6 Try Plate Manufacturers in 2024
This section provides an overview for try plates as well as their applications and principles. Also, please take a look at the list of 6 try plate manufacturers and their company rankings.
Table of Contents
What Is a Try Plate?
A try plate is a type of jig used in machining. It is an L-shaped or cube-shaped jig used to attach the product to be machined at right angles to the base surface.
Each face is made of a quality flat surface with no unevenness, and the L-shaped part or cube has a precise 90-degree angle.
A try plate has tapped holes, through holes, and long holes for attaching jig components such as clamps and workpiece guides, allowing for a wide variety of processing on various products.
Uses of Try Plates
Try plates are used for the following applications:
- Beveling the Workpiece on the Surface Plate
When drilling or tapping a workpiece with a drill plate, try plates are used to mark the hole positions in advance.
The workpiece to be machined is set at the exact 90-degree angle made by the surface plate and try plates, and a line is drafted with a needle or the like, taking the dimensions from the edge of the workpiece. - Use for Horizontal Machining Sensor Jigs
Because the spindle of a horizontal machining center is horizontal, the product to be machined must be mounted parallel to the spindle. Therefore, the try plate jig is used to clamp the workpiece for drilling, milling, etc.
Principles of Try Plates
Try plates are used as a jig for machining products on a horizontal machining center.
Since the quality of the workpiece clamped on the try plates is greatly affected by the accuracy of the try plates, the structure of the try plates has important principles and principles.
The spindle of a horizontal machining center faces parallel to the floor and is perpendicular to the workpiece fixed to the try plates jig facing it.
If the relationship between the spindle and the workpiece deviates from 90 degrees, the flat surface of the workpiece will be machined at an angle when milling, for example.
As a countermeasure, the try plates itself can be milled on a horizontal machining center.
In this way, the workpiece mounting surface of the try plates are finished to the same accuracy as the spindle.
However, in a production line using a pallet changer, one try plates jig may be mounted on several horizontal machining centers.
Since each of these horizontal machining centers has a slightly different spindle orientation, it is not possible to finish the try plates surface to fit all of them.
In such cases, the jig's swivel function of the horizontal machining center is used to tilt the origin intentionally and process the work perpendicularly.
List of 6 Try Plate Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- Japan
-
-
-
Bunty LLC
Jigs
Manufacturer Overview
BUNTY LLC, established in 2000, is an AS9100D, ISO 9001:2015 and CVMSDC certified manufacturing company that services the automotive, aerospace, energy and medical industries based in the US. The company’s customers include the largest tire manufacturer in the world, the transmission supplier to a large Japanese automaker, and Tier I manufacturers in automotive shocks, brakes, drive trains, and mirror assemblies. It also provides stainless steel parts for the food processing industry that meet FDA standards. It has evolved and became a full-service custom machined, forged and cast metal parts fabrication enterprise, with domestic and overseas manufacturing, warehousing and inspection facilities.
-
-
-
-
-
-
-
Obishi Keiki Seisakusho
Cast Iron Precision Angle Plate
Manufacturer Overview
Obishi Keiki Seisakusho, established in 1949 in Osaka, Japan, is a manufacturer of precision test and measurement equipment. The company specializes in manufacturing automatic measuring equipment, ultra-precision masters, precision spirit levels, surface plates, angle plates, and deflection testers. These efficient equipment are used in multiple industries such as automotive, electronics, aerospace, and research and development for the purpose of precise measurements, quality control, and testing the performance of the products. The precision equipment is made of granite and ceramics, ensuring efficient handling and performance in harsh environments such as heat.
-
-
-
-
-
SUPER TOOL co. ltd.
LIFTING CLAMPS FOR CONCRETE
Company Overview
SUPER TOOL Co., Ltd., established in 1918 in Japan, is a manufacturer of general and specialized tools for building and bridge construction, civil engineering, shipbuilding, and similar industries. The company offers an extensive line of specialty tools used by tradespeople and skilled workers that includes ratchet wrenches, clamps, portable cranes, jig clamping tools, piping tools, and more. SUPER TOOL Co., Ltd. also offers custom tool design and production as well as custom machinery production for commercial clients.
-
-
-
-
-
Aircraft Spruce
Two-Lug Double Wing Standard Nut Plate Jig
Company Overview
Aircraft Spruce, established in 1965 and headquartered in Corona, California, serves as a supplier and distributor of certified and homebuilt aircraft supplies. The company's product range includes Garmin avionics, aircraft engines and parts, aviation headsets, landing gear components, aircraft batteries, and more. The company is known for supplying components for a diverse range of homebuilt aircraft, such as the Lancair, Vans Aircraft, Cozy, Starduster, and Europa. It also provides factory-built parts for aircraft manufacturers like Cessna, Piper, Beech, and Mooney.
-
-
-
-
-
Vortool Manufacturing
Jigs
Company Overview
Vortool Manufacturing is a tool and die designer and manufacturer based in Surrey, British Columbia, Canada. The company primarily produces sheet metal stamped parts using SolidWorks 3D CAD technology. These products include extrusion hole punching presses and tools, progressive metal stamping dies, and specialty jigs and fixtures manufactured to customer specifications. It also offers wire EDM cutting as well as CNC milling and machining services. The company primarily serves clients in the automotive, aerospace, and electronics industries.
-
-
Try Plate Manufacturer Ranking
*Including some distributors, etc.Number of Employees
- Obishi Keiki Seisakusho: 70
Newly Established Company
- Bunty LLC: 2000 (24 years ago)
- Aircraft Spruce: 1956 (68 years ago)
- Carr Lane Manufacturing: 1952 (72 years ago)
Company with a History
- Obishi Keiki Seisakusho: 1949 (75 years ago)
- Carr Lane Manufacturing: 1952 (72 years ago)
- Aircraft Spruce: 1956 (68 years ago)
Try Plate Manufacturers in United States
*Including some distributors, etc.
Global Distribution of Try Plate Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
2 | 33.3% |
Japan
|
2 | 33.3% |
Canada
|
2 | 33.3% |
