All Categories

History

Laser equivalent axis radiation thermometer-TMHX-TAN0140-2000BM01
Laser equivalent axis radiation thermometer-Japan Sensor

Laser equivalent axis radiation thermometer
Japan Sensor

Japan Sensor's Response Status

Response Rate

100.0%

Response Time

31.9hours

Relatively Fast Response


About This Product

The Japan Sensor's laser -shared axial radiation thermometer can measure the temperature of the processing point without being affected by the laser.

■ The work processing status is real time [visualization]

The Japan Sensor's laser -shared axial radiation thermometer can measure the temperature of the processing point without being affected by the laser. ・ The temperature can be measured at the time of processing with a thermometer with a different wavelength (measured wavelength 1.95 to 2.6 µm) different from the laser. ・ Understanding the temperature of the work / processing status by the optical axis measurement [visualization] ・ Easy to align with the optical axis LED aiming method ・ Compatible with all scenes by order type ・ Equipped with both analog output and RS232C output ・ Surely measurement temperature at the world's highest class response speed ・ Laser equivalent optical unit structure <Product features>

■ Temperature can be measured without being affected by lasers

The unit with a laser -shared axis control control is a thermometer with a wavelength (measured wavelength 1.95-2.6 µm) different from the laser, so the temperature at the time of processing can be measured.

■ Equipped with both analog output and RS232C output

Equipped with both analog output and RS232C output. Analog output 1 point: 4-20ma, 0 ~ 20ma, 0-1v, MV/℃ Switch

■ You can understand the behavior of the work

The temperature of the laser processing point is measured with a radiation thermometer, and the heating conditions can be easily implemented by controlling the laser power. In the same optical axis measurement, you can [visualize] the temperature and processing status of the work. In addition, it is easy to check the processing point with the CCD camera and adjust the position with the LED aim pointer.

■ Surely measure temperature at the world's highest class response speed 0.1ms (0.0001s)

The world's highest class high -speed response 0.1ms (0.0001s) does not overlook the sudden change in temperature.

■ Easy to adjust the optical axis LED aiming method

The "optical axis LED aiming method" adopted by the laser equivalent axis radiation thermometer can be easily aligned because the temperature measurement range is close to the eye. In addition, it is easier to adjust the position even in the red part at high temperature by adopting a green LED. It is possible to aim LED even during temperature measurement.

  • Product

    Laser equivalent axis radiation thermometer

Share this product


320+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Laser equivalent axis radiation thermometer

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Temperature range Effective wavelength Detection element Measured distance Target size Aim response speed Accuracy rating Reproducibility Measurement and decomposition ability Response time (variable with smoothing function) Warm -up time Analog output (non -insulation) Output type (switching) RS232C output (RS232C compliant, non -insulation) Alarm output (non -insulation) Peak hold Radioactivity correction Sensor correction function Used peripheral temperature and humidity Power-supply voltage Cable length (standard)
Laser equivalent axis radiation thermometer-Part Number-TMHX-TAN0140-2000BM01

TMHX-TAN0140-2000BM01

Available upon quote

140-700 ° C

1.95-2.6 μm

INGAAS

2,000mm

φ12mm

Green LED aim

0.0001s

± 4 ℃

± 0.5 % ± 2 ℃ of the measured value

Accuracy guarantee minimum temperature
+ 50 ° C less than 3 ° C or less,
+ 100 ° C less than 1 ° C, below,
+ 100 ° C or higher: 0.5 ° C or less

0.1ms ~ 5s (0 to 95 % analog output)
Variable setting with smoothing function
(When the internal range is switched, 0.1ms may be added)

1min

Temperature output / laser control output switching,
DC4 ~ 20ma, DC0 ~ 20ma, MV/℃, DC0 ~ 1V (Optional 0 ~ 5V/0 to 10V)

Output swing width: about ± 4V, communication speed: 4,800,9,600,19,200,38,400,600,600,200 BPS
Laser ONOFF output (non -insulation) (valid for PC start setting)

Open Drain: DC27V, 0.2A

Reset method (selection)
Time: 0.01-10s variable
Discharge: Time 0.01 to 10s, level 0.2-1.0

Setting range: 0.050 ~ 1.000 (setting decomposition No 0.001),
With reflective correction function

Span: 0.500-2.000,
Zero: -50 ~+50 ° C (° f)

0-50 ° C (Saving peripheral temperature: -15-70 ° C) /30-85% RH (without condensation)

DC4.7-27V, 0.1a Max,
Analog output 0 to 5V; 8-27V / 0-10V; 13-27V

2m

Laser equivalent axis radiation thermometer-Part Number-TMHX-TAN0260-2000BM01

TMHX-TAN0260-2000BM01

Available upon quote

260-3,000 ° C

1.95-2.6 μm

INGAAS

2,000mm

φ12mm

Green LED aim

0.0001s

Less than 800 ° C: ± 4 ℃,
800-1,200 ° C: ± 0.5 % of the measured values,
1,200-2,000 ° C: ± 1.0 % of measured values

± 0.5 % ± 2 ℃ of the measured value

Accuracy guarantee minimum temperature
+ 50 ° C less than 3 ° C or less,
+ 100 ° C less than 2 ° C or less,
+ 100 ° C or higher: 1 ° C or less

0.1ms ~ 5s (0 to 95 % analog output)
Variable setting with smoothing function
(When the internal range is switched, 0.1ms may be added)

1min

Temperature output / laser control output switching,
DC4 ~ 20ma, DC0 ~ 20ma, MV/℃, DC0 ~ 1V (Optional 0 ~ 5V/0 to 10V)

Output swing width: about ± 4V, communication speed: 4,800,9,600,19,200,38,400,600,600,200 BPS
Laser ONOFF output (non -insulation) (valid for PC start setting)

Open Drain: DC27V, 0.2A

Reset method (selection)
Time: 0.01-10s variable
Discharge: Time 0.01 to 10s, level 0.2-1.0

Guarantee range: 0.3 ~ 1.0,
Setting range: 0.050 ~ 1.000 (setting decomposition No 0.001),
With reflective correction function

Span: 0.500-2.000,
Zero: -50 ~+50 ° C (° f)

0-50 ° C (Saving peripheral temperature: -15-70 ° C) /30-85% RH (without condensation)

DC4.7-27V, 0.1a Max,
Analog output 0 to 5V; 8-27V / 0-10V; 13-27V

2m

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Non-Contact Temperature Sensors Products

Other products of Japan Sensor

Reviews shown here are reviews of companies.


View more products of Japan Sensor

About Company Handling This Product

Response Rate

100.0%


Response Time

31.9hrs

Company Overview

Japan Sensor Corporation, founded in 1972, is a Japanese manufacturer based in Minato-ku, Tokyo, specializing ...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree