Essence Safe Explosion-proof radiation temperature meter EXTEMP series temperature range -20 ° C to 1000 ° C
Japan Sensor
About This Product
Product features
･ Because it is essential safety, it can be used in dangerous place Zone0, 1 and 2
Dangerous places can be used in Zone0, 1 and 2 (special dangerous places, class first dangerous and class second dangerous place). Since it is an essential safety -proof, it can be installed in an atmosphere with combustible materials such as solvent, such as a chemical plant and a resin factory. Ideal for plastic production lines, tape production, etc. With the essential safety -proof authentication number of TIIS, ATEX, and IECEX, it can be used in Japan, Europe and other countries around the world that accept IECEX international explosion proof. 2-wire type, 4-20mA output (20 mmax to insulated barrier). Inexpensive measurement cables are also available.
･ Measurement temperature range: -20 ° C to+1000 ° C (can be set within this range)
It is possible to set in a wide measurement temperature range of -20 ° C to+1000 ° C, -20 ° C to+1000 ° C.
Measurement temperature range LT = -20 ° C to 100 ° C MT = 0 to 250 ° C HT = 0 to 500 ° CT = 0-1000 ° C
ST = The custom range temperature range uses the optional USB interface and dedicated software (LCT configuration).
It can be scaled between -20 ° C and 1000 ° C.
･ Use with the essential safety explosion -proof insulator
Use of combination with the essential safety explosion -proof insulation Baliya (D5014S/D5014D)
･ Free setting is possible for radiation ratio and 4-20ma scaling with optional devices
Radiation ratio, 4-20ma scaling, etc. can be freely set using USB interface and dedicated software (LCT configuration) of optional devices.
Since only the EXTEMP series is authenticated as an essential safety explosion -proof device, the LCT configuration should be used on the safety location circuit.
As a condition for setting, an impedance of 4-20ma is required for the 4-20 ma circuit.
The configuration items are radiation rates, 4-20mA scaling, average, peak and valley values and reflectors.
･ 316 Correspondence to harsh environments with stainless steel, protection grade IP65
The temperature measuring housing uses a 316 stainless steel container to respond by solvent and water, so it can respond to harsh environments.
It is equivalent to protection grade IP65.
* IP code A code that represents the grade of waterproof and dustproof performance specified by the Japanese Industrial Standards.
The first symbol of the two -digit numbers following "IP" represents the grade of dustproof performance. The second symbol represents a waterproof grade. 1st symbol → 6 dust -resistant: Dust does not enter the inside of the second symbol → 5 Protection against the convergence: There is no harmful effect even if directly applied to the water flow from all directions
･ CE compatible product
Because it is suitable for CE marking, it is easy to complete the procedure even after retrofitting only a thermometer on existing equipment and equipment for Europe.
* In addition to this page, there is a part number.
-
Product
Essence Safe Explosion-proof radiation temperature meter EXTEMP series temperature range -20 ° C to 1000 ° C
-
Handling Company
Japan Sensor
12 Models of Essence Safe Explosion-proof radiation temperature meter EXTEMP series temperature range -20 ° C to 1000 ° C
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Accuracy rating | Effective wavelength | Power-supply voltage | Radioactivity correction | Response time (variable with smoothing function) | Standard measurement distance | Standard standard size | Temperature range | Used peripheral temperature and humidity |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EX-21-LT-C-5 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-21-LT-C-10 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-21-LT-C-25 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-151-LT-C-5 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-151-LT-C-10 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-151-LT-C-25 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-301-LT-C-5 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-301-LT-C-10 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-301-LT-C-25 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-CF-LT-C-5 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-CF-LT-C-10 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
|
|
EX-CF-LT-C-25 (JS) |
Available upon quote | Either ± 1 ° C or 1%larger repeated accuracy ± 0.5 ° C or 0.5%larger | 8-14μm | 12-24VDC ± 5% | Setting range: 0.20 to 1.0 (Settings for factory shipment: 0.95) | 0.240s | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | Please confirm by "Mass -distance and measurement diameter ratio (D/S ratio)" | -20 ℃ ~+1000 ℃ | 0 ° C to+70 ° C (peripheral temperature used for explosion-proof authentication: -20 ~+70 ° C) Relative humidity: up to 95%(no condensation) |
Click on the part number for more information about each product
Other products of Japan Sensor
View more products of Japan Sensor
