2 -colored radiation thermometer general -purpose series METIS M311 / M322
Japan Sensor
About This Product
Two -color radiation thermometer that is less affected by radiation ratio and can accurately measure the temperature even if the visual field is lacking due to dirt of smoke and viewports.
(Made by Germany Sensortherm)
■ Applications
･ Measurement of in the furnace in the furnace over a dirty window
･ Temperature measurement in the steel industry with lots of smoke and water
･ Temperature measurement of fine lines in the extension process
■ Amazing response speed
･ The M3 series is the standard response speed of 1 msec standard
･ The H3 series achieves 80 μSec, the world's highest level as a two -color thermometer.
■ Abundant positioning method and optical system
･ Laser aim
･ Finder type that can be visible
･ Camera type that can be confirmed on the monitor
･ There is also an electric focus specification equipped with a motor
■ What is a two -color thermometer?
This is a radiation thermometer that uses two different measurement wavelengths and converts the ratio of each radiation to temperature.
Therefore, even if the radiant energy in which the radiation energy in which is usually difficult to measure is difficult to measure, the dirty window material, and the environment in which water vapor and dust will fly are reduced, the right temperature can be measured correctly because the radiation ratio is the same.
■ High speed & high accuracy
We have achieved high -speed and high -precision measurements that combine the latest two -color technology and the advantages of digital signal processing.
･ Equipped with two detectors corresponding to two wavelengths. Even if the signal intensity is low, you can surely record the measurement.
･ Digital micro controller signal processing that realizes 100%reproducibility of the displayed measurement value.
-It can also be used to monitor infrared rays and warns for lenses and window contamination.
■ The world's highest response speed with a two -color thermometer
In the M3 series, the fastest 1msec is standard for all models. You can adjust the smoothing up to 10 seconds with a variable type. In the H3 series, the world's highest response speed 80 μSec was achieved as a two -color thermometer. Ideal for temperature measurement and control such as laser welding and heating.
■ Small work can also be measured
The minimum spot size is φ0.8mm by the optimized optimized optimized optimized optimization. Measurement of smaller work is now possible.
■ Operating focus type, movable focus with motor
It can be adjusted continuously within the specified minimum and maximum measurement distance, and can be adjusted to the as much as possible in its focal length.
■ You can select the aiming method
Equipped with a laser aim to make the positioning easier. In addition, there is a founder type for visually seeing the measurement objects, and a camera type for checking on the monitor.
■ Abundant input / output
･ RS232C/RS485 interface (switchable)
PLC and Sensortools software are possible through serial interfaces. If you build software, it will be possible to set the measured values and change the parameters directly.
･ Analog 0 or 4-20mA (2 points output)
It can be connected to an optional temperature indicator or a temperature control.
■ SENSORTOOLS software (standard accessories)
･ Up to four measurement data can be measured and displayed at the same time.
･ 2 color temperature + 1 color temperature can be displayed at the same time.
･ Laser aim ON/OFF and electric focus adjustment, etc.
-
Product
2 -colored radiation thermometer general -purpose series METIS M311 / M322
-
Handling Company
Japan Sensor
2 Models of 2 -colored radiation thermometer general -purpose series METIS M311 / M322
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | 2 Analog output | Ambient temperature | CE Label | Detector | Device parameter | Display (12 -pin device only) | Exposure time | Housing / Protection grade | Input Output | Need for power | ProFibus | ProFinet | Relative temperature | Reproducibility | Response time T90 | Serial communication | Spectrum range | Temperature coefficient | Temperature range | Temperature sublerange | Uncertainty | Visual Organization (selection) | Weight | isolation |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
M311 |
Available upon quote |
0 or 4-20mA, maximum load. 500Ω, resolution 0.0015% (adjusted) temperature (sub) range (16 bits), Output 1: Output the measured temperature, Output 2: Adjustable, 2 colors or 1 color temperature (options of channel 1 or 2), device temperature, control output (for device with PID controller) |
0 to 80 ° C, optical side of optical fiber devices: -20 to 250 ° C, Storage: -20 to 85 ° C |
According to the EU command of electromagnetic immunity | 2 × SILICON | Temperature measurement of two or one color, temperature subrage. Response time, radiation ratio gradient, radiation rate, transparency, spot size filfactor, peak picker, device address, borate, analog output, interface, temperature unit, device menu, focus distance | Dot matrix, green and yellow, 128 × 32 dots (height 5.6mm), for temperature or parameter settings, decomposition performance 0.1 ° C/° f | <0.5ms | With aluminum/IP65, din40 050 connector |
12 Pin Connector: 3 composed connector digital input, output or analog input, 17 Pinkonector: 4 digital input, 2 digital output, analog input 1 point |
23V DC (18-30V DC), Max.6 Va; Reverse polarity protection | 12 Pind Vise Options: IEC61158 Type 3 supports Profibus DP-V0 (and DP-V1) |
12 Pind Vise Options: Supports Profinet-RT and IRT compliant with specifications 2.3. Pre -certified, support class A, B and C functions |
Conditions without condensation | 0.1% (℃+1k at the measurement temperature) | <1ms (dynamic adaptation at a low traffic light, can be adjusted up to 10 seconds | RS232 (4.8-115.2 kbd) or RS485 (4.8-921.6 KBD), switchable, decomposition No |
Channel 1: 0.93-1.1 μm / Channel 2: 0.75-0.93 μm, Channel 1: 0.99 μm / Channel 2: 0.78μm |
Deviation from 23 ° C: 0.04%/k; from 10 ° C to 60 ° C; 0.06%/k K; 0 ° C to 10 ° C and 60 ° C to 80 ° C |
650-1,400 ° C, 650-1,500 ° C, 750 -1,800 ° C, 800-2,100 ° C, 900-2,500 ° C, 1,000-3,000 ° C, 1,100-3,300 ° C, |
Any temperature subrage that can be adjusted in the temperature range (minimum span 50 ° C) |
Full scale temperature ≦ 2,500 ° C: 0.3% (℃+2k at the measured temperature), Full scale temperature> 2,500 ° C: 0.5% (℃ at the measured temperature) |
・ Aim through the lens ・ Laser gating light ・ Color CCD camera |
650g | Voltage supply, analog output, and serial interfaces are electrically insulated. |
|
|
M322 |
Available upon quote |
0 or 4-20mA, maximum load. 500Ω, resolution 0.0015% (adjusted) temperature (sub) range (16 bits), Output 1: Output the measured temperature, Output 2: Adjustable, 2 colors or 1 color temperature (options of channel 1 or 2), device temperature, control output (for device with PID controller) |
0 to 80 ° C, optical side of optical fiber devices: -20 to 250 ° C, Storage: -20 to 85 ° C |
According to the EU command of electromagnetic immunity | 2 × INGAAS | Temperature measurement of two or one color, temperature subrage. Response time, radiation ratio gradient, radiation rate, transparency, spot size filfactor, peak picker, device address, borate, analog output, interface, temperature unit, device menu, focus distance | Dot matrix, green and yellow, 128 × 32 dots (height 5.6mm), for temperature or parameter settings, decomposition performance 0.1 ° C/° f | <0.5ms | With aluminum/IP65, din40 050 connector |
12 Pin Connector: 3 composed connector digital input, output or analog input, 17 Pinkonector: 4 digital input, 2 digital output, analog input 1 point |
23V DC (18-30V DC), Max.6 Va; Reverse polarity protection | 12 Pind Vise Options: IEC61158 Type 3 supports Profibus DP-V0 (and DP-V1) |
12 Pind Vise Options: Supports Profinet-RT and IRT compliant with specifications 2.3. Pre -certified, support class A, B and C functions |
Conditions without condensation | 0.1% (℃+1k at the measurement temperature) | <1ms (dynamic adaptation at a low traffic light, can be adjusted up to 10 seconds | RS232 (4.8-115.2 kbd) or RS485 (4.8-921.6 KBD), switchable, decomposition No |
Channel 1: 1.65-1.8 μm / Channel 2: 1.45-1.65 μm, Channel 1: 1.64 μm / Channel 2: 1.4 μm |
Deviation from 23 ° C: 0.04%/k; from 10 ° C to 60 ° C; 0.06%/k K; 0 ° C to 10 ° C and 60 ° C to 80 ° C |
250-1,000 ° C, 350-1,300 ° C, 400-1,600 ° C, 500 -1,800 ° C, 600-2,300 ° C, 800-3,000 ° C, 1,000-3,300 ° C, |
Any temperature subrage that can be adjusted in the temperature range (minimum span 50 ° C) | 0.5% (℃+2k at the measurement temperature) |
・ Aim through the lens ・ Laser gating light ・ Color CCD camera |
650g | Voltage supply, analog output, and serial interfaces are electrically insulated. |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Japan Sensor
View more products of Japan Sensor
