102 Cap Screw Manufacturers in 2024
This section provides an overview for cap screws as well as their applications and principles. Also, please take a look at the list of 102 cap screw manufacturers and their company rankings. Here are the top-ranked cap screw companies as of November, 2024: 1.Midwest Acorn Nut Co., 2.Jessen Mfg. Co., Inc., 3.National Cap & Set Screw Company.
Table of Contents
1985-2014: Worked for Alstom Corporation, ABB Corporation, and Gadelius Corporation, designing Jungstrom air preheaters and mechanical design of diamond soot blowers. (ABB Corporation: https://new.abb.com/jp)
2014-2021: Worked as an engineering and project manager at Alvos Inc.
https://www.linkedin.com/in/yoichi-hiroki-92192394/
What Is a Cap Screw?
A cap screw is a bolt with a cylindrical or countersunk bolt head and a hexagonal hole drilled in its upper end face.
Generally, "cap screw," "socket screw," and "hexagon socket head cap screw" are also used as synonyms.
The standards for cap screws are as follows:
- ASME/ANSI B18.3 Hexagon Socket Head Screws
Usage of Cap Screws
Figure 1. Example of cap bolt use (1)
Cap screws are primarily used to mount and secure components on small machines and equipment where space is limited for installation.
To tighten cap screws, use a tightening tool such as a hexagonal wrench (Allen wrench) appropriate for the size of cap screw. Compared to a wrench or a monkey wrench, a hexagonal wrench has the advantage of applying a stronger tightening force with less force and requiring less work space around the bolt when tightening.
Figure 2. Example of cap bolt use (2)
However, since hexagonal wrenches are available in millimeter and inch sizes, care must be taken in selecting a hexagonal wrench. Also, by drilling a counterbored hole slightly larger than the diameter of the cylindrical head of the cap screw and slightly deeper than the height of the head, the cap screw can be installed without the head protruding.
Counterbore holes are drilled in the mounting area so that the bolt head is hidden. The interference between the bolt head and other parts is avoided, resulting in a clean and neat appearance.
Principle of Cap Screws
Cap screws are fastened by means of a screw (in this case, "screw" refers only to the screw shape), the same as an ordinary hexagonal bolt. Cap screws are often used to fasten directly onto a tapped female thread without using a nut.
Instead of inserting a wrench into the bolt head like a hexagonal bolt, a wrench with a hexagonal cross section is inserted into the hexagonal hole and tightened. For this reason, it is necessary to secure a space between the bolt heads and other parts. However, the cap screw tightening tool does not require space outside the bolt head because of the hexagonal wrench, allowing the cap screw to be placed close together.
Used when high tightening force and high strength are required. It is important to select the appropriate material and strength classification for the location and application.
Types of Cap Screws
Figure 3. Type and shape of cap bolts (1)
Cap screws are classified by the shape of the cap screw head and the shape of the hole for the fastening tool.
Types by cap screw head shape are as follows:
- Hexagon socket head cap bolt
- Hexagon socket low head bolts
- Hexagon socket countersunk bolt
- Hexagon socket button bolt
Figure 4. Type and shape of cap bolts (2)
In addition to the hexagonal hole, there is a hexagonal star-shaped groove Torx hole.
Other Information on Cap Screws
Tightening Tools for Cap Screws
Figure 5. Type and shape of cap bolt tightening tool
The most commonly used tools for tightening cap screws are L-shaped Allen wrenches (hexagonal bar wrenches), T-handle Allen wrenches, screwdriver Allen wrenches, and hexagonal bits. Hexagonal wrenches and hexagonal bits have either a "flat" or "ball point" tip shape on the side where the cap screw is inserted.
The shape of the tip of the ballpoint is R-processed at the corner so that the hexagonal wrench can be tightened even when the hexagonal wrench is at an angle.
List of 102 Cap Screw Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- Germany
- India
- Sweden
- United Kingdom
-
-
-
TORIN Products, Inc.
Cap Screws
Manufacturer Overview
TORIN Products, Inc. is a manufacturer of springs and wire forms that was established in 1965 in Nebraska, USA. The company produces various types of springs, including torsion springs that resist twisting, flat springs that can be made in complex shapes, and compression spring models for resisting compressive forces or energy storage purposes. The company also provides additional support, such as contract manufacturing, testing, and finishing services. Some of its notable clients are Raytheon, Ford, and Medtronic.
-
-
-
-
-
The Fastron Co.
Cap Screws
Manufacturer Overview
The Fastron Co., established in 1942, is an ISO 9000-certified US designer and manufacturer of custom cold-headed parts. Their facility is located in Melrose Park, Illinois. The company produces client-specific screws with their own patented technology, Form-Fast, and Clamp-Fast. Further, they provide screw machine conversion services for cold-headed production, the process of moving material to form the desired shape. Their products can be manufactured in various sizes and materials, including steel, brass, silicon, and aluminum, thus they are applied in a wide range of uses, most notably electronics. Additionally, they provide sourcing services for international customers.
-
-
-
-
-
T & T Manufacturing, LLC.
Cap Screws
Manufacturer Overview
T&T Manufacturing was founded in 1977 and is headquartered in Spooner, Wisconsin. The company is a member of the Bretting family of companies which also includes Absolut. While Absolut design, manufactures, and build paper bag machinery and converting equipment, T&T is a designer, manufacturer, and builder of all types of fixtures for industrial applications, specialty machinery, and engineered wood equipment. The company’s product line includes conveying equipment, lift & turns, production machinery, and weld fixtures. The company also provides design, engineering, field service, training, and individual OEM & replacement parts such as custom machinery and engineered wood equipment.
-
-
-
-
-
Strainsert Co.
Cap Screws
Manufacturer Overview
Strainsert began in 1960 and is headquartered in Conshohocken, Pennsylvania. Stransert is a designer and manufacturer of sensors used in research, testing, weighing, and control applications used in aerospace, automotive, marine, and other industrial applications including deep sea and Mars rover expeditions. Strainsert is AS9100 certified. Strainsert’s product lines include force sensing pins and bolts, flat load cells, force sensing tension links, and force measurement systems and instruments. Strainsert also offers a full range of calibration, repair, technical, and engineering services.
-
-
-
-
-
Stock Drive Products/Sterling Instrument - SDP/SI
Cap Screws
Manufacturer Overview
SDP/SI was founded in 1950 and is situated in New Hyde Park, New York. SDPP/SI is a manufacturer of precision gears and high-quality mechanical components used in the aerospace, industrial manufacturing, medical technology, and robotics fields. The company manufactures parts in a variety of materials including alloy steel, stainless steel, bronze, brass, nylon, and titanium. The company also provides coating services such as heat treating, zinc plating, and painting. Additional custom options are available including manufacturing to customer drawings and specifications.
-
-
-
-
-
SAE Manufacturing Specialties Corp
Cap Screws
Manufacturer Overview
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
-
-
-
-
-
Product Components Corporation
Cap Screws
Manufacturer Overview
Product Components Corp was founded by Joseph Saks in 1962 and operates out of Martinez, California. Product Components is a supplier of all types of plastic fasteners. Product Components provides custom molded, stamped, and machine stamped fasteners including screws, nuts bolts, knobs, washers, spacers, stand-offs, balls, and rivets among others. Product Components combines a full plastic fastener line including screws and bolts with engineered machined or molded component services for industrial applications for industries such as electronic, automotive, medical, aircraft, and food. Additional products include panel fasteners, spacers, standoffs, dowels, and other components for panel hardware.
-
-
-
-
-
PennEngineering
Cap Screws
Manufacturer Overview
PennEngineering was founded in 1942 and is headquartered in Danboro, Pennsylvania. Through its brand, PEM, the company is a manufacturer of fastening tools for industries such as aerospace electronics, automotive electronics, medical, EV, and EV charging. The company has branches across the United States, Europe, and Asia through which it manufactures components in the same regions where they are used. The company has data sheets, CAD downloads, and other tools to assist customers in selecting the correct fasteners for their needs. These fasteners vary by technology, characteristics, and type of material onto which they are applied.
-
-
-
-
-
Peninsula Components, Inc.
Cap Screws
Manufacturer Overview
Peninsula Components, Inc., founded in 1982 by William Gardiner, is a solution provider to OEM design engineers by being a manufacturer of products such as cable ties & hardware, connectors, hinges, and thermal products used in medical supplies, automotive, clean energy, and aviation sectors. The company in San Carlos, CA, offers services including inventory management, 3D catalog, design solution, assemblies, and kitting. PENCOM has over 25 logistics sites in North America, Asia, Central America, Europe, and South America, allowing the company to manufacture globally and supply locally.
-
-
-
-
-
P & R Fasteners, Inc.
Cap Screws
Manufacturer Overview
P&R is a manufacturer and supplier of mechanical components and assemblies in New Jersey and was established in 1970. The company provides technical support for designing, developing, producing, and supplying custom fasteners and casting for the OEM market. The manufacturing capabilities of P&R include cold heading, casting, stamping, machining, and injection molding, and the products are crafted using various materials like carbon, alloy, and stainless steel, with aluminum, and brass, and some non-metals like plastic, and rubber. Industries such as Automotive, Medical Equipment, Appliances, Consumer Products, and Aerospace benefit from P&R products.
-
-
-
-
-
Midwest Acorn Nut Co.
Cap Screws
Manufacturer Overview
Midwest Acorn Nut Co. is an American ISO Certified fastener manufacturer founded in 1948 and based in Troy, Michigan. The company specializes in producing nickel-chrome plated steel polished stainless steel screws, nuts, bolts, acorn nuts, and spacers. They primarily serve OEM manufacturers in the automotive industry, additionally offering fasteners kits designed for use with class 8 trucks, motorcycles, and auto engines featuring compatibility with brand name auto manufactures such as Ford, Honda, Cadillac, and Chevrolet among others.
-
-
-
-
-
Jessen Mfg. Co., Inc.
Cap Screws
Manufacturer Overview
Jessen Mfg. Co., Inc. is a manufacturer of screw machine products and CNC turned parts that is headquartered in Elkhart, Indiana and was established in 1923. The company offers a wide range of service lineup including automatic screw machine services, CNC services, castings and forgings, manufacturing engineering, inventory, and turnkey processes. The company also provides secondary services that include broaching, conventional milling, drilling or tapping, and vibratory finishing. The company serves industries ranging from industrial, automotive, electric, and aerospace.
-
-
-
-
-
J.W. Winco, Inc.
Cap Screws
Manufacturer Overview
J.W. Winco was originally founded as Ganter in 1894 in Germany. Winco specializes in parts manufacturing. Parts offerings the operating parts segment including handles, adjusting, and positioning parts; clamping parts segment featuring tensioning, clamping, switching, and levers; and finally the machine parts segment with indexing, locking, mounting, connecting elements, guides, spindles, rollers, magnets, casters, and wheels. Winco’s complete catalog contains over 75,000 standard parts. Winco is also ISO 9001 certified. Winco offers free CAD downloads and technical documentation for many arts.
-
-
-
-
-
Fastening Products Company, Inc.
Cap Screws
Manufacturer Overview
Fastening Products Company, Inc. was established in 1971 and is located in Delaware County, Pennsylvania. The veteran-owned and ISO 9001:2015 certified company serves industries including military OEM, petrochemical, power generation, and mass transit as a manufacturer of many types of military and commercial fasteners. The company’s product lines of fasteners include screws, bolts, nuts, washers, pins, and others. The company customizes products to fit customer specifications and supply them within scheduled delivery dates.
-
-
-
-
-
Elge Precision Machining, Inc.
Cap Screws
Manufacturer Overview
Elge Precision Machining, Inc., established in 1946, is an American manufacturer based in Reading, Pennsylvania, specializing in custom precision machining. Equipped with in-house arsenal of over 48 machines and a wide range of machining tools, ELGE specializes in custom screw machining. They offer both single-spindle Brown & Sharpe and multi-spindle Davenport screw machines. Additionally, ELGE provides close-tolerance computer numerical control (CNC) machining for square, round, and hexagonal bar stocks, as well as precision components using Hardinge, Miyano, and Omni-Turn CNC turning machines. ELGE's precision machining services cater to various industries, such as automotive, construction, electronic equipment, fixture, and solar panel.
-
-
-
-
-
Chicago Nut & Bolt, Inc.
Cap Screws
Manufacturer Overview
Chicago Nut & Bolt is based in East Dundee, Illinois, and is a manufacturer of standard and custom fastener products for industries such as agriculture equipment, military, marine, railroad, and construction equipment. Chicago Nut & Bolt’s custom services include fastener engineering & prototyping, warehousing, rush work, and custom fasteners and bolts. Examples of custom fasteners and bolts in action are the Las Vegas City Center, Golden Gate Bridge refurbishing, Biosphere 2, and the “Son of Beast” roller coaster at King’s Island in Mason, Ohio.
-
-
-
-
-
Chase Fasteners, Inc.
Cap Screws
Manufacturer Overview
Chase Fasteners, Inc. is an Illinois manufacturer of standard as well as custom cold headed and cold formed special fasteners. Founded in 1946 and based in Melrose Park, the company is ISO 9001:2015 certified, and supplies client OEM manufacturers in the automotive, aerospace and defense industries. The company's product portfolio includes solid and semi-tubular rivets and special screws, as well as unfinished blanks fabricated by 6-die, 7-station parts formers in various sizes, materials and configurations. Chase Fasteners, Inc. also offers services ranging from custom design and engineering to testing and quality control.
-
-
-
-
-
Big Bolt
Cap Screws
Manufacturer Overview
Big Bolt is a Bloomingdale, Illinois-based manufacturer and supplier of structural fasteners founded in 1977. The company produces a large selection of studs, bolts, screws, washers, and rods for use in various industrial applications in agriculture, construction, aerospace, and transportation. The company also produces specialty units including metric fasteners sized and measured to metric system standardizations, and ACME fasteners with trapezoidal threadings for use in motion control and power transmission. Custom engineering and secondary services provided by Big Bolt include milling, threading, heat treating, and plating.
-
-
-
-
-
Bay Bolt
Cap Screws
Manufacturer Overview
Bay Bolt was founded in 1981 and is based out of Oakland, California. The company produces fasteners and other components according to ASTM and SAE standards from materials including medium carbon steel, Alloyed steel, and atmospheric corrosion-resistant steel. They are commonly used in construction, waterworks, and underground situations. The company’s spectrum of fastener products includes bolts, nuts, washers, screws, and socket products. The company’s threaded fasteners cover 19 styles of fasteners, many designs of nuts and washers, and over 8 head styles.
-
-
-
-
-
Arlington Fastener Company
Cap Screws
Manufacturer Overview
Arlington Fastener Company was founded in 1969 and is located in Barrington, Illinois near Chicago. The company is a supplier of quality fasteners and through its subsidiary Tuttle Manufacturing, is also a manufacturer of custom fasteners. The company’s offerings include machine screws, sheet metal screws, threaded rods, and thread-forming screws. The company offers over 40,000 unique items in stock including domestic and import fasteners, standard and special. Designs not held in stock can generally be custom manufactured.
-
-
-
-
-
Aavolyn Corp.
Cap Screws
Manufacturer Overview
Aavolyn Corp. was established in 1996, and is a manufacturer and supplier of compressor replacement parts. The company specializes in providing sealing products for customers' need. Their compressor replacement parts include piston and rider rings, rod and wiper packing, pistons and rods, bushings, and pump packings. Additionally, they offer compressor packing assemblies and custom machine parts. This company also provides various services, including natural gas service, specialty gas service, process service, and air services, as well as offering industrial machined parts.
-
-
-
-
-
Eastwood Manufacturing
Cap Screws
Manufacturer Overview
Eastwood Manufacturing is a manufacturer of bolts, nuts, and other fasteners. It is headquartered in Houston, Texas, USA since 2014. The company designs, manufactures, and supplies several types of bolts, nuts, and other fasteners, including hex bolts, socket head cap screws, and carriage bolts. Its products are used in a multiple of industries, including automotive, construction, and manufacturing. The company also offers technical support, installation, and training services to ensure efficient utilization of its products.
-
-
-
-
-
Fair Wind Fasteners
Silicon Bronze Hex Cap Screws
Company Overview
Fair Wind Fasteners is a distributor of stainless steel fasteners and hardware. Established in 2010, the company is headquartered in Newport, Rhode Island, USA. The company's main activities encompass sourcing, stocking, and distributing a comprehensive range of stainless steel fasteners and hardware products. Fair Wind Fasteners specializes in providing durable and corrosion-resistant solutions for marine and industrial applications. Its main services include personalized customer support, quick order fulfilment, and technical assistance. The company serves industries such as marine, construction, and industrial manufacturing, offering dependable and efficient fastening solutions.
-
-
-
-
-
Western States Hardware
Cap Screws
Company Overview
Western States Hardware was founded in La Puente, California in 1968. Western States Hardware serves customers across the United States, offering products in a number of categories including: nuts, screws, & bolts, metric nuts, screws, & bolts, drills & cutting tools, saw blades, electrical connectors, pipe nipples, & pipe fittings, industrial brushes, parker brass fittings & valves, anchors, abrasive pads, belts, & discs, chain & rigging accessories, various tools, valves, staple & nail guns, power & insert bits, and hoses, tubing, & clamps. Altogether, Western States Hardware offers over 750,000 products available.
-
-
-
-
-
Texas Specialty Fasteners
Cap Screws
Company Overview
Texas Specialty Fasteners (TSF) has honorably served as a distributor of hardware as a family-owned company since 1988 and is located in Wylie, Texas. TSF has both standard offering and custom manufacturing services of a wide range of products. These products include screws, nuts, bolts, washers, spacers & standoffs, precision parts, pins, wire handling, inserts, anchors, drill bits, taps, & dies, abrasives & sawblades, safety equipment, and miscellaneous equipment including rivets, handles, catches, and strut accessories.
-
-
-
-
-
Stanley Supply Online
Cap Screws
Company Overview
Stanley Supply, Inc. was founded in 1986 and is based in Long Island City, New York. The company serves the construction, manufacturing, and maintenance industries as a distributor of commercial and residential construction tools and materials. ITW, Powers Fasteners, Diamond Products, and Elco Construction Products are a few of the company’s suppliers. The company sells products in 8 categories including missionary and chemical anchors, gas fastening, drill bits, and safety products.
-
-
-
-
-
SC Fastening Systems
Cap Screws
Company Overview
SC Fastening Systems hailing from Macedonia, OH is an industrial and construction supply distributer that provides value-added services. Product lines include fasteners, concrete anchors, abrasives, cutting tools, safety, janitorial, welding, paints and chemicals, material handling, tools and equipment, electrical, hydraulics and pneumatics, and lifting and rigging. Additionally, SC Fastening Systems offers specialty parts for niche industries such as laundry chute parts and custom hinges. SC Fastening Systems also offers services including inventory management and supply chain solutions, modified parts, kitting, assembly and special packaging, and fire protection products and services.
-
-
-
-
-
Sales Systems Ltd.
Cap Screws
Company Overview
Sales Systems Ltd, formed by William C. Creecy, is a distributor of Market Standard and Military Specification Threaded Fasteners, including nuts, sockets, screws, pipe hangers, and cable ties. The company, headquartered in Portsmouth, VA, has two Mid-Atlantic distribution locations and offers metallurgical and non-destructive testing, mechanical testing, and chemical analysis services. The company is ISO 9001:2008 certified and provides products that fulfill requirements and Sales Systems standards to the petrochemical, automotive, construction, power transportation, and fiber industries.
-
-
-
-
-
S.W. Anderson
Cap Screws
Company Overview
S.W. Anderson Co. was founded in 1926 and is based in Farmingdale, New York. S.W. Anderson is a customer-based manufacturer and distributor of specialty fasteners, standard fasteners, and other OEM products. S.W. Anderson’s product lineup includes numerous segments including inserts, bearings, fasteners, slides, and isolators. S.W. Anderson distributes from many manufacturers including PEM, Stanley, Hutchinson, Acuuride, and Heyco. S.W. Anderson's services include vendor-managed inventory programs, advanced supply chain management, and order management.
-
-
-
-
-
Production Materials, Inc.
Cap Screws
Company Overview
Production Materials Inc. was founded in 1981 and headquartered near Chicago in Wheeling, Illinois. The company is an ISO 9001:2015 certified distributor of fasteners and related components such as nuts, washers, and bolts to manufacturers as well as individuals. The company provides option types such as material, coating, and threading. The company also prototypes and designs parts and offers customization options on many of the parts available. The company also assists customers in the consolidation and standardization of existing parts along with inventory management assistance.
-
-
-
-
-
Pro-Fast
Cap Screws
Company Overview
ProFast is headquartered in Harrisburg, Pennsylvania. ProFast is a distributor for construction supplies. ProFast product categories include drill bits, dock/warehouse gates & rails, fasteners, jobsite supplies, ladders/scaffolding, light duty anchors, masonry, metal building components, roofing equipment, roofing material, safety, power tools, hand tools, generators, caulk/sealant, gas fastening tools, pneumatic tools, powder actuated tools, application tools, roof hatches, and skylight protection. ProFast also offers roofing safety supplies and custom Englert metal roofing options.
-
-
-
-
-
PenCo Industrial Supply, Inc.
Cap Screws
Company Overview
PenCo Industrial Supply, Inc. is based in Chagrin Falls, Ohio. The company is a distributor for industrial supplies with services for supply chain efficiency for corporate customers. The company’s products include abrasives and cleaning agents, safety & protection products, cutting tools, and fasteners. The company’s services begin with vendor consolidation and inventory management services for MRO products. The company offers process improvement and technical services to further refine customers’ purchasing processes. The company’s custom sourcing solutions services provide access to difficult to find and obsolete replacement parts.
-
-
-
-
-
Paramount Fasteners Inc.
Cap Screws
Company Overview
Paramount Fasteners was founded in 1988 and is based in Santa Fe Springs, California. Paramount Fasteners supplies both common and rare industry standard nuts, bolts, screws, and other fastener products. Materials that Paramount Fasteners uses include B16, B8, B8M, B16, B7, 16-4, 17-7, Inconel, Hasteloy, and Monel and provided in 300 series stainless steel, 316 stainless steel, brass, bronze, carbon steel, nylon, and plastic. Paramount Fasters also distributes parts that have painted heads, hot dip galvanized, zinc plated, cad plated, black oxided, chrome plated, and flour coated.
-
-
-
-
-
OneMonroe (Monroe Engineering Products)
Cap Screws
Company Overview
OneMonroe was founded in the 1920s and is located in Rochester Hills, Michigan. OneMonroe is an ISO 9001:2015 and AS9100D certified global industrial manufacturing company serving several types of customers including manufacturers, distributors and catalog-houses across several vertical markets including aerospace/defense, automotive, medical, and transportation. Product lines include adjustable handles, bearings, casters, gaskets, hydraulic clamping, military spec hinges, molded rubber, piano hinges, pins, pull handles, quick release pins, seals, springs, toggle clamps, and various harnesses. Custom manufacturing is also available to meet specific customer needs.
-
-
-
-
-
Nova Fasteners Co., Inc.
Cap Screws
Company Overview
Nova Fasteners Co., Inc. are a distributor of Threaded Fasteners and Anchors since 1948 and is based in New York. The company's inventory consists of anchors that are of different shapes, sizes, and materials for various applications such as there are wedge anchors, sleeve anchors plastic anchors, and so on. There are also numerous types of screws like Machine screws, Concrete screws, Tapping screws, and more including various nuts and bolts for different purposes. You can also get Structural Washers which are heat treated for durability and other Zinc and Nickel plated washers at Nova Fasteners.
-
-
-
-
-
-
-
National Cap & Set Screw Company
Cap Screws
Company Overview
National Cap & Set Screw Co., founded in 1941, is a manufacturer of standard and special socket screws, studs, bushings & spacers, Hex socket items, and threaded rods. The company is a distributor of fastener products such as flat washers, finished & heavy Hex nuts, lock washers, structural carriage bolts, and socket screw products used in the manufacturing, industrial, processing, construction, and electronics sectors. The company in Spring Grove, IL, offers machining services such as broaching, slotting, threading, grooving, and staking with Illinois Manufacturers Association and Midwest Fastener Association certifications.
-
-
-
-
-
National Bolt & Nut Corp.
Cap Screws
Company Overview
National Bolt & Nut Corporation is based in Schaumburg, Illinois. National Bolt & Nut is a distributor of bolts, nuts, and related tools, serving the heavy equipment & construction, mining, transportation, automotive, and alternative energy industries. National Bolt & Nut is ISO 9001 certified. National Bolt & Nut product listings include standard and custom nuts, spacers, and washers with assorted head styles. Other offerings include a variety of screws, pins, and sprockets.
-
-
-
-
-
Mudge Fasteners, Inc.
Cap Screws
Company Overview
Mudge Fasteners Inc., established in 1975 and based in Corona, California, is a distributor of a large selection of fasteners, fastener tools, and adhesives. It has more than 30 stocking warehouses across the United States, including Houston (TX), Nashville (TN), and Kent (WA). The company stocks products from several brands like 3M, Bosch, and DeWalt, and the products can be bought online from several platforms, including Amazon, Sears, and Menards. The company also offers custom parts for customers who want production based on specific requirements. Its other services are customized packaging, kitting, and fabrication services.
-
-
-
-
-
MF Supply
Cap Screws
Company Overview
MF Supply is a stocking distributor for business, industry, and government. MF Supply specializes in fasteners, hardware, and safety supplies. MF Supply product categories include PPE & safety, brands and equivalents, custom made parts, dowel pins, electronic & panel hardware, inserts, metric, Mil-spec & domestic, nuts & washers, pins, precision shoulder screws, rivets & rivetnut inserts, screw driving tools, screws, self-clinching fasteners, socket products, spacers & standoffs, studs, and other products such as sealants, retaining rings, and screw driving tools.
-
-
-
-
-
Metalloy
Cap Screws
Company Overview
Metalloy was founded in 1969 and is based in St. Charles, Illinois. Metalloy is a distributor of industrial and construction supplies. Metalloy offers tube & pipe products, PVF, die sets & plates, die & mold tooling, general tooling, steel storage, and SK hand tools. Tube & tube products include mechanical tubing, stainless steel tubing, and piping. PVF includes piping, fittings, flanges, valves, studded outlets, and machined rings. Die sets & plates include parallels, risers, and steel tools. Die & mold tooling include die punches, die buttons, drill busings, and mold components.
-
-
-
-
-
Kinequip, Inc.
Cap Screws
Company Overview
Kinequip, Inc. was founded in 1946 in Buffalo, NY as a distributor of industrial parts, accessories, and kits. Today these offerings have grown to include motors, compressors, blower systems, clams, pumps, various fittings, gauges, and sensors, as well as pneumatic and high-pressure devices. Kinequip also serves as a distributor for individual device and parts manufacturers. Kinequip additionally offers custom-designed solutions ranging from R&D to unique components and special-made parts, as well as value added designs on demand.
-
-
-
-
-
JT Industries, Inc.
Cap Screws
Company Overview
JT Industries based in Bartlett, Illinois is a distributor of a wide variety of assembly components used in manufacturing applications. Some of the company’s manufacturers include Hellermann Tyton, Indusco, Micro Plastics, and Rotor Clips. The company’s product listings include cable ties, clips, fittings & wire ropes, labels, and socket head cap screws. Each product is available in multiple sizes, colors, and strength configurations. Orders can be made by contacting the company directly or making a request for a quote.
-
-
-
-
-
Interstate Screw Corporation
Cap Screws
Company Overview
Interstate Screw Corporation was founded in Miami, Florida in 1956 as a faster distributor and now operates out of Hialeah, Florida with expanded offerings with shipping offered globally and direct delivers across South Florida. Interstate Screw Corporation offers self-tapping screws, self-piercing screws, self-drilling screws, bolts, cap screws and socket products, machine screws and washers, nuts and threaded inserts, heavy duty screws and hollow wall anchors, tamper resistant and miscellaneous products, eyes, hooks, and blind rivets, as well as penetrating oil and electrical connectors.
-
-
-
-
-
Integratech Distribution
Cap Screws
Company Overview
IntegraTECH Distribution was founded in 1976 in Hudson, New Hampshire, as a distributor of industrial fasteners and electronic components. The company offers a comprehensive product range that includes abrasives, anchors, bolts, cutting tools, nails, nuts, preferred hand tools, rivets, and screws, among others. In addition, the company provides secondary services such as inventory management, kitting, bagging, and assembly. These products and services find applications in various manufacturing processes, construction projects, woodworking, metalworking, and assembly operations across industries. The company caters its services to a wide range of industries, such as construction, woodworking, manufacturing, and metalworking.
-
-
-
-
-
Hi-Tech Fasteners, Inc.
Cap Screws
Company Overview
Hi-Tech Fasteners (HTF) was founded in 1988 and headquartered in Frederick, Maryland. HTF is a distributor of hardware components. HTF offers products in four product types: self-clinching fasteners such as studs and nuts, general fasteners & hardware, inserts, and components. HTF also offers a full line of PEM® Brand products including fasteners for metal sheets and panels, fasteners for BC boards and other non-ductile material, insert for plastics, bonding fasteners, rivet nuts, and fastener installation equipment.
-
-
-
-
-
Great Lakes Industrial Supply Co., Inc.
Cap Screws
Company Overview
Great Lakes Industrial Supply Co. (Great Lakes) is a family business originally founded in 1954, operating out of Dearborn Heights, Michigan. Great Lakes is a distributor for industrial and contracting supplies including cutting tools, mechanic tools, power tools, and safety items. Some of the types of cutting tools Great Lakes offers include drills such as jobbers and roto hammers, taps, reamers, and dies. Mechanic tools include rachets, drivers, and sockets. Power tools include offerings from companies such as Makita and Milwaukee.
-
-
-
-
-
Gibson Stainless & Specialty, Inc.
Cap Screws
Company Overview
Gibson Stainless was founded in 1995 and is headquartered in Greensburg, Pennsylvania. The company is a distributor of electrical fittings, and complete conduit systems in Type 316 SS for industries such as food & beverage, marine, infrastructure, chemical processing, and wastewater treatment and attempts to source as many components as possible from the United States from domestic manufacturers. Most of the company’s product offerings are stainless steel. Product categories include hubs, connectors, clamps, conduit components, anchors, and other fittings.
-
-
-
-
-
Foremost Fastener Company
Cap Screws
Company Overview
Foremost Fastener Co., founded in 1971, is a supplier of standard and semi-standard industrial hardware used for fastening in the manufacturing and construction industries. Blind rivets, edge anchors, hex cap screws, nuts, and washers are among the products offered. Electronic hardware such as hex and round female or male standoffs, round spacers, and socket items such as button, flat, and low heads, socket shoulder screws, and socket set screws are supplied. The Addison, Illinois-based company provides bin stocking, custom bagging, and barcoding services and is a member of the Mid-West Fastener Association.
-
-
-
-
-
Fasco Inc.
Cap Screws
Company Overview
Fasco Inc. was founded in 1978 and is headquartered near Chicago in Alsip, Illinois. The company is a global nut and bolt distributor with locations in the US and Taiwan. The company serves the automotive, transportation, furniture, OEM, and consumer appliance industry among others. Product offerings include fasteners such as bolts and screws, and also parts for steering and brake assemblies, cabling, and pins. The company’s services include Kansan, VMI, and Just-In-Time shipping services to facilitate the efficiency of ordering and customer inventory management.
-
-
-
-
-
Engineered Source, Inc.
Cap Screws
Company Overview
Engineered Source Inc was founded in 1990 and operates out of Orange, California. Engineered Source Inc is a distributor of precision parts for numerous industries including automotive manufacturers, construction, electronics & robotics, fabrication & assembly, farm & agricultural equipment, gun manufacturers, marine & water treatment, medical manufacturers, and aerospace. Examples of specific products include custom internally threaded square pins, stainless steel pins, steel hex nuts, short dog point socket set screws, zinc plated steel material, custom stamped L brackets, painted self-drilling screws, and custom-locating dowel pins for transit gear units.
-
-
-
-
-
Doran Specialties
Cap Screws
Company Overview
Doran Specialties is based in Yorba Linda, California and is a distributor of a variety of fastening hardware and tools. Doran Specialties is 9001:2015 certified. Product categories include AN, MS, NAS, and BAC-certified fasteners including bolts, nuts, fittings, washers, rivets, screws, inserts, and pins. Doran Specialties’s other products include retaining rings, bushings, rods, cables, lanyards, captive screws and nuts, clams, connectors, semiconductors, fuses, keys, machine screws, set screws, spacers and standoffs, springs, wire forms, stampings, switches, washers, and wire. Additional aircraft-specific hardware include hook and loop fasteners, nylon fasteners, O-rings, and plugs.
-
-
-
-
-
Cold Headers, Inc.
Cap Screws
Company Overview
Cold Headers, Inc is a manufacturer and distributor of Socket Screws and their related products since 1962. The company is located in Chicago, United States. Cold Headers' range of products includes shoulder screws, dowel pins, hex keys, and various alloy steel fasteners. The company offers all screws and fasteners in standard and custom sizes and comes in nylon, brass, and bronze materials. Socket screws are also available with spline drives.
-
-
-
-
-
Coburn-Myers Fastening Systems, Inc.
Cap Screws
Company Overview
Coburn-Myers Fastening Systems Incorporated was founded in Trainer, Pennsylvania in 1981. Coburn-Myers manufactures and distributes industrial fasteners and related products. Coburn-Myers focuses both on standard bolts as well as custom designs featuring hundreds of combinations of materials, head styles, heat treatment, secondary operations, and finishes. Types available include hex bolts, heat cap screws, 12-point bolds, and stocked cap screws. Primary product also include buts, fasteners, studs, hand tools, anchors, washers, and other standard products.
-
-
-
-
-
Budgit Hoist
Cap Screws
Company Overview
BudgitHoist.com is headquartered in Forest Lawn, Illinois and is owned and operated by Sievert Electric Service and Sales Company. Sievert Electric is a distributor for Budgit Hoist who is the producer. BudgitHoist produces 1/4 to 3t electric chain hoists, air chain hoists, trolleys, repair parts, and other accessories. BudgitHoist offers additional services such overhead crane design sales, service, and repair, as well as electrical repairs and new construction. Additionally, BudgitHoist offers communication installations, repairs, and maintenance, as well as scoreboard installation repair and construction.
-
-
-
-
-
Bolt Products Inc.
Cap Screws
Company Overview
Bolt Products Inc. was established in 1947 and operates out of San Dimas, California. Bolt Products is a wholesale distributor of fastening tools both domestically and internationally and is ISO 9001:2015 certified as well as RoHS and WEEE compliant. Bolt Products offers many types of products including bolts and plastic fasteners, nuts, lug nuts, nut retainers, cap nuts, bushings, plugs, ball studs, brass inserts, stud receivers, cable ties, cordgrips, liquid-tight flexible conduits, marking systems, and clips.
-
-
-
-
-
Benchmark Fasteners
Cap Screws
Company Overview
Benchmark Fasteners, Inc. is based out of Carol Stream, Illinois. The company is a manufacturer and distributor of various varieties of fasteners and fastener-related items including drill bits, driver bits, and cable ties. The company’s product lines include standard and stainless-steel fasteners and socket screws in imperial and metric measurements. Custom options are also available for screw machine parts, stampings, CNC precision machine parts, and cold-headed parts. Additional services the company provides include poly-bagging for large or varied orders, technical assistance before and after ordering, secondary options customization of threading and plating and same-day shipping for in-stock products.
-
-
-
-
-
Bayou City Bolt & Supply Co., Inc.
Cap Screws
Company Overview
Bayou City Bolt & Supply Company, Inc. is a provider of industrial-type fasteners to various businesses, consumers, and industries around Houston Texas. These industries include energy production, construction, manufacturing & industrial, and the public sector. Bayou City Bolt offers fasteners in a variety of materials including low-carbon steel and aluminum, various coatings, such as zinc or Teflon coating, and special-order materials such as alloy 30 or bronze. In addition to fasteners, Bayou City Bolt also sells studs, drill bits, and other tools and accessories.
-
-
-
-
-
Associated Fastening Products, Inc.
Cap Screws
Company Overview
Associated Fastening Products, Inc. (AFP) was established in the early 1990s in Itasca, Illinois. AFP is a manufacturer and distributor of both standard and special fasteners for all uses, with many customers in the agriculture and gun manufacturing industries. Some of AFP’s product and service offerings include automatic screw machining, CNC services, brass fittings, standard fasteners, CNC machining, laser and waterjet cutting services, custom cold headed fasteners, metal stamping services, standard and special washers, cable ties, hardware kits and bagging, Swiss screw machining, inventory management, large diameter bolts, security fasteners, and wire form products.
-
-
-
-
-
Askew Industrial Corp.
Cap Screws
Company Overview
Askew Industrial Corporation, established in 1957 in Santa Fe Springs, California, is a distributor of production fasteners, C-class components and MRO products. They offer a diverse range of products, including fasteners like bolts, nuts, screws, washers, and pins, essential for construction and manufacturing. Their electrical components encompass connectors, switches, terminals, and wires, catering to power generation, telecommunications, and medical devices. Askew also provides personal protective equipment (PPE) such as safety glasses, gloves, hard hats, and respirators for safeguarding workers across industries. Additionally, they supply janitorial products, including cleaning chemicals, paper items, and mops, ensuring cleanliness in various facilities.
-
-
-
-
-
Armour Screw Co.
Cap Screws
Company Overview
Armour Screw Co., since 1956, has been a distributor of standard and custom fasteners such as screws, nuts, bolts, washers, and rivets made from steel, bronze, aluminum, brass, and titanium and used in appliance, construction, electrical, recreational vehicle, snowmobile, and telecom industries. The company in Elk Grove Village, IL, offers sorting machine services and hand poly bagging, providing customers with hardware kits used for assembly and repair in a product recall situation. Armour Screw Co. is ISO 9001:2000 certified and RoHS compliant.
-
-
-
-
-
Anchor Bolt & Supply Co.
Cap Screws
Company Overview
Anchor Bolt & Supply, Co. was established in 1952 in Odessa, Texas to provide the Permian Basin region of West Texas with a readily available source of threaded fasteners. Today the company is a manufacturer and distributor of fasteners with over 14,000 line items on shelves as well as more that are available through vendors. The company has 11 product lines of fasteners as well as miscellaneous hardware & accessories such as paint, tape, and other materials. In addition to its product lines, the company offers 24-hour free customer service.
-
-
-
-
-
Aero Assemblies, Inc.
Cap Screws
Company Overview
Aero Assemblies was founded in 1932 and is headquartered in Burnsville, Minnesota. The ISO 9001:2015 certified company is a distributor of hardware components used in aviation, construction, marine, and other industries. The company’s primary products include rope, fasteners, fittings, power tools, and aircraft cables. The company’s services include custom wire rope assemblies, push-pull control assemblies, garage door assemblies, and eyelet installation services. The company works with customers to create new tools for many types of needs.
-
-
-
-
-
American Pride Fasteners
Socket Cap Screws
Company Overview
American Pride Fasteners, founded in 2004 and based in Bay Shore, New York, is a manufacturer and supplier of fasteners and machine screws. The company performs Swiss Screw machining and precision CNC manufacturing under one roof. Its product range includes Swiss Screw Machined Components, Threaded Fasteners, Precision Custom components and more. American Pride Fasteners supplies ISO 9001-2015 certified products and services to domestic and global customers in the Automotive, Military, Medical, Aerospace, and Electrical industries.
-
-
-
-
-
KD Fasteners, Inc.
SOCKET CAP SCREWS
Company Overview
KD Fasteners, Inc. was founded in 1987 and headquartered in Addison, Illinois. The company is a fastener manufacturer and distributor, specializing in custom fasteners from such materials as steel, brass, silicon bronze, and other non-ferrous metals, supplying over 100,000 different fastener components. The company has 3 product segments: standard fasteners, standard metric fasteners, and custom fasteners. Custom fastener varieties include studs, washers, machine screws, flange bolts, and many other varieties. The company also offers many plating varieties including zinc, black oxide, waxing, and Magni 565 and 560.
-
-
-
-
-
Superior Industrial Supply
Cap Screws
Distributor Overview
Superior Industrial Supply was founded in 1969 and is headquartered in Saint Louis, Missouri. Superior Industrial Supply is an independent distributor of industrial supplies. Superior Industrial Supply has an inventory of over 20,000 products as well as hundreds of thousands of non-inventory products usually available within 24 hours. Superior Industrial Supply products include fasteners, hose, fittings, electrical supplies, abrasives, brushes, other tools, assorted paints, assorted chemicals, shop supplies, and services. Servies include hydraulic hose assemblies as well as vendor managed inventory services.
-
-
-
-
-
Nickel Systems
Cap Screws
Distributor Overview
Nickel Systems is a Boyertown, Pennsylvania-based distributor of stainless and high-nickel alloy fasteners for use in applications requiring high heat and corrosion resistance. Founded in 1999, the company stocks fasteners in various sizes, grades, coatings, and materials including Duplex 2205, Hastelloy, and KMonel. The company's extensive inventory of fasteners includes washers, hex nuts, and bolts, all thread studs and rods, and socket head products. These supply clients in industries like power generation, water and wastewater, electronics, and chemical processing.
-
-
-
-
-
DistributionNOW
Cap Screws
Distributor Overview
DistributionNow is a brand of NOW Inc. that was founded in 1862 and is headquartered in Houston, Texas. NOW is a distributor for downstream energy and industrial products for petroleum refining, chemical processing, LNG terminals, power generation utilities, and industrial manufacturing operations around the world. NOW provides consumable maintenance, repair, and operating supplies; pipes, valves, fittings, flanges, gaskets, fasteners, electrical products, instrumentations, artificial lift, pumping solutions, valve actuation and modular process, and measurement and control equipmen safety supplies, and personal protective equipment, as well as applied products and applications, including artificial lift systems, coatings, and expendable items. NOW also offers OEM equipment.
-
-
-
-
-
Diamond Needle Corp.
Cap Screws
Distributor Overview
Diamond Needle Corp is the North American distributor for Organ Needle Co., LTD of Japan. Diamond Needle Corp is a supplier of sewing supplies and materials. Individuals and industries served include apparel, automotive, bag closing, bookbinding, embroidery, filters, furniture, home fashions, industrial textiles, mattresses, non-woven, quilting, and other special applications. Diamond Needle has over 100,000 parts and supplies available including needles, replacement parts, scissors, lubricants, chemicals for cleaning and adhesive use, specialized tools, drive belts, crayons, markers, safety aids such as gloves and needle protection, and electric busways.
-
-
-
-
-
Bay Fasteners & Components, Inc.
Cap Screws
Distributor Overview
Bay Fasteners & Components, Inc is a premier global distributor of fasteners. They offer an array of products, including large-sized metric fasteners in zinc, stainless steel, and other material variations. Founded in 1992, Bay Fasteners & Components is Florida-based, with warehouses nationwide. The company is committed to sustainability and stocks a variety of fasteners for eco-friendly industries like wind and solar energy manufacturing.
-
-
-
-
-
BUMAX AB
HEXAGON SOCKET HEAD CAP SCREW
Manufacturer Overview
BUMAX AB was established in 1899 and is located in Åshammar, Sweden is a manufacturer of stainless steel fasteners and associated accessories for various industrial and commercial applications. The company provides stainless steel fasteners, hexagon head bolts & screws, plain washers, stud & stud bolts, and acid-proof screws that have applications in aerospace, automotive, oil & gas, energy, and marine industries. Their products have properties such as magnetic permeability, corrosion resistance, temperature resistance, mechanical strength, and, fatigue strength and are used in architecture, pulp & paper, general engineering, nuclear power, and defense sectors.
-
-
-
-
-
-
-
Nagmani Fastener
Socket Head Cap Screws
Manufacturer Overview
Nagmani Fastener, established in 2007 and based in Ahmedabad, India, is a manufacturer of Hex & Allen bolts, industrial washers, and wood screws. The company also produces other products, such as special fasteners, grub screws, industrial studs and nuts, and self-tapping screws. The products are used in civil engineering and automotive industries. The company manufactures these products in different sizes, dimensions, and shapes. The bushings made are used in fabricating automobile machinery. The products are sturdy, corrosion-resistant, durable, and have dimensional accuracy.
-
-
-
-
-
Caliber Enterprises
Socket Head Cap Screws
Manufacturer Overview
Caliber Enterprises is a manufacturer specialized in nuts established in 2005 in Mumbai, India. The firm offers a wide range of items in their product catalogue. It produces various kinds of bolts, nuts, peek fasteners, rivet guns, parallel connectors, and more. In addition, it manufactures and supplies fasteners materials like stainless, alloy, duplex and carbon steel. The firm holds various PED and ISO 9001:2018 certificates. Its bolts fasteners also meet International Quality Standards (IQS).
-
-
-
-
-
Bhansali Fasteners
Socket Head Cap Screws
Manufacturer Overview
Bhansali Fasteners is a manufacturer included in the Bhansali Group, founded in 1970 in Mumbai, India. The company is specialized in all kinds of fasteners, including but not limited to bolt, nuts threaded rod and coated fasteners. In addition, it manufactures custom fasteners. Its products are made by materials such as stainless, carbon and mild steel, as well as inconel, monel, and more. The firm has participated in successful projects in the power plant, petroleum and gas, aerospace and automobile fields. Its products conform to Indian and international standards, for instance: DIN, ISO, BS, ANSI, and ASTM.
-
-
-
-
Manufacturer Overview
BQF, established in 2013 and based in NCR Delhi, India, is a manufacturer of fasteners. The company offers nylock nuts, hex nuts, self-tapping screws, and special screws. The nuts and bolts by BQF are used in automobile and construction industries. The nuts made are corrosion-free, easy to install, and catered to domestic and international markets. Every product produced by BQF undergoes multiple tests for quality and toughness. The product quality holds ISO 9001:2008 certification.
-
-
-
-
-
Bolt King
Socket Head Cap Screws
Manufacturer Overview
Bolt King, founded in 2006 and based in Telford, United Kingdom, is a manufacturer and supplier of bolts and nuts. The fasteners and bolting produced by the Bolt King are according to customer drawings and meet international standards. The products manufactured are used in oil & gas, subsea, power generation, and automotive sectors. The company products are as per ISO 9001 2015 Lloyds standards. The company also produces hot forged, and CNC turned special fasteners in-house. The materials used in making products are from approved mills in the EU and USA.
-
-
-
-
-
Aashish Steel
Cap Screws
Manufacturer Overview
Aashish Steels, established in 2015 and based in Mumbai, India, is a manufacturer and supplier of steel works. Its main activities include designing, engineering, and construction of steel works such as staircases & handrails, roofing structures, gratings, and more. The company owns a production facility with land area of 15,000 square feet in Singapore. Aashish Steel also manufactures, supplies and exports nuts, steel bolts, washers, and screws in India and around the world.
-
-
-
-
-
Sachiya Steel Internationa
Socket Head Cap Screws
Manufacturer Overview
Sachiya Steel International is a pipe and tube manufacturer established in 2005 in Mumbai, India. The company is specialized in the production of stainless steel products, yet it also makes bolts, nuts, screw, washers and fasteners. Its products are made in different sizes, grades and shapes. In addition, they are used globally, being exported to more than 85 countries. The firm is TUV and ISO 9001:2015 certified. It also provides quotes within 2h from application.
-
-
-
-
-
Craftech Industries, Inc.
SOCKET HEAD CAP SCREW
Manufacturer Overview
Craftech Industries, Inc., established in 1967 and headquartered in Hudson, USA, is a manufacturer of plastic parts. The company’s products include injection molding, CNC machining, and custom solutions, providing low to high-volume production runs. It offers conflict mineral reporting crucial for transparency in sourcing tantalum, tin, or tungsten. The aerospace industry benefits from its corrosion-resistant materials like peek and TPU, while the chemical processing industry relies on its expertise in selecting suitable plastics for harsh conditions. It offers insulating materials like elastomers and fluoropolymers for electronics and semiconductors, which are vital for preventing electrical current leakage and resisting corrosive environments.
-
-
-
-
-
ZAGO
Cap Screws
Manufacturer Overview
ZAGO is a manufacturer of sealing fasteners established in 1993 and based in Newark, New Jersey, USA. The company primarily produces specialized fasteners designed to form a 360-degree seal for preventing fluids, gasses, or contaminants from leaking into or out of equipment. These include seal bolts or screws, switch boots that cover buttons or circuit breakers, and nuts. The company also offers custom product engineering, fabrication, and testing services for its clients with unique projects. It chiefly serves customers in the military, aerospace, and offshore renewable energy sectors.
-
-
-
-
-
Wilson-Garner Co.
Cap Screws
Manufacturer Overview
Wilson-Garner Co. founded Harrison Township, Michigan, in 1948 is a manufacturer of cold formed bolts, screws and studs. The company's product portfolio includes Cold Headed Externally Threaded Fasteners, Self-Locking Place Bolts, and Test Bolts For Torque-Tension Testing. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company also provides services including national distribution, product selection, customized services, technical support and customer service.
-
-
-
-
-
Qualified Fasteners, Inc.
Cap Screws
Manufacturer Overview
Qualified Fasteners, Inc. was founded in 1990 and based in West Babylon, NewYork is a manufacturer of standard and custom fasteners that have applications in various industries. The company serves the navy, nuclear, marine, shipbuilders, and military industries by providing screws, bolts, nuts, washers, and threaded studs that are available with flat, hexagonal, slotted, square, and round heads. They are also capable of supplying military-specification fasteners and have received ASTM, ANSI, and NAS standards.
-
-
-
-
-
Innovative Components, Inc.
Cap Screws
Manufacturer Overview
Innovative Components is a manufacturer of custom plastic injection-molded and CNC-machined parts based in Schaumburg, Illinois. Founded in 1992, the company produces various mixed material products such as clamping knobs, fasteners, thread identifiers, and handles. These are used in industrial equipment, machinery, medical instruments, and office supplies. The company offers a wide range of services to clients including design and prototyping of custom parts or components, mold making for plastic injection purposes, and laser etching of custom fabrications. Innovative Components products are used by companies like Brunswick, Lockheed Martin, and Medtronic.
-
-
-
-
-
Hannes Precision Industry, Inc.
Cap Screws
Manufacturer Overview
Hannes Precision Industry, Inc., founded in 1973 by Jean Schaer, is a manufacturer of precision Swiss Automatic screw machine products based in Connecticut, USA. With over 40 years of experience, they cater to industries like automotive, defense, computer, entertainment, electronics, instrumentation, and telecommunications. As an ISO 9001:2015 Certified, family-run company, they uphold continuous regulation tests using certified gages, precision measuring equipment, microscopes, and optical comparators. The company uses a diverse range of materials in machine construction, including stainless steel, brass alloys, beryllium copper, aluminum, cold rolled steel, tool steel, copper alloys, and plastics.
-
-
-
-
-
Aerospace Manufacturing, Inc.
Cap Screws
Manufacturer Overview
Aerospace Manufacturing was founded in 1986 and headquartered in Wallington, New Jersey. The company is an ISO 9001 and AS9100D certified manufacturer of custom and standard fasteners used in aerospace, industrial, maritime, and other industries. The company offers vertically integrated manufacturing capabilities starting with military, aerospace, and other high standard fasteners including screws, bolts, pins, and studs. Next, custom head styles and recess configurations are offered. Raw materials such as stainless steel and super alloys are available. Processes such as heat treatment and non-destructive testing are then applied according to customer demands.
-
-
-
-
-
ABB Electrification Canada ULC
Cap Screws
Manufacturer Overview
ABB Electrification Canada is a subsidiary of industrial giant, ABB. ABB Electrification serves the data center solutions, oil, gas & chemicals, food & beverage, railway, infrastructure, and microgrids industries with solutions such as smart industry, E-mobility, smart living, smart power, smart cities, and smart distribution. Products include control systems, power electronics, UPS and power conditioning, industrial software, PLPC automation, robotics, power converters and inverters, medium voltage products, metallurgy products, control room solutions, and motors and generators.
-
-
-
-
-
Zygology
Cap Screws
Company Overview
Zygology is a UK-based distributor for technical fastening products. Zygology has ISO 9001 and UKAS quality management accreditation. Zygology’s product line includes breakstem rivet systems, speed fasteners, structural breakstem fasteners, earthing products, sealing plugs, nutserts, jack nuts, versanuts, POP MFX fasteners, lock bolts, installation tools, PEM assembly solutions, placing tools, Tesa tapes, self-locking nuts, and rivet nuts. Zygology offers engineering design and consulting solutions for customer production line problems. Zygology also offers tool rentals and tool repair.
-
-
-
-
-
Leland Industries Inc.
Cap Screws
Company Overview
Leland Industries Inc. was established in 1984 and is based in Canada as a manufacturer of fasteners. The company's range of products include special-purpose fasteners as well as bolts, nuts, screws, and washers, used for various industrial applications in industries such as agriculture, metal buildings, construction, and OEMs. They maintain anti-corrosion coating systems for all products and offers various coating services such as Hot Dip Galvanizing, Phosphate & Oil, and Black Zinc & Dichromate.
-
-
-
-
-
JF Engineering Products LLP
Socket Head Cap Screws
Company Overview
JF Engineering Products LLP is a manufacturer and distributor specializing in industrial fasteners based in Mumbai, India. The company’s portfolio includes different varieties of industrial fasteners such as stainless steel threaded rods, stud bolts, and socket cap screws. Their products find applications in sectors such as oil and gas, chemical, petrochemical, marine and other industries. The company is ISO 9001:2008 certified and adheres to ASTM, ASME, DIN, and UNI standards, serving clients locally and internationally.
-
-
-
-
-
Suraj Metal Corporation
Socket Head Cap Screws
Company Overview
Suraj Metal Corporation started its operations in 1973 in Mumbai, India, as a prime manufacturer and supplier of alloy stainless and nickel products. The company is devoted to provide customers with global steel procurement services. They produce industrial goods that are durable, and have the necessary proportions. Round Bars, Forging, and Fasteners are just a few of this organization's Stainless Steel and Nickel Alloys products. They are always faithful to their ideals, which are congruent with ethical business methods.
-
-
-
-
-
WURTH GROUP
Cap Screws
Company Overview
Würth Industry North America is the North American Branch of Würth Group, originally founded in Germany in 1945. The company is a global designer, manufacturer, and wholesaler of fastening components, materials, and inventory management systems for industries including automotive, manufacturing, and construction. The company offers custom VMI programs, Kanban storage systems, kitting & assembly, 3D printing, and other services to facilitate and expedite customer orders and procurement of supply chain components. The company also offers CAD specialty services including diagrams for hundreds of bolts, nuts, pins, and other fasters.
-
-
-
-
-
Wharton Hardware and Supply
Cap Screws
Company Overview
Wharton Hardware and Supply is a family-operated business that was founded in 1948 in Philadelphia, Pennsylvania and has branched to several locations across the United States. Wharton operates in 3 segments: products, sales & rental, and services. The products segment includes road & bridge concrete accessories, safety equipment, abrasives and cutting tool products, plumbing-related products, topological products, fasteners, bits and drill equipment, as well as power tools. The sales & rental segment offers heavy duty construction equipment from major brands. The services segment includes repair and testing for tools and equipment.
-
-
-
-
-
Toolsavings, LLC
Cap Screws
Company Overview
Toolsavings, LLC is based in Chicago, Illinois and is a supplier and distributor of industrial supplies for both individual and corporate customers. Toolsavings offers an extensive catalog spanning over 10 categories such as Cutting Tools, Toolholding, Air and Power Tools, Fasteners, and Measuring Instruments from brands such as 3M and Destaco. Cutting tools include drills, reamers, and saws. Toolholding includes boring heads, retention knobs, and sawholders. Air and Power Tools includes blow guns, grinders, and tire gages. Fasteners includes screws and pins. Measuring instruments includes calipers, microscopes, and squares.
-
-
-
-
-
Threaded Screw Products Co., Inc.
Cap Screws
Company Overview
Threaded Screw Products Co., Inc. is based out of Thorndale, Pennsylvania. The company is a distributor of various fastener products to commercial and individual customers. The company has an inventory of over 400,000,000 fasteners and related parts and offers packaging to customer’s order specifications, in both small quantities and wholesale volumes. The company’s fastener offerings include screws, nuts, bolts, and washers in several materials including steel, stainless, brass, aluminum, and alloys. The company offers products in various threading, point styles, and head styles across materials.
-
-
-
-
-
Tank Truck Service & Sales, Inc.
Cap Screws
Company Overview
Tank Truck Service & Sales, Inc. has been designing and building tank trucks since 1948 and is based in Warren, Michigan. The company is a manufacturer, assembler, and distributor of tank trucks and trailers. The company's product offerings include parts and components including tank truck equipment, bulk plant and storage tank equipment, dry break or dry disconnect fittings, valves, hose, hose reels, meters, swivel joints, gaskets, and pipe sealants. Tank truck offerings include refined fuel trucks and trailers, LGP trucks, and specialty tank trucks. Additionally, The company offers metalwork, equipment work, dot testing, paintwork, and sensor repairs.
-
-
-
-
-
SRI-Supplies For Racing & Industry, LLC
Cap Screws
Company Overview
SRI Supplies was originally founded in Concord, North Carolina in 1997. SRI stands for Supplies for Racing & Industry. SRI is a distributor and outsourcer to many top auto racing teams including Hendrick Motorsports and Team Penske as well as the NASCAR Technical Institute. However, SRI also sells to individuals. SRI supplies many types of products used in not just automotive, but other industrial uses as well as domestically. Product types include abrasives, adhesives, brushes, chemicals, fasteners, lubricants, cleaning systems, paint and related hardware, protective wear, towels, silicones, tapes, threadlockers, tools, and welding.
-
-
-
-
-
Nationwide Industrial Supply
Cap Screws
Company Overview
Nationwide Industrial Supply was founded in Youngstown Ohio in 2006. Nationwide Industrial Supply is a distributor of industrial equipment, serving both public and private institutions and companies in the United States and overseas. Some of Nationwide’s offerings maintenance, operating products, safety supplies repair products, storage equipment, tubing, pipe, and hose material, electrical and plumbing supplies repair and operating products, storage equipment, safety supplies, material handling equipment, shelving, and work platforms.
-
-
-
-
-
Joseph Fazzio, Inc.
Cap Screws
Company Overview
Joseph Fazzio, Inc. was established in 1965 as a family-owned business and is based in Glassboro, New Jersey. Joseph Fazzio is both a distributor and servicer of industrial tools, machinery, and materials. The company's product offerings include building materials, fasteners, fleet products, hydraulics and mechanical components, and tool storage. Additional types of products include sheet metals, heavy machinery, and specific bolt, nut, screw, and spacer selections. The company's surplus division also offers a line of used products for sale across product lines.
-
-
-
-
-
G-Fast Distribution Inc
Cap Screws
Company Overview
G-Fast has its roots back to 1989 and is based in Chicago, Illinois. G-Fast is a distributor and custom manufacturer of machine tools and equipment. Product offerings include bolts, screws, nuts, rivets, washers, pins, springs, wireforms, retaining rings, clamps, clips, pins, handles, electronic access tools, hinges, knobs, latches, panel fasteners, quick release pins, and wire management. Parts are available across several standards and materials. G-Fast’s services include custom specialized bolts, screws, and nuts, contract manufacturing, CNC machining, and cold heading.
-
-
-
-
-
Fast-Rite International, Inc.
Cap Screws
Company Overview
Fast-Rite was founded in 1992 and is headquartered in Glendale Heights, Illinois. The company is an ISO 9001:2015 certified manufacturer and distributor of fasteners, abrasives, tools, and accessories to manufacturing and other industries. The company has multiple distribution centers throughout the United States, as well as full-service sales, warehouse, and production facilities in both Mexico and Asia. The company offers rite-stock programs and optimization options. Rite-stock programs include customer-managed inventory, total VMI, virtual inventory, Kanban, and JIT programs. Optimization programs include assembly, automation, and robotics solutions.
-
-
-
-
-
Aspen Fasteners Inc.
Cap Screws
Company Overview
Aspen Fasteners was founded in 1961 and headquartered in Las Vegas, Nevada. Aspen Fasteners is a distributor for industrial fasters. Aspen Fasteners offers an extensive line in both metric and inch standards of anchors, bolts, nuts, screws, washers, rings, pins, pipe plugs, rivets, inserts, rods, studs, spacers, standoffs, panel fasteners, and tools including adapters, drivers anchor setting tools, keys, measuring tools, screwdriver insert bits, and screwdriver power bits. Material types include aluminum, brass, copper, iron, lead alloy, monel nickel copper alloy, nylon, phosphor bronze, plastic, silicon bronze, stainless steel, steel, and zinc.
-
-
Cap Screw Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Midwest Acorn Nut Co. |
9.3%
|
| 2 | Jessen Mfg. Co., Inc. |
7.0%
|
| 3 | National Cap & Set Screw Company |
7.0%
|
| 4 | P & R Fasteners, Inc. |
7.0%
|
| 5 | The Fastron Co. |
7.0%
|
| 6 | SAE Manufacturing Specialties Corp |
7.0%
|
| 7 | Fastening Products Company, Inc. |
4.7%
|
| 8 | Chase Fasteners, Inc. |
4.7%
|
| 9 | Elge Precision Machining, Inc. |
4.7%
|
| 10 | National Bolt & Nut Corp. |
4.7%
|
Derivation Method
The ranking is calculated based on the click share within the cap screw page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- T & T Manufacturing, LLC.: 85
Newly Established Company
- Nagmani Fastener: 2007 (17 years ago)
- Innovative Components, Inc.: 2006 (18 years ago)
- Bolt King: 2006 (18 years ago)
Company with a History
- BUMAX AB: 1660 (364 years ago)
- RAMPA TEC Inc.: 1907 (117 years ago)
- Jessen Mfg. Co., Inc.: 1923 (101 years ago)
Cap Screw Manufacturers in United States
*Including some distributors, etc.
- TORIN Products, Inc.
- The Fastron Co.
- T & T Manufacturing, LLC.
- Strainsert Co.
- Stock Drive Products/Sterling Instrument - SDP/SI
- SAE Manufacturing Specialties Corp
- Product Components Corporation
- PennEngineering
- Peninsula Components, Inc.
- P & R Fasteners, Inc.
- Midwest Acorn Nut Co.
- Jessen Mfg. Co., Inc.
- J.W. Winco, Inc.
- Fastening Products Company, Inc.
- Elge Precision Machining, Inc.
- Chicago Nut & Bolt, Inc.
- Chase Fasteners, Inc.
- Big Bolt
- Bay Bolt
- Arlington Fastener Company
- Aavolyn Corp.
- Eastwood Manufacturing
- Fair Wind Fasteners
- Western States Hardware
- Texas Specialty Fasteners
- Stanley Supply Online
- SC Fastening Systems
- Sales Systems Ltd.
- S.W. Anderson
- Production Materials, Inc.
- Pro-Fast
- PenCo Industrial Supply, Inc.
- Paramount Fasteners Inc.
- OneMonroe (Monroe Engineering Products)
- Nova Fasteners Co., Inc.
- Nine Fasteners, Inc.
- National Cap & Set Screw Company
- National Bolt & Nut Corp.
- Mudge Fasteners, Inc.
- MF Supply
- Metalloy
- Kinequip, Inc.
- JT Industries, Inc.
- Interstate Screw Corporation
- Integratech Distribution
- Hi-Tech Fasteners, Inc.
- Great Lakes Industrial Supply Co., Inc.
- Gibson Stainless & Specialty, Inc.
- Foremost Fastener Company
- Fasco Inc.
- Engineered Source, Inc.
- Doran Specialties
- Cold Headers, Inc.
- Coburn-Myers Fastening Systems, Inc.
- Budgit Hoist
- Bolt Products Inc.
- Benchmark Fasteners
- Bayou City Bolt & Supply Co., Inc.
- Associated Fastening Products, Inc.
- Askew Industrial Corp.
- Armour Screw Co.
- Anchor Bolt & Supply Co.
- Aero Assemblies, Inc.
- American Pride Fasteners
- KD Fasteners, Inc.
- Superior Industrial Supply
- Nickel Systems
- DistributionNOW
- Diamond Needle Corp.
- Bay Fasteners & Components, Inc.
Global Distribution of Cap Screw Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
70 | 84.3% |
India
|
8 | 9.6% |
United Kingdom
|
2 | 2.4% |
Sweden
|
1 | 1.2% |
Germany
|
1 | 1.2% |
Canada
|
1 | 1.2% |
