Z series
Holai
About This Product
Big volume molded products without difficulty
Structure and principles
The shearing force that acts between the rotating blade blade and the fixed blade is efficiently crushed as a main powder. Materials thrown from the top pass through the lower screen and discharge.
Replacing this screen will give you the required granularity. The crushed object, which is larger than the screen hole in the screen, is lifted by a rotating blade, repeatedly crushed, and is discharged by reaching the granularity below the screen of the screen.
The rotating blade of the Z-420 type is standardized with three blades of closed flat cutter and open flat cutter.
Closed flat cutters are suitable for heavy gravitory crushing with high strength (rigidity).
The open flat cutter has a cooling effect and has a low fever when crushing, and is suitable for crushing low melting point materials and crushing hot materials.
In addition, when the air transport device is connected, the suction exhaust force acts strongly, which is highly efficient for the crushing of light species.
The rotating blade of the ZA-50 series ZA-70 series adopts a unique "Ace Cutta".
This "ace cutter" is a kind of open cutter divided into small blocks, which combines strong toughness and high cooling effect (prevention of fever), and exerts small power and power by equal dispersion and reduction of crushed goods.
In addition, the ZA-50 series has an out-of-the-box J-shaped body, which has a great aging performance, and has a large processing ability, and an I-shaped body that efficiently and smoothly, and has a small load on the II type body.
Feature
1. Big volumes without difficulty processing
The J -shaped body has a large -diameter that makes the most of the diameter of the rotating blade and the total width, which demonstrates the excellent gathering and crushes a big volume molded product at once.
2. The thick plate seat is processed by the i -shaped body
There are many cases where thick plate sheets are on a fixed blade and cannot be processed smoothly. If you use the ZA-50 series I-shaped body, there is no fixed blade-up phenomenon of thick plates and seats, and you can process smoothly. The Zi-2060 type and Zi-2072 type using this type Iself body are also available in a separate series as a special wide Z-420.
3. Easy maintenance, cleaning speedy
By opening and closing the screen, you can simply replace and adjust the knife, replace the screen, and clean the internal cleaning. In the wide and ZA-70 series of the ZA-50 series, the air-operated hydraulic cylinder is set on the screen, so opening and closing can be simply operated by the valve operation.
4. Small fever, clean granularity
The "Ace Tutta", which efficiently performs the interior dispersion of the crushed material, is a unique oh, so it has a small heating of the pulver, and is advantageous for crushing low melting point materials and crushing hot materials. In addition, a clean granularity can be obtained because the rotation phenomenon at the place of the rotating blade is reduced and the rubbing between the materials is minimized.
5. Large processing capacity
In the J -shaped body, it does not miss the inserted and crushed material, so it can be used at a stretch, which demonstrates great processing capacity. I will do one or two ranks of the rotating blade diameter.
6. Power saving
It is highly efficient with small power to demonstrate a large baking performance with a small rotating blade. There is little power loss due to fever, and the power saving effect is outstanding.
7. Stable performance
The bolt -set blade is used for the rotating blade, so it is easy to replace the blade. Moreover, even if the grinding of the blade is repeated, the rotating outer diameter can be maintained at the best, so the crushing conditions are constant and the performance is always stable.
8. Low running cost
For bolt -set blades, maintenance costs (purchase costs and grinding costs) are low, and even if they are damaged or worn, replacement and grinding only in that part are sufficient. In addition, cooling water is not required because it uses a "ace cutter" with a small fever.
-
Product
Z series
-
Handling Company
Holai
11 Models of Z series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Body caliber (effective caliber) | Discharge | Fixed blade position | Introduction / supply | Number of fixed blades | Number of rotating blades | Rotating blade dimensions | Rotating blade format | mass | motor | screen | size |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Z-420 |
Available upon quote | 420 x 250 (420x220) | Box about 82L | 45 ° inclined direction 2 points | Hoppa Input L type, K -shaped (Dampa or Flappa) | 2 | 6 | ¢ 200xW420 × 2B | C type 3 blades or O type 3 blades | 630㎏ | Complete closed type 200/200V, 4P, 7.5kw | Manual opening and closing screen screen receiving set set |
W1200XL1080XH1500 (including 1700 Dampa axes) |
ZB-420 |
Available upon quote | 420 x 250 (420x220) | Box about 77L | 45 ° inclined direction 2 points | Hoppa introduction double structure ・ K type (Dampa & Flappa) | 2 | 6 | ¢ 200xW420 × 2B | C type 3 blades or O type 3 blades | 900㎏ | Complete closed type 200/200V, 4P, 7.5kw | Manual opening and closing screen screen receiving set set | W1050XL1235XH1615 (including 1770 Dampa axis) | |
|
|
ZA-7090 |
Available upon quote | 700 x 900 (650x900) | Windowers connection |
30 ° inclined direction 2 points (Horizontal, 15 °, 45 ° is also possible) |
Hoppa Input K type (Dampa or Flappa) | Four | 1800% | ¢ 700XW900 × 6B | A type 3 blade | 5,200㎏ | Full closed type 200/200V, 4P, 37-90kW | Electric pressure cylinder opening and closing screens receiving set set | W1805XL2200XH3560 |
|
|
ZA-561 |
Available upon quote | J: 560 × 560 (560x560) I type: 560x450 (560x380) | Box about 180L | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | Four | 12 | ¢ 500XW560XB4 | A type 3 blade straight blade or helical blade | 2,900kg | 200/220V, 4P, 22kw | Manual opening and closing type screen receiving set or air activated hydraulic cylinder opening and closing screen | W1347XL1990XH2720 |
|
|
ZA-562 |
Available upon quote | J: 560 × 560 (560x560) I type: 560x450 (560x380) | Approximately 210L box receiving box | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | Four | 12 | ¢ 500XW560XB4 | A type 3 blade straight blade or helical blade | 3,150kg | 200/220V, 4P, 37-75kW | Manual opening and closing type screen receiving set or air activated hydraulic cylinder opening and closing screen | W1367XL2230 × H2720 |
ZA-50701 |
Available upon quote | J: 700 × 560 (700x560) I type: 700x450 (700x380) | Box about 300L | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | Four | 15 | ¢ 500XW700XB5 | A type 3 blade straight blade or helical blade | 3,200kg | 200/220V, 4P, 22kw | Manual opening and closing type screen receiving set or air activated hydraulic cylinder opening and closing screen | W1487XL1990 × H2850 | |
|
|
ZA-50702 |
Available upon quote | J: 700 × 560 (700x560) I type: 700x450 (700x380) | Box about 300L | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | Four | 15 | ¢ 500XW700XB5 | A type 3 blade straight blade or helical blade | 3,400kg | 200/220V, 4P, 37-75kW | Manual opening and closing type screen receiving set or air activated hydraulic cylinder opening and closing screen | W1507XL2230 x H2850 |
ZA-50842 |
Available upon quote | J: 840x560, I type: 840x450 | Box about 390L | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | 6 | 18 | ¢ 500XW840XB6 | A type 3 blade straight blade or helical blade | 3,600kg | 200/220V, 4P, 30-75kW | Air operation type hydraulic cylinder opening and closing screen receiver receiving set | W1647XL2230 x H2950 | |
ZA-50982 |
Available upon quote | J: 840x560, I type: 840x450 | Approximately 510L box | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | 6 | twenty one | ¢ 500XW980XB7 | A type 3 blade straight blade or helical blade | 3,800kg | 200/220V, 4P, 30-75kW | Air operation type hydraulic cylinder opening and closing screen receiver receiving set | W1787XL2230 × H3050 | |
ZA-501122 |
Available upon quote | J: 1120x560, I type: 1120x450 | Box about 650L | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | 8 | twenty four | ¢ 500XW1120XB8 | A type 3 blade straight blade or helical blade | 4,000kg | 200/220V, 4P, 30-75kW | Air operation type hydraulic cylinder opening and closing screen receiver receiving set | W1927XL2230 × H3150 | |
|
|
ZA-501402 |
Available upon quote | J: 1400x560, I type: 1400 × 450 | Approximately 860L box | 45 ° inclined direction 2 points | Hoppa Input K type (two -stage flappa) | 8 | 30 | ¢ 500XW1400XB10 | A type 3 blade straight blade or helical blade | 5200kg | 200/220V, 4P, 30-75kW | Air operation type hydraulic cylinder opening and closing screen receiver receiving set | W2218XL2265XH3400 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Holai
View more products of Holai
