inclined. When the piping is vertical, the fluid can be used in either vertical or horizontal flow direction.

4. Ball Check Valve

The ball check valve is a mechanism in which the fluid flow is S-shaped and the ball of the valve plug rises and falls. The ball rises and falls depending on the pressure difference to open or close the valve.

Figure 4. Ball check valve

Figure 4. Ball check valve

Features

  • The flow path is S-shaped or straight, and pressure loss is not so large.
  • Since the disc motion is unrestrained, some foreign matter in the fluid is tolerated.
  • Not effective in preventing water hammer.

Installation
Piping is available for horizontal and vertical applications. The vertical version opens and closes under the ball's own weight, so it cannot be used when fluid flows from below to above. 

5. Spring Disk Check Valve

The spring disc check valve is a mechanism in which the fluid flow goes around the disc in an S-shape and the disc to which the shaft is attached rises and falls. The disc rises due to the pressure difference and descends by spring force to open or close the valve.

Figure 5. Spring disk check valve

Figure 5. Spring disk check valve

Features

  • The flow path is S-shaped and flows around the disc, resulting in a large pressure drop.
  • The disc is lightweight, and the minimum pressure differential for valve opening and the cracking pressure are small.
  • The operating distance between fully open and fully closed is small, resulting in excellent responsiveness.

Installation
Piping can be used in either horizontal or vertical direction. When the piping is vertical, the fluid can be used in either vertical or horizontal flow direction.

List of 214 Check Valve Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Austria
  • Belgium
  • Canada
  • China
  • Czech Republic
  • Denmark
  • France
  • Germany
  • India
  • Italy
  • Japan
  • Lithuania
  • Netherlands
  • Poland
  • Portugal
  • Spain
  • Sweden
  • Switzerland
  • Taiwan
  • Turkey
  • United Kingdom
    • Liberty Pumps.
      • United States of America Address: 7000 Apple Tree Avenue,Bergen, New York, United States of America

      Manufacturer Overview

      Liberty Pumps is a manufacturer of wastewater and ground pumping products that was established in Bergen, New York, USA, in 1965. The company specializes in systems used in the residential and commercial sectors. These systems include backup sump pumps for emergency or blackout scenarios, grinder pumps for drainage of basement or crawl spaces, and condensate pumps for HVAC and laundromat applications. The company is ISO 9001:2015-certified, and mainly serves electrical, plumbing, and construction contractors.

    • WITT Gas Controls LP
      • United States of America Address: 1055 Windward Ridge Parkway Suite 170 Alpharetta, Georgia, United States of America

      Manufacturer Overview

      WITT Gas Controls LP, a company established in 1945, is based in Witten, Germany, as a manufacturer of gas safety and control equipment. Its specialization is manufacturing gas mixers, mobile analyzers, gas receivers, gas analyzers, and ambient air monitoring. It also manufactures package leak detectors, barcode readers, pressure regulators, pressure regulating stations, and gas filters. The company obtained several ISO certifications, including ISO 9001 and ISO 22000. Its manufactured products are utilized in metalworking, glass processing, biogas, welding, and medical industries across China, Indonesia, Australia, Germany, and Turkey.

    • NIBCO INC.
      • United States of America Address: 1516 Middlebury Street Elkhart, Indiana, United States of America

      Manufacturer Overview

      NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.

    • CELEROS FLOW TECHNOLOGY
      • United States of America Address: 4045 BALLANTYNE CORPORATE PLACE, SUITE 300, CHARLOTTE, North Carolina, United States of America

      Manufacturer Overview

      Celeros Flow Technology is based in North Carolina, USA, and is a manufacturer of flow control technology products that was established in 2020 as a spin-off company from the SPX Flow Group. The company markets its products under several brands, including M&J Valve, GD Engineering, and ClydeUnion Pumps. Its product lineup includes filtration systems such as coalescers, valves such as butterfly valve models, and pumps such as reciprocating pump models. The company’s products are used by clients in the oil and gas, power generation, and chemical processing industries.

    • Planar Systems
      • United States of America Address: 1195 NW Compton Dr., Hillsboro, Oregon, United States of America

      Manufacturer Overview

      Planar Systems, established in 1983 and headquartered in Beaverton, Oregon, USA, is a manufacturer and supplier of display and digital signage solutions. Operating as a subsidiary of Leyard Optoelectronic Co., Ltd., their product lineup includes LCD video walls, LED video tiles, touch screens, interactive displays, projection systems, and desktop monitors. These various offerings find applications in enhancing visual communication, collaboration, and entertainment across sectors such as retail, hospitality, education, government, and media. The company upholds ISO 9001:2015 certification for its quality management systems.

    • American Cast Iron Pipe Company
      • United States of America Address: 1500 32nd Ave North, Birmingham, Alabama, United States of America

      Manufacturer Overview

      American Cast Iron Pipe Company, headquartered in Birmingham Alabama is a manufacturer of valves, fire hydrants, and pipes established in 1905. The pipes include spiral-welded steel and ductile iron pipes utilized in the waterworks sector. The firm produces high-frequency welded steel pipes for the energy and carbon capture sectors. Fire pumps, structural casing, piling, castings, and specialty rubber goods are manufactured. The goods are employed in pipeline dredging, structural facilities, mining, and mining, the goods go through finished pipe inspection, pipe stenciling, hydrostatic, ultrasonic, and lab testing before sell.

    • Ideal Valve, Inc.
      • United States of America Address: 1475 Lavergne Ave. Grafton, North Dakota, United States of America

      Manufacturer Overview

      Ideal Valve Inc. is a designer and manufacturer of custom high-precision metering valves for various industries including aerospace & aviation and manufacturers of precision measurement instruments based in Grafton, North Dakota. The company offers various products including Stainless Steel Needle Valves designed for extremely precise flow control of gases and liquids with working pressure up to 5000 psi and Brass Needle Valves designed for pressures up to 3000 psi and for applications requiring metering of larger flows than those controlled by standard brass and stainless steel valves.

    • Harwood Engineering Co., Inc.
      • United States of America Address: 8246 Sandy Court, Suite E Jessup, Maryland, United States of America

      Manufacturer Overview

      Harwood Engineering Co., Inc. is a developer and manufacturer of pressure systems and related components established in 1947 and headquartered in Walpole, Massachusetts, USA. The company offers pressure transducers and vessels for measurement or containment applications, hydraulic intensifiers for generating pressure in process gasses or liquids. It also offers pressure calibration equipment for ensuring accurate pressure measurement and operation of its portfolio products. The company’s products are mainly used by clients in the chemical, petroleum, and energy industries.

    • KOA Speer Electronics Inc
      • United States of America Address: 199 Bolivar Drive Bradford, Pennsylvania, United States of America

      Manufacturer Overview

      KOA Speer Electronics Inc. (KSE), founded in 1980 and currently a subsidiary of KOA Corporation, is a passive component manufacturer based in Bradford, Pennsylvania, United States. The company's portfolio includes thick film resistors, ranging from precision and surge current to wide terminal options. It also produces low-resistance current sense or shunt resistors and leaded resistors. Inductors, thermal sensors, and fuses are also part of the company’s product lineup. Certified with ISO 9001:2015 and IATF 16949:2016, the company serves various industries, such as automotive electronics, energy, and medical equipment. It also provides customized electronic data interchange (EDI) for customers’ data access.

    • Bezares USA
      • United States of America Address: 27634 Commerce Oaks Drive, Oak Ridge North, Texas, United States of America

      Manufacturer Overview

      Bezares USA, founded in 2000 and headquartered in Oak Ridge, Texas, USA, is a manufacturer of hydraulic components for commercial vehicles. The company specializes in manufacturing a diverse range of hydraulic components and systems, including power take-off (PTO) units, hydraulic pumps, and hydraulic valves. These components are used for the robustness and stability, ensuring consistent and efficient power transmission in various hydraulic applications. The products find extensive use in industries such as construction, agriculture, and commercial vehicles, where dependable hydraulic systems are essential for powering equipment and machinery.

    • Danfoss Industrial Automation
      • United States of America Address: 11655 Crossroads Circle, Baltimore, Maryland, United States of America

      Manufacturer Overview

      Danfoss was founded in 1933 in Nordborg, Denmark where it remains today. The company serves automotive, food & beverage, energy & natural resources, wastewater, and mobile hydraulics industries as a manufacturer of power systems and industrial hydraulics. The company operates through three business segments: Danfoss Power Solutions, Danfoss Climate Solutions, and Danfoss Drives. Danfoss Power Solutions produces electronic controls, hydraulic power units, and cylinders. Climate Solutions produces heat exchangers, burner components, hydraulic heating, and sight glasses. Drives produce gear motors, low and medium voltage drives, and various software solutions for operating drives.

    • International Polymer Solutions, (iPolymer)
      • United States of America Address: 5 Studebaker, Irvine, California, United States of America

      Manufacturer Overview

      International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.

    • Ultra Clean Holdings, Inc.
      • United States of America Address: 26462 Corporate Avenue, Hayward, California, United States of America

      Manufacturer Overview

      Ultra Clean Holdings Inc., founded in 1991 with headquarters in the San Francisco Bay Area, USA, is a manufacturer of chemical and gas delivery components and systems.   The company's product line includes valves, fittings, weldments, and heaters. Its systems include modular plastic chemical delivery system modules and subsystems, as well as complete turnkey PFA-grade gas delivery systems used in the manufacture of semiconductors. The company serves many industries, including semiconductor production, semiconductor equipment manufacturing, energy, pharma, and display manufacturing.

    • The Oilgear Company
      • United States of America Address: 1424 International Drive, Traverse City, Michigan, United States of America

      Manufacturer Overview

      The Oilgear Company, established in 1921 and located in Milwaukee, Wisconsin, USA, is a manufacturer of pumps, valves and related accessories for the industrial sector. The company offers fluid power pumps and valves for hydraulic control applications, such as hydraulic press operation, excavator arm movement, and directional fluid control. It also offers cartridge valves for subsea pressure control applications, and controllers for electrical embedded systems. The company chiefly serves clients in the marine, oil and gas, and chemical industries.

    • Air Logic Division of Knapp Mfg., Inc.
      • United States of America Address: 5102 Douglas Ave, Racine, Wisconsin, United States of America

      Manufacturer Overview

      Air Logic’s parent company was started in 1935. In 1975, the parent company purchased Johnson Controls’ Fluidic Division and renamed it Air Logic, operating out of Milwaukee, Wisconsin. The company is an ISO 9001:2015 certified manufacturer of standard and custom molded components and fittings to customers in the United States and overseas. The company’s primary product categories include orifices, filters, check valves, switches, and regulators. The company also offers custom manufacturing through options of orifice and fitting sizing, as well as custom molding and material varieties.

    • DFT Inc.
      • United States of America Address: 140 Sheree Blvd. PO Box 566, Exton, Pennsylvania, United States of America

      Manufacturer Overview

      DFT Inc., formerly known as Durabla Fluid Technology, is a manufacturer and provider of in-line check valves and severe service control valves founded in 1948. The company started by developing the Basic-Check valve for a customer needing a small metal-seated check valve with tight shut-off capabilities. With a rich history spanning over 70 years, DFT is Thomas Verified and a World Trade Center Member Company. They are ISO 9001:2015, 3-A, MSS, API 6D, CE, and PED Module H certified. It caters to the specific requirements of industries, including building maintenance, chemical processing, power generation, and more.

    • Hayward Flow Control
      • United States of America Address: 1 Hayward Industrial Dr Clemmons, North Carolina, United States of America

      Manufacturer Overview

      Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.

    • Carr Lane Roemheld Mfg. Co.
      • United States of America Address: 927 Horan Dr, Fenton, Missouri, United States of America

      Manufacturer Overview

      Carr Lane Roemheld Mfg. Co., established in 1952 and headquartered in Missouri, United States, is a manufacturer and supplier specializing in workholding and tooling solutions. The company offers a diverse range of products and services, including toggle clamps, hydraulic workholding, and quick die change systems. Catering to various industries, including manufacturing, automotive, aerospace, and precision engineering, its products find application in securing workpieces, molds, and tools, ensuring stable and precise machining and assembly operations.

    • ARGO-HYTOS
      • United States of America Address: Research Drive 43402 Bowling Green, Ohio, United States of America

      Manufacturer Overview

      ARGO-HYTOS, founded in 1947 and headquartered in Baar, Switzerland, is a global manufacturer and supplier of hydraulic system solutions. The company specializes in developing and producing components and systems for the hydraulic industry, having a product portfolio which encompasses off-line filters, off-line filter units, oil servicing systems, dewatering systems, and sensors and measurement devices. These offerings find applications in fluid power, motion control, and filtration technology for both mobile and industrial hydraulics. The company adheres to industry standards and holds certifications such as ISO 9001:2015 for Quality Management and ISO 14001 for Environmental Management.

    • MicroStrain, a LORD Company
      • United States of America Address: 459 Hurricane Lane, Williston, Vermont, United States of America

      Manufacturer Overview

      MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.

    • Jaeco Fluid Systems, Inc.
      • United States of America Address: 100 Quaker Lane Malvern, Pennsylvania, United States of America

      Manufacturer Overview

      Jaeco Fluid Systems Inc., founded in 1948 with headquarters in the USA, is a manufacturer of metering pumps and check valves. The company's product line includes diaphragm metering pumps, plunger metering pumps, hi-flo pumps, pump maintenance parts, and a range of stainless steel check valves. These products are built-to-order and are used in various applications such as irrigation, chemical processing, and car wash. The company serves various markets including automotive, agriculture, food processing, petrochemical processing, among others.

    • Cla-Val Company
      • United States of America Address: 1701 Placentia Avenue Costa Mesa, California, United States of America

      Manufacturer Overview

      Roll Seal Valve Co., Inc., established in 1936, is headquartered in Costa Mesa, California, USA, and is a manufacturer specializing in the production of valves and control systems. The company's product range includes butterfly valves, pressure-reducing valves, and other fluid control solutions engineered for reliability in waterworks, oil and gas, and chemical processing industries. It has received awards like the Fluid Control Pioneer Award in 2015 and Industry Innovation Recognition in 2019. Additionally, the company holds ISO 9001 certification for quality management.

    • Anver Corp.
      • United States of America Address: 36 Parmenter Road, Hudson, Massachusetts, United States of America

      Manufacturer Overview

      ANVER Vacuum Material Handling Specialists, established in 1975 and located in Elk Grove Village, Illinois, USA, is a manufacturer and supplier of vacuum tube lifting systems and vacuum lifting equipment. The company's product range includes vacuum tube lifters, lifting pads, grippers, generators, and system components, catering to diverse industries such as manufacturing, aerospace, automotive, food and beverage, and material handling. The company’s services entail, testing and certification, supply chain management, and technical support. The company also holds ISO 9001:2015 certification, an indication that it exceeds expectations in quality and service.

    • DeZURIK
      • United States of America Address: 250 Riverside Avenue North, Sartell, Minnesota, United States of America

      Manufacturer Overview

      DeZurik was founded in 1928 in Minnesota, USA and it is a manufacturer of process industry valves. The company manufactures valves for water treatment, water distribution, pulp and paper, oil and gas downstream, petrochemical products, mining, power, and hydropower dams. Its products include plug valves, butterfly valves, control valves, knife gate valves, actuators, hydraulic power units, and many more. The company's technical resources include software programs and application solutions. The company is ISO 9001-2015 certified.

    • Valve Check, Inc.
      • United States of America Address: 1081 Hwy 36 E, Maplewood, Minnesota, United States of America

      Manufacturer Overview

      Valve Check Inc., established in 2004 and based in Minnesota, US, is a manufacturer and designer of check and pressure relief valves. The company’s products include plastic cartridge valves, microneedle valves, custom manifolds, plastic check valves, and ball valves among others. The check valves come in a wide range of sizes, cracking pressures, and seal options. It serves a wide range of industries such as aerospace, medical, dental, chemical processing, fire protection, and many more.

    • Swagelok
      • United States of America Address: 29500 Solon Road, Solon, Ohio, United States of America

      Manufacturer Overview

      Swagelok Company was founded in 1947 in Cleveland, Ohio as a tube fitting manufacturer. The company serves numerous industries including the chemical, clean energy, food & beverage, industrial machinery, life sciences, and wastewater treatment industries. The copmany's product categories include hoses and flexible tubing, sample cylinders, welding systems, tubing and accessories, and measurement devices. The company's also offers engineering services including field engineering, onsite services, design and assembly services, training, and construction services.

    • Anderson Brass Company
      • United States of America Address: 1629 W. Bobo Newsom Hwy, Hartsville, South Carolina, United States of America

      Manufacturer Overview

      Anderson Brass Company, founded in 1982 and headquartered in Hartsville, South Carolina, USA, is a manufacturer of brass valves and fitting components. The company specializes in producing a diverse array of products, including brass fittings, instrumental ball valves, rising stem valves, and specialty plumbing components. These products come with durability, precision, and quality, offering leak-free connections and optimal performance, resulting in improved plumbing systems. These offerings find applications across a comprehensive range of industries, including plumbing, heating, ventilation, air conditioning, and industrial applications, to enable efficient and advanced fluid control systems.

    • Kennedy Valve
      • United States of America Address: 1021 E. Water Street, Elmira, New York, United States of America

      Manufacturer Overview

      Kennedy Valve is an ISO certified American waterworks manufacturer founded in 1877 and located in Elmira, New York. They have produced hydrants for firefighting and fire prevention in association with the American Water Works Association since 1913 along with plethora double disc gate valves, rotating disc gate valves, solid wedge gate valves, and check valves among others utilized in water and wastewater industries. The company is among the 17 McWane family of companies operating throughout the United States and Canada.

    • Varna Products, LLC.
      • United States of America Address: 4305 Business Dr, Cameron Park, California, United States of America

      Manufacturer Overview

      VARNA Products was founded in 2005 and is headquartered in Cameron Park, California. The company is a designer and manufacturer of fluid management systems that use Six Sigma methodologies of management, design, manufacturing, and packaging to maintain continuous improvement in the quality of deliverables. The company’s products include pumps, pre-lube oil pumps, circulating products, and controls. The company’s lubrication products are used in engines, sliding elements, gear trains, and other types of machinery used in the manufacturing and transportation industries.

      • United States of America Address: 265 Harmon Avenue, Lebanon, Ohio, United States of America

      Manufacturer Overview

      Diffused Gas Technologies, Inc. based in the United States, established in 1940 and a manufacturer and supplier of gas diffusion solutions for various industries. The company’s main products include advanced gas diffusion systems, gas distribution modules, and precision gas flow control devices. With an emphasis on pioneering technology and efficiency, Diffused Gas Technologies serves as an important partner for businesses seeking state-of-the-art gas diffusion solutions for applications such as semiconductor manufacturing, chemical processing, and research laboratories. Their products play a crucial role in ensuring specific and controlled gas delivery for a range of industrial processes.

    • Arcadian Services
      • United States of America Address: 3109 Northington Court Florence, Alabama, United States of America

      Manufacturer Overview

      Arcadian Services, founded in 1988, is a manufacturer of chemicals and equipment used in car and truck wash industries and purposes such as power washing, industrial cleaners, and cleaners. The chemicals include waxes & protectants, wheel & tire cleaners and treatment, presoaks, hand sanitisers and private labelling. The company in Florence, Alabama, offers car wash equipment such as touchless in-bay automatic, soft cloth in-bay automatic, tunnel system and self-service system. The equipment services such as maintenance, installation and remodelling are offered.

      • United States of America Address: 34 Sullivan Road, Unit #15 North Billerica, Massachusetts, United States of America

      Manufacturer Overview

      Aram Machine Co., founded in 1980 and headquartered in Billerica, Massachusetts, is a precision CNC machined parts manufacturer. Specializing in short and production runs, they offer stainless steel parts for diverse industries, such as beverage, pharmaceutical, medical, bio-tech, and food processing. Their product line includes valve bodies, pump bodies, fittings, tubing, connectors, and other custom parts. These precision components find application in fluid flow, food processing, medical devices, and industrial equipment."

    • Check All Valve Manufacturing Co.
      • United States of America Address: 1800 Fuller Road West Des Moines, Iowa, United States of America

      Manufacturer Overview

      Check All Valve Manufacturing Co. (CAVM) is a manufacturer and supplier of check valves founded in 1958 and based in Des Moines, Iowa. The company produces check valves with various connector types including flange, welded, and threaded units for use in oil and gas, food and beverages, water treatment, and chemical processing. Among the company's extensive product lineup are inline check valves designed to reduce pressure loss, spring check valves that can function optimally in all orientations, and poppet check valves engineered for intensive applications. CAVM also provides services for clients like technical support, custom design, and prototyping.

    • Kitz Corp. of America
      • United States of America Address: 10750 Corporate Dr., Stafford, Texas, United States of America

      Manufacturer Overview

      Established in 1951, KITZ Corporation of America is a manufacturer that specializes in producing and supplying industrial valves and controls for various industries such as oil and gas, chemical, power generation, and water treatment based in Stafford, Texas. KITZ provides various types of valves such as ball, gate, globe, check, and butterfly valves along with control valves and actuators. Their products are designed to control the flow of liquids and gases. With branch offices and subsidiaries in the United States, Germany, Brazil, Japan, and many locations throughout Asia, Kitz is able to serve customers globally.

    • Western Enterprises
      • United States of America Address: 875 Bassett Road Westlake, Ohio, United States of America

      Manufacturer Overview

      Western Enterprises provides products for control, storage, and transmisson of gases to industrial and medical markets. They are located in the United States of America in the state of Ohio in the city of Westlake. The company was founded in the year 1952 and strives to provide high quality produccts such as medical regulators, flowmeters, and pipe fittings. Many of their products are useful for appliances such as air conditioners and heaters.

    • Hydrasearch Company LLC
      • United States of America Address: 203A Log Canoe Circle, Stevensville, Maryland, United States of America

      Manufacturer Overview

      Hydrasearch Company LLC is a designer and manufacturer of fluid control and transfer products for the maritime industry that was established in Stevensville, Maryland, in 1962. The company’s product lineup includes fluid control components for defense applications such as quick disconnect couplings, underwater hull penetrators, and submarine hose assemblies. It also offers recreational marine hardware such as raw water strainers, sounding tube deck fittings, and vent check valves. The company chiefly serves the defense and recreational boating industries, with additional clients in the American commercial sector.

    • Bonney Forge Corporation
      • United States of America Address: 14496 Croghan Pike, Mount Union, Pennsylvania, United States of America

      Manufacturer Overview

      Bonny Forge was originally founded in 1876 and is based in Mount Union, Pennsylvania. The company isis a manufacturer of fittings, valves, and other products used in petrochemical, refining, power, energy, and industrial piping markets. The company’s five product lines are Forged Steel Fittings and Unions, Forged Steel Branch Connections, Forged Steel Valves, Cast Steel Valves, and Forged Ball Valves. The company uses CAD to allow customers to customize desired specifications of machines, such as valve size, Cv coefficient, and material.

    • Valtorc International
      • United States of America Address: 3105 Carter Circle Kennesaw, Georgia, United States of America

      Manufacturer Overview

      Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.

    • Beswick Engineering Co., Inc.
      • United States of America Address: 284 Ocean Road, Greenland, New Hampshire, United States of America

      Manufacturer Overview

      Beswick Engineering was founded in 1964 as an engineering consulting firm. Beswick now operates out of Greenland, New Hampshire. Berwick serves the medical devices, aerospace, analytical instruments, bomb, gas, & narcotic detection equipment, semiconductor, dental, hydrogen fuel cell, industrial robot & automation, inkjet, 3D printing, and packaging & food packaging machinery industries. 
Beswick offers tubing, tubing clamps, cylinders, compression fitting accessories, filters, mufflers, breathers, orifice restrictors such as drilled orifice fittings and sapphire orifice fittings, valves, regulators, and quick disconnects. Beswick also offers custom design options.

    • Aero Space Controls Corp.
      • United States of America Address: 1050 North Mosley, Wichita, Kansas, United States of America

      Manufacturer Overview

      Aero Space Controls Corporation was founded in 1965 and is based in Wichita, Kansas. Aero Space Controls is a producer of components often used in the aerospace and military sectors. Aero Space Controls has an extensive product catalog including categories such as actuators, valves, sensors, motors, and air conditioning-related components. Aero Space Controls also provides services including in-field and in-house repair and upper-level assembly. Upper-level assembly, combined with the upper-level design and development of actuators, pneumatic valves, air conditioning, and other components, provides turn-key read options for installation in aircraft.

    • Clippard
      • United States of America Address: 7390 Colerain Avenue Cincinnati, Ohio, United States of America

      Manufacturer Overview

      Clippard Instrument Laboratory, Inc. was founded in 1941 in Arkansas and is now located in Cincinnati, Ohio. The company is a manufacturer of miniature pneumatic valves, specializing in ultra low leak, precision pressure control, and high-resolution flow control. Categories of Clipard Products include electronic valves, proportional valves, isolation valves, electronic controls, custom solutions, ppressure regulators, control valves, directional control valves, air pilot valves, air preparation equipment, and fittings hose, and tubings.

    • Schutte & Koerting
      • United States of America Address: 2510 Metropolitan Drive Trevose, Pennsylvania, United States of America

      Manufacturer Overview

      Schutte & Koerting (S&K) is an American manufacturer of power and process equipment established in Trevose, Pennsylvania in 1876. The company primarily produces components for pumping, mixing or handling liquids and solids, such as syphons, eductors, and jet ejectors. They also offer devices for handling liquids and gasses, including thermocompressors, condensers, and desuperheaters. S&K products are used in various industrial processes, including in metal and petroleum refining, power generation, and wastewater treatment.

    • PCX Aerosystems - Santa Ana, DBA Integral Aerospace

      • PCX Aerosystems - Santa Ana, DBA Integral Aerospace
        Check Valves

      • United States of America Address: 2040 E. Dyer Road, Santa Ana, California, United States of America

      Manufacturer Overview

      PCX Aerosystems-Santa Ana, DBA Integral Aerospace is an aerospace company based in Santa Ana, California. Established in 1947, the company specializes in the design, manufacture, and assembly of complex aerospace components and assemblies, including fuel systems, engine components, and aircraft interiors. The company has a history of providing quality products and services to its customers, and has been renown for its excellence with numerous awards, including the Boeing Performance Excellence Award, the Airbus Supplier Award, and the Raytheon EPIC Supplier Award. With a strong aim on customer satisfaction, Integral Aerospace continues to be a supplier of aerospace components.

    • Tate Andale, Inc.
      • United States of America Address: 1941 Lansdowne Rd, Baltimore, Maryland, United States of America

      Manufacturer Overview

      Tate Andale, established in 1924, headquartered in Baltimore, Maryland, is a manufacturer and supplier of fluid handling solutions for industries. Their product range includes strainers, filters, and valves designed for applications in the marine, oil and gas, and other industrial sectors. Tate Andale's products ensure efficient fluid control, filtration, and protection, enhancing equipment performance and longevity. They hold certifications such as ISO 9001, and has a dependable fluid handling solutions tailored to speicifc industry requirements.

    • Dynalab Corp.
      • United States of America Address: 175 Humboldt Street, Suite 300 Rochester, New York, United States of America

      Manufacturer Overview

      Dynalab Corp was founded in Rochester, New York in 1957. Together with its wholesale division, Dynalon Labware, Dynalab produces and distributes standard and custom-made scientific equipment and laboratory supplies across North America. Science equipment and sampling apparatus offerings include hygrometers, mailing point devices, rollers, water stills, powders, seals, various samplers, and drills. Some of Dynalab’s laboratory supplies include Azlon plastics, burn-up boxes, desiccators, hydrometers, pipettes, shields, stopcocks, tote boxes, tubing, and watch glasses.

    • Century Rubber Co.
      • United States of America Address: 719 Rooster Drive, Bakersfield, California, United States of America

      Manufacturer Overview

      Century Rubber was founded in 1973 and is headquartered in Bakersfield, California. The company is a manufacturer of precision custom elastomer components such as rubber seals & die cut gaskets for aerospace, defense, electronics, medical, and other industries. The company’s fabrication methods include homogeneous molding, die cutting, rubber-to-metal and rubber-to-plastic vulcanizing. The company is ISO 9001 and AS9100D certified and works with such materials as silicone, ferrosilicon, Neoprene, Nitrile, and millable urethanes.

    • Amfas International Inc
      • United States of America Address: 1661 International Drive Suite 400 Memphis, Tennessee, United States of America

      Manufacturer Overview

      Amfas International Inc, founded in 2002 and based in Memphis, Tennessee, is a manufacturer and supplier of custom metal and plastic components. The metal part capabilities include CNC machinings, stamping, aluminum extrusion, and metal injections. The organization provides logistics services ranging from transportation to correct customs and duty documentation and quick prototyping. The plastic parts are rotational & blow molding, thermoforming, and 3D printing. The ISO 9001-certified company caters to the aviation, oil & gas, industrial, electronics, and medical sectors.

    • Colonial Engineering, Inc.
      • United States of America Address: 6400 Corporate Ave., Portage, Michigan, United States of America

      Manufacturer Overview

      Colonial Engineering, Inc. was founded in 1972 and is headquartered in Portage, Michigan. The company is a manufacturer of CNC, injection-molding, and other assembly and sub-assembly components for such industries as water treatment, automotive, HVAC, and industrial OEM. The company’s custom injection molding processes include molding, assembly, and fabrication using numerous materials such as PVC, Acetel, Nylon, Santoprene, and related thermoplastic polymers. The companys standard product lines include plastic valves, valve actuation devices, thermoplastic gear driven valves, unions, and butterfly valves.

    • Plast-O-Matic Valves, Inc.
      • United States of America Address: 1384 Pompton Avenue Cedar Grove, New Jersey, United States of America

      Manufacturer Overview

      Plast-O-Matic was formed in 1967 in New Jersey, now situated in Cedar Grove, New Jersey. Plast-O-Matic serves aquarium, chemical dosing, chemical processing, metal finishing, semiconductor, wastewater treatment, water purification, and government application industries. Product offerings include product data sheets, CAD downloads, installation & maintenance instructions, ball valves, check valves, gauge guards, pressure regulators, process cooling sticks, anti-siphon valves, shut-off and diverter valves, sight glass & level indicators, solenoid valves, venting valves, other process controls & pumps, and custom valves.

    • Brand Hydraulics Co.
      • United States of America Address: 2332 S. 25th Street,Omaha, Nebraska, United States of America

      Company Overview

      Brand Hydraulics, founded in 1956 and headquartered in Omaha, Nebraska, is a manufacturer and distributor of hydraulic components. Its product line includes hydraulic valves for controlling fluid flow and pressure, hydraulic pumps to move hydraulic fluid, and hydraulic motors to convert hydraulic energy into mechanical energy. The company also offers electronic controllers to manage hydraulic system operations and hand pumps for manual fluid movement. The company upholds rigorous quality standards with ISO 9001 certification.

    • DISTRIBUIDORA INTERNACIONAL CARMEN, S.A.U.

      • DISTRIBUIDORA INTERNACIONAL CARMEN, S.A.U.
        Check-Valves

      • United States of America Address: 2875 NE 191st ST. STE 302 Aventura, Florida, United States of America

      Company Overview

      Distribuidora Internacional Carmen, S.A.U., based in Zaragoza, Spain, has been a manufacturer and distributor of stainless steel fittings, hydraulic, and pneumatic components since its establishment in 1983. The company primarily produces various stainless steel fittings such as couplings, flanges, and adapters. It also offers hydraulic components such as hoses and swage ferrules, along with custom manufacturing services for client projects. The company’s products are commonly used in construction, agriculture, and mining operations.

    • Singer Valve Inc.
      • United States of America Address: 2048 Industrial Blvd, Kimball, Tennessee, United States of America

      Company Overview

      Singer Valve Inc., founded in 1957, is a manufacturer and distributor of control valves and related solutions in Tennessee, USA. The company manufactures products that help regulate and control water flow and other fluids in various applications. The company provides multiple solutions, including control valves, pressure-reducing valves, surge control valves, and altitude valves. These valves control fluid flow, pressure, and level in pipelines and water distribution systems. The company serves diverse industries, including municipal water utilities, wastewater management, industrial processes, and irrigation.

    • Precision High Pressure
      • United States of America Address: 155 Shannon Drive, Nampa, Idaho, United States of America

      Company Overview

      Precision High Pressure, established in 2015 and based in Nampa, Idaho, USA, is a manufacturer and supplier of accessory capables. The company's product range includes adapters and couplings, adjustable relief valves, air-operated needle valves, ball valves, and block and bleed valves. These products find applications in areas such as subsea and surface operations, hydrogen fuel cells, chemical injection systems, and process control systems. Serving industries like oil and gas, waterjet markets, hydrogen, and waterjet cutting, the company offers services such as high pressure valve solutions, custom fitting provisions, and tubing techniques.

      • United States of America Address: 303 RIVERCHASE WAY, LEXINGTON, South Carolina, United States of America

      Company Overview

      RainMaker Pump Stations was founded in 2001 and is based in Lexington, South Carolina. The company is a manufacturer of custom-engineered products for commercial, governmental, and residential customers. The company has five product lines: Industrial/Municipal, Agricultural Irrigation, Landscape Irrigation, Pump Controls, and Accessories. Through these lines, the company produces individual pumps, complete pumping systems, individual starters and control boxes, and other necessary components and fittings. The company’s other services include custom fabrication, startup, installation, and repairs for systems and individual products.

    • Steel & O'Brien Manufacturing
      • United States of America Address: 7869 Route 98 Arcade, New York, United States of America

      Company Overview

      Steel & O’Brien was founded in 1990 and operates out of Arcade, New York. Steel & O’Brien is a distributor of standard and custom-machined/fabricated fittings and assemblies. Steel & O’Brien serves the food, dairy, beverage, brewery, winery, distilling, biotechnology, pharmaceutical, cosmetic, personal care, extraction, semiconductor, and water treatment industries. Steel & O’Brien offers a range of products including various fittings, valves, actuators, diaphragm valves, pumps, accessories, sight glasses, strainers, filters, tubing, hangers, and others.

    • Kinnear Specialties
      • United States of America Address: 35863 Industrial Way, St Helens, Oregon, United States of America

      Company Overview

      Kinnear Specialties, Inc. is a family-owned business founded in 1969 and based in Saint Helens, Oregon. Kinear Specialties is a manufacturer of custom hydraulic systems and a distributor of additional hydraulic machines, parts, and accessories. Kinnear Specialties has a broad line of products including hydraulic and pneumatic cylinders, pumps, hydraulic accessories, and accumulators. Complete custom filtering and hydraulic systems are available. Kinnear Specialties, Inc. also provides, design, installation, and repair services for hydraulic parts and systems.

    • G.A. Murdock, Inc.
      • United States of America Address: 1200 S Division Ave, Madison, South Dakota, United States of America

      Company Overview

      G.A. Murdock was founded in 1992 and is based in Madison, South Dakota. The company is both a manufacturer and a distributor of the valve, fitting, and filters to customers around the world. Brands the company carries include Aquate, HM Digital, Relton, and Tomlinson. Through its in-house production, the company molds, extrudes and assembles molding products and turnkey custom plastics manufacturing services under the Mur-lok brand. The company’s other product line offerings include chemicals, instruments, pressure gauges, and tools.

    • Doering Company
      • United States of America Address: 6343 River Road SE, Clear Lake, Minnesota, United States of America

      Company Overview

      Doering Company was founded in 1969 and operates out of Clear Lake, Minnesota. Doering is a distributor for pump-related products for markets such as marine, mining, industrial, energy, aerospace, forestry, and agriculture. Doering’s product lines include cartridge valves, hydraulic hand pumps, manifolds, mobile and agricultural valves, and hydraulic valves. Cartridge valves include directional control, flow control, pressure control, and load holding. Hydraulic hand pumps include dual-stage hand pumps and single-stage hand pumps. Manifolds and accessories include custom designs based on customer needs. Mobile and agricultural valves include directional-control and lock valves.

    • Industrial Specialties Mfg., Inc.

      • Industrial Specialties Mfg., Inc.
        Check Valves

      • United States of America Address: 4091 So. Eliot Street, Englewood, Colorado, United States of America

      Company Overview

      Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.

    • Applied Process Equipment, Inc.

      • Applied Process Equipment, Inc.
        Check Valves

      • United States of America Address: 9332 North 95th Way, Suite B 106, Scottsdale, Arizona, United States of America

      Company Overview

      Applied Process Equipment was founded in 1988 and is headquartered in Scottsdale, Arizona. Applied Process Equipment is a distributor of pumps, tanks, and water treatment equipment and services industries across the southwest United States including mining, power plants, waste & waste water, and other industries. Applied Process Equipment products include pumps & lift stations, fiberglass basins & steel tanks, and water treatment & arsenic removal. Water treatment pumps include metering, self-priming, slurry, ANSI, butterfly valves, screw pumps, and more.

    • Metraflex Co.
      • United States of America Address: 2323 W. Hubbard St., Chicago, Illinois, United States of America

      Company Overview

      Metraflex Company was founded in 1958 and is based in Chicago, Illinois. Metraflex is a distributor of piping specialty products to the commercial HVAC industry among others. These are used in vibration isolation, noise dampening, protection against thermal expansion and contraction, pipe alignment, seismic movements, pump connections, and flow conditioning. Metraflex Product categories include metal expansion joints, rubber expansion joints, Metraloop, seismic breakaway hangers, energy saving pump connectors, flexible metal hoses, flexible couplings, valves, compensators, strainers, air vents, pipe guides, anchors, wall penetration seals, and fittings.

    • Asahi/America, Inc.
      • United States of America Address: 655 Andover St., Lawrence, Massachusetts, United States of America

      Company Overview

      Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.

    • TVI Valves
      • United States of America Address: 53 South 7th Street, Emmaus, Pennsylvania, United States of America

      Company Overview

      TVI Valves was originally founded in 1986 and is currently headquartered in Emmaus, Pennsylvania. The company is a distributor of valves and accessories to numerous industries ranging from amusement parks to health care to photography to water purification. The company’s four primary product lines are Plastic Valves, Metal Valves, Instrumentation, and Valve Accessories. Examples of valves include ball, butterfly diaphragm, and plug valves. Valve accessories include actuators, stem extensions, gears, fasteners, and other devices.

    • Custom Gasket Manufacturing
      • United States of America Address: 640 E Palisade Avenue, Englewood Cliffs, New Jersey, United States of America

      Company Overview

      Custom Gasket Manufacturing is based in Englewood Cliffs, New Jersey. Custom Gasket serves several industries such as power generation, lighting, transportation, water & air filtration, food processing, pump & valve, electronics, cryogenic equipment, oil & gas, construction, agriculture, pharmaceutical, pulp & paper, HVAC, as well as others including OEMs. Custom Gasket Manufacturing produces many types of custom products including rubber elbows, rubber diaphragms, insulators, seals, extrusions, and as per their namesake, gaskets. Custom Gasket also offers rubber extrusion, die cutting, rubber molding, water jet cutting, laser cutting, and flash cutting services.

    • MistCooling, Inc
      • United States of America Address: 5001 Front Street, STE 1A, Brookshire, Texas, United States of America

      Distributor Overview

      MistCooling, Inc., founded in 1997, is a supplier of misting systems headquartered in Brookshire, Texas, United States. The company specializes in supplying advanced misting systems for residential, commercial, industrial, and agriculture, and outdoor cooling applications. It offers a variety of mist-fog nozzles, mist fans, portable misting systems, and insect/mosquito control systems. Its misting products are repeatedly chosen to cool distinguished venues such as international sporting events, theme parks, major industrial plants, five-star hotels and resorts, and for military training. Its misting systems utilize ultra-fine water “Mist” droplets to reduce outdoor temperature up to 30 degrees.

    • Dawson-Macdonald Co., Inc.
      • United States of America Address: 845 Woburn St., Wilmington, Massachusetts, United States of America

      Distributor Overview

      Dawson-Macdonald Co., Inc. was founded in 1928 and is headquartered in Wilmington, Massachusetts. Dawson-Macdonald is a developer and producer of production manufacturing equipment, systems, and supplies for surface preparation.Dawson-Macdonald’s product offerings include air filtration equipment, abrasives, air blast equipment, shot blast equipment, wet blast equipment, wheel blast equipment, and vacuum systems. Dawson-Macdonald also offers rental options as well as preventative maintenance, service, and repair both in house or in the field.

    • BKO Technical
      • United States of America Address: 5561 156th Lane NW, Ramsey, Minnesota, United States of America

      Distributor Overview

      BKO Technical, headquartered in Ramsey, Minnesota, is a supplier and distributor of industrial equipment and components. The company provides a diverse range of products, including valves, hydro tools, tube end expander, and couplings. Their offerings cater to industries such as aerospace, water treatment, and manufacturing. BKO Technical's products are utilized for hydrofoaming, tube foaming, and high pressure optimization. They ensure quality and efficient equipment for enhancing operational performance, safety, and productivity in industrial applications.

    • Automated Valve & Equipment Co.
      • United States of America Address: 4000 Trent Ave, Cleveland, Ohio, United States of America

      Distributor Overview

      Automated Valve & Equipment Co. (AVE) was established in 1959 and operates out of Cleveland, Ohio. AVE is a distributor of valves and related products with the ability to provide custom specialty brackets, extension stems, and valve modifications. The valve automation segment features pneumatic control valves, electric control valves, modulating control valves, valve control devices, and remote valve operators. Industrial valves include ball, butterfly, & knife gate valves, gate, globe, & check valves, and control valves & regulators. Specialty valves and Pipe strainers are also available.

    • Marcuse & Son, Inc.
      • United States of America Address: 3501 North Main St Fort Worth, Texas, United States of America

      Distributor Overview

      Marcuse & Son was established in 1925 and operates out of Fort Worth, Texas. Marcuse & Son is a distributor of air compressors and air compressor parts and accessories. Air compressor offerings include reciprocating air compressors and rotary style air compressors. Marcuse & Son’s accessories include air receivers, alternators, belt guards, block heaters, brass valves and fittings, breather vents, compressor lubricants, exhaust mufflers, filters, regulators & lubes, refrigerated air dryers, and water separators.

    • Reasontek Corp.
      • United States of America Address: 565 W. Lambert Rd. #D, Brea, California, United States of America

      Distributor Overview

      Reasontek Corporation was founded in 2009 and is headquartered in Brea, California. The company is a distributor of products that primarily serves the technology and domestic and global oilfield equipment and industrial supplies industries. The company has two primary business segments: accumulator production and oilfield equipment and industrial supplies. The accumulator production segment includes accumulators and other energy storage and surge protection devices as well as CAD services. The oilfield equipment and industrial supplies segment includes bladder accumulators, repair kits, and related accessories.

    • Oil-Air Products, LLC.
      • United States of America Address: 13010 County Road 6, Plymouth, Minnesota, United States of America

      Distributor Overview

      Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.

    • VÁLVULAS, VS
      • Spain Address: Polígono Santelices Nave B/2 MUSKIZ-BIZKAIA, Spain

      Manufacturer Overview

      VÁLVULAS VS, S.L., has been in operation in three decades and is headquartered in Muskiz, Spain, is a manufacturer of stainless steel and alloy valves. The company offers a wide range of products, including DIN valves, ANSI valves, and bottom drain valves. It also provides filters, sight glasses, accessories, and materials. Its products are used in tanks and vessels to drain liquids from the bottom of the tank. The company is certified ISO 9001/2000 by Lloyd's Register for its quality standards. It serves the chemical and petrochemical industries.

    • ELITE LINE
      • Taiwan Address: No.40, Jialing St., Qianzhen Dist., Kaohsiung City, Taiwan

      Manufacturer Overview

      Elite Line Industrial, also known as Z-Tide Valve, is a manufacturer of pressure control valves, established in 1978 and located in Kaohsiung City, Taiwan. Its product line encompasses pressure reducing valves (PRV), pressure relief valves, pressure sustaining valves, water hammer arresters, among others. The company also offers exclusive design and smart functionality for easy installation, using advanced CNC precision equipment. The company holds quality certifications such as ISO9001, CE0035, UL, ACS, and ATEX approvals. Serving industries including semiconductors, water works, fire protection, and building sectors.

    • KSB SE & Co. KGaA
      • Germany Address: Johann-Klein-Str.9, Frankenthal, Germany

      Manufacturer Overview

      KSB SE & Co. KGaA is a Frankethal (Pfalz), Germany-based manufacturer and supplier of pumps, valves, valve actuators, and valve & pump automation equipment since 1871. Its valve product portfolio is composed of globe valves, control valves, diaphragm valves, swing check valves, and lift check valves with a diameter of 15-4000 millimeters and a nominal pressure of PN 6-500. They offer various types of pumps including ring-section, dry-installed, barrel pull-out, vertical shaft submersible, and submersible motor & borehole pumps. The company offers products used in various applications including chemical production, water technology, mining, building services, oil & gas technology, and water technology.

    • ARAKO spol. s r.o
      • Czech Republic Address: Hviezdoslavova 2897/18, Opava, Czech Republic

      Manufacturer Overview

      ARAKO spol. s r.o, a company established in 1953 and based in Opava, Czech Republic, is a manufacturer and supplier of valves. The company's range of products includes valves for nuclear energetics, swing check valves, and blowdown valves. These products are used in various industries, including nuclear power generation, chemical processing, and water treatment and distribution. The company is ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certified, with sales and distribution partners in various countries including Russia, Vietnam, and Bulgaria.

    • RICHTER CHEMIE-TECHNIK GMBH
      • Germany Address: Otto-Schott-Str. 2 Kempen, Land Nordrhein-Westfalen, Germany

      Manufacturer Overview

      RICHTER, founded in 1957 and based in Kempen, North Rhine-Westphalia, Germany is a manufacturer of corrosion-resistant pumps and valves. The company's products are used in the base chemical industry, pharmaceuticals, semi-conductors and photovoltaics, transportation, food and beverage, and pulp and paper. Numerous accolades and certificates, together with inspections conducted by impartial organisations, highlight the company’s quality and dependability. The company is a unit of IDEX Corporation. It is specialised in producing centrifugal magnetic drive pumps, centrifugal mechanically sealed pumps, ball and butterfy valves, sight glasses, and aliding stem valves.

    • URACA GmbH & Co. KG
      • Germany Address: Sirchinger Straße 15 Bad Urach, Germany

      Manufacturer Overview

      URACA GmbH & Co. KG, founded in 1893 and headquartered in Bad Urach, Germany, is a manufacturer and system provider of pump and high-pressure technology. The company's product range encompasses high-pressure plunger pumps, hydraulic plunger pumps, and high-pressure cleaning systems. These products find application in diverse industries including municipal service providers, contract cleaners, and industrial processes within refineries, chemical, and pharmaceutical systems. The company also provides rental machines and customizes drive and automation technology to optimize high-pressure applications efficiently.

    • MHA Zentgraf
      • Germany Address: Ballerner Strasse 8 66663 Merzig, Germany

      Manufacturer Overview

      MHA ZENTGRAF, established in 1945 and headquartered in Saarland, Germany, is a manufacturer of high-pressure ball valves and flow control valves. The company provides fluid dynamic solutions, including a wide range of ball, needle, and check valves for various industries, including automotive, energy, marine, and more. It offers a comprehensive service package, from consulting and custom product development to production and installation, ensuring tailored solutions for controlling, throttling, or locking fluids. MHA LOGISTICS, a subsidiary within the MHA Group, handles the logistics and shipping, ensuring efficient packaging and dispatch of goods.

    • Highlight Tech. Corporation
      • Taiwan Address: No. 8, Huoshui Rd., Xinshi Dist., Tainan City, Taiwan

      Manufacturer Overview

      Highlight Tech. Corporation, established in Tainan City, in 1977 is a manufacturer engaged in vacuum valves, gate vales and vacuum components for ultra-high vacuum environment process engineers. The company's product range includes LED, Touch flat panel display, semiconductor, optoelectronics technology and film vacuum coating. The company has service locations in Taiwan, China and worldwide representatives in Europe, Asia, The USA and Australia. In 2022 the company entered the Chinese market by selling the equipment of Thin-film Photovoltaic, developed by HTC.

    • Blucast
      • Lithuania Address: BLUCAST UAB, Zirmunu str. 66, VILNIUS, Lithuania

      Manufacturer Overview

      Blucast, established in 2007 and headquartered in Vilnius, Lithuania, is a manufacturer that specializes in providing a range of ductile iron valves and fittings. The company offers a range of products that include ductile iron valves and fittings, as well as castable resins for the jewelry industry. It also offers other items such as copper vacuum insulated bottles. Its resin is shrinkage-free, ensuring dimensional stability over time. It serves two different industries, the jewelry industry and the water supply sector.

    • Prevost UK Ltd.
      • United Kingdom Address: Tower Business Park, Commercial Rd,Darwen BB3 0FJ, United Kingdom

      Manufacturer Overview

      Prevost UK Ltd. , based in Annecy-le-Vieux, France, is a designer and manufacturer of compressed air and fluid distribution solutions. Its product range includes quick safety couplings, piping networks, filtration solutions, and pneumatic equipment. Notably, the company introduced the industry's first push-button coupling with a square button and launched the first composite "anti-hose whip" safety coupling, and the pure aluminum compressed air network called Prevost Piping System (PPS) in 2017. Its offerings are utilized for safety, efficiency, and the preservation of air and fluid quality.

    • Valvoindustria Ing. Rizzio S.p.A.
      • Italy Address: Via Circonvallazione 10 Valduggia, Italy

      Manufacturer Overview

      Valvoindustria Ing. Rizzio S.p.A., established in 1971 and headquartered in Valsesia, Italy, is a manufacturer that manufactures valves for plumbing, HVAC, irrigation, and industrial applications. The company offers a wide range of products, including valves, gate valves, plumbing fixture fittings, and trim products. It also provides flexible joints, air vents, and polypropylene. Its valves allow for a quicker and easier installation than the more traditional methods of soldering and threading. The company has achieved ISO 9001:2008 for its quality system. It serves a wide range of industries such as plumbing, HVAC, and irrigation.

    • DropsA S.p.A.
      • Italy Address: Via Benedetto Croce, 1 Vimodrone, Italy

      Manufacturer Overview

      DropsA S.p.A., headquartered in Milan, Italy, has been a centralized lubrication system manufacturer since 1946. The company offers a range of products, including automatic and manual pumps, dual-line and progressive dividers, control devices, and auxiliary components. These products are designed for various types of lubrication, such as grease, oil, and air/oil, aimed at improving the efficiency of various industrial production systems while reducing maintenance costs. These are utilized across diverse industries, including mining, construction, railways, textiles, and energy.

    • Athena Engineering
      • Italy Address: SETTIMO MILANESE MI,21/C,VIA LUIGI GALVANI, Lombardia, Italy

      Manufacturer Overview

      Athena Engineering S.R.L., established in 1984 with headquarters in Italy, is a manufacturer of industrial valves, pumps, and filtration systems. The company has five product brands: Athena for valves and level gauges; GE-STAR for industrial pumps; ROSITATECH for process control instruments; ASAPHTECH for filtration systems; and Valentech for actuators. The company's valve equipment includes ball valves, butterfly valves, strainers, and control valves. The company's industrial equipment and solutions are used in power generation, oil and gas, water distribution, mining, and the chemical industries, as well as other fields. It also provides engineering services that include consulting, commissioning, automation, and maintenance.

    • Maran e Peracini S.r.l.
      • Italy Address: Via Valduggia, 25 Borgosesia Vercelli, Italy

      Manufacturer Overview

      Maran e Peracini S.r.l. is an Italian manufacturer of cast iron valves that was established in Borgosesia in 1963. The company’s product lineup includes non-rising stem as well as rising stem cast iron gate valves, lift and swing cast iron check valves, and threaded as well as flanged cast iron foot valves. It also offers cast iron strainers in different sizes, types, and standards. The company’s products are used mainly by clients in the water treatment, agricultural, marine, and industrial processing sectors.

    • MAGDEBURGER INDUSTRIEARMATUR-MANUFAKTUR GMBH
      • Germany Address: Werner-Heisenberg-Straße 33 39106 Magdeburg, Germany

      Manufacturer Overview

      Magdeburger Industriearmatur-Manufaktur GmbH, established in 1970 and headquartered in Magdeburg, Germany, is a manufacturer of industrial valves and actuation solutions. The company's products include special application valves, standard application valves, and custom-designed solutions. Its expertise lies in producing valves in small batches, ensuring rigorous quality standards and safety. Its products serve in petrochemical, offshore, and mining industries. The company leverages in-house research and development capabilities, utilizing modern CAD and CFD tools for 3D design.

      • China Address: DONGSAO VILLAGE,JIANGBEI AREA, NINGBO, Ningbo, Zhejiang, China

      Manufacturer Overview

      Ningbo Yinzhou Plumbing Hardware Co, formed in 2000 and located in Ningbo, United States, is a manufacturer of brass and bronze valves, fittings, and water meters. The company manufactures brass valves, fire hydrants and adaptors, bronze valves, and water meters and parts. It also fabricates brass pipe couplings, bronze couplings, and manifold and radiator parts. It is specifically involved in hydraulic, pneumatic, and industrial ranges. It exports 10 containers each month under the ISO 9001 quality system, consisting of 400 kinds of products.

    • Wenzhou Solid Mechanical Equipment Co., Ltd
      • China Address: No.168, Dongou Street, Wenzhou, China

      Manufacturer Overview

      Wenzhou Solid Mechanical Equipment Co., Ltd., established in 1989 and headquartered in Wenzhou, China, is a manufacturer of hydraulic pumps, oil pumps, and valves. The company offers a range of products, including high and medium-pressure vane pumps, gear pumps, piston pumps, lubricating oil pumps, and more. It also offers centrifugal pumps, diaphragm pumps, butterfly valves, and globe valves. Its lubricating oil pumps allow the pump to start operating without the need for additional oil when the machine is opened. Additionally, it has achieved ISO 90001 certification. The company exports its products to North America, South America, and Western Europe.

    • BEIJING VALVE GENERAL FACTORY CO.,LTD.

      • BEIJING VALVE GENERAL FACTORY CO.,LTD.
        Check Valve

      • China Address: No.3 LvHaiRD, PangGeZhuangTown, DaXingDistrict, BeiJingCity, China

      Manufacturer Overview

      Beijing Valve General Factory Co., Ltd., established in 1952 and headquartered in Beijing, China, is a manufacturer that produces various types of valves. The company's product line includes ball valve, gate valve, globe valve, check valve, and butterfly valve. It also offers a cryogenic valve, a forged steel valve, a water system valve, and an actuated valve. Its product has a fire-safe and anti-static design. The company has achieved ISO9001, API6D, API6A, and API607 certification. It serves various industries, including petroleum, chemical, metallurgy, electricity, and infrastructure construction.

    • Gefa Processtechnik GmbH
      • Germany Address: Germaniastraße 28 D - 44379 Dortmund, Germany

      Manufacturer Overview

      Gefa Processtechnik GmbH founded in Dortmund, Germany, in 1964, is a manufacturer of industrial valves and filtration products. Products offered by the company are valves, fittings, pipe bends, filters, and pumps. Its burst disks rupture at a specific pressure to prevent overpressure incidents. They safeguard equipment and personnel by releasing excess pressure in industrial applications. The company’s products are certified by ISO-14001 and FDA. It is reducing its CO2 footprint and aims to be CO2-neutral by 2030. It also provides custom products, inspection, and repair services to its customers.

    • Ramén Valves AB
      • Sweden Address: Fredsforsstigen 22A Bromma, Sweden

      Manufacturer Overview

      Ramén Valves AB, established in 1945 and based in Sweden, is a manufacturer of Ramen ball sector valves and industrial valves with production facilities in Stockholm and Fagersta. The company manufactures badge meters, pressure regulators, and control valves, supplying various industries such as chemicals, fertilizers, mining, minerals, and industrial gas. The company's valves, which feature circular to elliptical openings, are designed to mitigate dewatering and clogging issues. In 1978, the company expanded its product portfolio by incorporating industrial control valves and regulators sourced from various brands.

    • Mival S.r.l.
      • Italy Address: Via Montecastello, 53 Serravalle Sesia VC, Regione Piemonte, Italy

      Manufacturer Overview

      Mival S.r.l., established in 1967 and based in Italy, is a manufacturer of industrial valves. The company is highly specialised in bellow valves. The company's products are built according to EN and ANSI regulations. It’s goods are used in sectors like steam and diathermic oil, chemical, pharmaceutical, petrochemical, and food boiler systems. Due to the company's concern for the environment, a 172-kW solar system has been built on the factory roof. The company specialised in making sediment collection strainers, gate valves, joints, butterfly and ball valves, and valves for drinking water. It holds ISO 9001:2008 certification.

    • FROMME ARMATUREN VERTRIEB GMBH & CO. KG
      • Germany Address: Hauptstraße 12 Haverlah, Germany

      Manufacturer Overview

      Fromme Armaturen Vertrieb GmbH & Co. KG is based in Haverlah, Germany, and is a manufacturer of cast steel as well as stainless steel industrial fittings that was established in 1982. The company’s product lineup includes globe, check, gate, butterfly, and ball valves. It also offers steam traps, sight glasses, flanges, gaskets, and strainers. These are produced to both Deutsches Institut für Normung (DIN) as well as American National Standards Institute (ANSI) manufacturing standards. The company’s products are used mainly by its clients in the petrochemical, power generation and distribution, wastewater processing, and beverage industries.

    • Ridart Srl
      • Italy Address: Via Adua, 17 21045 - Gazzada Schianno Varese, Italy

      Manufacturer Overview

      Ridart SRL, founded in 2007 and headquartered in Gazzada Schianno, Varese, Italy, is a manufacturer of safety valves and fluid couplings. The company's product line provides solutions for safer and cleaner hydrocarbon and chemical fluid transfers and storage tank management, including overfill prevention valves, quick-dry accessories to prevent leaking during fluid transfer, and PTFE caps for mobile tank systems. It also offers custom design, engineering, and production for OEM, ODM, and private label clients.

    • AB Trasmissioni Srl
      • Italy Address: Via del Curato, 35, Cento FE, Italy

      Manufacturer Overview

      AB Trasmissioni Srl, founded in Italy in 1975, is a manufacturer of automation solutions, heaters, and motor accessories that are used in power generation, automation, irrigation, railway, and marine applications. The company's product portfolio couplings and adapters, electrical equipment, and motor accessories. In 2014 it took over ELEBERG, integrating specialised measurement instruments and electronic components for civil and industrial applications into its production and marketing, and in 2018 it opened a new production plant in Italy.

    • Pascal Corporation.
      • Japan Address: 14-7, Konoike 2-chome, Itami, Hyogo, Japan

      Manufacturer Overview

      Pascal Corporation, founded in 1974 and based in Hyogo, Japan, is a manufacturer of automation equipment and systems. Its product range includes work clamping systems, gas springs, injection mold machines, and pallet clamps, catering to various industrial applications. Additionally, it offers die casting machines, press machines, auto couplers, and a selection of robot products, including expansion clamps, gas balancers, and tool changers. Its offerings find utility across industries, enhancing manufacturing processes, ensuring precision, and optimizing efficiency in workholding, and material handling. Since 1999, the company has maintained ISO9001 certification for its quality management system.

    • STÖHR ARMATUREN GmbH & Co KG
      • Germany Address: Dornierstraße 4, Königsbrunn, Germany

      Manufacturer Overview

      Stöhr Armaturen GmbH & Co KG, founded in 1938 and based in Königsbrunn, Germany, is an ISO 9001 certified manufacturer of valves for gases in liquid and gaseous state. Some of the products it stocks include ambient, cryogenic, and control valves ranging from DN4 to DN300. The valves can handle cryogenic temperatures of down to 4K and high-pressure levels of up to 1,000 bars. In 1947, the company began the development of cryogenic valves for liquid gases, and in 1960, it introduced stainless-steel valves and valves with bellows for safe sealing.

    • HEROSE GMBH Armaturen und Metalle
      • Germany Address: Elly-Heuss-Knapp-Straße 12, Bad Oldesloe, Germany

      Manufacturer Overview

      HEROSE GMBH is a manufacturer of specialty valves established in 1873 and based in Bad Oldesloe, Germany. The company produces various valves for industrial gasses and fluids, such as cryogenic liquefied industrial or natural gasses. These include pressure regulators, cryogenic safety valves, and free discharge safety valves. Aside from its products, the company also offers custom valve engineering services using VALVIO design and analysis software for its clients with unique project specifications.

    • KEIHIN CO., LTD
      • Japan Address: 1-1-6 Higashi Kanagawa, Kanagawa-ku, Yokohama-shi, Kanagawa, Japan

      Manufacturer Overview

      KEIHIN CO., LTD, founded in Japan, in 1953 is a manufacturer of industrial valves. The company's product portfolio includes ball valves, ate valves used for isolating and regulating the flow of liquids, gases, and slurry, Check Valves, Pressure Relief Valves, and diaphragm valves used for sterile and aseptic applications in the pharmaceutical and food industries.Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense.

    • Tecnidro srl
      • Italy Address: Via Girolamo Gastaldi 26F Genova GE, Regione Liguria, Italy

      Manufacturer Overview

      Tecnidro SRL, established in 1987 and headquartered in Genova, Italy, is a designer, manufacturer, and supplier of water flow management equipment and systems. The company's products include water pumps, tangential water meters, and electric deluge valves. It offers solutions for fire protection systems, agricultural irrigation, and mining. It also manufactures the largest control valve in the world, reaching a nominal diameter of 1400 mm (56”). Its systems are used in commercial buildings, fuel stock plants, and waste supply plants.

    • VUOTOTECNICA S.r.l.
      • Italy Address: via per Olgiate Molgora 27 Beverate di Brivio Lecco, Italy

      Manufacturer Overview

      VUOTOTECNICA S.r.l. is an ISO 9001:2015-certified Italian manufacturer of vacuum systems for industrial applications that was established in Brivio, Lecco, in 1975. The company’s product lineup includes vacuum cups such as bellows or flat models, rotary vane vacuum pumps, and vacuum valves such as solenoid valves. It also offers vacuum grippers, and related accessories such as vacuum suction spiders and vacuum conveyors. The company’s products are used by clients in the industrial manufacturing, industrial packaging, and industrial automation sectors.

    • Xiamen Landee Industries Co., Ltd.
      • China Address: SUITE 2201, HUITENG METROPOLIS, NO. 321 JIAHE ROAD, XIAMEN, China

      Manufacturer Overview

      Xiamen Landee Industries Co. Ltd., established in 1994, is an industrial components manufacturer based in Xiamen, China. It releases a new flow control model on a monthly basis and produces over 50 types of compononts, including pipes, valves, flanges, pipe fittings, and gaskets, in over 20 materials and 400 sizes. The company's products are used in the oil rig, gas, chemical, pharmacuetical, and paper-making industries, and it complies with API, CE, and ISO 9001:2008 certification requirements.

    • ABSOLUTE OZONE
      • Canada Address: 10712 181 Street, Edmonton, Alberta, Canada

      Manufacturer Overview

      ABSOLUTE OZONE, founded in 1995 in Edmonton, Alberta, is a manufacturer of commercial and residential ozone generators, ozone sensors, monitors, tubes, and fittings. The company's ozone generators are ideal for applications such as drinking water treatment, food disinfection, air purification, soil remediation, and pharmaceutical processes. Its products also include ozone analyzers, ozone spray containers, flow meters, venturi injectors, and air compressors. Industries served include automotive, food, bottling water, agriculture, textile, laundry, and many more. The company is CE certified and RoHS compliant.

    • Pister Kugelhähne GmbH

      • Pister Kugelhähne GmbH
        valve

      • Germany Address: Vogesenstrasse 37, Muggensturm, Deutschland, Germany

      Manufacturer Overview

      Pister Kugelhahne GmbH, founded in 1961 and headquartered in Muggensturm, Germany, is a manufacturer of metal valves and fluid technology. The company's products include high-pressure shut-off ball valves, stainless steel ball valves, and flanged ball valves. These products are used in hydraulic breaking systems for windpower stations and to meet the pressure requirements of shipbuilding and firefighting equipment. It also offers multicoupling systems primarily designed for agriculture equipment and earth-moving machinery that used high-pressure hydraulics.

      • China Address: Binhai park, Longwan District , Wenzhou City, Zhejiang Province, China

      Manufacturer Overview

      Zhejiang Jieyu Valve Co. Ltd., founded in 2002 and headquartered in Wenzhou, China, is a manufacturer and supplier of industrial valves and related equipment. The company offers over 70 categories of products that include gate valves, straight globe valves, and strainers. These products are used for industrial plants, such as food processing, chemical processing, and pharmaceutical production. It serves a diverse range of industries that include power generation, shipbuilding, and environmental protection, with annual sales from exports of over $30 million per year.

    • ZETKAMA
      • Poland Address: ul. 3 Maja 12, Ścinawka Średnia, Lower Silesia, Poland

      Manufacturer Overview

      ZETKAMA, established in 1946, is a manufacturer of Industrial Valves and Iron Castings based in Scinawkda Srednia, Poland. The company offers various types of valves including Stop Valves, Butterfly Valves, Strainers as well as Ball Valves, and Rubber Expansion Joints. ZETKAMA specializes in the production of Grey Cast Iron Castings and various types of Nodular Cast Irons. The company also has its own Iron Foundry and is able to adapt patterns, both in 2D and 3D, to customer specifications.

    • Steam Equipments Pvt Ltd
      • India Address: 44, TINY INDUSTRIAL ESTATE KONDHWA BUDRUK, PUNE, Maharashtra, India

      Manufacturer Overview

      Steam Equipments Pvt. Ltd., established in 2004 and based in Pune, Maharastra, India is a manufacturer of Steam and Water Analysis Systems (SWAS), Continues Emission Monitoring System (CEMS). The company also produces Ambient Air Monitoring Systems (AQMS), water and waste water monitoring, flow metering, vibration monitoring systems (VMS), and moisture and dew point monitoring systems. It provides whole systems that comprise software, SCADA, PLC, and shelter or container-based solutions for safe or hazardous areas. The company has construction and/or testing facilities in Pune, Bangalore, South Africa, the UAE, the USA, and Singapore.

    • VALSTEAM ADCA ENGINEERING S.A.
      • Portugal Address: Zona Ind.da Guia, Pav.14 - Brejo PBL PT Guia, Portugal

      Manufacturer Overview

      Valsteam ADCA Engineering S.A. is a manufacturer of industrial fluid and steam handling equipment that was established in Guia, Pombal, Portugal in 1986. The company’s products include control valves for pressure or temperature regulation, steam traps for removing condensate from industrial processes, and heat exchangers. These are marketed under the brands ADCATrol, a product line optimized for automation, and ADCAPure, a product line optimized for high purity standards. The company’s products are commonly used by clients in the pharmaceutical, petrochemical, and food and beverage industries.

    • IMI Critical Engineering
      • United Kingdom Address: Lakeside, 4040 Solihull Pkwy, Birmingham, United Kingdom

      Manufacturer Overview

      IMI Critical Engineering is a manufacturer of flow control systems and valve solutions established in 1862 and based in Birmingham, United Kingdom. It manufactures high and medium-pressure valves, such as pressurizer safety, compressor, turbine bypass, chemical, and steam valves. Its products are utilized in oil and gas, marine, petrochemicals, sanitary, and life sciences sectors across Sweden, Germany, Austria, China, and the USA. Its manufactured products are ISO 9001:2000 certified and adhere to the standards of OSHA and European Pressure Ratings. The company is part of IMI plc, an engineering company in England, and has received the Global Supplier Awards in 2022.

    • Henry Group Industries Ltd
      • China Address: Suite 3206, 32/F, Tower 6, The Gateway Harbour City, 9 Canton Rd Tsim Sha Tsui, Kowloon Hong Kong, China

      Manufacturer Overview

      Henry Group Industries, established in 1914 and based in Harbour City, Tsim Sha Tsui, Hongkong is a manufacturer of components for the commercial refrigeration and air conditioning industry. The company is international, with operations in Australia, China, Germany, the United Kingdom, and the United States. The company's products include automatic controls, fan motors, filters and dryers, heat exchangers, and safety devices. Its pressure vessels meet CE, UL/ASME, AS1210, and TSG codes. The goods of the company are fully compliant with ISO 5149 certification. Each component has a unique QR code for identification.

    • InterApp AG
      • Switzerland Address: Grundstrasse 24 Rotkreuz, Zug, Switzerland

      Manufacturer Overview

      InterApp AG is based in Rotkreuz, Switzerland, and is a manufacturer of industrial valves and actuators that was established in 1969 as a member of the AVK Group of companies. The company’s products include ball valves for high purity or corrosive media, butterfly valves for standard industrial applications, and check valves designed to prevent backflow. It also offers pneumatic and electric actuators for controlling valves. The company is certified to ISO 9001, ISO 45001, and ISO 50001 standards. It chiefly serves clients in the mining, power generation, and chemical industries.

    • FLAPCON VALVES
      • Turkey Address: Abdurrahmangazi Mahallesi, Sevenler Caddesi, Sinpas Egeboyu Sitesi, Ticari E Blok, Kat:4 No:16 Samandira Sancaktepr Istanbul, Turkey

      Manufacturer Overview

      FLAPCON, established in 2017 and headquartered in Istanbul, is a manufacturer specializing in a diverse range of industrial valves. Its product portfolio encompasses industrial valves, actuators, accesssories, connectors, instruments. These products cater to various industries, including oil and gas, chemical, mining, power generation, and water treatment. The company's products are crucial components in controlling fluid and gas flows across applications like pipelines, processing facilities, and industrial machinery, ensuring efficient and safe operations.

    • SAPAG VALVES
      • France Address: 2 Rue du Marais Ham, France

      Manufacturer Overview

      Sapag Valves, founded in 1849 and headquartered in Ham, France, is a manufacturer of customizable industrial valves, including butterfly and ball valves ranging from DN8 to DN3000. The company is ISO 9001, ISO 14001, and ISO 45001 certified and operates in more than 70 countries worldwide. It started producing valves in 1929, and it is in the valves division of the French-Swiss IPI Group. The company stocks valves under different brand names, including Gachat, Monovar, and Clasar, and also provides various services for all types of valves, including repair, supply of original spare parts, and curative maintenance.

    • Belven nv
      • Belgium Address: Blokhuisstraat 24 Mechelen, provincie Antwerpen, Belgium

      Manufacturer Overview

      Belven, established in 1974 and based in Belgium, is a manufacturer of valves. The company provides solutions for the construction and industrial markets and is active in more than 50 countries. It is specialised in making ball valves, butterfly valves, check valves, expansion joints, and knife gate valves. With a particular chemical tank storage solution, the company has created industry-specific solutions like BV4-BLEED, BV4-RECOVERY, and BV4-CONTROL. The butterfly valves are often provided with white EPDM with an FDA certificate. The ISO-9001:2015-certified company also holds the EAC and GOST-R certificates.

    • VAG
      • Germany Address: Carl-Reuther-Str. 1, Mannheim, Germany

      Manufacturer Overview

      VAG GmbH, founded in 1872 with headquarters in Germany, is a manufacturer of valves for infrastructure projects. The company's products include butterfly valves, house connection valves, gate valves, control valves with own-medium control for the regulation of pressure and flow rates in service areas, and electric check pump control valves. The company serves infrastructure projects such as water treatment and distribution, wastewater management, dams, and power stations. Services offered include commissioning, training, maintenance, on-site service, and the supply of original spare parts.

    • Uni Klinger Limited
      • India Address: Kohinoor Estate, SC 1, 5th Floor, Opp. Bajaj Garden, Khadki, Pune, India

      Manufacturer Overview

      Uni Klinger Limited, established in 1983 and headquartered in Maharashtra, India, is a manufacturer of flow control equipment, fluid sealing solutions, and steam engineering products. The company offers a wide range of products, including piston valves, bellow seal valves, steam traps, strainers, and more. It also offers liquid-level gauges, safety valves, and control valves. Its products are designed to meet the potential hazards and critical safety needs of chemical processing. Moreover, the company has achieved ISO 9001:2015 certification. It serves a wide range of industries, including power, sugar, refineries, chemicals, fertilizer, and more.

    • Intertubi Spa
      • Italy Address: Via Orzinuovi, 57, Brescia Brescia, Italy

      Manufacturer Overview

      Intertubi SPA, established in 1986 and headquartered in Brescia, Italy, is a manufacturer that specializes in the production and distribution of fittings, valves, and flanges. The company offers various products, including butt welding fittings, forged flanges, valves, and more. It also offers threaded fittings and hydroformed tees. Its threaded fittings offer easy installation and disassembly for connecting pipes. The company has achieved UNI EN ISO 9001 and UNI EN ISO 14001 certifications. It serves various industries such as the oil and gas, petrochemical, and energy sectors.

    • Marck & Care Engineers Ltd.
      • India Address: No. 8 - 9, Third Floor, 59, Rani Jhansi Road Jhandewalan Mandir, New Delhi, Delhi, India

      Manufacturer Overview

      Marck & Care Engineers Ltd., founded in 1999 and located in New Delhi, Delhi, India, is a manufacturer, exporter, and supplier of industrial valves, sight glasses, automotive strainers, and steam traps. The company’s product catalog includes thermodynamic steam traps, industrial valves and valve fittings, butterfly valves, ball valves, and industrial pipe and tube fittings. Others are knife gate valves, globe valves, lined valves, gate and sluice valves, and pipeline accessories. These valves are used in industries, such as pharmaceutical, petrochemical, oil and gas, food and beverage, and more.

    • Airwork Pneumatic Equipment s.r.l.

      • Airwork Pneumatic Equipment s.r.l.
        VALVES

      • Italy Address: Via Piemonte, 3/5, Carate Brianza, Italy

      Manufacturer Overview

      Airwork Pneumatic Equipment S.R.L., founded in 1998 with headquarters in Italy, is a UNI EN ISO 9001 and 14001 certified manufacturer and supplier of pneumatic assemblies and stand-alone components for industrial automation. The company's expanding portfolio of products includes pneumatic tubes, compact guide cylinders, precision air treatment units, and an extensive array of application-specific valves. The company's customized design and manufacturing services are available on demand as well as through pre-engineered solutions, such as the company's customizable electro-pneumatic control panels and switchboards for automation process control.

    • Formatura Iniezione Polimeri S.p.A.
      • Italy Address: Loc. Pian di Parata Casella Genova, Italy

      Manufacturer Overview

      Formatura Iniezione Polimeri S.p.A. is based in Casella, Genoa, and is an Italian manufacturer of thermoplastic valves and fittings founded in 1954 before being acquired by the holding company Aliaxis. The company produces a wide range of solvent threaded piping systems, variable area flowmeters, and conductivity measurement devices. It also offers plastic manual or actuated valves, as well as compression fittings. The company's products are primarily used by chemical processing plants, water or wastewater treatment facilities, and power distribution corporations, with additional applications in the HVAC, fire prevention, and food production sectors.

    • Alco Valves Group
      • United Kingdom Address: Unit AR2, Armytage Rd, Brighouse HD6 1PT, United Kingdom

      Manufacturer Overview

      Alco Valves Group, founded in the UK in 1977, is a manufacturer of valves for the oil and gas industry. The company's product range includes a wide range of control valves designed to regulate the flow, pressure, and temperature of various fluids and gases, ball valves, including floating and trunnion-mounted designs, butterfly valves for general-purpose and special applications, and check valves, including swing, lift, and dual-plate types, engineered to prevent reverse flow.

    • Rattiinox S.r.l.
      • Italy Address: Via Mara, 44 Mariano C.se Como, Lombardia, Italy

      Manufacturer Overview

      Rattiinox S.r.l., founded in 1970, is a manufacturer based in Mariano, Lombardia, Italy, producing stainless steel components for the alimentary, chemical, and pharmaceutical industries. The company complies with European standards AISI 316L 1.4404 and 1.4435-BN2, offering clean and aseptic design (CAD) valves that include bottom tank, process, and tightness control (TC) connectable valves. It also offers tri-clamp fittings for zero dead leg (ZDL) connections suitable for components like valves, membrane manometers, and rupture discs. To cater to specific customer needs, it employs computer numerical control (CNC) machines to manufacture customized components and devices.

    • RedFluid
      • Spain Address: Carrer Foc 5 08227 Terrassa Barcelona, Spain

      Manufacturer Overview

      RedFluid, established in 1985 and headquartered in Barcelona, Spain, is a manufacturer that specializes in manufacturing and stocks valves and fittings. The company specializes in needle, check, ball valves, customizing dimensions, connections, and more. It also offers needle-regulating valves suitable for instrumentation circuits. Its needle valves are resistant to both hot and cold temperatures. Furthermore, the company is ISO 9001:2015 certified. It serves various industries, including medical, aerospace, and alternative fuels.

    • DRAC ENGINYERS SL
      • Spain Address: Camí de Sant Bartomeu 66C, Polígono Industrial La Valldan, Berga, Barcelona, Spain

      Manufacturer Overview

      DRAC Enginyers is a Spanish manufacturer of pipeline components established in 2009 and is based in Berga, Barcelona. Under the brand name DRAC DT, the company offers a wide range of valves, strainers, and pipeline accessories. These include duplex basket strainers, mud box strainers, and bellows with standard or sealed stop valves. Aside from its products, the company also offers custom engineering services for clients with unique project requirements or use cases.

    • SAFI
      • France Address: 13, Av Jacques Moison - BP1, Taulignan, France

      Manufacturer Overview

      SAFI is an ISO 9001-certified manufacturer specializing in corrosion-resistant plastic valves that was founded in 1963 and headquartered in Taulignan, France. The company specializes in producing industrial-grade, anti-corrosion thermoplastic and composite valves. Its products include butterfly valves that control or isolate the flow of liquids, ball valves for liquids or gasses, and diaphragm valves for sensitive or corrosive materials. It also offers related accessories such as actuators, sight glasses, and strainers. The company's products are mainly used in industrial processing facilities by clients in the petrochemical, water treatment, and power generation sectors.

    • WEH GmbH Verbindungstechnik
      • Germany Address: Josef-Henle-Straße 1 89257 Illertissen, Germany

      Manufacturer Overview

      WEH GmbH Verbindungstechnik is a manufacturer of refueling components for gasses, fuel, and industrial liquids that was established in 1973 in Illertissen, Bavaria, Germany. The company primarily produces shut-off valves for technical gas plants and systems, and quick connectors for pressure or leak testing. It also offers refueling components for hydrogen or natural gas applications, including breakaways, receptacles, and nozzles for dispensing operations. The company is ISO 9001:2015 and ISO 14001:2015 certified, and mainly serves clients in the automotive and aerospace industries.

    • VELJAN HYDRAIR LIMITED
      • India Address: #A18 & 19, APIE, Balanagar, Hyderabad, India

      Manufacturer Overview

      Veljan Hydrair Limited, established in 1965 and based in Hyderabad, India, is a manufacturer of hydraulic pumps, motors, and valves used in several industries, including energy and shipbuilding. The company also provides custom-built power packs and manifolds and is listed on the Bombay Stock Exchange. It has been producing several pneumatic and hydraulic products and systems for over 40 years, and it was the first company in India to manufacture pneumatic products. In addition, its R&D unit is approved by the government of India and constantly expands the existing product range to meet changing market needs.

    • FITOK Group
      • Germany Address: Sprendlinger Landstr. 115, Offenbach, Germany

      Manufacturer Overview

      Fitok Group, established in 1988 and located in Wuhan, Hubei, is a manufacturer that produces general instrumentation valves and fittings. The company offers a wide range of products, including instrumentation valves, fittings, manifolds, filters, and 2D/3D drawings. It also offers hoses, tubing, sampling systems, tooling, and subsea Products. Its product acts as a barrier, preventing active compounds from reacting with or adsorbing to the stainless steel. The company has received ISO 9001:2015, ISO 15848, and ASTM F1387 certification. It serves a wide range of industries such as oil and gas, petrochemicals, thermal power, nuclear power, and hydrogen applications.

    • Rubinetterie Bresciane Bonomi S.p.A.
      • Italy Address: Via M. Bonomi, 1 Gussago, Italy

      Manufacturer Overview

      Rubinetterie Bresciane Bonomi S.p.A., founded in 1901 and based in Gussago, Italy, is a manufacturer of brass ball and butterfly valves. It has expanded its portfolio to include pressure reducers, heating components, and press fittings, and it also accepts OEM requests. It has five divisions, including marine and plumbing, and various ISO certifications like ISO 9001, ISO 14001, and ISO 45001. In 1967, the company was the first to create the patented two-ball valves, and in 2006, it added fittings to its portfolio. It is part of the Bononi Group, and it acquired Fra.Bo in 2019, and Chibro in 2023.

    • DVC - Armatec A/S
      • Denmark Address: Ferrarivej 14 Vejle, Denmark

      Manufacturer Overview

      Dansk Ventil Center A/S, established in 1999 and headquartered in Vejle, Denmark, is a manufacturer that specializes in valves and accessories. The company offers a wide range of products and services related to valves and accessories, including ball valves, butterfly valves, safety valves, steam traps, and strainers. It also offers in-house engineering and assembly services. Its ball valves are cheaper than other types of valves, which makes them a cost-effective option for installation. It serves a wide range of industries such as oil and gas, pharmaceutical, waste water, FnB, and more.

    • Ompi s.r.l.
      • Italy Address: Via Giovanni Falcone, 10/A Borzano di Albinea, Italy

      Manufacturer Overview

      Ompi s.r.l., established in 1994 and headquartered in Reggio Emilia, Italy, is a manufacturer of a vast array of glass containers. The company's product line includes pharmaceutical packaging vials, syringes, ampoules, cartridges, and more. It also provides portable tire inflators, diesel oil equipment, and grease equipment. Its glass vials can be tailored to meet the different needs of biopharmaceutical customers, with full control over geometry and surface chemistry. The company has obtained MID-MI005 and OIML R117-1 certifications and primarily serves the pharmaceutical industry.

    • Deltalab
      • Spain Address: Pol Ind La Llana, Plaça de la Verneda, 1,Rubí, Barcelona, Catalunya, Spain

      Manufacturer Overview

      Delta lab, established in 1976 and headquartered in Rubí, Spain, is a manufacturer that designs and produces labware, including single-use labware. The company's offers a wide range of products, including polyethylene caps, syringes, wash bottles, analytical funnels, and weighting boats. It also provides microbiology, cell culture, molecular biology, hematology, and biochemistry. Its products are tailored to each patient's prescription and position of wear measurements, ensuring that no two pairs of glasses are the same. The company has achieved ISO 9001:2015 and ISO 13485:2016 certification. It serves several industries, including education, laboratory, medical devices, and packaging.

    • TLV CO., LTD.
      • Japan Address: 881 Nagasuna, Noguchi, Kakogawa, Hyogo, Japan

      Manufacturer Overview

      TLV, established in 1950, is a Japan-based manufacturer and supplier of steam engineering products such as fluid control equipment, system products, and maintenance instruments. The company offers fluid control equipment including cyclone separators, steam traps, automatic check valves, manifolds, and pressure-reducing valves used for steam, air, and water piping. The company offers maintenance instruments such as pocket trapman. The company also offers consultation, engineering, services, and the design and construction of steam and power systems. TLV has achieved ISO9001 and ISO 14001 certifications for standardization allowing their products to be used in logistics, building maintenance, chemicals, refineries, and petrochemical industries.

    • Nihon Pisco Co., Ltd.
      • Japan Address: 3-9-32 Osachiizuhaya, Okaya, Nagano, Japan

      Manufacturer Overview

      Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.

    • Stäubli International AG.
      • Switzerland Address: Poststrasse 5, Pfäffikon, Schwyz, Switzerland

      Manufacturer Overview

      Stäubli began in Horgen, Switzerland in 1892. Stäubli designs, produces, distributes, and provides support for products for numerous industries including aerospace, alternative fuels, medical devices, packaging, photovoltaics, and semiconductors. Stäubli has 4 primary product lines including electrical connectors, fluid connectors, robotics, and textile. Electrical connector products include cable couplers, modular connectors, and test and measurement connectors. Fluid connectors include mold clamping systems, quick and dry disconnect couplings, and safety breakaway couplings. Robotics include industrial robots, collaborative robots, and mobile robots. Textile includes weaving preparation and frame weaving.

    • WEH GmbH
      • Germany Address: Precision Connectors, Josef-Henle-Straße 1 Illertissen, Bayern, Germany

      Manufacturer Overview

      WEH Technologies Inc., USA was created in 2008 in Texas as the American branch of WEH GmbH which was founded in 1973 in Germany. The company is a designer and manufacturer of components for the gas and hydrogen refueling industries. The company’s 4 product lines are Quick Connectors, CNG Refueling Components, H2 Refueling Components, and Check Valves. Quick Connectors are used in manufacturing, automation, HVAC, and other industrial uses. CNG Refueling Components are used in CNG vehicles, car stations, and bus stations. Hydrogen Refueling Components are used in hydrogen vehicles and refueling stations.

    • Sunfab Hydraulics AB

      Manufacturer Overview

      Sunfab Hydraulics AB, established in Hudiksvall, Gävleborg, in 1925, is a manufacturer engaged in hydraulic equipment components to operate mobile vehicles. The company's product range includes single flow pump, dual flow pump, hydrologic motors and accessories. The company has subsidiary companies that can be found in Germany, France, UK, Spain, USA and Malaysia. The company export its products to 40 countries and they have technical as well as customer service around the world.

    • Aerre Inox S.r.l.

      Manufacturer Overview

      Aerre Inox S.r.l., founded in 1990 and based in Lombardia, Italy, is a manufacturer of stainless-steel valves and devices. The company offers a range of aseptic and process valves, magnetic stirrers, and custom-made heat exchangers. It also produces fittings and sampling devices for various industrial sectors, such as pharmaceutical, biotechnological, and cosmetic. The company's products utilize CAD-CAM technology and numerical control machines, and they comply with FDA, USP Class VI, and ATEX certifications, ensuring conformity to strict industry standards.

    • Festo Corporation.

      Manufacturer Overview

      Festo Corporation, established in 1925 and headquartered in Esslingen, Germany, is a supplier of automation technology and technical education and is ISO 9001, ISO 13485, and ISO14001 certified. It has around 33,000 catalog products, customized components, and ready-to-install solutions, including grippers, motors, and sensors used in industrial and process automation. The company won the German Future Award in 2010 and serves 300,000 customers worldwide, while its education division provides training solutions for 56,000 industrial companies and educational institutions. It registered €3.81 billion in the 2022 financial year and is available in around 60 countries, with 2,600 patents worldwide.

    • Honeywell

      Manufacturer Overview

      Honeywell, founded in 1906, in Wabash, Indiana is manufacturer of automotive parts, building technologies, and performance and safety materials for aerospace, The company's product portfolio includes electronic guidance systems, cockpit instrumentation, lighting, automotive parts, and primary propulsion and secondary power turbine engines. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. Their headquartere is located in Carolina and they have global sales offices and distributions channels.

    • HANSA-FLEX

      Manufacturer Overview

      HANSA-FLEX, been in business since 1962 and headquartered in Bremen, Germany, is a manufacturer of various types of hydraulic products and services. The company produces hoses, hose fittings, couplings, pipe fittings, and ball valves. It also fabricates hydraulic components, flanges, adapters, and pipes. The variants of its hoses, braided hoses, are oil, high-temperature, ozone, and weather-resistant. It has more than 80,000 parts relating to all aspects of hydraulics. It could also configure the customers’ hose lines based on their required specifications.

    • Generant Inc.

      Manufacturer Overview

      Generant, established in 1930, and headquartered in Butler, New Jersey, is a manufacturer and supplier of valves, pressure regulators, and instrument tube fittings. The company's product range includes pressure relief valves, check valves, needle valves, shut-off valves, and pressure regulators. Catering to various industries such as industrial, medical, and cryogenics, the company's services comprise of quality solutions and technical expertise. Besides, its accreditations include ISO 9001:2015 for quality management, API 6D for pressure relief valves, FM Global Class 1 for fire protection valves, and ASME BPE for cryogenic valves. With a history spanning decades, they consistently uphold good products and services.

    • tecofi.fr

      Manufacturer Overview

      TECOFI, founded in 1985 and based in Corbas, France, is a manufacturer of industrial valves and fittings. Its product range includes butterfly valves for fluid control, knife gate valves for handling thick fluids, resilient seat gate valves used in flow regulation, ball valves for precise control applications, and check valves to prevent backflow. Its products are used in industries such as water and wastewater treatment, power generation, oil and gas, and chemicals. The company is known for its expertise in valve design and production.

    • Dorukendustri.com

      Manufacturer Overview

      Dorukendustri, founded in 2001 and based in Istanbul, Turkey, is a manufacturer of industrial valves and actuators. The company produces registered PROVAL brand products that are accepted and used in more than 90 countries worldwide. Modern CNC machining centres are used in the production and processing of the goods. Using an ERP business resource planning architecture and an ISO 9001:2015 quality assurance system, the plant occupies 10,000 square metres. For traceability, every product has a distinct QR code. The products manufactured by the company are used in the chemical, mining, iron and steel, cement, and marine industries.

    • MARTIN LOHSE GmbH

      Manufacturer Overview

      Martin Lohse GmbH, established in 1908 and headquartered in Baden-Württemberg, Germany, is a manufacturer of steel and stainless steel products for the paper, chemical, and waste disposal industries. The company’s products include shut-off valves, regulating and reject valves, and mechanical engineering solutions. It offers valves with a service-friendly design for easy maintenance and low life cycle costs. The company's products find application in handling various materials, including pulp, granulate, and viscous media. It also provides spare parts, repairs, and test plant provision services.

    • Bray International, Inc.

      Manufacturer Overview

      Bray International, Inc., incorporated in 1986 and headquartered in Houston, Texas, USA, is a global manufacturer of flow control and automation products and accessories Its product line includes butterfly valves, ball valves, knife gate valves, control valves, and check valves. It also offers actuators, cryogenic products, and control accessories, including solenoids, sensors, and switch boxes. The company's performance-tested products meet various global certifications and approvals, including Lloyd's Register, UL, ABS, and more.

    • Famat SA

      Manufacturer Overview

      Famat, established in 1974 and headquartered in Fribourg, Switzerland, is a manufacturer that specializes in valve technology and supplies valve packages. The company offers a wide range of products, including expanding piston technology valves, butterfly valves, gate valves, and check valves. It also offers air and vacuum valves, automatic control valves, control valves with actuators, and ball valves. Its products are based on its patented EPT system, which eliminates the need for O-rings and leaves no dead space. It serves various industries such as water works, power generation, petro-chemical, oil, and pharmaceutical.

    • Haimo Technologies Group Corp

      Manufacturer Overview

      Haimo Technologies (Group) Co. Ltd., established in 1994 and headquartered in Shenzhen, China, is a designer, manufacturer, and supplier of oilfield equipment. The company's products include Exempted Source SP Multiphase Flow Meters, Subsea Multiphase Flow Meters, and a range of fracturing equipment such as joints, valves, and ball injectors. It also supplies its own well refitting and maintenance vehicles, available with equipment that includes skid-mounted cementing units, cement batch mixers, and sand mixers. Its services include well testing, production logging, and the supply of intelligent monitoring systems for oil and gas field operations.

    • Watts.

      Manufacturer Overview

      Watts was established in 1874 and is a manufacturer of water management products based in North Andover, Massachusetts, United States. The company offers various water solutions products such as automatic control valves, gas connection systems, pressure reducting valves, water quality parts, and high purity process piping systems. The products have been used for serving various industries such as healthcare, agriculture, hospitality, commercial, and municipal waterworks. The products have been created under compliance of CSA, NSF International, WQA, BSI, and AGA manufacturing standards.

    • Burkert Fluid Control Systems

      Manufacturer Overview

      Bürkert Fluid Control Systems, founded in 1946 and headquartered in Ingelfingen, Germany, is a manufacturer of liquid and gas measurement and control systems. Its product range includes solenoid valves for fluid power systems, process and control valves for managing flow, pressure, and temperature, pneumatics and process interfaces for automation control, sensors, transmitters, and controllers for measuring physical and chemical parameters, and MicroFluidics solutions for precise fluid control. Its products serve diverse industries like breweries, labs, medical, and aerospace.

    • Lee Company

      Manufacturer Overview

      The Lee Company was founded in 1948 and is headquartered in Westbrook Connecticut. The company manufactures flow metering, fluid pumping, and related products for industries such as aerospace, automotive, power generation, and medical equipment to customers around the world through its global distribution network. The company’s primary product lines include valves, flow restrictors, pumps, and plugs. The company also offers customized products for individual markets to meet specific standards for each industry according to individual customer needs.

    • SLB

      Manufacturer Overview

      SLB was founded in 1926 and is a manufacturer of oil products and equipments based in Houston, Texas, United States. The company manufactures various products such as geopolymer cement-free system, nested multistage compact wellhead, 3D-printed armor, dual-string barrier evaluation, and autonomous directional drilling. The products are used and applied in oil drilling industry. The company has obtained the ISO 14001 certificate in 2020 and complied to HAZWOPER standards for hazardous waste management.

    • BERMAD CS Ltd.

      Manufacturer Overview

      Bermad CS Ltd., founded in 1965 and headquartered in Evron, HaZafon, Israel, is a manufacturer and supplier of water flow and control equipment and systems. The company's products include water control valves, foam concentrate valves, and various connector accessories. These products are used in connected systems for irrigation systems, water supply systems, and wastewater treatment plants. It also provides spare parts and maintenance programs as part of its after-sales services. It serves industries that include mining, agriculture, buildings, and fire protection.

    • Fluidra S.A.

      Manufacturer Overview

      Fluidra S.A., founded in 1969 and based in Spain, is a manufacturer of valves and fittings using thermoplastic materials. The company also distributes its products to irrigation, swimming pools, and industrial markets. With centers in 46 countries and 136 sales branches, the company offers various other products, such as PVC pressure fittings, PP compression fittings, check valves, ball valves, and irrigation fittings. All its products are made by abiding by the ISO 9001 quality standards.

    • Spirax Sarco Inc.

      Manufacturer Overview

      Spirax Sarco is a manufacturer and supplier of steam system solutions, providing products and services to industries, including food and beverage, pharmaceuticals, chemicals, and more. The company was established in the UK in 1888 and has since expanded to over 60 countries worldwide, with its US headquarters based in Blythewood, South Carolina. One of their products is the TD62 Thermodynamic Steam Trap, which offers high efficiency and reliability for condensate removal in steam systems. They received awards like 2019 Innovation Award from the Institute of Chemical Engineers (IChemE) for their EasiHeat engineered system.

    • Tyco Fire Protection Products

      Manufacturer Overview

      Tyco Fire Protection Products, based in Landsdale, Pennsylvania, serves as a manufacturer and supplier of diverse fire suppression systems for various applications spanning commercial, industrial, and residential sectors. Its product line encompasses extinguishing agents, sprinkler systems, and valves. The company also offers piping products, firefighting equipment, and services. Its water-based fire products range from automatic sprinklers, system valves, to electrical devices. Its global technology portfolio comprises several brands, including TYCO, ANSUL, and GRINNELL.

    • BRANDONI S.P.A.

      Manufacturer Overview

      Brandoni Valves, established in 1961, and based in Piedmont, Italy, is a manufacturer of industrial valves. Its diverse product line encompasses shut-off valves, check valves, joints, solenoid valves, and actuators. These quality products find application across diverse industries like water treatment, power generation, oil and gas, and chemical processing. The company's precision-crafted products are tailored to control and regulate fluid and gas flow, ensuring efficiency and quality in critical processes.

    • OUMING VALVE GROUP CO.,LTD.

      Manufacturer Overview

      OUMING VALVE GROUP CO. LTD. is a manufacturer of stainless steel valves and related products that was established in 1983 in Zhejiang, China. The company primarily produces piece ball valves, multi-port ball valves, and automatic ball valves for regulating or controlling the flow of liquids. It also offers various pipe fittings and castings, as well as custom design and manufacturing services for unique projects. The company is certified to CE, API6D, and API607 standards, chiefly serving clients in the natural gas, chemical processing, and water treatment industries.

    • Camozzi Automation SpA

      Manufacturer Overview

      Camozzi Automation SpA is headquartered in Brescia, Italy, and was established in 1964, is a manufacturer specializing in components, systems, and technologies for the industrial automation field. The company offers a broad product range, including electromechanical cylinders, direct and indirect-acting 2/2 - 3/2-way solenoid valves, and pressure switches and vacuum switches among others. It also extends services like software installation, training, and repair and maintenance to its products. These products have applications in industrial automation, life sciences, and cyber-physical systems.

    • Metal Work S.p.A.

      Manufacturer Overview

      Metal Work S.p.A. is an Italian manufacturer of pneumatic components for automation systems that was established in 1967 in Concesio, Brescia. The company produces various pneumatic motion kits, as well as individual pneumatic automation system components. These products include a wide range of specialized valves, actuators, and fittings. It also offers filter regulator lubricator (FRL) units for ensuring clean air in compressed air systems. The company provides additional support via software downloads, CAD-based circuit design tools, and engineering assistance. Its products are mainly used in the industrial manufacturing, wood processing, and packaging sectors.

    • Swissfluid AG

      Manufacturer Overview

      Swissfluid AG, established in 2002 and headquartered in Aargau, Switzerland, is a manufacturer of lined valves and sampling systems for corrosive applications. The company specializes in lining valves and components with engineered plastics to handle corrosive, abrasive, and ultra-pure liquids for food, pharmaceuticals, and semiconductors industries. Its products include ball valves, sampling systems, and sight glasses. Its lined valves control flow in chemical processing and petrochemical plants and regulate fluid flow in corrosive applications such as water treatment and wastewater management. The company's check valves prevent the backflow of corrosive fluids in chemical plants and power generation facilities.

    • Duff-Norton Europe

      Manufacturer Overview

      Duff-Norton Europe, originally founded in 1927 and headquartered in Nogent-l'Artaud, Aisne, France, is a manufacturer of the Rotary Unions brand. The company produces an extensive range of rotary unions, seals, and check valves, which increased considerably after it was acquired by Columbus McKinnon Corporation in 1998. Its products include rotary unions for articulation oscillation movement, sliding ring seals for rotating shafts, and ball check valves. These products are widely used for hydraulic, compressed air, and thermal fluid systems, such as car brake systems, food-processing cooling conveyors, and increasingly for robotic industrial automation.

    • Manufacturer Overview

      FC Technik AG, founded in 2004 and headquartered in Winterthur, Switzerland, is a manufacturer of gas control systems and components, primarily for the steel production industry. The company's primary product lines comprise gas control units, pressure controllers, and temperature- and pressure-compensated MFCs (mass flow controllers) for noncorrosive gases. Its products include booster gas regulation units, SAAC (shroud anti-aspiration control) systems widely used by steel manufacturers, and stainless steel pressure controllers for use in food processing. The company has installed numerous systems worldwide, with notable clients including AK Steel Dearborn, SeAH Besteel, and Saarstahl AG.

    • HAWE Hydraulik

      Manufacturer Overview

      HAWE Hydraulik, founded in 1949, is a manufacturer and retailer of hydraulic machinery, machine tools, and metalworking equipment based in Hannover, Germany. The company’s product portfolio includes electronics, hydraulic units, hydraulic pumps, and engineering systems. Their equipment is used in medical technology, wind turbines, machine tools, and presses. HAWE also offers comprehensive customer services for its products and systems, including training, a service center, emergency help, spare parts & special service.

    • GESTRA AG

      Manufacturer Overview

      GESTRA AG is headquartered in Bremen, Germany, since 1902 as a designer and manufacturer of valve and control systems. The company deals in boiler controls, steam traps, isolation, and control valves. It also offers check valves, strainers, and service control valves. The products have multiple applications in general manufacturing, chemical, power generation, boiler manufacturing, and oil & gas industries. The products are also essential in maximizing system efficiency and minimizing water consumption in the pulp and paper market. Its services include system auditing, project engineering, steam trap surveys, and automatic broiler control.

    • SPX Flow

      Manufacturer Overview

      SPX Flow, established in 1912, is a manufacturer of industrial machinery to solve processing challenges based in Charlotte, North Carolina. The company manufactures various machinery such as mixers, pumps, valves, homogenizers, and heat exchangers. The machinery is used in nutrition, health, mining, construction, and chemical industries. The company provides services such as designing, engineering, and installing turnkey process units or full-scale plants. The SPX Flow brands include Anhydro, Bran+Luebbe, Gerstenberg Schrӧder, Pneumatic Products and Seital Separation.

    • Humphrey Products

      Manufacturer Overview

      Humphrey Products is an American manufacturer of pneumatic and liquid control products originally established in 1901 as General Gas Light Company before rebranding in 1990. Based in Kalamazoo, Michigan, the company produces various items including actuators, solenoid and mechanical valves, pressure regulators, and total air control (TAC) miniature fittings. They also offer design, engineering, and prototyping services for custom projects. Humphrey Products primarily serves clients in the medical, commercial, industrial, and aerospace sectors.

    • Manufacturer Overview

      Wenzhou AEA Valve Co. Ltd. is an API-6D, PED-CE, and TS-certified manufacturer of valves for the industrial sector founded in 2008 and located in Wenzhou, Zhejiang, China. The company offers globe valves for regulating or throttling flow, gate valves for controlling flow in pipelines, and check valves for preventing backflow in complex systems. It also offers ball valves for regulating or controlling pressure, and specialized valves by customer specifications. The company’s products are commonly used by clients in the oil and gas, petrochemical processing, and power generation industries.

    • Tacmina USA

      Manufacturer Overview

      Tacmina USA, established in November 1956 and based in Osaka, Japan, is a manufacturer and distributor of precision pumps. The company's product range includes Smoothflow Pumps, Motor-Driven Metering Pumps, Solenoid-Driven Metering Pumps, Chemical Injection Systems, and Chemical Tanks. These products are essential for accurate and pulse-free fluid transfer in various applications. Serving industries such as batteries and electronics, chemical and biochemical, pharmaceuticals and cosmetics, and water treatments, the company provides expert consultations, product customization, maintenance support, and swift customer assistance.

    • Emerson Electric Co.

      Manufacturer Overview

      Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.

    • Yuken Europe Ltd
      • United Kingdom Address: 51 Spindus Road, Liverpool, Merseyside, L24 1YA, United Kingdom

      Company Overview

      Yuken Europe Ltd., established in 1980 and based in Liverpool, UK, is a manufacturer and supplier of hydraulic equipment and is a global subsidiary of Yuken Kogyo Co., Ltd. The company stocks several products, including valves, pumps, and pressure control products, used in sectors like shipping, subsea operations, and construction. It can also be commissioned to design and build a hydraulic system, and it can work with pressures of up to 200 MPA and 6000 PSI. It supplies Europe, the Middle East, and Africa and also provides technical services like preventative maintenance to prevent system breakdowns.

    • Wouter Witzel EuroValve B.V.
      • Netherlands Address: De Pol 12, CZ Losser, Overijssel, Netherlands

      Company Overview

      Wouter Witzel EuroValve B.V., established in 1966 and headquartered in Overijssel, The Netherlands, is a manufacturer and supplier of industrial butterfly valves and actuators. The company offers a full range of manual control devices, actuators and accessories available for specific conditions. Some of its products are vulcanized bonded concentric butterfly valves, double offset butterfly valves, and dual-plate check. These products are used in pipelines as shut-off valves, control valves, and non-return valves. Its products meet various certifications and approvals, including BSI, Atex, and TNO.

    • Seetru Limited
      • United Kingdom Address: Albion Dockside Works Bristol BS1 6UT, United Kingdom

      Company Overview

      Seetru Limited was founded in 1949 and is headquartered in Bristol, England is a manufacturer of safety relief valves and liquid level gauges. The company offers an array of products including Pressure Relief Valves, sight gauges, and magnetic float by-pass gauges. These valves meet important international standards which include ISO 4126 and ASME Section VIII design codes as well as type test approvals from the National Board. These products have applications in industrial gas suppliers, marine, and petrochemical industries.

    • Shie Yu Machine Parts Ind. Co., Ltd.
      • Taiwan Address: No. 336-16 Hai Pin Rd., Ching Shui Chen, Taichung, Taiwan

      Company Overview

      Shie Yu Machine Parts Ind. Co., Ltd. is a Taiwanese manufacturer and supplier of thermoplastic fluid transfer products that was established in 1973. The company’s product portfolio includes nature ball, compact ball, labcock ball, diaphragm, and butterfly valves. These are available in PVC, PP, CPVC, PPG, PVDF and HDPE with matching fittings. It also offers quick repair couplings, gaskets, gauge valves, and flanges. The company’s products are commonly used in chemical processing, oil refining, water treatment, and irrigation operations, as well as by clients in the mining and textiles industries.

    • Polypipe Italia s.r.l.
      • Italy Address: Pianmercato, 5C-D-H Cicagna, Genoa, Regione Liguria, Italy

      Company Overview

      Effast, a division of Genuit, established in 1984 and based in Genova, Italy, is a manufacturer and distributor of valves and fittings for industrial applications. Its product range encompasses various materials and fittings like ABS, PE, PP-H, and PVC, as well as ball valves, and actuation adaptor fittings. These products serve industries including water treatment and irrigation. The company has earned certifications such as ISO 9001:2015 for Quality Management, ISO 14001:2015 for Environmental Management, and ISO 45001:2015 for Occupational Health and Safety Management, showcasing its adherence to quality and sustainability in its operations.

    • Römheld GmbH Friedrichshütte
      • Germany Address: Römheldstr. 1-5, Laubach, Hessen, Germany

      Company Overview

      Römheld GmbH Friedrichshütte is based in Hessen, Germany, and is a manufacturer and supplier of clamping and handling technology products that was originally founded in 1870 before becoming part of the ROEMHELD Group of companies in 1990. The company offers magnetic clamping systems for clamping molds on presses or punches, hydraulic clamping components for clamping workpieces on machine tools, and related workpiece handling equipment such as rotary consoles. The company chiefly serves Germany’s metalworking and plastics industries, to whom it also provides technical support and onsite services.

    • EISELE GmbH
      • Germany Address: Lise-Meitner-Straße 8/1, Waiblingen, Baden-Württemberg, Germany

      Company Overview

      EISELE GmbH, a company founded in 1939 and headquartered in Waiblingen, Germany, is a manufacturer and supplier specializing in connection technology. The company's product portfolio includes double nipples, sleeves, tubes, push-in fittings, and various other connectors. These products are used in various sectors, including automotive, renewable energy, robotics, filling technology, and machine and plant engineering. The company is ISO 9001:2015 and ISO 14001:2015 certified and has locations and distributors in various countries, including Germany, Austria, the USA, Australia, and others.

    • PONAR Wadowice S.A.
      • Poland Address: ul. Wojska Polskiego 29 Wadowice, Poland

      Company Overview

      PONAR Wadowice S.A., established in 1965 and based in Wadowice, Poland, is a manufacturer and supplier of oil hydraulic elements and systems. The company offers a diverse product catalog, including control cards electronics, directional control valves, hydraulic cylinders, heat exchangers, and accumulators and blocks. It also provides systems such as high-pressure water systems, prediction and monitoring systems, hydraulic systems, and industrial application systems. These products find applications in mining, aerospace, automotive, hydro-engineering, and scientific research.

    • Praher Plastics Austria GmbH
      • Austria Address: Poneggenstrasse 5, Schwertberg, Austria

      Company Overview

      Praher Plastics Austria GmbH is a manufacturer and distributor of industrial piping system products made from technical plastics that was established in Schwertberg, Austria, in 1971. The company produces unplasticized PVC (PVC-U) pipes, fittings, and accessories for a range of industrial applications. It also offers various valves, such as diaphragm, check, and multiport models of different sizes and series. The company is certified to ISO 9001 standards, and chiefly serves clients in Austria’s industrial chemical, water treatment, and biotech industries.

    • ITV GmbH
      • Germany Address: Grafenheider Str. 96a Bielefeld, Germany

      Company Overview

      ITV GmbH is a German manufacturer and distributor of pneumatic components for industrial applications that was established in 1980 in Bielefeld, North Rhine-Westphalia. The company primarily produces valves of different sizes, materials, and types. It also offers various fittings such as push-in fittings, compression fittings, and brass fittings. Its selection of tubes include fluoropolymer, polyamide, and polyurethane tubes. The company’s products are used mainly by the industrial processing sector, as well as by clients in power generation and municipal infrastructure.

    • Bürkle GmbH

      • Bürkle GmbH
        Valves

      • Germany Address: Rheinauen 5, Bad Bellingen, Baden-Württemberg, Germany

      Company Overview

      Bürkle GmbH, founded in 1950 and based in Stuttgart, Baden-Wurttemberg, Germany, is a manufacturer and distributor of samplers, sampling systems, and accessories. The company also produces filling machines, drum pumps, and container pumps for aggressive and dangerous liquids such as acids, alkalis, and solvents. Clients of the company are primarily engaged in the chemical, pharmaceutical, food, luxury food, and environmental protection industries. The company has received certification from a German agency for the certification of management systems-DIN/EN ISO 9001.

    • Oleoweb S.r.l.
      • Italy Address: Via L. Ariosto, 1 - Cadelbosco di Sopra,Reggio Emilia, Emilia-Romagna, Italy

      Company Overview

      Oleoweb S.r.l., established in 2004 and based in Cadelbosco di Sopra, Reggio Emilia, Italy, is a manufacturer and supplier of hydraulic components and valves. The company's product range includes insert valves, check valves, hose burst valves, flow control valves, and in-line valves. These products are utilized in applications like agriculture, earthmoving, lifting movement, and hydraulic components. It serves industries such as agriculture, industrial services, earthmoving, and lifting movement. The company's services include product study, custom component design, realization of specific components, and providing hydraulic expertise.

    • ABASTECIMIENTOS INDUSTRIALES DE VALVULERIA, SL
      • Spain Address: Pol. Matas, C/ Del Plà de l'Olivella s/n Nave 0 Pallejà, Barcelona, Catalunya, Spain

      Company Overview

      ABASTECIMIENTOS INDUSTRIALES DE VALVULERIA, SL is headquartered in Palleja, Barcelona, and was established in 1995 is a manufacturer and supplier of industrial valves. The company offers an extensive product catalog, including stainless steel ball valves, bottom drain valves rising opening, and Y-strainer and sight glass. It extends services like providing specific designs to assemble for automation and schedules delivery of the products to customers. These products have applications in food processing plants, automotive, and petrochemical industries.

    • Sure Flow Equipment, Inc.
      • Canada Address: 5010 North Service Road, Burlington, Ontario, Canada

      Company Overview

      Sure Flow Equipment, Inc. is headquartered in Burlington, Ontario. Sure Flow Equipment is an ISO 9001:2015 certified manufacturer and distributor of industrial valves, strainers, and other fluid control machines used across industries. Sure Flow Equipment’s product lines include various strainers including duplex strainers, valves butterfly valves, bleed rings, joints, and other parts. Sure Flow Equipment provides resources such as videos, technical information, and usage guides to assist customers in installation and operation.

    • HOF Hydraulic

      Company Overview

      HOF Hydraulic is a Thai ISO 9001 certified manufacturer and distributor of hydraulic components established in 1979 and based in Jomthong, Phra Nakhon Si Ayutthaya. The company produces various level and temperature gauges, motors, vane pumps, cartridge kits, and valves. It also offers contract manufacturing of hydraulic components or systems for customers with unique project specifications, as well as on-site maintenance and repair services. The company's products are mainly used in construction vehicles, mining and agricultural equipment, industrial machinery, and marine cranes or winches.

    • Pennant Engineering

      Company Overview

      Pennant Engineering, established in 1985 with locations in the US and India, is an ISO 9001:2008-certified manufacturer of steam traps, pipeline accessories, flow control systems, engineered steam solutions, and other products for the steam and hydronics industries. These solutions are also utilized in various industries, including chemicals, pharmaceuticals, engineering, and power generation. The company exports to over 30 countries worldwide with an extensive distributor network in North America, South America, Africa, and Southeast Asia.

    • Flowserve Corporation

      Company Overview

      Flowserve Corporation, founded in 1790 and headquartered in Irving, Texas, is a manufacturer and supplier specializing in fluid motion and control products. The company's product portfolio includes pumps, seals, valves, energy recovery systems, and decoking systems. These products are utilized across various industries, including power generation, chemical processing, water management, oil and gas, and various general industries. The company also provides customer services, including on-site field services, solutions engineering, system assessments, repairs and maintenance, and training and development.

    • Vatac Valves.

      Company Overview

      Vatac Valves Wenzhou Corp, established in 1987 and headquartered in Wenzhou, Zhejiang, China, is a global manufacturer and supplier of industrial valve solutions. It offers an extensive line of materials, from conventional steel to special alloys such as Monel, Inconel, Hastelloy, and Duplex steel. Its product portfolio comprises ball valves, gate valves, globe valves, butterfly valves, and through conduit gate valves, adhering strictly to international standards like API, ASTM, ANSI, and ISO. The company holds CE certification and ISO 9001:2000 quality management system accreditation and operates within vast manufacturing facilities spanning over 500,000 square feet.

    • Steven Brown & Associates, Inc.

      • Steven Brown & Associates, Inc.
        Check Valves

      Company Overview

      Steven Brown & Associates, Inc., since 2000, has been a supplier and distributor of fire pumps, and services. The Wilmington, DE company stocks fire pump parts such as packings, swing bolt assemblies, gaskets and bearings as well as accessories such as air release valves, brass orifice unions, casing release valves and pressure gauges. The company also offers various services including fire pump repack, control panel trouble shooting & repair, jockey pump controlling, and flow metering systems to sprinkler contractors, fire protection engineers and equipment maintenance professionals.

    • Shanghai Shinjo Pump & Valve Co., Ltd.
      • China Address: 5A Floor, No 789, Wanhangdu Road, Jingan District, Shanghai, China

      Company Overview

      Shanghai Shinjo Pump & Valve Co., Ltd., established in 2010 and headquartered in Shanghai, China, specializes in the manufacturing of industrial valves and pumps such as ball valves, check valves, and gate valves. The company offers an array of products, including magnetic drive pumps, chemical process pumps, electric control valves, pneumatic control valves, pressure-reducing valves, and more. These products are used in diverse sectors, including chemical production, environmental protection, civil construction, and metallurgical engineering.

    • Ningbo Baodi Plastic Valve Co., Ltd.
      • China Address: NO.42 Yongjiang Road,Beilun,Ningbo city, Zhejiang province, China

      Company Overview

      Ningbo Baodi Plastic Valve Co., Ltd., founded in 1994 and headquartered in Beilun, Ningbo, Zhejiang, China, manufactures plastic valves, pipes, and fittings. The company offers a range of products, including plastic ball valves, diaphragm valves, butterfly valves, check valves, and globe valves, along with various plastic pipes and fittings. These products are constructed from materials like FRPP, PVDF, UPVC, CPVC, and PPH. It holds an ISO9001 quality system certification and possesses over 20 valve patents.

    • VIS HYDRAULICS SRL

      Company Overview

      VIS Hydraulics is a manufacturer and supplier of cartridge valve technology products established in 2009 and based in Pavullo Nel Frignano, Modena, Italy. The company offers pressure compensators for regulating the pressure and flow of fluid through hydraulic systems, sequence valves for controlling the sequential operation of multiple actuators, and solenoid connectors for connecting solenoid valves to other system components such as power supplies or transducers. The company’s products are mainly used in the industrial processing, automation, and manufacturing sectors.

    • Castel S.r.l.
      • Italy Address: Via Torri Bianche 7 Vimercate MB, Regione Lombardia, Italy

      Distributor Overview

      Castel S.r.l., established in 1961 and based in Italy, is a supplier of refrigeration and air conditioning components. The company's products include thermostatic and electronic expansion valves, solenoid valves, coils, connectors, and valves for refrigeration systems. It is now present in more than 100 countries on five continents. In 2010, the company opened an associated company in China, “Castel Refrigeration (Shanghai) Co., Ltd." By establishing the "Castel Gulf DMCC," a new subsidiary, the company expands and fortifies its current partnerships throughout the Middle East and Africa.

    • Varimex-Valves Poland Sp. z o.o.
      • Poland Address: ul. Leszno 21 01-199 Warszawa, Poland

      Distributor Overview

      Varimex-Valves Ltd., established in 1992 and headquartered in Masovian Voivodeship, Poland, is a distributor that specializes in supplying industrial valves. The company's product line includes gate, globe, check, ball, and butterfly valves. It also provides specialized valves for aggressive media, safety valves, control valves, and pressure regulators. Its valves are mechanical and chemical resistant, ensuring its durability in various industrial environments. The company has obtained the DIN standards for all of its valves. It serves various industries such as machinery, hydraulics, pneumatics, and more.

    • Paani Precision Products LLP.
      • India Address: Special shed No. 415/2, Near Meldi Mata Temple, Shankar Tekri, udyog nagar, G.I.D.C, Jamnagar, Gujarat, India

      Distributor Overview

      Paani Precisions, a supplier, prioritizes customer satisfaction through efficient services, optimal packaging, and cost-effective rates. Inquiries are encouraged for timely responses and personalized deals. The company is set in its pursuit of excellence in both products and services, known for its responsive customer service. Through ongoing innovation for quality and packaging enhancements, the company ensures timely shipments and reduced delivery issues. With an extensive nationwide network in India, it sources products at competitive rates as scheduled, offering a comprehensive range of solutions at competitive prices.

    • Maximator GmbH

      Distributor Overview

      Maximator GmbH, established in 1885 and headquartered in Nordhausen, Germany, is a supplier of high-pressure technology, testing technology, hydraulics, pneumatics as well as hydrogen technology. The company offers a range of products, from fittings to modular gas compressor systems. It also offers customer-oriented services such as burst pressure, autofrettage of components, and a large number of inspections on CNG. Its pumps are rugged, rebuildable, and can tolerate all installation positions. The company has TÜV certification for its valves, fittings, and tubing, serving diverse industries, including automotive, energy, chemical, and semiconductor industries.

    • AIGNEP SPA

      Distributor Overview

      Alpha Technologies, established in 1976 and based in Bione, Brescia, Italy, is an ISO 9001:2015 certified manufacturer and supplier of fluid power products. The company's product range includes fittings and connectors, automatic couplings, automation equipment, compressed air networks, and fluid valves. These products are vital for operations involving fluids, compressed air, inert gases, and vacuum control. It serves industries such as manufacturing, pneumatics, hydraulics, and industrial automation. In addition to its products, the company offers services like BIM, My Aignep, Aignep Scan, and Infinity Air Planner.

    • AB Industrial Equipment Co.

      Distributor Overview

      AB Industrial Equipment Company (AB Industrial) is headquartered in West Chester, Pennsylvania. AB Industrial distributes and services pumps, seals, and related products. Pump categories include varieties such as centrifugal, vertical, slurry, mag-drive, sanitary, and positive displacement pumps. Seals offerings include component seals, cartridge seals, face materials, elastomers, as well as electric motors. Strainers and valves include basket strainers, auto-cleaning, non-metallic, plug valves, relief valves, and triple duty valves among other offering categories.

    • Modern Fluid Power, Inc.

      Distributor Overview

      Modern Fluid Power Inc (MFP) was established in 1970 on the outskirts of Blanchester, Ohio. Modern Fluid Power is a distributor for specialized industrial equipment. Among MFP’s product lines are actuator parts, actuators, and actuator components, liquid levels, flow sights, thermometers, sight plugs, pressure gauges, & pressure switches, hydraulic cylinders, tube fittings, valves, hydraulic accessories, pipe fittings, pipe line strainers, backflow preventers, water gauges, directional control air valves, filters, regulators, lubricators, air cylinders, and ball, safety, relief, butterfly, solenoid, check, needle, gate, & globe valves.

    • Springer Pumps, LLC

      Distributor Overview

      Springer Pumps, LLC was established in 16 in Eastern Pennsylvania and isa distributor for fluid handling solutions for the food & beverage, CPI, personal care, utility, refining, power generation and industrial wastewater markets in the Northeast and Mid-Atlantic regions of the US. Springer Pumps specializes in pumps, mixers, product recovery systems, and tank cleaning components including diaphragms, metering, mixers, sumps, and accessories. Springer Pumps also offers aftermarket replacement parts, kits, mechanical seals, mixer parts, and heat exchanger parts.

    • AutomationDirect Inc.

      Distributor Overview

      AutomationDirect.com was founded in 1994 to provide solutions for the industrial automation market and has been growing its list of offerings ever since. AutomationDirects’ extensive catalog includes individual components such as cables, various controls, I/O devices, relays, gauges, fittings, and sensors to complete systems. Many parts and devices, especially PLC units are customizable. AutomationDirect.com also provides support via video instructions, online manuals, a learning library, an active community forum to further assist customers.

    • Guenther Supply, Inc.

      Distributor Overview

      Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.

Check Valve Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the check valve page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. KSB SE & Co. KGaA: 15,412
  2. SPX Flow: 4,500
  3. HAWE Hydraulik: 2,750

Newly Established Company

  1. Varimex-Valves Poland Sp. z o.o.: 2014 (10 years ago)
  2. Reasontek Corp.: 2009 (15 years ago)
  3. Oleoweb S.r.l.: 2004 (20 years ago)

Company with a History

  1. MAGDEBURGER INDUSTRIEARMATUR-MANUFAKTUR GMBH: 1838 (186 years ago)
  2. SAPAG VALVES: 1849 (175 years ago)
  3. KSB SE & Co. KGaA: 1871 (153 years ago)

Check Valve Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Check Valve Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
United States of America United States of America 74 46.5%
Germany Germany 18 11.3%
Italy Italy 18 11.3%
China China 8 5.0%
Spain Spain 5 3.1%
United Kingdom United Kingdom 5 3.1%
Japan Japan 5 3.1%
India India 5 3.1%
Taiwan Taiwan 3 1.9%
Poland Poland 3 1.9%
Canada Canada 2 1.3%
Switzerland Switzerland 2 1.3%
France France 2 1.3%
Czech Republic Czech Republic 1 0.6%
Lithuania Lithuania 1 0.6%
Sweden Sweden 1 0.6%
Portugal Portugal 1 0.6%
Turkey Turkey 1 0.6%
Belgium Belgium 1 0.6%
Denmark Denmark 1 0.6%
Netherlands Netherlands 1 0.6%
Austria Austria 1 0.6%

List of Check Valve Products

99 products are listed.

19 Series Pilot type reverse valve-Los Asian Co., Ltd.

Los Asian Co., Ltd.

19 Series Pilot type reverse valve

40+ people viewing

Last viewed: 14 hours ago

■ Product overview ・ Right angle design with easy positioning of pipes and tubes ・ Use screw type banjo or push connection joint ・ Operation by ...


10 models listed

SV27 series external monitoring pilot -type reverse valve-Los Asian Co., Ltd.

Los Asian Co., Ltd.

SV27 series external monitoring pilot -type reverse valve

50+ people viewing

■ Product overview ・ It is resistant to dirt, compensates for wear, achieves quick response and high flow capabilities ・ Popet structure with alm...


10 models listed

Check valve CM (m) series general -purpose type-IBS Co., Ltd.

IBS Co., Ltd.

Check valve CM (m) series general -purpose type

40+ people viewing

Last viewed: 14 hours ago

■ Features ・ The chattering is suppressed by the toning core function (centering), and repeated durability and reliability are improved. ・ O -rin...


6 models listed

27 Series Pilot type reverse valve-Los Asian Co., Ltd.

Los Asian Co., Ltd.

27 Series Pilot type reverse valve

30+ people viewing

Last viewed: 14 hours ago

■ Product overview ・ Popette structure with almost zero leakage ・ When the pressure is removed from the blow -down signal port (BP), the pressure...


10 models listed

AR Check Valve Natural Dropped Check Valve-Asahi Rubber

Asahi Rubber

AR Check Valve Natural Dropped Check Valve

40+ people viewing

Last viewed: 14 hours ago

It is used as a valve (valve) that is built into the circuit of medical devices and a life science -related device/equipment to prevent liquid/gas ...


1 model listed

Balstop / back valve (check valve) that can obtain the maximum flow rate with the minimum pressure loss-Masaie Co., Ltd.

Masaie Co., Ltd.

Balstop / back valve (check valve) that can obtain the maximum flow rate with the minimum pressure loss

30+ people viewing

Last viewed: 13 hours ago

■ Features ・ Bass valve that can obtain the maximum flow rate due to the minimum pressure loss ・ Because of the streamlined design, the pressure ...


1 model listed

Check valve 19 series-Los Asian Co., Ltd.

Los Asian Co., Ltd.

Check valve 19 series

40+ people viewing

Last viewed: 13 hours ago

■ Product overview ・ Automatic cleaning popet design that can withstand dirty air ・ Low cracking pressure ・ Can be maintained online ・ Quiet mo...


10 models listed

Check valve C series general -purpose type-IBS Co., Ltd.

IBS Co., Ltd.

Check valve C series general -purpose type

30+ people viewing

Last viewed: 13 hours ago

■ Features ・ Low price is realized by simple structure. ・ Reduces the load on the seal material by the double touch method with the O -ring and m...


6 models listed

Check valve CF series general -purpose type-IBS Co., Ltd.

IBS Co., Ltd.

Check valve CF series general -purpose type

120+ people viewing

■ Features ・ Low price is realized by simple structure. ・ Reduces the load on the seal material by the double touch method with the O -ring and m...


6 models listed

SV27 Series Pilot type redundant reverse valve-Los Asian Co., Ltd.

Los Asian Co., Ltd.

SV27 Series Pilot type redundant reverse valve

50+ people viewing

■ Product overview ・ It is resistant to dirt, compensates for wear, achieves quick response and high flow capabilities ・ Popet structure with alm...


10 models listed

Check valve CH series high -voltage-IBS Co., Ltd.

IBS Co., Ltd.

Check valve CH series high -voltage

30+ people viewing

Last viewed: 13 hours ago

■ Features ・ High pressure support (SUS316 specifications can be used up to 13MPA). ・ Designed to reduce the load on the seal material by the dou...


3 models listed

Check valve CAM series cracking pressure adjustment type-IBS Co., Ltd.

IBS Co., Ltd.

Check valve CAM series cracking pressure adjustment type

40+ people viewing

Last viewed: 13 hours ago

■ Features ・ Cracking pressure can be voluntarily adjusted. ・ High pressure support. (Maximum use pressure: 20MPa) ・ Ideal for small amounts of ...


2 models listed

Check valve HVC series Large -flow-IBS Co., Ltd.

IBS Co., Ltd.

Check valve HVC series Large -flow

120+ people viewing

Last viewed: 13 hours ago

■ Features ・ Great flow is achieved by adopting a full bore structure. ・ Designed to reduce the load on the seal material. ・ A lineup of abundan...


6 models listed

Made of check valve C5 series fluororesin-IBS Co., Ltd.

IBS Co., Ltd.

Made of check valve C5 series fluororesin

30+ people viewing

Last viewed: 13 hours ago

■ Features -The resin to be widelated is designed with fluorine resin. ・ Adopt a special fluorine resin spring. ・ By selecting various stickers, ...


3 models listed

Check valve CD series fluororesin made by PFA-IBS Co., Ltd.

IBS Co., Ltd.

Check valve CD series fluororesin made by PFA

30+ people viewing

Last viewed: 13 hours ago

■ Features -The resin to be connected is composed of PFA and PTFE. ・ We do not choose a joint specification for the tube. ・ Adopted a special spr...


3 models listed

Made of check valve CP series resin PP-IBS Co., Ltd.

IBS Co., Ltd.

Made of check valve CP series resin PP

50+ people viewing

Last viewed: 13 hours ago

■ Features ・ Small and lightweight and inexpensive for resin. -The main body material adopts PP, so it has excellent corrosion resistance. ・ The ...


1 model listed

SV27 Series Single Valve-Los Asian Co., Ltd.

Los Asian Co., Ltd.

SV27 Series Single Valve

70+ people viewing

■ Product overview ・ Popette structure with almost zero leakage ・ Popet design that realizes quick response and high flow rate, is resistant to d...


10 models listed

Case included/BOX ECL21-NC series ECL21-1KNC-MORIGO SEIKI CO.,LTD

MORIGO SEIKI CO.,LTD

Case included/BOX ECL21-NC series ECL21-1KNC

30+ people viewing

Last viewed: 6 hours ago

Comes in an indoor case.


1 model listed

Related Products

Air Release Valves
Mixing Valves
Manual Valves
Rotary Valves
Back Pressure Valves
Spool Valves
Quick Exhaust Valves
Gas Valves
Propane Pressure Regulators
Plug Valve
Diaphragm Valves
Safety Valves
Pilot Operated Valves
Sanitary Valves
Drain Valves
Valve Floats

Search from All Categories

1201 Sensors
1203 Test Equipment
1204 Motors
1205 Pumps
1206 Relays
1207 Testing Equipment
1208 Analyzers
1209 Diodes
1210 Measuring Equipment
1211 Observation Equipment
1212 Printers
1213 Capacitors
1214 Switches
1215 Robots
1216 Cameras
1217 Connectors
1218 Meters & Instruments
1219 Generators
1220 Light Sources
1221 Power Supplies
1222 FA Equipment
1223 Machining / Machine Tools
1224 Boards & Circuit Boards
1225 Transformers
1226 Integrated Circuits
1227 Cables
1228 Transistors
1229 Controllers
1230 Electromagnetic Countermeasures
1231 Surge Countermeasures
1232 Drive Mechanisms & Components
1233 Scanners
1234 Servers
1235 Magnetic Materials
1236 Amplifiers
1237 Semiconductor Manufacturing
1238 Metallic Materials
1239 Terminals / Interfaces
1240 Temperature Control
1241 Fastening Components
1242 Network-related Equipment
1243 Development & Design
1244 Safety Devices
1245 Input & Display Devices
1246 Polymeric Materials
1247 Optical Components
1248 Purification Equipment
1249 Storage Devices
1250 Fixtures
1251 Heat Sources
1252 Sealing Devices
1253 Storage Products
1255 Fittings
1256 Valves
1257 Gloves
1258 Sanitary
1259 Springs
1260 Conveyors
1261 Resistance / Load
1262 Filters
1264 Converters & Transducers
1267 Cleaning Agents & Equipment
1269 Protective Materials & Equipment
1270 Hoses / Tubes
1271 Clean Room Supplies
1273 Clamps & Fasteners
1274 Adhesives & Repair Materials
1278 Analysis Software
1279 Stages
1280 Freezers
1281 Terminals
1283 Nozzles
1284 Cooling Equipment
1285 Bio
1286 Separation and Extraction Equipment
1287 Lubricator-related Equipment
1288 Business Efficiency Systems / Software
1290 Coils
1291 Paints
1292 Inorganic & Mineral Materials
1293 Dryers
1294 Blowers
1295 Agitators
1296 Weighing Equipment
1298 Packing Materials
1299 Processing Services
1300 Testing Services
1301 Tools
1302 Elements
1303 Chemicals
1304 Pesticides
1305 Building Materials
1306 Agricultural Materials
1307 Painting Services
1308 Vehicle related
1309 Construction Machinery
1310 Ship related
1311 Aircraft
1312 Transport Vehicles
1313 Global Environment

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree