All Categories
History
This section provides an overview for swell tape as well as their applications and principles. Also, please take a look at the list of 10 swell tape manufacturers and their company rankings. Here are the top-ranked swell tape companies as of December, 2024: 1.WEBAC-Chemie GmbH, 2.Saint-Gobain Weber, 3.SealBoss.
Table of Contents
Swell tape is tape made of non-woven fabric that absorbs water. It is sometimes described as water absorbent tape or watering tape.
It is often used for watering flowerpots. In addition, water condensation on window sills and other surfaces can be absorbed by swell tape, which will evaporate over time and dry it out. This can prevent stains, dirt, mold, etc., caused by condensation from wetting floors and walls. If there are areas around the kitchen that are prone to condensation, Swell Tape can help protect the walls as well as the window sills. Recently, products with colorful patterns are also available.
Swell tape is used to absorb excess water. Recently, it has been used for bottom-feeding pots. Plants can be watered by filling a PET bottle or similar with water, inserting the Swell Tape, and then inserting the other end of the tape into the flowerpot.
It is also used to absorb condensation from window glass. When condensation is absorbed with swell tape, dirt and damage to window frames, walls, and floors can be reduced. It can also be attached to air conditioner vents to prevent condensation.
Swell Tape has a simple mechanism. It is made of a highly absorbent and wicking non-woven fabric made of polyester. Felt may also be used. Some products have a seal on the back and some do not.
Swell tape is inserted into a bottom-feeding flowerpot to supply water to the flowerpot. This is convenient when you are away from home for a while or when you cannot water the flowerpot. Note that swell tape may absorb too much water, resulting in root rot and mold due to the growth of bad bacteria caused by excessive moisture.
When using swell tape for anti-condensation applications, be sure to apply one row to the lowest part of the windowpane. Swell tape will absorb moisture, preventing moisture from seeping out and accumulating on the floor and walls, and preventing mold, dirt, and stains on the wood. Swell tape should be replaced after about one year, as the adhesive will deteriorate. If too much moisture is absorbed by the Swell Tape, the tape itself can become moldy or cause foul odors. If this becomes a concern, the tape can be replaced or the amount can be adjusted.
Water-absorbing tape absorbs water, but its effectiveness will be halved if it is not applied in the right place.
The main place to put the tape is on window panes in an ordinary home. In winter, the tape is used to prevent mold and mildew from forming on the glass surface due to moisture condensation.
In this case, the place to apply the water-absorbing tape is at the bottom of the window glass. The tape will absorb the moisture that flows out below due to condensation. This will inhibit mold from forming on the edges of the window.
The amount of water absorbed by the absorbent tape is 30 grams per meter, so it has a large capacity and can absorb enough moisture from condensation even on windows on the north side, which are prone to condensation, or on glass in the direction of the window, which is easily shaded.
However, no matter how large the capacity of the tape, there are limits to how much it can absorb. For example, if the window glass is in a sunny location during the day, there is not much of a problem, but in other locations, the limit to the amount of absorption will quickly come and go.
If the absorbent tape is left in place past its limit, mold may form on the tape itself or it may emit a bad odor, so it is best to replace the absorbent tape if you feel that it is not drying easily.
In the above section, we explained that absorbent tape that has exceeded its limit must be removed or it will be harmful. However, even if you replace the tape, you may be wondering how to remove the tape cleanly.
If the tape leaves a mark, mold may grow from it, so you may want to remove it cleanly.
Here is how to remove the water-absorbent (swell) tape, leaving no marks.
This method involves spraying the tape with a sticker remover spray, which can be found at stores such as 100-yen stores. Since it is readily available, it is easy to remove and very convenient.
However, depending on the condition of the water-absorbent tape, there may be traces of the tape even after spraying and removing the sticker.
If you use items in your house, you can remove the tape by using kitchen detergent and hot water.
Dissolve the detergent in hot water and moisten the absorbent tape with hot water on a sponge. Leave it for a while (10 to 20 minutes), and the tape can be removed cleanly.
However, even in this case, some tape marks may remain, so it is best to scrape off the residue with a plastic spatula.
*Including some distributors, etc.
Sort by Features
Sort by Area
WEBAC, established in 1978, is headquartered in Lehrte, Germany, and operates as a manufacturer and supplier of specialty chemicals and equipment for the construction industry. Their product line includes injection resins, sealants, grouts, and waterproofing solutions. Their products find applications in various industries such as civil engineering, infrastructure, tunneling, and restoration. Injection resins are used for crack repair and reinforcement, sealants for joint sealing, grouts for stabilization, and waterproofing solutions for moisture protection. WEBAC maintains certifications like ISO 9001, ensuring standards of products in demanding construction applications.
Wasser Isolier Systeme, founded in 1978 and based in Hammfelddamm, Germany, is a manufacturer specializing in waterproofing solutions. The company offers an extensive and diverse product portfolio, including repair and strengthening mortars, polyurethane waterproofing, cementitious waterproofing, waterproofing membranes, and sealants and joint fillers. These quality products have applications in various industries, such as carpentry and joinery, filling gaps and cracks in building walls and floors, and serving as repair and filling materials for concrete and cement surfaces. Additionally, the products are used in waterproofing and stabilization projects, particularly in structures like tunnels, where water ingress prevention is crucial.
Saint-Gobain, based in Courbevoie, France, and established in 1665, is a construction and water-proofing chemical manufacturer. The company provides in various industrial sectors, including health, energy, metallurgy, non-metal raw materials, mineral extraction, chemicals, petrochemicals, and semiconductors. It has expertise in designing, manufacturing, and distributing materials and services for the construction and industrial markets. The company is actively working with automobile, aerospace, and rail equipment companies to develop safer and more energy-efficient mobility solutions.
SealBoss, established in 1988, is a manufacturer and distributor of construction-related products and waterproofing solutions based in California, USA. The company manufactures injection systems used in construction and infrastructure maintenance. These systems are used in concrete repair, crack injection, and waterproofing applications. Sealants and waterproofing materials, including polyurethane and epoxy-based products, are also offered. These materials find applications in seal joints, cracks, and surfaces to prevent water infiltration and protect structures from moisture damage.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | WEBAC-Chemie GmbH |
50.0%
|
| 2 | Saint-Gobain Weber |
25.0%
|
| 3 | SealBoss |
25.0%
|
Derivation Method
The ranking is calculated based on the click share within the swell tape page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
Turkey
|
3 | 50.0% |
|
Germany
|
2 | 33.3% |
United Kingdom
|
1 | 16.7% |
5 products found
5 products
Re-Products Co., Ltd.
50+ people viewing
Last viewed: 15 hours ago
A standard long-selling product manufactured by our company. A water/oil absorbing sponge that is effective for all kinds of water and oil leaks. P...
Aquaboy Co., Ltd.
30+ people viewing
2mm thick tape absorbs approximately 550g of water. It expands to fill gaps and prevent water from seeping in. AB-550 is a multi-purpose product th...
Techno Roll Co., Ltd.
60+ people viewing
Last viewed: 29 minutes ago
Standard Response
Revolutionary ultra-thin sleeve cover for both Molton and continuous water supply (patented) *Currently only available in sizes 4.5.6.9.19. The Wa...
Techno Roll Co., Ltd.
120+ people viewing
Last viewed: 1 hour ago
Standard Response
The ultimate Molton cover with minimal shedding and no worries about dust or dirt. Water rod roller cover for offset printing High quality cotton ...
Bell Development Co., Ltd.
150+ people viewing
Last viewed: 1 day ago
■ Pumped and water absorption It has excellent pumping and water absorption, spreads water in a short time and draws water. ■ Durability Even if y...
