V series
Holai
About This Product
Designed to crush large molded products quickly and powerfully.
Structure and principles
The V series is a powerful machine that can obtain the required granularity. The crushing is performed as the main powder of a shearing power generated between the rotating blade and the fixed blade.
Materials thrown from the top are discharged by passing through the lower screen. Here, the required granularity can be obtained by changing the diameter of the open hole in the screen.
In other words, the crushed material, which is larger than the diameter of the open hole, is lifted by a rotating blade, is repeatedly crushed, and is discharged after the size of the screen hole.
Open type of cooling effect and close type of power
The rotating blade of the crusher has an open form and a closed shape, and the V series offers three blades of the open flat cutter (type 3 blades) and three blades (C 3 blades) of the closed and flut cutter.
Open flat cutters have a high cooling effect, reducing the fever when crushing. Suitable for low -melting point crushing and hot material crushing.
In addition, when the air transport device is connected, the suction exhaust force is strongly effective. It is highly efficient for crushing light species.
The closed flat cutter is suitable for heavy gravitory crushing because of the high rigidity of the rotor.
V series that is powerful in various fields
Feature
1. Excellent gesture that crushes at once
The combination of the unique J -shaped wall and the maximum effective cutting point, and the large -diameter input will be exerted. Crush the big volume molded products and runa at once.
2.1 Demonstrates high performance above classes
Thorough pursuit of crushing characteristics such as light and bulky molded products and runa. A crusher with a short stay in the crushed room and has a large processing capacity. Demonstrates one class performance.
3. Promise clean granularity
The use of a knife that gains sharp shearing power reduces the period of stay in the crushed room. You can get a clean crushed product with low powder, fine grain, and "beard".
4. Easy cleaning and excellent maintenance
With a simple screen, you can smoothly adjust the screen, replace the knife, and adjust the clearance of the blade.
In addition, it is not necessary to disassemble the bearing portion when replacing the rotating blade, and the blade can be attached and detached by the set bolt.
In addition, by opening and closing the screen receiving and opening and closing the hopper, it is possible to safely and safely clean the punched room when changing the material and changing the color.
5. Demonstrate the maximum performance stably
0 type 3 blades / C type 3 blades can be selected according to the crushed crushing conditions, and the blade is in advance and detached, so even if grinding is repeated, the outer diameter is always optimal.
Processing capacity granularity is always stable.
6. Add economics to high performance!
A bolt -set blade is used for the rotating blade. As a result, the preliminary knife grinding cost is low, and the highly -built -in high -efficiency machine is highly consumed, so it boasts a small power consumption per process.
7. A different practical machine that makes use of the ingenuity
The box for storing the crushed product has a lid, so the dust scattering is very small.
Furthermore, the V-210V-360, VB-210, VB-360, VS-210 VS-360 type, so you can move freely.
8. Warning with a buzzer and lamp
The soundproof VB-210 VB-360 / VB-420 type has a level meter set in a crushed product box, etc., and warns with a buzzer and lamp when the crushed product is full.
9. Efficient system!
The VS-210 VS-360 is a high-performance small aircraft equipped with a runna exclusive screw so that large runners can be processed.
In addition, because the input position is low, it is ideal for immediate automatic crushing processing using robot and conveyor.
In addition, the aircraftfider can be immediately processed by inserting the sculfider portion into the lower part of the molded machine mold zone, so you can complete a reliable automatic crushing line without worrying about the crushed products.
Furthermore, if you adopt such a molding machine docking method, it has a large space -saving effect, you can effectively recycle the runna for immediate processing, and there is no need to worry about other ingredients and foreign substances.
10. Low noise and minimize high frequency sounds!
A steel plate with a sandwich structure with a special plastic as an intermediate layer is used for all models in the V series. Low noise has been realized.
In addition, high -frequency sounds are also reduced to a minimum, which is effective in preventing pollution and mental health.
-
Product
V series
-
Handling Company
Holai
11 Models of V series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Body caliber (valid) | Box | Electrical components | Fixed blade position | Hoppa | Introduction | Mechanical dimensions | Mechanical quantity | Number of fixed blades | Number of rotating blades | Rotating blade dimensions | motor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
V-210 |
Available upon quote | 250 × 180 (210 × 154) | About 51L | Overload protection and press buton switch | 45 ° inclination opposition 2 points | L type, K -shaped, Z -shaped (Dampa, flappa) | - |
W510 x L785 x H1455 (L -shape hopper) |
Approximately 260kg | 2 | 3 | φ160 x W210 x B1 |
Fully closed fan shape 200/220V 50/60Hz 4P / 2.2kw |
|
|
VB-210 |
Available upon quote | 250 × 180 (210 × 154) | About 43L | Overload protection and press buton switch | 45 ° inclination opposition 2 points | Double structure / L type, K -shaped (Dampa & Flappa) | - | W560 x L900 x H1570 | Approximately 450kg | 2 | 3 | φ160 x W210 x B1 |
Fully closed fan shape 200/220V 50/60Hz 4P / 2.2kw |
|
|
V-360 |
Available upon quote | 400 x 200 (360x170) | About 75L | Overload protection and press buton switch | 45 ° inclination opposition 2 points | L type, K -shaped, Z -shaped (Dampa, flappa) | - |
W780 x L960 x H1530 (L -shape hopper) |
Approximately 430kg | 2 | 3 | φ160 x W360 x B1 |
Fully closed fan shape 200/220V 4P/3.7kW |
|
|
VB-360 |
Available upon quote | 400 x 200 (360x170) | About 70L | Operation board (side embedded type) | 45 ° inclination opposition 2 points | Double structure, K -shaped (Dampa & Flappa) | - | W790 × L1090 × H1605 | Approximately 640kg | 2 | 3 | φ160 x W360 x B1 |
Fully closed fan shape 200/220V 4P/3.7kW |
|
|
V-420 |
Available upon quote | 460x280 (420 x 260) | About 100L | Automatic ⅄-△ Switch | 45 ° inclination opposition 2 points | L type, K -shaped, Z -shaped (Dampa, flappa) | - |
W1120 × L1165 × H1850 (L -shape hopper) |
Approximately 700kg | 2 | 6 | φ250 x W420 x B2 |
Fully closed fan shape 200/220V 4P/11kw |
|
|
VB-420 |
Available upon quote | 460x280 (420 x 260) | About 85L | Operation board (side embedded type) | 45 ° inclination opposition 2 points | Double structure, K -shaped (Dampa & Flappa) | - | W10100 × L1220 × H1935 | Approximately 900kg | 2 | 6 | φ250 x W420 x B2 |
Fully closed fan shape 200/220V 4P/11kw |
|
|
V-480 |
Available upon quote | 520x350 (480x330) | Approximately 146L | Automatic ⅄-△ Switch | 45 ° inclination opposition 2 points | L -shape, K -shaped (Dampa, flappa) | - |
W1120 × L1385 × H2330 (L -shape hopper) |
Approximately 1250kg | Four | 6 | φ300 x W480 x B2 |
Fully closed fan shape 200/220V 4P/15kW |
|
VB-480 |
Available upon quote | 520x350 (480x330) | About 109L | Operation board (side embedded type) | 45 ° inclination opposition 2 points | Double structure, K -shaped (Dampa & Flappa) | - | W1100 × L1565 × H2380 | Approximately 2000kg | Four | 6 | φ300 x W480 x B2 |
Fully closed fan shape 200/220V 4P/15kW |
|
V-561 |
Available upon quote | 560x450 (560 x 410) | Approximately 160L | Automatic ⅄-△ Switch | 45 ° inclination opposition 2 points | L -shape, K -shaped (Dampa, flappa) | - | W1292 × L1690 × H2740 | Approximately 2150kg | Four | 6 | φ400 x W560 x B2 |
Fully closed fan shape 200/220V 4P/22kW |
|
VS-210 |
Available upon quote | 550x250 (Fider diameter) | About 9L | Simple operation board | 60 ° inclination opposition 2 points | - |
Screw pushing in E -type full closed fan shape Gard motor 200/220V/4P/0.75kW |
W1400 x L845 x H900 | Approximately 350kg | 2 | 3 | φ160 x W210 x B1 |
Fully closed fan shape 200/220V 4P/2.2kW |
|
VS-360 |
Available upon quote | 550x250 (Fider diameter) | About 17L | Simple operation board | 60 ° inclination opposition 2 points | - |
Screw pushing in E -type full closed fan shape Gard motor 200/220V/4P/1.5kW |
W158 x L860 x H970 | Approximately 600kg | 2 | 3 | φ160 x W360 x B1 |
Fully closed fan shape 200/220V 4P/3.7kW |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Holai
View more products of Holai
