79 Plastic Valve Manufacturers in 2024
This section provides an overview for plastic valves as well as their applications and principles. Also, please take a look at the list of 79 plastic valve manufacturers and their company rankings. Here are the top-ranked plastic valve companies as of November, 2024: 1.Plast-O-Matic Valves, Inc., 2.ITT Engineered Valves, 3.Valtorc International.
Table of Contents
What Is a Plastic Valve?
A plastic valve is a type of valve made from plastic materials, such as PVC or PTFE.
While some valves made of stainless steel or cast iron may incorporate plastic components, plastic valves are entirely constructed from plastic materials.
Plastic valves are typically employed in corrosive environments where plastic is the only suitable material or in situations where metal valves are not feasible.
However, due to their resin-based construction, plastic valves have lower absolute strength compared to metal valves. Additionally, extended exposure to sunlight may result in deterioration and a loss of strength.
Uses of Plastic Valves
Plastic valves are frequently used in corrosive chemical pipelines, capitalizing on their resistance to chemical degradation. They excel in handling highly concentrated hydrochloric acid, such as 35% hydrochloric acid, and are commonly chosen when strength is not a concern.
For applications involving sulfuric acid, high concentrations may require steel galvanized pipes (SGP), but for hydrochloric acid, resin-based valves become the primary choice.
Plastic valves are also preferred when dealing with corrosive fluids in situations where various liquids are mixed. Valves made from low-elution resin can even be used in pure water pipelines without issues.
Principle of Plastic Valves
Plastic valves are primarily constructed from materials such as PVC or PTFE, imparting them with high corrosion resistance.
One significant advantage of plastic valves, in addition to their corrosion resistance, is their lightweight nature, exerting minimal stress on the piping system.
Valves made from stainless steel with PFA coating or rubber lining can be heavy and labor-intensive to install. If the coating or lining becomes damaged, it can lead to rapid corrosion in those areas.
Plastic valves, on the other hand, are lightweight and inherently corrosion-resistant, offering a significant advantage in this regard.
However, due to the characteristics of plastic materials, they may degrade when exposed to ultraviolet light. Similar to how plastics outdoors often turn white over time, PVC can gradually deteriorate and lose strength. Consequently, when PVC is used outdoors, periodic replacement may be necessary.
Additionally, being plastic, their impact resistance is lower. Therefore, careful consideration is required when using PVC in pipelines susceptible to water hammer, and adequate piping support must be ensured.
List of 79 Plastic Valve Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- Canada
- China
- France
- Germany
- Japan
- Republic of Korea
- Spain
- United Kingdom
-
-
-
ITT Engineered Valves
Plastic Lined Trunnion Ball Valve
Manufacturer Overview
ITT Engineered Valves is a manufacturer specializing in advanced valve solutions, based in the United States. With a foundation dating back to 1982, the company has firmly established its industry name. Serving diverse sectors including Oil and Gas, Chemical, Power Generation, Water Treatment, and Aerospace. The company offers a comprehensive product range. This includes Ball Valves, Butterfly Valves, Diaphragm Valves, Check Valves, and Control Valves, amongs other control instruments and accesories. These precision-engineered solutions provide components that facilitate fluid control and management across various critical industries.
-
-
-
-
-
Hog Slat
PLASTIC DRAIN SPIGOT VALVE
Manufacturer Overview
Hog Slat, Inc. is an American manufacturer of livestock equipment with secondary operations as a farm construction contractor that was established in 1969 in Newton Grove, North Carolina. The company produces various livestock solutions for swine and poultry, including feeders, crates, stalls, coops, and netting. They also offer custom design, engineering, and turnkey delivery services for in-state clients with demanding project timelines. Hog Slat primarily operates in North and South America, with more than 90 retail locations nationwide and regional offices in Iowa and Oklahoma.
-
-
-
-
-
Leader
Plastic Valves
Manufacturer Overview
Leader, established in 1888 and based in New York, United States, is a manufacturer of evaporators. The company also sells other products such as tapping bits, tubing systems, tubing tools, evaporators, and testing equipment and supplies them to different industries. At the start, the company started to manufacture evaporators made of tin plates, and sugaring-off pans made of iron and galvanized iron. The company later has added sugarcane equipment into the portfolio of its products.
-
-
-
-
-
R/C Machining Company
Plastic Valves
Manufacturer Overview
Machined Ceramics, Inc., established in R/C Machining Company, established in Glenwood, MN is a manufacturer of screw machining and CNC turning and milling. The company's product portfolio includes multi-spindle automatic screw machines, NC machining for parts requiring closer tolerances or complex machining and secondary operations, including threading, knurling, deburring, and finishing. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and Aerospace. The company also offers customer services that include support, custom research projects and customized services.
-
-
-
-
-
NIBCO INC.
Plastic Valves
Manufacturer Overview
NIBCO INC. was founded in 1904 in Elkhart, Indiana. NIBCO is a worldwide manufacturer of flow control system solutions for residential, industrial, marine, and irrigation markets. NIBCO is ISO 9001:2015 certified. NIBCO products segments include system management including air separators and isolation strainers, fittings including metal and plastic fittings, tools, pipes, & accessories, and valves which includes among others, press tools, push tools, ball valves, boiler drains, butterfly valves, check valves, and gate valves.
-
-
-
-
-
Badger Meter, Inc.
Plastic Valves
Manufacturer Overview
Badger Meter, Inc. was founded in 1905 and based in Milwaukee, Wisconsin. Badger Meter is a manufacturer and marketer of flow measurement, quality, control, and communication solutions in the United States and globally. Badger Meter serves several industries including water treatment, water distribution, aviation, concrete production. Badger Meter offers utility water solutions and commercial & industrial solutions product segments. Together they include products such as meters, software, diagnostics, and quality monitoring.
-
-
-
-
-
Micromold Products, Inc.
Plastic Valves
Manufacturer Overview
Micromold Products was established in 1954 and headquartered in Yonkers, New York. The company is a manufacturer of a broad line of corrosion-resistant plastic products, specifically Kynar, polypropylene, nylon, and Kel-F, for process industries. The company has developed proprietary manufacturing processes for PTFE and PFA machined parts and weldments. The company’s product line includes a complete line of dip pipes, sparges, valves, strainers, and piping systems. The company makes a full line of CNC machined parts for process industry OEMs including PTFE, PEEK, and UHMW polyethylene ball and butterfly valve seats, pump seals, and instrumentation components.
-
-
-
-
-
Valtorc International
Plastic Valves
Manufacturer Overview
Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.
-
-
-
-
-
American Manufacturing Co., Inc.
Plastic Valves
Manufacturer Overview
American Manufacturing Company, Inc. manufactures the controls and onsite wastewater and water system products in Elkwood, Virginia, United States since 1984. The company manufactures specialty panels as well as standard controls for water and wastewater systems which include potable water systems, drip dispersal systems, level alarms, and devices for remote operations and monitoring. There are also PERC-RITE drip dispersal systems for fluid handling and for subsurface and surface dispersal of wastewater. Along with manufacturing, there is also the installation and operation of onsite products, controls, and drip systems.
-
-
-
-
-
Assured Automation
Plastic Valves
Manufacturer Overview
Assured Automation was founded in 1983 and is headquartered in Roselle, New Jersey. Assured Automation is an ISO 9001:2015 certified supplier of automation equipment serving manufacturing, chemical, and pharmaceutical industries among others. Assured Automation offers products in 2 major product lines: valves and flow meters. Valves include compact on/off valves, actuated 2-way and 3-way ball valves, actuated butterfly valves, actuated plug valves, actuated globe valves, manual gate valves, manual valves, lead free brass valves, thermal and remote shutoff valves, valve actuators, and valve & actuator accessories. Flow meters include water meters, fuel meters, industrial flow meters, lube-oil meters, and others.
-
-
-
-
-
Marquest Scientific, Inc.
Plastic Valves
Manufacturer Overview
Marquest Scientific was founded in 1967, and is based in Costa Mesa, CA, is a manufacturer and supplier of thermoplastic products that have applications in the fluid handling&control industry. The company provides Needle Valves, Gauge Guards, Laboratory Faucets&Turrets, Lab Base Fixtures, and, Spray Guns that are available in PVC, CPVC, Polypro, & PVDF forms. Their services include Precision injection molding, Injection presses ranging from 20 to 500 tons, Quick-turn CNC machining for rapid prototyping and production as well as 3D Printing Prototyping, Secondary Services, Part assembly&Packaging, and Long&Short-run production.
-
-
-
-
-
Hayward Flow Control
Plastic Valves
Manufacturer Overview
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
-
-
-
-
-
Air Logic Division of Knapp Mfg., Inc.
Plastic Valves
Manufacturer Overview
Air Logic’s parent company was started in 1935. In 1975, the parent company purchased Johnson Controls’ Fluidic Division and renamed it Air Logic, operating out of Milwaukee, Wisconsin. The company is an ISO 9001:2015 certified manufacturer of standard and custom molded components and fittings to customers in the United States and overseas. The company’s primary product categories include orifices, filters, check valves, switches, and regulators. The company also offers custom manufacturing through options of orifice and fitting sizing, as well as custom molding and material varieties.
-
-
-
-
-
Coronet Parts Mfg. Co., Inc.
Plastic Valves
Manufacturer Overview
Coronet Parts Manufacturing Company Inc. was founded in the early 1960s and headquartered in Brooklyn, New York. The company is a custom manufacturer of industrial hardware and fittings serving the automotive industry and plumbing industry among others. The company’s product lines include fittings, valves, assemblies, and other tools. Plumbing specialty items include tank levers, flood stoppers, and supply tubes. Assorted tools include tube cutters, bending tools, flaring tools, and related parts.
-
-
-
-
-
Century Instrument Co.
Plastic Valves
Manufacturer Overview
Century Instrument Co is a diaphragm and valve manufacturer based in Livonia, Michigan. Established in 1950, Century Instrument began as a diaphragm manufacturer for pneumatic operators but has since expanded to manufacturing process control valves for the food & beverage, water treatment, pharmaceutical, petroleum chemicals, paper, and utilities industries. Century Instrument’s lineup includes ASA and ASTM-certified diaphragm components in automatic and manual builds and spare parts for different diaphragm models such as 630H, 630C, and 630HRT. Century has a long customer list and a reputation for supplying quality process control valves and instrumentation.
-
-
-
-
-
Seelye Acquisitions, Inc.
Plastic Valves
Manufacturer Overview
Seelye, Inc. includes DJ Plastics and Tefen Products, USA. Seelye is a manufacturer of thermoplastic welders and welding-related equipment. Seelye has 3 product segments: hot air plastic welders, Tefen fittings and products, and DJ custom tank fabrication. Hot air plastic welders include plastic welders, thermoplastic welding rods, plastic welding tips, welder elements, welder replacement parts, optional equipment, and master appliance heat guns. Tefen fittings and products include tight push fittings, barb block fittings, general industrial accessories, and air blow guns. DJ Custom tank fabrication examples include plating tanks, dip tanks, and water holding tanks among others.
-
-
-
-
-
Dynalab Corp.
Plastic Valves
Manufacturer Overview
Dynalab Corp was founded in Rochester, New York in 1957. Together with its wholesale division, Dynalon Labware, Dynalab produces and distributes standard and custom-made scientific equipment and laboratory supplies across North America. Science equipment and sampling apparatus offerings include hygrometers, mailing point devices, rollers, water stills, powders, seals, various samplers, and drills. Some of Dynalab’s laboratory supplies include Azlon plastics, burn-up boxes, desiccators, hydrometers, pipettes, shields, stopcocks, tote boxes, tubing, and watch glasses.
-
-
-
-
-
Xylem Inc.
Plastic Valves
Manufacturer Overview
Xylem Inc. was incorporated in 2011 and is headquartered in Washington, District of Columbia. Xylem engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications across global markets. Xylem operates through three segments: water infrastructure, applied water, and measurement & control solutions. Xylem’s water infrastructure segment offers numerous products such as water pumps, filtration, disinfection, and biological treatment equipment. Xylem’s applied water segment distributes pumps, valves, heat exchangers, controls, and dispensing equipment systems. Xylem’s measurement & control Solutions segment offers devices such as smart meters, networked communication devices, data analytics, test equipment, controls, sensor devices, and software and managed services.
-
-
-
-
-
Plast-O-Matic Valves, Inc.
Plastic Valves
Manufacturer Overview
Plast-O-Matic was formed in 1967 in New Jersey, now situated in Cedar Grove, New Jersey. Plast-O-Matic serves aquarium, chemical dosing, chemical processing, metal finishing, semiconductor, wastewater treatment, water purification, and government application industries. Product offerings include product data sheets, CAD downloads, installation & maintenance instructions, ball valves, check valves, gauge guards, pressure regulators, process cooling sticks, anti-siphon valves, shut-off and diverter valves, sight glass & level indicators, solenoid valves, venting valves, other process controls & pumps, and custom valves.
-
-
-
-
-
EVSCO, Inc.
Plastic Valves
Manufacturer Overview
EVSCO, Inc. is an Illinois-based elliptic valve manufacturer founded in 1980. The company produces a variety of valves for manual, electric, and pneumatically-actuated systems that operate on gas or pressurized air for standard and customized flow patterns. Its valves are available in polypropylene or PVDF (polyvinylidene difluoride) thermoplastic and are shipped with standard Viton (fluoroelastomer material) seals. Further, EVSCO produces a stack valve that can be combined with other valves and utilized as a signal unit.
-
-
-
-
-
International Polymer Solutions, (iPolymer)
Plastic Valves
Manufacturer Overview
International Polymer Solutions (iPolymer) is headquartered in Irvine, California. iPolymer is a manufacturer of high purity fluid valves, cylinders, and related arts used in semiconductor, biomedical, pharmaceutical, food and sanitary processes, high-purity laboratory, and other general chemical handling environments. iPolymer’s product categories include PTFE fittings & connectors, PTFE spray guns & devices, solenoid valves, pneumatic valves, manual valves, other flow devices, air cylinders, and custom polymer fabrication and assembly. Custom fabrication includes custom plastic fabrication, precision CNC machining of plastics, custom fluid control products, and contract assembly services.
-
-
-
-
-
Colonial Engineering, Inc.
Plastic Valves
Manufacturer Overview
Colonial Engineering, Inc. was founded in 1972 and is headquartered in Portage, Michigan. The company is a manufacturer of CNC, injection-molding, and other assembly and sub-assembly components for such industries as water treatment, automotive, HVAC, and industrial OEM. The company’s custom injection molding processes include molding, assembly, and fabrication using numerous materials such as PVC, Acetel, Nylon, Santoprene, and related thermoplastic polymers. The companys standard product lines include plastic valves, valve actuation devices, thermoplastic gear driven valves, unions, and butterfly valves.
-
-
-
-
-
Stra-Val
Plastic Pressure Relief Valve
Company Overview
Stra-Val, founded in 1988 with headquarters in the USA, is an on-demand manufacturer of relief valves, pressure regulators, back pressure regulators, and strainers. Stra-Val designs and manufactures its own line of products that include valves, basket strainers, and regulators for liquids and gases. Its products are available with threaded, flanged, or quick-clamp connections to maintain sanitary connections and are made of materials that include stainless steel, hastelloy, titanium, and plastics. Orders can be placed by customers via the company's website, and it also serves distributors, resellers, and original equipment manufacturers.
-
-
-
-
-
East Bay Distributors Inc.
Plastic Valves
Company Overview
East Bay Distributors, Inc. is a distributor for pneumatic applications, specializing in connectors, fittings, and industrial parts used across industries by both small companies and Fortune 500 corporations. The company’s distribution categories include SPC Fittings, SPC Products, Brass Fittings & Adapters, and Accessories. The company also features Dewalt protective products, including eyewear and work gloves. The company’s inventory management systems for customers offers benefits of lowering inventory costs, improving cash flow, and savings customers time and resources.
-
-
-
-
-
Rainmaker Pump Stations
Plastic Valves
Company Overview
RainMaker Pump Stations was founded in 2001 and is based in Lexington, South Carolina. The company is a manufacturer of custom-engineered products for commercial, governmental, and residential customers. The company has five product lines: Industrial/Municipal, Agricultural Irrigation, Landscape Irrigation, Pump Controls, and Accessories. Through these lines, the company produces individual pumps, complete pumping systems, individual starters and control boxes, and other necessary components and fittings. The company’s other services include custom fabrication, startup, installation, and repairs for systems and individual products.
-
-
-
-
-
G.A. Murdock, Inc.
Plastic Valves
Company Overview
G.A. Murdock was founded in 1992 and is based in Madison, South Dakota. The company is both a manufacturer and a distributor of the valve, fitting, and filters to customers around the world. Brands the company carries include Aquate, HM Digital, Relton, and Tomlinson. Through its in-house production, the company molds, extrudes and assembles molding products and turnkey custom plastics manufacturing services under the Mur-lok brand. The company’s other product line offerings include chemicals, instruments, pressure gauges, and tools.
-
-
-
-
-
TVI Valves
Plastic Valves
Company Overview
TVI Valves was originally founded in 1986 and is currently headquartered in Emmaus, Pennsylvania. The company is a distributor of valves and accessories to numerous industries ranging from amusement parks to health care to photography to water purification. The company’s four primary product lines are Plastic Valves, Metal Valves, Instrumentation, and Valve Accessories. Examples of valves include ball, butterfly diaphragm, and plug valves. Valve accessories include actuators, stem extensions, gears, fasteners, and other devices.
-
-
-
-
-
Electricsolenoidvalves.com
Plastic Valves
Company Overview
ElectricSolenoidValves.com (ESV) is a retailer and distributor of solenoid valves to the industrial and automation market based in New York. The company carries a line of solenoid valves consisting of brass valves, stainless steel valves, plastic valves, and 3-way valves, as well as accessories for valve applications. ESV also accepts special orders in case the wanted product is not in the catalog. The company’s products are accessible not only to professionals and manufacturers but also to DIY homeowners.
-
-
-
-
-
Brownlee-Morrow Company
Plastic Valves
Company Overview
Brownlee-Morrow Company was founded in 152 and is headquartered in Birmingham, Alabama. Brownlee-Morrow is a full-line pump and fan distributor as well as service provider serving the municipal, industrial air, liquid handling, power generation, mining, automotive, chemical, pulp and paper, primary metals, marine, and poultry industries. Brownlee-Morrow services include repair and field service, system design, and well drilling. Brownlee-Morrow’s products include air handling & control, air pollution control, fans and blowers, pumps, pump accessories, seal products, macerators, softstarters, conveyors, sludge treatment, and filtration.
-
-
-
-
-
Distributor to Industry, Inc.
Plastic Valves
Company Overview
Distributor to Industry, inc (dti) is based in Wichita, Kansas and has a history as a distributor going back over 40 years serving the oil drilling, rig, workover rig, and oil well pulling unit industries. dit offers 5 primary product categories: adhesives and sealants for aerospace, automotive, and industrial applications, air valves for marine, mobile, & oil field industries, air valves couplings & manifolds, pneumatic/hydraulic fittings & couplings, and fluid power process instrumentation & process control equipment.
-
-
-
-
-
Jensen Inert Products
Plastic Valves
Company Overview
Jensen Inert Products was founded in 1988 and is headquartered in Coral Springs, Florida. Jensen Inert Products is a manufacturer and distributor of non-contaminating, chemically resistant products made of fluoropolymers, silicone, and other inert materials used in the analysis, sample collection, distillation, processing, and product storage for industries including pharmaceutical, medical, electronics, and aerospace industries. A sample of Jensen Inert Products product lines includes gloves, bottles, cap liners, tubing, and syringes. Jensen Inert Products offers custom die cutting of gaskets, liners, and other components of thicknesses depending on the material.
-
-
-
-
-
Holyoke Fittings, Inc.
Plastic Valves
Company Overview
Holyoke Fittings, Inc. has a 100-year history dating back to its founding in Massachusetts and is now based in Brooklyn, New York. Holyoke Fittings is a distributor of fittings to the plumbing, heating, air-conditioning, gas, and refrigeration industries. Holyoke maximizes domestically manufactured products. Holyoke Fitting’s product line includes various types of fittings, valves, hoses, and tubing. Holyoke Fittings also offers specialty items commonly used in the plumbing, airline, and lubrication sectors.
-
-
-
-
-
Industrial Specialties Mfg., Inc.
Plastic Valves
Company Overview
Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.
-
-
-
-
-
RED-WHITE VALVE CORP.
Plastic Valves
Company Overview
RWV was founded in 1971 as a joint venture between Mitsui & Company, Ltd. and Toyo Valve Company, Ltd. of Japan as Red White Valve Corp. In 2003, the company joined Valvoindustria Ing. Rizzio of Italy and today is headquartered in Lake Forest, California. The company is an ISO 9001:2015 and 14001:2015 certified manufacturer of valves for various industries, sold through stocking and non-stocking distributors. The company’s valve products by category include lead-free, hydronic, standard, and commercial & industrial valves. The company’s products by type include balancing, ball, butterfly plumbing, and radiator valves.
-
-
-
-
-
Asahi/America, Inc.
Plastic Valves
Company Overview
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
-
-
-
-
-
United States Plastic
Plastic Valves
Company Overview
United States Plastic Corporation, founded in 1936 and based in Lima, Ohio, is a manufacturer and distributor of plastic products. The company distributes over 30,000 plastic products, including buckets, bottles, and tanks for industrial and commercial use. The company also offers other products like valves, pumps, and labware, while its manufacturing division, Tamco Industries, can customize products to meet specific requirements. In 1955, the founder established a foundation that took 100% company ownership. The foundation donates 100% of the company’s yearly dividends to support communities worldwide by bringing tangible support.
-
-
-
-
-
The Cary Company
IBC Tote Valves
Distributor Overview
The Cary Company, founded in 1895 and headquartered in Addison, Illinois, is a supplier of container, packaging, and spill control products and solutions. It stocks products like pails, plastic jars, and caps used in several industries, including construction, industrial chemicals, and personal care. The company provides several services, including label application, bottle design and manufacturing, and product sourcing. In 2018, it acquired Gurman Container & Supply Corporation, which helped it expand in the rigid packaging industry. Later, in 2019, it acquired Three Rivers Packaging Inc. to grow its drum and tote offering.
-
-
-
-
Distributor Overview
Fillauer, founded in the United States in 1914, is a supplier of prosthetic and orthotic devices, and pediatric solutions. The company's product portfolio includes a comprehensive range of prosthetic limbs, including below-knee, above-knee, and upper limb prostheses, as well as specialized devices for specific needs. It also provides a variety of orthotic devices, such as ankle-foot orthoses (AFOs), knee-ankle-foot orthoses (KAFOs), spinal orthotics, and more, tailored to address musculoskeletal issues.
-
-
-
-
-
Strahman Group
Plastic Valves
Distributor Overview
BI-TORQ Valve Automation was founded in 1981 and is now part of STRAHMAN Group. BI-TORQ is a distributor of plant optimization and safety products including valves and actuators used in oil & gas, food & beverage, manufacturing, pharmaceutical, and other industries. The company’s primary product lines include thermal shut-off valves, ball and butterfly valves, actuators, and knife gates. The company also sells accessories & repair kits including limit switches, NAMUR solenoids, and spring return handles.
-
-
-
-
-
Liquidyne Process Technologies, Inc.
Plastic Valves
Distributor Overview
Founded in 1993, Liquidyne Process Technologies serves the dairy, brewery, distillery, biotech, pharmaceutical, & cannabis industries. Liquidyne offers a full line of sanitary and single-use products including process equipment components, sanitary equipment, single-use pumps and valves, single-use fittings and connectors, custom single-use assemblies, sanitary hose assemblies, sanitary valves, and single-use bioprocessing systems. Liquedyne produces all equipment in an ISO14644 Class 7-certified cleanroom has also attained 9001:2015, USP Class VI Testing, ASME Bioprocessing Equipment, and EHEDG certification status. Liquedyne also offers process optimization and on-site process audit & evaluation services.
-
-
-
-
-
Orr & Orr, Inc.
Plastic Valves
Distributor Overview
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
-
-
-
-
-
Ryan Herco Flow Solutions (HQ)
Plastic Valves
Distributor Overview
Ryan Herco Flow Solutions was founded in the 1950s in California. RHFS sells and provides value added support for a wide variety of fluid handling and filtration needs. Product categories include tubing, hoses, piping, drain waste vent & containment, valves, measurement & control devices, fluid pumps, filters & housings, storage & containment tanks, heaters, mixers, and grating in addition to customized systems and material fabrication. Value added services include industrial service and repair of components, custom fabrication, and pump repair services.
-
-
-
-
-
PureValve Thermoplastic Valves
Thermoplastic Valves
Manufacturer Overview
PureValve Thermoplastic Valves is a manufacturer specializing in advanced valve solutions based in Spain. The company caters to Chemicals, Water Treatment, Pharmaceuticals, Manufacturing, and Semiconductor sectors. Its range includes Ball Valves, Diaphragm Valves, Butterfly Valves, Check Valves, and Globe Valves, among more control instruments. These engineered solutions optimize fluid control, ensuring corrosion resistance, precise flow regulation, and leak-tight sealing across critical applications in industries that prioritize stringent material compatibility and reliability standards.
-
-
-
-
-
ERA Co,Ltd.
Union Ball Valve
Manufacturer Overview
ERA Co. Ltd. is a manufacturer of plastic piping systems, valves, and fittings founded in 1983 and headquartered in Zhejiang, China. The company specializes in PVC, PPR, CPVC, PE, and PP piping systems. It provides plastic valves, pressure pipes and fittings, rain gutters, electric conduits, and various accessories. These products obtained UPC, TUV, ACS, GOST, and WATERMARK certifications and cater to the global plastic pipe sector. The company is a subsidiary of ERA Group, a large-scale group specializing in piping research, production, and sales with eight production facilities in China.
-
-
-
-
-
Nihon Pisco Co., Ltd.
Fluororesin Needle Valve
Manufacturer Overview
Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.
-
-
-
-
-
Asahi Organic Chemicals Industry
Plastic Valve
Manufacturer Overview
ASAHI YUKIZAI CORPORATION, formerly known as Asahi Organic Chemicals Industry, is a Japanese manufacturer headquartered in Taito-ku, Tokyo, and specializes in resins and plastic valves since its establishment in 1945. The company manufactures valve and piping systems, including manual & automatic valves, pipes, fittings, and mixers. It also offers various foundry materials such as resin and sand products for casting, along with functional resins which cater to housing, construction, and industrial applications. The company engages in the design and construction of water utility facilities & reuse of wastewater, industrial water & wastewater treatment, environmental pollution prevention & purification, and public sewage management.
-
-
-
-
-
NICHIAS Corporation
Plastic Valve
Manufacturer Overview
Nichias Corporation, founded in 1896 and headquartered in Tokyo, Japan, is a manufacturer and seller of building materials, auto parts, advanced, industrial, and energy products. In 1938, it became the first Japanese company to manufacture rock wool products, and in 1952, it began making spiral wound gaskets. It aims for carbon neutrality by 2050 and is engaged in recycling rock wool product scraps from its plants and construction sites. Its manufacturing establishments in Japan and overseas have ISO 14001, and its product portfolio includes sealing materials, fluoro resin products, heat insulators, calcium silicate boards, and rubber composite gaskets.
-
-
-
-
-
SAFI
Industrial valves
Manufacturer Overview
SAFI is an ISO 9001-certified manufacturer specializing in corrosion-resistant plastic valves that was founded in 1963 and headquartered in Taulignan, France. The company specializes in producing industrial-grade, anti-corrosion thermoplastic and composite valves. Its products include butterfly valves that control or isolate the flow of liquids, ball valves for liquids or gasses, and diaphragm valves for sensitive or corrosive materials. It also offers related accessories such as actuators, sight glasses, and strainers. The company's products are mainly used in industrial processing facilities by clients in the petrochemical, water treatment, and power generation sectors.
-
-
-
-
-
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
Plastic diaphragm valves
Manufacturer Overview
GEMÜ Group is a manufacturer of valves, measurement, and control systems for liquids, vapors, and gases, founded in 1964, the company is headquartered in Ingelfingen, Germany. The Group serves a wide range of industries, including pharmaceuticals, biotechnology, semiconductors, food and beverage, and chemical technology and more. Their solutions help customers reduce their carbon footprint and improve the sustainability of their operations.They have six manufacturing locations, alongside their manufacturing sites in Germany, they also manufacture their products in Switzerland, France, China, Brazil and the USA. Their worldwide marketing is carried out across 27 subsidiaries, coordinated from Germany.
-
-
-
-
-
IPEX
Plastic Valves
Manufacturer Overview
IPEX by Aliaxis is headquartered in Oakville, Ontario. IPEX is a producer of pipe-related solutions defined in 6 categories: municipal, plumbing & mechanical, industrial, electrical, PE electrofusion, and irrigation. The company's municipal solutions include pressure piping and sewer piping systems in addition to specialty products. Plumbing & Mechanical solutions also include fire protection, gas venting systems, and potable water systems. Compressed air and acid waste systems are used in industrial systems. Light fixtures and ducts are keystones of the electrical solutions segment.
-
-
-
-
-
GF Piping Systems.
plastic shower valve
Manufacturer Overview
Georg Fischer Piping Systems Pvt. Ltd is headquartered in Mumbai, India, and is an ISO 9001-certified manufacturer of plastic as well as metal piping systems that was established in 2007 as a subsidiary of Georg Fischer AG. The company produces piping system components and complete systems for industrial or automation operations. These products include pipes, valves, and fittings made from polyethylene (PE) or polypropylene (PP). It offers automation system components including actuators, sensors, and multi-parameter controllers. The company also offers additional services, such as custom engineering, prefabrication, and installation.
-
-
-
-
-
Merrill Mfg. Co.
PLASTIC FLOAT VALVE
Manufacturer Overview
Merrill Manufacturing Company, founded in 1949 with the invention of the Any Flow Yard Hydrant, has headquarters in Storm Lake, Ohio, USA and is a manufacturer of garden hydrants and related plumbing and ground well products. The company's product line includes frost-proof yard hydrants, frost-proof wall faucets, pitless units, insert fittings, and water well accessories. These products are used for various garden watering systems, toilet flushing systems, and other residential and commercial plumbing systems.
-
-
-
-
-
Rain Bird Corporation
Residential Valves
Manufacturer Overview
Rain Bird Corporation has been a manufacturer of irrigation products headquartered in California, USA, since 1933. The company has manufacturing facilities in the United States, China, France, and Mexico. Its offerings include a wide range of irrigation products, including sprinklers, drip irrigation systems, timers, controllers, and other related components. The company also offers various educational resources to help customers learn about water conservation. One sample product is its XFS drip irrigation system. This product is designed to deliver water directly to the roots of plants and is ideal in various applications, including landscaping, gardens, and orchards.
-
-
-
-
-
Saint-Gobain in Japan
Valves
Manufacturer Overview
Saint-Gobain in Japan, established in 1917 and headquartered in Tokyo, Japan, is a manufacturer and distributor of materials and solutions for construction, mobility, healthcare, and various other industrial applications. The company's product portfolio includes glass ceramics, abrasive products, performance plastics, glass wool, and automotive glass. These products are applied in various industries, including automotive, aeronautical, healthcare, defense, and the food and beverage industry. The company holds both ISO 9001 and ISO 14001 certificates, as well as an OHSAS 18001 certificate for quality and EHS (Environmental Health and Safety) systems.
-
-
-
-
-
Saint-Gobain Life Sciences
Plastic Valves
Manufacturer Overview
Saint-Gobain Life Sciences, headquartered in Solon, Ohio, is a manufacturer of polymer solutions and components that support the electronics, medical, and biopharma industries, among others. Its bioprocess solutions division provides material science-based solutions like silicone tubing and filtration products for single-use fluid management. The medical business manufactures custom medical components like cartridges and capsule filters and designs systems for medical devices. The consumer solutions business provides customer support to achieve performance, safety, and regulatory compliance, and it provides customized solutions like flowmeters, seals, and tubing. The electronics division manufactures products like valves and fittings for fluid handling applications.
-
-
-
-
-
Zoeller Company
Plastic Valves
Manufacturer Overview
Zoeller Company was founded in 1939 and currently is based in Louisville, Kentucky. The company is an independent manufacturer of pumps and related equipment through numerous divisions. Some of these divisions include Star Water Systems, Tulsar Custom Controls, Lincoln Industries, Flint & Walling, and Wolf Customized Pumps. Zoellar Family of Water Solutions has four product segments: Water Movement In, Water Movement Out, Water Treatment, and Controls. Each unit serves residential, municipal, industrial, and commercial systems and customers.
-
-
-
-
-
Praher Plastics Austria GmbH
Plastic Valves
Company Overview
Praher Plastics Austria GmbH is a manufacturer and distributor of industrial piping system products made from technical plastics that was established in Schwertberg, Austria, in 1971. The company produces unplasticized PVC (PVC-U) pipes, fittings, and accessories for a range of industrial applications. It also offers various valves, such as diaphragm, check, and multiport models of different sizes and series. The company is certified to ISO 9001 standards, and chiefly serves clients in Austria’s industrial chemical, water treatment, and biotech industries.
-
-
-
-
-
Max-Air Technology Inc.
Manual Plastic Ball Valve
Company Overview
Max-Air Technology Inc. established in 1999 and based in Wentzville, Missouri, USA, is a manufacturer and distributor of automation solutions and rotary actuators. The company's product range includes automated butterfly valve packages, control butterfly valves, midrange ball valves, and premium ball valves. These products are used in precise regulation and management of fluid flow in various systems. Serving sectors such as industrial automation, fluid control, manufacturing, and processing, these products ensure smooth operation of equipment. The company's services include specification, calibration of custom actuated valve assemblies, and testing of the assembled units.
-
-
-
-
-
Tank Truck Service & Sales, Inc.
Plastic Valves
Company Overview
Tank Truck Service & Sales, Inc. has been designing and building tank trucks since 1948 and is based in Warren, Michigan. The company is a manufacturer, assembler, and distributor of tank trucks and trailers. The company's product offerings include parts and components including tank truck equipment, bulk plant and storage tank equipment, dry break or dry disconnect fittings, valves, hose, hose reels, meters, swivel joints, gaskets, and pipe sealants. Tank truck offerings include refined fuel trucks and trailers, LGP trucks, and specialty tank trucks. Additionally, The company offers metalwork, equipment work, dot testing, paintwork, and sensor repairs.
-
-
-
-
-
NovoSci Corp.
Plastic Valves
Company Overview
NovoSci Corp., established in Conroe, Texas, in 1989, is a manufacturer and distributor of disposable medical devices. The company's product portfolio includes disposable surgical instruments, including scalpels, forceps, scissors, Catheters and Tubing. Their products are used in Hospitals and Clinics, Ambulatory Surgical Centers, Long-Term Care Facilities and Home Healthcare Providers. The company provides Quality Assurance, Technical Support, global distribution, customized services and customer support. The company also has project management, warehousing and custom manufacturing services.
-
-
-
-
-
Motion Industries, Inc.
Plastic Valves
Company Overview
MiMotion was founded in 1946 in Birmingham, Alabama and today operates under Genuine Parts Company. The company operates as a distributor and supplier of custom parts for both maintenance repair and operating replacement part market and the OEM market. The company’s product line includes many types of products including abrasives, chemicals & lubricants, hand & power tools, hose & fittings, and process pumps & equipment. The company also provides maintenance repair and operating replacement parts as well as OEM parts ensuring compatibility with existing customer operations.
-
-
-
-
-
Flocon Valves Pipes & Fittings
PVC Plastic Valves
Company Overview
Flocon Valves Pipes & Fittings, with its establishment in 1990 and headquarters in Wales, operates as a distributor and supplier of industrial valves, pipes, and fittings. The company's product range includes ndustrial valves such as ball valves, gate valves, and butterfly valves, as well as pipes and fittings for various applications. It caters to industries including oil and gas, water treatment, and manufacturing, among others. Its products are used for regulating the flow of fluids and materials in pipelines and industrial systems, ensuring efficient operations in critical processes across these industries.
-
-
-
-
-
Ningbo Baodi Plastic Valve Co., Ltd.
VALVES
Company Overview
Ningbo Baodi Plastic Valve Co., Ltd., founded in 1994 and headquartered in Beilun, Ningbo, Zhejiang, China, manufactures plastic valves, pipes, and fittings. The company offers a range of products, including plastic ball valves, diaphragm valves, butterfly valves, check valves, and globe valves, along with various plastic pipes and fittings. These products are constructed from materials like FRPP, PVDF, UPVC, CPVC, and PPH. It holds an ISO9001 quality system certification and possesses over 20 valve patents.
-
-
-
-
-
-
-
Bosta
Plastic Valves
Company Overview
Bosta, a company established in 2017, based in Cairo, Egypt, is a provider and exporter of courier and logistics services. The company offers product solutions for various business and e-commerce needs such as overnight delivery, next-day cash collection, globally shipping, and premium fulfillment service. It uses advanced technology and efficient operations to deliver fast, dependable, and transparent services to its customers. It also provides technical support, catalog request, and customized services through its dashboard, mobile app, and API integrations.
-
-
-
-
-
-
-
-
-
-
-
Grover Products Company
Plastic Universal Valve
-
-
-
-
-
GardenGrow
Plastic Shut-Off Valve
-
-
-
-
-
Keyhole Enterprise
Plastic PVC 2″ Ball Valve
-
-
-
-
-
Johnson Valves
Plastic Ball Valves
Distributor Overview
Johnson Valves, based in Southampton, United Kingdom, is a supplier of engineering products for pressure safety, fluid control, and metering. Its product portfolio includes isolation valves, water meters, and pipe fittings, which it sells in the UK and worldwide. The company serves a range of markets, including the boiler, HVAC, and water industries, and offers complete valve and actuation services. Johnson Valves is ISO 9001 and ISO 14001 certified and has been a distributor of Asco Numatics products for over two decades. It is a BVAA member, SafeSupplier verified, JOSCAR accredited, and Cyber Essentials certified.
-
-
-
-
-
Interstate Pipe & Supply Co.
Plastic Valves
Distributor Overview
Interstate Pipe & Supply Company was established in 1968 and operates out of Butler, Pennsylvania. Interstate Pipe & Supply is a distributor serving municipal and industrial customers such as the oil and gas industry. Interstate Pipe & Supply products include pipes, valves, fittings, pumps, industrial products, municipal products, water, oil, gas well products, well pad products & accessories, tanks, tools, plumbing fixtures & appliance products, catch basins & trench drains, as well as accessories.
-
-
-
-
-
DXP Cortech
Plastic Valves
Distributor Overview
DXP Cortech was founded in 1987 and is based in Anaheim, California with offices across California and Nevada. DXP is a distributor of pumps and process equipment for food, pharmaceutical, industrial, mining, water P& wastewater treatment, energy, and wine industries. DXP provides services such as laser pump alignment, shop and field testing and calibration, on-site pump training, and design support and application engineering. A sample of DXP products include metering, screw pumps, submersible pumps, self-priming pumps, lobes, grinders, blowers and compressors, mechanical seals, and drums.
-
-
-
-
-
PEP, A Ryan Herco Flow Solutions Company
Plastic Valves
Distributor Overview
Plastic Engineered Products, Co. is owned by the Ryan Herco Flow Solutions Company and is a a distributor of fluid handling, control and high value filtration systems for corrosive and ultrapure systems. PEP offers both sales as well as services. Sales offerings include tubing, hoses, measurement & control devices, housings, tanks, and pumps. Services include custom plastic & fiberglass fabrication while field servies include emergency repair as well as maintenance and testing as well as fabrication and welding.
-
-
-
-
-
Go To Tanks
Plastic Valves
Distributor Overview
Go To Tanks, founded in 1996 and located in Edmonds, Washington State, is a distributor of stock and custom-built plastic storage tanks and accessories. Its broad range of product lines includes cone-bottom tanks, portable utility tanks, open-top tanks, septic tanks, and stackable totes. These products serve specific applications across industries, such as agriculture, industrial processes, water treatment, waste management, and chemical storage. Go To Tanks' offerings provide efficient solutions for liquid storage, transportation, and containment in different sectors.
-
-
-
-
-
Pacific Bay Equipment - Formerly Hosty Pacific
Plastic Valves
Distributor Overview
Pacific Bay Equipment was founded in 1987 in Modesto, California, where it is still headquartered today. The company serves agriculture, marine, manufacturing, waste management, and other industries as a distributor of cleaning, pressure washing, and related machinery and equipment. The company’s product segments include both machines and other equipment. Machines include floor scrubbing machines, sprayers, steam cleaners, and generators. Other equipment includes detergent, parts, and accessories. In addition to new equipment, the company also offers used equipment, repair, rentals, and trade-ins.
-
-
-
-
-
Guenther Supply, Inc.
Plastic Valves
Distributor Overview
Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.
-
-
-
-
-
Green Rubber-Kennedy AG, LP
Plastic Valves
Distributor Overview
Green Rubber Kennedy Ag (GRKA) is the merger of two companies, both born in California’s Salinas Valley in 1990. The company has several distribution segments including Food Processing, Transportation & Baggage Handling, Wine and Brewing, Recycling, and Mining, Sand, and Gravel. The company excels in conveyor belt and related materials and also offers abrasion control products, sheet products & rubber goods, safety and sanitation products, industrial hose and assemblies, as well as offering specialized services.
-
-
Plastic Valve Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Plast-O-Matic Valves, Inc. |
4.9%
|
| 2 | ITT Engineered Valves |
3.6%
|
| 3 | Valtorc International |
3.1%
|
| 4 | Micromold Products, Inc. |
2.9%
|
| 5 | NIBCO INC. |
2.7%
|
| 6 | R/C Machining Company |
2.7%
|
| 7 | Hog Slat |
2.7%
|
| 8 | Badger Meter, Inc. |
2.7%
|
| 9 | Leader |
2.6%
|
| 10 | Marquest Scientific, Inc. |
2.4%
|
Derivation Method
The ranking is calculated based on the click share within the plastic valve page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- NICHIAS Corporation: 6,445
- Asahi Organic Chemicals Industry: 1,555
- Hog Slat: 1,000
Newly Established Company
- Salvador Industrial Co., Ltd: 2004 (20 years ago)
- GardenGrow: 1998 (26 years ago)
- Ningbo Baodi Plastic Valve Co., Ltd.: 1994 (30 years ago)
Company with a History
- The Cary Company: 1895 (129 years ago)
- NICHIAS Corporation: 1896 (128 years ago)
- NIBCO INC.: 1904 (120 years ago)
Plastic Valve Manufacturers in United States
*Including some distributors, etc.
- ITT Engineered Valves
- Hog Slat
- Leader
- R/C Machining Company
- NIBCO INC.
- Badger Meter, Inc.
- Micromold Products, Inc.
- Valtorc International
- American Manufacturing Co., Inc.
- Assured Automation
- Marquest Scientific, Inc.
- Hayward Flow Control
- Air Logic Division of Knapp Mfg., Inc.
- Coronet Parts Mfg. Co., Inc.
- Century Instrument Co.
- Seelye Acquisitions, Inc.
- Dynalab Corp.
- Xylem Inc.
- Plast-O-Matic Valves, Inc.
- EVSCO, Inc.
- International Polymer Solutions, (iPolymer)
- Colonial Engineering, Inc.
- Stra-Val
- East Bay Distributors Inc.
- Rainmaker Pump Stations
- G.A. Murdock, Inc.
- TVI Valves
- Electricsolenoidvalves.com
- Brownlee-Morrow Company
- Distributor to Industry, Inc.
- Jensen Inert Products
- Holyoke Fittings, Inc.
- Industrial Specialties Mfg., Inc.
- RED-WHITE VALVE CORP.
- Asahi/America, Inc.
- United States Plastic
- The Cary Company
- Fillauer
- Strahman Group
- Liquidyne Process Technologies, Inc.
- Orr & Orr, Inc.
- Ryan Herco Flow Solutions (HQ)
Global Distribution of Plastic Valve Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
42 | 71.2% |
China
|
4 | 6.8% |
Japan
|
3 | 5.1% |
United Kingdom
|
3 | 5.1% |
France
|
2 | 3.4% |
Spain
|
1 | 1.7% |
Germany
|
1 | 1.7% |
Canada
|
1 | 1.7% |
Austria
|
1 | 1.7% |
Republic of Korea
|
1 | 1.7% |
List of Plastic Valve Products
7 products are listed.
IBS Co., Ltd.
Made of check valve C5 series fluororesin
30+ people viewing
Last viewed: 13 hours ago
■ Features -The resin to be widelated is designed with fluorine resin. ・ Adopt a special fluorine resin spring. ・ By selecting various stickers, ...
IBS Co., Ltd.
Check valve CD series fluororesin made by PFA
30+ people viewing
Last viewed: 13 hours ago
■ Features -The resin to be connected is composed of PFA and PTFE. ・ We do not choose a joint specification for the tube. ・ Adopted a special spr...
IBS Co., Ltd.
Made of check valve CP series resin PP
50+ people viewing
Last viewed: 13 hours ago
■ Features ・ Small and lightweight and inexpensive for resin. -The main body material adopts PP, so it has excellent corrosion resistance. ・ The ...
