All Categories
History
This section provides an overview for id clamps as well as their applications and principles. Also, please take a look at the list of 9 id clamp manufacturers and their company rankings. Here are the top-ranked id clamp companies as of August, 2025: 1.Imao, 2.Rovi Products Inc., 3.Wixroyd Group Ltd.
Table of Contents
An ID clamp is a cutting jig. After centering a workpiece with a hole for location, the clamping jig secures the workpiece from the inside by the wall of the hole. The mouth part of the clamp is divided into several parts, which are spread by the clamping operation to fix the ID clamp on the inside diameter of the workpiece. By clamping the workpiece only from the inside, interference between the clamping jig and the machining tool is avoided, making it suitable for clamping workpieces with many machining points, multiple-piece machining, and thin-walled parts.
The clamp drive system can be manual, pneumatic, or hydraulic, and the easy-to-use manual ID clamp is widely used.
Since the workpiece location hole is used for clamping, highly accurate positioning is possible.
Since cast parts have large tolerances on the periphery, ID clamps that use a hole for locating are often used. ID clamps are also used when there is no clamping point on the periphery of the workpiece, when the clamping fixture interferes during machining, when the workpiece is thin-walled, or when a special jig is used to clamp numerous pieces.
Some ID clamps can also be clamped from the outside of the workpiece by replacing the (clamping) clamp. This makes it easy to clamp even complex-shaped workpieces and is convenient for use in multi-cavity and dive machining.
When machining the top or side surface of a workpiece, the machining tool may interfere with the clamping jig when clamping in the vertical or horizontal direction. In this case, the use of ID clamps, which do not clamp the outer surface of the workpiece, eliminates the interference and allows the outside of the workpiece to be machined freely.
When many workpieces need to be clamped at once to increase productivity, the clamping jig takes up a lot of space, limiting the number of clamps that can be installed. With the compact ID clamps, a large number of workpieces can be clamped, allowing continuous machining in a single setup.
For thin-walled workpieces, the use of a standard 3-jaw chuck may cause clamping distortion due to uneven clamping force. In this case, the use of an ID clamps is suitable. ID clamps have a finely divided clamping jaw that presses evenly on the ID of the workpiece, thus minimizing workpiece distortion.
ID clamps have the advantage that the workpiece can be positioned precisely at the same time if clamped. The holes used for clamping are highly accurate, and by tightening the screw, the mortise part of the mouthpiece opens and clamps from the inside, allowing repeated positioning with high accuracy.
*Including some distributors, etc.
Sort by Features
Sort by Area
Northwestern Tools is a machine tooling manufacturer and supplier founded in 1942 in Dayton, Ohio. The company's diverse catalog includes clams, workholding, fasteners, linear motion devices, valves, and more. It includes multiple ready-to-ship items from brands like Elsea, Kipp and Jergens. The company produces specialized tooling, clamping and work-holding components, spring and ball plungers, fasteners, thread repair inserts, knobs and handles and hoist rings. Its products are used in the aerospace, medical, fastener, and lifting and material handling industries.
Rovi Products Inc., established in 1965, is a manufacturer and supplier of work-holding products and machine shop accessories based in California, USA. The company offers a comprehensive range of workholding products, including chuck jaws, collect accessories, collet chucks, and collet fixtures. These products are essential for securely holding workpieces during machining processes. The company also offers cutting tools, expanding collets, indexers, and accessories such as coolant nozzles, mist collectors, mandrels, tool holder bushings, and more. The company ships its products daily to customers throughout and abroad.
Jergens, Inc. established in Cleveland, OH in 1942 is a manufacturer of Workholding, Lifting and Specialty Fasteners products. Their product portfolio includes clamps, vises, fixtures, and chucks, used for precise and stable workpiece positioning in machining and assembly processes. The company serves industries Renewable Energy, Mining and Exploration, Marine and Offshore, Electronics and Semiconductors and Telecommunications. The company has ISO 9001:2015 and AS9100:2016 certification and have global delivery and customer support..
Shars Tool is an American wholesale distributor of industrial equipment and machinery that was established in 1978 in Saint Charles, Illinois. The company stocks various hand and power tools, abrasives, and cutting tools, as well as machinery like mills and lathes. They also offer material handling equipment like carts and bins, as well as safety accessories like goggles and gloves. Shars Tool chiefly serves client companies and businesses in the metalworking, DIY, home maintenance, and hobby markets, as well as select e-retailers such as LittleMachineShop.com.
Mitee-Bite Products LLC, founded in 1986 and based in Center Ossipee, New Hampshire, is a manufacturer of high-density, profile clamping products such as vacuum systems, Vise jaws, manual actuators, and replacement parts for CNC machining. The company’s products include collet wrenches, PSI vacuum gauges, locating pins, and long-length serrated grips. The products are used in manufacturing, construction, fabrication, and heavy-duty industries. The company holds trade shows in Las Vegas, Portland, West Springfield, Hannover, and Toronto.
Newman Tools, Inc., established in 1995 and based in Ottawa, Ontario, Canada, is a supplier of mini ratchet tools and welding inspection gauges. The company also supplies materials such as diameter tapes, dial indicators, valve wheel wrenches, and honing tools catering to machine shops, plant engineering, and maintenance places. The company has tools of different sizes and from different brands. The company has lubricants and sealants that are used in the nuclear industry.
Wixroyd Group Ltd, incorporated in 1951, is a supplier of design elements, machine accessories, camping & fixturing parts, and access components. The firm in Portfield Works, Chichester, supplies design elements such as sealing screws, ball lock pins, rod ends & joints, leveling feet, and load rings. The access components include cam latches, hinges & dampers, draw latches, masking inserts, and drawer slides. The work-holding equipment is self-aligning pads, lifting eye bolts, base plates, toggle clamps, and gauges. The Wixroyd Group comprises companies such as Automotion Components Ltd, Anti-VIbration COmponents Ltd, Coburg Components Ltd, and Nylon & Alloy Ltd.
Ranking as of August 2025
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Imao |
23.5%
|
| 2 | Rovi Products Inc. |
17.6%
|
| 3 | Wixroyd Group Ltd |
11.8%
|
| 4 | Newman Tools, Inc. |
11.8%
|
| 5 | Northwestern Tools |
11.8%
|
| 6 | Carr Lane Manufacturing |
11.8%
|
| 7 | Jergens, Inc. |
11.8%
|
Derivation Method
The ranking is calculated based on the click share within the id clamp page as of August 2025. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
5 | 71.4% |
|
Japan
|
1 | 14.3% |
|
United Kingdom
|
1 | 14.3% |
391 products found - Page 3
391 products - Page 3
NK Works Co., Ltd.
790+ people viewing
Last viewed: 23 hours ago
■Product overview INOFlex® is a flexible chuck suitable for almost all clamping tasks on modern machine tools. Regardless of workpiece geometry, wo...
6 models listed
NK Works Co., Ltd.
1570+ people viewing
Last viewed: 8 hours ago
■Product overview INOFlex® is a flexible chuck suitable for almost all clamping tasks on modern machine tools. Regardless of workpiece geometry, wo...
10 models listed
Nomura Manufacturing Co., Ltd.
180+ people viewing
By adopting the world's only cam lever system, the Nippon Steel Precision Hollow Power Chuck is lightweight and compact, and enables high-speed, hi...
Nomura Manufacturing Co., Ltd.
330+ people viewing
Last viewed: 19 hours ago
By adopting the world's only cam lever system, the Nippon Steel Precision Hollow Power Chuck is lightweight and compact, and enables high-speed, hi...
NK Works Co., Ltd.
1700+ people viewing
Last viewed: 9 hours ago
■Product overview INOFlex® is a flexible chuck suitable for almost all clamping tasks on modern machine tools. Regardless of workpiece geometry, wo...
9 models listed
NK Works Co., Ltd.
180+ people viewing
■Product overview Sunnen offers a wide range of honing tools and mandrels for almost any process and bore size. A mandrel is a tool used to hold th...
Nomura Manufacturing Co., Ltd.
200+ people viewing
Last viewed: 6 hours ago
By adopting the world's only cam lever system, the Nippon Steel Precision Hollow Power Chuck is lightweight and compact, and enables high-speed, hi...
Matsumoto Machine Industry Co., Ltd.
140+ people viewing
■Grasping technique In addition to three general-purpose power chucks, we offer chucks that can accommodate a variety of workpiece shapes and usage...
Nomura Manufacturing Co., Ltd.
190+ people viewing
Last viewed: 1 day ago
By adopting the world's only cam lever system, the Nippon Steel Precision Hollow Power Chuck is lightweight and compact, and enables high-speed, hi...
Nomura Manufacturing Co., Ltd.
220+ people viewing
By adopting the world's only cam lever system, the Nippon Steel Precision Hollow Power Chuck is lightweight and compact, and enables high-speed, hi...
Kyocera Corporation
330+ people viewing
Last viewed: 1 day ago
Tightly clamps the tip in two directions with one action. Flexible adjustment of coolant discharge direction. Coolant can be applied to the cutting...
5 models listed
NK Works Co., Ltd.
300+ people viewing
Last viewed: 12 hours ago
■Product overview ・Koning dorn designs according to customer specifications. ・Mechanical drive and manual drive are available. ・The clamp surfac...
Pal Co., Ltd.
210+ people viewing
Last viewed: 12 hours ago
Ideal for parts inspection, machining, and polishing. ■Features ・By tapping the end of the arbor with a wooden hammer, slide the arbor and expand...
TUNGALOY CORPORATION
220+ people viewing
■Ideal shape that maximizes chip evacuation while pursuing high rigidity through structural simulation ・Special alloy steel is used for the holder...
Pal Co., Ltd.
210+ people viewing
The precision fine-adjustment lathe chuck manufactured by Rehm, Germany, is used in various lathes, grinding machines, etc. as a necessity in preci...
Pal Co., Ltd.
220+ people viewing
Last viewed: 14 hours ago
■You can easily fine-tune the troublesome alignment. This is a lathe chuck that allows you to align the center of the grinder in microscopic units ...
Yamazaki Co., Ltd.
110+ people viewing
The color of the photo may differ from the actual product color. Product code: H00001LM0040002000 Number of packages: 1,000 pieces (number of sma...
Heinbuch Japan Co., Ltd.
200+ people viewing
■Advantages of introducing the Heinbuch system The Heinbuch system uses collet chucks and other clamping equipment in the Heinbuch system. A speci...
Heinbuch Japan Co., Ltd.
170+ people viewing
■Features Install the inner diameter mandrel adapter in just 1 minute Hydrolock + Mando inner diameter adapter ・Vibration damping effect by rubbe...
Heinbuch Japan Co., Ltd.
240+ people viewing
Overview ■Type ・T211 [Draw bolt type] / T212, T812 [Coupling type] ・T211, T212 [Retraction clamp] / T812 [Stationary clamp] ■Advantages compared...
Heinbuch Japan Co., Ltd.
180+ people viewing
■Summary Inner diameter mandrel for hobbing ■Features ・Design considering the interference area of the hob cutter ・Inner diameter and axial cl...
Heinbuch Japan Co., Ltd.
150+ people viewing
Overview ■Type ・ms dock: rotation speed 60rpm~7,000rpm ・HS dock: Rotation speed 60rpm or less, hydraulic cylinder ■Features ・Inner diameter man...
Heinbuch Japan Co., Ltd.
170+ people viewing
Overview ■Type Concentricity of standard specification is 0.01mm or less, concentricity of premium specification is 0.007mm or less ■Features ・He...
Kinokuniya Co., Ltd.
60+ people viewing
■Features This is a "chuck" manufactured by Kyushu Parts Processing Center.com. A feature of this product is that it is divided into three parts af...
