Heat resistance 180 ℃ Explosion -proof radiation thermometer EXM8 series
Japan Sensor
About This Product
Characteristics of the product
Heat resistance temperature 180 ° C
･ Maximum atmosphere temperature, small sensor head that can be used at 180 ° C!
･ Dangerous gas atmosphere, Zone 0 can be installed in Zone 0 and Zone 1 can be set up in Zone 1
･ Temperature measurement range: -20 ° C to + 1000 ° C
･ Response speed: 240msec
･ Output: 4-20mA
･ Settings: 4-20 mA scaling temperature setting, radioactivity setting, etc. are possible using the optional communication interface.
Can be installed in Zone 0 by explosion -proof
Dangerous place You can install an amplifier unit in Zone 0 and Zone 1
Because of the explosion -proof shape, it can be installed in an atmosphere with combustible materials such as solvent, such as a chemical plant and resin factory.
With the essential safety -proof authentication number of TIIS, ATEX, and IECEX, it can be used in Japan, Europe and other countries around the world that accept IECEX international explosion proof.
Use with the essential safety explosion -proof insulator
This product must be used in combination with the essential safety explosion -proof insulation baria (D5014S/D5014D).
･ Insulated barrier installation and wiring terminal: T35DIN rail (en50022 compliant)
･ Can be attached to power buses and terminal boards
･ Compatible wires: 0.25mm² to 2.5mm², recommended tightening torque: 0.5N / m to 0.6N / m
Free setting is possible for radiation rates and 4-20ma scaling with optional devices
Using the USB interface (LCT mobile unit) or the RS485 interface (LCT-485 unit) of optional devices, radiation ratio, 4-20ma scaling, etc. can be freely set.
Since only the EXTEMP series is authenticated as an essential safety explosion -proof device, the LCT configuration should be used on the safety location circuit. The configuration items are radiation rates, 4-20mA scaling, average, peak and valley values and reflectors.
* In addition to this page, there is a part number.
-
Product
Heat resistance 180 ℃ Explosion -proof radiation thermometer EXM8 series
-
Handling Company
Japan Sensor
12 Models of Heat resistance 180 ℃ Explosion -proof radiation thermometer EXM8 series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | EMC conformity | External dimensions | Maximum connection number | Maximum current | Mounting method | Supply power supply | Temperature measurement range | Used peripheral temperature | baud rate | connection | output | protocol | response speed | setting |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EXM8-21-LT-5 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-LT-10 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-LT-25 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
Exm8-21-MT-5 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
Exm8-21-MT-10 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-MT-25 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
Exm8-21-HT-5 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
Exm8-21-HT-10 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-HT-25 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-XT-5 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-XT-10 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
|
|
EXM8-21-XT-25 |
Available upon quote | Bsen61326-1: 2012 & EN61326-2: 2013 | Approximately 114 (depth) x 18 (width) x 107 (height) | Up to 224 units per Modbus master | 50ma | DIN rail, 35mm | 6 to 28VDC | -20 ℃ ~ + 1000 ℃ | (-) 20 ℃ ~+70 ℃ | 1,200 ~ 57,600bps, automatic inspection | Power and radiation temperature meter 4-20mA, screw terminal | 4 ~ 20ma | MODBUS RTU slave | 240msec | Using the optional communication interface, it is possible to set the temperature range of 4 to 20 mA scaling and set radiation ratings. |
Click on the part number for more information about each product
Other products of Japan Sensor
View more products of Japan Sensor
