All Categories
History
This section provides an overview for needle valves as well as their applications and principles. Also, please take a look at the list of 122 needle valve manufacturers and their company rankings. Here are the top-ranked needle valve companies as of December, 2024: 1.Hayward Flow Control, 2.Aalborg Instruments & Controls, Inc., 3.MicroStrain, a LORD Company.
Table of Contents
1985-2014: Worked for Alstom Corporation, ABB Corporation, and Gadelius Corporation, designing Jungstrom air preheaters and mechanical design of diamond soot blowers. (ABB Corporation: https://new.abb.com/jp)
2014-2021: Worked as an engineering and project manager at Alvos Inc.
https://www.linkedin.com/in/yoichi-hiroki-92192394/
A Needle Valve is a valve with a stem (valve stem) that has a thin, pointed tip.
Needle Valves are characterized by their ability to accurately adjust the flow rate, not to mention their role as a stop valve that fully opens and closes the flow path. In general, however, they are intended for relatively low flow rates.
Figure 1. Example of needle valve use
Needle Valves are often used in flow control valve applications that require precise flow adjustment because of their superiority in adjusting flow rates. Therefore, they are rarely used in the fully open state. Most of them are used by adjusting the valve opening degree and fixing it at the required flow rate.
In particular, they are often used for flow control in minute areas or when the range of flow control is narrow. Normal globe valves (and some ball valves) can also control flow, but it is difficult to make very precise and fine adjustments, and they are generally used for flow control that does not require precision.
Needle Valves, however, can provide precise and fine flow control due to their internal structure specifically designed for flow control. For example, they are used in the semiconductor industry to adjust the amount of nitrogen purge, control air flow for opening and closing air cylinder valves and diaphragm valves, and stop valves for pressure gauge fluids.
Figure 2. Structure of needle valve
The structure of a Needle Valve consists of a body (valve box), stem (valve stem), and handle.
The main feature of a Needle Valve is that, as the name suggests, the valve plug is needle-shaped. Globe valves, which have a similar structure, have a very large valve plug and are excellent for closing, but not for flow control.
In a needle valve, when the handle is turned to open the valve, the valve plug (needle) at the end of the stem rises and the opening between the valve seat and the flow path changes little by little. As a result, the flow rate changes little by little, allowing easy and accurate adjustment of the flow rate.
Figure 3. Needle valve opening/closing and fluid flow
Needle Valves can be used as stop valves for shut-off purposes. However, because it requires many turns of the valve stem to fully open and close, Needle Valves are not used for simple shut-off applications.
To completely and easily shut off the fluid, a stop valve, such as a globe valve or ball valve, is installed in the flow path to shut off the fluid.
Needle Valves are available in the following types:
Automatic Needle Valves are used when opening, closing, and flow adjustment is required by remote control. An electric actuator is used to rotate the plug and stem to open and close the valve.
Some types use a stepping motor as the drive motor to enable precise and fine control. Stepping motors are motors that can control the angle of rotation by pulse signals, and are one type of motor that can guarantee high positioning accuracy.
Brass is a material for general-purpose applications and is often used for low-pressure, non-high-pressure, low-flow applications such as air, cold and hot water, and oil.
Stainless steel is used, for example, in gas piping for silane and nitrogen trifluoride, which are commonly used in the semiconductor industry.
*Including some distributors, etc.
Sort by Features
Sort by Area
Ideal Valve Inc. is a designer and manufacturer of custom high-precision metering valves for various industries including aerospace & aviation and manufacturers of precision measurement instruments based in Grafton, North Dakota. The company offers various products including Stainless Steel Needle Valves designed for extremely precise flow control of gases and liquids with working pressure up to 5000 psi and Brass Needle Valves designed for pressures up to 3000 psi and for applications requiring metering of larger flows than those controlled by standard brass and stainless steel valves.
ControlAir, Inc. is a manufacturer and supplier of precision pneumatic and electro-pneumatic control solutions, established in 1987 and headquartered in Amherst, New Hampshire. It offers a diverse range of products tailored for industrial automation and control applications, and it includes pneumatic and electro-pneumatic transducers, precision regulators, pneumatic relays, and current-to-pressure converters. Their products find wide application in various industries, ensuring accurate control of pressure, flow, and other critical parameters. Its ISO-9001:2015 registered quality system assures tightly controlled specifications and processes, resulting in dependable pneumatic controls.
Brooks Instrument, established in 1946 and currently a subsidiary of Illinois Tool Works Inc. (ITW), is an American manufacturer with its global headquarters in Hatfield, Pennsylvania, specializing in flow and pressure measurement and control technology. The company’s offerings encompass various mass flow controllers and meters, tailored for heat treating, cutting, and other thermal processes for mass flow sensors. Additionally, the company delivers pressure and vacuum controller technology for original equipment manufacturers (OEMs). It develops vaporization technology, utilized in industrial and semiconductor processes, for water vaporization or humidification, along with variable area (VA) flow meters (rotameters) for liquid or gas flow measurement.
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
Bimba Ltd., first founded in 1957 and acquired by IMI plc in 2019, is a manufacturer of motion control components. The company's products include four main categories of actuators that include pneumatic, hydraulic, electric, vacuum, and other developing actuator technologies. In simple terms, the company's products are engineered devices that produce the force to make something move, including factory machinery and robots used for painting in automotive plants. The company also offers two types of customized services: one that includes the modification of its existing components and the other that includes full design, engineering, and production.
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
Trico Corporation, established in 1917 and headquartered in Pewaukee, Wisconsin, is a manufacturer of lubrication equipment, spray coolant systems, and electrical accessories. Its product line includes products for storage, handling, and grease lubrication. It also offers visual inspection tools, central lubrication systems, and metalworking products. Its comprehensive selection addresses various maintenance and challenges, ensuring optimized machinery performance. The company also provides other lubrication management solutions, offering diverse services like training and mentoring, in-plant services, and lube management.
Valve Check Inc., established in 2004 and based in Minnesota, US, is a manufacturer and designer of check and pressure relief valves. The company’s products include plastic cartridge valves, microneedle valves, custom manifolds, plastic check valves, and ball valves among others. The check valves come in a wide range of sizes, cracking pressures, and seal options. It serves a wide range of industries such as aerospace, medical, dental, chemical processing, fire protection, and many more.
Ultra Clean Holdings Inc., founded in 1991 with headquarters in the San Francisco Bay Area, USA, is a manufacturer of chemical and gas delivery components and systems. The company's product line includes valves, fittings, weldments, and heaters. Its systems include modular plastic chemical delivery system modules and subsystems, as well as complete turnkey PFA-grade gas delivery systems used in the manufacture of semiconductors. The company serves many industries, including semiconductor production, semiconductor equipment manufacturing, energy, pharma, and display manufacturing.
Air Logic’s parent company was started in 1935. In 1975, the parent company purchased Johnson Controls’ Fluidic Division and renamed it Air Logic, operating out of Milwaukee, Wisconsin. The company is an ISO 9001:2015 certified manufacturer of standard and custom molded components and fittings to customers in the United States and overseas. The company’s primary product categories include orifices, filters, check valves, switches, and regulators. The company also offers custom manufacturing through options of orifice and fitting sizing, as well as custom molding and material varieties.
Nordson Corporation, established in 1954 and headquartered in Westlake, Ohio, USA, is a global manufacturer and marketer of differentiated products for precision dispensing and processing. They cater to diverse end markets, including packaging, electronics, medical, energy, and transportation. With over 6,800 employees across more than 35 countries, Nordson offers solutions for bonding, adhesive dispensing, fluid management, test and inspection, and UV curing. Their product line includes dispense tips, syringe barrels, dispensers, srapy valves, fluids, and syringe systems among others. Comprised of eight divisions, they are ISO 9001:2015 certified and provide systems, precision technology, and after market parts.
Danfoss was founded in 1933 in Nordborg, Denmark where it remains today. The company serves automotive, food & beverage, energy & natural resources, wastewater, and mobile hydraulics industries as a manufacturer of power systems and industrial hydraulics. The company operates through three business segments: Danfoss Power Solutions, Danfoss Climate Solutions, and Danfoss Drives. Danfoss Power Solutions produces electronic controls, hydraulic power units, and cylinders. Climate Solutions produces heat exchangers, burner components, hydraulic heating, and sight glasses. Drives produce gear motors, low and medium voltage drives, and various software solutions for operating drives.
RegO, based in North Carolina, USA, has been a manufacturer of valves and regulators since 1908. The company offers diverse products, primarily for gas and liquid control systems. These products are essential for maintaining consistent pressure in gas systems, ensuring safety and security. Its product line includes valves, regulators, fittings and connectors, pressure relief devices, and accessories to complement its product lines, enhancing system performance. The company's products are engineered for precision and durability, which customers rely on. The company has also attained ISO certifications for quality management systems.
High Pressure Equipment Company, part of Graco Inc., established in 1954 in the United States, is a manufacturer of high pressure valves, fittings and tubing. The company manufactures high pressure valves, fittings and tubing with superior standards, delivered with the shortest lead times, and priced to ensure its customers' success. Today, it features a broad product portfolio capable of handling pressures up to 150,000 psi and carries an extensive inventory allowing it to offer same day shipping of many items. It also offers a complete line of reactors and pressure vessels and a recently expanded family of pumping systems and generators.
Swagelok Company is a manufacturer of fluid system components and assemblies. The company, which operates in more than 100 countries, was founded in 1947 and is headquartered in Solon, Ohio. Its main activity is the design, development, and manufacturing of fluid system components, including fittings, valves, and hoses. The company also offers a wide range of assemblies, such as manifolds and control valves. Swagelok's products are used by a wide range of customers, including industrial, commercial, and laboratory applications.
Hy-Lok USA, Inc., established in 1977 and headquartered in Stafford, Texas, USA, is a manufacturer and supplier of fluid and gas control solutions. The company’s main products encompass a comprehensive range of quality instrumentation valves, fittings, and connectors used in critical applications across industries such as oil and gas, petrochemical, and semiconductor manufacturing. For their engineering excellence, Hy-Lok USA plays a pivotal role in ensuring dependable and particular fluid handling, contributing to operational efficiency and safety. As a manufacturer and supplier, they are loyal to delivering advanced solutions that meet the intricate requirements of modern industrial processes.
Admiral Valve, LLC, dba CPV Manufacturing, founded in 1915 with headquarters in the USA, is a manufacturer of industrial valves and related equipment and accessories. The company's products include master valves, control valves, relief valves, o-ring face seals, and direct weld adapters. CPV Manufacturing's products are used in industries including construction, chemical processing, oil and gas, and infrastructure engineering and can be found in chemical processing plants, high-pressure water distribution systems, and on oil rigs. The company also provides customized solutions, including design, engineering, and production, for client-specific requirements.
The company NOSHOK was founded in the year 1967 and they are located in the United States of America in the state of Ohio in the city of Berea. NOSHOK provides many different products such as pressure gauges, transmitters, transducers, pressure switches, level transmitters, temperature devices, valves, diaphram seals, digital indicators, KING filters, and additional accessories. Many of these products have been introduced by the company over time and they continue to introduce many new products.
Valtorc International, founded in 1980 and headquartered in Kennesaw, Georgia, is a supplier of ARRA-compliant valves, actuators, and accompanying accessories to the industrial control and actuated valves markets. In 2012, the company announced that it would provide V-ball control valves to United Technologies. In 2013, it added fusible link valve packages, namely the Series FS10 and Series FS20, designed for automatic shutoff in case of a fire to prevent liquid damage. In 2016, it was selected for the United States Excellence Award, and in 2018, it was among the 2018 GLOBE Award Winners.
Beswick Engineering was founded in 1964 as an engineering consulting firm. Beswick now operates out of Greenland, New Hampshire. Berwick serves the medical devices, aerospace, analytical instruments, bomb, gas, & narcotic detection equipment, semiconductor, dental, hydrogen fuel cell, industrial robot & automation, inkjet, 3D printing, and packaging & food packaging machinery industries. Beswick offers tubing, tubing clamps, cylinders, compression fitting accessories, filters, mufflers, breathers, orifice restrictors such as drilled orifice fittings and sapphire orifice fittings, valves, regulators, and quick disconnects. Beswick also offers custom design options.
Dymax Corporation was founded in 1980 and is headquartered in Torrington, Connecticut. The company develops and manufactures rapid and light-curable materials and light-curing systems for the medical, consumer electronics, wearables, aerospace, and automotive electronics industries. The company’s product segments include Light Curable Materials, Light-Curing Equipment, and Dispensing Equipment. Light Curable Materials include masking, gasketing, and activators. Light-Curing Equipment includes conveyor systems, flood-curing systems, and radiometers. Dispensing Equipment includes dispense valves, syringe dispensers, and material reservoirs. The company also offers application engineering, equipment, and system integration services.
Ashcroft was founded in 1852 in Bridgeport, Connecticut to create instruments to protect steam-powered industry workers and today is a manufacturer in pressure and temperature measurement instrumentation.Ashcroft serves the chemical, food & beverage, metals & minerals, oil & gas, pharmaceutical & research, power, and water & wastewater markets. Ashcroft products include pressure instruments including pressure gauges, switches, sensors, and isolators; test instruments including calibrators, controllers, testers, and test gauges; and temperature instruments including thermometers, thermowells, RTDs, thermocouples, multipoint temperature sensors, and OEM temperature sensors.
Precision Valve & Automation, established in 1992 and headquartered in New York, US, is a supplier that provides fluid dispensing and selective conformal coating solutions to global manufacturers. The company offers a range of products, including 3D printing, bonding, dam and fill, thermal interface materials, and more. It also manufactures UV curing spot, flood, and conveyor light curing systems. Its products are biodegradable and water-soluble, making it a sustainable alternative to traditional plastics. Moreover, the company has achieved ISO 9001 certification. Its products are used in various industries, including oil and gas, construction, textiles, adhesives, and more.
Asahi/America was born in 1971 to be the distributor for Asahi Yukizai Corporation products on the East Coast of the United States. Asahi/America serves the aquarium & entertainment, chemical processing, data center, metal finishing, and the water/wastewater industries. The company offers a selection of valves and actuators including many types of valves, high purity piping, air & gas handling, double containment, and welding equipment. The company alos offers a wide assortment of custom fabrication of parts and components.
Techcon is based in California, USA, and is a manufacturer and supplier of fluid and adhesive dispensing products that was established in 1961 as a brand of OK International, Inc., a subsidiary of the Dover Corporation. The company primarily produces fluid dispensing products such as consumables or software for smart dispensers. It also offers components for dispensing systems such as dispensing robots, smart dispenser controllers, and syringe barrels. The company’s products are used mainly by clients in the electronics industry, and in the industrial automation and industrial manufacturing sectors.
Precision High Pressure, established in 2015 and based in Nampa, Idaho, USA, is a manufacturer and supplier of accessory capables. The company's product range includes adapters and couplings, adjustable relief valves, air-operated needle valves, ball valves, and block and bleed valves. These products find applications in areas such as subsea and surface operations, hydrogen fuel cells, chemical injection systems, and process control systems. Serving industries like oil and gas, waterjet markets, hydrogen, and waterjet cutting, the company offers services such as high pressure valve solutions, custom fitting provisions, and tubing techniques.
Aalborg Instruments & Controls, Inc., established in 1972 in Orangeburg, New York, USA, is a manufacturer and supplier of precision instrumentation for flow measurement and control. The company's product range includes Mass Flow Controllers, Variable Area Flow Meters, Paddle Wheel Flowmeters, Flow Control Valves, and Peristaltic Pumps, catering to industries requiring accurate flow measurements and controls such as research, industrial processes, and manufacturing. Its services include product manufacturing, flow calibration, and technical assistance. With a long period of experience, the company consistently exceeds expectations in precision and service.
The Specialty Mfg. Co., founded in 1902, is a manufacturer and distributor of valves, hydraulic couplers, pool/spa science automation, dental components, and custom machine tool fixtures from brass, plastic, and stainless materials. The products are strainers & filters, pressure controls, and valves such as check, ball, dental, cartridge, and custom valves for chemical dispensing, food & beverage, agriculture, transportation, and power generation industries. The company in St. Paul, MN, offers integrated services such as precision machining, metal stamping, grinding, plastic injection molding, and wire EDM. The company has an ABS Quality EValuation conformance certification.
Pro Dyne Corporation (Pro Dyne) was established in 1985 as a manufacturers' representative agency covering the states of Pennsylvania, New Jersey, Delaware and Maryland. Pro Dyne is headquartered in Phoenixville, Pennsylvania. Pro Dyne is now a regional distribution company and handles fluid handling products both in the United States and abroad. Six primary product lines Pro Dyne represents are Scot Pump, Young Touchstone, Weg Motors, Delavan Nozzles, Rub Ball Valves, and Pro Dyne SS Pumps.
Doering Company was founded in 1969 and operates out of Clear Lake, Minnesota. Doering is a distributor for pump-related products for markets such as marine, mining, industrial, energy, aerospace, forestry, and agriculture. Doering’s product lines include cartridge valves, hydraulic hand pumps, manifolds, mobile and agricultural valves, and hydraulic valves. Cartridge valves include directional control, flow control, pressure control, and load holding. Hydraulic hand pumps include dual-stage hand pumps and single-stage hand pumps. Manifolds and accessories include custom designs based on customer needs. Mobile and agricultural valves include directional-control and lock valves.
Kinnear Specialties, Inc. is a family-owned business founded in 1969 and based in Saint Helens, Oregon. Kinear Specialties is a manufacturer of custom hydraulic systems and a distributor of additional hydraulic machines, parts, and accessories. Kinnear Specialties has a broad line of products including hydraulic and pneumatic cylinders, pumps, hydraulic accessories, and accumulators. Complete custom filtering and hydraulic systems are available. Kinnear Specialties, Inc. also provides, design, installation, and repair services for hydraulic parts and systems.
Industrial Specialties Manufacturing (ISM) was founded in 1982 in Denver Colorado. is an ISO 9001 company that supplies miniature pneumatic, vacuum, and fluid circuitry components to OEMs and distributors all over the world as well as providing custom solutions. The company serves distributors and offers not just sales but also marketing and logistics support with closed-loop feedback. Some of the types of products ISM offers include plastic fittings, customized fittings, sub-assemblies, and custom heat seal tooling.
Valves & Fittings of Houston, Inc., founded in 1976 and established in the United States, is a supplier specializing in a diverse range of valves, fittings, and related equipment. Catering to industries like oil and gas, petrochemicals, and manufacturing, the company offers essential components such as ball valves, gate valves, and pipe fittings. With an aim on adhering to industry standards, the company offer services that ensure smooth operations for critical sectors, making them a partner in fluid management solutions.
ARCO Engineering was founded in Louisville, Kentucky in 1954. ARCO Engineering, Inc. is a distributor of Pressure, Temperature and Liquid Level instruments, instrument valves, heat trace, comfort heaters, and safety relief valves. ARCO Engineering specializes in products for the natural gas, process, chemical, power, wastewater and OEM markets. ARCO Engineering offers many types of parts including calibration instruments, hand valves, thermocouples, digital meters, drive pressure gauges, respirators, jet pumps, and pressure relief valves.
HORIBA RADIO LABORATORY was established in Japan in 1945 and has spent the last three-quarters of a century growing as an R&D company and engaged in international operations. HORIBA Scientific offers 200 years of experience developing high-performance scientific instruments and analytical solutions. The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing, and metrology to a broad range of scientific R&D and QC measurements. Operating in Asia, Europe, and North and South America, HORIBA scientific develops solutions that go beyond just products.
Lenz Laborglas GmbH & Co. KG is a manufacturer of glass laboratory instruments that was established in Wertheim, Germany in 1846. The company primarily produces CINCIN brand reusable glass drinking straws, as well as specialized glass apparatuses for inert gas welding, biotechnology, or radiation protection. It also offers stopcocks, flasks, chromatography components, and ground joints. Aside from its products, the company provides user training, analytical consulting, and repair services to its clients.
Taicin established in Taiwan, in 1963 is a manufacturer engaged in hydraulic valves and pumps used in industries such as cosntruction, oil and gas and mining. The company manufactures all of its products from raw material to finished goods in their own factories and their product range includes Oil Hydraulic Pump, Directional Control Valves, Cartridge Valves, Electro-Hydraulic Proportional Valves and Oil Hydraulic Accessories. Their products have SO 9001-2015 standards and certification. The company has a R&D center and it provides worldwide customer service and technical support.
Pisco, established on October 18, 1976, in Okaya City, Nagano, Japan, is a manufacturer and supplier of pneumatic equipment. The company's product portfolio includes a wide range of vacuum-related solutions, including vacuum pumps, vacuum gauges, vacuum valves, vacuum accessories, and vacuum automation solutions. These products cater to a diverse array of industries, including semiconductors, electronics, pharmaceuticals, food and beverage. The company also offers a suite of services, ranging from design and engineering to supply chain management and technical support. The company holds ISO 9001:2015 accreditation as evidence of its devotion to delivering quality products and services.
DAV Tech Srl is a manufacturer of fluid dispensing systems and components that was established in 2004 in Montecchio Maggiore, Veneto, Italy. The company primarily offers stepper motor, electric, and pneumatic dispenser models with various functionalities including progressive cavity and time pressure features. It also offers controllers, valves, and related accessories for dispensing a range of fluids from oils to pastes. The company’s products are commonly used by client manufacturers of pharmaceuticals, cosmetics, and home maintenance supplies.
Aplisens S.A., founded in 1992, and headquartered in Warsaw, Mazowieckie, Poland, is a manufacturer of process instrumentation. The company offers a diverse range of control and measurement products, including differential pressure transmitters, hydrostatic level probes, level transmitters, valves, and digital indicators. It also offers power supplies, separators, and gauges. It is certified with ISO 9001:2015 and HART, and also provides Quality Assurance Notifications for ATEX compliance, ensuring product safety in potentially explosive environments.
Deenpu Machinery Equipment Co., Ltd. is a manufacturer of oil and gas drilling equipment, headquartered in Yancheng City, Jiangsu Province, China. The company's product offerings include plug valves, pup joints, hydraulic power units, as well as remote control panels, and hammer unions. These products meet or exceed API 6A, 16A, 16C, 16D, and 20E specifications. Its manufacturing facility spans over 20 acres, with manufacturing buildings covering 600,000 square feet, housing state-of-the-art processes.
M&C TechGroup Germany GmbH, established in 1985 and headquartered in Ratingen, Germany, is a manufacturer of gas sampling, gas conditioning, and process control solutions. The company offers a wide range of products such as gas sample probes, heated lines, pumps, coolers, and more. It also provides filters, analyzers, temperature controllers, and gas conditioning systems. Its gas sample probe SP10 can withstand temperatures of up to 180 °C [356 °F]. The company serves several industries such as glass industry, chemical industry, environmental technology, power plants, and more.
Meister Strömungstechnik GmbH, headquartered in Wiesen, Germany, is an international manufacturer and distributor of industrial flow and control components and equipment, established in 1984. The company's main products include devices for measuring and monitoring water, oil, and gaseous media across various applications, including rugged flow meters, flow limiters, and mechanical and electrical accessories for Industry 4.0 integration. These products are used in energy technology, environmental technology, and the mechanical engineering industry. The company offers services such as custom production, equipment testing, and on-site workshop-level consultations within Germany.
PCI Instruments is a manufacturer of process instrumentation and diaphragm seals that is headquartered in Southport, England and was established in 2000. The company has a product catalog that includes pressure gauges, temperature gauges, diaphragm, seals, pressure transmitters, and resistance thermometers. Pharmaceutical, food processing, dairy, chemical, petrochemical, and nuclear industries are the main consumers of the products manufactured by the company. Its pressure gauges offer hygienic gauges for all stainless steel industrial applications along with he product catalog based on pressure, temperature, and level.
Vögtlin Instruments GmbH, established in 1986 and based in Muttenz, Switzerland, is a manufacturer of precision gas flow instruments. The company produces products such as mass flow meters of different models and precision control valves used in different applications such as gas analysis, laboratory equipment, life sciences, research & development, test equipment, and OEM applications. All the gas mass flow meters and mass flow controllers manufactured by the company will give analog and digital output while offering IP67/NEMA6 and ATEX protection. The company has technology centers in different countries, such as the USA, Switzerland, Germany, and Great Britain.
Pister Kugelhahne GmbH, founded in 1961 and headquartered in Muggensturm, Germany, is a manufacturer of metal valves and fluid technology. The company's products include high-pressure shut-off ball valves, stainless steel ball valves, and flanged ball valves. These products are used in hydraulic breaking systems for windpower stations and to meet the pressure requirements of shipbuilding and firefighting equipment. It also offers multicoupling systems primarily designed for agriculture equipment and earth-moving machinery that used high-pressure hydraulics.
Gemels spa is an Italian manufacturer of hydraulic ball valves and related products that was established in 1969 in Trescore Balneario, Bergamo. The company primarily produces hydraulic ball valves for controlling fluids in hydraulic systems, electric motors for powering pumps or conveyors, and quick couplings for connecting or disconnecting hoses or pipes. It also offers technical support and after-sales services including repair and replacement. The company’s products are mainly used by clients in the marine, chemical processing, and oil and gas industries.
Golden Mountain Enterprise Co., Ltd. (GMEC) is a Taiwanese manufacturer of industrial products and instruments founded in 1980. The company produces various valve, pressure, flow, and temperature system components for use in chemical processing, food processing, pollution control and oil refining. GMEC is an ISO9001 certified company, with an extensive product portfolio including Venturi tubes, butterfly valves, manometers and temperature controllers. These supply industrial processes in sites like breweries, chemical plants and wastewater treatment facilities.
BELGICAST, established in 1957 and headquartered in Mungia, Spain, is a manufacturer specializing in pipeline and fluid control components. Its diverse range of products includes gate valves for fluid control, check valves to prevent reverse flow, and butterfly valves for flow regulation. Additionally, the company offers universal couplings for connecting diverse pipes and flanged adaptors and saddles for pipe connections. The company's product quality are highly regarded in the industry.
Bola-Tek Mfg. Co., Ltd., headquartered in Taichung, Taiwan, and founded in 1966, is a manufacturer of valve balls and stems. The company has expanded its product range to encompass several valve types, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its stainless steel and carbon steel products adhere to industry standards like ASTM, EN, JIS, and ANSI. It provides the API 607 fire-safe approved BT-V3WMH series, engineered for fire-safe performance. Additionally, it offers a 2-piece ball valve tailored for high-pressure applications, featuring a 6000psi rating.
Samoa Industrial, S.A., established in 1958 and headquartered in Asturias, Spain, manufacturer that develops products for fluid handling and management during the maintenance of vehicles, infrastructures, and industrial machinery. The company's product line includes pneumatic piston pumps, manually operated pumps, battery grease guns, used fluid equipment, meters, and more. It also offers kits and packages that include electric pumps, outlet and suction hoses, delivery guns, and suction accessories. Its lever-action grease pumps have a cast iron head for maximum durability. It serves industries such as automotive, construction, agriculture, mining, and more.
SBU- Sociedade Brasileira de Usinagens, founded in 1975 and based in Brazil, is a manufacturer of machining products and brass fittings. The company provides services to the automotive industry and systems, concentrating on the aftermarket and maintenance sectors. Its product range, SBU Metal Bras, includes hose coils, compression fittings, and valve solutions. With its ferrous and non-ferrous materials, it caters to the markets with a complete line of brass fittings. The company's equipment includes CNC, TRANSFER, and multispindle machines, complemented by metrology equipment and tools like FMEA, APQP, and FIPAQ software.
Budenberg Gauge Co. Ltd., a British manufacturer of instrumentation based in Altrincham, Cheshire, Greater Manchester, was founded in 1850 as Schaffer & Budenberg before its acquisition by the Budenberg family in 1914. The company's product portfolio includes pressure gauges, temperature gauges, as well as gauge accessories and ancillaries. It also supplies various types of valves and calibration kits. The company further offers Budenberg Technical Services (BTS), covering repair, recalibration, and certification, training courses, as well as on-site and bespoke services. The company serves various industries, including the chemical, food and beverage, oil and gas, petrochemical, as well as water and wastewater sectors.
Dansk Ventil Center A/S, established in 1999 and headquartered in Vejle, Denmark, is a manufacturer that specializes in valves and accessories. The company offers a wide range of products and services related to valves and accessories, including ball valves, butterfly valves, safety valves, steam traps, and strainers. It also offers in-house engineering and assembly services. Its ball valves are cheaper than other types of valves, which makes them a cost-effective option for installation. It serves a wide range of industries such as oil and gas, pharmaceutical, waste water, FnB, and more.
ARMATUREN-ARNDT GMBH is an ISO 9001 certified German manufacturer of industrial valves and fittings that was established in 1956 in Troisdorf, North Rhine-Westphalia. The company produces various fittings and valve models including valves with fluid indicator attachments, bulkhead couplings, and manometer gauge valves. It also offers banjo couplings, high-pressure shut-off valves, and hose fittings with an interlock for hydraulic hoses. The company’s products are mainly used by clients in the oil and gas, water treatment, power/energy generation, and biotechnology sectors.
KTN, or Kara Technology News, founded in 2003 and based in Madrid, Spain, is a manufacturer of valves and instrumentation. Its product range includes various valve types like ball, butterfly, gate, globe, and control valves, each designed to meet diverse requirements for temperature and pressure resistance. It also offers a wide array of instrumentation devices for temperature and pressure measurement, along with automation products including limit switch boxes, and pneumatic actuators. The company complements its offerings with accessories like filters, compensators, sight glasses, and safety guards for a complete solution in the field of fluid control and measurement.
Intertubi SPA, established in 1986 and headquartered in Brescia, Italy, is a manufacturer that specializes in the production and distribution of fittings, valves, and flanges. The company offers various products, including butt welding fittings, forged flanges, valves, and more. It also offers threaded fittings and hydroformed tees. Its threaded fittings offer easy installation and disassembly for connecting pipes. The company has achieved UNI EN ISO 9001 and UNI EN ISO 14001 certifications. It serves various industries such as the oil and gas, petrochemical, and energy sectors.
Yantai Jereh Petroleum Equipment & Technologies Co. Ltd. is a Chinese manufacturer of oil field equipment that was established in Yantai, Shandong in 2004 as a subsidiary of Jereh Group. The company produces a wide range of well completion, drilling, and stimulation equipment. These include off-shore as well as land rigs, and flowline products such as choke or kill manifolds and nitrogen generators. It also offers cementing trucks and pumps for mobile operations and demanding environments. The company maintains locations in over 50 countries including in the North America, Russia, and Africa.
TPS-Technitube Röhrenwerke GmbH, established in 1973 and headquartered in Daun, Germany, is a manufacturer and stockist that specializes in steel and tube products. The company offers a wide range of products, including seamless tubes, flanges, fittings, valves, and heat exchanger tube stock. It also provides oilfield tubing such as tubing, casing, and drill pipe. Its products offer surface finish quality with no weld seam, ensuring high-pressure resistance and a smooth flow of fluids. The company has achieved ISO 9001:2015 and IATF 16949:2016 certification. It serves industries such as oil and gas, chemical, automotive, semiconductor, and more.
Jianhu Jielin Petrochemical Machinery Co. Ltd. is based in Yancheng City, Jiangsu Province, and is a Chinese manufacturer of oil field machinery and spare parts established in 2012. The company specializes in bops, choke and kill manifolds, and wellheads. Its lineup includes plug valves, blowout preventers, and bop control units. It also offers industrial grade desanders and hydraulic gate valves. The company's products are made in accordance with ISO 9001 standards, as well as API-6A, API-16A, and API-16C equipment standards.
RedFluid, established in 1985 and headquartered in Barcelona, Spain, is a manufacturer that specializes in manufacturing and stocks valves and fittings. The company specializes in needle, check, ball valves, customizing dimensions, connections, and more. It also offers needle-regulating valves suitable for instrumentation circuits. Its needle valves are resistant to both hot and cold temperatures. Furthermore, the company is ISO 9001:2015 certified. It serves various industries, including medical, aerospace, and alternative fuels.
DI NICOLA, established in 1928 and based in San Giovanni Teatino, Abruzzo, Italy, is a manufacturer of valves and electromechanical equipment. The company produces other products related to drinking water treatment plants, irrigation, wastewater treatment plants, dams, hydroelectric plants, and industrial installations. Some of the produced by DI NICOLA include flange adapters, disassembly joints, steel clapet valves, and vent valves. The company is supplying the products for industrial and hydraulic use. Every product produced meets the quality standards.
Bueno Technology Co., Ltd. is a manufacturer and supplier established in 1969, specializing in providing flow control products, and is headquartered in Tainan City, Taiwan. Their product range encompasses water and oil-free valves, fittings, and components for industries such as pharmaceutical, semiconductor, optoelectronic, electrochemical, and petrochemical. These products ensure the safety and stability of the manufacturing process. Bueno Technology Co., Ltd. has factories located in Taiwan, China, and Vietnam. The company has achieved several international standards, including ISO 9001-2000, ISO 14001, and AD200W, for its quality and environmental management systems.
Metalúrgica Zaes S.L., founded in 1962, is an industrial valve and fitting manufacturer based in Cornella de Llobregat (Barcelona), Spain. Certified with ISO 9001:2015, the company offers a range of industrial valves, including float, needle, and safety valves. It also provides accessories for industrial instrumentation, such as pressure gauge dampers and valves, along with siphon tubes, designed for control, dissipation, and measurement in gaseous, liquid, and vapor systems. The company's fitting offerings include hose, push-in, and threaded fittings. These products find applications in various sectors, including gases and cryogenics, street cleaning, and water and waste management.
MPB Industries Ltd, a part of the SDI Group, established in 1986 and headquartered in Kent, UK, is a manufacturer of flowmeters and process control instrumentation. The company offers flow alarms, flow transmitters, and level switches. It produces calibration cylinders, sight glasses, and specialist medical gas flowmeters. Its products are used in gas and oil production, human medical anesthesia, and water treatment industries. Its medical gas flowmeters are used in medical and veterinary settings, ensuring accurate gas flow measurement. The company also provides design, assembly, and calibration contract services, as well as artwork and laser engraving of logos or QR codes.
Wilhelmsen, established in 1861, is a global maritime industry manufacturer and supplier that specializes in marine products and services headquarted in Norway. Its broad portfolio encompasses shipping, logistics, and maritime engineering services, which caters to the global maritime sector. Its products and services supply to a diverse clientele, including shipping companies, logistics providers, and maritime enterprises, among others, offering solutions that drive efficiency and sustainability in the industry. The company seeks to develop new opportunities and collaborations in renewables, zero-emission shipping, and marine digitalization.
TOGNELLA S.P.A. is a manufacturer of industrial valves and fittings founded in 1957 in Somma Lombardo, Varese, Italy. The company produces a wide range of flow control products including cartridge flow control valves, pressure compensated double-acting flow control valves, and double-acting stackable control valves with adjustable handwheels. It also offers adjustable pressure switches and additional services, including product customization, analysis, and personnel training. The company’s products are primarily used by clients in the oil and gas, machine tool, and hydraulics industries.
KOFLOC Corporation, established in 1949, is a manufacturer and retailer of standard and off-catalog custom gas generators, precision flow instruments, and engineering devices headquartered in Osaka, Japan. The company manufactures various flow instruments for measuring and controlling fluids, including flow meters, pressure regulating valves, flow control valves, and mass flow controllers and meters. The company’s gas generators are used to generate various gases from the air and water, including nitrogen gas, hydrogen gas, oxygen gas, ozone gas, and clean dry air. KOFLOC is ISO14001: 2006-certified company whose equipment are used in aerospace, water treatment plants, power generation, and refineries.
Takasago Electric Industry, founded in 1959 and headquartered in Nagoya, Japan, is a manufacturer and supplier specializing in miniature chemically inert valves and pumps. The company's product portfolio includes solenoid valves, small syringe pumps, diaphragm pumps, fluid systems, and manifolds. These products are used in various industries, including aerospace, medical, cell culture, analysis, and other scientific and research fields. The company also offers services, including product catalogs, customization, integration services, and technical support. The company has a global sales network with distributors in the United States, China, India, Austria, and the United Kingdom.
Nihon Pisco Co. Ltd., founded in 1976 and based in Nagano, Japan, is a manufacturer and distributor of pneumatic equipment and is ISO 9001 and ISO 14001 certified. The company stocks various products like valves, actuators, and vacuum accessories used in several industries, including semiconductor, medicine, and rechargeable battery. The company started selling push-in fitting for pneumatic piping in 1977 and launched the industry’s first push-in fitting built-in type speed controller in 1981. In 1993, it launched a few products, including a quick exhaust valve, a digital pressure sensor, and a vacuum generator with a digital pressure sensor.
Fujikin was founded in 1930 and headquartered in Itachibori Nishi-ku, Osaka, Japan is a manufacturer of specialized valve equipment. The company offers a wide variety of valves including Ultra-precision valves for semiconductor manufacturing, Cryogenic ultra-precision valves for space exploration, Aseptic process valves for pharmaceutical and food manufacturing, valves for new energy and rechargeable batteries, and valves for nuclear power plant instrumentation. Additionally, the company has diversified its portfolio to include the development of cutting-edge medical equipment. This expansion includes the creation of ultrasonic diagnostic equipment, universal X-ray photography devices, telemedicine systems, and healthcare monitoring devices.
SMC corporation was founded in 1959 and is headquartered in Tokyo, Japan. SMC Corporation manufactures and sells automatic control equipment and filtration equipment. SMC has production facilities in 30 countries, technical development centers in Japan, the United States, Europe, and China, and sales offices, globally. SMC product lines divided by them include filter replacements, condensation prevention, heat resistance, thermos-chilling, and others. SMC provides a video library as well as product selection guide to assist customers in finding solutions and optimizing product efficiency.
Excel Metal & Engg. Industries founded in India, in 1990 is a manufacturer and supplier of steel products. The company's product portfolio includes Buttweld Fittings, Flanges, Socket Weld Forged Fittings, Threaded Forged Fittings and Tube Fittings. Their products are used for changing the direction of flow and reducing the pipe size and fitting of piping systems. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. The company provides services such as Product Selection Guidance, Engineering Support, and Custom Manufacturing
Oshwin Overseas, established in 1999, is a manufacturer and supplier based in Mumbai, India, specializing in high nickel alloy and stainless steel products. The company produces stainless steel seamless pipes and tubes that increase durability due to the absence of weak points, reduce the risk of corrosion, and allow more efficient flows due to smoother internal surfaces. Other products include instrument fittings, instrumentation valves, buttweld fittings, and flanges. These products are utilized in diverse industries such as medical, structural engineering, oil and gas, marine, and aerospace. Oshwin Overseas holds ISO 45001:2018 and ISO 14001:2015 certifications.
Kevin Steel, a subsidiary of Modentic Group, founded in 1993 and based in Taichung, Taiwan, is a manufacturer of valves that serve the water treatment industry. The company’s products include super alloy valves, industrial ball valves, sanitary valves, safety valves, needle valves, and butterfly valves among others. The applications of these valves include seawater desalination by reverse osmosis, brackish water treatment, water filtration, wastewater treatment, and more. The company is certified with 3A 68-00 and its products meet both FDA and 3A requirements.
Saint-Gobain Life Sciences, headquartered in Solon, Ohio, is a manufacturer of polymer solutions and components that support the electronics, medical, and biopharma industries, among others. Its bioprocess solutions division provides material science-based solutions like silicone tubing and filtration products for single-use fluid management. The medical business manufactures custom medical components like cartridges and capsule filters and designs systems for medical devices. The consumer solutions business provides customer support to achieve performance, safety, and regulatory compliance, and it provides customized solutions like flowmeters, seals, and tubing. The electronics division manufactures products like valves and fittings for fluid handling applications.
Proportion-Air, Inc., established in 1985, is a US manufacturer of electronic air pressure regulators and air flow control valves located in McCordsville, Indiana. The company produces various regulators, including flow controllers, pressure transducers, volume boosters, and safety regulators, that accept analog and digital signals. Additionally, they supply auxiliary accessories for their products. The company services several markets, such as industrial manufacturing, transportation, aerospace, pharmaceutical, and food processing. Product uses include water jet cutters, aircraft fuselage testing, and medical testing.
Detroit Torch & Mfg. Co. is a manufacturer of cutting torch and welding systems established in 2014 and based in Rochester Hills, Michigan, USA. The company specializes in torches, components, and related accessories used for cutting or welding various metals. Its product line includes complete torch kits, gas flow regulators, and DHC2000 torches for cutting or welding operations. The company also offers additional repair and warranty services for its torches and torch parts. Its products are mainly used in jewelry making, automotive repair or restoration, and metal fabrication processes.
Changzhou Mingseal Robot Technology Co. Ltd. is a manufacturer of semiconductor production machinery and equipment established in 2008 in Changzhou, Jiangsu, China. The company’s products include underfill dispensing machines for enhancing the mechanical strength or thermal cycling performance of semiconductor packages, and wafer-level dispensing systems for precision in wafer processing. It also offers soldering systems designed for accuracy and precision in the electronic assembly process. The company’s products are used in the semiconductor, consumer electronics, and communications industries.
Erhard GmbH & Co. KG, established in 1871 and located in Baden-Württemberg, Germany, is a manufacturer that specializes in water flow control solutions. The company offers a range of products and services, including needle valves, inspection, and penstocks. It also provides butterfly valves, check valves, gate valves, and diaphragm valves. Its products control the opening and closing process of a fluid automatically, so the users don’t have to worry about closing or opening the valves manually. The company has achieved ISO 9001:2015 certification for its quality management systems. Furthermore, it serves the water supply industry.
TECOFI, founded in 1985 and based in Corbas, France, is a manufacturer of industrial valves and fittings. Its product range includes butterfly valves for fluid control, knife gate valves for handling thick fluids, resilient seat gate valves used in flow regulation, ball valves for precise control applications, and check valves to prevent backflow. Its products are used in industries such as water and wastewater treatment, power generation, oil and gas, and chemicals. The company is known for its expertise in valve design and production.
HANSA-FLEX, been in business since 1962 and headquartered in Bremen, Germany, is a manufacturer of various types of hydraulic products and services. The company produces hoses, hose fittings, couplings, pipe fittings, and ball valves. It also fabricates hydraulic components, flanges, adapters, and pipes. The variants of its hoses, braided hoses, are oil, high-temperature, ozone, and weather-resistant. It has more than 80,000 parts relating to all aspects of hydraulics. It could also configure the customers’ hose lines based on their required specifications.
END-Armaturen GmbH & Co. KG is a German manufacturer of industrial valves that was established in 1980 in Bad Oeynhausen, North Rhine-Westphalia. The company primarily produces butterfly, knife-gate, ball, and solenoid valves. It also offers actuators, pressure reducers, strainers, flanges, and fittings, among other related accessories. These are commonly used in the biotech, water treatment, chemical processing, and oil and gas industries. Aside from its products, the company provides custom design and engineering services for unique customer projects.
AMOT, established in 1948 and based in Houston, Texas, United States, is a manufacturer of energy control valves, safety, and monitoring products. The company manufactures products such as temperature control valves, air and gas control valves, diesel engine safety products, and control products for engines, compressors, turbines, and rotating equipment. These products serve various industries, including oil & gas, marine, power generation, and rail/transportation. The company's manufacturing units hold two certifications: ISO 9001 Quality Management System Certification and ISO 14001 Environmental Management System Certification.
SPX Flow, established in 1912, is a manufacturer of industrial machinery to solve processing challenges based in Charlotte, North Carolina. The company manufactures various machinery such as mixers, pumps, valves, homogenizers, and heat exchangers. The machinery is used in nutrition, health, mining, construction, and chemical industries. The company provides services such as designing, engineering, and installing turnkey process units or full-scale plants. The SPX Flow brands include Anhydro, Bran+Luebbe, Gerstenberg Schrӧder, Pneumatic Products and Seital Separation.
Brandoni Valves, established in 1961, and based in Piedmont, Italy, is a manufacturer of industrial valves. Its diverse product line encompasses shut-off valves, check valves, joints, solenoid valves, and actuators. These quality products find application across diverse industries like water treatment, power generation, oil and gas, and chemical processing. The company's precision-crafted products are tailored to control and regulate fluid and gas flow, ensuring efficiency and quality in critical processes.
Watts was established in 1874 and is a manufacturer of water management products based in North Andover, Massachusetts, United States. The company offers various water solutions products such as automatic control valves, gas connection systems, pressure reducting valves, water quality parts, and high purity process piping systems. The products have been used for serving various industries such as healthcare, agriculture, hospitality, commercial, and municipal waterworks. The products have been created under compliance of CSA, NSF International, WQA, BSI, and AGA manufacturing standards.
Nencini Srl, established in 1967 and based in Italy, is a manufacturer of hydraulic valves. The company produces discharge valves for potable and irrigation water pipelines and air valves for hydraulic power plants. In 2022, the company becomes a member of the OMB Valves Group. The company's quality system complies with EN ISO 9001:2015, an international standard. The company specialised in air valves, needle valves, fixed cone valves, and butterfly valves. Every valve undergoes final workshop hydrostatic tests as per international standards.
Founded in 1890 in Missouri, Emerson Electric Co., is a technology and engineering company that provides various solutions for customers in industrial, commercial, and consumer markets globally. Business segments include automation solutions, AspenTech, and commercial & residential solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. The AspenTech segment provides asset optimization software for enhancing performance through a combination of modeling, simulation, and optimization capabilities. The Commercial & Residential Solutions segment offers residential and commercial HVAC products, system protector and flow control devices, and IoT thermostats.
Enerpac, since 1910, has been a manufacturer of advanced industrial tools and a service provider located in MenomoneeFalls, Wisconsin, USA. The company produces power units, machine moving tools, pipe blenders, tension meters, and load cells. It also created cutters, gantries, presses, cylinders, and strand jacks used in aerospace, bridges, automotive, mining, and power generation industries. The firm offers rental products, training, hydraulic education, and services such as bolting, tool crib inspection, and calibration. It has 8 manufacturing facilities in The Netherlands, USA, Spain, UK, China, and India.
SLB was founded in 1926 and is a manufacturer of oil products and equipments based in Houston, Texas, United States. The company manufactures various products such as geopolymer cement-free system, nested multistage compact wellhead, 3D-printed armor, dual-string barrier evaluation, and autonomous directional drilling. The products are used and applied in oil drilling industry. The company has obtained the ISO 14001 certificate in 2020 and complied to HAZWOPER standards for hazardous waste management.
Generant, established in 1930, and headquartered in Butler, New Jersey, is a manufacturer and supplier of valves, pressure regulators, and instrument tube fittings. The company's product range includes pressure relief valves, check valves, needle valves, shut-off valves, and pressure regulators. Catering to various industries such as industrial, medical, and cryogenics, the company's services comprise of quality solutions and technical expertise. Besides, its accreditations include ISO 9001:2015 for quality management, API 6D for pressure relief valves, FM Global Class 1 for fire protection valves, and ASME BPE for cryogenic valves. With a history spanning decades, they consistently uphold good products and services.
ABNOX AG is a manufacturer and supplier of clamping, metering, and lubrication products that was established in 1946 in Cham, Switzerland. The company’s product portfolio includes metering valves, material pressure regulators, dosing devices, and modular units for combining lubrication and metering components. It also offers hand-push pumps, oil-level windows for indicating levels of liquid in containers, and various clamps for gripping workpieces or tools. The company’s products are commonly used in the food processing, automotive, and chemical processing industries, as well as in industrial machinery.
KLINGER SCHÖNEBERG GmbH, founded in 2000 and based in Graben-Neudorf, Germany, is a manufacturer and supplier of ball valves. The company produces products such as automated ball valves, AB cocks, shut-off valves, and measuring instruments and supplies for the hydrogen and energy industry. The products of the company are used in different applications, including chemical, petrochemical plant, and mechanical engineering industries. The company holds DIN EN ISO 9001:2015 quality management certification to follow the set quality standards while manufacturing the products. The company also has CRN certification for all regions of Canada and TTC - Chinese Type Test Certificate.
Ohkura Electric Co., Ltd., started in 1933 and situated in Sakado, Japan, is a manufacturer and supplier of industrial instruments and semiconductor equipment. The company specifically fabricates system equipment, recorders, temperature controllers, signal converters, and mass flow controllers. It also manufactures furnaces, vertical heat treatment furnaces, pressure transmitters, and thyristor units. The subcategories of its system equipment, machine controllers, are controllers that integrate functions ranging from loop control to sequence control. Its industrial instruments are used in the automation of nuclear power plant systems as well as other industrial fields.
TECVAL is a Spanish manufacturer and distributor of industrial valves and fittings that was established in 1987 in Terrassa, Barcelona. The company’s product lineup includes various valves such as check, ball, and manifold models. It also offers a range of fittings including hose fittings, adapters, and couplings. These are primarily used for fluid handling applications and desalination operations. Aside from its products, the company provides custom design and production services for unique projects, as well as technical support and after-sales services including personnel training and product maintenance.
KOSA Corp, operates as a manufacturer and supplier of industrial control valves, headquartered in Qingpu District, Shanghai, China. The company specializes in the production, research and development, sales, and services of industrial control valves. Its product offerings include a pneumatic diaphragm control valve, electric regulator valve, electronic control valve, self-operated regulating valve, and ultra-small flow regulating valve. These products are generally used for controlling the flow of liquids or gases. It has received the API6D certification from the American Petroleum Institute for its adherence to quality and safety in the production of its products.
Hi-Force, established in 1982 and based in the United Kingdom, is a manufacturer and supplier of hydraulic tools. The company produces other products such as hydraulic cylinders, tough lift jacking systems, bolt tensioners, hydro test pumps, and crimpers and cutters. Apart from this, the company also manufactures 2000 products and supplies to different industries. Apart from this, the company also caters to services such as short- and long-term rental tools, tool repairs, maintenance, and training services with ECITB-approved mechanical joint integrity certification.
Wenzhou Meric Hydraulic Technology Co. Ltd, established in 2010 and headquartered in Zhejiang Province, China, is a manufacturer and supplier of threaded cartridge valves. The company offers throttle valves, check valves, and relief valves which are widely utilized in engineering machinery, hydraulic power units, and other types of hydraulic systems. The company has has obtained the international Certificate of Intellectual Property Management System from ZBT and holds numerous utility model patent certificates.
Vatac Valves Wenzhou Corp, established in 1987 and headquartered in Wenzhou, Zhejiang, China, is a global manufacturer and supplier of industrial valve solutions. It offers an extensive line of materials, from conventional steel to special alloys such as Monel, Inconel, Hastelloy, and Duplex steel. Its product portfolio comprises ball valves, gate valves, globe valves, butterfly valves, and through conduit gate valves, adhering strictly to international standards like API, ASTM, ANSI, and ISO. The company holds CE certification and ISO 9001:2000 quality management system accreditation and operates within vast manufacturing facilities spanning over 500,000 square feet.
Viega Ltd., a company founded in 1899 and headquartered in Tewkesbury, England, is a manufacturer and supplier specializing in installation technology. The company's product portfolio includes piping technologies, Easytop system valves, and Advantix shower channels. These products are used in various sectors, including the construction industry, industrial plants, and healthcare facilities. The company provides services, including customized solutions tailored to meet the needs of individual customers or projects, technical support, and project planning support while exporting its products to various countries, including the United States, Taiwan, and Morocco.
WIKA Group was founded in 1946 and is headquartered in Klingenberg, Germany. The company serves industries such as food and beverage, power generation, refrigeration, and semiconductor, but is primarily known for medical equipment. The company’s six primary product market segments are Pressure, Temperature, Level, Force, Flow, and Calibration. In addition, the company offers Industrial IoT services including conditional monitoring and alarming, asset tracking, predictive maintenance, and process automation. The company also offers standard calibration, repair, and consultancy services in addition to providing online tools for customer assistance.
Rego GmbH, a Dover Company, established in 1908 and headquartered in Central Germany, is a Rego liquid and gas flow and control products distributor and supplier for the Middle East, Asia, and Europe. The company's products are manufactured in the USA and include LNG fueling components, valves and regulators for the propane industry, and cryogenic components also used in medical oxygen delivery systems. Its services include the full supply of all Rego products, product training sessions, and access to the company's warehouse system to see the direct availability of Rego products.
Tradinco Instruments is a Dutch distributor of calibration sensors and equipment that was established in 1963 in Zoetermeer, the Netherlands. The company’s product lineup includes pressure sensors, equipment test benches, and booster pumps for generating high pressure. It also offers various calibration services, as well as leak testing and inspection for customers requiring additional support. The company’s products are used mainly by clients in the oil and gas, food processing, and energy industries.
Paani Precisions, a supplier, prioritizes customer satisfaction through efficient services, optimal packaging, and cost-effective rates. Inquiries are encouraged for timely responses and personalized deals. The company is set in its pursuit of excellence in both products and services, known for its responsive customer service. Through ongoing innovation for quality and packaging enhancements, the company ensures timely shipments and reduced delivery issues. With an extensive nationwide network in India, it sources products at competitive rates as scheduled, offering a comprehensive range of solutions at competitive prices.
MULTI-COUPLING SYSTEM S.r.l., established in 1992, and headquartered in Lombardy, Italy, is a manfuacturer, supplier, and designer of oil-hydraulic and hydrodynamic groups and plants. The company offers high-pressure valves, high-pressure fittings, and high-pressure filters. It also supplies power and distribution units, test benches, quality control equipments. Its products are used in systems operating at high and very high pressures. Its special components are manufactured directly in-house by processing semi-finished stainless-steel products.
Mass Flow Online B.V. is the e-commerce channel of Bronkhorst High-Tech B.V., established in 1981 and based out of Apeldoorn, the Netherlands, and is a supplier of Bronkhorst products. The company's products include thermal mass flow meters, gas regulators, and accessories that include adapter sets, cables, and power supplies. These products are used in applications that include the production of electric cables and replacing traditional VA meters as purge meters. Its services include online and over-the-phone customer support, and it also provides commercial clients with accounts to make orders online.
UCT Fluid Solutions, founded in the United States in 2017, is a distributor of industrial and electronic products. It specializes in flow control and fluid management for high-purity and process control applications by developing components and custom solutions for hydrogen-powered vehicles, electrolyzers, filling stations, and more. The company also offers services like design for manufacturability, prototyping, advanced flow control solutions, and high-precision manufacturing to companies in the oil, gas, and energy industries.
Rainer Linz Oberflächentechnik GmbH, started in 1992 and based in Gablitz, Austria, is a supplier of surface technologies such as pneumatic extrusion pumps, plural component mixing, and glue mixing systems. It provides the accompanying software for its machines and also stocks mixing and dosing technology accessories such as dispense needles, flow meters, and injection valves. Its pneumatic extrusion pump can handle materials at a maximum temperature of 80°C, with delivery rates ranging from 1 to 24l/min. Its 2-component airless system ALP is a stainless static mixer with a maximum working pressure of 150 bar.
Holmatro, Inc., founded in the Netherlands in 1967, is a global supplier of high-pressure hydraulic rescue tools. The company has manufacturing facilities in the United States and the Netherlands. It serves customers worldwide, with divisions located in the Netherlands, USA, and China. Its products are predominantly used in rescue, special tactics, and industrial applications, ensuring effective and safe tools under all circumstances. It has centralized its research & development and product management teams in the Netherlands to ensure superior products. Its state-of-the-art manufacturing facilities are located in the Netherlands and in the USA.
Maximator GmbH, established in 1885 and headquartered in Nordhausen, Germany, is a supplier of high-pressure technology, testing technology, hydraulics, pneumatics as well as hydrogen technology. The company offers a range of products, from fittings to modular gas compressor systems. It also offers customer-oriented services such as burst pressure, autofrettage of components, and a large number of inspections on CNG. Its pumps are rugged, rebuildable, and can tolerate all installation positions. The company has TÜV certification for its valves, fittings, and tubing, serving diverse industries, including automotive, energy, chemical, and semiconductor industries.
MillCorp Industrial Sales, LLC was established in Corpus Christi, Texas in 2007. MillCorp Industrial Sales is a distributor of oilfield equipment, parts, and components to the oil and gas industry in the State of Texas. MillCorp Industrial Sales product types include valves and fittings, tubing, standard and digital pressure gauges, and thermometers. Industrial and relief valves include flow control, ball valves, spring-loaded relief valves, stainless steel pipe fittings, and others. The tubing includes linear low-density polyethylene tubing, austenitic, ferritic, and other varieties. Thermometers include gold case thermometers, industrial 5AS thermometers, and bi-metal thermometers.
Koehler Rubber & Supply Co. (Koehler) was founded in 1917 and operates out of Independence, Ohio. Koehler is a distributor for specialty fluid application products. Product offerings include spray finishing equipment, fluid pumping and handling, lubrication, hoses, sealants, adhesives, meter mix, dispense systems, spray systems, hydraulic & pneumatic equipment such as adapters and fittings, and measuring devices such as gauges and thermometers. Koehler also offers value-added services such as system design, service & repair, maintenance training, operator training, and efficiency analysis.
Guenther Supply Inc. began in the 1940s and officially founded in 1956. Guenther Supply Inc. offers products and services. Product offerings include pipe and tubing across carbon steel, stainless steel, alloys, copper, and PVC, fittings and flanges, valves, pipe support and hardware, hose and tubing products, piping specialty products, pipe insulation, plumbing and heating products, chemicals, and tools including threating, cutting tools, and drain cleaning equipment. Service offerings include valve actuation assemblies, air, water, and hydraulic hose assemblies, along with tool rentals.
Ranking as of December 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Hayward Flow Control |
3.3%
|
| 2 | Aalborg Instruments & Controls, Inc. |
2.9%
|
| 3 | MicroStrain, a LORD Company |
2.4%
|
| 4 | HORIBA |
2.4%
|
| 5 | Intertubi Spa |
1.9%
|
| 6 | F.LLI TOGNELLA S.P.A. |
1.9%
|
| 7 | Valve Check, Inc. |
1.9%
|
| 8 | Trico Corp. |
1.9%
|
| 9 | Ideal Valve, Inc. |
1.9%
|
| 10 | Hy-Lok USA, Inc. |
1.9%
|
Derivation Method
The ranking is calculated based on the click share within the needle valve page as of December 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
37 | 39.4% |
|
Germany
|
10 | 10.6% |
|
Japan
|
9 | 9.6% |
|
Italy
|
6 | 6.4% |
|
Spain
|
6 | 6.4% |
|
Taiwan
|
5 | 5.3% |
|
China
|
5 | 5.3% |
|
United Kingdom
|
5 | 5.3% |
|
India
|
3 | 3.2% |
|
Switzerland
|
2 | 2.1% |
|
Poland
|
1 | 1.1% |
|
Brazil
|
1 | 1.1% |
|
Denmark
|
1 | 1.1% |
|
Singapore
|
1 | 1.1% |
Israel
|
1 | 1.1% |
|
Netherlands
|
1 | 1.1% |
77 products found - Page 2
77 products - Page 2
SUMITOMO SEIKA CHEMICALS CO.,LTD.
260+ people viewing
Last viewed: 40 minutes ago
Standard Response
■ Characteristics ・ It is a flow -based squeezing valve (needle valve), not a pressure adjuster. ・ Please use it if you do not need fine adjustme...
2 models listed
IBS Co., Ltd.
210+ people viewing
Last viewed: 19 hours ago
Standard Response
4.0 Company Review
■ Features ・ By making the needle portion a non -rotating structure, smooth flow control is possible. ・ From the abundant needle lineup, you can ...
IBS Co., Ltd.
220+ people viewing
Last viewed: 5 minutes ago
Standard Response
4.0 Company Review
■ Features ・ While keeping the Needle function of the FMNV1 as it is, the product has been added by the multi -dial display, and anyone can easily...
Makizaki Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
Makizaki Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
Fluke Calibration
60+ people viewing
Last viewed: 4 hours ago
Fluke Calibration constant volume valves are pneumatically actuated needle valves with return piping connected to the inlet to a coaxial compensato...
Kawaki Measurement Industry Co., Ltd.
50+ people viewing
Last viewed: 1 day ago
■Model ・FS-C: Since the needle valve has a cap, it is difficult for others to touch it once the oil level is set. ・FS-N: The needle valve is an e...
Sanwa Enterprise Co., Ltd.
30+ people viewing
Last viewed: 4 hours ago
We offer a lineup of four main body materials: highly versatile PVC and C-PVC, glass fiber-filled polypropylene, and highly corrosion-resistant PVD...
Makizaki Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
Makizaki Co., Ltd.
20+ people viewing
Last viewed: 4 hours ago
A-Gas Japan Co., Ltd.
90+ people viewing
Last viewed: 3 hours ago
■Needle valve type gauge manifold kit ・This is an airtight manifold valve that reliably blocks the path with an O-ring and packing. ・Ideal for hi...
6 models listed
A-Gas Japan Co., Ltd.
100+ people viewing
Last viewed: 3 hours ago
■Features Needle valve manifold kit with gauge
6 models listed
A-Gas Japan Co., Ltd.
80+ people viewing
Last viewed: 8 hours ago
■Features Needle valve manifold kit with gauge
6 models listed
