Mesh mill
Holai
About This Product
A trimming opportunity to make a clean fine particles
Structure and principles
"Mesh Mill" is a cutting method with a unique body structure. A fixed blade is set on a symmetry on the upper inclined slope of the main unit, and the blade corresponding to this fixed blade is set radially on the rotor. Both sides of the main unit are opened, and the screen is set here. In addition, the outside of the screen receiving is a passage for crushed products and suction air. Realizes a bearing structure with a low heat generation and a high heat dissipation effect. In addition, it has a body structure that can also use a water -cooled jacket.
Before the "mesh mill", the quantitative supply machine is usually connected, and the suction and exhaust air transport blower is connected. A temperature sensor is set in the emission duct portion, and if the temperature or current exceeds the maximum set value, the function supply from the quantitative supply machine is automatically stopped by the function of the temperature control circuit and current control circuit, and the supply is automatically started when the lower limit set is below.
The materials supplied from the top are crushed as the main powder of shearing power between the rotating blade and the fixed blade, and is discharged by passing through the screen below the screens.
In addition, the material of the opening hole or higher is lifted by a rotating blade, and after repeatedly crushed, the whole amount is finally discharged. At this time, the screens open hole diameter determines the final granularity, so that the necessary granularity can be obtained by replacing the screen. In addition, the suction power of the connected blower acts on the discharge of crushed products.
Feature
1 Unique structure that realizes high -efficiency crushing
2 Clean granularity by high -precision cutting
3 There is no need to worry about heat to change the material!
4 crushing of ending material with sharp cutting is also OK!
5 Energy saving type with small power consumption
6 Demonstrate stable performance with long life blades
7. Staff of granularity by screen
8 Easy to replace, adjust, and clean the knife
9 well connected to machines around the machine
10 Temperature sensor eliminates thermal troubles
-
Product
Mesh mill
-
Handling Company
Holai
4 Models of Mesh mill
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Blower Shizukaze pressure | Blower motor | Blower winds | Body caliber | Mechanical dimensions | Mechanical weight | Number of fixed blades | Number of rotating blades | Rotating blade dimensions | Rotating blade rotation speed | Rotating blade shape / number of blades | Winder style | Winding machine machine quality | motor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Hab-2542-25 |
Available upon quote | 3000pa | Complete closed type, 2P / 3.7kW | 15.0/23.0㎥/min | 140 x 460 (420) | W1400 x L685 x H1560 | Approximately 900kg | 2 sheets | 24 sheets | Φ250 x W420 x B3 | Approximately 2000rpm | Open blade set type, 8 blades | DF-5 | 120kg |
Full closed form 200/220V, 50/60Hz.4p, 18.5kw |
HA8-3070-40 |
Available upon quote | 4000/4600pa | Full closed, 2P / 7.5kw | 35.0/46.0㎥/min | 160 x 740 (700) | W1920 × L825 × H1950 | Approximately 1700kg | 4 sheets | 32 sheets | Φ300 x W700 x B4 | Approximately 1700rpm | Open blade set type, 8 blades | DF-10 | 160kg |
Full closed form 200/220V, 50/60Hz, 4P, 30kW |
|
|
|
HA8-3084-50 |
Available upon quote | 4000/4600pa | Full closed, 2P / 7.5kw | 35.0/46.0㎥/min | 160 × 880 (840) | W2060 x L825 x H1950 | Approximately 2500kg | 4 sheets | 40 | Φ300 x W840 x B5 | Approximately 1700rpm | Open blade set type, 8 blades | DF-10 | 160kg |
Full closed form 200/220V, 50/60Hz, 4P.37kw |
HA10-4084-75 |
Available upon quote | 4800pa | Full closed, 4P / 15kW | 70.0㎥/min | 160 × 880 (840) | W2490 × L1170 × H2325 | Approximately 4000kg | 4 sheets | 50 sheets | Φ00 x W840XB5 | Approximately 1300rpm | Open blade set type, 10 blades | NTV-20 | 550kg |
Full closed form 200/220V, 50/60Hz, 4P, 55kW |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Holai
View more products of Holai
