17 Laser Level Manufacturers in 2024
This section provides an overview for laser levels as well as their applications and principles. Also, please take a look at the list of 17 laser level manufacturers and their company rankings. Here are the top-ranked laser level companies as of November, 2024: 1.Ohio Power Tool, 2.Johnson Level & Tool Mfg. Co., Inc., 3.Kapro Industries Ltd..
Table of Contents
Categories Related to Laser Levels
What Is a Laser Level?
A laser level is a device for leveling with a laser point built into the level.
A level differs from an original level in some respects. Usually, a level is a device used to measure height differences with a set of bars called a staff with a memory. It is used in pairs, with one person in the role of holding the staff and the other person using the level.
However, a laser level can be used by a single person if the laser emitted from the level is received by a receiver instead of the person using the level. This reduces the number of personnel and improves work efficiency.
Applications of Laser Levels
Laser levels are mainly used in the fields of civil engineering and construction. Especially in construction, civil engineering, and interior work, the ability to easily level the ground improves site efficiency.
They are also often used for automatic measurement.
1. Rotating Laser
Rotational lasers can be easily leveled by an automatic compensation mechanism inside the machine. They are therefore used for placing ready-mixed concrete, finishing floor surfaces, and stacking concrete blocks.
2. Rotating Laser
The rotating laser is a laser level that has a slope setting function added to the rotating laser. It can set the slope in one or two directions from the horizontal reference plane and is used in large-scale construction projects because of the wide range of distances over which the laser can be received.
Principle of Laser Levels
To begin with, a level is an instrument that checks whether the ground is level with respect to a reference point or whether there is a difference in elevation with respect to a reference point. A normal level looks through a lens to check the reference point and then measures the level of difference in height of the target point.
The laser level uses an infrared laser to replace the peering function so that even with a small number of people and a distant target point, leveling can be done smoothly by using a receiver.
There are also some laser levels, such as the rotating laser mentioned above, that can be set to a gradient, and some are designed for construction equipment. However, laser levels are not strictly speaking in the category of levels.
They cannot be used for public surveying and are considerably less accurate than other levels. The farther away from the machine, the wider the emitted laser becomes and the less accurate it becomes. This is a drawback of laser levels.
Types of Laser Levels
Laser levels fall into two main categories: rotating lasers and rotating lasers. There are also laser markers for interior work.
1. Rotating Laser
Rotating lasers emit a laser beam through 360° so that all directions can be measured. By setting a receiver on the staff, it is possible to audibly confirm where the laser is hitting.
2. Rotating Laser
The Rotating laser is a laser level that combines the functions of a rotating laser with a slope setting. It can be used to set the level and slope of landscaping and grading, and can also be used with the receiver attached to heavy machinery while the operator is on board. Some laser levels have a reception distance of over 1,000 m, making them suitable for construction sites, agricultural land, and other large areas.
3. Laser Marker
Laser levels are used to project multiple laser beams onto walls, ceilings, and floors to create a reference line. Sometimes called an auto laser or line laser, it is characterized by its ability to illuminate an entire space at once.
Because the light does not blink, this product is suitable for indoor use; although it cannot emit a 360° laser beam, a remote control can be used to automatically change the direction of the beam, making it possible for one person to work smoothly.
However, this product is designed for indoor use. To maintain accuracy, it can only be used up to a distance of about 40 meters.
Other Information on Laser Levels
Calibration of Laser Levels
As is true of all measuring instruments such as laser levels, errors will occur during use due to deterioration of parts and vibration during transportation. For this reason, a process called "calibration" is necessary. Calibration is the process of comparing the measured values between the actual device and a standard device to check for any discrepancies.
If calibration reveals that adjustments are necessary, repairs are made. Repeating calibration and correction regularly ensures that the accuracy of the measuring instruments remains constant and ensures a high level of technical competence. Depending on the work order and ISO 9001, calibration records for measuring instruments must be submitted.
If the equipment is leased, the leasing company prepares and stores the records, but if the equipment is purchased, the company that purchased the equipment must take care of this.
List of 17 Laser Level Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Canada
- China
- Israel
- Japan
- Switzerland
-
-
-
Stanley Black & Decker, Inc.
LINE LASER LEVELS
Manufacturer Overview
Stanley Black & Decker, Inc., Since 1843, is a manufacturer of hand tools such as tape measures, outdoor instruments for gardening and lawn care, power tools, storage solutions, and workplace equipment for contractors and homeowners. The Joppa Road, Towson, Maryland-based company has worked with recyclers to allow users to return end-of-life devices to be recycled. Stanley assists non-profit groups such as Habitat for Humanity, which builds houses, Skills USA, which teaches kids technical skills; and Rebuilding Together, which repairs homes and revitalizes neighborhoods. A complete lifetime warranty covers Stanley Mechanical tools.
-
-
-
-
-
FLUKE Corporation
PLS Laser Levels
Manufacturer Overview
Headquartered in Everett, Washington, Fluke is an American-born company operating since 1948. Fluke offers a variety of testing equipment including digital multimeters, thermal cameras, solar PV testing equipment, thermometers, oscilloscopes, leak detection devices, as well as testing-equipment related accessories. Fluke offers direct online sales.
-
-
-
-
-
Johnson Level & Tool Mfg. Co., Inc.
Laser Level
Manufacturer Overview
Johnson Level & Tool Mfg. Co., Inc., established in 1963 with headquarters in the USA, is a manufacturer and supplier of measuring tools. The company's products include spirit levels, laser levels, construction squares, laser distance measuring tools, and tape measures. Johnson Level & Tool Mfg. Co., Inc. tools are used by industry and individual trade professionals. The company's products are available for purchase directly from the Johnson Level website. The company supplies replacement parts and repairs for all of its products.
-
-
-
-
-
Pinpoint Laser Systems
Laser Levels
Manufacturer Overview
Pinpoint Laser Systems founded in Peabody, MA, in 1992 is a manufacturer of precision measuring and alignment products for industrial applications. The company's product portfolio includes Versatile Measuring Products, Laser Alignment Systems and Bore Alignment and Spindle Alignment products. Their products are used in markets such as Automotive and Transportation, Telecommunications, Industrial Automation, Healthcare and Medical Devices and Aerospace and Defense. They also provide services including product selection, installation, preventative maintenance, troubleshooting, and repair.
-
-
-
-
-
Beiter Technologies USA LLC
Laser Level
Company Overview
Beiter Technologies USA LLC, established in 1982 and based in San Francisco, California, is a manufacturer and distributor of construction tools. It manufactures laser levels, cross lasers, line lasers, rotating lasers, and automatic optical levels. Its products are specially catered for contractors, construction, and surveyor sectors. Its products are utilized across North America, Europe, and Asia. The company is involved in several exhibitions, such as the Asia Pacific Sourcing in 2023, the World Of Concrete in 2018, and the China International Hardware Show in Shanghai, China in 2019.
-
-
-
-
-
Ohio Power Tool
Laser Levels
Company Overview
Ohio Power Tool, Inc was founded in Columbus, OH in 1983. OPT has 3 primary operating segments: sales, rental, and repair. Sales and rental segments include air compressors and other air tools, concrete & masonry saws, concrete core drills, cordless and electric corded tools, gas detection, generators, hand tools, hydraulic cylinders and pumps, inspection equipment, jobsite cleanup equipment, ladders and lifting equipment, levels, pipe cutting & threading equipment, as well as safety and storage equipment. The repair segment includes testing and recalibration and uses factory parts.
-
-
-
-
-
Metro Hydraulic
Laser Levels
Company Overview
Metro Hydraulic Jack Co. is a third-generation family run business in operation since 1941. MHJ is based in Newark, NJ. MHJ distributes hydraulic jack-related equipment, tools, and parts including a broad range of cylinders, motors, valves, presses, couplings, tools, hydraulic fittings, hoses, jacks, pumps, lifts, lubrication equipment, pallet stackers, scissor lifts, and workholding devices. MHJ also offers system design services as well as engineering services and extensive repair including testing, retrofitting, and overhauling.
-
-
-
-
-
DEWALT
LINE LASER LEVELS
Company Overview
Dewalt Inc. is a power tool manufacturing firm started in 1924 by Raymond DeWalt. It began as a small enterprise in Maryland but quickly expanded. They were reformed and reincorporated as DeWalt Inc. in 1947 and were purchased by American Machine & Foundry Co.Inc in 1949. Dewalt Inc. provides a diverse range of products such as power tools, hand tools, accessories, outdoor equipment, and workplace equipment. As of 2001, they produced and sold over 200 hand power equipment and 800 accessories. DeWalt is now a well-known tool brand among commercial contractors.
-
-
-
-
-
Prexiso AG
CROSS LINE LASER LEVEL
Manufacturer Overview
Prexiso AG, founded in 2009 and headquartered in Erien, Switzerland, is a manufacturer of precision measurement tools and instruments. The company offers a range of products, including laser distance measures, line lasers, point lasers, magnetic digital angle gauges, digital meat thermometers, and specialized environmental measurement tools. These instruments are designed for various applications, including accurately measuring distances, monitoring manufacturing processes, creating precise floor plans for property listings, and providing precise dimensions for surveying, construction, and manufacturing.
-
-
-
-
-
Shinwa Rules Co., Ltd.
Laser Level
Manufacturer Overview
Shinwa Rules Co. was founded in Niigata, Japan, in 1971. Shinwa Rules Co. develops a variety of measuring products including calipers, thermometers, hygrometers, laser optical apparatuses, and sheet heating elements. Above these, Shinwa develops metallic rulers and squares. Additionally, Shinwa operates as an OEM supplier for special calibrations and machine tools, special surface fabrication, and etching on metallic parts.
-
-
-
-
-
EBIC Tools Co., Ltd.
Laser Level
Manufacturer Overview
EBIC Tools Co., LTD was established in 2003 and headquartered in Nanjing, China. The company is a manufacturer of power tools that it sells globally through the brand FIXTEC. FIXTEC brand tools are used in masonry, woodworking, metalworking, and construction industries. The company sells cordless tools, power tools, hand tools, accessories, and safety products. Under the brand FIXTEC PPE for personal protective equipment, the company sells latex and PVC gloves, safety goggles, face shields, and tool vests.
-
-
-
-
-
HUEPAR.
Laser Level
Manufacturer Overview
Huepar, one of Zhuhai Levelsure Technology Co., Ltd.'s brands, was founded in 2013 with its main manufacturing facilities in China, and it is a manufacturer and supplier of measurement tools and levels. The company's products include laser levels, laser distance meters, magnetic screwdrivers, cordless power tools, and accessories. Huepar tools are used by trade professionals in the construction, engineering, electrical, and plumping industries. Purchases can be made directly from the company's website store. Huepar has more than 20 warehouses around the world and ships to over 130 countries and territories worldwide.
-
-
-
-
-
Kapro Industries Ltd.
Level
Manufacturer Overview
Kapro Industries Ltd., a company established in 1990 based in Kadarim, Israel, is a manufacturer of hand tools. It specializes in manufacturing spirit levels, laser levels, tape measures, and measuring wheels. It also manufactures tools such as markings and chalk lines. Its manufactured products cover several regions, such as Israel, the US, and China. It has a subsidiary company in the US, Kapro Tools Inc., located in Lake Mills, Wisconsin. The company acquired several certifications, such as SA 8000, ISO 9001, and ISO 14001.
-
-
-
-
-
Klein Tools, Inc.
Laser Levels
Company Overview
Klein Tools is a fifth-generation family-run producer of hand tools founded in 187 and headquartered in Lincolnshire, Illinois. Klein Tools sells worldwide directly and through distributors. Klein Tools has a family of companies under its brand including Alco, Civitella, Mumme Tools, Tulmex, and Wattmaster. Klein Tools serves several industries including construction, HVAC/R, plumbing, telecom, municipal, and industrial. Some of the tools Klein Tools produces include non-contact voltage tester bens, multi-bit screwdrivers, digital circuit breaker finders, advanced circuit tracer kits, and multi-bit electronics screwdrivers.
-
-
-
-
-
-
Accusize Industrial Tools
Laser Levels
Distributor Overview
Accusize Industrial Tools was born in Toronto, Canada in 2008. Accusize is a distributor of measuring tools, cutting tools, and machine tools for metalworking companies. A portion of offerings that Accusize offers includes collet blocks, expanding arbors, air tools, power tools, die maker tools, annular cutters, bore gages, boring bars, boring heads, BT40 tooling, CAT40 tooling, calibration, layout, & machine setting tools, calipers & attachments, carbide inserts, end mills, force gauges, and metrology and material testing equipment.
-
-
-
-
-
Admiral Steel LLC
Laser Levels
Distributor Overview
Admiral Steel LLC is a steel supplier founded in 1949 and based in Chicago, Illinois. The company stocks over 1,300 different products including high-carbon strip, spring, and alloy steels, as well as stainless and specialty blade steels. Aside from stocking various steel products, the company offers heat treating, packaging, and processing services including laser cutting, edging, gauge correction and slitting. Admiral Steel LLC products have applications in the knife making, aerospace, construction and automotive markets.
-
-
Laser Level Manufacturer Ranking
*Including some distributors, etc.Ranking as of November 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Ohio Power Tool |
11.6%
|
| 2 | Johnson Level & Tool Mfg. Co., Inc. |
9.6%
|
| 3 | Pinpoint Laser Systems |
8.7%
|
| 4 | FLUKE Corporation |
8.7%
|
| 5 | Kapro Industries Ltd. |
8.5%
|
| 6 | Beiter Technologies USA LLC |
7.6%
|
| 7 | EBIC Tools Co., Ltd. |
6.7%
|
| 8 | Stanley Black & Decker, Inc. |
6.1%
|
| 9 | DEWALT |
5.6%
|
| 10 | Metro Hydraulic |
4.5%
|
Derivation Method
The ranking is calculated based on the click share within the laser level page as of November 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- ABB: 105,000
Newly Established Company
- HUEPAR.: 2013 (11 years ago)
- EBIC Tools Co., Ltd.: 2003 (21 years ago)
- ABB: 1988 (36 years ago)
Company with a History
- Johnson Level & Tool Mfg. Co., Inc.: 1947 (77 years ago)
- Shinwa Rules Co., Ltd.: 1971 (53 years ago)
- Beiter Technologies USA LLC: 1982 (42 years ago)
Laser Level Manufacturers in United States
*Including some distributors, etc.
- Stanley Black & Decker, Inc.
- FLUKE Corporation
- Johnson Level & Tool Mfg. Co., Inc.
- Pinpoint Laser Systems
- Beiter Technologies USA LLC
- Ohio Power Tool
- Metro Hydraulic
- DEWALT
Global Distribution of Laser Level Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
United States of America
|
8 | 53.3% |
Switzerland
|
2 | 13.3% |
China
|
2 | 13.3% |
Japan
|
1 | 6.7% |
Israel
|
1 | 6.7% |
Canada
|
1 | 6.7% |
