25 Water Sealing Material Manufacturers in 2024
This section provides an overview for water sealing materials as well as their applications and principles. Also, please take a look at the list of 25 water sealing material manufacturers and their company rankings. Here are the top-ranked water sealing material companies as of April, 2024: 1.Nitto Denko Corporation.
Table of Contents
What Are Waterproofing Materials?
Waterproofing materials are various types of seals, paints, and special cement used to prevent water from entering or flowing out of buildings and other structures for a variety of reasons.
Watertight plates are used to protect houses and other structures from the large amounts of water that occur during heavy rains. Water sealing board is considered a type of waterproofing material.
Various types of watertight panels are available, depending on the location and size of the installation.
Uses of Waterproofing Materials
Waterproofing materials include waterproof cement, which can be packed into areas where water may enter and hardens in a relatively short time, waterproof seals that can absorb water when attached to concrete joints, and even waterproof paints.
On the other hand, watertight panels are used not only in ordinary houses but also in various other places to protect houses and other structures from large amounts of water intrusion.
These include subway entrances and exits, store entrances and exits, building and apartment entrances and exits, and underground parking lots.
Principle of Water Sealing Materials
As mentioned above, watertight panels are used not only in ordinary houses but also in various other places, and their performance is being evaluated.
Some manufacturers of watertight panels will conduct various leakage tests as performance tests of their products and present the results as a selling point of their products.
These include wave tests to evaluate the durability of watertight panels by generating simulated waves, water flow tests to evaluate the strength of watertight panels by varying the strength of the water flow, and stillness tests to evaluate whether the panels remain stationary at a certain point when a certain amount of water flows into them.
Watertight panels need to be designed based on the expected amount of water, the height of the watertight panel, impact resistance against drifting debris, and how to store the panels under normal conditions.
There are several types of watertight panels, including door type, motorized type, manual type, sliding type, swinging type, and detachable type.
As the name suggests, the door type is a type of water stop board that is shaped like a door. The electrically operated type is hidden from view during normal operation, and the panel is electrically activated to stop the water when it is in operation.
The manual type is similar to the motorized type, but is operated by hand. The sliding and swinging types differ according to the direction of movement of the panel. The detachable type can be removed and installed only when necessary, so it requires storage space, but it has advantages such as low cost and almost no maintenance.
List of 25 Water Sealing Material Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Belgium
- Germany
- India
- Japan
- Mongolia
- United Kingdom
-
-
-
Tremco
Waterproofing
Manufacturer Overview
Tremco is based in Beachwood, Ohio, USA, and is a manufacturer of roofing materials founded in 1928 as a subsidiary of RPM International Inc. The company produces various roofing systems for residential, commercial, and industrial buildings. It also offers related accessories including sealing or waterproofing products, fire retardant coatings, and concrete admixtures for protection or repair. The company provides additional inspection, waterproofing or roofing design, and glazing system fabrication services for customers with unique project parameters. Its products are used in the construction, energy generation, and government sector.
-
-
-
-
Manufacturer Overview
H.B.Fuller, founded in Vadnais Heights, MN, in 1887 is a manufacturer of adhesives, sealants and other specialty chemical products. The company's product portfolio includes Industrial Adhesives sued for or bonding various materials, including metals, plastics, wood, ceramics, and composite, Industrial Sealants used in construction, automotive, and aerospace industries and Tapes and Labels. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. They also provide services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing.
-
-
-
-
-
Deco Products
Concrete sealing
Manufacturer Overview
Deco is based in Decorah, Iowa as a manufacturer of zinc die castings and parts since 1960. The company designs and engineers new products, prototypes, robotics, and automation, using zinc and zinc alloy die-casting to get more lighter-weight, longer-lasting, and cost-effective products. They also provide other services like Powder Coating, Decorative and Functional Plating, Machining, and Assembling to partner with industries like Furniture, Power / Hand Tools, Lighting / Electrical, windows and doors, and many more.
-
-
-
-
-
Key Resin Co.
Key Waterproofing and Crack Isolation Membranes
Manufacturer Overview
Key Resin Co., a certified ISO 9001:2015 company, was established in 1993 and is headquartered in Batavia, Ohio. As a manufacturer, they specialize in floor and wall coatings, MMA (Methyl Methacrylate), moisture vapor controls, and elastomeric. The company supplies a comprehensive product range including epoxy flooring, urethane coatings, and decorative systems, essential for durability and aesthetic enhancement. Key Resin serves diverse industrial sectors including chemical processing, commercial, education, food and Beverage, and healthcare.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Concrete Service Materials Company
Silica Sand
Distributor Overview
Concrete Service Materials Company, established in 1939 and based in Conshohocken, Pennsylvania, operates as a manufacturer and distributor of construction equipment and supplies. The company has been offering the latest in construction and concrete supplies with over a thousand products in stock. Its product range encompasses form coatings, curing compounds & sealers, non-shrink grouts (both metallic and non-metallic), floor hardeners, and epoxy compounds. These products cater to various construction needs, offering solutions for tasks such as concrete resurfacing, waterproofing, and fire stopping.
-
-
-
-
-
Systel Instrumentation Services Private Limited
WATERPROOFING
Manufacturer Overview
Systel Instrumentation Services Private Limited, founded in India in 2011, is a manufacturer of industrial equipment and products. The company caters to the diverse requirements of various industries by offering Industrial Equipment and Products inclusive of Water Level Meters, Triaxial Joint Meters, Vertical Inclinometer, Water Level Recorder, and Inclinometer Probes. The products are widely used in applications such as historical monuments, bridges, cliffs, nuclear power plants, and buildings. It sells its products to Nepal, Bangladesh, India, and Middle East.
-
-
-
-
-
Soil Instruments Limited
Waterplug
Manufacturer Overview
Soil Instruments., founded in the UK, is a manufacturer of premium quality geotechnical instrumentation. The company offers precise inclinometers and extensometers designed for monitoring ground movement and structural deformation, comprehensive settlement monitoring systems that track elevation changes, ensuring the stability of structures and foundations, geotechnical sensors that record critical data such as pore water pressure, soil stress, and strain and data loggers and software packages. It serves industries such as civil engineering, mining, railway and road infrastructures.
-
-
-
-
-
TPH Bausysteme GmbH
Water-swelling rubber
Manufacturer Overview
TPH Bausysteme GmbH is based in Aichi, Japan, and is a manufacturer of waterproofing and tunneling products that was originally founded in 1948 before being acquired by Sika in 2020. The company primarily produces equipment used for waterproofing and surface protection. Its products include piezoresistive pressure transmitters, industrial-grade cutting tools, and CO2 meters. The company also offers product consultation, technical support, and calibration certification services. It mainly serves clients in the wood and metal processing, petrochemical, and HVAC industries.
-
-
-
-
-
Nitto Denko Corporation
Foam Sealing Material SEAL-SAVER
Manufacturer Overview
Nitto Denko Corporation is a Japanese manufacturer of adhesive tapes, optical films, semiconductors, electronic devices, and consumer products, was founded in 1918 and is headquartered in Osaka. The company operates through several segments, including industrial tape, optronics, human life, and Others. Their products are used in a wide range of industries, including automotive, display, life sciences, and more. They are always one step ahead in making good things happen with their advanced optical films for liquid crystal displays and the ability to create a constant stream of Global Niche Top products.
-
-
-
-
-
KUNIMINE INDUSTRIES CO., LTD.
Waterproof Materials (Seal Materials)
Company Overview
Kunimine Industries Co. Ltd., established in 1943 and headquartered in Tokyo, Japan, is a manufacturer and supplier of chemical products and functional materials. Its clay science business promotes research and development in the fields of agribusiness, life sciences, and cosmetics. The company offers Kunipia series cosmetic products, which are produced by removing impurities from natural bentonite and fine chemicals such as Sumecton, a clay produced by chemical synthesis. It also offers environmental preservation treatment agents, which are used in exhaust gas treatment processes at waste incineration plants. Its Kunipia series products comply with the COSMOS standard and are certified as COSMOS APPROVED.
-
-
-
-
-
-
-
-
-
-
-
-
-
LAMBERT SOUTHWEST
DECO SEAL
-
-
-
-
-
Bitum Ltd
Polymer Water-Proof Materials
-
-
-
-
-
Aquatron-BKhK
AQUATRON-8 waterproofing (water sealing)
-
-
-
-
-
-
W. R. MEADOWS, INC.
Concrete Waterproofing
Company Overview
W. R. MEADOWS, INC., founded in 1926 and based in Hampshire, IL, designs, manufactures, and markets building materials. Its product range includes building envelopes, air barriers, construction liquids, sealing compounds, surface retarders, concrete expansion joints, joint sealants, backer rods, and more. The company owns a distribution network that delivers products for building, rebuilding and restoring infrastructure, modular buildings, multi-family houses, pavements etc. W. R. MEADOWS caters to clients through multiple branch locations within North America and internationally.
-
-
-
-
-
DUNBAR SALES CO INC
Adhesives & Sealants
Distributor Overview
Dunbar Sales, founded in 1960, is a supplier of government-spec supplies to the military and indirect related industries, including builders of satellites and weaponry. The company’s product portfolio includes coatings, adhesives, sealants, lubricants, and corrosion-related solutions. They have a flexible system that enables them to offer supplies of any size and or quantity from tubes to truckloads in glass, metal or plastic. With personalized customer service and a searchable online catalog, Dunbar Sales provides customers with a one-stop solution for over 500 government-specification products.
-
-
Water Sealing Material Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Nitto Denko Corporation |
100.0%
|
Derivation Method
The ranking is calculated based on the click share within the water sealing material page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Nitto Denko Corporation: 28,371
- Systel Instrumentation Services Private Limited: 11
Newly Established Company
- Systel Instrumentation Services Private Limited: 2011 (13 years ago)
- Sika Mongolia LLC: 2010 (14 years ago)
- BPA GmbH: 1998 (26 years ago)
Company with a History
- Newton Waterproofing: 1848 (176 years ago)
- W. R. MEADOWS, INC.: 1926 (98 years ago)
- PUFAS: 1928 (96 years ago)
Water Sealing Material Manufacturers in United States
*Including some distributors, etc.
- Tremco
- H.B.Fuller
- Deco Products
- Key Resin Co.
- SOPREMA
- IPA System Inc.
- X-Calibur Construction Chemistry Inc.
- MOXIE SHIELD
- Aqua Cast Liner LLC
- Concrete Service Materials Company
Global Distribution of Water Sealing Material Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
10 | 52.6% |
United Kingdom
|
2 | 10.5% |
Germany
|
2 | 10.5% |
Japan
|
2 | 10.5% |
India
|
1 | 5.3% |
Belgium
|
1 | 5.3% |
| Mongolia | 1 | 5.3% |
