12 POM Bushing Manufacturers in 2024
This section provides an overview for pom bushings as well as their applications and principles. Also, please take a look at the list of 12 pom bushing manufacturers and their company rankings. Here are the top-ranked pom bushing companies as of April, 2024: 1.Jiashan Gangping Machinery Co., Ltd., 2.JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD, 3.JIAXING TISEN SLIDING BEARING CO.,LTD.
Table of Contents
What Is a POM Bushing?
POM bushings are molded bushings. Taking advantage of the self-lubricating properties of Duracon®, they are used to support and secure rotating or linearly moving shafts.
Compared to (ball) bearings, POM bushings have advantages in terms of cost, ease of installation, lightweight, and space saving.
Duracon® is a registered trademark of Polyplastics Corporation and is one of engineering plastics called POM (polyacetal resin). Being a crystalline resin, it has a very low coefficient of friction and self-lubricating properties.
Applications of POM Bushings
POM bushings are applicable to any movable shaft because they allow rotation and linear motion between the shaft and housing. They are used to secure the shafts of mini 4-wheelers and toys, as well as the movable shafts of various parts of household appliances and automobiles.
POM bushings have higher sliding resistance and lower load capacity than bearings, but they are also available at low cost, require little additional space, and simplify installation and maintenance, such as fitting and lubrication. The POM bushing is a simple and cost-effective solution.
Principle of POM Bushings
Plastic with a higher crystallinity will have a lower coefficient of friction. Duracon® (POM) is a highly crystalline resin, which has a very low coefficient of friction and self-lubricating properties. Therefore, POM bushings can be used without lubrication even though they are sliding parts.
On the other hand, its disadvantages include flammability due to the presence of oxygen in its molecular structure, low weather resistance, poor adhesiveness, and inability to bond using adhesives (welding is possible), and resistance to strong acids. Therefore, care must be taken when selecting materials for use in explosion-proof designated areas, outdoors, or in environments where strong solvents or cleaning agents are used.
Regarding heat resistance, Duracon® can be used at temperatures up to 100°C without deformation, so there is no problem with hot water, but when used in automobiles, it must be used away from the engine, which is the heat source.
List of 12 POM Bushing Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- China
- Japan
-
-
-
Jiashan Gangping Machinery Co., Ltd.
POM Bushing
Manufacturer Overview
Jiashan Gangping Machinery Co. Ltd. was founded in 2012 and is based in Shanghai, China, and is a manufacturer of industrial equipment and machinery for various applications. The company's product folio includes meat processing equipment, hydraulic lifts, concrete mixers, and forklift trucks that are essential in the automotive, agriculture, food processing, construction, and, transportation industries. The company has ISO9001: 2015 quality management system certification and offers home appliances such as air conditioners, vacuum cleaners, and, washing machines as well as dental equipment, X-ray equipment, and operating tables for the medical sector.
-
-
-
-
-
Bushing MFG
POM Composite Bushing
Manufacturer Overview
Bushing MFG, founded in Jiaxing, Zhejiang, in 2006 is a manufacturer of self-lubricating bearings. The company's product portfolio includes Plain Bearings, Self-lubricating sleeve bearings that excel in low-speed and high-load applications, flanged self-lubricating bearings suitable for both radial and thrust loads, Self-lubricating thrust bearings designed to handle axial loads and Custom Bearings. Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense.
-
-
-
-
-
JIAXING TISEN SLIDING BEARING CO.,LTD
POM Bearing Bush
Manufacturer Overview
JIAXING TISEN SLIDING BEARING CO., LTD., located in Jiaxing, Zhejiang Province, China, is a manufacturer of plain bearings, sliding bearings, oilless bearings, self-lubricating bearings, and composite bearings. The company’s factory has advanced production technology and equipment, with outstanding enterprise management concept and technicians. Their products have the advantages of low noise, wear-resistant and long-lived, applying in the fields such as all kinds of machines, electric tools, instrument and apparatus, automobile, and motorcycles. They provide products to both domestic and overseas customers and mainly exports to Russia, Ukraine, Italy, South Korea, Canada, United States, United Kingdom.
-
-
-
-
-
Zhejiang Waxing Electromechanical Co., Ltd.
POM Bushing
Manufacturer Overview
Zhejiang Waxing Electromechanical Co., Ltd., established in 2000 as Linqing Shengli Factory, is based in Zhejiang, China, as a manufacturer and supplier of various types of bearing. The company offers various types of bearing including Deep Groove Ball Bearings, Cylindrical Roller Bearings, Tapered Roller Bearings, Angular Contact Bearings, Thrust Ball Bearings, among others. These products are utilized in many industries such as automobile industry, agriculture industry, textile industry, and plastic industry as important internal components of various machineries. The company also offers custom requests to fulfill customers with special quality requirements and specifications.
-
-
-
-
-
Hirosugi-Keiki Co., Ltd.
POM Bushing
Manufacturer Overview
Hirosugi-Keiki Co., Ltd, founded in 1980 and headquartered in Kawasaki, Kanagawa, Japan, is a manufacturer of electronic parts and mechanical parts. Its main products encompass spacers, terminals, plastic washers, plastic bushings, screws, pin headers, and mechanical parts like long pipes, precision shafts, and fiber tubes. These components are crucial for ensuring proper electrical connections and efficient operations in various electronic applications, as well as for the structural integrity, movement, and precision of various types of machinery and equipment. The company holds ISO 9001 and ISO 14001 certifications and established its Yokohama plant in 2012.
-
-
-
-
-
Jiashan PVB Sliding Bearing Co.,Ltd
POM Bushing
Manufacturer Overview
Jiashan PVB Sliding Bearing Co., Ltd is a manufacturer of self-lubricating bearings in China. The company provides Solid, Graphite, and Wrapped Bronze Bearings along with various types of Bushings such as PTFE Lined Bushing, POM, Bimetal, Sintered Bronze, Plastic, and more. There are other kinds of bearings as well like Filament Wound Bearings, Ball Cages, Spherical Plain, and Steel Copper Alloy, and these products have numerous uses in the Automotive, Agricultural, Medical Equipment, Paper/wood/pulp industry, and Domestic appliances to name a few.
-
-
-
-
-
JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD
POM Bushing
Manufacturer Overview
Jiaxing Viiplus International Trading Co. Ltd., established in China in 2016, is a manufacturer of self-lubricating bearings. The company's range of products includes sleeve bearings, flanged bearings, thrust bearings, and custom bearing solutions in various sizes and textures. Its products are used in industries such as automotive and transportation, industrial manufacturing, aerospace and defense, marine and renewable energy. The company exports its products to North America, South America, Europe, and, the Middle East.
-
-
-
-
-
VIIPLUS Bearing Company
POM Bushings
Manufacturer Overview
VIIPLUS Bearing Company, established in 2016 and headquartered in Zhejiang, China, is a manufacturer that specializes in providing self-lubricating bushings and oilless bearing materials. The company offers a wide range of products, including plain bearings, wrapped bronze bearings, bronze bushings, and bimetal bearings. It also offers thrust washer pom self-lubricating holes, self-lubricating bronze bushing, solid bronze bearings, and plugged graphite bronze parts couplings. Its products are dirt-resistant, insertable at high temperatures, and made with solid lubricant bronze material. The company has achieved ISO 9001:2015 and RoHS Certification. It serves industries such as automotive, machinery and equipment, electronics, construction, and more.
-
-
-
-
-
Nippon Chemical Screw & Co., Ltd
Bushing
Company Overview
Nippon Chemical Screw & Co. Ltd., established in 1965 and based in Tokyo, Japan, is a manufacturer and supplier of plastic fasteners. The company specializes in diverse range of plastic screws and components, including micro screws, bolts, spacers, and various molds, like injection and press molds. It serves diverse industries such as semiconductors, marine, and electronics, handling an array of materials ranging from engineering plastics to advanced PPS and PEEK for diverse applications. The company also offers custom parts development, from initial design to mold creation and final injection molding.
-
-
-
-
-
-
-
-
-
DMS SEALS TECHNOLOGY CO.,LIMITE
POM Bushing
Distributor Overview
DMS SEALS TECHNOLOGY CO.,LIMITE, founded in China in 2008, is a supplier of O Ring and Hydraulic Seals. The company offers O-Rings in various materials, sizes, and configurations and hydraulic seals including piston seals, rod seals, wipers, and wear rings used for optimal performance in hydraulic systems, ensuring leak-free and efficient operation. It serves a diverse range of industries, including but not limited to automotive, aerospace, industrial manufacturing, hydraulics, and more.
-
-
POM Bushing Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Jiashan Gangping Machinery Co., Ltd. |
40.0%
|
| 2 | JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD |
20.0%
|
| 3 | JIAXING TISEN SLIDING BEARING CO.,LTD |
20.0%
|
| 4 | Bushing MFG |
20.0%
|
Derivation Method
The ranking is calculated based on the click share within the pom bushing page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- DMS SEALS TECHNOLOGY CO.,LIMITE: 120
- Hengshui Qiangze Super Wear-resistant Plastic Products Co., Ltd.: 85
- Hirosugi-Keiki Co., Ltd.: 44
Newly Established Company
- JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD: 2016 (8 years ago)
- Hengshui Qiangze Super Wear-resistant Plastic Products Co., Ltd.: 2010 (14 years ago)
- Jiashan PVB Sliding Bearing Co.,Ltd: 2006 (18 years ago)
Company with a History
- Hirosugi-Keiki Co., Ltd.: 1980 (44 years ago)
- Jiashan PVB Sliding Bearing Co.,Ltd: 2006 (18 years ago)
- Bushing MFG: 2006 (18 years ago)
Global Distribution of POM Bushing Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
China
|
8 | 88.9% |
Japan
|
1 | 11.1% |
