26 Moisture Sensor Manufacturers in 2023
This section provides an overview for moisture sensors as well as their applications and principles. Also, please take a look at the list of 26 moisture sensor manufacturers and their company rankings.
Table of Contents
What Is a Moisture Sensor?
Moisture sensors are used in a wide range of fields to measure the moisture content in wood, coal, food, and fiber. Moisture sensors use a variety of measurement methods, including capacitance, electrical resistance, microwave, near-infrared, and neutron. Electricity, neutrons, and near-infrared rays are applied to the object to be measured, and the moisture sensor detects and determines the amount of moisture. Depending on the method, there are two types: those that directly contact the sample for measurement and those that allow non-contact measurement.
Uses of Moisture Sensors
As mentioned above, moisture sensors are used to measure the moisture content of various objects. They are used by manufacturers and factories of wood, paper, coal, food, textiles, etc. It is often used to check the quality of products before they are shipped. It is also sometimes used by cosmetics manufacturers to measure the moisture content of skin. Moisture sensors can measure the moisture content of various substances, but it is necessary to select the right sensor and model for the intended use and object.
Principle of Moisture Sensors
Measurement methods include the following:
- Electric Capacity Type
Electricity (alternating current) is applied to the measurement object, and the capacitance (change in electrical capacitance) is converted into the amount of moisture. The advantages of this method are that it can be easily miniaturized and does not damage the object to be measured. However, since it is affected by thickness and density, it is necessary to measure under the same conditions. - Electric Resistance Type
Electricity is applied to the object to be measured, and the resistance value is converted into the amount of moisture. Since it is not easily affected by the density of the object to be measured, it is suitable for measuring objects whose densities easily change, but its disadvantage is that it requires a needle to be inserted, which can damage the object. - Microwave Type
The moisture content is measured from the attenuation of microwaves when they are passed through the object to be measured. It can quickly measure the moisture contained inside the object, but requires the installation of a large device. - Near-Infrared Type
Light called near-infrared is shone on the object to be measured. Since moisture absorbs near-infrared light well, the greater the moisture content, the less light is reflected. Using this principle, the amount of moisture is determined from the reflectance of the irradiated near-infrared light. The advantage of this method is that it is easy to install and does not damage the object to be measured. Its disadvantages are that only a small portion of the surface can be measured, and it is affected by the color of the object being measured. - Neutron Method
The amount of fast neutrons converted to thermal neutrons is proportional to the amount of hydrogen. Fast neutrons are applied to the object to measure the amount of thermal neutrons, and the amount of moisture is calculated from the amount of hydrogen. Moisture contained inside can also be measured. On the other hand, it is important to note that the equipment has a short life span and is fragile. Also, since it handles radiation, it requires specialized training.
List of 26 Moisture Sensor Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- India
- Japan
- Netherlands
- United Kingdom
-
-
-
-
-
-
-
-
-
-
-
-
-
Win Source Electronic Technology Ltd.
Moisture Sensors
Company Overview
WIN SOURCE is a customer-focused online store serving a wide variety of markets industries ranging from consumer to automotive to medical, industrial, and aerospace. WS specializes on size and speed, offering a catalog of over 1 million SKUS that can be shipped within 24 hours around the world. Offerings include an extensive array of semiconductor components, audio products, cable assemblies, racks, and battery products. WIN SOURCE is AS9120B, ISO9001, ISO14001, and ISO45001 certified and is a member of the anti-counterfeiting organization, ERAI.
-
-
-
-
-
Jamieson Equipment Co., Inc.
Moisture Sensors
Company Overview
Jamieson Equipment Company (JEC) was founded in 1982 and located in the state of Georgia. JEC serves infrastructure-related industries including pavement with concrete, aggregate, and asphalt, chemicals, sewage and waste management, and agriculture and food. JEC sells, installs, retrofits, repairs, and offers training and troubleshooting for a range of components and tools from simple fittings to motion sensors to electronics to valves to actuators, cranes, mixers, silos, hoppers, and plants.
-
-
-
-
-
-
-
-
-
-
-
-
-
Hybrid Electronics
Moisture Sensors
Company Overview
Hybrid Electronics is a global distribution specialist of electronic components, with access to over 50 million unique components. Among the markets HE serves are the aerospace, automotive, communications, defense, industrial, medical, national security, and test & measurement industries. In addition to components, HE also provides quality and compliance testing, counterfeit detection, upscreening, and other forms of quality control. Examples of component subtypes that HE offers include ICs, batteries, capacitors, semiconductor products, sensors, circuit protection, interconnectors, filters, optoelectronics, relays, switches, power supplies, and cables and cable assemblies.
-
-
-
-
-
-
-
-
-
Balluff
Moisture Sensors
Company Overview
Balluff was founded in 1921 and is headquartered in Neuhausen, near Stuttgart, Germany. Balluff is a manufacturer of sensor and automation solutions for customers globally. Balluff serves many industries including life sciences, semiconductors, metalworking, fluid power, and mobile equipment. Balluff’s product line consists of sensors and connectivity components, accessories, complete systems, and software. Balluff offers services to assist customers across the range of finding solutions, deploying solutions, training, as well as support.
-
-
-
-
-
PCE Instruments
Moisture Sensors
-
-
-
-
-
ifm efector, inc.
Moisture Sensors
Company Overview
ifm efector (ifm) is a subsidiary of ifm electronic, founded in Germany in 1969. ifm has developed, manufactured and marketed sensors and controls technology to industries that include assembly and robotics, automotive, material handling, metal forming, mobile equipment, plastics, and food and beverage. Ifm produces sensors, condition monitoring equipment, image processing, safety technology, industrial communication, IO-link, systems for mobile machines, displays, software, connection technology, voltage supplies, as well as other accessories.
-
-
-
-
-
Mod-Tronic Instruments Limited
Moisture Sensors
Company Overview
MOD-TRONIC Instruments Limited was established in 1972 in Brampton, Ontario, Canada. MTis a distributor of industrial sensors, transducers, heaters, controls, and instrumentation, primarily made in the USA as well as Japan, Switzerland, and Germany. MT’s customers are primarily in the aerospace, building automation, manufacturing, medical, military, oil and gas, and water treatment industries but also serves individuals. MT offers an above industry standard 5-year warranty and technical support on every product sold.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CMS Industrial Technologies, LLC
Moisture Sensors
-
-
Moisture Sensor Manufacturer Ranking
*Including some distributors, etc.Ranking as of March 2023 in United States of America
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Murata Manufacturing Co., Ltd. | 100% |
Ranking as of March 2023 Globally
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Murata Manufacturing Co., Ltd. | 100% |
Derivation Method
The ranking is calculated based on the click share within the moisture sensor page as of March 2023. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Murata Manufacturing Co., Ltd.: 77,581
- Balluff: 3,600
Newly Established Company
- Yunnong: 2012 (11 years ago)
- PCE Instruments: 1999 (24 years ago)
- SIVARA SYSTEMS AND SOLUTIONS: 1998 (25 years ago)
Company with a History
- Balluff: 1921 (102 years ago)
- Murata Manufacturing Co., Ltd.: 1944 (79 years ago)
- SIVARA SYSTEMS AND SOLUTIONS: 1998 (25 years ago)
Related Products
Search from All Categories
This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.