BO series
Holai
About This Product
The BO series has a popular ease of handling!
A unique structure that efficiently and crush the film sheet efficiently.
● Structure and principle
The BO series has two names set to the top of the fixed blade to the upper part that is inclined 30 ° from the horizontal axis, and has a unique body structure in which a screen that determines the discharge granularity is set on both sides on both sides of the main unit.
First, films and seats supplied from the top are pulled into the powdered room by a rotating blade, and then the shearing force that acts between the rotating blade and the fixed blade is crushed as the main crushing power.
Those who reach the granularity below the screen hole are discharged by the self -weight and the connected air transport blower suction power. In addition, large fragments with a hole or more are lifted with a rotating blade, and after being crushed again, the whole amount is discharged.
Therefore, the exhaust granularity is determined by the open hole diameter of the screen that can be freely replaced.
･ Open flat cutter of the BO series that enables high -efficient crushing
High -efficiency crushing is the condition that the rotating blade and fixed blade are sharp and the clearance of the double -edged tip is small, which reduces the negative elements such as fever. The BO series uses a sharp open flat cutter with a good blade with good air distribution. The cooling effect is high, the mechanical material is small, and the low melting point material can be crushed, and the suction power of the connection blower acts strongly, enabling high -efficiency crushing with quick emissions.
Film and sheet crushing machine BO series!
● Features
1. Compatible with any film sheet
The BO series is a dedicated machine that is dedicated to the crushing film and seats. It can be adopted as inline and off -line machines regardless of hard, soft, thick, or thin.
2. Large processing with small energy
The BO series, which has a large part of the effective area of the granularity regulation screen, has an improvement efficiency. In addition, the adoption of an open flat cutter, whose inhalation by the connection blower acts powerfully, provides large processing power with small consumption power.
3. Clean granularity that makes use of ingredients
The sharp shearing force with an open flat cutter and a fixed blade acts in a right angle direction of the film and sheet, achieving a clean cut without rubbing.
As the staying time in the crushed room is short, we produce a fluid and fluid crushed product.
4. Trouble reduction with smooth flow
Even if a hard and thick film sheet is crushed, a fixed blade riding phenomenon can be supplied and crushed smoothly.
5. Reduction of heat effects on materials
The heat generation is small because the passing area of the suction air is large and the body format is smooth.
It does not have a thermal adverse effect on machinery and crushed materials.
6. Openable workability
Cleaning screen replacement of crushed rooms and knives adjusted and replaced quickly by opening and closing the intermediate zone. It is not necessary to disassemble the Hoppalor / Air Transport Prix Exhaust Department Duct Shoot of the Introduction / Supply Department.
7. Space -saving type without hassle
The installation space is minimal, even if you include a blower for suction emissions.
The maintenance space is also small.
Various grinding methods according to the application
A introduction method from Hoppa
Feeding from Hopper Manually
This is the simplest offline processing system hand -throwing from the hopper at the top of the crusher.
B Rolling Supply method by roll
TAKING IN by USE OF ROLLS
It is a method of picking up and supplying by a roll installed at the top of the hopper. There are two types: those who handle the ears of the film and seats by inline and take the raw offering offline.
C ears and air transportation method
Pneumatic Edge Conveyance System
The ears of the film sheet are handled in an inline, and the ears are supplied by air transportation.
For small lines where the granularity of crushed products is not so small, the suction type is one step directly, and the two -stage direct suction type is suitable for the medium -sized line that requires a small crushed product granularity. Also, if the transportation distance is long, the ezector system is the best.
D complex method
Composite system
This is a method that combines inline and offline. In parallel with the direct processing of the lines generated on the line, the shortage of the line reduction is supplemented with a film outside the line (ears, products, and irregular scraps).
-
Product
BO series
-
Handling Company
Holai
9 Models of BO series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Body caliber (valid) | Capacity index | Mechanical dimensions | Mechanical quantity | Number of fixed blades | Number of rotating blades | Rotating blade dimensions | Rotating blade shape / number of swords | Stand | motor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BO-210 |
Available upon quote |
250 x 160 (210x130) |
1 | W1070 x L580 x H900 | Approximately 230kg | 2 | 3 | φ160 x W210 x B1 | Type 0 /3 blades | Regular placed unifying stand (including blower) | 200/220V 4P. 3.7kw |
|
|
BO-360 |
Available upon quote |
400 x 200 (360x160) |
2 | W1370 x L675 x H1100 | Approximately 650kg | 2 | Four | φ200 x W360 x B1 | Type 0 /4 blade | Regular placed unifying stand (including blower) | 200/220V 4P. 7.5kw |
|
|
BO-480 |
Available upon quote |
520x240 (480x200) |
3 | W1915 × L725 × H1150 | Approximately 830kg | Four | 8 | φ250 x W480 x B2 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 11kw |
|
|
BO-2572 |
Available upon quote |
760 x 240 (720 × 200) |
Four | W2370 × L725 × H1150 | Approximately 1250kg | Four | 8 | φ250 x W720 x B2 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 18.5kw |
|
|
BO-3072 |
Available upon quote |
760 x 280 (720x240) |
Five | W2450 x L820 x H1300 | Approximately 1400kg | Four | 8 | φ300 x W720 x B2 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 22kw |
|
|
BO-3084 |
Available upon quote |
880x280 (840x240) |
6 | W2570 x L820 x H1300 | Approximately 1550kg | Four | 8 | φ300 x W840 x B2 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 22kw |
BO-30108 |
Available upon quote |
1120x280 (1080x240) |
8 | W2880 x L820 x H1400 | Approximately 1850kg | 6 | 12 | φ300 × W1080 × B3 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 30kW | |
BO-35108 |
Available upon quote |
1120x320 (1080x280) |
9 | W3160 x L890 x H1500 | Approximately 2700kg | 6 | 12 | φ350 x W1080 x B3 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 45kW | |
BO-35144 |
Available upon quote |
1480x320 (1440 x 280) |
11 | W3520 x L890 x H1600 | Approximately 3200kg | 8 | 16 | φ350 x W1140 x B4 | Type 0 /4 blade | Regular integrated assembly platform (with blower) | 200/220V 4P. 55kW |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Holai
View more products of Holai
