114 Machining Center Manufacturers in 2024
This section provides an overview for machining centers as well as their applications and principles. Also, please take a look at the list of 114 machining center manufacturers and their company rankings. Here are the top-ranked machining center companies as of November, 2024: 1.Comau, 2.TRAK Machine Tools - Southwestern Industries, 3.ROMI S.A..
Table of Contents
What Is a Machining Center?
A machining center is a numerically controlled (NC) machine tool that performs various types of machining without the need to change the workpiece.
In addition to the main spindle, which is used to mount tools and provide rotational motion, the machining center consists of an ATC (Automatic Tool Changer) and an index table for fixing the workpiece at various angles.
Uses of Machining Centers
Machining centers are used to process metal, plastic, glass, and other materials, including molds, which are indispensable for molding. Since various tools can be changed automatically, machining with tools such as milling, end milling, drilling, boring, and tapping can be performed in a single process.
In terms of machining freedom, the addition of two rotational axes to the conventional three axes of length, width, and height enables machining with five degrees of freedom. This eliminates the need to lift the workpiece and allows for the production of highly accurate parts.
Principle of Machining Centers
Machining centers are classified into three types: vertical machining centers, horizontal machining centers, and double-column machining centers.
Vertical machining centers have a vertical spindle, and the workpiece is machined from above. Vertical machining centers are compact and the most widely used type. During machining, cutting chips remain on the workpiece and tend to damage the tool's cutting edges. Measures such as adjusting the tool rotation speed and the amount of cutting oil are necessary to facilitate chip removal.
In the horizontal type, the spindle is horizontal to the ground, and the workpiece is machined from the side. Cutting debris falls to the bottom of the workpiece for easy discharge. Also, a pallet changer that automatically transfers parts can be installed, allowing parts to be machined continuously without the use of human hands, making it suitable for mass production.
The gate type is shaped like a gate when viewed from the front and is suitable for processing large products because the table on which the workpiece is placed is wide and long.
List of 114 Machining Center Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- Brazil
- Canada
- China
- Germany
- Italy
- Japan
- Republic of Korea
- Spain
- Sweden
- Switzerland
- Taiwan
- Turkey
-
-
-
Hwacheon Machinery America Inc
Machining Centers
Manufacturer Overview
Hwacheon Machinery America Inc, founded in Korea, is a manufacturer of machines, automobile parts, and metal 3D printers. The company's product portfolio includes an extensive range of machines, including industrial automation equipment, CNC machinery, specialized manufacturing units, high-quality automobile components and parts, and advanced metal 3D printers, offering high-precision and reliable solutions for additive manufacturing in industries such as aerospace, automotive, and healthcare. It also designs and manufactures tailor-made machines and components to meet specific client requirements.
-
-
-
-
-
Takumi USA
Box Way CNC Machining Centers
Manufacturer Overview
Takumi USA, established in 1988 and headquartered in Indianapolis, Indiana, United States, is a machining tools manufacturer and supplier. The company's products include 5-axis high-speed machining and surface finishing centers, double-column CNC machining centers, and 3-axis box-way machining centers. It also offers industry-standard CNC controls through the Fanuc 31i-MB control center series with optional features. Its after-sales services include financing and operator training. The new Takumi Technology Center and Showroom was built in Indianapolis to serve the United States market when the company was acquired by Hurco Companies in 2015.
-
-
-
-
-
-
-
Camozzi Machine Tools
FCR - Machining Center
Manufacturer Overview
Camozzi Machine Tools is a manufacturer of advanced machine tools established in the 19th century with headquarters in Brescia, Italy, and Rockford, USA. It produces gantry and robotic 3D printers, platforms for composite parts manufacturing, and vertical machining solutions. It also manufactures horizontal machining solutions and custom-made solutions for unique manufacturing processes. The products serve the additive manufacturing, aerospace, general mechanical engineering, defense, energy, and rail industries. It has passed ISO 9001:2015 and EN9100:2018 certifications of the quality system.
-
-
-
-
-
Cameron Micro Drill Presses
CNC Micro Machining Center-TC
Manufacturer Overview
Cameron Micro Drill Press, established in 1964, and based in California, US, is a manufacturer of micro drill presses. The company designs and builds products like the model 214 table drill press, model 704 drill press, and model 904 mill mount drill press. These products are used in avionics, hospitals, jewelry making, and clock repair, and are distributed across Australia, Jordan, South Africa, and India. The company has also developed an automated line of CNC equipment.
-
-
-
-
-
Lagun Engineering
MACHINING CENTERS
Manufacturer Overview
Lagun Engineering is a US-based manufacturer of industrial machine tools founded in 1968 and headquartered in Harbor City, California. The company’s main product line includes manual and CNC vertical mills, horizontal mills, heavy-duty bed mills, and heavy-duty lathes. It also offers customized machines and a complete line of accessories. The company has two business units, Republic Lagun Machine Tool Co. and Republic Lagun CNC. It holds UL, SBA, GSA, and AMT certifications, serving diverse industries, including power generation, aerospace, renewable energy, railways, and construction.
-
-
-
-
-
Flex Machine Tools
Vertical Machining CenterS
Manufacturer Overview
Flex Machine Tools is a US-based manufacturer of machine tools and accessories founded in 1984 and headquartered in Wapakoneta, Ohio. The company specializes in tapping applications, ergonomic solutions, large-bed CNC machining, and waterjet systems. It offers long-bed vertical machining centers, beam line CC, waterjet, die-grinding arms, and torque reaction arms. The company has obtained ISO 9001:2008 quality certification and serves over 20,000 customers worldwide. It caters to the aerospace, automotive, construction, electronics, and other industrial sectors.
-
-
-
-
-
Kent CNC
CNC Vertical Machining Centers
Manufacturer Overview
Kent CNC, founded in 1979 with headquarters in Tustin, California, USA, is a manufacturer of CNC equipment and machines. The company's product line includes vertical machining centers, horizontal machining centers, vertical turning centers, and combination horizontal and vertical machining centers. The products are highly customizable and available with extra functionality and features. The company offers standard in-stock machinery as well as customized machines per order. The company serves various industries, including marine, aerospace, agriculture, automotive, and military.
-
-
-
-
-
Haas Automation, Inc.
5-Axis Universal Machining Centers
Manufacturer Overview
Haas Automation, Inc., established in 1983 and based in California, USA, is a manufacturer of CNC vertical machining centers, horizontal machining centers, CNC lathes and rotary products. The company's machines are categorized in vertical and horizontal mills, lathes, rotaries & indexers, multi-axis solutions and automation systems. It builds specialty machines such as 5-axis machining centers, mold making machining centers, toolroom machines, and gantry routers. It also provides operating manuals, procedures, troubleshooting guides and toolkits for its machines. The company's products and accessories comply with the ISO 9001:2015 and European Machinery Directive(CE) regulations.
-
-
-
-
-
KAAST Machine Tools, Inc.
Horizontal vs. Vertical Machining Centers
Manufacturer Overview
KAAST Machine Tools, Inc., established in 2009, is a manufacturer of fabrication machines, ironworkers, plate & profile rollers, band saws, and chip-making equipment such as grinders, mills, presses, and lathes used in automotive, construction, defense, aerospace, and metal working industries. The Aldan, PA company offers drilling, turning, milling & grinding, drilling, and after-sales services, including consulting & planning, installation, financing & leasing, operator training, and fabricating. The company has a warehouse in Philadelphia with 24-hour delivery in the area and 48-hour delivery in other areas.
-
-
-
-
-
JINGDIAO NORTH AMERICA, INC
CNC Machining Centers
Manufacturer Overview
JINGDIAO NORTH AMERICA, INC. is a manufacturer of CNC machine tools founded in 1994 and headquartered in Illinois, USA. The company specializes in the production of 3- and 5-axis high-precision, high-speed machining centers, mill-grind, mill-turn, and graphite mills. These products are utilized in the mold part milling and polishing, precision hole grinding, die casting, and microhole drilling on metals and special materials. The company holds ISO 9001:2015 and ISO 14001:2015 certifications, with an annual output of machine tools of over 12,000 sets. It caters to the automotive, aerospace, medical, electronics, and mold-making industries.
-
-
-
-
Manufacturer Overview
Hurco, established in 1968 and headquartered in Indianapolis, Indiana, USA, is a manufacturer of advanced computer numerical control (CNC) machine tools. The company’s main products encompass a diverse range of vertical and horizontal machining centers, CNC lathes, and mill-turn solutions, catering to precision machining in industries like aerospace, automotive, and medical. Hurco empowers manufacturers with modern CNC technology and software, enhancing production efficiency and accuracy. As a manufacturer, they play a pivotal role in shaping modern manufacturing processes and contributing to the global industrial landscape with their quality machining solutions.
-
-
-
-
-
Elumatec North America, Inc.
MACHINING CENTRES
Manufacturer Overview
Elumatec North America, Inc. is a manufacturer and supplier of advanced machinery and solutions for aluminum and PVC profile processing. Established in 1928, the company is headquartered in Mühlacker, Germany. The company's main activities encompass designing, manufacturing, and distributing precision saws, machining centers, and software solutions. Elumatec North America specializes in enhancing profile processing operations for the fenestration and facade industries. Its main services include comprehensive support, ensuring optimal performance, efficiency, and accuracy. The company serves businesses in the construction and fenestration sectors, delivering cutting-edge products that elevate manufacturing capabilities.
-
-
-
-
-
JTEKT Toyoda Americas Corp.
Machining Centers
Manufacturer Overview
JTEKT Toyoda Americas Corp., established in 1941, and headquartered in Arlington Heights, Illinois, USA, is a manufacturer that specializes in producing machine tools and machining centers. Their product range includes CNC cylindrical grinders, horizontal and vertical machining centers, and grinding machines. These products cater to the automotive, aerospace, medical, energy, and general manufacturing sectors. JTEKT Toyoda is devoted to excellence and holds ISO 9001 and ISO 14001 certifications, ensuring precision, and efficiency in machining operations for their customers.
-
-
-
-
-
Revolution Machine Tools
PIPE SPOOL MASTER TGB 14 CNC
Company Overview
Revolution Machine Tools (RMT), established in 2015 and headquartered in North Salt Lake, Utah, is a manufacturer and distributor of sheet metal fabrication machinery. Some of the company's products are fiber lasers, press brakes, plate rolls, as well as ironworkers and angle rolls. These precise machines are utilized for several processes, such as cutting, bending, rolling, as well as punching, shearing, and notching metal sheets, plates, tubes, and profiles of diverse industries, such as automotive, aerospace, and manufacturing.
-
-
-
-
-
TRAK Machine Tools - Southwestern Industries
Toolroom Machining Centers
Company Overview
TRAK Machine Tools - Southwestern Industries, Inc., established in 1962 and headquartered in Fort Worth, Texas, USA, is a manufacturer and supplier of CNC machine tools. The company's product range includes CNC bed mills, knee mills, vertical machining centers, 3D printers, and additive manufacturing systems. It serves diverse industries like aerospace, defense, medical, automotive, and industrial, offering many services including machine tool sales, repair, 3D printing solutions, and additive manufacturing training. Accredited by the National Machine Tool Builders Association (NMTBA) and the ASME, the company draws on decades of experience in the machine tool industries.
-
-
-
-
-
-
-
AES GROUP
CONSOLE TYPE
Manufacturer Overview
AES Group, established in 1989 and headquartered in Bursa, Turkey, is a manufacturer in the industrial electronics and automation sector. The company specializes in industrial automation systems and microprocessor electronic circuits. Its products include drilling machines, industrial panel saws, edge banding machines, and various systems such as Raptor Ultra, Extreme Ultra, and the VEGA series. It delivers automation solutions in many sectors, such as textiles, food, and wood processing. The company’s after-sales support offers remote and on-site services tailored to client needs in panel processing, solid wood and plastic, and non-metal material applications.
-
-
-
-
-
MECAL MACHINERY S.r.l
MACHINING CENTERS
Manufacturer Overview
Mecal Machinery S.r.l., established in 1978 and headquartered in Pavia, Italy, is a manufacturer of machines and systems for processing aluminum, PVC, and light alloys. The company offers high-tech products for aluminum processing, including machining centers, cutting machines, and handling equipment. It emphasizes PVC profile processing, demonstrating extensive industry experience and technological prowess. It operates an integrated production process, internally handling research and development, design, and assembly. The company's products are characterized by expert design, customized solutions, and flexibility to meet diverse industry requirements, supported by an in-house design department.
-
-
-
-
-
Emmegi
CNC MACHINING CENTRES
Manufacturer Overview
Emmegi, in Limidi di Soliera, Modena, Italy, has been a manufacturer and designer of systems for machining profiles in aluminum, light alloy, PVC, and steel since 1970. The company’s product categories are CNC machining centers, double-head cutting-off machines, CNC cutting centers, complementary machines, and single-head cutting-off machines. It also makes complementary machines, professional exhausters, manual assembly benches, professional trolleys, and software in the fabrication, processing, and manufacturing industries. The establishment has hubs in Brazil, France, the UK, Turkey, and Asia.
-
-
-
-
-
ACE MACHINE TOOLS CO.,LTD
Radia Universal Machining Center
Manufacturer Overview
ACE MACHINE TOOLS CO. LTD is a manufacturer of machine tools and accessories that was established in 1983 in Suzhou, China. The company produces standard as well as specialized metal forming or auto repair machines and power tools. These include universal lathes, hydraulic press brakes, and CNC machine centers. It also offers automated plasma cutting machines and handheld surface grinders. Aside from its products, the company offers OEM services for its clients in the aerospace, metalworking, and industrial manufacturing sectors.
-
-
-
-
-
Rittal GmbH & Co. KG
Laser machining
Manufacturer Overview
Rittal is a German manufacturer of electrical enclosures and related products that was established in Herborn, Hesse in 1961 as part of the Friedhelm Loh Group. The company primarily produces standard and modular enclosures for various electronic and electrical components, such as servers, switchgear, or control panels. It also offers automation, power distribution, IT infrastructure, and climate control systems for use in industrial facilities. Rittal products are mainly used by clients in the telecommunications, energy production, automotive, maritime, and logistics sectors.
-
-
-
-
-
Sinico Service Srl
Automatic numerical control custom cutting end working machine
Manufacturer Overview
Sinico Service Srl, founded in 1962 and headquartered in Montebello Vicentino, Italy, is a manufacturer of cutting and machining products. The company specializes in the design and manufacturing of cut-off and end-finishing machines, suitable for producing medium and large series of metal parts from tubes, bars and coils. The end-finishing process is commonly performed with chip-forming machine tools, such as chamfering, trimming and centring. The company provides brochures for each of its machines, as well as provides remote technical assistance for the diagnosis of the problem, followed by the after-sales service.
-
-
-
-
-
EMISSA S.A.
Flexible machining center for bars machining
Manufacturer Overview
Emissa S.A., established in 1937 and headquartered in Le Locle, Switzerland, is a designer and manufacturer of industrial machinery. Its products include boring machines, tapping machines with lead screws, and an index table with six indexing possibilities. Its services include feasibility studies as well as turning, gear hobbing, and laser engraving. Its products are used for watch production and the manufacture of miniature mechanical components. It also offers custom machinery, from design and engineering to final product delivery.
-
-
-
-
-
MODIG Machine Tool US Inc.
HORIZONTAL MACHINING CENTERS
Manufacturer Overview
MODIG Machine Tool US Inc. is a Wichita, Kansas-based U.S. manufacturer of machining centers and automation products that was established in 2016 as a subsidiary of Sweden’s MODIG Machine Tool AB. The company’s product lineup includes rigid multitasking, flexible, and standard vertical machining centers, as well as various horizontal machining centers such as extrusion hogging and bar hogging models. It also offers inverted machine centers and machine tool automation solutions including robotic machine loaders and bar feeders. The company’s products are used primarily by clients in the construction, energy, automotive, and heavy equipment industries.
-
-
-
-
-
Paolino Bacci S.r.l.
MOBILE-UPRIGHTS
Manufacturer Overview
Paolino Bacci, established in 1918 and headquartered in Cascina, Toscana, Italy, is a woodworking machinery and CNC machining center developer and manufacturer. Its products include conventional lathes, advanced material processing machines, and multi-axis CNC working centers. The company produces machines to-order for specific applications, such as chair, table, and door manufacturing, and the production of elements in plastic, aluminum, and composite materials. Its services include operator training, maintenance programs, and supplying spare parts.
-
-
-
-
-
KAO FONNG MACHINERY CO., LTD
Double Column Machining Center
Manufacturer Overview
Kao Fong Machinery Co. Ltd. (KAFO), founded in 1968 and headquartered in Taichung City, Taiwan, is a mold press machinery and machining center developer, manufacturer, and supplier. The company's products include high-speed, double-column machining centers, gantry double-column machining centers, and drilling-tapping centers. It also provides complete turnkey project planning to deliver automated processing equipment and processing lines. The project planning includes the design and manufacture of customized automated production lines, carrying out automation processes, and control modifications. The company's global sales and service locations provide onsite installations, equipment start-ups, and technical support.
-
-
-
-
Manufacturer Overview
AZ S.p.A., established in 1958 and headquartered in Montorso Vicentino, Italy, is a manufacturer of grinding equipment and systems. The company's products include crankshaft, landing gear, and engine rebuilding grinding machines. It also offers a range of universal grinding machines, including CNC machines, for heavy-duty industrial applications. These products are used for boring and grinding combustion engine blocks, engine heads, and shaping. Its machines are designed for specific applications used in sectors that include railway construction, electric generator motor construction, and automotive manufacturing.
-
-
-
-
-
SSB-Maschinenbau GmbH
Horizontal machining centers
Manufacturer Overview
SSB Maschinenbau GmbH, established in 1950 and headquartered in Westphalia, Germany, is a manufacturer of customized machining centers. The company's products include vertical spinning machines, rotary forging presses, and rim machining centers. Its vertical spinning machines are used for precise metal forming in the automotive and aerospace industries, while rotary forging presses are essential for producing high-strength components in the agriculture and steel construction sectors. The company's remote service addresses machine problems without needing on-site specialist personnel and conducts machine inspections to organize necessary spare parts for swift repairs. It also provides process development, CNC programming, and maintenance services.
-
-
-
-
-
JINAN YUEFENG MACHINERY CO.,LTD
CNC Four Axis High Speed Maching Center
Manufacturer Overview
Jinan Yuefeng Machinery Co. Ltd., founded in 1993 and headquartered in Shanghai, China, is a manufacturer and supplier of PVC and aluminum win-door equipment, curtain wall equipment, and insulating glass equipment. The company's products include water slot router machines, insulating glass washing machines, and double mitre saws. Its services include custom machinery design and manufacturing, installation, and operator training. It also provides spare parts and consumables as part of its after-sales services. It serves industries that include construction, warehousing, and window and door manufacturers.
-
-
-
-
-
Shibaura Machine
Double Column type Machining Center
Manufacturer Overview
Initially established in 1938, Shibaura Machine has three-quarters of a century providing Comprehensive technology and supporting the “monozukuri” of the world. With the technical and development capabilities of the Shibaura Machine Group, various machines and services create rich value and contribute to the creation of an industrial base. Working on the eight technical platforms, they develop and manufacture a wide range of production devices that meet the needs of the times, delivering the best solutions by combining our accumulated excellent know-how and the latest technology. Shibaura Machine uses its knowledge of modern global standards of advanced technology to support Japan and the world.
-
-
-
-
-
RALC ITALIA Srl
Machining centres
Manufacturer Overview
Ralc Italia SRL, founded in 1991 and headquartered in San Giorgio di Nogaro, Italy, is a manufacturer of special machines for mechanical machining. The company's products include pipe machining centers, wire processing lines, and CNC flanging machines. It also offers industry 4.0 applications and smart factory solutions that include integrated monitoring and control systems for managing multiple production systems, managing external material suppliers, and reporting on production batches and stock. The company's services include operator training, remote technical support, and the supply of spare parts.
-
-
-
-
-
Beijing No.1 Machine Tool Imp. & Exp. Corp. Ltd.
Precision vertical machining center model
Manufacturer Overview
Beijing No. 1 Machine Tool Imp. & Exp. Corporation Ltd., established in 1949 and headquartered in Beijing, China, is a manufacturer and supplier of milling machines, centers, and accessories. The company's products include the T1 High Precision CNC Vertical Turning Series, CNC floor-type boring and milling series machines, and the XKHFive-axis Turbine Blade Machining Center series. It also offers custom design and production of large-size cylindrical CNC grinding machines to meet client requirements. These large-scale milling centers are used in industries including automotive, marine, and mining.
-
-
-
-
-
Comau
Machining Center
Manufacturer Overview
Conzorio Macchine Utensili (Comau), established in 1970, is a manufacturer in Grugliasco, Italy, specializing in the production of industry 4.0-enabled systems, products, and services. The company offers joining, assembly, and machining solutions for traditional and electric vehicles, and robotized manufacturing systems, including collaborative and wearable robots. The offering also extends to project management and consultancy, IoT services, and maintenance and training for vehicle manufacturing, heavy industry, railway, renewable energy, and various general industries. The company owns its international network in 13 countries.
-
-
-
-
-
AWEA MECHANTRONIC CO., LTD
5-Face Bridge Type Machining Center
Manufacturer Overview
AWEA MECHANTRONIC CO., LTD., established in 1986, is a manufacturer of precision CNC machine tools located in Taiwan. The company offers various CNC machining solutions, including Vertical Machining Centers (VMC), Horizontal Machining Centers (HMC), 5-Axis Machining Centers, Bridge Type Machining Centers, and Gantry Type Machining Centers. These machines perform accurate machining operations, ensuring that parts and components meet tight tolerances. The company's products are in various industries, including automotive, general manufacturing, power generation, heavy machinery, and mold making.
-
-
-
-
-
ETXETAR
XFLEX TWIN + Machining Centers
Manufacturer Overview
Etxetar, a part of the INZU group, is an ISO-certified manufacturer and supplier of machine tools to the automobile industry based in Elgoibar, Spain. The company specializes in developing equipment for high-precision machining processes to custom specifications. Etxetar offers various products including Turnkey Lines, Laser Hardening, and Automation solutions for machining and assembly applications adapted to fit the custom layout. The company also offers retooling and mechanical & electrical refurbishing services to other machine tool manufacturers with a focus on CNC machining centers.
-
-
-
-
-
BieMmePi
MINI-CENTERS
Manufacturer Overview
Biemmepi Sistemi S.r.l. (BieMmePi), founded in 1981, is an Italian manufacturer based in Brembate di Sopra, Bergamo, specializing in diverse machinery. The company's portfolio includes computerized numerical control (CNC) milling and mini engraving machines for industrial signmaking, completed with service components like cooling systems and vacuum pumps. These machines are adept at handling various materials, such as plastics, wood, and fiberglass. Its product lineup extends to milling machines customized for the eyewear industry, specifically designed for cutting lenses, masks, and frames.
-
-
-
-
-
GROB-WERKE GmbH & Co. KG
Universal machining centers
Manufacturer Overview
Grob-Werke GmbH & Co. KG, founded in 1926 and headquartered in Mindelheim, Bayern, Germany, is a manufacturing systems and machine tools developer, manufacturer, and supplier. The company offers consulting, development, and production of custom universal machining centers for the milling and mill-turn machining of parts from various materials, custom assembled machines and assembly lines, and e-mobility solutions, including turnkey assembly systems for electric motors, battery cells, and fuel cells. It owns and operates a number of production facilities in Europe, the United States, and Brazil. The company's services include supply of spare parts, training programs, and repairs.
-
-
-
-
-
Hermle AG
Machining centers
Manufacturer Overview
Hermle AG, founded in 1938 and headquartered in Gosheim, Germany, is a developer and manufacturer of machining technology and automation solutions. The company's main products include a range of bespoke machining centers, each with a comprehensive set of customizable options and automation systems for industrial machining, such as pallet changers, handling systems, and robot systems. It has also launched the development, production, and ongoing support of IoT and Industry 4.0 digital production, operation, and service modules for partner production clients.
-
-
-
-
-
Howa Machinery, Ltd
Machining centers
Manufacturer Overview
Howa Machinery Ltd, established in 1907 and based in Aichi, Japan, is a manufacturer of machine tools and other equipment. The company engages in the manufacturing and sale of equipment for diverse markets, with a primary emphasis on machine tools. This product line includes transfer machines, flexible transfer lines (FTL), and flexible manufacturing systems (FMS). The company also offers pneumatic and hydraulic equipment, electronic machines tailored for the IT sector, and firearms. The company's Type 64 rifle and Type 89 rifle have been adopted as the official equipment by the Japan Defense Agency (Ministry of Defense).
-
-
-
-
-
ALZMETALL GmbH & Co. KG
Machining Centers GS-SERIES
Manufacturer Overview
ALZMETALL GmbH & Co. KG, founded in 1945 and headquartered in Bayern, Germany, is a manufacturer of industrial machinery, specializing in drilling, milling, and casting technology. Its product line includes a range of metalworking machinery, such as drills, milling cutters, cutting tools, flow drilling, and chipless drilling machines. It also provides casting tools and services, tool resharpening, as well as repair and maintenance. The company is ISO 9001:2018 certified and serves to diverse industries, including aerospace, automotive, tool and mold making, and manufacturing.
-
-
-
-
-
Lonza Capsules & Health Ingredients
4-axis machining centers H
Manufacturer Overview
Lonza Capsules & Health Ingredients was established in 1960 and headquartered in New Jersey, United States of America, as a manufacturer and supplier of capsules and dosage form solutions. It produces sprinkle capsules, inhalation capsules, HPMC, gelatin, and alternate polymer capsules. It also manufactures titanium dioxide-free food supplement capsules, empty gelatin capsules, and dietary supplements. The industries that benefit from these products are pharmaceutical and nutraceutical industries. The company's products have been distributed to more than 5,000 customers in over 100 countries.
-
-
-
-
-
Sodick Co., Ltd
Machining Center
Manufacturer Overview
Sodick Co., Ltd, founded in 1976 and headquartered in Yokohama, Japan, is a manufacturer and supplier of machine tools, injection molding machines, food machines, and LED products. The company's product portfolio includes nano-level precision machines, magnesium alloy injection machines, noodle steam sterilizers, LED products, and electronic components. These products are utilized in various industries, including food processing, electronics, LED and lighting, manufacturing and machining, and the plastics and injection molding industry. The company has development, production, and service locations in different countries, including the United States, China, Thailand, India, and Singapore.
-
-
-
-
-
TSUBAKIMOTO CHAIN
Machining Centers
Manufacturer Overview
Tsubakimoto Chain Co. is a Japan-based manufacturer of power transmission and roller chain products, founded in 1917, and headquartered in Osaka. Their power transmission products include drive chains, conveyor chains, automotive timing drives, sprockets, hose, and cable carrier systems, as well as timing belts, reducers, locking devices, shaft couplings, and clutches. Their products are for power transmission, material handling, factory automation, and physical distribution systems. Tsubakimoto Chain is certified as an Eco-First Company by the Ministry of the Environment.
-
-
-
-
-
DMG MORI CO., LTD.
Vertical Machining Centers
Manufacturer Overview
DMG MORI is based in Japan since 1948 as a manufacturer of machine tools and precision machining systems. Their product portfolio includes CNC lathes, milling machines, advanced multi-axis machining centers, and additive manufacturing systems. The company caters to diverse industries such as automotive, aerospace, energy, medical, and general engineering. In the automotive industry, their machines are utilized for precision component manufacturing. Aerospace companies produce critical parts for aircraft. The energy sector utilizes its equipment for the production of components used in power generation and other systems. Additionally, medical technology companies rely on machinery for manufacturing of medical devices and implants.
-
-
-
-
-
NIDEC SANKYO
Machining Center
Manufacturer Overview
Nidec Corporation was founded in Kyoto, Japan in 1973 and is a conglomerate with over 200 subsidiaries. Primary products are hard-disk drive motors and automotive parts, and specializes motors ranging from miniature to gigantic. Nidec’s products are used in robotics, automotive, home appliances, agriculturel equipments well as molding, cutting, and machining equipment and sensors.
-
-
-
-
-
SUGINO MACHINE LIMITED
Machining Centers
Manufacturer Overview
SUGINO MACHINE LIMITED was established in 1936 and is a manufacturer and supplier of high pressure jet cleaning equipment, water cutting equipment, and industrial devices based in Namerikawa, Toyama, Japan. The company manufactures various products such as water beam machine, ultrasonic cutting machine, gun drill machine, dimple forming tool, and roller burnishing tool. The products are used in various applications such as aerospace, robotic, nuclear power plants, machining manufacture, and biosciences field. The company has obtained the ISO 9001 certification standard in 1998.
-
-
-
-
-
Kitamura Machinery Co., Ltd.
Machining Centers
Manufacturer Overview
Kitamura Machinery Co., Ltd., a company established in 1933 based in Takaoka-city, Toyama, Japan, is a manufacturer and supplier of precision machining centers. The company offers 5-axis, double-column, vertical, and horizontal models to meet machining needs. To ensure superior performance and precision, these models are integrated with advanced technology and features, including rigid construction, speedy spindles, accuracy, and CNC systems. The products find applications in the automotive, aerospace, medical information, and communication technology (ICT) industries. It also offers after-sale services such as turnkey engineering, installation training, and preventive support.
-
-
-
-
-
Okuma Corporation
Machining Centers
Manufacturer Overview
Okuma Corporation is a Japanese machine tool manufacturer that was founded in 1898 as the Okuma Noodle Machine Company before rebranding in 1918. Based in Oguchi, Aichi Prefecture, the company produces a wide selection of machines including CNC lathes, multi-axis machining centers, grinders, and multitasking machines. It also offers software and automation solutions that can be customized to improve the performance and functionality of its products. Okuma Corp. maintains a global support network via 28 subsidiaries located throughout Asia, the Americas, Europe, and the Pacific regions.
-
-
-
-
-
Cubotonic
CNC MACHINING
Manufacturer Overview
Cubotonic is a Portuguese contract manufacturer specializing in metalworking products and services that was established in Venda do Pinheiro, Mafra in 2014. The company offers a range of metal sheet, tube, surface, and component fabrication capabilities. These include bending, welding, laser cutting, assembly, and powder coating services, as well as custom design and development for unique projects or product use cases. The company chiefly serves clients in the automotive, construction, electrical, and aerospace industries.
-
-
-
-
-
BOTTERO S.p.A.
Pratica Plus
Manufacturer Overview
Bottero S.p.A., founded in 1957 and headquartered in Cuneo, Piemonte, Italy, is a developer and manufacturer of glass processing machines and systems. The company's primary products include a range of hollow glass and flat glass technologies. Its products include bottle-forming machines, glassware handling machinery, and flat glass float cutting machines. It specializes in providing complete processing lines and plants for glass process manufacturing, including lamination processing, and has expanded its operations into the solar panel market. The company's services include equipment and system refitting, maintenance, and operator training.
-
-
-
-
-
Pratic CNC
4 Axis CNC profile machining center
Manufacturer Overview
Pratic CNC is a Chinese manufacturer of CNC machining centers and related products that was established in Foshan, Guangdong in 2008. The company’s product lineup includes multi-function horizontal machining centers, gantry machining centers, and vertical machining centers. It also offers customizable automatic production lines, which integrate robots, conveyors, loaders, or unloaders with portfolio products. Pratic CNC products are commonly used in various industrial manufacturing operations, including within the automotive, aerospace, transportation, and rail sectors.
-
-
-
-
-
Victor Taichung Machinery Works Co., Ltd.
Vertical Machining Centers
Manufacturer Overview
Victor Taichung Machinery Works Co. Ltd., established in 1954 and headquartered in Taichung, Taiwan, is a machining tools manufacturer and supplier . The company's products include 5-axis high-speed machining centers, multitasking machining centers, and vertical turning lathes. It also offers alloy wheel machining centers and turnkey solutions, and its after-sales services include the supply of spare parts and operator training. The company has eight technical support and distribution centers located in the United States, Europe, and Asia.
-
-
-
-
-
Biesse S.p.A.
CNC Wood Machines
Manufacturer Overview
Biesse, founded in 1969 and based in Pesaro, Italy, is a manufacturer of integrated lines and machines for machining wood, glass, and stone. It also makes machines for machining plastic and composite materials. The wood business sells CNCs, panel saws, and edge banding machines. The glass business offers drilling, grinding, and polishing machines, while the stone business offers horizontal edge polishers, double edging, and waterjet cutting machines. The company is ISO 9001, ISO 14001, and ISO 45001 certified and is listed on the Italian Stock Exchange. It has 39 branches worldwide and has lodged over 200 patents.
-
-
-
-
-
Conprofe Technology Group Co., Ltd
Ultrasonic Drilling & Tapping Center
Manufacturer Overview
Conprofe Technology Group Co., Ltd is a manufacturer and supplier of advanced testing equipment and solutions that was established in 2003 and headquartered in Guangzhou Science City, China. The company designs and produces green manufacturing solutions and other key components. Its product lines include precision tools such as threading taps and precision tool holders. It offers key components of high-end equipment such as ultrasonic machining and welding, rotary tables, and lubrication. The company also offers ultrasonic green machining centers such as three-axis high precision and five-axis simultaneous ultrasonic machining centers. Conprofe’s comprehensive services include technical consultation, customized solutions, and after-sales support.
-
-
-
-
-
Komatsu NTC
Machining Centers
Manufacturer Overview
Komatsu NTCs, founded in 1945 and based in Toyama, Japan, is an ISO 9001:2008 certified manufacturer of machinery equipment. The company's range of products includes transfer machines, exclusive-purpose machines, crankshaft millers, grinding machines, and semiconductor manufacturing machines. The company is a subsidiary of Komatsu Limited and was awarded the Japan Brand Prize and the Good Design Award in 2006. It has also partnered with Dalian Bohai Machine Tools to establish Dalian Bohai Nippei Machine Tool Corporation. Its products are used in various countries, including Japan, India, Thailand, Indonesia, and Germany.
-
-
-
-
-
HYUNDAI WIA
Horizontal Machining Centers
Manufacturer Overview
Hyundai WIA, founded in 1976 in Seongsan District, Changwon, South Korea is a manufacturer of automative parts. The Company’s products include heavy equipment, defence products and aircraft parts. It also produces various auto- parts such as engines, automobile modules and precision machine tools including Factory Automations Systems. It is responding to the new trends in automotive development and creating a new industrial society through continuous research and development in other fields. The Company is ISO 9001, ISO/TS 16949, KS Q 9100 and KDS 0050-9000 certified. It is evolving into a world-class corporation building a future for all.
-
-
-
-
-
Productivity, Inc.
CNC Machining Centers
Manufacturer Overview
Productivity, Inc., established in 1968 and based in Plymouth, Minnesota, US, is a distributor and supplier of CNC metalworking products. The company's product range includes milling, turning, swiss turning, multi-tasking, grinding, and metal stamping. These products are employed in precision machining tasks. The company primarily serves industries such as Machinery Manufacturing, Aerospace, Automotive, and Electronics. Its services include machine repair, preventive maintenance, robotics and automation, and online auctions of surplus equipment.
-
-
-
-
-
KNUTH Machine Tools USA, Inc
Vertical Machining Centers
Manufacturer Overview
KNUTH Machine Tools USA is the American subsidiary of Knuth, originally founded in 1928. The American subsidiary is headquartered in Lincolnshire, Illinois. The company is a manufacturer of industrial machinery and accessories. The company has an extensive product listing including lathes, milling machines, grinding machines, drilling machines, as well as several others. The company’s accessories include consumables for EDM and cutting machines, machining tools, and machine accessories. The company also offers start-up services, maintenance services, repair, and spare parts services.
-
-
-
-
-
MAKINO INC.
Horizontal Machining Centers
Manufacturer Overview
MAKINO INC., founded in 1981 and based in Mason, Ohio, USA, is a manufacturer and supplier of machining solutions. They offer a wide range of products, including horizontal machining centers, vertical machining centers, machining centers, graphite machining centers, and wire and sinker EDMs. These machining solutions enable precise and efficient metal cutting and shaping processes, catering to diverse industries, including aerospace, automotive, medical, and die/mold manufacturing, for increased productivity and quality production of industrial products such as bolts, sheet metals, and more.
-
-
-
-
-
Shenzhen Joint Technology Co., Ltd.
Gantry type Vertical Machine Center
Company Overview
Shenzhen Joint Technology Co., Ltd., established in 1995 and based in Shenzhen city, China, is a manufacturer and supplier of mold processing and machinery parts processing equipment. The company's product portfolio includes surface grinding machines, CNC deep hole drilling machines, and electrical discharge machines. These products are utilized in various industries, including the oil and gas industry, metalworking, and power generation. The company provides services, including technical support, installation, and machine customization. The company is ISO 9001:2008 certified, and its products are sold to more than 250 countries, including the United States, Malaysia, and Germany.
-
-
-
-
-
WILLEMIN-MACODEL
301S2
Company Overview
Willemin-Macodel, established in 1974 and based in Delémont, Jura, Switzerland, is an ISO 9001-certified manufacturer of industrial machinery. The company's products include turning centers for turning part or component materials, machining centers for producing complex workpieces, and customized automation systems for enhanced productivity in industrial facilities. It also offers proprietary machine control software, installation services, and technical support. The company chiefly serves clients in the industrial mold manufacturing, watchmaking, and aerospace sectors.
-
-
-
-
-
Jinan Penn CNC Machine Co.,Ltd.
aluminum wood cnc machining center
Company Overview
Jinan Penn CNC Machine Co.,Ltd. is a manufacturer and distributor of CNC machines and related products that was established in Jinan, China in 2006. The company’s product portfolio includes laser machines, waterjet machines, and plasma machines. It also offers various CNC routers including multi-head, ATC, and mini models, along with technical support services such as installation and personnel training. The company’s products are commonly used within the woodworking, metalworking, and industrial manufacturing sectors.
-
-
-
-
-
Lywentech, Co., Ltd.
MV Moving Column Machining Center
Company Overview
LYMCO, established in 1996 and based in Zhonghe District, Taiwan, is a manufacturer and supplier of CNC (Computer Numerical Control) machine tools. The company's product portfolio includes turning-milling centers, 5-axis milling, and vertical turning and milling. These products find applications in various industries, including general manufacturing, oil and gas, and mold and die manufacturing. The company also offers services, including technical support, test-running every single machine prior to shipment, and ensuring that the machines meet the customers' specifications.
-
-
-
-
-
OMC di Bisognani s.r.l.
CNC machining center
Company Overview
OMC Machinery, established in 1960 and located in Coriano, Rimini, Italy, is a manufacturer of machinery for processing aluminum and PVC profiles. The company’s product lineup includes aluminum profile processing machines for drilling or milling aluminum profiles, automatic saws for precise cutting of profiles, and PVC profile processing machines for fabricating PVC profiles. It also offers end milling machines for end milling operations along a production line. The company primarily serves clients in industrial manufacturing, construction, and engineering operations.
-
-
-
-
-
ACCUWAY MACHINERY CO., LTD.
MACHINING CENTERS
Company Overview
ACCUWAY MACHINERY CO., LTD., established in 1986 and headquartered in Taichung City, Taiwan, is a manufacturer and supplier of vertical machining centers and CNC lathes. The company's product portfolio includes integrated loader lathes, 5-axis machines, and turret types. These products are utilized in various industries, including aerospace, energy production, and consumer electronics. The company is ISO 9001 certified, with dealers in various countries for improved access to global markets, including the United States, China, and Finland.
-
-
-
-
-
Racer Machinery International Inc.
MULTI TASKING MACHINE
Company Overview
Racer Machinery International Inc.,established in 1983 and based in Cambridge, Ontario, Canada, is a manufacturer specializing in industrial manufacturing machine tools and equipment. The company’s product lineup includes computer numerical control (CNC) machine tools for precision machining applications, metal cutting engine lathes for sheet and plate metal cutting applications, and industrial saws in various dimensions. It also offers megatronic PC-CNC controllers, RMC screw mills, and installation services for customers requiring additional support. The company mainly serves clients in the industrial manufacturing sector.
-
-
-
-
-
ROMI S.A.
MACHINING CENTERS
Company Overview
ROMI S.A., founded in 1930 and headquartered in São Paulo, Brazil, is a manufacturer and supplier of machine tools, plastic processing machines, and castings. The company's product portfolio includes engine lathes, plastic injection molding machines, and nodular castings. These products find applications in various industries, including automotive components manufacturing, consumer goods, and agricultural machinery and implements. The company holds both ISO 9001:2015 and IATF 16949:2016 certifications, with a network of distributors and subsidiaries in various countries, including the United States, France, and Germany.
-
-
-
-
-
Huracan Maquinarias S.L.
CNC MACHINING CENTER
Company Overview
Travis CNC - Huracán Maquinarias, established in 1977 and headquartered in Barcelona, Spain, is a manufacturer and distributor of CNC and conventional machines. The company offers comprehensive services to its customers throughout the part machining process. Its product lineup includes specialized machinery such as the MM-4, a 3-axis CNC machining center; the TR-1 XP, a 2-axis horizontal flatbed CNC lathe; and the 4VS, a 3-axis vertical milling machine equipped with a moving table. These products are primarily utilized in the metallurgical sector for precision tasks and chain production, capable of handling a diverse range of materials.
-
-
-
-
-
FOM INDUSTRIE s.r.l.
CNC Machining centres 3+1 axes
Company Overview
Fom Industrie is a high-technology machine tool manufacturer for cutting and machining extruded aluminum, founded in 1972 and based in Cattolica, Italy. It manufactures automatic cutting and machining lines, single and double-head sawing machines, and traditional machines. It also provides CNC machining centers, end milling machines, copy routers, crimping machines, drilling machines, roller tables and stops, thermal breaks, and other complementary machines. The products can be used to saw, cut, and mill the materials in question. Currently, it has partnered with 55 official distributors to market its products.
-
-
-
-
-
Biesse Group
CNC Machining Centers
Company Overview
Biesse Group was founded in 1969 in Pesaro, Italy, as a manufacturer, designer, and distributor of systems and machines for processing wood, glass, stone, metal, plastic, and composite materials. The company offers various products and services, including wood, glass, stone, and advanced materials processing machines, grinders, tools, components, and systems, as well as industrial, mechanical, and electronic components. The products find applications across woodworking, glass, and stone industries, advanced materials processing, and various manufacturing sectors, offering solutions for automation, precision, and material processing. The company caters to different sectors such as construction, transport, marine, medical, furniture, and aerospace.
-
-
-
-
-
Matsuura Machinery USA, Inc.
5-AXIS MACHINING CENTERS
Company Overview
Matsuura Machinery USA, Inc. is a Saint Paul, Minnesota-based U.S. manufacturer and distributor of machining centers that was established in 2013 as the North American subsidiary of Japan’s Matsuura Machinery Corporation. The company’s product lineup includes 5-axis horizontal as well as vertical machining centers, multitasking machines combining turning and milling operations, linear motor-driven machining centers, and powder bed metal additive manufacturing (AM) platform machines for fabrication of complex parts. The company’s products are used mainly in the energy, defense, aerospace, and automotive industries.
-
-
-
-
-
PSS Abrasives & Tool Division
CNC Microhone System
Company Overview
PSS-Abrasives & Tool Division, established as Bates Technologies Inc. in 1985 and headquartered in Noblesville, Indiana, United States, is an industrial surfacing tool and equipment manufacturer and B2B supplier. The company's products include vertical and horizontal bore honing production machines, CNC micro-hone systems, and gagging and size control systems.Its services include the production of custom honing stones and tooling, a test drive trial program, and tool reconditioning. In 2005, the company acquired the tooling and abrasive line of products from Micromatic, adding to its legacy of 80 years of honing and bore finishing experience.
-
-
-
-
-
ATECH Machine San. ve Tic. Ltd. Sti.
4-axis CNC Controlled Machining Center
Company Overview
Atech, established in 1999 and based in Istanbul, Turkey, is a manufacturer and supplier specializing in machinery for the window and door industry. The company's product portfolio includes corner crimping machines, composite panel dimensioning saws, and woodworking machines. These products find applications in various industries, including furniture manufacturing, construction, and the window and door manufacturing industry. The company offers services, including customization, technical support, and regular maintenance of customers' machinery. It exports its products to various countries, including the United States, South Africa, and the Netherlands.
-
-
-
-
-
ROTOX USA inc.
Machining center
Company Overview
ROTOX USA Inc. is an American distributor of machinery for window construction established in 2006 as a North American subsidiary of the German company ROTOX GmbH. The company offers various machines for glazing, assembly, cutting, and welding operations, as well as machining centers for drilling and milling profiles or bars. It also offers material handlers for storing and sorting, corner cleaning machines and software that optimizes production planning. The company's products are mainly used by clients in the construction and architecture sectors, as well as by door and window manufacturers.
-
-
-
-
-
Acer Group
Machining Centers
Company Overview
Acer Group, established in 1985 and based in Taiwan, is a credited manufacturer and supplier of metal cutting machines. The company's product lineup includes vertical machine centers, CNC bed/knee type mills, precision manual mills, surface grinders, and engine lathes, serving industries such as metalworking and machinery manufacturing. These products are pivotal for applications like precision metal cutting, shaping, and grinding. The company's services include onsite installation for DRO brands, milling head rebuilds, and CNC retrofit.
-
-
-
-
-
Boygatech
CNC Machining Center
Company Overview
Boygatech, based out of Çorlu, Turkey, is a manufacturer and factory-direct supplier of woodworking machines and equipment. The company specializes in wooden door production machines, including door frame cutting and drilling machines, wooden door hinge and lock hole drilling machines, and CNC router machines. It also offers a range of wrapping machines, painting machines, and packaging machines. The company has proven experience in and offers turnkey wooden door production machines, custom furniture factory machines, and processing line projects.
-
-
-
-
-
Ellison Technologies
VERTICAL MACHINING CENTERS
Company Overview
Ellison Technologies was founded in 1983 as a supplier of machining solutions and is headquartered in California. The company provides CNC machining solutions, including lathes, machining centers, lasers, and metrology tools that help manufacturers to meet all their production needs. There are also EDMs, Saws, Grinding machines, and Automation systems for part set-up, production set-up, production movement, cobots, and robotics. They also provide services that include maintenance and repair of machines along with supplying parts and accessories. They serve industries that are complete Machining centers, or Turning centers.
-
-
-
-
-
HOMAG Group
CNC Machining Centers
Company Overview
HOMAG Group, established in 1960 and headquartered in Schopfloch, Bayern, Germany, is a manufacturer and supplier of machinery and equipment for woodworking and furniture production. The company's product lineup, includes panel storage systems, panel dividing and cutting machinery, edge banders and tensioners, and CNC machining centers. These tools serve various sectors, including furniture production, interior fittings, shopfitting and furnishing, building components, and flooring. Additionally, the company provides services such as service contact, HOMAG Service, fast support, and software downloads.
-
-
-
-
-
-
-
SEMA Management GmbH
Machining Center
Company Overview
SEMA Management GmbH is based in Traunkirchen, Austria, and is a manufacturer of machining and automation systems for industrial manufacturing operations established in 1994 as a part of the SEMA Technology Group. The company’s product lineup includes rotary multi-transfer (MT) machines for high-volume machining of complex workpieces, and modular end-facing machines for processing axle- or shaft-shaped parts. It also offers C-SYS heating and cooling systems for tempering applications to strengthen workpieces in the fabrication process. The company chiefly serves clients in the industrial manufacturing and automation sectors.
-
-
-
-
-
-
-
SPINNER Werkzeugmaschinenfabrik GmbH
MILLING
Company Overview
Spinner Werkzeugmaschinenfabrik GmbH, founded in 1949, is a manufacturer based in Sauerlach, Germany, specializing in computer numerical control (CNC) turning and milling machines. The company's turning machines include universal turning lathes, multi-turret lathes, and ultra-precision lathes for intricate components demanding top-notch accuracy. It also offers milling machines with 3-axis and 5-axis machining centers for cutting flexibility of different materials. The company further develops machines with automation systems, offering diverse integration options such as loading/unloading systems, robots, and tool changers.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
WFL Millturn Technologies GmbH & Co.KG
MILLTURN
-
-
-
-
-
SANJO. Crumell International Holding S.L.
CNC MACHINING
-
-
-
-
-
LMW
MACHINING CENTER
-
-
-
-
-
Protek s.r.l.
COMPACT
-
-
-
-
-
Scandinvent
C3
-
-
-
-
-
ZAYER
ZERO
-
-
-
-
-
Masterwood SpA
WINNER 250
-
-
-
-
-
Buffoli Transfer S.p.A.
4 or 5-axis machining centers
-
-
-
-
-
PCI MACHINING
Horizontal machining center
-
-
-
-
-
CTR NORTE GmbH & Co. KG
Verticale machining centers
-
-
-
-
-
MAKINO Europe GmbH
Graphite Machining Centers
-
-
-
-
-
FILL Gesellschaft m.b.H.
SYNCROMILL C
-
-
-
-
-
Shinzawa Precision Machinery Co., Ltd.
VERTICAL MACHINING CENTER
-
-
-
-
-
GEAM Evolution s.r.l.
Cutting Center
-
-
-
-
-
Posalux SA
MECHANICAL MICRO-MACHINING
-
-
-
-
-
BURKHARDT+WEBER Fertigungssysteme GmbH
MACHINING CENTRES
-
-
-
-
-
Avemax Industrial Co., Ltd.
CNC Bed Type Machine Center
-
-
-
-
-
KAO MING Machinery Industrial Co., Ltd.
Double-Column Machining Center
-
-
-
-
-
F. ZIMMERMANN GMBH
Horizontal Machining Centers
-
-
-
-
-
Masteel America Corp.
MACHINING CENTERS
Distributor Overview
Masteel America Corp., established in 1999 and headquartered in Oakville, Canada, is a supplier of machining and fabrication equipment, including the Leadwell and L&L machine tool lines. The company’s fabricating and machining equipment includes press brakes, shearing machines, and CNC lathes. Partnering with CNC tech it ensures prompt installation, service, and retrofitting. Its metric machine tool service offers set-up, installation, and servicing for manual & CNC machines. The company’s westcam solutions specialize in CAM/DNC software, training, and support, particularly emphasizing GibbsCAM for complex multi-axis machines.
-
-
-
-
-
Surplex GmbH
CNC Machining Centres
Distributor Overview
Surplex GmbH is an e-commerce supplier of digital auction trade for used machinery and was founded in 1999 and headquartered in Düsseldorf, Germany. The product categories are metal, wood, and construction with machinery such as excavators, containers, construction vehicles, rollers, loaders, and power & lighting. The wood category has saws, planing machines, edge banders, spindle moulders, and CNC machining. The metal tools are lathes, grinding machines, sheet metal processors, drilling machines, and presses. The company buys machinery from customers and is ISO 9001:2015 certified.
-
-
-
-
-
DS Technology (USA) Inc. dba Starrag
Horizontal machining centers
Distributor Overview
DS Technology (USA) Inc. dba Starrag, established in 1862 and based in Rye, N.Y., France, is a manufacturer and supplier of precision machining equipment. The company's product range includes Berthiez, Bumotec, Dörries, Droop+Rein, and Ecospeed. These state-of-the-art machines are designed for intricate applications in several sectors. Serving industries such as Aerospace, Energy, Industrial, and Micromechanics, these products serve different tasks from aero engine construction to micro parts production. Its services include direct service contacts, specialized service products, and success stories from satisfied customers.
-
-
Machining Center Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Comau |
3.3%
|
| 2 | TRAK Machine Tools - Southwestern Industries |
2.9%
|
| 3 | ROMI S.A. |
2.4%
|
| 4 | Camozzi Machine Tools |
2.4%
|
| 5 | ALZMETALL GmbH & Co. KG |
2.1%
|
| 6 | Control Laser Corp. |
2.0%
|
| 7 | RALC ITALIA Srl |
1.8%
|
| 8 | MECAL MACHINERY S.r.l |
1.7%
|
| 9 | Takumi USA |
1.7%
|
| 10 | Lagun Engineering |
1.7%
|
Derivation Method
The ranking is calculated based on the click share within the machining center page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- NIDEC SANKYO: 114,371
- DMG MORI CO., LTD.: 12,259
- Okuma Corporation: 3,802
Newly Established Company
- KAAST Machine Tools, Inc.: 2009 (15 years ago)
- Pratic CNC: 2008 (16 years ago)
- Conprofe Technology Group Co., Ltd: 2003 (21 years ago)
Company with a History
- Paolino Bacci S.r.l.: 1918 (106 years ago)
- GROB-WERKE GmbH & Co. KG: 1926 (98 years ago)
- ROMI S.A.: 1930 (94 years ago)
Machining Center Manufacturers in United States
*Including some distributors, etc.
- Hwacheon Machinery America Inc
- Takumi USA
- Control Laser Corp.
- Camozzi Machine Tools
- Cameron Micro Drill Presses
- Lagun Engineering
- Flex Machine Tools
- Kent CNC
- Haas Automation, Inc.
- KAAST Machine Tools, Inc.
- JINGDIAO NORTH AMERICA, INC
- Hurco
- Elumatec North America, Inc.
- JTEKT Toyoda Americas Corp.
- Revolution Machine Tools
- TRAK Machine Tools - Southwestern Industries
- NTC America Corporation
Global Distribution of Machining Center Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
17 | 23.0% |
Italy
|
13 | 17.6% |
Japan
|
11 | 14.9% |
Germany
|
8 | 10.8% |
Taiwan
|
7 | 9.5% |
China
|
6 | 8.1% |
Switzerland
|
3 | 4.1% |
Turkey
|
2 | 2.7% |
Spain
|
2 | 2.7% |
Sweden
|
1 | 1.4% |
Canada
|
1 | 1.4% |
Brazil
|
1 | 1.4% |
Austria
|
1 | 1.4% |
Republic of Korea
|
1 | 1.4% |
List of Machining Center Products
11 products are listed.
Fuji Sangyo
The work on the ball board and the milling board is one unit, and the panel ganttry (gate type) processing machine with a completed saw is completed.
50+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Compatible with large work of up to 8000x1500 (gate type) processing machine with a saw
50+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Equipped with a dialogue -type program Easy processing program creation NC Long processing machine ATC specification
50+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Easy operation with a dialogue menu standard simple small NC long -term processing machine
60+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Joso removal processing for the first time with painting with a painting type program method NC bonus removal machine
60+ people viewing
Last viewed: 3 hours ago
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
3 sides of the top and left and right sides with one chauck for a long size of up to 5m, 3 sides (gate type) processing machines.
50+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Ideal for processing long steel and plate items, high torque type gunto (gate type) processing machine
60+ people viewing
Last viewed: 6 hours ago
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
With an index device, 4 sides can be processed with 1 clamp NC long processing machine index specification
50+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Ideal for steel material processing such as square pipes, angle steel, H steel, etc. NC Long torque high torque high rigidity specification / coolant specification
60+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Multi -pipe cut processing multifunction device equipped with a two -axis of the steel cut cut and the main shaft head
60+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
Fuji Sangyo
Long multifunction device with a processed saw with one unit from drilling, milling to angle cutting.
60+ people viewing
The NC Long -shaped processing machine (a long -shared machineing center) is an NC processing machine specializing in long -term processing. Our p...
