All Categories
This section provides an overview for ball valves as well as their applications and principles. Also, please take a look at the list of 283 ball valve manufacturers and their company rankings. Here are the top-ranked ball valve companies as of December, 2024: 1.DynaQuip Controls, 2.WITT Gas Controls LP, 3.KZValve, Inc..
Table of Contents
Categories Related to Ball Valves
1985-2014: Worked for Alstom Corporation, ABB Corporation, and Gadelius Corporation, designing Jungstrom air preheaters and mechanical design of diamond soot blowers. (ABB Corporation: https://new.abb.com/jp)
2014-2021: Worked as an engineering and project manager at Alvos Inc.
https://www.linkedin.com/in/yoichi-hiroki-92192394/
A ball valve is a valve with a spherical (ball-shaped) valve plug with a hole drilled in the center, which is inserted into a seat in the body (valve box).
By rotating the ball of the valve body 90 degrees, the fluid flow is shut off and the flow path is closed. Ball valve is defined in the Glossary of Terms for valves (JIS B0100) as "a general term for a valve in which a spherical valve plug rotates inside a valve housing with a valve rod as its axis. The valve plug can be a full-surface or half-surface sphere. The valve plug can be either a full-surface ball or a half-surface ball.
The ball of the valve plug does not remain in the flow path when the valve is open, resulting in a small pressure drop, and is used for fully open or fully closed valves, not for flow control.
Figure 1. Example of Ball Valve Use
Ball valves are widely used in household and general industrial applications because of their ease of operation, simple structure, and compact size. Ball valves are generally used in the fully open or fully closed position because fluid accumulates between the body (valve plug) and the ball (plug) when used at the ball's mid-position opening angle. Therefore, this valve is used as a shutoff valve for shutoff purposes.
The ball (plug) of a ball valve can be opened or closed by turning the handle attached to the stem (valve stem) 90 degrees, which has the advantage of easy operation and short operating time. In addition, since the ball does not remain in the flow path during valve opening, pressure loss is reduced.
The flow path has a few steps and can be used for piping fluids containing slurries and solids. The slurry is a mixture of solids and liquids, such as finely ground coal or ore, mixed with water to form mud, which is used for conveying.
Figure 2. Ball Valve Opening and Closing Valve Status and Fluid Flow
In a ball valve, the ball (valve plug) and seat (valve seat) inside the body (valve box) make surface contact to close the fluid. In this condition, the center of the ball bore is at 90 degrees to the center of the body opening. When the ball is rotated 90 degrees, the center of the ball hole becomes concentric with the center of the body opening, and the fluid flows.
The force required for this open/close operation is proportional to the frictional resistance between the ball's spherical surface and the seat. The larger the nominal diameter of the valve, the greater the force required to open and close the valve. Therefore, valves with larger nominal diameters use rotating handles equipped with gear actuators (reduction gears).
Many ball valves are full-bore port valves with a small difference in flow path area between the inside of the body and the inlet/outlet piping, and feature an extremely small pressure loss when fully open because the flow path is almost straight.
Figure 3. Structure of Ball Valve
Ball valves are mainly composed of a body (valve box), a disc (valve plug), a stem (valve stem), and a handle. A ball valve is operated by a handle or an actuator.
The handle is attached to the stem and transmits rotation to the stem. When the valve is open, the rotation of the handle causes the ball to rotate 90 degrees, and when the valve is closed, the ball rotates in the opposite direction.
Figure 4. Operation and Drive System of Ball Valve
Ball valves have the following three main types of operation and drive methods for opening and closing.
Ball valves are available in the following three bore shapes. The bore is the inside diameter of the flow path in the body.
Figure 5. Ball Support Method
Ball valves are available in the following two types of rotating ball support methods.
Floating Type (Floating Ball Type)
In the floating type, the ball is supported by a seat mounted inside the body. The square end of the stem fits into the ball groove and rotates the ball.
The groove of the ball is parallel to the fluid flow direction when fully closed, and the ball slides slightly and is pressed against the seal by the fluid pressure to ensure sealing. Typically used for low pressure (up to JIS20K, CL300) and small bore (up to DN200).
Trunnion Type (Fixed Ball Type)
In the trunnion type, the upper part of the ball is supported by the stem (valve stem) and the lower part by the trunnion (rotating shaft). The upper and lower parts of the ball are supported by the rotating shaft, making it less susceptible to fluid pressure. The seat is pushed by a spring built into the seat holder, which contacts and seals the ball. It is generally used for high pressure (JIS 30K, CL600 or higher) and large bore (DN250 or higher).
Body materials are selected based on the following requirements. For details, refer to each manufacturer's catalog, etc.
In general, ball valve seats are either soft seals made of resin or carbon fiber, or metal seats made of metal.
Soft Seals
PTFE (Teflon) or PTFE filled with carbon or other agents. Maximum service temperatures are approximately 150°C for PTFE alone and 300°C for PTFE filled with carbon or other agents.
PTFE sheets are characterized by chemical resistance, low frictional resistance, and excellent operability. There are also carbon fiber sheets with a maximum operating temperature of approximately 500°C.
Metal Sheet
Carbon steel or stainless steel material is thermal-sprayed with a high-hardness nickel alloy on the ball contact surface of the sheet. In this case, the same thermal spray is also applied to the ball side.
The metal sheet has a maximum operating temperature of up to about 500°C and applies to high-temperature fluids, powders, slurries, and viscous fluids that are difficult to handle with soft sheets.
*Including some distributors, etc.
Sort by Features
Sort by Area
Celeros Flow Technology is based in North Carolina, USA, and is a manufacturer of flow control technology products that was established in 2020 as a spin-off company from the SPX Flow Group. The company markets its products under several brands, including M&J Valve, GD Engineering, and ClydeUnion Pumps. Its product lineup includes filtration systems such as coalescers, valves such as butterfly valve models, and pumps such as reciprocating pump models. The company’s products are used by clients in the oil and gas, power generation, and chemical processing industries.
Becker Pumps Corporation, founded in 1885 in Cuyahoga Falls, OH, is a manufacturer of customer-oriented vacuum solutions for applications such as degassing, injecting, evacuation, gas recirculation, and pneumatic conveying. The company offers industrial vacuum pumps, compressors, pressure pumps, accessories such as replacement vanes, filters, separators, and maintenance and repair kits. The pumps are used in addictive manufacturing, maple sugar extraction, food packaging, food processing, power generation, and medical industries. The company offers factory repair, return authorization requests, pump rentals, training, and mobile services.
DynaQuip Controls, originally founded as Stile-Craft in 1935, is located in Saint Clair, Missouri, is a manufacturer of quality automated valves, actuators, and ball and butterfly valves to industrial, commercial, and residential markets. The products the company supplies include rotary, electric, and pneumatic actuators, quarter-turn valves, along with replacement parts and accessories. DynaQuip Controls also offers custom designed ball and butterfly valves. Many of their clients are in the agriculture and oil and gas processing markets.
Owlstone Inc. is based in Cambridge, England, UK, and is a manufacturer of chemical sensing and detection technology products that was established in 2004 as a part of the Owlstone Group. The company’s product lineup includes its Lonestar brand high field asymmetric waveform ion mobility spectrometry (FAIMS) analyzer for detecting trace chemicals, its Lonestar VOC brand variant suited for volatile organic compounds, and its ultraFAIMS brand miniature chip for integration with compatible spectrometers. The company’s products are mainly used in industrial processing and manufacturing facilities and operations.
Roll Seal Valve Co., Inc., established in 1936, is headquartered in Costa Mesa, California, USA, and is a manufacturer specializing in the production of valves and control systems. The company's product range includes butterfly valves, pressure-reducing valves, and other fluid control solutions engineered for reliability in waterworks, oil and gas, and chemical processing industries. It has received awards like the Fluid Control Pioneer Award in 2015 and Industry Innovation Recognition in 2019. Additionally, the company holds ISO 9001 certification for quality management.
Hydraulics International, Inc. is an ISO 9001 and AS9001 certified manufacturer and supplier of electric, air, hydraulic, and manual-driven high-pressure products to various industries including Automotive, Airline & Aerospace, Defense, and Oil & Gas based in Chatsworth, California. The company offers a wide range of products including Liquid Pumps, Electric & Gas Boosters for filling or topping off re-breather bottles, Air Pressure Amplifiers as well as High-Pressure Components such as Pressure Relief Valves, Inline Check Valves, and Gas Receivers.
WITT Gas Controls LP, a company established in 1945, is based in Witten, Germany, as a manufacturer of gas safety and control equipment. Its specialization is manufacturing gas mixers, mobile analyzers, gas receivers, gas analyzers, and ambient air monitoring. It also manufactures package leak detectors, barcode readers, pressure regulators, pressure regulating stations, and gas filters. The company obtained several ISO certifications, including ISO 9001 and ISO 22000. Its manufactured products are utilized in metalworking, glass processing, biogas, welding, and medical industries across China, Indonesia, Australia, Germany, and Turkey.
Walchem, Iwaki America, Inc., expanded and incorporated in 2013 with headquarters in the USA, is a manufacturer of online analytical instruments and electronic metering pumps used for wastewater systems in swimming pools and spas. The company's tangible product line includes treatment controllers to monitor and regulate various aspects of water treatment processes and water treatment sensors and accessories used to detect chemicals and impurities in water bodies. It also provides cloud-based software tools and instrumentation that integrate with its products. The company offers its know-how to assist clients with customized and full-scope chemical control systems.
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
Danfoss was founded in 1933 in Nordborg, Denmark where it remains today. The company serves automotive, food & beverage, energy & natural resources, wastewater, and mobile hydraulics industries as a manufacturer of power systems and industrial hydraulics. The company operates through three business segments: Danfoss Power Solutions, Danfoss Climate Solutions, and Danfoss Drives. Danfoss Power Solutions produces electronic controls, hydraulic power units, and cylinders. Climate Solutions produces heat exchangers, burner components, hydraulic heating, and sight glasses. Drives produce gear motors, low and medium voltage drives, and various software solutions for operating drives.
Beswick Engineering was founded in 1964 as an engineering consulting firm. Beswick now operates out of Greenland, New Hampshire. Berwick serves the medical devices, aerospace, analytical instruments, bomb, gas, & narcotic detection equipment, semiconductor, dental, hydrogen fuel cell, industrial robot & automation, inkjet, 3D printing, and packaging & food packaging machinery industries. Beswick offers tubing, tubing clamps, cylinders, compression fitting accessories, filters, mufflers, breathers, orifice restrictors such as drilled orifice fittings and sapphire orifice fittings, valves, regulators, and quick disconnects. Beswick also offers custom design options.
Valve Check Inc., established in 2004 and based in Minnesota, US, is a manufacturer and designer of check and pressure relief valves. The company’s products include plastic cartridge valves, microneedle valves, custom manifolds, plastic check valves, and ball valves among others. The check valves come in a wide range of sizes, cracking pressures, and seal options. It serves a wide range of industries such as aerospace, medical, dental, chemical processing, fire protection, and many more.
Flomatic(R) Corporation, founded in Glens Falls, NY, in 1933 is a manufacturer of valves for the water and wastewater industry. The company's product portfolio includes Backflow Preventers, Break Off Plugs, Butterfly Valves, Check Valves and Constant Pressure Pump Control Valves. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also offers services including test and measuring the coating thickness of fusion bonded epoxy coat paint systems to ensure superior abrasion and corrosion resistance for longevity and verification organizations and labs to ensure safety.
DeZurik was founded in 1928 in Minnesota, USA and it is a manufacturer of process industry valves. The company manufactures valves for water treatment, water distribution, pulp and paper, oil and gas downstream, petrochemical products, mining, power, and hydropower dams. Its products include plug valves, butterfly valves, control valves, knife gate valves, actuators, hydraulic power units, and many more. The company's technical resources include software programs and application solutions. The company is ISO 9001-2015 certified.
John Guest U.S.A. Inc., founded in 1985 with headquarters in Fairfield, New Jersey, USA, is a manufacturer of plastic tubing, pipe connections, and plumbing systems. The company's products include low-density polyethylene tubing, flexible cross-linked polyethylene tubing, push-fit tube fittings, UV-stabilized tube fittings, and slip-on collet covers. These products are used for various applications, including home plumbing, underfloor home heating, water purification, ice makers, and car washing systems. The company serves markets that include construction, food processing, food service, recreational vehicles, and marine.
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
CRANE ChemPharma & Energy, a company based in Woodlands, Texas, is a manufacturer of process control instrumentation, valves, and analytical instruments for chemicals and refining products. The company is a part of Crane Co.’s Process Flow Technologies segment. It sells process valves, actuators, sensors, and pumps. Its products are designed to meet the needs of chemicals, industrial, mining, and other industries. It operates under a quality management system certified with ISO 9001.
High Pressure Equipment Company, part of Graco Inc., established in 1954 in the United States, is a manufacturer of high pressure valves, fittings and tubing. The company manufactures high pressure valves, fittings and tubing with superior standards, delivered with the shortest lead times, and priced to ensure its customers' success. Today, it features a broad product portfolio capable of handling pressures up to 150,000 psi and carries an extensive inventory allowing it to offer same day shipping of many items. It also offers a complete line of reactors and pressure vessels and a recently expanded family of pumping systems and generators.
SafeRack, located in Andrews, United States is a manufacturer of loading platform systems, maintenance work platforms, and more. The company produces various platforms for railcar and truck loading, ladders, mobile ladders, gangways and loading ramps, and fluid loading arms. It also makes safety gates and traffic control, aviation and aerospace accesses, marine accesses, spill containment, and loading safety cages. Its railcar and truck loading platforms are designed ergonomically to boost productivity.
Airtec Pneumatics, Inc., founded in 1975 is a manufacturer valves and cylinders based in Germany. The company manufactures valves and cylinders for virtually any application . The products are made with heavy-duty materials to minimize the risk of explosion and to withstand high temperatures and pressure. The company’s products are certified to EU ATEX standards and FM Global and CSA International requirements for use in North America. Moreover, affordable custom solutions are offered to simplify production process.
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
ANVER Vacuum Material Handling Specialists, established in 1975 and located in Elk Grove Village, Illinois, USA, is a manufacturer and supplier of vacuum tube lifting systems and vacuum lifting equipment. The company's product range includes vacuum tube lifters, lifting pads, grippers, generators, and system components, catering to diverse industries such as manufacturing, aerospace, automotive, food and beverage, and material handling. The company’s services entail, testing and certification, supply chain management, and technical support. The company also holds ISO 9001:2015 certification, an indication that it exceeds expectations in quality and service.
International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.
Palmer Wahl Instruments Inc., started in 1836 and based in North Carolina, United States, is a manufacturer of industrial temperature and pressure equipment. The company offers various temperature products, such as utility thermometers, thermowells, temperature sensors, and bimetal thermometers, as well as pressure products, such as pressure gauges, pressure chart recorders, and calibrators. The company holds ISO 9001:2015 certification and adheres to ANSI/NCSL Z-540 and MIL-STD-45662A standards. Its products find application in the electronic, HVAC, manufacturing, medical, and transportation sectors in the USA, Australia, Denmark, Sweden, and Iceland.
RegO, based in North Carolina, USA, has been a manufacturer of valves and regulators since 1908. The company offers diverse products, primarily for gas and liquid control systems. These products are essential for maintaining consistent pressure in gas systems, ensuring safety and security. Its product line includes valves, regulators, fittings and connectors, pressure relief devices, and accessories to complement its product lines, enhancing system performance. The company's products are engineered for precision and durability, which customers rely on. The company has also attained ISO certifications for quality management systems.
Bezares USA, founded in 2000 and headquartered in Oak Ridge, Texas, USA, is a manufacturer of hydraulic components for commercial vehicles. The company specializes in manufacturing a diverse range of hydraulic components and systems, including power take-off (PTO) units, hydraulic pumps, and hydraulic valves. These components are used for the robustness and stability, ensuring consistent and efficient power transmission in various hydraulic applications. The products find extensive use in industries such as construction, agriculture, and commercial vehicles, where dependable hydraulic systems are essential for powering equipment and machinery.
U.S. Valve established in 1999, and based in New Jersey, USA, is a manufacturer and supplier of industrial valves. The product portfolio of the company includes a diverse range of medical gas valves, check valves, custom valves, ball valves, NSF-certified valves, elastomers, and other material valves. The products are used in various industries which involve vacuum pump, blower systems, air compression systems, power generation, water waste treatment, oil, gas, and other industrial applications. The company products are ISO-certified.
Valve Solutions, Inc., established in 1995, based in Alpharetta, Georgia, is a manufacturer of valves and actuators for the Commercial and Industrial markets. The company’s product portfolio includes actuated valves, valves, actuators, and accessories. In 2000, it launched the Series 2000 Resilient Seated Butterfly Valve and Series 1000 Electric Actuator product lines. VSI Waterworks, its sister company manufactures AWWA valves for the Municipal markets. The company has partnerships and OEM agreements with other HVAC valve and actuator suppliers such as Belimo, Siemens, Johnson Controls and Honeywell.
Warren Valve, established in 2000, is headquartered in New Jersey, USA, and operates as a manufacturer and supplier specializing in industrial valves. Their primary attention includes producing a range of valves such as gate, globe, check, and ball valves, catering to various industries like oil and gas, petrochemicals, and power generation. Warren Valve's dependable and durable valves play a vital role in regulating fluid flow and ensuring operational safety in critical systems. With a pledge to quality and performance, Warren Valve subsidizes significantly to fluid control and management solutions.
Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.
NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.
MAXPRO Technologies was founded in 195 and is founded in Fairview, Pennsylvania. MAXPRO is a distributor for pumping products including air driven liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings, and tubing. Other products include high-pressure fittings such as adapters, bulkheads, couplings, crosses, elbows, nipples, and tees. Rental equipment and complete systems such as air amplifier systems, liquid pumping systems, gas booster systems, oxygen gas booster packages, portable test carts, high pressure test systems and custom systems are also available.
Victaulic Co. of America, established in 1919, and headquartered in Easton, Pennsylvania, USA is a global manufacturer of of mechanical pipe joining solutions. The company offers a broad array of products catering to various industries, and some examples include rigid couplings, fittings, grooved installation-ready fittings, rigid couplings for stainless steel (StrengThin 100 Style E497), and cast carbon steel flexible couplings. These solutions effectively address complex piping challenges encountered by engineers, site owners, contractors, and distributors.
Swiss Jewel Company, founded in 1920 and headquartered in Bala Cynwyd, Pennsylvania, United States, is a manufacturer and supplier of precision synthetic sapphire, ruby, and glass components. The company's product line includes sapphire windows used for cryogenic view ports, jewel bearings used in precision instruments, and sapphire tubes used in the manufacture of light guides. It also works with other materials, including ceramics, silicon nitride, and fused silica, and welcomes clients to discuss custom optical component or mechanical component design and production.
Hilliard Corporation was founded in 1905 and headquartered in Elmira, New York. The company is an engineer, manufacturer, and distributor of motion control, braking systems, and filtration products to industries such as power generation, oil & gas, refinery, and steel in their ISO 9001:2015 certified manufacturing facilities. The company provides direct contact between customers and engineers and has the manufacturing and design capabilities to customize orders to meet any challenge in the motion control and filtration industries, whether the end products are industrial clutches, engine starters, or braking systems.
Clark Solutions, established in 1962 and headquartered in Massachusetts, United States, is a supplier and distributor of fluid handling products. The company offers a wide range of products, including pumps, valves, and instruments, among others, serving industries such as chemical processing, pharmaceuticals, and food and beverage. These industries rely on the company's solutions for precise fluid control in tasks like transferring, mixing, and flow control, ensuring the accuracy and efficiency of operations.
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
Precision High Pressure, established in 2015 and based in Nampa, Idaho, USA, is a manufacturer and supplier of accessory capables. The company's product range includes adapters and couplings, adjustable relief valves, air-operated needle valves, ball valves, and block and bleed valves. These products find applications in areas such as subsea and surface operations, hydrogen fuel cells, chemical injection systems, and process control systems. Serving industries like oil and gas, waterjet markets, hydrogen, and waterjet cutting, the company offers services such as high pressure valve solutions, custom fitting provisions, and tubing techniques.
MKS Instruments, founded in 1961 and based in Massachusetts, USA, is a manufacturer and distributor of instruments and process control solutions for advanced manufacturing processes. Its solutions are critical to addressing the challenges of miniaturization and complexity in advanced device manufacturing by enabling increased power, feature enhancement, and optimized connectivity. Its offerings include compact pressure transducers, mass flow meters, and microwave generators, used in advanced manufacturing and metrology applications. The company is certified to ISO 9001:2015, and has received an Innovators Award for its ESI CapStone system.
Distribuidora Internacional Carmen, S.A.U., based in Zaragoza, Spain, has been a manufacturer and distributor of stainless steel fittings, hydraulic, and pneumatic components since its establishment in 1983. The company primarily produces various stainless steel fittings such as couplings, flanges, and adapters. It also offers hydraulic components such as hoses and swage ferrules, along with custom manufacturing services for client projects. The company’s products are commonly used in construction, agriculture, and mining operations.
The Specialty Mfg. Co., founded in 1902, is a manufacturer and distributor of valves, hydraulic couplers, pool/spa science automation, dental components, and custom machine tool fixtures from brass, plastic, and stainless materials. The products are strainers & filters, pressure controls, and valves such as check, ball, dental, cartridge, and custom valves for chemical dispensing, food & beverage, agriculture, transportation, and power generation industries. The company in St. Paul, MN, offers integrated services such as precision machining, metal stamping, grinding, plastic injection molding, and wire EDM. The company has an ABS Quality EValuation conformance certification.
Sandpiper Pump, founded in 1965, is an American manufacturer headquartered in Mansfield, Ohio, producing air-operated double diaphragm (AODD) pumps. The company's product lineup includes pumps and associated parts and accessories, such as high-pressure, sanitary, and submersible variants. It also manufactures a range of flap and ball valves, including standard, containment, and heavy-duty models. In addition, the company produces complementary products for enhanced pump functionality, such as leak detection tools, electronic speed controllers, and surge dampeners. The company serves customers in over 75 countries across diverse industries, including aerospace, ceramics, and mining.
Valworx is a leading supplier of actuated valves and accessories. Valworx can provide you with Stainless, brass, PVC, sanitary ball and butterfly valves. Electric, pneumatic and manual actuation.
Metalúrgica Zaes S.L., founded in 1962, is an industrial valve and fitting manufacturer based in Cornella de Llobregat (Barcelona), Spain. Certified with ISO 9001:2015, the company offers a range of industrial valves, including float, needle, and safety valves. It also provides accessories for industrial instrumentation, such as pressure gauge dampers and valves, along with siphon tubes, designed for control, dissipation, and measurement in gaseous, liquid, and vapor systems. The company's fitting offerings include hose, push-in, and threaded fittings. These products find applications in various sectors, including gases and cryogenics, street cleaning, and water and waste management.
Ridart SRL, founded in 2007 and headquartered in Gazzada Schianno, Varese, Italy, is a manufacturer of safety valves and fluid couplings. The company's product line provides solutions for safer and cleaner hydrocarbon and chemical fluid transfers and storage tank management, including overfill prevention valves, quick-dry accessories to prevent leaking during fluid transfer, and PTFE caps for mobile tank systems. It also offers custom design, engineering, and production for OEM, ODM, and private label clients.
JORC INDUSTRIAL LLC, founded in 1991 and located in Heerlen, the Netherlands, is a manufacturer of compressed air condensate management products. Its broad range of products includes timer drains, oil and water separators, air-saving products, timers, and level-sensing drains. These products are used for automated condensate removal, ensuring air purity, optimizing compressed air usage, controlling system operations, and maintaining proper air quality. These products have applications in industries such as automotive, manufacturing, and construction.
Power-Genex Ltd., established in 1997 and headquartered in Incheon, South Korea, is a manufacturer of valve automation products and accessories. The company's products include electro-pneumatic valve positioners, smart valve positioners, and solenoid valves. Its valve accessories include limit switch boxes, position transmitters, and air volume boosters. Its products cater to industries requiring precise and consistent valve automation solutions. In 2022, the company was honored with the Tower of Export by the Korea International Trade Association, recognizing its excellence in international trade.
Isiflo is based in Raufoss, Norway, and is a manufacturer of brass and composite couplings established in 1967 before being acquired by the Dutch company Aalberts in 2007. The company’s product lineup includes various brass and composite couplings for utility pipes, gate valves, and tapping tool sets. It also offers various fittings and tapping saddles, along with product customization services for clients with unique project parameters. The company’s products are used primarily by customers in the water distribution and supply, gas distribution, and sewage treatment sectors.
Yantai Jereh Petroleum Equipment & Technologies Co. Ltd. is a Chinese manufacturer of oil field equipment that was established in Yantai, Shandong in 2004 as a subsidiary of Jereh Group. The company produces a wide range of well completion, drilling, and stimulation equipment. These include off-shore as well as land rigs, and flowline products such as choke or kill manifolds and nitrogen generators. It also offers cementing trucks and pumps for mobile operations and demanding environments. The company maintains locations in over 50 countries including in the North America, Russia, and Africa.
Elettromeccanica Delta S.p.A. is an Italian ISO 9001 certified manufacturer of safety and control products for combustion equipment founded in 1961 and based in Arcade, Treviso. The company's product portfolio includes burner control units for gas firing appliances, proportional flow control valves, solenoid actuators for control valves, air-to-gas ratio controllers, and gear pumps for oil burners. It also offers design and engineering services for customers with unique project parameters. The company's products are primarily used by client boiler and furnace installation companies, HVAC manufacturers, power generation facilities, and waste incineration plants.
Rastelli Raccordi is a UNI EN ISO 14001:2015-certified manufacturer of hydraulic fittings for the industrial sector established in 1952 and based in Villanterio, Pavia, Italy. The company primarily produces hydraulic tube fittings such as flareless cutting ring fittings for fluid transfer applications, as well as adaptors for various connector types and standards. It also offers onsite custom tube forming services using its RR-Form systems, and product treatment services using its Zi-Ni Total Screen systems. The company chiefly serves clients in Europe’s maritime, environmental protection, and chemical industries.
Danfoss, established in 1933 and headquartered in Nordborg, Denmark, is a manufacturer specializing in Climate Solutions, Drives, and Power Solutions. The company's solutions find applications in various sectors such as refrigeration, heating, and both off- and on-highway equipment. It also offers solutions for renewable energy sources like solar and wind power, alongside district-energy infrastructure for urban areas. Its digital displacement pump received both the Powertrain Product of the Year and Achievement of the Year in the 2022 Diesel Progress Summit Awards.
STAUFF is based in Werdohl, Germany, and is a manufacturer of fluid and hydraulic power components that was established in 1958 as a part of the Walter Stauffenberg Group. The company primarily produces tubes, pipes, and hose clamps for vibration-resistant installations in various industrial environments. It also offers tube fittings for creating leak-free connections in hydraulic systems, hose connectors for connecting hydraulic hoses to systems or components, and quick release couplings. The company’s products are commonly used in plant engineering, power generation, and wastewater processing operations.
KEIHIN CO., LTD, founded in Japan, in 1953 is a manufacturer of industrial valves. The company's product portfolio includes ball valves, ate valves used for isolating and regulating the flow of liquids, gases, and slurry, Check Valves, Pressure Relief Valves, and diaphragm valves used for sterile and aseptic applications in the pharmaceutical and food industries.Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense.
Costruzioni Meccaniche F.lli Sacchi S.n.c., founded in 1926, is an Italian manufacturer headquartered in Vidigulfo, Lombardia, offering solutions to handle powdered and granular bulk products. The company’s portfolio includes SmartPick, a robotic system with five patents, designed to handle bags by picking, opening, and emptying them. SmartTipping is another robotic solution for micro-ingredient recipe preparation. It also develops SmartPack, featuring compact robotic palletizing and bagging systems, whereas SmartPicker facilitates the picking of product orders in bags. The company serves various industries such as agrochemical, energy, and mineral, supported by a laboratory area for prototype checking before production.
Zhejiang Gute Pneumatic Machinery Co., Ltd., founded in 1997 and based in Zhejiang province, China, is a manufacturer of pneumatic conveying system valves. The company also produces other products such as power station high-temperature and high-pressure valves, water treatment valves, ash conveying equipment, power plant desulfurization, and other environmental control equipment. Working with Zhejiang University, the company has developed anti-wear and toughened structural ceramic valves made using nanotechnology. All the products produced by the company are used in petroleum, electricity, metallurgy, and chemical engineering.
Shaanxi Aerospace Power High Technology Co. Ltd. is based in Xi’an City, China, and is a manufacturer of aerospace power equipment established in 1999 as a subsidiary of China Aerospace Science and Technology Corporation (CASC). The company produces various gas and flow meters, torque converters, and specialized tanks. These include crystallizers, industrial vehicle torque converters, and hydraulic turbines. It also offers reactor vessels and filter presses, which are mainly used in the oil and gas, energy generation, and military sectors.
HEROSE GMBH is a manufacturer of specialty valves established in 1873 and based in Bad Oldesloe, Germany. The company produces various valves for industrial gasses and fluids, such as cryogenic liquefied industrial or natural gasses. These include pressure regulators, cryogenic safety valves, and free discharge safety valves. Aside from its products, the company also offers custom valve engineering services using VALVIO design and analysis software for its clients with unique project specifications.
Hunan Along New Energy Technologies Co., Ltd is located in Changsha City, Hunan province, China, and was founded in 2008 is a manufacturer specializing in the resource utilization of organic waste and biogas conversion for electricity generation. The company offers a range of products and services, including anaerobic fermentation systems, biogas pre-treatment systems, biogas-CNG conversion systems, biogas storage systems, and membrane separation technology for recycling bio-liquid. These products and services find applications in purification plants, the animal feed industry, food production and processing industry, and animal husbandry.
ShenZhou Engineering Plastics Co. Ltd is a manufacturer of fluoroplastics-fabricated products for the industrial sector that was established in 1987 in Shenzhou, Hebei, China as Shenzhou Engineering Plastic Factory before merging with Yuanzheng Group in 2016. The company primarily offers polytetrafluoroethylene (PTFE) coated fabrics, PTFE lined pipes, and mechanical components such as gaskets and rods. These can also be fabricated from other fluoroplastics, including ethylene tetrafluoroethylene (ETFE), polyvinylidene fluoride (PVDF) and fluorinated ethylene propylene (FEP). The company’s products are used mainly by clients in the industrial manufacturing and processing sectors.
Winan Industrial Limited is a Chinese manufacturer of firefighting equipment established in 1995 and based in Shenzhen city, Guangdong. The company's products include automated fire monitors, foam bladder tanks, hoses, specialized valves, and foam inductors. It also offers complete fire suits and consumables, such as foam concentrate, automatic fire extinguisher balls, and conventional fire extinguishers. The company's products are chiefly used in Chinese petrochemical facilities, airports, marine ports, and power distribution locations.
Scientific and Production Enterprise Sibtechnocenter, established in 2003 and headquartered in Tyumen, Russia, is a manufacturer and developer of blowout preventive oil and gas equipment. The company's products include hydraulic blowout preventers, manual BOPs, and coiled tubing equipment. It also offers preventive products with nominal bores of 156, 160, and 180 mm and working pressures of 21 and 35 MPa. Its design department specializes in import-substituting equipment, including valves, sealing complexes, and manifolds. The company produces serial and experimental high-precision metalworking products with CNC lathes, grinding, and sharpening machines. Its testing services include ultrasonic flaw detection, axial load, and low-temperature tests.
TPS-Technitube Röhrenwerke GmbH, established in 1973 and headquartered in Daun, Germany, is a manufacturer and stockist that specializes in steel and tube products. The company offers a wide range of products, including seamless tubes, flanges, fittings, valves, and heat exchanger tube stock. It also provides oilfield tubing such as tubing, casing, and drill pipe. Its products offer surface finish quality with no weld seam, ensuring high-pressure resistance and a smooth flow of fluids. The company has achieved ISO 9001:2015 and IATF 16949:2016 certification. It serves industries such as oil and gas, chemical, automotive, semiconductor, and more.
Pietro Fiorentini S.p.a. founded in Arcugnano, Vicenza, Italy, in 1940, is a manufacturer of oil/gas processing and flow management products. The company manufactures products including pressure regulators, gas meters, gas odorizing systems, and valves. In 2022 it reached consolidated revenues of 500 million euros, an increase of 8% compared to 2021. The company has 2,800 employees spread across 40 international locations, with a strategic commercial presence in 100 countries worldwide. It also provides spare parts for its products and services of data management and custom engineering.
SAF S.r.l. is a manufacturer of silencers, filters, and fittings for industrial automation that was established in Rotkreuz, Switzerland, in 1978. The company offers rotary actuators in stainless steel or aluminum materials, metal silencers or mufflers for pneumatic systems, and sintered filters. It also offers fittings and related accessories fabricated from plastic, stainless steel, brass. The company’s products are used mainly by clients in the automotive and semiconductor industries, and in the industrial manufacturing sector.
Ramén Valves AB, established in 1945 and based in Sweden, is a manufacturer of Ramen ball sector valves and industrial valves with production facilities in Stockholm and Fagersta. The company manufactures badge meters, pressure regulators, and control valves, supplying various industries such as chemicals, fertilizers, mining, minerals, and industrial gas. The company's valves, which feature circular to elliptical openings, are designed to mitigate dewatering and clogging issues. In 1978, the company expanded its product portfolio by incorporating industrial control valves and regulators sourced from various brands.
HEINZ MARCHEL GMBH & CO. KG founded in Wallenhorst, Germany, in 1973, is a manufacturer of gas fittings and empty hook conveyor systems. The company manufactures gas filters, meat hooks, valves, flow meters, and cleaning machines for slaughtering hooks. Its thread flow meters are used to measure the flow rate of gases that pass through a pipe or tubing with threaded connections. The company is ISO 9001: 2015 certified. It also provides services in mechanical engineering and offers spare parts for its products.
Elite Line Industrial, also known as Z-Tide Valve, is a manufacturer of pressure control valves, established in 1978 and located in Kaohsiung City, Taiwan. Its product line encompasses pressure reducing valves (PRV), pressure relief valves, pressure sustaining valves, water hammer arresters, among others. The company also offers exclusive design and smart functionality for easy installation, using advanced CNC precision equipment. The company holds quality certifications such as ISO9001, CE0035, UL, ACS, and ATEX approvals. Serving industries including semiconductors, water works, fire protection, and building sectors.
HD Fire Protect Pvt. Ltd, established in 1983 and headquartered in Maharashtra, India, is a manufacturer of firefighting equipment and systems that specializes in water and foam-based products. The company offers a wide range of products, including monitors, foam systems, firefighting skids, and more. It also offers tank protection systems, including foam chambers, rim seal foam pourers, and other related components. Its foam systems are designed to suppress and extinguish flammable liquid fires. The company has achieved the CRISIL MSE*1 rating by CRISIL. It serves industries such as machinery manufacturing, building materials, and fire protection.
Ningbo Yinzhou Plumbing Hardware Co, formed in 2000 and located in Ningbo, United States, is a manufacturer of brass and bronze valves, fittings, and water meters. The company manufactures brass valves, fire hydrants and adaptors, bronze valves, and water meters and parts. It also fabricates brass pipe couplings, bronze couplings, and manifold and radiator parts. It is specifically involved in hydraulic, pneumatic, and industrial ranges. It exports 10 containers each month under the ISO 9001 quality system, consisting of 400 kinds of products.
Shanghai EVP Vacuum Technology Co. Ltd., is a manufacturer and supplier of vacuum solutions, headquartered in Shanghai, China. Its product offerings include liquid ring vacuum pumps, vacuum valves, and oil diffusion vacuum pumps. These products have diverse applications in industries such as coal mining, papermaking, sugar production, pharmaceuticals, and the chemical industry. Its manufacturing facility is well-equipped with CNC machining centers and testing and analysis equipment. All its products adhere to the DIN and ISO 9000:2008 standards and are CE certified. The company has supplied vacuum solutions to customers in over 80 countries and regions worldwide.
Gemels spa is an Italian manufacturer of hydraulic ball valves and related products that was established in 1969 in Trescore Balneario, Bergamo. The company primarily produces hydraulic ball valves for controlling fluids in hydraulic systems, electric motors for powering pumps or conveyors, and quick couplings for connecting or disconnecting hoses or pipes. It also offers technical support and after-sales services including repair and replacement. The company’s products are mainly used by clients in the marine, chemical processing, and oil and gas industries.
HOMA Pumpenfabrik GmbH, founded in 1946, is a pump manufacturer headquartered in Neunkirchen-Seelscheid, Germany. Specializing in self-priming, stainless steel, and submersible pumps, the company provides solutions for chemically aggressive liquids, clear and drainage water, and sewage. Additional offerings include lifting units with impact-resistant underfloor plastic collecting tanks, pump control and automation systems, as well as flood emergency kits. The company serves diverse applications, such as community and industrial water disposal, construction site dewatering, and surface water removal, with the support of over 60 subsidiaries and marketing agencies worldwide.
THERMOMESS S.R.L. is a manufacturer of industrial- as well as cryogenic use ball and globe valves established in 1994 and based in Robecchetto Con Induno, Milan. The company's product lineup includes wafer-type ball valves with a steam jacket, cryogenic ball or globe valves with extended bonnets, and split body ball valves. It also produces various thermostats for room, pipe, or boiler temperature control and monitoring operations. The company's products are used primarily by its clients in the oil and gas, power generation, and chemical industries.
Wenzhou Solid Mechanical Equipment Co., Ltd., established in 1989 and headquartered in Wenzhou, China, is a manufacturer of hydraulic pumps, oil pumps, and valves. The company offers a range of products, including high and medium-pressure vane pumps, gear pumps, piston pumps, lubricating oil pumps, and more. It also offers centrifugal pumps, diaphragm pumps, butterfly valves, and globe valves. Its lubricating oil pumps allow the pump to start operating without the need for additional oil when the machine is opened. Additionally, it has achieved ISO 90001 certification. The company exports its products to North America, South America, and Western Europe.
ABSOLUTE OZONE, founded in 1995 in Edmonton, Alberta, is a manufacturer of commercial and residential ozone generators, ozone sensors, monitors, tubes, and fittings. The company's ozone generators are ideal for applications such as drinking water treatment, food disinfection, air purification, soil remediation, and pharmaceutical processes. Its products also include ozone analyzers, ozone spray containers, flow meters, venturi injectors, and air compressors. Industries served include automotive, food, bottling water, agriculture, textile, laundry, and many more. The company is CE certified and RoHS compliant.
Beijing Valve General Factory Co., Ltd., established in 1952 and headquartered in Beijing, China, is a manufacturer that produces various types of valves. The company's product line includes ball valve, gate valve, globe valve, check valve, and butterfly valve. It also offers a cryogenic valve, a forged steel valve, a water system valve, and an actuated valve. Its product has a fire-safe and anti-static design. The company has achieved ISO9001, API6D, API6A, and API607 certification. It serves various industries, including petroleum, chemical, metallurgy, electricity, and infrastructure construction.
Ekin Industrial | MIT Industrial Products, founded in 2005 and headquartered in Umraniye, Istanbul, is a manufacturer specializing in plate heat exchangers. The company offers a range of products, including heat transfer equipment, magnetic coupled acid pumps, and fluid transfer products. Additionally, it provides services such as heat exchanger servicing and maintenance training, product repairs, and installations. These products find applications in renewable energy plants, nuclear energy fields, and electricity distribution systems.
DI NICOLA, established in 1928 and based in San Giovanni Teatino, Abruzzo, Italy, is a manufacturer of valves and electromechanical equipment. The company produces other products related to drinking water treatment plants, irrigation, wastewater treatment plants, dams, hydroelectric plants, and industrial installations. Some of the produced by DI NICOLA include flange adapters, disassembly joints, steel clapet valves, and vent valves. The company is supplying the products for industrial and hydraulic use. Every product produced meets the quality standards.
Handa Valve Co., Ltd. is a Chinese ISO 9001 certified manufacturer of valves and control equipment established in 2009 and headquartered in Changde, Hunan Province. The company produces a wide range of valves for fluid control or monitoring purposes, such as butterfly, floating ball, or knife gate valves. It also offers battery-operated, pneumatic, and manual models. Aside from its products, the company provides customized solutions for its clients in the power generation, petrochemical, metallurgy, and green energy sectors.
Super Air Neng Yang Industrial Co. Ltd., established in 1988 and headquartered in Taiwan, is a manufacturer of compressed air systems and associated equipment. The company's products include motorized zero-air loss condensate drains, KTEC screw compressors, and super air dryers. It also provides peripheral equipment for air compressors, such as dryers, gas storage barrels, and flow meters. Its motorized ball valve zero air loss condensate drains prevent air loss by automatically draining condensate without oxygen consumption. The company offers energy-saving evaluation, planning, and construction for air compressors, along with maintenance, training, and repair services.
Sesto Valves Srl, based in Agrate Brianza, Italy, is a manufacturer of custom designed ball valve solutions for the chemical, petrochemical and energy industries. The company has a product range for premium and midrange ball valves for applications in cryogenics, extreme high temperatures, metal seated applications, as well as specialty double block and bleed emergency shutdown valve solutions. These valve products can be supplied as simple manual shutoff valves or with customized automation and control solutions for applications with unique requirements. The company has obtained conformity certifications for CE and ISO 5211 standard, and also has a CRN certificate and ABS approval.
Xiamen Landee Industries Co. Ltd., established in 1994, is an industrial components manufacturer based in Xiamen, China. It releases a new flow control model on a monthly basis and produces over 50 types of compononts, including pipes, valves, flanges, pipe fittings, and gaskets, in over 20 materials and 400 sizes. The company's products are used in the oil rig, gas, chemical, pharmacuetical, and paper-making industries, and it complies with API, CE, and ISO 9001:2008 certification requirements.
WISY AG, founded in 1989 and headquartered in Germany, is a manufacturer specializing in rainwater harvesting systems. The company provides a wide range of rainwater management products, including filters, tanks, pumps, and control systems such as hoses and accessories, cistern overflows, suction filters and many more. It serves various industries, with a primary aim on construction, urban planning, and sustainable environmental projects. Its rainwater harvesting solutions are designed to capture, store, and efficiently utilize rainwater for purposes such as irrigation, toilet flushing, and fire protection.
ZETKAMA, established in 1946, is a manufacturer of Industrial Valves and Iron Castings based in Scinawkda Srednia, Poland. The company offers various types of valves including Stop Valves, Butterfly Valves, Strainers as well as Ball Valves, and Rubber Expansion Joints. ZETKAMA specializes in the production of Grey Cast Iron Castings and various types of Nodular Cast Irons. The company also has its own Iron Foundry and is able to adapt patterns, both in 2D and 3D, to customer specifications.
Bardiani Valvole SPA, established in 1981 and headquartered in Fornovo Taro, Italy, is a manufacturer that designs, manufactures, and sells hygienic valves. The company offers a wide range of products, including single-seat valves, double-seat valves, modulating valves, butterfly valves, and ball valves. It also offers control units, valve units, and high-pressure valves. Its high-pressure valves are designed to handle applications that require pressure resistance. The company is certified by the ISO 9001 system, EHEDG, 3A, and PMO. It serves industries such as milk and dairy, FnB processing, and pharmaceutical.
Erreesse SRL, established in 2004 and headquartered in Grignasco, Piemonte, Italy, is a manufacturer of industrial valves. The company's main products include trunnion ball valves, floating ball valves, and special-application rugged valves. Its industrial valves have applications in high temperatures, low temperatures, and under water, and these products are used in hydrocarbon processes, utility processes, and the processing of toxic substances. The company has completed projects that include supply to Egypt's Zohr Onshore Development and Das Island's LGP Plant.
Formatura Iniezione Polimeri S.p.A. is based in Casella, Genoa, and is an Italian manufacturer of thermoplastic valves and fittings founded in 1954 before being acquired by the holding company Aliaxis. The company produces a wide range of solvent threaded piping systems, variable area flowmeters, and conductivity measurement devices. It also offers plastic manual or actuated valves, as well as compression fittings. The company's products are primarily used by chemical processing plants, water or wastewater treatment facilities, and power distribution corporations, with additional applications in the HVAC, fire prevention, and food production sectors.
Era Co. Ltd., established in 1983 and headquartered in Zhejiang, China, is a plastic pipe and piping system manufacturer, developer, and supplier. The company provides solutions for drainage, electrical conduits, and feedwater systems. The core products include PVC pressure pipes, CPVC fittings, and PVC insulating electrical pipes. These products find ideal use in various residential, commercial, and industrial water-piping systems and electrical systems. The company works with original equipment manufacturers and also provides private label toll manufacturing services. Its notable clients include The Home Depot, Hardware House, and Lowe's.
Siemens began in 1847 and is headquartered in Munich, Germany. Siemens focuses in automation and digitalization technology and operates globally. Siemens’s 5 operating segments are digital industries, smart infrastructure, mobility, Siemens Healthineers, and Siemens Financial Services. Siemens Financial Services provides debt and equity investment as well as financing solutions. Siemens Healthineers is a medical devices company that provides products and consulting. Mobility includes passenger and freight transportation. Smart infrastructure includes full solutions for electrification. Digital industries offer both software and hardware for industries and production efficiency.
Sapag Valves, founded in 1849 and headquartered in Ham, France, is a manufacturer of customizable industrial valves, including butterfly and ball valves ranging from DN8 to DN3000. The company is ISO 9001, ISO 14001, and ISO 45001 certified and operates in more than 70 countries worldwide. It started producing valves in 1929, and it is in the valves division of the French-Swiss IPI Group. The company stocks valves under different brand names, including Gachat, Monovar, and Clasar, and also provides various services for all types of valves, including repair, supply of original spare parts, and curative maintenance.
Tork, established in 1985 and located in Istanbul, Turkey, is a manufacturer of industrial control valves and process automation systems. The company's products include fluid control systems such as solenoid valves, pneumatic actuators, pneumatic piston valves, pulse valves, and electric actuators. It also offers services related to fluid control systems and process automation solutions. Its product has a high flow rate, short open-close time, and less pressure drop. The company has been certified with the ISO 9001:2015 Quality Management System. It serves various industrial sectors such as food, iron, steel, chemical, petrochemical, and more.
Taizhou Tonhe Flow Control Equipment Co. Ltd., founded in 2009 and headquartered in Taizhou City, China, is a fluid control parts and components designer and manufacturer. The company's products include miniature electric ball valves, electric actuators, and water-proof control equipment. These products are used in fluid control systems, such as automatic water pump tanks, air conditioning equipment, and agricultural irrigation equipment. It also offers original equipment manufacturing and private label production services.
Bucher Hydraulics GmbH, founded in 1923 in Germany, is a global manufacturer of hydraulic drive and control technologies for mobile and industrial hydraulic applications. The company's products include hydraulic cylinders, pumps, manifolds, lift tables, and workbenches. Bucher Hydraulics GmbH products are used in elevators, agricultural machinery, lifting equipment, and construction equipment. Their hydraulic drive and control systems are used in wheel loaders, excavators, and concrete boom trucks. The company also offers custom product design, engineering, and production to meet specific requirements.
PH Industrie-Hydraulik GmbH und Co. KG, founded in 1982 and headquartered in Ennepetal, Germany, is a manufacturer of tube and hose connectors. The company manufactures stainless steel tube and hose connectors for heavy-duty industrial applications, such as chemical plants, hydraulic engineering and railway technology. The products are manufactured to international standards and are certified to DIN EN ISO 9001:2015 by Lloyd’s Register. The company also provides product catalogs with detailed dimension lists and product specifications.
POK is a manufacturer of firefighting equipment founded in 1976 and based in Nogent-sur-Seine, France. The company's products include foam premixing eductors, hand nozzles, hose reels, valves, and manual monitors. These have applications in firefighting as well as in industrial facilities working with volatile substances. Aside from its products, the company also offers engineering, customization, personnel training, and maintenance services for customers needing additional assistance. Its clients include the French Air Force and Armed Forces, as well as local airports, fire brigades, nuclear facilities, and fire truck manufacturers.
Kangsaite Automation Group Co., Ltd, founded in 1997 and based in Zhejiang, China, is a manufacturer of pneumatic actuators, electric actuators, and valves. The company also manufactures different valve types, such as ball valves, butterfly valves, sanitary valves, and valve control devices. With two manufacturing bases in Xuancheng, Anhui, and Wenzhou, Zhejiang, the company manufactures over 300 different sets of equipment in the production plants and 300,000 sets of different valve types and exports to 60 countries worldwide. The company has quality system certifications, such as DNV ISO9001 quality management system certification, CE, FDA, SIL, and TS equipment manufacturing licenses.
WENZHOU PIONEER VALVE, founded in 1993 and headquartered in China, is a manufacturer of wafer type ball valves. The company offers diverse products including flush tank bottom ball valves, direct mounting high platform ball valves, and thin-type flanged ball valves. Additionally, it offers services such as repair, maintenance, and a complete line of spare and replacement parts. These products are used across various industries, including heavy-duty ball valves, refrigerant central air conditioning units, and high-temperature jacket chemical applications.
Bar Pneumatische Steuerungssysteme GmbH, established in 1979 and headquartered in Dattenberg, Germany, is a manufacturer of engineered automatic and manual fitting valves, drives, and related mechanical process technology. The company's primary products include pneumatic and electric actuators and automatic valves. Its accessory program for standardized actuator interfaces, such as signal units, positioners, and pressure boosters. As an engineering company, it specializes in providing custom process automation and data capture solutions used for the acquisition, transport, and storage in the petrochemical, gas, and oil industries.
Alco Valves Group, founded in the UK in 1977, is a manufacturer of valves for the oil and gas industry. The company's product range includes a wide range of control valves designed to regulate the flow, pressure, and temperature of various fluids and gases, ball valves, including floating and trunnion-mounted designs, butterfly valves for general-purpose and special applications, and check valves, including swing, lift, and dual-plate types, engineered to prevent reverse flow.
Blucast, established in 2007 and headquartered in Vilnius, Lithuania, is a manufacturer that specializes in providing a range of ductile iron valves and fittings. The company offers a range of products that include ductile iron valves and fittings, as well as castable resins for the jewelry industry. It also offers other items such as copper vacuum insulated bottles. Its resin is shrinkage-free, ensuring dimensional stability over time. It serves two different industries, the jewelry industry and the water supply sector.
Fr. Sauter AG, established in 1910 and headquartered in Basel, Switzerland, is a manufacturer with a specialization in automation, building management, and system integration. The company offers an extensive product portfolio that includes building management systems, stand-alone controllers, sensors and transducers, as well as pneumatic drives and valves. These products serve a wide range of applications, including environmental and engineering geophysics, seismology, and earthquake engineering, as well as non-destructive testing of concrete structures.
GEMÜ Group is a manufacturer of valves, measurement, and control systems for liquids, vapors, and gases, founded in 1964, the company is headquartered in Ingelfingen, Germany. The Group serves a wide range of industries, including pharmaceuticals, biotechnology, semiconductors, food and beverage, and chemical technology and more. Their solutions help customers reduce their carbon footprint and improve the sustainability of their operations.They have six manufacturing locations, alongside their manufacturing sites in Germany, they also manufacture their products in Switzerland, France, China, Brazil and the USA. Their worldwide marketing is carried out across 27 subsidiaries, coordinated from Germany.
AVS Römer, established in 1970 and located in Lower Bavaria, Germany, is a manufacturer that develops solutions for connecting, controlling, measuring, and transferring. The company offers a range of products including valves, fittings, and sensors. It also offers temperature sensors, pressure sensors, conductivity sensors, and motor-controlled metering valves. Its hyperfit connector is dead space-free, which prevents the accumulation of medium and microbiological growth, ensuring hygiene. The company has achieved ISO 9001:2015 for its quality management system. Its products are used in industries and market segments, such as agriculture, construction, mining machinery, medical engineering, and packaging industry.
Stampotecnica s.r.l. is a manufacturer of pneumatic components that was established in Emilia-Romagna, Italy, in 1969. The company operates in two divisions: Stampotecnica, which specializes in plastic parts engineering, construction and injection molding services, and its manufacturing division known as Aircomp Automation. Its products include pneumatic cylinders, valves, and regulators for various industrial applications. It also offers plastic parts as well as assemblies for use in chemical processing, automotive manufacturing, and medical devices. The company provides design, simulation, and prototyping services for unique client projects.
Valvoindustria Ing. Rizzio S.p.A., established in 1971 and headquartered in Valsesia, Italy, is a manufacturer that manufactures valves for plumbing, HVAC, irrigation, and industrial applications. The company offers a wide range of products, including valves, gate valves, plumbing fixture fittings, and trim products. It also provides flexible joints, air vents, and polypropylene. Its valves allow for a quicker and easier installation than the more traditional methods of soldering and threading. The company has achieved ISO 9001:2008 for its quality system. It serves a wide range of industries such as plumbing, HVAC, and irrigation.
M&C TechGroup Germany GmbH, established in 1985 and headquartered in Ratingen, Germany, is a manufacturer of gas sampling, gas conditioning, and process control solutions. The company offers a wide range of products such as gas sample probes, heated lines, pumps, coolers, and more. It also provides filters, analyzers, temperature controllers, and gas conditioning systems. Its gas sample probe SP10 can withstand temperatures of up to 180 °C [356 °F]. The company serves several industries such as glass industry, chemical industry, environmental technology, power plants, and more.
Goetze KG, based in Fort Mill, USA, is a manufacturer of all kinds of valves and fittings. The company manufactures valves for all kinds of applications, including industrial, cryogenic and hygienic applications. The range of valves include safety valves, pressure relief valves and shut-off valves. These valves offer a pressure range from 50 to 1500 bar, and are used from -270°C to +400°C temperature. With custom-fit production, it provides solutions for individual requirements. The company complies with the ISO 9001 and 14001 standards of quality and environmental management.
Mival S.r.l., established in 1967 and based in Italy, is a manufacturer of industrial valves. The company is highly specialised in bellow valves. The company's products are built according to EN and ANSI regulations. It’s goods are used in sectors like steam and diathermic oil, chemical, pharmaceutical, petrochemical, and food boiler systems. Due to the company's concern for the environment, a 172-kW solar system has been built on the factory roof. The company specialised in making sediment collection strainers, gate valves, joints, butterfly and ball valves, and valves for drinking water. It holds ISO 9001:2008 certification.
Mader GmbH & Co. KG, based in Leinfelden-Echterdingen, Germany, is a manufacturer specializing in coatings. Its product range encompasses industrial coatings, composites, resins, connection technology, and pneumatic cylinders, applied across various industries for protective coatings, material enhancement, and industrial processes. The company holds the prestigious EN 9100 certification, particularly vital in the aerospace sector, indicating a adherence to quality. The company also actively participate in environmental protection initiatives, including the Mäder Clean Walks, demonstrating its adherence to sustainability.
PFEIFFER Chemie-Armaturenbau GmbH, established in 1974 and headquartered in Kempen, Germany, is a manufacturer of industrial valves and control valve engineering products. The company offers a wide range of products such as globe valves, butterfly valves, ball valves, and more. It also offers rotary actuators, sampling systems, and pigging systems. Its products can take liquid samples from media flows without requiring a pipeline bypass. Furthermore, the company serves various industries, including healthcare, petrochemical, natural gas, and environmental industries.
Zhuji Yian Fire Equipment Co. Ltd., established in 2021 and headquartered in Zhejiang, China, is a firefighting equipment and accessories manufacturer and supplier. The company's products include compact portable high-pressure water pumps, portable high-pressure water misting machines, and floating pumps designed to draw water from water bodies, such as lakes and rivers. It also supplies lay-flat fire hoses, couplings, and gasoline-powered portable smoke extractor-blowers. These products can be used where fire-fighting vehicles cannot reach, such as forests, tunnels, and remote villages, and can also be used in emergency irrigation water supply, flood drainage, and high-rise building water provision.
Dansk Ventil Center A/S, established in 1999 and headquartered in Vejle, Denmark, is a manufacturer that specializes in valves and accessories. The company offers a wide range of products and services related to valves and accessories, including ball valves, butterfly valves, safety valves, steam traps, and strainers. It also offers in-house engineering and assembly services. Its ball valves are cheaper than other types of valves, which makes them a cost-effective option for installation. It serves a wide range of industries such as oil and gas, pharmaceutical, waste water, FnB, and more.
Rubinetterie Bresciane Bonomi S.p.A., founded in 1901 and based in Gussago, Italy, is a manufacturer of brass ball and butterfly valves. It has expanded its portfolio to include pressure reducers, heating components, and press fittings, and it also accepts OEM requests. It has five divisions, including marine and plumbing, and various ISO certifications like ISO 9001, ISO 14001, and ISO 45001. In 1967, the company was the first to create the patented two-ball valves, and in 2006, it added fittings to its portfolio. It is part of the Bononi Group, and it acquired Fra.Bo in 2019, and Chibro in 2023.
KTN, or Kara Technology News, founded in 2003 and based in Madrid, Spain, is a manufacturer of valves and instrumentation. Its product range includes various valve types like ball, butterfly, gate, globe, and control valves, each designed to meet diverse requirements for temperature and pressure resistance. It also offers a wide array of instrumentation devices for temperature and pressure measurement, along with automation products including limit switch boxes, and pneumatic actuators. The company complements its offerings with accessories like filters, compensators, sight glasses, and safety guards for a complete solution in the field of fluid control and measurement.
ARMATUREN-ARNDT GMBH is an ISO 9001 certified German manufacturer of industrial valves and fittings that was established in 1956 in Troisdorf, North Rhine-Westphalia. The company produces various fittings and valve models including valves with fluid indicator attachments, bulkhead couplings, and manometer gauge valves. It also offers banjo couplings, high-pressure shut-off valves, and hose fittings with an interlock for hydraulic hoses. The company’s products are mainly used by clients in the oil and gas, water treatment, power/energy generation, and biotechnology sectors.
Officine Meccaniche Industriali Srl (OMI) is based in Fogliano Redipuglia, Italy, and is a manufacturer of compressed air and industrial refrigeration products that was established in 1990 before its acquisition by Ingersoll Rand PLC in 2007. The company's portfolio comprises various products for compressed air treatment, liquid refrigeration, piping solutions, and related accessories. These include water or oil chillers, aftercoolers, butterfly valves, condensate separators, and refrigerator air dryers. The company's products are mainly used in the food and beverage, plastics, pharmaceuticals, and textile industries.
Zhejiang BaoShiJia Valve Co. Ltd., headquartered in Zhejiang, China, is a manufacturer that develops, designs, and sells valve products to customers. The company offers a wide range of products, including rising stem gate valves, cryogenic gate valves, cryogenic globe valves, swing check valves, floating ball valves, and more. It also offers stainless steel Y-strainers, flanged ball valves, and lift check valves. Its ball valves can withstand a temperature range of -20°C to 180°C. Additionally, the company has achieved the KC certificates. It serves a diverse range of industries, including oil refining, chemical processing, power generation, and more.
Highlight Tech. Corporation, established in Tainan City, in 1977 is a manufacturer engaged in vacuum valves, gate vales and vacuum components for ultra-high vacuum environment process engineers. The company's product range includes LED, Touch flat panel display, semiconductor, optoelectronics technology and film vacuum coating. The company has service locations in Taiwan, China and worldwide representatives in Europe, Asia, The USA and Australia. In 2022 the company entered the Chinese market by selling the equipment of Thin-film Photovoltaic, developed by HTC.
AIRpipe Corporation is a manufacturer and distribution of aluminum-fabricated industrial products that was established in Ningbo, China in 1997. The company primarily produces fittings designed for connecting pipes or other components, pipe systems in various grades (e.g. corrosion-resistant), and valves for controlling the flow or pressure along pipe systems. It also offers related accessories such as filters, couplings, and regulators. Aside from its products, the company provides various engineering services to its clients including custom product design, installation, and testing.
Velan, established in 1950, based in Ville St-Laurent, Québec, Canada, is a manufacturer of industrial steel valves, recognized as a standard-bearer in quality and innovation. The company manufactures valves that meet industrial needs in the areas of power generation, chemical and petrochemical, oil and gas, pulp and paper, and mining industries. Its product portfolio includes check valves, quarter-turn valves, specialty valves, and steam traps. All product valves are designed and manufactured carefully and incorporate many unique design features for environmentally friendly performance, simple maintenance, and quick service.
BELGICAST, established in 1957 and headquartered in Mungia, Spain, is a manufacturer specializing in pipeline and fluid control components. Its diverse range of products includes gate valves for fluid control, check valves to prevent reverse flow, and butterfly valves for flow regulation. Additionally, the company offers universal couplings for connecting diverse pipes and flanged adaptors and saddles for pipe connections. The company's product quality are highly regarded in the industry.
Wenzhou SanLo International Trade Co. Ltd., established in 2014 and headquartered in Wenzhou, China, is a manufacturer and distributor of mechanical and chemical valve solutions. The company specializes in machinery and auto parts, including mechanical seals and valves. It offers an extensive range of products, including IBC, ball, and PVC butterfly valves. It serves markets in Europe, South America, and Southeast Asia. The company provides a one-stop service encompassing design consultation, product development, and processing tailored to meet each customer's unique requirements.
Deenpu Machinery Equipment Co., Ltd. is a manufacturer of oil and gas drilling equipment, headquartered in Yancheng City, Jiangsu Province, China. The company's product offerings include plug valves, pup joints, hydraulic power units, as well as remote control panels, and hammer unions. These products meet or exceed API 6A, 16A, 16C, 16D, and 20E specifications. Its manufacturing facility spans over 20 acres, with manufacturing buildings covering 600,000 square feet, housing state-of-the-art processes.
RedFluid, established in 1985 and headquartered in Barcelona, Spain, is a manufacturer that specializes in manufacturing and stocks valves and fittings. The company specializes in needle, check, ball valves, customizing dimensions, connections, and more. It also offers needle-regulating valves suitable for instrumentation circuits. Its needle valves are resistant to both hot and cold temperatures. Furthermore, the company is ISO 9001:2015 certified. It serves various industries, including medical, aerospace, and alternative fuels.
Caoduro Impianti S.r.l., founded in 1998 and headquartered in Brendola, Italy, is a manufacturer of galvanic, industrial washing, and water treatment systems. The company also stocks air treatment systems and accessories, and its products are used in several industries, including medical, aerospace, and electronics. It has been in the industry for over 25 years and has over 150 plants worldwide. In 2013, the company founded WR Italia, a division that deals with water purification. Later, in 2014, it set up its first international facility in Korea, becoming the first outside the European Union.
Intertubi SPA, established in 1986 and headquartered in Brescia, Italy, is a manufacturer that specializes in the production and distribution of fittings, valves, and flanges. The company offers various products, including butt welding fittings, forged flanges, valves, and more. It also offers threaded fittings and hydroformed tees. Its threaded fittings offer easy installation and disassembly for connecting pipes. The company has achieved UNI EN ISO 9001 and UNI EN ISO 14001 certifications. It serves various industries such as the oil and gas, petrochemical, and energy sectors.
Marck & Care Engineers Ltd., founded in 1999 and located in New Delhi, Delhi, India, is a manufacturer, exporter, and supplier of industrial valves, sight glasses, automotive strainers, and steam traps. The company’s product catalog includes thermodynamic steam traps, industrial valves and valve fittings, butterfly valves, ball valves, and industrial pipe and tube fittings. Others are knife gate valves, globe valves, lined valves, gate and sluice valves, and pipeline accessories. These valves are used in industries, such as pharmaceutical, petrochemical, oil and gas, food and beverage, and more.
Huasheng Pipeline Technology Co., Ltd, founded in 1988 and based in Jiangsu, China, is a manufacturer of pipelines offering comprehensive piping system solutions. The company specializes in the production of a diverse range of products, including pipes, fittings, flanges, and valves. With ISO 9001 and ISO 14001 certifications, it ensures the stability and sustainability of its products. The offerings provide benefits such as robust corrosion resistance, high-pressure capability, and leak-tight connections, making them suitable for industries like oil and gas, petrochemical, water treatment, and more, adapting to emerging trends in the piping industry, both domestically and internationally.
Tianlong Machine is a Chinese ISO 9001 certified manufacturer of raw material processing equipment and components that was founded in 1996 in Wenzhou, Zhejiang. The company mainly produces equipment for concentration, extraction, and infusion procedures. These include liquid concentrators, herbal extractor tanks, and infusion/injector systems. The company also offers product installation, design, and after sales support services. It primarily serves clients in food and beverage processing, cosmetics production, and pharmaceutical formulation operations.
TLV, established in 1950, is a Japan-based manufacturer and supplier of steam engineering products such as fluid control equipment, system products, and maintenance instruments. The company offers fluid control equipment including cyclone separators, steam traps, automatic check valves, manifolds, and pressure-reducing valves used for steam, air, and water piping. The company offers maintenance instruments such as pocket trapman. The company also offers consultation, engineering, services, and the design and construction of steam and power systems. TLV has achieved ISO9001 and ISO 14001 certifications for standardization allowing their products to be used in logistics, building maintenance, chemicals, refineries, and petrochemical industries.
KIESELMANN GmbH is a manufacturer of valves and pipes originally founded in 1937 as a small turning shop in Knittlingen, Germany. The company fabricates tubing, tank fittings, valves, and fluid processing accessories. These include square or rectangular stainless steel profiles, tank top units, aseptic sampling valves, sight glass, and dirt traps. The company also offers engineering services for client breweries and distilleries, food and beverage processors, and pharmaceutical manufacturers in need of custom solutions.
SAFI is an ISO 9001-certified manufacturer specializing in corrosion-resistant plastic valves that was founded in 1963 and headquartered in Taulignan, France. The company specializes in producing industrial-grade, anti-corrosion thermoplastic and composite valves. Its products include butterfly valves that control or isolate the flow of liquids, ball valves for liquids or gasses, and diaphragm valves for sensitive or corrosive materials. It also offers related accessories such as actuators, sight glasses, and strainers. The company's products are mainly used in industrial processing facilities by clients in the petrochemical, water treatment, and power generation sectors.
Dynamic Corporation Limited (DCL) is a manufacturer of control system components founded in 2001 and headquartered in Wuhan, China. The company specializes in producing various explosion-proof, watertight, anti-condensation, and weatherproof industrial electric actuators and valves. These have a wide range of applications including in the pulp and paper processing, pharmaceutical manufacturing, shipbuilding, and HVAC industries. Aside from its products, the company also offers field or in-house testing, custom design, machining, and OEM/ODM services for customers in need of additional support.
Armaturenwerk Hötensleben GmbH, established in 1992 and based in Völpke, Germany, is a manufacturer of stainless-steel components. The company produces products such as fittings, strainers, sight glasses, pipes &assembly accessories, and tank equipment and supplies to food, cosmetics, chemical, and pharmaceutical industries. The products of this company are manufactured using manufacturing technologies in the area of cleaning technology, valve technology, and pigging technology and abides by ISO 9001:2015 standards. The company has offices in the USA, Netherlands and Belgium.
Böhmer GmbH, established in 1956 and headquartered in Germany, is a manufacturer of ball valves for industrial applications. The company's ball valves range from DN 3 to DN 1400, providing shut-off solutions for gases, liquids, and solids under pressures up to 800 bar. It produces fully welded, split-body, and subsea ball valves, including double isolation and bleed, emergency sealing, and anti-blowout stem features. Its valves are available in steel and stainless steel and for indoor and underground installations. The company's valves are used in district heating, oil and gas, and pipeline industries.
Penta Srl, established in 1977 and headquartered in Italy, is a manufacturer of metal-seated ball valves for extreme temperatures. The company's products include a WSS wafer, AP split body, and AP20P valves, serving food, chemical, and naval industries. It offers valves for high temperatures up to +700°C and low temperatures down to -200°C, and for abrasive and dangerous services. It employs Pentafite self-lubricating metal seat technology, graphite gaskets for extreme temperatures, and scraper rings for cleaning and protecting the ball in its products. The company's valves are tested for perfect tightness with body hydraulic, seat hydraulic, and seat pneumatic tests.
Comporato Nello S.R.L, established in 1968 and headquartered in Liguria, Italy, is a manufacturer of motorized valves, hydraulic interface units, and components for heating plants. The company offers a wide range of products, including a Sintesi 2-way ON/OFF motorized valve, FUTURA HP hydraulic interface unit, and strainers. It also offers Diamix PR and Compamix PR mixing/thermoregulating motorized valves and manual interception valves. Its motorized valve can help reduce energy costs for heating systems. Additionally, the company has achieved ISO 9001:2015 certification. It serves the heating and plumbing industries.
Bola-Tek Mfg. Co., Ltd., headquartered in Taichung, Taiwan, and founded in 1966, is a manufacturer of valve balls and stems. The company has expanded its product range to encompass several valve types, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its stainless steel and carbon steel products adhere to industry standards like ASTM, EN, JIS, and ANSI. It provides the API 607 fire-safe approved BT-V3WMH series, engineered for fire-safe performance. Additionally, it offers a 2-piece ball valve tailored for high-pressure applications, featuring a 6000psi rating.
Belven, established in 1974 and based in Belgium, is a manufacturer of valves. The company provides solutions for the construction and industrial markets and is active in more than 50 countries. It is specialised in making ball valves, butterfly valves, check valves, expansion joints, and knife gate valves. With a particular chemical tank storage solution, the company has created industry-specific solutions like BV4-BLEED, BV4-RECOVERY, and BV4-CONTROL. The butterfly valves are often provided with white EPDM with an FDA certificate. The ISO-9001:2015-certified company also holds the EAC and GOST-R certificates.
TOGNELLA S.P.A. is a manufacturer of industrial valves and fittings founded in 1957 in Somma Lombardo, Varese, Italy. The company produces a wide range of flow control products including cartridge flow control valves, pressure compensated double-acting flow control valves, and double-acting stackable control valves with adjustable handwheels. It also offers adjustable pressure switches and additional services, including product customization, analysis, and personnel training. The company’s products are primarily used by clients in the oil and gas, machine tool, and hydraulics industries.
Gefa Processtechnik GmbH founded in Dortmund, Germany, in 1964, is a manufacturer of industrial valves and filtration products. Products offered by the company are valves, fittings, pipe bends, filters, and pumps. Its burst disks rupture at a specific pressure to prevent overpressure incidents. They safeguard equipment and personnel by releasing excess pressure in industrial applications. The company’s products are certified by ISO-14001 and FDA. It is reducing its CO2 footprint and aims to be CO2-neutral by 2030. It also provides custom products, inspection, and repair services to its customers.
KSB SE & Co. KGaA is a Frankethal (Pfalz), Germany-based manufacturer and supplier of pumps, valves, valve actuators, and valve & pump automation equipment since 1871. Its valve product portfolio is composed of globe valves, control valves, diaphragm valves, swing check valves, and lift check valves with a diameter of 15-4000 millimeters and a nominal pressure of PN 6-500. They offer various types of pumps including ring-section, dry-installed, barrel pull-out, vertical shaft submersible, and submersible motor & borehole pumps. The company offers products used in various applications including chemical production, water technology, mining, building services, oil & gas technology, and water technology.
Athena Engineering S.R.L., established in 1984 with headquarters in Italy, is a manufacturer of industrial valves, pumps, and filtration systems. The company has five product brands: Athena for valves and level gauges; GE-STAR for industrial pumps; ROSITATECH for process control instruments; ASAPHTECH for filtration systems; and Valentech for actuators. The company's valve equipment includes ball valves, butterfly valves, strainers, and control valves. The company's industrial equipment and solutions are used in power generation, oil and gas, water distribution, mining, and the chemical industries, as well as other fields. It also provides engineering services that include consulting, commissioning, automation, and maintenance.
InterApp AG is based in Rotkreuz, Switzerland, and is a manufacturer of industrial valves and actuators that was established in 1969 as a member of the AVK Group of companies. The company’s products include ball valves for high purity or corrosive media, butterfly valves for standard industrial applications, and check valves designed to prevent backflow. It also offers pneumatic and electric actuators for controlling valves. The company is certified to ISO 9001, ISO 45001, and ISO 50001 standards. It chiefly serves clients in the mining, power generation, and chemical industries.
Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.
Blain Hydraulics GmbH, established in 1971 and headquartered in Baden-Württemberg, Germany, is a manufacturer that specializes in the design and manufacture of elevator control valves. The company offers a wide range of products, including lift component, pipe rupture valve, micro leveling drives, home lift, and lift valves. It also provides safety valves, rupture valves, components such as pumps and motors, accessories such as hand Pumps, and more. Its products have self-cleaning filters with a high tolerance to oil contamination. The company has achieved ISO 9001 certification for its quality management. Moreover, it serves the hydraulic elevator industry.
MHA ZENTGRAF, established in 1945 and headquartered in Saarland, Germany, is a manufacturer of high-pressure ball valves and flow control valves. The company provides fluid dynamic solutions, including a wide range of ball, needle, and check valves for various industries, including automotive, energy, marine, and more. It offers a comprehensive service package, from consulting and custom product development to production and installation, ensuring tailored solutions for controlling, throttling, or locking fluids. MHA LOGISTICS, a subsidiary within the MHA Group, handles the logistics and shipping, ensuring efficient packaging and dispatch of goods.
Bueno Technology Co., Ltd. is a manufacturer and supplier established in 1969, specializing in providing flow control products, and is headquartered in Tainan City, Taiwan. Their product range encompasses water and oil-free valves, fittings, and components for industries such as pharmaceutical, semiconductor, optoelectronic, electrochemical, and petrochemical. These products ensure the safety and stability of the manufacturing process. Bueno Technology Co., Ltd. has factories located in Taiwan, China, and Vietnam. The company has achieved several international standards, including ISO 9001-2000, ISO 14001, and AD200W, for its quality and environmental management systems.
Fitok Group, established in 1988 and located in Wuhan, Hubei, is a manufacturer that produces general instrumentation valves and fittings. The company offers a wide range of products, including instrumentation valves, fittings, manifolds, filters, and 2D/3D drawings. It also offers hoses, tubing, sampling systems, tooling, and subsea Products. Its product acts as a barrier, preventing active compounds from reacting with or adsorbing to the stainless steel. The company has received ISO 9001:2015, ISO 15848, and ASTM F1387 certification. It serves a wide range of industries such as oil and gas, petrochemicals, thermal power, nuclear power, and hydrogen applications.
Golden Mountain Enterprise Co., Ltd. (GMEC) is a Taiwanese manufacturer of industrial products and instruments founded in 1980. The company produces various valve, pressure, flow, and temperature system components for use in chemical processing, food processing, pollution control and oil refining. GMEC is an ISO9001 certified company, with an extensive product portfolio including Venturi tubes, butterfly valves, manometers and temperature controllers. These supply industrial processes in sites like breweries, chemical plants and wastewater treatment facilities.
FLAPCON, established in 2017 and headquartered in Istanbul, is a manufacturer specializing in a diverse range of industrial valves. Its product portfolio encompasses industrial valves, actuators, accesssories, connectors, instruments. These products cater to various industries, including oil and gas, chemical, mining, power generation, and water treatment. The company's products are crucial components in controlling fluid and gas flows across applications like pipelines, processing facilities, and industrial machinery, ensuring efficient and safe operations.
Effebi Spa is an Italian ISO 9001:2015 and DVGW-certified manufacturer of brass valves that was established in Bovezzo, Brescia in 1973. The company produces butterfly valves for air or liquids, ball valves for gas or steam, and diaphragm valves for abrasive or corrosive fluids. It also offers valves utilizing pneumatic or electric actuators, specialized valves for solar systems or irrigation, and related accessories such as fittings. The company’s products are commonly used in the agricultural, petrochemical, and solar energy industries, as well as in heating, cooling, and plumbing systems.
UNIVER S.p.A., founded in 1971 and headquartered in Milano, Italy, is a manufacturer specializing in industrial automation components. Its product line encompasses pneumatic automation solutions, including cylinders, advanced valves, air treatment units, fittings, and accessories, as well as automotive manufacturing components like power clamps, pin units, grippers, and more. Additionally, the company offers a modular tooling system and electric automation products. The company is a ISO 9001 certified since 1991, reflecting its adherence to excellence in the industrial automation sector.
Uflow Automation India, established in 2008, is an ISO 9001:2015 certified manufacturer and supplier of prime solenoid valves, and other control system valves based in Gujarat, India. The company offers various types of valves and automation solutions including Pneumatic Directional Control Valves used in aircraft and aerospace, Angle Seat Valves, Butterfly Valves as well as Pneumatic Actuators and Solenoid Valves used for various control automation applications in the chemical & pharmaceutical, oil & gas, power generation as well as food & beverages industries.
Budenberg Gauge Co. Ltd., a British manufacturer of instrumentation based in Altrincham, Cheshire, Greater Manchester, was founded in 1850 as Schaffer & Budenberg before its acquisition by the Budenberg family in 1914. The company's product portfolio includes pressure gauges, temperature gauges, as well as gauge accessories and ancillaries. It also supplies various types of valves and calibration kits. The company further offers Budenberg Technical Services (BTS), covering repair, recalibration, and certification, training courses, as well as on-site and bespoke services. The company serves various industries, including the chemical, food and beverage, oil and gas, petrochemical, as well as water and wastewater sectors.
Henry Group Industries, established in 1914 and based in Harbour City, Tsim Sha Tsui, Hongkong is a manufacturer of components for the commercial refrigeration and air conditioning industry. The company is international, with operations in Australia, China, Germany, the United Kingdom, and the United States. The company's products include automatic controls, fan motors, filters and dryers, heat exchangers, and safety devices. Its pressure vessels meet CE, UL/ASME, AS1210, and TSG codes. The goods of the company are fully compliant with ISO 5149 certification. Each component has a unique QR code for identification.
Marinetech Edelstahlhandel GmbH & Co. KG is a manufacturer of rust-proof as well as stainless steel connecting elements established in 1993 and based in Bremen, Germany. The company produces various yachting or boat components for connections, riggings, and rail repair, as well as window and door accessories. These include carabiner hooks, turnbuckles, maintenance tools, hinges, and snap fastening systems. Aside from its products, the company also offers private labeling services. Its products are primarily used within the yachting and boat building industries, with additional applications in the architecture and DIY markets.
NTGD Valve (China) Co., Ltd. is a manufacturer and supplier of industrial valves that was established in 1991 and is headquartered in Kaifeng, Henan, China. The company produces a wide range of valves, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its products, such as Forged Ball Valves, Flange Globe Valves, Wedge Gate valves, Lubricated Plug Valves, Dual Plate Check Valves, and Swing Check Valves, are used by a number of industries, as diverse as oil and gas, power generation, and water treatment industries.
CWT Valve Industries, part of CanaWest Group, was founded in 2004, headquartered in Calgary, Alberta, Canada, is a global manufacturer of valves and strainers. The company’s products are used extensively in different industries such as oil & gas, petrochemical, power generation, mining, marine, and construction. It builds its products in many configurations, trims, sizes, and pressure classes to meet the needs of its customers. Apart from designing and manufacturing standard and common valves, it also specializes in producing tailor-made valves and strainers from a wide range of materials, including special alloys. It is an ISO9001:2015, ABSA, and API607 certified supplier.
OMAL S.p.A., established in 1981, is a manufacturer of quarter-turn pneumatic and electric actuators, along with ball, butterfly, and pneumatic valves, based in Rodengo Saiano, Brescia, Italy. The company's product line serves industries such as food, chemical, pharmaceutical, power as well as energy and naval sectors. With ISO 9001:2015 and AD2000 certifications, the company strategically invests in technical expertise and customization. It is a family-led business with over 100 employees across two locations in Italy.
Proportion-Air, Inc., established in 1985, is a US manufacturer of electronic air pressure regulators and air flow control valves located in McCordsville, Indiana. The company produces various regulators, including flow controllers, pressure transducers, volume boosters, and safety regulators, that accept analog and digital signals. Additionally, they supply auxiliary accessories for their products. The company services several markets, such as industrial manufacturing, transportation, aerospace, pharmaceutical, and food processing. Product uses include water jet cutters, aircraft fuselage testing, and medical testing.
Saint-Gobain Life Sciences, headquartered in Solon, Ohio, is a manufacturer of polymer solutions and components that support the electronics, medical, and biopharma industries, among others. Its bioprocess solutions division provides material science-based solutions like silicone tubing and filtration products for single-use fluid management. The medical business manufactures custom medical components like cartridges and capsule filters and designs systems for medical devices. The consumer solutions business provides customer support to achieve performance, safety, and regulatory compliance, and it provides customized solutions like flowmeters, seals, and tubing. The electronics division manufactures products like valves and fittings for fluid handling applications.
Tyco Fire Protection Products, based in Landsdale, Pennsylvania, serves as a manufacturer and supplier of diverse fire suppression systems for various applications spanning commercial, industrial, and residential sectors. Its product line encompasses extinguishing agents, sprinkler systems, and valves. The company also offers piping products, firefighting equipment, and services. Its water-based fire products range from automatic sprinklers, system valves, to electrical devices. Its global technology portfolio comprises several brands, including TYCO, ANSUL, and GRINNELL.
DK-Lok USA was established in 2010 and is the U.S.-based subsidiary of South Korean industrial parts maker, DK-Lok. DK-Lok serves industries such as offshore & onshore oil production, automotive & hydrogen fuel cells, shipbuilding & marine engines, petrochemicals & refinery, power plant, railway vehicles, and semiconductors. DK-Lok USA’s primary offerings are valves, fittings, regulators, hose, tubing, quick connectors, and tools such as hydraulic swaging units, electric swaging units, presaging tools, and tube & hose.
NSK Americas, Inc., founded in 1973 with headquarters in the USA and facilities worldwide, is a global manufacturer of bearings, automotive components, and precision machinery. The company's product line includes numerous bearings, direct-drive motors, cartesian robots, automotive wheel hub units, and steering systems. NSK's products are used in various manufacturing industries for optimized production and automation, including automotive, chemical processing, construction, steel, and consumer product manufacturing markets. An example is the company's Monocarriers MCH Series, which features high-rigidity rails used for cantilever beams and other factory automation applications.
Schenck Process was founded in 1881 in Darmstadt, Hessen in Germany, with a US headquarters in Kansas City, Missouri. The company is a manufacturer of weighing and measuring tools and systems for customers in manufacturing, packing, water treatment, and other industries requiring precise measurement services. The company produces industry-specific products such as feeders for infrastructure and food processing industries. Other products include conveyors, filtration equipment, and thermal processing equipment. The company’s services include installation, repairs, upgrades, testing, and training employees in optimal equipment usage.
Zeppelin Systems GmbH, founded in 1950 and headquartered in Friedrichshafen, Germany, is a material-handling plant solutions manufacturer. The company designs, constructs, and upgrades industrial plants for storing, conveying, and weighing bulk materials and raw materials in plastics, rubber, food, and other industries. It provides all plant engineering services, including basic engineering, component production, control technology, and final assembly. The company also offers aviation and industrial services for assessing product quality in manufacturing, maintenance, and emergencies.
Wenzhou AEA Valve Co. Ltd. is an API-6D, PED-CE, and TS-certified manufacturer of valves for the industrial sector founded in 2008 and located in Wenzhou, Zhejiang, China. The company offers globe valves for regulating or throttling flow, gate valves for controlling flow in pipelines, and check valves for preventing backflow in complex systems. It also offers ball valves for regulating or controlling pressure, and specialized valves by customer specifications. The company’s products are commonly used by clients in the oil and gas, petrochemical processing, and power generation industries.
Martin Lohse GmbH, established in 1908 and headquartered in Baden-Württemberg, Germany, is a manufacturer of steel and stainless steel products for the paper, chemical, and waste disposal industries. The company’s products include shut-off valves, regulating and reject valves, and mechanical engineering solutions. It offers valves with a service-friendly design for easy maintenance and low life cycle costs. The company's products find application in handling various materials, including pulp, granulate, and viscous media. It also provides spare parts, repairs, and test plant provision services.
Festo Corporation, established in 1925 and headquartered in Esslingen, Germany, is a supplier of automation technology and technical education and is ISO 9001, ISO 13485, and ISO14001 certified. It has around 33,000 catalog products, customized components, and ready-to-install solutions, including grippers, motors, and sensors used in industrial and process automation. The company won the German Future Award in 2010 and serves 300,000 customers worldwide, while its education division provides training solutions for 56,000 industrial companies and educational institutions. It registered €3.81 billion in the 2022 financial year and is available in around 60 countries, with 2,600 patents worldwide.
Spirax Sarco is a manufacturer and supplier of steam system solutions, providing products and services to industries, including food and beverage, pharmaceuticals, chemicals, and more. The company was established in the UK in 1888 and has since expanded to over 60 countries worldwide, with its US headquarters based in Blythewood, South Carolina. One of their products is the TD62 Thermodynamic Steam Trap, which offers high efficiency and reliability for condensate removal in steam systems. They received awards like 2019 Innovation Award from the Institute of Chemical Engineers (IChemE) for their EasiHeat engineered system.
Aliaxis is a Belgian ISO 9001 and OHSAS 18001 certified manufacturer of piping systems that was established in Brussels in 2003. The company’s product lineup includes plastic pipes and fitting systems for a range of industrial applications. These include utilization in energy distribution, ventilation systems, and farmland irrigation. It also offers custom design and manufacturing services for unique customer projects. The company chiefly serves its clients in the chemical processing, agricultural, and renewable energy sectors.
Generant, established in 1930, and headquartered in Butler, New Jersey, is a manufacturer and supplier of valves, pressure regulators, and instrument tube fittings. The company's product range includes pressure relief valves, check valves, needle valves, shut-off valves, and pressure regulators. Catering to various industries such as industrial, medical, and cryogenics, the company's services comprise of quality solutions and technical expertise. Besides, its accreditations include ISO 9001:2015 for quality management, API 6D for pressure relief valves, FM Global Class 1 for fire protection valves, and ASME BPE for cryogenic valves. With a history spanning decades, they consistently uphold good products and services.
Honeywell, founded in 1906, in Wabash, Indiana is manufacturer of automotive parts, building technologies, and performance and safety materials for aerospace, The company's product portfolio includes electronic guidance systems, cockpit instrumentation, lighting, automotive parts, and primary propulsion and secondary power turbine engines. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. Their headquartere is located in Carolina and they have global sales offices and distributions channels.
Fluidra S.A., founded in 1969 and based in Spain, is a manufacturer of valves and fittings using thermoplastic materials. The company also distributes its products to irrigation, swimming pools, and industrial markets. With centers in 46 countries and 136 sales branches, the company offers various other products, such as PVC pressure fittings, PP compression fittings, check valves, ball valves, and irrigation fittings. All its products are made by abiding by the ISO 9001 quality standards.
Alfa Laval Corporate AB was founded in 1883 and headquartered in Lund, Sweden. Alfa Laval serves energy, utilities, home, personal care, food, dairy, beverage, marine, transportation, pharmaceutical, biotech, water, and wastewater industries. Alfa Laval provides heat transfer, separation, and fluid handling products and solutions worldwide. Alfa Laval operates in three divisions: Energy, Food & Water, and Marine. Alfa Laval offers oil & gas-fired steam and composite steam boilers, exhaust gas economizer, and ballast water treatment systems, and exhaust gas cleaning products. Alfa Laval also provides sensing and control, cleaning validation, condition monitoring, agitators, tank, powder mixers, fittings, and tubes, as well as wall mounted cleaning nozzles, rotary jet and heads; and tank accessories and covers.
GESTRA AG is headquartered in Bremen, Germany, since 1902 as a designer and manufacturer of valve and control systems. The company deals in boiler controls, steam traps, isolation, and control valves. It also offers check valves, strainers, and service control valves. The products have multiple applications in general manufacturing, chemical, power generation, boiler manufacturing, and oil & gas industries. The products are also essential in maximizing system efficiency and minimizing water consumption in the pulp and paper market. Its services include system auditing, project engineering, steam trap surveys, and automatic broiler control.
PEROLO SAS, founded in France in 1919, is a manufacturer of tank safety and fluid transfer equipment for oil, chemicals, powders, liquefied gas, and foodstuffs. The company has subsidiaries in Belgium, the UK, Poland, Singapore, and China as well as a network of experts representation around the world. It produces 4 complete ranges of valves and fittings, safety relief valves, bottom and top discharges, and airline and accessories for ISO tank containers.
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
Bray International, Inc., incorporated in 1986 and headquartered in Houston, Texas, USA, is a global manufacturer of flow control and automation products and accessories Its product line includes butterfly valves, ball valves, knife gate valves, control valves, and check valves. It also offers actuators, cryogenic products, and control accessories, including solenoids, sensors, and switch boxes. The company's performance-tested products meet various global certifications and approvals, including Lloyd's Register, UL, ABS, and more.
Aalberts, established in 1975 and headquartered in Charlotte, North Carolina, is a manufacturer and supplier specializing in integrated piping systems for the distribution and control of liquids and gases. The company’s product portfolio includes ball valves, butterfly valves, safety relief valves, fasteners, and more, catering to residential, commercial, industrial, and utility sectors worldwide. The company also offers vertically integrated designs, white label manufacturing of valves, fittings, and other piping system components for diverse projects. The company’s has a team of plumbing and mechanical system experts that provide technical support services to customers.
SPX Flow, established in 1912, is a manufacturer of industrial machinery to solve processing challenges based in Charlotte, North Carolina. The company manufactures various machinery such as mixers, pumps, valves, homogenizers, and heat exchangers. The machinery is used in nutrition, health, mining, construction, and chemical industries. The company provides services such as designing, engineering, and installing turnkey process units or full-scale plants. The SPX Flow brands include Anhydro, Bran+Luebbe, Gerstenberg Schrӧder, Pneumatic Products and Seital Separation.
HANSA-FLEX, been in business since 1962 and headquartered in Bremen, Germany, is a manufacturer of various types of hydraulic products and services. The company produces hoses, hose fittings, couplings, pipe fittings, and ball valves. It also fabricates hydraulic components, flanges, adapters, and pipes. The variants of its hoses, braided hoses, are oil, high-temperature, ozone, and weather-resistant. It has more than 80,000 parts relating to all aspects of hydraulics. It could also configure the customers’ hose lines based on their required specifications.
Temper LLC, founded in 2013 and headquartered in Kurgan, Siberia, Russia, is a manufacturer of steel ball valves. The company is a manufacturing plant for the serial production of steel ball valves that are designed for installation in pipelines intended for transportation of oil and gas, heat supply systems, and process pipelines. It offers numerous variations, including a gas series, a long-stem series, and balancing ball valves, which can be configured for selection on the company's website. In 2020, the company reached a new design capacity with the production of more than 500 thousand ball valves per year.
BEULCO GmbH und Co. KG is a German manufacturer of water supply components and systems that was established in Attendorn in 1951. The company’s products include water supply system components, such as regulators, valves, and couplings. It also offers development and production of custom brass parts, castings, and forgings. The company is certified to ISO 9001, ISO 14001, and ISO 45001 standards, and chiefly serves clients in the water supply, civil engineering, and industrial sectors.
Grupo de Incendios, headquartered in Soria, Spain, is a manufacturer that designs, develops, sells, and produces fire protection and prevention equipment. The company offers a wide range of products, including fire extinguishers, fire hoses, fire cabinets, and fire hydrants. It also offers sprinklers, fittings, nozzles, hoses, and valve control. Its products can provide access to water and other fire suppression materials, helping to prevent the spread of fire to other areas. The company has achieved CE and A21/000063 certifications. It serves industries such as commercial, industrial, and residential buildings.
Avcon Controls Pvt. Ltd., established in 1969 and based in India, is a manufacturer of solenoid valves, ball valves, and butterfly valves with pneumatic and electric actuators. The company also produces gas control and regulation products and valves for the pharma and biotech industries. The company's products have received approval from consultants as well as users, OEMs, and other parties. It holds ISO 9001 certification and the products are used in the textile and cement industries, the pharma, biotech, food, and petrochemical industries, and also in the bakery.
Ezfitt, founded in 2012 and headquartered in Marseille, France, is a manufacturer of ball valves. Since introducing the first ball valves in France at the end of the 1960s, the JWB group has revolutionized taps. At the end of the 1990s, the company introduced a new range of ultra-qualitative ball valves with new axle sealing and traceability by batch number and manufacturing date. The Ezfitt company was dedicated to manufacturing it. The company's latest product range, the NF-certified ball valves, is easily recognized by the NF logo. These products offer guaranteed quality material, reinforced handles and stops, and guaranteed tightness.
Brandoni Valves, established in 1961, and based in Piedmont, Italy, is a manufacturer of industrial valves. Its diverse product line encompasses shut-off valves, check valves, joints, solenoid valves, and actuators. These quality products find application across diverse industries like water treatment, power generation, oil and gas, and chemical processing. The company's precision-crafted products are tailored to control and regulate fluid and gas flow, ensuring efficiency and quality in critical processes.
Nencini Srl, established in 1967 and based in Italy, is a manufacturer of hydraulic valves. The company produces discharge valves for potable and irrigation water pipelines and air valves for hydraulic power plants. In 2022, the company becomes a member of the OMB Valves Group. The company's quality system complies with EN ISO 9001:2015, an international standard. The company specialised in air valves, needle valves, fixed cone valves, and butterfly valves. Every valve undergoes final workshop hydrostatic tests as per international standards.
Famat, established in 1974 and headquartered in Fribourg, Switzerland, is a manufacturer that specializes in valve technology and supplies valve packages. The company offers a wide range of products, including expanding piston technology valves, butterfly valves, gate valves, and check valves. It also offers air and vacuum valves, automatic control valves, control valves with actuators, and ball valves. Its products are based on its patented EPT system, which eliminates the need for O-rings and leaves no dead space. It serves various industries such as water works, power generation, petro-chemical, oil, and pharmaceutical.
UZTPA LLC, established in 2009 and headquartered in Moscow, Russia, is a manufacturer that produces valves for industrial, fuel, and energy complexes. The company offers a wide range of products, including Aquarius-Balance control valve, Ugresha plate and frame heat exchangers, and Ugresha butterfly valves. It also provides flanged rubberized gate valve Ugresha, DN810, PN10, and ball valve. Its control ball valve allows leaving the ball in an intermediate position without damaging the shut-off element. The company has achieved GOST ISO 9001 and STO Gazprom 9001 certification. It serves various industries, including industrial, housing and utilities, fuel, and energy.
OUMING VALVE GROUP CO. LTD. is a manufacturer of stainless steel valves and related products that was established in 1983 in Zhejiang, China. The company primarily produces piece ball valves, multi-port ball valves, and automatic ball valves for regulating or controlling the flow of liquids. It also offers various pipe fittings and castings, as well as custom design and manufacturing services for unique projects. The company is certified to CE, API6D, and API607 standards, chiefly serving clients in the natural gas, chemical processing, and water treatment industries.
STÜBBE, established in 1925 and headquartered in Vlotho, Germany, is a manufacturer of pumps, valves, and instrumentation systems made of thermoplastics. The company's range of products includes pumps, valves, instrumentation systems, and ball valves. It also provides round-the-clock service and spare parts delivery for customers. The company's products are chemical resistant and can withstand exposure to various chemicals and chemical mixtures. The products find ideal applications in various industries, including environmental technology, surface technology, chemical industry, metallurgy, and mining.
TECOFI, founded in 1985 and based in Corbas, France, is a manufacturer of industrial valves and fittings. Its product range includes butterfly valves for fluid control, knife gate valves for handling thick fluids, resilient seat gate valves used in flow regulation, ball valves for precise control applications, and check valves to prevent backflow. Its products are used in industries such as water and wastewater treatment, power generation, oil and gas, and chemicals. The company is known for its expertise in valve design and production.
ECONEX S.R.L. is a manufacturer of industrial combustion components as well as HVAC actuators that was established in 1997 and is based in Milan, Italy. The company's products include flame and tightness control devices, pressure regulators, solenoid valves, electric actuators, and flexible metal hoses. It also offers complete as well as assembled industrial gas trains. The company's products are mainly used by clients in the ceramic, heating, glass, food production, and metal industries.
KITZ SCT Corporation, established in 1951 and based in Japan, is a manufacturer of fluid control devices and equipment. The company produces products such as ultra-high purity gas valves, vacuum exhaust valves, fittings, and thermoplastic valves and supplies to semiconductor manufacturing processes. With 12 companies in Asia, America, and Europe, the company manufactures products used in different phases of semiconductor and FPD manufacturing. All its products are designed according to the ISO 9001 quality standards.
Watts was established in 1874 and is a manufacturer of water management products based in North Andover, Massachusetts, United States. The company offers various water solutions products such as automatic control valves, gas connection systems, pressure reducting valves, water quality parts, and high purity process piping systems. The products have been used for serving various industries such as healthcare, agriculture, hospitality, commercial, and municipal waterworks. The products have been created under compliance of CSA, NSF International, WQA, BSI, and AGA manufacturing standards.
Tuning (France) is headquartered in Marseille, France, and is a manufacturer of industrial valves for fluid and gas control that was originally established in 1996 before being acquired by JWB Holding in 2017. The company's products include electric knife gate valves, manual 2-3 ball valves, electric actuators, double-acting or spring return valves, and pneumatic actuators. These products are mainly used in the food and beverage, chemical, petrochemical, pharmaceutical, and marine sectors. Aside from its products, the company also offers services such as technical support, maintenance and repair, and product customization.
Bürkert Fluid Control Systems, founded in 1946 and headquartered in Ingelfingen, Germany, is a manufacturer of liquid and gas measurement and control systems. Its product range includes solenoid valves for fluid power systems, process and control valves for managing flow, pressure, and temperature, pneumatics and process interfaces for automation control, sensors, transmitters, and controllers for measuring physical and chemical parameters, and MicroFluidics solutions for precise fluid control. Its products serve diverse industries like breweries, labs, medical, and aerospace.
Hydroscand is based in Stockholm, Sweden, and is a manufacturer of hoses and fittings that was established in 1969 before becoming part of Germany’s Heidenhain Group. The company’s product lineup includes both industrial and hydraulic hoses, fittings, adapters, and flanges, as well as hose assembly machines and hose protection accessories. The company also offers custom manufacturing services for unique projects. It’s products are used mainly by clients in the construction, transportation, agriculture, and offshore industries.
Pelican Worldwide, founded in 1986 and headquartered in Rotterdam, Netherlands, is a manufacturer and supplier specializing in tank parts, gaskets, and seals. The company’s product portfolio includes gaskets, seals, manlids, valves, and other tank parts. Their products are designed to enhance the efficiency of tank containers and trailers, catering to the needs of companies in transportation, logistics, and storage of liquids and bulk materials. Pelican holds ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certifications. The company serves customers worldwide with manufacturing sites in China and the USA, along with sales offices in Dubai, Istanbul, Rotterdam, and Singapore.
Keckley Company was established in 1914, and is headquartered in Skokie, IL, the company is a family manufacturer of valves and strainers. The product portfolio of the company includes Ball Valves, Check Valves, Pipeline Stainers, Knife Gate Valves, Float and Lever Valves, and many more. The business works on the development of basic principles in customer service and product standards. The initial production of the company was on steam and liquid control equipment. Over time, the company has expanded the product line to meet the requests of the customers.
SLB was founded in 1926 and is a manufacturer of oil products and equipments based in Houston, Texas, United States. The company manufactures various products such as geopolymer cement-free system, nested multistage compact wellhead, 3D-printed armor, dual-string barrier evaluation, and autonomous directional drilling. The products are used and applied in oil drilling industry. The company has obtained the ISO 14001 certificate in 2020 and complied to HAZWOPER standards for hazardous waste management.
KLINGER was established in 1886 in Gumpoldskirchen, Lower Austria, as a manufacturer and supplier of industrial sealings, fluid control systems, and fluid monitoring systems. The company's product list comprises KLINGER CNAF gaskets, KLINGER ball valves (INTEC Range), and Reflex level gauges, among others. The products provide sealing solutions for critical applications requiring chemical resistance and temperature management, precise flow control and shut-off functionality in industrial processes, and essential liquid level monitoring for safe operations. The company serves various industries, including general manufacturing, automotive, infrastructure, marine, and food and beverage.
AIRTEC Pneumatic GmbH, established in 1975 and headquartered in Kronberg, Germany, is a manufacturer and supplier of pneumatic control technology. The company's product portfolio includes electrically operated valves, proportional air regulators, and pneumatically operated valves. These products find applications in various industries, including automotive, aerospace, and manufacturing and industrial automation. The company is ISO 9001:2015 certified for quality management, with distributor partners globally selling its products in various countries, including Canada, the United States, and China.
Samson is a manufacturer and distributor of control equipment for industrial processes that was founded in 1907 in Frankfurt am Main, Hesse, Germany. The company specializes in products for controlling the flow of industrial liquids, including modular controllers for automation systems, solenoid valves, and pressure sensors. It also offers digital solutions for process optimization and data analysis operations. The company chiefly serves clients in the food and beverage, power generation, and petrochemical industries.
DAYU Irrigation Group is a manufacturer and supplier of irrigation equipment founded in 1999 and headquartered in Beijing, China. The company's portfolio encompasses products like drip tape, pipe and fittings, drippers and sprinklers, sprinkler irrigation equipment, lay-flat hose and fittings, as well as various other categories. DAYU, a state-level high-tech enterprise, collaborates with engineering and scientific institutions to address and resolve agricultural and water resource challenges in rural areas. The company provides irrigation services, which encompass the integration of water conservancy and hydropower project consulting, survey and design, as well as project general contracting and construction.
Mertsan Pump, a company founded in 1999 and headquartered in Konya, Turkey, is a manufacturer and supplier specializing in pumps and control units. The company's product portfolio includes regulators MTS-100 BY, four diaphragm pumps with pulleys, and standard plastic hollow cones. The company's primary industry is agriculture, where farmers and agricultural businesses utilize its products for tasks such as irrigation, spraying pesticides or fertilizers, and other activities related to crop cultivation. The company provides services, including product support, training, and repair.
EM-Technik is a manufacturer and supplier of fittings and connectors fabricated from special plastics that was established in Maxforf, Germany, in 1965. The company’s products include couplings, fittings, and valves for controlling or regulating the flow of liquids in industrial processes. These are fabricated from chemical-resistant fluoropolymer plastics such as PEEK, PTFE, and PVDF. It also offers related accessories, including clamps, tubes, and seals. The company’s products are used mainly by its clients in petrochemical processing, power generation, and water and wastewater treatment.
G. Bee GmbH, founded in 1909 and based in Freiberg am Neckar, Germany, is a manufacturer and supplier of ball valves and safety valves. The company’s product portfolio includes automatic ball valves, gas ball valves, and cap valves with drains. These products are used in various applications, including the oil and gas industry, rail transportation, and transformer technology, providing ball valves for use in vacuum applications. The company is ISO 9001 certified and exports its products to the United States, Australia, and Slovenia.
Praher Plastics Austria GmbH is a manufacturer and distributor of industrial piping system products made from technical plastics that was established in Schwertberg, Austria, in 1971. The company produces unplasticized PVC (PVC-U) pipes, fittings, and accessories for a range of industrial applications. It also offers various valves, such as diaphragm, check, and multiport models of different sizes and series. The company is certified to ISO 9001 standards, and chiefly serves clients in Austria’s industrial chemical, water treatment, and biotech industries.
KLINGER Fluid Control GmbH is based in Gumpoldskirchen, Austria, and is a manufacturer and supplier of industrial valves that was established in 1886 as a subsidiary of the KLINGER Group of companies. The company’s product lineup includes piston valves designed for wear or corrosion resistance, as well as ball valves for standard industrial applications. It also offers manometer cocks for providing shut-off functionality to measurement devices, and borosilicate gauge glass for level monitors in tanks or pipelines. The company’s products are used primarily by clients throughout Europe’s industrial manufacturing and processing sectors.
KLINGER SCHÖNEBERG GmbH, founded in 2000 and based in Graben-Neudorf, Germany, is a manufacturer and supplier of ball valves. The company produces products such as automated ball valves, AB cocks, shut-off valves, and measuring instruments and supplies for the hydrogen and energy industry. The products of the company are used in different applications, including chemical, petrochemical plant, and mechanical engineering industries. The company holds DIN EN ISO 9001:2015 quality management certification to follow the set quality standards while manufacturing the products. The company also has CRN certification for all regions of Canada and TTC - Chinese Type Test Certificate.
MEDENUS Gas-Druckregeltechnik GmbH, founded in 1972 and headquartered in Olpe, Germany, is a manufacturer and supplier specializing in gas pressure regulation equipment. The company's range of products includes gas pressure regulators, gas ball valves, and gas filters. These products find applications in various industries, including the chemical industry, food and beverage, and research and development. The company also offers services, including training customers on the use of its products, technical support, and maintenance. The company sells its products to various countries, including the United Kingdom, the Czech Republic, and Egypt.
Pekos Valves, established in 1988 and headquartered in Montmeló, Barcelona, Spain, is a designer, manufacturer, and supplier of ball valves. The company's product portfolio includes more than 35,000 valves made with different materials and configurations of ball valves for the oil and gas, petrochemical, and pharmaceutical industries. Individual products include floating soft-seated, guided soft-seated, and reduced-bore valves. The company offers custom ball valve manufacturing, supported by complete logistics services for the direct supply of custom and standard ball valves.
Oleoweb S.r.l., established in 2004 and based in Cadelbosco di Sopra, Reggio Emilia, Italy, is a manufacturer and supplier of hydraulic components and valves. The company's product range includes insert valves, check valves, hose burst valves, flow control valves, and in-line valves. These products are utilized in applications like agriculture, earthmoving, lifting movement, and hydraulic components. It serves industries such as agriculture, industrial services, earthmoving, and lifting movement. The company's services include product study, custom component design, realization of specific components, and providing hydraulic expertise.
TongLing TianHai Flow Control Co.，Ltd., established in 2012 and based in Tongling City, China, is a manufacturer and supplier of valves and pumps. The company's product portfolio includes resilient gate valves with brass nuts, hydraulic control valves, and dry barrel outdoor hydrants. These products are used in various applications, including drainage systems, maritime or shipbuilding, and water supply and distribution. The company offers technical support and warranty assistance to its clients. The company holds ISO 9001 certification and sells its products to various countries, including the United States, Australia, and South Africa.
MasterTubi is an independent manufacturer and distributor of flexible hoses for industrial applications that was established in Nichelino, Italy, in 1989. The company mainly produces hoses fabricated from a range of materials including thermoplastic, rubber, and composites with various applications. It also offers hose assemblies, hose reels, and hose protectors for handling or maintaining its portfolio products. The company’s products are used by its clients in Italy’s agriculture, chemical, and automotive sectors.
KOSA Corp, operates as a manufacturer and supplier of industrial control valves, headquartered in Qingpu District, Shanghai, China. The company specializes in the production, research and development, sales, and services of industrial control valves. Its product offerings include a pneumatic diaphragm control valve, electric regulator valve, electronic control valve, self-operated regulating valve, and ultra-small flow regulating valve. These products are generally used for controlling the flow of liquids or gases. It has received the API6D certification from the American Petroleum Institute for its adherence to quality and safety in the production of its products.
ITV GmbH is a German manufacturer and distributor of pneumatic components for industrial applications that was established in 1980 in Bielefeld, North Rhine-Westphalia. The company primarily produces valves of different sizes, materials, and types. It also offers various fittings such as push-in fittings, compression fittings, and brass fittings. Its selection of tubes include fluoropolymer, polyamide, and polyurethane tubes. The company’s products are used mainly by the industrial processing sector, as well as by clients in power generation and municipal infrastructure.
ELAFLEX HIBY GmbH & Co. KG is an ISO 9001-certified manufacturer and supplier of refueling equipment that was established in Hamburg, Germany, in 1923. The company specializes in products and equipment facilitating safe connections for transferring sensitive fluids such as petrol or chemicals. These products include nozzles, hoses, and couplings manufactured to various standards. It also offers breakaways and casting products such as valve bodies, pump housings, and impellers. The company’s products are commonly used in the oil and gas, chemical, and marine industries.
ABASTECIMIENTOS INDUSTRIALES DE VALVULERIA, SL is headquartered in Palleja, Barcelona, and was established in 1995 is a manufacturer and supplier of industrial valves. The company offers an extensive product catalog, including stainless steel ball valves, bottom drain valves rising opening, and Y-strainer and sight glass. It extends services like providing specific designs to assemble for automation and schedules delivery of the products to customers. These products have applications in food processing plants, automotive, and petrochemical industries.
VELO ACCIAI S.R.L. is based in Ezzelini, Treviso, Italy, and is an OHSAS 18001-certified manufacturer of industrial fittings that was established in 1980 as a sister company to VLS Technologies. The company offers stainless steel fittings for regulating or connecting fluid movement networks, as well as catwalks and stairs for height access or positioning. It also offers related stainless steel components for customizing or optimizing fluid network installations. The company’s products are used mainly by clients in the chemical processing, recreational beverages, and petrol industries.
TECVAL is a Spanish manufacturer and distributor of industrial valves and fittings that was established in 1987 in Terrassa, Barcelona. The company’s product lineup includes various valves such as check, ball, and manifold models. It also offers a range of fittings including hose fittings, adapters, and couplings. These are primarily used for fluid handling applications and desalination operations. Aside from its products, the company provides custom design and production services for unique projects, as well as technical support and after-sales services including personnel training and product maintenance.
Shanghai QualityWell Industrial Co., Ltd, established in 2008 and based in Shanghai, China, is a manufacturer and supplier of industrial instrumentation. The company's product range includes bimetal thermometers, tridicator-boiler gauges, remote reading thermometers, digital thermometers, and surface thermometers. These products are used for diverse measurement and monitoring needs. It primarily serves the European, Middle Eastern, and North American markets. Its services include research & development for custom applications, technical support, shipping assistance, and the provision of custom manufacturing.
LUXI GROUP CO., LTD., based in Liaocheng, Shandong, China, is a manufacturer and distributor of chemicals, chemical materials, and fertilizers. Its product range encompasses coal chemicals like methanol and melamine, salt chemicals such as caustic soda and benzyl chloride, and fluorosilicone chemicals like Teflon. The company has garnered numerous awards, including the "China Labor Award," for technological products, and contributions to the chemical industry, making them a player in China's chemical manufacturing landscape.
AFC TECH, established in 1999 and based in Hefei, China, is a manufacturer and supplier of industrial valves. The company specializes in designing and manufacturing industrial valves and fittings, including ball valve, knife gate valve, and plug valve. It also supplies special material valves such as hastelloy and monel, as well as general materials like WCB and LCB. Its products are widely used in the oil & gas, petrochemical, and mining industries. The company sells more than 80% of its products to European, South American, and African countries.
Shie Yu Machine Parts Ind. Co., Ltd. is a Taiwanese manufacturer and supplier of thermoplastic fluid transfer products that was established in 1973. The company’s product portfolio includes nature ball, compact ball, labcock ball, diaphragm, and butterfly valves. These are available in PVC, PP, CPVC, PPG, PVDF and HDPE with matching fittings. It also offers quick repair couplings, gaskets, gauge valves, and flanges. The company’s products are commonly used in chemical processing, oil refining, water treatment, and irrigation operations, as well as by clients in the mining and textiles industries.
Effast, a division of Genuit, established in 1984 and based in Genova, Italy, is a manufacturer and distributor of valves and fittings for industrial applications. Its product range encompasses various materials and fittings like ABS, PE, PP-H, and PVC, as well as ball valves, and actuation adaptor fittings. These products serve industries including water treatment and irrigation. The company has earned certifications such as ISO 9001:2015 for Quality Management, ISO 14001:2015 for Environmental Management, and ISO 45001:2015 for Occupational Health and Safety Management, showcasing its adherence to quality and sustainability in its operations.
Bonomi Industries, established in 2003 in Italy, is a manufacturer and supplier of quality valves and flow control solutions for various industrial applications. The company’s product portfolio includes a wide range of ball valves, butterfly valves, and actuators, catering to sectors such as HVAC, water treatment, oil and gas, and more. Bonomi Industries' relentless efforts toward creativity and customer satisfaction are evident in its technologically advanced solutions designed to meet specific industrial requirements. Tasked with ensuring quality and performance, Bonomi Industries plays a vital role in realizing efficient and effective fluid control systems across different industries.
Invotech Solutions Limited is a manufacturer and distributor of mold shop and plasticizing products that was established in Buckinghamshire, the United Kingdom, in 2005. The company specializes in producing components and equipment for molding and plasticizing operations. These products include shut off nozzles, insulation jackets, and magnetic water filtration solutions. It also offers mold ancillaries such as filters or mixers from brands such as Samixco, Athena, and Smartflow. The company chiefly serves its clients in the consumer electronics, automotive, and industrial packaging sectors.
Bray Commercial Division, Inc, an American company based in Houston, Texas, is a manufacturer and supplier specializing in custom automated valves. The company’s product portfolio includes control ball valves, commercial actuators, and butterfly valves. These products are used in various sectors, including transportation, K-12 and university education, and the entertainment industry. The company offers services including technical support, installation guides with instructions and illustrations to ensure proper installation of its products, and training while being ISO 9001:2015 certified.
Flowserve Corporation, founded in 1790 and headquartered in Irving, Texas, is a manufacturer and supplier specializing in fluid motion and control products. The company's product portfolio includes pumps, seals, valves, energy recovery systems, and decoking systems. These products are utilized across various industries, including power generation, chemical processing, water management, oil and gas, and various general industries. The company also provides customer services, including on-site field services, solutions engineering, system assessments, repairs and maintenance, and training and development.
Wuxi Xinming Auto-control Valves Industry Co., Ltd. established in 2007 and located in Wuxi, Jiangsu, China is a manufacturer and supplier of auto-control valves. The company's product range includes Pneumatic Actuator, Pneumatic Ball Valve, Pneumatic Butterfly Valve, Electric Ball Valve, and Electric Butterfly Valve. These products control fluid flow in various systems. They serve industries that require precise valve operations. The company also provides technical support, offers installation guidance, maintains its products, and ensures customer support for its product line.
Vatac Valves Wenzhou Corp, established in 1987 and headquartered in Wenzhou, Zhejiang, China, is a global manufacturer and supplier of industrial valve solutions. It offers an extensive line of materials, from conventional steel to special alloys such as Monel, Inconel, Hastelloy, and Duplex steel. Its product portfolio comprises ball valves, gate valves, globe valves, butterfly valves, and through conduit gate valves, adhering strictly to international standards like API, ASTM, ANSI, and ISO. The company holds CE certification and ISO 9001:2000 quality management system accreditation and operates within vast manufacturing facilities spanning over 500,000 square feet.
Gebr. Held Hydraulik was established in 1970 and is a manufacturer, distributor, and seller of hydraulics products absed in Tuttlingen, Baden-Wurttemberg, Germany. The company offers various products in the portofolio such as hydraulic hose fittings, aluminium control blocks, and loctite sealant. The products are used in various applications such as water management, chemical manufacture, and food and beverage industries. The company is certified with ISO 9001 standards certification for the management system of the production and sales.
Somas Instrument AB is a Swedish manufacturer and distributor of shut-off as well as control valves that was established in Säffle in 1947. The company mainly produces its items from acid-proof and stainless steel. These include ball, ball segment, and butterfly valves, as well as hydraulic, pneumatic, and electric actuators for providing motion or force to operate the valves. It also offers installation, repair, and maintenance service packages for customers requiring additional support. The company products are primarily used by its clients in the chemical, power generation, pulp and paper, and oil refining industries.
Champion Pneumatic is based in Princeton, Illinois, and is an air compressor manufacturer and distributor originally established as Champion Pneumatic Machinery Co. in 1919 before being acquired by Gardner Denver Inc. in 2023. The company offers various reciprocating and rotary screw air compressors, air dryers, filters, oil/water separators, and lubricants. It also provides additional services, such as engineering and production of custom air compressors for unique use cases. The company's products are mainly used by clients in the automotive, construction, woodworking, and agricultural sectors.
END-Armaturen GmbH & Co. KG is a German manufacturer and supplier of industrial valves as well as fittings established in 1980 and based in Bad Oeynhausen, North-Rhine Westphalia. The company’s product list includes butterfly, knife-gate, and pneumatic valves for controlling the flow of various liquids or gasses. It also offers related accessories such as actuators, flanges, and fittings. Aside from its products, it provides additional engineering, consultation, and installation services to customers needing additional support. The company primarily serves clients in the power generation, water treatment, chemical processing sectors.
Kämpken & Fischer GmbH is a manufacturer of steam injectors, steam coolers, and related equipment established in 1965 and located in Neunkirchen-Seelscheid, Germany. The company offers steam injectors for driving off dissolved oxygen in feed tanks, and steam coolers for rapidly cooling down hot liquid samples. It also offers jet pumps for drawing from water sources using suction pipes. The company chiefly serves clients in the chemical and pharmaceutical industries, as well as in the energy sector.
WIKA Group was founded in 1946 and is headquartered in Klingenberg, Germany. The company serves industries such as food and beverage, power generation, refrigeration, and semiconductor, but is primarily known for medical equipment. The company’s six primary product market segments are Pressure, Temperature, Level, Force, Flow, and Calibration. In addition, the company offers Industrial IoT services including conditional monitoring and alarming, asset tracking, predictive maintenance, and process automation. The company also offers standard calibration, repair, and consultancy services in addition to providing online tools for customer assistance.
Tubes International Sp. z o.o., established in 1993 and headquartered in Poland, is a supplier and distributor specializing in a wide range of industrial hoses, fittings, and related fluid transfer solutions. The company offers an extensive catalog of products, including hoses for various applications, such as hydraulic, chemical, food, and steam hoses, as well as hose fittings and couplings. Its clientele spans multiple industries, including manufacturing, agriculture, automotive, and oil and gas, among others. The company's products find application in various fluid transfer systems, ensuring seamless operations and preventing leakages.
Shanghai Shinjo Pump & Valve Co., Ltd., established in 2010 and headquartered in Shanghai, China, specializes in the manufacturing of industrial valves and pumps such as ball valves, check valves, and gate valves. The company offers an array of products, including magnetic drive pumps, chemical process pumps, electric control valves, pneumatic control valves, pressure-reducing valves, and more. These products are used in diverse sectors, including chemical production, environmental protection, civil construction, and metallurgical engineering.
Ningbo Baodi Plastic Valve Co., Ltd., founded in 1994 and headquartered in Beilun, Ningbo, Zhejiang, China, manufactures plastic valves, pipes, and fittings. The company offers a range of products, including plastic ball valves, diaphragm valves, butterfly valves, check valves, and globe valves, along with various plastic pipes and fittings. These products are constructed from materials like FRPP, PVDF, UPVC, CPVC, and PPH. It holds an ISO9001 quality system certification and possesses over 20 valve patents.
DAB Technology, based in Singapore, has been a supplier and a distributor of vacuum solutions since its incorporation in 1997. Its product range includes palamatic tube lifters, crane systems, dabhandy lifting solutions, and various vacuum components like ejectors, suction cups, and pumps. The company also provides industrial cleaning tools, safety wear, and cleaning equipment. The company is the sole distributor of international brands such as Palamatic, DVP, Hovmand, FBK and more in Asia Pacific, and operates from several branches in Malaysia, Thailand, China, Indonesia, and Vietnam.
VAPO Techniek is a supplier and distributor of automated valves for various media that was established in 1979 in Eindhoven, the Netherlands. The company's product inventory includes a wide range of knife gate, check, ball, and butterfly valves. It also offers pneumatic actuators, conversion sleeves, electric actuators, and switch boxes. These are primarily from the brands BAR, VALPES, SOCLA FRANCE, and CLORIUS CONTROLS. Aside from products, the company provides customization and testing services for customers needing additional support.
VACOM, based in Thuringia, Germany, has been a supplier of vacuum components and measurement solutions since 1992. Its product range includes electrical bushings, optical fiber feedthroughs, ion getter pumps, sight glasses, and vacuum sensors. The company has played a key role in making component cleanliness measurable, developing cleaning processes and standards for vacuum and purity classes, and assisting in designing the guidelines of the German Association for Industrial Parts Cleaning (FiT) for filmic contamination. The company has earned environmental certificates as a permanent member of the Thuringia Sustainability Agreement (NAT).
Teddington-France, established in 1934 and based in Villeneuve La Garenne, France, is a distributor of heating, ventilation, and air conditioning products. The company also offers other products, such as hot air curtains, refrigeration tools, measuring instruments, air purifiers, and air humidifiers. Apart from this, the company makes products for swimming pools, hammams, and spas, such as heat pumps and spa humidifiers. All its products undergo quality tests by abiding by the ISO 9001 quality certifications. The air curtains comply with the European standard, 60335-2-30.
Indumart Inc. is a company established in 1989 and based in Ontario, Canada, as a distributor of measuring and processing control instruments. Its product portfolio has diverse instruments such as transmitters, pressure gauges, temperature sensors, pneumatic controls, and level indicators. The company also distributes flow meters, calibrators, analytical indicators, paperless recorders, and contact pressure gauges. Its extensive portfolio caters to a wide range of industries, including chemicals, petrochemicals, food processing, wastewater treatment, and energy production industries across India, Canada, and the United States.
Castel S.r.l., established in 1961 and based in Italy, is a supplier of refrigeration and air conditioning components. The company's products include thermostatic and electronic expansion valves, solenoid valves, coils, connectors, and valves for refrigeration systems. It is now present in more than 100 countries on five continents. In 2010, the company opened an associated company in China, “Castel Refrigeration (Shanghai) Co., Ltd." By establishing the "Castel Gulf DMCC," a new subsidiary, the company expands and fortifies its current partnerships throughout the Middle East and Africa.
Paani Precisions, a supplier, prioritizes customer satisfaction through efficient services, optimal packaging, and cost-effective rates. Inquiries are encouraged for timely responses and personalized deals. The company is set in its pursuit of excellence in both products and services, known for its responsive customer service. Through ongoing innovation for quality and packaging enhancements, the company ensures timely shipments and reduced delivery issues. With an extensive nationwide network in India, it sources products at competitive rates as scheduled, offering a comprehensive range of solutions at competitive prices.
Pentair is a supplier of sustainable water solutions since 1966 and is based in St. Paul, Minnesota. The company serves the residential community by providing equipment for pools and spas and products for water softening and filtration to run through houses. The business industry benefits from the products that include commercial pool and spa equipment such as chemical controllers, heaters, lightings, and also valves and pumps for water supply as well as for water disposal. The Agricultural products include irrigation equipment and as for the Oil & Gas industry, there is the Biogas upgrading, CO2 Technologies, and much more.
“Welcome to Schwer Fittings – your specialist supplier of Stainless Steel pipe connection technology. Schwer branded production includes Couplings, Compression Fittings, Valves, Pipes, Hoses and Hose end Fittings. The high quality products are mainly used in gas and fluid hydraulic applications. Custom made products are developed in close co-operation with customers, and can be produced in small or large quantities. All items pass through a state of the art Quality Control centre, where they are carefully checked against technical drawings. Production takes place in four European locations, each specializing in a particular product range.”
UCT Fluid Solutions, founded in the United States in 2017, is a distributor of industrial and electronic products. It specializes in flow control and fluid management for high-purity and process control applications by developing components and custom solutions for hydrogen-powered vehicles, electrolyzers, filling stations, and more. The company also offers services like design for manufacturability, prototyping, advanced flow control solutions, and high-precision manufacturing to companies in the oil, gas, and energy industries.
Holmatro, Inc., founded in the Netherlands in 1967, is a global supplier of high-pressure hydraulic rescue tools. The company has manufacturing facilities in the United States and the Netherlands. It serves customers worldwide, with divisions located in the Netherlands, USA, and China. Its products are predominantly used in rescue, special tactics, and industrial applications, ensuring effective and safe tools under all circumstances. It has centralized its research & development and product management teams in the Netherlands to ensure superior products. Its state-of-the-art manufacturing facilities are located in the Netherlands and in the USA.
Alpha Technologies, established in 1976 and based in Bione, Brescia, Italy, is an ISO 9001:2015 certified manufacturer and supplier of fluid power products. The company's product range includes fittings and connectors, automatic couplings, automation equipment, compressed air networks, and fluid valves. These products are vital for operations involving fluids, compressed air, inert gases, and vacuum control. It serves industries such as manufacturing, pneumatics, hydraulics, and industrial automation. In addition to its products, the company offers services like BIM, My Aignep, Aignep Scan, and Infinity Air Planner.
Valmet is a Finnish developer and supplier of process technology products for the pulp, paper, and energy industries that was established in Keilaniemi, Espoo, in 2013. The company offers production lines for paper products such as board or tissue, power plants for bioenergy production, and pulp mills for producing pulp from raw materials. It also provides flow control accessories for its products such as valves and pumps. The company's products are used mainly by clients in the pulp and paper, renewable energy, and wastewater processing industries.
Maximator GmbH, established in 1885 and headquartered in Nordhausen, Germany, is a supplier of high-pressure technology, testing technology, hydraulics, pneumatics as well as hydrogen technology. The company offers a range of products, from fittings to modular gas compressor systems. It also offers customer-oriented services such as burst pressure, autofrettage of components, and a large number of inspections on CNG. Its pumps are rugged, rebuildable, and can tolerate all installation positions. The company has TÜV certification for its valves, fittings, and tubing, serving diverse industries, including automotive, energy, chemical, and semiconductor industries.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | DynaQuip Controls |
1.3%
|
| 2 | WITT Gas Controls LP |
1.2%
|
| 3 | KZValve, Inc. |
1.2%
|
| 4 | NTGD Valve (China) Co. LTD |
1.1%
|
| 5 | Valve Solutions, Inc. |
1.1%
|
| 6 | Owlstone Inc. |
1.1%
|
| 7 | John Guest U.S.A., Inc. |
1.1%
|
| 8 | Beswick Engineering Co., Inc. |
1.1%
|
| 9 | Swiss Jewel Co. |
1.0%
|
| 10 | Cla-Val Company |
1.0%
|
Derivation Method
The ranking is calculated based on the click share within the ball valve page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
50 | 22.8% |
|
Germany
|
40 | 18.3% |
|
China
|
35 | 16.0% |
|
Italy
|
34 | 15.5% |
|
Spain
|
7 | 3.2% |
|
Taiwan
|
7 | 3.2% |
|
Japan
|
5 | 2.3% |
|
France
|
5 | 2.3% |
|
India
|
4 | 1.8% |
|
Canada
|
4 | 1.8% |
|
Turkey
|
4 | 1.8% |
|
Switzerland
|
4 | 1.8% |
|
United Kingdom
|
3 | 1.4% |
|
Austria
|
3 | 1.4% |
|
Netherlands
|
2 | 0.9% |
|
Denmark
|
2 | 0.9% |
|
Poland
|
2 | 0.9% |
|
Republic of Korea
|
1 | 0.5% |
|
Norway
|
1 | 0.5% |
|
Russia
|
1 | 0.5% |
|
Sweden
|
1 | 0.5% |
|
Lithuania
|
1 | 0.5% |
|
Belgium
|
1 | 0.5% |
|
Singapore
|
1 | 0.5% |
Slovenia
|
1 | 0.5% |
Consus Co., Ltd.
50+ people viewing
Last viewed: 5 hours ago
■Features ・One-piece body, reduced port. - Lock handle (L handle) and butterfly handle (T handle) are available as options. - The wetted parts are...
Consus Co., Ltd.
40+ people viewing
Last viewed: 2 hours ago
■Features ・This is an air cylinder driven valve with CSS actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limi...
Consus Co., Ltd.
30+ people viewing
Last viewed: 1 hour ago
■Features ・This is an air cylinder driven valve with an actuator for CSH-SS. ・The operating mode is single-acting or double-acting. - Solenoid va...
Consus Co., Ltd.
30+ people viewing
Last viewed: 2 hours ago
■Features ・CSM's air cylinder driven valve with actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limit switche...
Consus Co., Ltd.
30+ people viewing
Last viewed: 5 hours ago
■Features ・CSJS's air cylinder driven valve with actuator. ・The operating mode is single-acting or double-acting. - Solenoid valves, limit switch...
Consus Co., Ltd.
30+ people viewing
Last viewed: 2 hours ago
■Features - Split type sanitary ball valve CSSD's air cylinder driven valve with actuator. ・The operating mode is single-acting or double-acting. ...
Consus Co., Ltd.
40+ people viewing
Last viewed: 1 hour ago
■Features - Ball valve with electric actuator for NW flange connection for vacuum piping. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterpr...
Consus Co., Ltd.
30+ people viewing
Last viewed: 3 hours ago
■Features - Sanitary ball valve with ferrule connection and electric actuator. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustpro...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features - Ball valve with screw connection electric actuator. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof standard: IP...
Consus Co., Ltd.
30+ people viewing
Last viewed: 3 hours ago
■Features - Sanitary mini ball valve with ferrule connection and electric actuator. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/du...
Consus Co., Ltd.
30+ people viewing
Last viewed: 5 hours ago
■Features - Butt welding type ball valve with electric actuator. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof standard: I...
Consus Co., Ltd.
50+ people viewing
Last viewed: 5 hours ago
■Features - Threaded ball valve compatible with NPT (American tapered pipe thread standard). ・One-piece body, reduced port. - The wetted parts are...
Consus Co., Ltd.
40+ people viewing
Last viewed: 3 hours ago
■Features ・Electric actuator specification for split type sanitary ball valve CSSD. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/d...
Consus Co., Ltd.
30+ people viewing
Last viewed: 3 hours ago
■Features - Socket welding type ball valve with electric actuator. ・Single phase AC 100V/200V 50HZ/60HZ DC 12/24V ・Waterproof/dustproof standard:...
Consus Co., Ltd.
50+ people viewing
Last viewed: 5 hours ago
■Features ・One-piece body, reduced port. ・One side has a tapered male thread (R) and the other side has a tapered female thread (Rc), simplifying...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features - Three-piece body, full port structure. -Standard lock handle ensures safety. - Due to the bolt-tightening structure, it can be easily d...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features - Three-piece body, full port structure, NW flange ball valve for vacuum piping. - Ideal for semiconductor-related and other equipment, v...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features ・One-piece body, reduced port. - Tapered thread on the inlet side (Rc) and straight thread on the outlet side (G), making it ideal for p...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features - Three-piece body, full port structure, NW flange ball valve for vacuum piping. - Ideal for semiconductor-related and other equipment, v...
Consus Co., Ltd.
100+ people viewing
Last viewed: 5 hours ago
■Features ・Two-piece body, full port. - The main body material is stainless steel 304 (handle cover green), which has excellent cost performance a...
Consus Co., Ltd.
40+ people viewing
Last viewed: 1 hour ago
■Features - Three-piece body, full port structure. -Standard lock handle ensures safety. -Connection shape can be changed by replacing the end cap....
Consus Co., Ltd.
40+ people viewing
Last viewed: 18 hours ago
■Features ・Two-piece body, full port. - Lock handle (L handle) and butterfly handle (T handle) are available as options. - The main body material ...
Consus Co., Ltd.
30+ people viewing
Last viewed: 5 hours ago
■Features - Three-piece body, full port structure, butt welding type. -Connection shape can be changed by replacing the end cap. -Standard lock han...
Consus Co., Ltd.
30+ people viewing
Last viewed: 6 hours ago
■Features ・Two-piece body, full port. - The main body material is stainless steel 316L (handle cover red) and the seat part is made of NEW PTFE, s...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features ・Three-piece body, full port structure, socket welding type. -Standard lock handle ensures safety. -Connection shape can be changed by r...
Consus Co., Ltd.
30+ people viewing
Last viewed: 18 hours ago
■Features - Threaded ball valve compatible with NPT (American tapered pipe thread standard). ・Two-piece body, full port. - The wetted parts are ma...
Consus Co., Ltd.
40+ people viewing
Last viewed: 5 hours ago
■Features ・Full port structure with low pressure loss. - A SUS handle is available as an option for the standard FC handle. ・The key can be locke...
Consus Co., Ltd.
70+ people viewing
Last viewed: 5 hours ago
■Features ・Two-piece body, full port. ・The key can be locked at two points: fully closed and fully open. - Comes with a handle fixing function. -...
Consus Co., Ltd.
30+ people viewing
Last viewed: 5 hours ago
■Features - A type with an integrated arm lock coupling adapter on the exit side. ・Full port structure with low pressure loss. - A SUS handle is a...
