All Categories
History
This section provides an overview for board-to-wire connectors as well as their applications and principles. Also, please take a look at the list of 58 board-to-wire connector manufacturers and their company rankings. Here are the top-ranked board-to-wire connector companies as of December, 2024: 1.Acme Chip Technology Co., 2.Yamaichi Electronics Co., 3.Omnetics Connector Corporation.
Table of Contents
Categories Related to Board-To-Wire Connectors
A wire-to-board connector, also called a board-to-board connector, is a component used to electrically couple circuits on two printed circuit boards.
Board-to-wire connectors are mounted directly on both printed circuit boards to be connected and are bridged by cables with connectors attached to both ends.
For example, a male connector on the printed circuit board and a female connector on both ends of the cable are used to connect the two boards together, thereby directly connecting them electrically.
Wire-to-board connectors are available in various sizes of signal cables and connector pins, depending on the location of use and the required current capacity.
The requirements for wire-to-board connectors are how many signal cables can be accommodated in the connector and how well they can maintain a stable electrical and physical connection.
Wire-to-board connectors are almost certainly used in a variety of devices that use printed circuit boards, including most consumer and commercial equipment.
Without exception, these devices are becoming increasingly sophisticated and high-performance, and with this trend comes the need to reduce board space, and as a result, the need for all electrical components, including wire-to-board connectors, to be smaller, thinner, and lighter.
As mentioned above, the purpose of the wire-to-board connector is to electrically and directly connect two printed circuit boards.
Originally, this method was considered the most cost-effective and inexpensive, since a wire-to-board connector would not be necessary if all functions could be achieved on a single board.
However, in order to implement all required functions within the limited physical space of a device, it is practical to divide the board into multiple boards of appropriate sizes and insert them into the device to secure space inside the device.
In addition, there are significant advantages to be gained by dividing PCBs by function, which ultimately leads to cost reductions in the equipment.
By dividing a printed circuit board into multiple boards for each functional unit and combining these multiple boards, it is possible to simultaneously realize a wide variety of products with various functions. In this case, wire-to-board connectors that combine multiple boards are effective.
For example, suppose there are three boards to realize the necessary functions in designing a certain product: Board A for basic functions, Board B for additional functions, and Board C for additional functions.
By using only Board A, a product with the most basic functions can be realized, and by using Boards A+B, a product with added function B, A+C, and A+B+C, a product with added function B, and a product with added function B+C, respectively, can be realized.
In other words, four types of products can be realized by preparing boards with three functional units and combining them.
*Including some distributors, etc.
Sort by Features
Sort by Area
Cristek Interconnects, Inc., founded in 1985 with headquarters in the USA, is a manufacturer of a range of interconnect technologies and micro-components. The company's wide range of products includes microwave connectors, nanominiature connectors, microminiature connectors, microPCB connectors, and multi-pin cable assemblies. Cristek Interconnects’ products are found in aerospace vehicles, military vehicles, satellites, and spacecraft. The company was named subcontractor of the Year for Region IX by the US Small Business Administration in 2017 and is a preferred supplier to major military and aerospace contractors.
Adam Tech USA is an American manufacturer of electronic interconnects, cable assemblies, and custom components established in 1987 and headquartered in Union, New Jersey. The company produces electromechanical components including various switches, and custom components such as magnetic pogo pin cable assemblies and fiber optic adapters. It also offers standard as well as custom cable assemblies for unique client projects. The company operates internationally, with subsidiaries and branch offices in Germany, Taiwan, and Brazil.
Molex was founded in 1938 with the invention of Molex in 1938 and today is headquartered in Lisle, Illinois, and a subsidiary of Koch Industries. In the 1950s, the company invented the Molex connector which became the standard for power connections in personal computers for decades. Today the company is a manufacturer of electronic and fiber optic connectivity systems for customers in industries such as automotive, consumer electronics, healthcare, manufacturing, and telecom infrastructure. The company has several product categories including Connectors, Optical Solutions, Capillary Tubing & Micro Components, and Automation.
AirBorn, Inc. established in 1958 and based in Georgetown, TX, is a manufacturer and supplier of specialized connectors and electronic components. The company's product range includes cable assemblies, active optical cables, flex circuit assemblies, fuze assemblies, and active optical & fiber optics. These products are used in aerospace, energy, marine, medical, and space exploration sectors. It serves markets like commercial air, military & defense, medical, and space. The company provides services such as solution engineering, lab testing, PCB assembly, and chassis/box builds.
Cherng Weei Technology, founded in New Taipei City, Taiwan, 1994 is a manufacturer of cable assemblies and board connectors. The company's product portfolio includes coaxial cables, ribbon cables, twisted pair cables, multi-conductor cables, and fiber optic cables. Their products are used for connectivity for data, power, audio, video, and signal transmission. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building.
ATI-INTERCO, established in 1951 as ATI Electronique and based in Lisses, France, is a manufacturer of connectors. ATI-INTERCO's main products include connectors for printed circuits, modular miniature connectors, RF connectors, and filtered and shielded connectors. They also produce the connector accessories such as backshells, junction boxes, and cabling components. ATI-INTERCO's markets are civil entities, military, aerospace, defence, and communications. The company also provides customized design connectors according to client specifications and requirements for custom applications.
Yimtex is a certified ISO 9001 manufacturer of connectors and cable assemblies based in Taipei, Taiwan. Headquarters are located in the Guangdong Province, China. The company's products are used in electronics, computers, robotics, telecommunications, military, and industrial machineries. Clients can choose between OEM and ODM designs, which are manufactured in a 12,000 square-meter production facility with over 300 emaployees. Yimtex offers the following product lines: Puncture/Insulation Tester, Micro-Magnifying Glass, Salt Spray Tester, Cable/Harness Tester, Electrical Safety Compliance Analyzer.
Amphenol LTW, established in 1993 and headquartered in Taipei, Taiwan, is a manufacturer and supplier of interconnect solutions designed for harsh environments. Their product range includes waterproof connectors for marine and outdoor applications, high-temperature connectors suitable for automotive and industrial settings, vibration-resistant connectors for aerospace and defense applications, and EMI/RFI shielding connectors addressing electromagnetic and radio frequency interference concerns in medical and telecommunications sectors. Additionally, The company also offers cable assemblies to connect electronic devices.
CviLux, founded in 1990 with headquarters in Taiwan and manufacturing plants in China, is a manufacturer of connectors, FFC, and wire harnesses. The company's product line includes flat flexible FCC and LVDS cables, industrial wire harnesses and connectors, type C adapters, and fiber optical cable. CviLux's products are used in the industrial, medical, telecommunications, consumer products, and automotive markets. The company's products can be found in consumer vehicles, commercial vehicles, USB cables and connectors in mobile devices, and more. CviLux offers a complete turnkey solution, from product development to production.
Wieland, established in 1910 and based in Bamberg, Germany, is a manufacturer and supplier of electrical connection technology. Their product range includes pluggable connections for seamless plug-and-play electrical device connections, insulated connectors that provide electrical insulation in device connections, cable glands for safeguarding cables and ensuring a watertight seal, terminal blocks used for connecting electrical wires, and contact systems facilitating connections between electrical components. Wieland's products find applications in diverse industries, such as building construction, electrical engineering, and automation.
Tarng Yu Enterprise, a company founded in 1978, Taiwan, is a designer, manufacturer, and supplier of high-voltage power supplies. The company's product capability ranges from high-powered rack units to modules as small as one square inch. Their extensive range includes screws, nuts, bolts, washers, and other fastening components. These products and units are supplied to the NASA Space Program, the Department of Defense, and various industries such as automotive and electronics. The company also offers customer services such as prompt responses, technical support, and order processing to meet the client’s requirements.
Neltron Industrial Co. Ltd., founded in 1988 with headquarters in Taiwan, is a specialist manufacturer of electronic connectors and micro-components. The company's product line includes board-to-board connectors, wire-to-board connectors, PCB sockets, IDC edge connectors, and D-sub connectors. Neltron Industrial's products are used by OEM manufacturers in many industries, including the medical, telecommunications, consumer products, and automotive markets. The company’s products can be found in electronic devices, personal computing products, home appliances, and much more. Neltron Industrial Co. Ltd. also offers a complete customization service that includes product design, engineering, and production.
Harwin, established in 1952 and headquartered in Portsmouth, UK, is a manufacturer and supplier of industry-standard interconnect devices and PCB hardware. Their extensive product range includes connectors such as board-to-board, cable, and high-speed connectors for electronic device connections. They also offer PCB hardware like terminal blocks, sockets, and standoffs for mounting electronic components. Harwin provides EMC shielding products, including EMI gaskets, enclosures, and filters to safeguard devices from electromagnetic interference. Moreover, they offer backplane systems for connecting electronic devices in a backplane configuration, catering to telecommunications, industrial automation, and medical devices industries.
DDK Ltd., founded in 1963 and currently a subsidiary of Fujikura Ltd., is a Japanese manufacturer and supplier headquartered in Koto-ku, Tokyo, specializing in electronical connectors. The company’s product range includes automotive, board-to-board, circular and rectangular, coaxial, as well as flexible flat cable (FFC)/flexible printed circuit (FPC) connectors. These connectors are utilized across industries such as automotive, applied in automotive navigation systems, electronic toll collections, and vehicle audio devices; base stations of wireless computer networking; factory automation, applied in control equipment, industrial robots, servomotors, and welding machines; and information technology, applied in digital cameras and video cameras, mobile devices, and measuring instruments.
ES&S Solutions GmbH was established in 1990 in Viersen-Mackenstein, Germany and is a manufacturer of electronics components. The company's products include adapters, PCB, flex jumpers, cables and wires, which are used in electronics and electrical applications. It has some accreditations, including RoHS, ISO 9001:2015, Reach and UL. In case of any fault, the company has a return structure where customers fill out a Return Material Authorisation (RMA) form on the website. Also, it provides a contact person for clients to give them advice on technical matters.
LSTC, Dongguan LSTC Electronic Co. Ltd., established in 2010 and headquartered in Dongguan, Guangdong, China, is a manufacturer and supplier of connector cables. Its product line includes wire-to-board connectors, automotive connectors, IDC connectors, and power connectors. The company also provides advanced automated production and testing equipment, such as a horizontal injection molding machine, SODICK mold development, high-speed dual-axis punch, Fischer film thickness tester, and a high-precision image size measuring instrument. The company holds several certifications, including ISO 14001:2015 and IATF 16949:2016 for quality management, a UL product certificate, and multiple proprietary patents.
HIROSE ELECTRIC CO., LTD. (HRS) is a Japanese manufacturer specializing in electronic and electrical connectors. Founded in Tokyo in 1937, the company now has eight factories located in Japan, China, Korea, Malaysia, and Indonesia, with several sales and service locations throughout the US, Europe, and Singapore. The company carries a selection of over 50,000 products, including fiber optic connectors, sealed connectors, and card edge connectors. HRS also offers advanced engineering services to cater to specific customer demands, and after-sales support to clients in the consumer electronics, automotive, and telecommunications industries.
JST Group, founded in 1957, is an international manufacturing company specializing in the development of all types of systems for connecting electric power and electronic devices. It obtained ISO9002 approval in 1993, and it has gone on to open offices and affiliated companies in Europe, America and other parts of Asia. JST uses modern advances like ultraprecision technology, gold plating processes, CNC copy grinder, to ensure quality and improved performance of every appliance it manufactures. JST products can be used in televisions, laptops, trains, medical equipments and even kitchen appliances.
Japan Aviation Electronics Industry, Ltd, commonly known as JAE, was established in 1953 and headquartered in Tokyo, Japan. The company is a designer and manufacturer of connectors, user interface solutions, and electronics for the aerospace, agriculture, semiconductor, and camera stabilization sectors. THe company’s product segments include IO connectors, board to board connects, cable to cable connectors, and more. The company’s motion sensing and control segment includes accelerometers, inertial measurement units, and directional modules.
J.S.T. (U.K.) LTD. is a electrical and electronic connectors manufacturer founded in 1982 in Suffolk, United Kingdom. The company displays a wide range of products, such as PCB, I/O, Wire to Wire and Factory Automation connectors. It also produces Crimp, DIN, Tape-on and Solderless terminals. In addition, it offers services like Product and Tooling Technical Support, Design and Development, and Laboratory and Testing. It works under the IATF16949 Quality Management Systems and is certified for ISO 14001, ISO 9001, and ISO 16949.
Japan Automatic Machine Co. (JAM) primarily serves the automotive industry and related industries. JAM provides development, manufacturing and sales of automatic wire processing machines, terminals, connectors, electronic components, precision vices, precision presses, precision tools and instruments, progressive die and injection mold tooling, and other related products. JAM is headquartered in Japan and has offices globally.
Greenconn TECHNOLOGY (Ganzhou) LTD. is a Taiwanese manufacturer of connectors for various electronic applications that was established in 1998 before expanding its operations and relocating its headquarters to Jiangxi, China, in 2004. The company’s product lineup includes specialized connectors for common consumer electronics products including smartphones, PC motherboards, and power supplies. It also offers connectors and cables for medical equipment or devices, along with custom manufacturing services for unique projects. The company chiefly serves clients in the consumer electronics, industrial automation, and home appliance markets.
Dawning Precision Co., Ltd. was established in 2006 and is a manufacturer of electronic switches and connectors located in New Taipei City, Taiwan. Products offered include tact switches, slide switches, detector switches, push switches, and phone jacks, which are essential components in electronic devices and systems, providing efficient connectivity and control. Their products are used in IoT applications such as cloud devices, smart homes, automotive, white goods, and healthcare products. The company is compliant with ISO 9001 and ISO 14001 certification standards.
Samtec was established in 1976 and is headquartered in New Albany, Indiana, USA as a manufacturer of electronic interconnect solutions. They offer an extensive portfolio of products, including board-to-board connectors, IC sockets, cable assemblies, and optical systems. Alongside their product offerings, Samtec provides comprehensive design and engineering support, as well as custom solutions tailored to specific customer needs. Their products find applications in high-speed data transmission, embedded computing,, and advanced electronic systems across various sectors.
Omnetics Connector Corporation is a manufacturer of micro- and nano-miniature interconnectivity products established in 1984 and based in Minneapolis, Minnesota, USA. The company offers micro connectors for small pitch applications such as in the military or aerospace applications, and nano connectors for high-durability or space-constrained applications. It also offers custom design and engineering services for unique projects. The company’s products are QPL-approved to MIL-DTL-32139 as well as MIL-DTL-83513 standards, and are mainly used in the aerospace and defense sectors.
Acme Chip Technology Co. Ltd., founded in 2008 and based in Shenzhen, China, is a distributor of electronic components that is ISO 9001 certified. Its products include sensors, power supplies, and optical inspection equipment sourced from several manufacturers, including Advanced Linear Devices Inc., Central Semiconductor Corp., and Fluke. The company also offers a large stock of electronic components, including obsolete components and old code chips that are always available for immediate shipment.
Anderson Power was established in 1877 and is based in Sycamore, Illinois as manufacturer and supplier of power interconnect solutions. Their product portfolio includes power connectors, battery connectors, modular connectors, and cable assemblies, among others. The power connectors and accessories offered by the company are crucial components in electrical systems, enabling secure and efficient power transmission. The products are used in Data Centers as connector solutions for Busways, Uninterruptible Power Supplies, Power Distribution Units, and Power Supply Units. They are utilized in high-capacity HVAC systems to autonomous robotics charging and also outdoor high-current applications.
AUK Contractors Co., Ltd., established in 1983 and headquartered in New Taipei City, Taiwan, is a manufacturer of connectors, cable assemblies, and precision metal stamping products. Their wide range of connectors includes board-to-board connectors, cable connectors, and terminal blocks, serving applications in telecommunications, industrial automation, and medical devices to ensure smooth data and power transmission. The company adheres to ISO 14001 environmental management standards, IATF 16949, and ISO 9001 for quality management.
TE Connectivity Ltd., started in 2007 and headquartered in Schaffhausen, Switzerland, is a designer and manufacturer of sensor and connectivity solutions for harsh conditions. It operates three primary segments, namely transport, industrial, and communication solutions, and its product portfolio includes automotive connectors, fiber optic connectors, analog power meters, RTD sensors, and circuit breakers. It serves customers in approximately 140 countries and several industries, including aerospace, automotive, rail, IoT connectivity, and E-mobility. The company manufactures 192 billion products annually and has invested over 610 million USD in research development and engineering.
SMK Corporation, with its roots dating back to 1925 in Tokyo, Japan, has established itself as a manufacturer specializing in connectors, remote control systems, and electronic components. It boasts a diverse product portfolio that includes connectors, plugs, switches, remote control units, and touch panels. These quality components play pivotal roles in an array of applications and an assortment of industries, ranging from home electronics for the operation of devices like air conditioners, to the automotive sector in the rear-view mirrors. Furthermore, its solutions extend to the realm of mobile devices, wearable technology, such as smart glasses, and healthcare equipment.
ShenZhen Antenk Electronics Co., Ltd. is a manufacturer and supplier of connectors and cable assemblies that was established in 2007 and is headquartered in Shenzhen, Guangdong, China. The company produces a wide range of connectors, including board-to-board connectors, wire-to-board connectors, and cable assemblies. Its products, such as USB connectors, HDMI connectors, SATA connectors, FPC/FFC cable connectors and RJ45 connectors, are used by a number of industries, as diverse as electronics, telecommunications, and automotive industries. The company also provides a range of services, including custom design, manufacturing, and testing.
Nextronics Engineering Corp., established in 1987, is a manufacturer and supplier headquartered in New Taipei City, Taiwan, specializing in interconnection solutions for artificial intelligence, automation, and robotic applications. The company offers connectors of various types and forms, along with press-fit machines and tooling. It also develops thermal and cooling solutions, as well as heat dissipation capabilities and thermal analysis tools. As a member of the Peripheral Component Interconnect Industrial Computer Manufacturers Group (PICMG), the company offers embedded system components and its patented enclosures which adhere to PICMG standards. These products find applications in medical, aerospace, transportation, industry, and communication (MATIC) fields.
GTK UK LTD, formed in 1990 and based in Basingstoke, United Kingdom, is a manufacturer and supplier of a broad selection of electronics solutions. The company specializes in manufacturing over-molded cable assemblies, waterproof cable assemblies, board-to-board connectors, and color displays. It is also specializes in producing cord sets, I/O connectors, defense, aerospace cable assemblies, and mono displays. The company's overmolded cable assemblies protect against shock and vibration, abrasion and corrosion, extreme temperatures, pull forces, and aging.
Shenzhen Hungarian Connector Co., Ltd, established in 2000 and based in Shenzhen, Guangdong, China, is an ISO TUV-certified manufacturer and supplier of connectors. The company's product range includes wire-to-wire/board connectors, insulated faston terminal, rast IDC connectors, IDC connector series, and downlight connectors. These products are used in applications such as LCD displays, household appliances, power supply electronic control, and treadmills. The company serves industries including communications, automobiles, power electronics, and lighting. The company offers services such as connector and wiring harness matching production, and planned expansion into automotive connector manufacturing.
EDAC, Inc., established in 1966 and headquartered in Markham, Ontario, Canada, is a manufacturer and distributor of connectors for Card Edge and Rack & Panel applications. Their diverse product range includes machined D-Sub connectors, power combo D-Sub connectors, USB connectors, HDMI connectors, and more, catering to industries such as aerospace, defense, industrial, medical, and transportation. EDAC adheres to various multi-regulatory compliance requirements, including RoHS, UL, ISO, REACH, Conflict Materials, California Prop 65, and ITAR (International Traffic in Arms Regulations).
Phoenix Contact is headquartered in Blomberg, Germany, originally founded in 1923. Phoenix Contact’s Israeli subsidiary was founded in 2006 and located in Quadima Tzoran. Phoenix Contact provides tools and components for e-mobility, power, infrastructure, process industry, production manufacturing, system manufacturing, and others. Phoenix Contact’s product lines include automate including cloud computing, connect including PCB terminal blocks, “mark, assemble, and install” including hand tools, “supply, charge, and protect” including power distributors, and “switch, measure, and monitor” including relays and optocouplers.
Amphenol Corporation is a designer and manufacturer of electrical products founded in 1932 and headquartered in Wallingford, Connecticut, USA. The company produces specialized cable assemblies, power distribution equipment, and communication products. These include antenna technology for wireless communication, raw cables for box assemblies, and interconnectivity products such as over-molded connectors or printed circuit boards (PCBs). Amphenol is ISO 9001, ISO 14001, and AS 9100-certified. It primarily serves clients in the defense, information technology, and commercial aerospace sectors.
Taiwan King Pin Terminal Co., Ltd., headquartered in New Taipei City, Taiwan, is a manufacturer and distributor of electronic and computer connectors. Its product range includes connectors for wire-to-board, wire-to-wire, board-to-board, power supply, and LED applications, serving various industries like consumer electronics, IT peripherals, telecommunications, automotive, and digital products. The company holds ISO-9001 and IATF16949 certifications for quality management systems and holds product recognitions such as UL, SCA, TUV, and invention patents.
ERNI Group of Companies was founded by Ernst R. Erni in 1947. The company is headquartered in Adelberg, Germany, and specializes in the field of connectors, cable housings, cable assemblies, and components. Their targeted markets are aerospace, automobiles, communication, instrumentation, military, and other related industries. ERNI has joined hands with TE Connectivity to serve clients even better. The production house and subsidiaries offices of ERNI Group of Companies are located in Asia, America, and Europe.
Linde PLC, established in 1879 and headquartered in Woking, England, is a global service provider of industrial gases and engineering. The company's industrial gases find applications in critical areas such as hydrogen production, medical oxygen, electronics manufacturing as well as in carbon capture systems for energy transitions. It also offers state-of-the-art gas processing solutions to support customer expansion accross the globe while promoting education, diversity, sustainability, and health on a global scale through its engineering technologies.
OMRON Corporation is a Kyoto based electrical equipment manufacturing company founded by Kazuma Tateisi in 1933. OMRON’s product portfolio includes medical equipment like nebulizers and digital thermometers, automated teller machines for the finance industry to AC, DC and custom control systems for the oil and gas industries. The company has over 30,000 employees and offers its products and services in 120 countries. It primarily serves the healthcare, energy, casino, and automated test equipment industries.
Shenzhen Shengyu Electronics Technology Ltd., founded in 2008 and headquartered in Shenzhen, China, is an electric component distributor that is ISO 9001 certified. The company stocks several components, including switches, capacitors, and resistors, which it sources from multiple manufacturers like Seiko Instruments, Inc., Renesas Electronics America, and Nuvoton Technology Corporation America. Depending on the size and configuration of the customer’s components, the company provides a full range of packaging services. It accepts single or multiple-part quotations, and its website allows customers to search hundreds of products ranging from ICs to computer accessories.
Dongguan Lianda Precision Products Co. Ltd., established in 2002 and headquartered in Guangdong, China, is an electronic connector designer, manufacturer, and supplier. The company's products include board-to-board connectors, wire-to-board connectors, and various I/O connectors like pin headers, female headers, and USB connectors. It also supplies IC sockets, mini jumpers, and DC jacks. These products are used in the manufacture of electronic devices, home appliances, and telecommunications equipment. The company serves wholesale buyers and also offers full OEM and ODM services.
CHIEN SHERN ENTERPRISE CO., LTD, founded in Taiwan in 1987, is a supplier of connectors. The company's product portfolio includes Wire to Board, Wire to Wire, Housing, Wafer, Terminal, FFC/FPC, Water Proof connector, and cable assembly. It serves industries such as Electronics and Technology, Medical Devices and Healthcare, Energy and Renewable Energy, Manufacturing and Industrial, and Research and Development. It also offers services including connector Assembly and Customization, Technical Support and Consultation, Rapid Prototyping, and Custom Labeling and Packaging.
CODICO, or Component Design-In Company, is a distributor of high-grade active and passive electronic components and connection technology products. Operating as an independent, private company headquartered in Perchtoldsdorf, Austria, it also maintains product competency centers in Munich, Treviso, and Stockholm, for its design-in services. Its services encompass cross-competency project management, consultation, and extended support. The company ensures timely deliveries and monitors pricing while providing technical support throughout the development of high-caliber electronic components. Customizable logistics solutions and collaboration with suppliers are also offered by the company to provide insights into technology trends and product roadmaps.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Acme Chip Technology Co. |
8.0%
|
| 2 | Yamaichi Electronics Co. |
8.0%
|
| 3 | Omnetics Connector Corporation |
4.0%
|
| 4 | Dongguan Lianda Precision Products Co. Ltd |
4.0%
|
| 5 | Sunny Young Enterprise Co., Ltd. |
4.0%
|
| 6 | Shenzhen Hungarian Connector Co., Ltd. |
4.0%
|
| 7 | Dongguan JVT Connectors Co., Ltd |
4.0%
|
| 8 | Zhejiang Lianhe Electronics Co., Ltd. |
4.0%
|
| 9 | ES&S Solutions GmbH |
4.0%
|
| 10 | Shenzhen Atom Technology Co., Ltd |
4.0%
|
Derivation Method
The ranking is calculated based on the click share within the board-to-wire connector page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
China
|
11 | 25.0% |
|
Taiwan
|
10 | 22.7% |
|
Germany
|
6 | 13.6% |
|
Japan
|
6 | 13.6% |
|
United States of America
|
5 | 11.4% |
|
United Kingdom
|
3 | 6.8% |
|
France
|
1 | 2.3% |
|
Canada
|
1 | 2.3% |
|
Ireland
|
1 | 2.3% |
274 products found
274 products
Nippon Tanshi Co., Ltd.
70+ people viewing
Last viewed: 8 minutes ago
■Features ・Compliant with RoHS and ELV directives ・Embossed taping specifications ・Low profile and low mating force connector with outer lock st...
Nippon Tanshi Co., Ltd.
50+ people viewing
■Features ・Compliant with RoHS and ELV directives ・Embossed taping specifications ・Supports function to prevent incorrect mating due to differen...
Nippon Tanshi Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
■Features ・Compliant with RoHS and ELV directives ・Supports function to prevent incorrect mating due to different color products ・Potting-compat...
Greenconn TECHNOLOGY (Ganzhou) LTD.
240+ people viewing
Last viewed: 46 seconds ago
*Other product numbers are available.
10 models listed
Nippon Tanshi Co., Ltd.
60+ people viewing
Last viewed: 5 hours ago
■Features ・Compliant with RoHS and ELV directives ・Low mating force and good click feeling prevent half-mating and improve workability ・Low prof...
Nippon Tanshi Co., Ltd.
60+ people viewing
Last viewed: 12 hours ago
■Features ・Compliant with RoHS and ELV directives ・Low profile and low mating force connector ・A wide variety of colors
Nippon Tanshi Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
■Features ・Compliant with RoHS and ELV directives ・Embossed taping specifications ・Supports function to prevent incorrect mating due to differen...
Nippon Tanshi Co., Ltd.
40+ people viewing
Last viewed: 15 hours ago
■Features ・Compliant with RoHS and ELV directives ・Embossed taping specifications ・Supports function to prevent incorrect mating due to differen...
Takitech Co., Ltd.
120+ people viewing
Last viewed: 4 hours ago
Very Fast Response
■Summary Compact design with 1.0mm pitch double row type and board mounting height of 5.5mm (side). A compact connector that fully meets the demand...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 14 hours ago
Standard Response
4.0 Company Review
■Small multi-pole lever airbag connector ・Developed a compact multi-pole lever with 100 pins (signal) for use in in-vehicle airbags. - Compatible ...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 8 hours ago
Standard Response
4.0 Company Review
■Features ・Supports high-density mounting ・The board side receptacle is a low profile SMT type with a mounting height of 1.5 mm (board drop type,...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 2 hours ago
Standard Response
4.0 Company Review
■Automotive HDMI connector In recent years, an increasing number of users are connecting digital mobile terminals and entertainment devices in thei...
Takitech Co., Ltd.
190+ people viewing
Last viewed: 5 hours ago
Very Fast Response
■Summary Adopted the first crimping method with the smallest pitch of 1.0mm for board-to-wire. The housing lance method provides high workability, ...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 21 hours ago
Standard Response
4.0 Company Review
■USB Type-C Connector (Receptacle) The DX07 series is a connector that complies with the USB standard "USB Type-C®". As a standard interface connec...
Japan Aviation Electronics Industry, Limited
30+ people viewing
Last viewed: 11 hours ago
Standard Response
4.0 Company Review
■Board-to-cable connector compatible with high-speed differential transmission We have developed an additional product for the FI-X30 core crimp pl...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■USB Type-C Connector (Plug) The DX07 series is a connector that complies with the USB standard "USB Type-C®". It is expected to be used in a wide ...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 6 hours ago
Standard Response
4.0 Company Review
■Board-to-cable connector compatible with high-speed differential transmission As a licensed product of CABLINE®-VS manufactured by Daiichi Seiko C...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■Differential transmission connector for automotive cameras We have developed the MX55J series, a transmission and waterproof connector for connect...
Greenconn TECHNOLOGY (Ganzhou) LTD.
70+ people viewing
Last viewed: 2 hours ago
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 9 hours ago
Standard Response
4.0 Company Review
■USB Type-C Connector (Cable Harness) The DX07 series is a connector and harness that complies with the USB standard "USB Type-C®", and is widely u...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 15 hours ago
Standard Response
4.0 Company Review
■Features ・For board-to-cable/cable-to-cable (relay) connections ・Small connector ・Contact tab size 025, contact pitch 2.5mm ・Secure fitting wi...
Japan Aviation Electronics Industry, Limited
10+ people viewing
Last viewed: 17 hours ago
Standard Response
4.0 Company Review
■Small coaxial connector for car antenna (75Ω) / for digital radio (50Ω) With the increasing number of in-vehicle information devices such as navig...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 11 hours ago
Standard Response
4.0 Company Review
■In-vehicle USB3.0/in-vehicle high-speed transmission connector In recent years, with the spread of USB3.0 compatible products in the consumer mark...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■Insulator-less single wire cable push type connector ES10 series This is an insulator-less, compact, low-profile, single-wire cable push-in type c...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■Squib connector for automotive airbags In recent years, in order to further improve the safety performance of automobiles, it has become increasin...
Japan Aviation Electronics Industry, Limited
10+ people viewing
Last viewed: 10 hours ago
Standard Response
4.0 Company Review
■Single-wire cable plug-in type connector for LED lighting equipment (cULus certified product) A small, low-profile, single-wire cable plug-in type...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 10 minutes ago
Standard Response
4.0 Company Review
■Short terminalless type squib connector for automotive airbags Following the AK2 type (MX72A/B), we have developed a short terminalless type (MX72...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 20 hours ago
Standard Response
4.0 Company Review
■In-vehicle USB3.2 compatible There is a growing need for video signal transmission between ECUs and displays, as well as communication with in-veh...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■Board-to-cable type connector for LED lighting power supply (cULus certified product) A board-to-cable type (2-core) connector ideal for LED light...
Japan Aviation Electronics Industry, Limited
20+ people viewing
Last viewed: 1 day ago
Standard Response
4.0 Company Review
■2.0mm pitch 2-row type crimp type ・There are two types of pin headers for board mounting: straight through hole and right angle through hole type...
